Unvented Water Heating. Zircon

Transcription

1 Unvented Water Heating Zircon

2 Unvented Water Heating Zircon Elson are a BDR Thermea company, and the UK s leading manufacturer of hot water solutions utilising rectangular combination tanks and thermal store technology. This expertise is now being recognised through our range of unvented hot water cylinders, the latest addition to our comprehensive portfolio of products. Designed with the installer in mind Fully indemnified design service Anode-free eliminating costly maintenance L shaped long-life Superloy immersion heater reaching deeper into the tank to deliver increased hot water volume Superloy immersion heaters as standard High performance coil-in-coil heat exchanger Exceeds CHeSS* Best Practice for insulation and heat recovery Providing your customers hot water needs, the new Zircon cylinder range ensures the best possible performance powerful mains pressure showering and fast filling baths, whilst delivering reliability and efficiency. Using the most advanced technology available, from Duplex stainless steel cylinder construction for maximum strength and corrosion resistance, CFC/HCFC-free injected foam to ensure best possible heat efficiency, primary coil and cold water controls design giving rapid reheat and good flow rate performance. Backed by a 25 year guarantee with on-site service support. Being part of one of Europe s leading heating groups, Elson offers you first class customer service; guaranteed specification advice on product selection and system type, a fully indemnified design service and installation support and guidance on how to get the optimum performance from your system. Duplex stainless steel giving maximum strength and corrosive resistance Pressure tested to 15 bar Second purpose-designed solar coil for maximum efficiency, compatible with most UK solar systems Electrical protection rated at IPX2 Products tested and compliant with EN :2002 and EN :2003 * CheSS Central heating system specifications. 2

3 Construction The Elson cylinder range is constructed from strong and lightweight Duplex stainless steel to allow ease of handling on site, whilst offering exceptional corrosion resistance particularly in aggressive water areas, compared with some forms of stainless steel and glass-lined steel. With no sacrificial anode to replace regular maintenance is kept to a minimum. Every Elson cylinder is tested to 15 bar in its manufacturing plant, giving flexibility whether in a domestic or commercial application. Foam insulation measuring 50mm (CFC/HCFC-free ODP zero) is available on all models to give improved insulation standards. Our cylinders are finished in modern and robust white plastic-coated corrosion-proofed steel, cased with grey high impact thermoplastic top and bottom mouldings. Performance Indirect models are designed to offer high output coil-in-coil heat exchangers rating from 12.5 to 19kW allowing high efficient transfer of energy whilst its position in the base of the cylinder maximises the amount of hot water heated, and the cold water controls design delivers good flow rate performance. The Elson cylinder range gives mains pressure hot water for a balanced supply to showers and mixers without the need for a shower pump. Installation Designed with the installer in mind all plumbing and electrical connections are located easily to give maximum access. Plumbing connections are 22mm compression. Capacities range from 120 to 300 litres on the standard models and 190 to 300 litres on the solar models. With no cold feed cistern required the cylinder can be installed in an airing cupboard, loft, cellar, utility room or even in a garage. 25 YEAR GUARANTEE MADE IN THE UK 3

4 Dimensions and ordering Zircon Indirect Zircon Direct Model 120zi 150zi 170zi 210zi 250zi 300zi Part code 93:050:001 93:050:002 93:050:003 93:050:004 93:050:005 93:050:006 Model 120zd 150zd 170zd 210zd 250zd 300zd Part code 93:050:011 93:050:012 93:050:013 93:050:014 93:050:015 93:050:016 Ø550 Ø550 A B 595 A B Model 120zi 150zi 170zi 210zi 250zi 300zi Capacity (litres) Dimension (mm) A B Element rating (kw) 1x 3 1x 3 1x 3 1x 3 1x 3 1x 3 Weight (kg) Empty Full Standing heat loss per day (kwh/24h) Model 120zd 150zd 170zd 210zd 250zd 300zd Capacity (litres) Dimension (mm) A B Element rating (kw) 2x 3 2x 3 2x 3 2x 3 2x 3 2x 3 Weight (kg) Empty Full Standing heat loss per day (kwh/24h) Specifier Advice Line specifier@elsonhotwater.co.uk 4

5 Dimensions and ordering Zircon Solar Indirect Performance Indirect Using primary heating coil Model 120zi 150zi 170zi 210zi 250zi 300zi Primary Flow (l/min) Heat Up Time (mins) Hot Water Capacity (volume of water >40 C) Capacity Available as Hot Water (%) Coil Output (kw) Direct Using element only Model 120zd 150zd 170zd 210zd 250zd 300zd Heat Up Time (mins) Hot Water Capacity (volume of water >40 C) Capacity Available as Hot Water (%) Model 190zsi 210zsi 250zsi 300zsi Part code 93:050:007 93:050:008 93:050:009 93:050:010 Solar indirect Using primary heating coil Model 190zsi 210zsi 250zsi 300zsi Primary Flow (l/min) Heat Up Time (mins) Hot Water Capacity (volume of water >40 C) Capacity Available as Hot Water (%) Auxiliary Coil Output (kw) Auxiliary Volume (litres) Solar Coil Output (kw) Solar Volume (litres) A C D B Ø Performance notes Indirect cylinders tested in conformance with BS EN 12897:2006. Coil performance in kw, calculated as per A.5.2 in conformance with BS EN 12897:2006. Heat up time from cold through 45 C, with a primary flow rate 15 l/min at 80 C ± 2 C. Hot water capacity using a domestic flow rate: 120 to 250 litre volume, flow rate of 15 l/min. 251 to 300 litre volume, flow rate of 30 l/min. Calculated as per A.4.1 in conformance with BS EN 12897:2006. Direct heating times assume use of lower element only, from cold, through 45 C Model 190zsi 210zsi 250zsi 300zsi Capacity (litres) Dimension (mm) A B C D Element rating (kw) 1x 3 1x 3 1x 3 1x 3 Weight (kg) Empty Full Standing heat loss per day (kwh/24h) Selection guide Application Indirect Direct Solar Indirect Bedsit 120zi 120zd 190zsi 1 bedroom, 1 bath & shower 120zi 150zd 190zsi 2 bedroom, 1 bath & shower 120zi 170zd 210zsi 3 bedroom, 1 bath & shower 150zi 210zd 250zsi 4 bedroom, 1 bath & shower 170zi 210zd 300zsi 4/5 bedroom, 2 bath & shower 210zi 250zd 300zsi 4/5 bedroom, 3 bath & shower 250zi 300zd 300zsi Light commercial use 300zi 300zd 300zsi Sizing in accordance with BS6700. This selection chart is for guidance only. Hot water requirements will vary dependent on bath size and usage patterns. Please contact the Specification Advice Team for further advice. Specifier Advice Line specifier@elsonhotwater.co.uk 5

6 Specification and installation Specification Nominal Capacities Indirect models: 120, 150, 170, 210, 250 and 300 litres. Direct models: 120, 150, 170, 210, 250 and 300 litres. Solar Indirect models: 190, 210, 250 and 300 litres. Element Long-life Incoloy 825 sheathed element, incorporated into an easily-removable heater plate, should replacement be necessary. Rated 240V. Outer Casing White plastic-coated corrosion-proofed steel with grey high impact thermoplastic moulded top and bottom covers. Thermal Insulation CFC/HCFC-free (ODP ZERO) fire retardant expanded polyurethane. 50mm thickness. GWP 3.1 (Global Warming Potential). Inner Container Duplex stainless steel, pressure tested to 15 bar. Primary Coil 22mm diameter stainless steel. Coil-in-coil design for improved performance. Rated to 10 bar. Purpose designed solar coil 1.1m 2. Thermostat Capillary type thermostat & thermal cut-out on all models. Direct Models: Element thermostat adjustable 12 C to 68 C. Manual resettable thermal cut-out, set to 85 C. Indirect Models: Primary thermostat adjustable 12 C to 68 C. Manual resettable thermal cut-out, set to 85 C. Solar Models: Manual resettable thermal cut-out, set to 85 C. Safety Features Temperature and pressure relief valve, factory-set to operate at 10 bar, 90 C-95 C. Anode None required. Approvals BEAB and Nemko approved. Kiwa approved to the UK Water Supply Regulations. Kiwa approved for Building Regulation G3. CE marked. Manufactured in the UK in an ISO 9001:2008 and ISO 14001:2004 registered factory. All indirect units in compliance with BS EN 12897:2006. Guarantee On-site service support including parts and labour for 12 months from date of installation. After the initial 12 months, a guarantee will apply for a further 24 years for the stainless steel inner vessel only. During this 24 year period, in the event of a cylinder leak, a replacement product will be issued provided that the replacement is carried out by one of our heateam engineers, for which reasonable labour charges will apply. The guarantee is valid provided that: It has been correctly installed as per the instructions contained in the instruction manual and all relevant Codes of Practice and Regulations in force at the time of installation. The Benchmark Checklist has been completed upon commissioning and the Benchmark Service Record is completed for each service. It has not been modified in any way, other than by Elson. It has not been frost damaged. It has only been used for the storage of potable water. It has not been tampered with or been subjected to misuse or neglect. The fault is not scale related. Within 60 days of installation the user completes and returns the certificate supplied along with the proof of purchase to register the product. It has been installed in the United Kingdom. The fault is not caused by high chloride levels in the water supply or incorrect disinfection methods. Maximum permissible chloride level 250mg/l (PPM). The expansion vessel and cold water controls are guaranteed for a period of 5 years from the date of purchase. Evidence of purchase and date of supply may be required. The guarantee is transferable. This guarantee does not affect your statutory rights. Installation Unvented units over 15 litre capacity must be installed by a competent installer in accordance with Local Regulations: England & Wales Building Regulation G3. Scotland Technical Standards P3. N. Ireland Building Regulation P5. Fixing Feet on bottom moulding for floor mounting. Plumbing Connections Inlet / Outlet 22mm compression fittings / ¾" BSP parallel thread. Fittings Compression nuts and olives included. Indirect Coil 22mm compression fittings / ¾" BSP parallel thread. Temperature and Pressure Relief Valve 15mm compression outlet. Cold Water Control Integrated cold water control set comprising pressure reducing valve and strainer factory set at 3.5 bar. Expansion relief valve factory set at 6 bar and check valve. 22mm compression fittings. A 2-port motorised valve is supplied with Indirect models. Flow Rates Up to 55 6 bar pressure. Operating Pressure 3.5 bar. Expansion Relief Valve Pressure 6.0 bar. Operating Temperature Recommended 60 C. Adjustable from 12 C to 68 C. Water Expansion Remote expansion vessel 12 litre vessel supplied with 120 and 150 litre models. 18 litre vessel supplied with 170 and 210 litre models. 25 litre vessel supplied with 250 and 300 litre models. Solar indirect remote expansion vessel 18 litre supplied with 190 and 210 models; 25 litre supplied with 250 and 300 litre models. The expansion vessel is pre-charged to 3.5 bar. Minimum Water Supply Requirements Recommended minimum supply pressure 1.5 bar/20 l/min flow rate. If there are any doubts about water supply pressure or flow rates, please contact our Specification Advice Team to discuss. Secondary Circulation Via 22 x 22 x 15mm swept tee, which should be fitted to the inlet pipework. Secondary circulation is NOT recommended for direct electric units being used on off-peak electricity tariffs. Pressure Testing Units are tested to 15 bar. Compatible Boilers Electric, gas or oil fired open vent or sealed system type, fitted with integral control thermostat and cut-out. A pumped supply to the primary coil is required. Tundish 15mm compression inlet and 22mm compression outlet. Electrical Direct Models: Connection is to the combined thermostat/thermal cut-out, housed within the integrated controls housing. The electrical supply must be permanently connected via a double pole linked isolating switch with a minimum break capacity of 13A. Indirect Models: Controls should be wired to the boiler, programmer etc. in accordance with the control scheme being used. All electrical wiring must conform to the latest IEE Wiring Regulations. 25 YEAR GUARANTEE MADE IN THE UK Specifier Advice Line specifier@elsonhotwater.co.uk 6

7 Schematics Indirect model CWS P 250 and 300 models only Control & Limit Stats AAV Gas Direct model CWS Solar Indirect model AAV S CWS P Control & Limit Stats Limit Stats S Gas S Key Pump Lock Shield Valve Flow Setter Thermostatic Radiator Valve Combined Isolation & Check Valve with Thermometer Aqua Aqua Stat Single Check Valve Drain Cock Automatic Bypass Valve Radiator Lock Shield Valve P Room Stat Pressure Gauge Assembly Double Check Valve Strainer Safety Valve Filling Loop Programmer Thermostatic Mixing Valve Double Reg. Valve T & P Valve Flexible Connection Air Separator Anti-Gravity Dip Pressure Reducing Valve Angle pattern Drain Cock AAV Automatic Air Vent Flow Meter Tundish Safety Discharge Vessel Isolation Valve Expansion Vessel 2 Port Motorised Valve Stop Cock S Temperature Sensor Immersion Heater The hydraulic schematics within this document are for guidance only and do not constitute system design. Some components may not be detailed for clarity purposes. Specifier Advice Line specifier@elsonhotwater.co.uk 7

8 Elson Off-Site Elson is one of the UK s leading providers of packaged Hot Water and Heating solutions. Our standard and tailor-made pre-plumbed packages from BDR Thermea s portfolio, provides house-builders, developers and specifiers with compact easy to install complete heating and hot water systems. Assembled at our factory and arriving on site, all systems are installation ready, giving an aesthetically pleasing, well-designed consistent system which takes up the minimum amount of space. Why Choose Elson Off-Site? Technical design team Engineer site visits Reduction in site traffic All parts included Complementary technology Guaranteed integrity and system performance One supplier better logistics Maintenance costs reduced whole system servicing Shorter time spent on site Predictable completion dates not weather dependent Cost certainty Reduced risk of theft and damage Improves cashflow Consistently achieved quality in a factory controlled environment Reduces health and safety risks on site Less waste, less packaging Less storage space required Mainstream Packaged Solutions Packaged solutions have become increasingly more popular as demands for savings in the time spent on site, labour costs and on-site waste have increased. The constant need to control quality, monitor specification compliance and guarantee system performance, has also increased the demand for off-site fabrication. Our packages are supplied in modular format on robust frames, so when on site every installation is standardised and easy to connect to the system. Furthermore, every package is designed to ensure that access to all components, for on-going maintenance, is straightforward and convenient. Packages can comprise of: heateam is Elson s very own service division. With us on your side, you can be sure that your customers are in the very best hands. Totally committed to quality and safety, heateam is open 7 days a week, for 363 days a year, and offers: Dedicated Trade Advice Line Our helpful and qualified specialists are always on hand to help you with even the most complex technical query. Installer Priority Call-Outs Our 280 strong team of specifically trained expert heating engineers covers the UK, no one is better qualified to look after Elson s products for the duration of the guarantee. Fully Stocked Vans A nationwide fleet of vans, fully stocked with spare parts meaning we can repair our appliances on the first visit in 95% of call-outs. Exclusive Service Plans Heateam also offer Elson s customers a range of exclusive annual service plans. Opening Times: Monday-Friday 8am-6pm, weekends and Bank Holidays* 8.30am-2pm. Simply call or visit our website at *Excluding Christmas Day and New Year s Day. Thermal stores Boilers District heating interface units Unvented cylinders mchp Underfloor heating manifolds and controls Heat and water metering Electrical distribution boards Telephone and broadband communications Space and services for a washing machine Heating control interfaces Solar and ground thermal water heating Air source heat pumps First fix rails The choice is yours the possibilities are endless! Amos Ayre Place, Simonside, South Shelds, Tyne & Wear NE34 9PE T: F: E: info@elsonhotwater.co.uk W: elsonhotwater.co.uk As part of the BDR Thermea group, interpart is one of the largest parts distribution businesses of its kind in the UK; handling the spares, accessories and consumables for a wide range of brands and meeting the expectations of its customers through a firm commitment to quality. interpart has developed the skills and experience in supply chain management, to get the part from the point that it is manufactured, direct to the engineer who fits it onto the appliance in the home of the end user. Giving the customer the right part, at the right time, first time, every time is achieved through interpart s extensive skills that have been developed across many areas of expertise. PN BJN FCN /01 The pace of product development is such that we reserve the right to change product specifications without notice. We do, however, strive to ensure that all information in this catalogue is accurate at the time of publication. Part no Issue 1 June 2011