1 Euronda EN Tutte le qualità Pro System Products, che cercavi, Process, Protection in un unica autoclave E10
2 Much more than just an autoclave E10
3 Euronda Pro System Products, Process, Protection Cleaning Packing Thermal disinfection Ultrasonic washing Thermosealing Sterilization rolls Eurosafe 60 Eurosonic 4D Eurosonic 3D Eurosonic Energy Eurosonic Micro Euromatic Plus Euroseal Valida Euroseal Euroseal 2001 plus Euroseal Check
4 Euronda Pro System is a Total Protection System (TPS) for dental practices that has been developed to ensure the safety of staff, patients, instruments and working environments. There are a number of steps in the sterilization process and it will only be successful if each one - from collection to storage - is carried out properly. Thanks to the Pro System line, it is possible to implement followed on a regular basis and increase the safety of a practice while optimizing its resources. Sterilization Autoclaves E10 E9 Next E9 Med Tests Traceability / Retrieving Water treatment Aquaosmo Aquabox Aquadist
5 E10 The must of Euronda sterilization, in one single autoclave
6 After years of research, we have developed an autoclave that combines all of the most important characteristics for dentists and dental assistants across the globe: E10 offers better performance in less time. It guarantees exceptional drying and minimizes water and energy consumption. It is not only attractive and quiet (< 50 db) but also intelligent: innovative technology makes E10 a simple, intuitive autoclave that can cater to the everyday needs of every dental practice. Performance The top Euronda sterilization system is powerful, it guarantees excellent drying and it is eco-friendly. Innovation The new E-Touch, E-Light, E-Timer, E-Help and E-Backup systems put technology at people s service. Design E10 s sophisticated, contemporary design brings aesthetic to a new stage. Ergonomics Increasingly user-friendly, with total harmony between the operator, the device and the working environment. Traceability The standard connectivity solutions and the print set options offer comprehensive, expandable traceability. Safety New systems guarantee exceptional sterilization quality at all times, from installation to maintenance.
7 A more powerful vacuum pump, a new instant steam generator and an optimized drying cycle make E10 the best performing Euronda sterilizer ever.
8 Performance The best Euronda sterilization, how you want it Best ever performance The vacuum pump is twice as powerful as the one in the E9 autoclaves and the drying cycle is faster, making E10 the best performing Euronda sterilizer ever. The new steam generator instantly produces the steam for the sterilization chamber, optimizing the water consumption in accordance with the load, making further cuts to the sterilization time and actually improving the quality of the steam generated. Customization First and foremost, E10 is a Class B autoclave that can run 5 different type B cycles (121 C, 134 C, 134 C Prion, 134 C Rapid and 134 C Rapid Prion) in full compliance with the UNI EN standard, as well as 3 test cycles (Vacuum, Helix, and Bowie and Dick). In addition, thanks to the password-activated Personal functions, it is also possible to run Light cycles (type N cycles - N134 and N121) and Light & Stock cycles (type S cycles - S134 and S121). Eco-Friendly assesses the actual size of each load and adapts the sterilization settings to guarantee savings in terms of water, energy and time.
9 E10 s polished, contemporary design is so attractive that you can proudly put it on display. A unique touch is added by the front of the device, which comes in an anthracite tone and takes autoclave aesthetics to a new level with its bold style. The 4 colour touch-screen display and the innovative coloured LEDs of the E-Light system give it a distinctive splash of colour. Every last detail of E10 was conceived to make it attractive and practical at the same time.
10 Design A new dimension in aesthetic appeal Sophisticated Solid, compact forms come together in a sophisticated, contemporary design with an anthracite front that adds a bold touch. It is so attractive that you can proudly put it on display. Futuristic E10 has a futuristic feel thanks to the stunning colour on the cutting-edge 4 touch-screen display and the LED lighting system in the handle compartment. Practical design Even the most functional features of E10 are designed to be not only attractive but also practical and effective.
11 Innovation Technology at people s service E-Touch Users can instantly take control thanks to the extremely user-friendly, cutting-edge 4 colour touch-screen display, which features a new set of clear, simple icons. The user interface has been specially designed to make everyday tasks faster and more E-Help This innovative guidance system helps operators to choose the right cycle for the instruments that they want to sterilize. Consequently, assistants can rest assured that they are selecting the most suitable cycle and there is no risk of making mistakes.
12 E-Light As well as adding visual appeal and helping to highlight the handle, the extremely useful, LED-based E-Light luminous progress bar in the handle compartment changes colour as it moves through the different stages of the sterilization cycle, providing you with valuable information at a glance. Green light End cycle, load sterile Yellow light End cycle, load wet for prompt use Red light Load not sterile E-Timer Make the most of your time! Thanks to the innovative E-Timer, you can set tests and sterilization cycles to start at whatever time you like, allowing you to save time and start the working day at full speed.
13 Traceability A new comprehensive traceability system E10 features a new comprehensive and expandable traceability system. Full details of all sterilization cycles can be saved on an SD Card and transferred to a computer with the standard Ethernet and Wi-Fi connections. If other devices from the Euronda Pro System (such as the Eurosafe 60 or the Euroseal Valida) are connected to the computer, the whole sterilization process can be monitored, validated and traced automatically. The E-Data system can connect one or more autoclaves to your management software for even more effective tracing of all cycles. In addition, with 3 different types of built-in printers available, E10 caters to a range of needs and allows you to save time completely safely. Print Set 1 Built-in thermal paper printer Print Set 2 Built-in adhesive label printer Print Set 3 External large-quantity labels printer
14 Comprehensive traceability Take your dental practice into the future. You can connect a number of autoclaves and the other Euronda Pro System devices to your management software, trace all data and attach the information to patient records. It is available for both Windows and ios operating systems and it is compatible with all of the top management systems on the market, such as Dios, Segosoft, Julie, Visiodent and Kodak. Validation and load release This function allows users to keep a digital record of the compliance of the sterilization process in both the loading phase and the unloading phase. The operator ensures that the pouches are dry and checks their integrity and the state of the instruments, while also making sure that the sterilization parameters are satisfactory. Optional printers E10 s expandable traceability system caters to a range of needs, with a selection of 3 different optional printers. E10 can satisfy the traceability requirements of any practice and guarantee compliance with the legally established safety standards.
15 Ergonomics Total harmony between operator, device and environment
16 Designed for your space E10 is easy to position on a work surface thanks to the adjustable supports. In addition, the new rear ventilation system means that it can be perfectly flush mounted in sterilization room units. Adaptable Adapt your sterilization system to suit your working habits: choose freely between the 18 litre and 24 litre versions of E10 in accordance with your practice s needs. Inspection System The tank compartment access system is extremely quick and simple. The upper cover is made of an innovative engineering plastic. It is held in place by a magnetic system which makes it easy to open to clean it easily and frequently. This guarantees safe sterilization that remains consistently effective in the long term. Modular structure The side panels are made of cutting-edge materials and they are extremely easy to remove. In addition, the components inside the machine are easily accessible and positioned in a logical manner. This helps to make maintenance easier, faster and more effective. Tank compartment access system Quick coupling on the front of the machine
17 Safety Guaranteed quality throughout its working life
18 Conductivity meter The built-in conductivity meter monitors water quality and, if it is not satisfactory, E10 informs the operator with special messages on the E-Touch display. Dirt Control System It is located in the hydraulic circuit and allows an exact separation of dirty and clean water. It makes the dirt easily flow in the used-water tank, so that the autoclave can work without problems. Air-water separator The air-water separator device, designed and built into the tank unit, is a real life saver for the vacuum pump. The pumps used on machines of this level are essential to achieve proper sterilisation, but are very delicate as they are in constant contact with flows containing high temperature steam, air, dirt and chemical waste from lubricating oils found on instruments being sterilised (wands, turbines). These streams are channelled into the separator device which separates the air from the other components before they enter the vacuum pump. This phase allows the pump to operate in ideal working conditions, Support software Euronda has developed a number of software applications to support technicians during the installation, diagnosis and maintenance processes. This helps to guarantee peak performance from E10 at all times while cutting assistance times and costs.
19 Starter kit Standard tray holder holder with a capacity of 5 standard aluminium trays. If rotated by 90, it can hold 3 sterilization cassettes. 5 trays included. Accessories Drainage pipes Sponge Tray removal handle Door adjustment handle Funnel
20 Optional print sets Print Set 1 Built-in thermal paper printer for those who wish to print and store the results of the sterilisation cycle on a paper copy. It can be installed onboard in a few simple steps on the front of the machine. Print Set 2 Built-in adhesive labels printer: safely tag your load. Install this simple printer device on board in a few easy steps. Save space and conveniently print your labels and bar codes. Print Set 3 External large-quantity labels printer kit for continuous production. Safely tag your load by connecting the printing device in a few easy steps. Can be used for both labels and bar codes. Sterilisation tests Tips To guarantee that the sterilisation cycle has been correctly carried out, Euronda recommends you run the check test to verify: The steam penetration capacity for hollow loads (Helix test, daily); Steam penetration capacity for porous loads (Bowie &Dick test, monthly); Maintaining of pressure vessel and hydraulic circuit pressure (Vacuum test, daily).
21 Optional tray holders Tray holder for sterilization cassettes Rounded steel tray holder designed to hold 5 standard aluminium trays*. If rotated by 90, it can hold 4 sterilization cassettes. Available for both 18-litre version (capacity: four 1 DIN cassettes) or 24-litre version (capacity: four 1 DIN cassettes + four 1/4 DIN cassettes). Tray holder for sterilization container Rounded steel tray holder designed to hold 5 standard aluminium trays*. If rotated by 90, it can hold one or more sterilization containers (max. capacity: 380 x 190 x 152 mm) * Only available for the 24-litre version * Trays not included *Trays not included XL tray holder kit XL rounded steel tray holder, with a capacity of 4 special aluminium trays*. * Only available for the 24-litre version * Trays included in the kit Universal support surface A steel support surface that is suitable for loads with greater dimensions. It can be installed directly in the boiler, after removing the tray holder provided. *Only available for the 24-litre version.
22 Water treatment systems Aquaosmo Aquaosmo is a system that uses reverse osmosis produces a large amount of water that is suitable for supplying autoclaves and all of the equipment in dental practices, in accordance with the EN standard (<15 connected. Aquaosmo is designed to be installed together with an Aquabox and connected directly to an autoclave. It can supply between 2 and 4 autoclaves at the same time which has a capacity of 12 litres. Aquaosmo does not need to be connected to an electrical power supply and it can be installed directly on a work surface or inside a unit. It can supply: 4 autoclaves Water production: 1 litre of water every 20 min. Min./max. supply pressure: 2 / 3 bars Conductivity of incoming water: Dimensions (wxhxd): 360 x 280 x 180 mm Weight (empty): 5.3 kg External accumulation tank Included in the kit Aquabox Included in the kit Nozzle Not included in the kit
23 Device that produces deionised water for the autoclave, in compliance with It can be connected to one autoclave. of water per minute. An indicator light shows the water conductivity level, allowing you to see at a glance when it s time to replace the resins. It can be equipped with an automatic shut-off device. It can be positioned on the worktop, inside a cabinet or it can be wall-mounted. The pack contains: two ion-exchange resin connection pipe, and a pipe and cable for connection to an autoclave. It can supply: 1 autoclave Water production: 1 litre of water per min. Overall dimensions (wxhxd): 390 x 455 x 145 mm Weight: 8.4 kg (when empty) Device that produces deionised water for the autoclave and other pieces of equipment in a dental surgery in compliance if the special optional connection pipe is used, it can supply two autoclaves at the of 1 litre of water per minute. An indicator light shows the water conductivity level allowing you to see when it time to replace the resins at a glance. The control on the front allows you to supply water manually. It can be equipped with an automatic shut-off device. It can rest on the worktop, inside a cabinet or it can be wall-mounted. The pack contains: two ion-exchange resin connection pipe, and a pipe and cable for connection to an Euronda autoclave. It can supply: 2 autoclaves Water production: 1 litre of water per min. Overall dimensions (wxhxd): 390 x 455 x 145 mm Weight: 8.6 kg (when empty)
24 Aquabox Aquabox is a device that allows Euronda autoclaves to be connected to an external supply of water that has already been treated. It is ideal for clinics that already have water treatment systems based on osmosis or other methods. It can be installed easily on all Euronda Class B autoclave models. Quality controls on incoming water are guaranteed for devices with conductivity meters. Overall dimensions (wxhxd): 100 x 100 x 50 mm Weight: 0.5 kg Aquadist Water distiller that boils water and condenses the steam to obtain distilled water. It distils 0.7 litres of water per hour. 4 litres capacity. It passes all safety tests, complying with all electromagnetic compatibility standard (2014/30/EU) and low voltage standard (2014/35/EU) requirements. Water production: 0,7 litre of water per hour Overall dimensions (Øxh): 230 x 360 mm Weight: 3.5 Kg
25 Sterilisation cycles B 134 B 121 Solid, porous and hollow, wrapped and unwrapped Solid, porous and hollow, wrapped and unwrapped. Particularly indicated for plastics, turbines and handpieces 18 l 24 l 18 l 24 l Temperature c c c c Pressure 2.16 bar 2.16 bar 1.16 bar 1.16 bar Sterilization time 4' 4' 20' 20' Drying time 15' 15' 15' 15' Total time with standard loads 21' 24' 39' 40' Maximum load solid/porous 4.5 kg / 1.5 kg 6 kg / 2 kg 4.5 kg / 1.5 kg 6 kg / 2 kg Personal functions (activation on demand with a password) Light & stock cycles** S 134 S 121 Sterilization of non-bagged or bagged solid products Sterilization of non-bagged and plastic or bagged solid products 18 & 24 l 18 & 24 l Temperature c c Pressure 2.16 bar 1.16 bar Sterilization time 4' 20' Drying time 15' 15' Total time with standard loads 17' 29' Maximum load solid/porous 4.5 kg / 1.5 kg 4.5 kg / 1.5 kg * Times are intended without drying. The times have a tolerance of +-5%. **
26 B 134 prion B rapid B 134 prion - rapid Prion cycle for wrapped and unwrapped solid, porous and hollow Rapid cycle for wrapped and unwrapped solid, porous and hollow For 1 tray instruments Rapid prion cycle for wrapped and unwrapped solid, porous and hollow For 1 tray instruments 18 l 24 l 18 l 24 l 18 l 24 l c c c c c c 2.16 bar 2.16 bar 2.16 bar 2.16 bar 2.16 bar 2.16 bar 18' 18' ' 15' 4' 4' 4' 4' 35' 37' 20' 23' 35' 37' 4.5 kg / 1.5 kg 6 kg / 2 kg 0.6 kg / 0.2 kg 0.6 kg / 0.2 kg 0.6 kg / 0.2 kg 0.6 kg / 0.2 kg Light cycles** N 134 N 121 Unwrapped solid instruments Sterilization of non-bagged and plastic solid products 18 & 24 l 18 & 24 l c C 2.16 bar 1.16 bar 4' 20' 4' 4' 18' 33' 4.5 kg 4.5 kg
27 Technical data E10-18L E10-24L Overall dimensions 460 x 455 x 610 mm (w x h x d) Weight (machine empty with basket) 47,5 Kg 50,5 Kg Power supply 230 V 50/60 Hz Absorbed current (output) 2350 W 10.2 A 2450 W 10.7 A Operating temperature C Operating altitude (leaving the loading cap free) * Minimum depth of the support surface 500 mm Minimum width of the support surface 460 mm Minimum space above the tank 0 mm leaving the loading cap free * For altitudes higher than 2000m, please contact Euronda SPA Noise level Weight per support area (tank full and chamber with max. load) Operating range 47,5 + 8,5 + 4,5 = 60,5 kg Load on each foot: 15,125 kg 50 db 50,5 + 8,5 + 6 kg = 65 kg Load on each foot : 16,25 kg Indoor use, Relative humidity 85% Maximum line-voltage deviation ±10% Installation category II, Pollution level 2 Useful Space 250 x 340 mm Øxd 250 x 440 mm Øxd Dimension and volume 180 x 160 x 280 mm (wxhxd) 180 x 160 x 380 mm (wxhxd) Water consumption volume Tank capacity (clean water / used water) 300 ml 5 / 3.5 litres Safety Device - Overpressure protection - Accidental door opening protections - Process appraisal system - Real-time self diagnostic system Compliance with harmonised standards EN EN ISO EN EN EN EN Documentation - User Manual - Declaration of conformity chamber - Declaration of conformity autoclave - Installation chart - Servicing handbook information - E10 Autoclave compliant with Directive 93/42/EC and addenda. - Class IIb device - Chamber compliant with PED Directive 97/23/EC ISO 9001, ISO 13485
28 Overall required space Useful Space E10-18L Useful Space E10-24L R
29 2017 Euronda Spa - credits: & Euronda Spa 2017 This catalogue cannot be copied, scanned or reproduced by any means. All rights reserved. Picture, description, quoting, dimension and technical data have to be considered as purely indicative. While maintaining the basic characteristics of the product, the manufacturer reserves the right to make any time with the sole aim of improvement.
Packing The purpose of the packing phase is to ensure that sterilized instruments will remain sterile for a certain amount of time, allowing a safe and hygienic storage. It involves putting instruments
Sterilization line E9 Inspection English E9 Inspection the autoclave you can trust Inspectionable and safe, it always guarantees you the best sterilization. The E9 Inspection is easy to use: the Process
The Premium-Evolution series The new benchmark for steam sterilizers Evolution The best made even better! Optimized tank concept! DRYtelligence optimal drying results at all times! Patented double jacket-
Professional sterilization systems Professional sterilization systems Newmed was created to satisfy the needs of customers who demand safety, reliability and simplicity all in one sterilization instrument.
CENTRAL STERILISATION Innovative, hardworking Sterilisation & Infection Control products perfect for your Central Sterile Supply Department DGM AND STERILISERS FROM 100 TO 1100 LITRES Made in Europe, DGM
Setting The Standards For A Safer Future 2018 / 2019 2018/2019 Excel Healthcare Ltd Catalogue Established in 1983 Excel Healthcare Ltd has grown to become one of the largest suppliers of bench top steam
Sterilizers N e w G e n e r a t i o n New Lisa 500 and 300 series, the arrival of a new concept Lisa 500 and 300 sterilizers provide «medical grade sterilization» in your dental practice for total security.
Kronos Class B Sterilizer NOW WITH OUR EXCLUSIVE * PATENTED TECHNOLOGY Meet the NEW Newmed Kronos Class B Sterilizer Good looking and elegant on the outside, but reliable and uncomplicated on the inside,
Midmark DentiSure sterilisers * NOW WITH OUR EXCLUSIVE PATENTED TECHNOLOGY *Total cycle times subject to operating conditions. Meet the NEW Midmark DentiSure Class B Steriliser Good looking and elegant
Product Description Azteca A-6615 is a fully automatic high-speed pre & post vacuum steam sterilizer. This model is an electrically heated sterilizer, which operates with saturated steam as a sterilizing
FN 032/055/120 DRY HEAT STERILIZERS / OVENS Three different sizes: 32, 55 and 120 liters. Temperature range: Ambient Temperature +5 C / 250 C. Designed for sterilization, drying and heating purposes. User
NC SERIES Bench Top Steam Sterilizers NC 23B - NC 23S/32S BENCH TOP STEAM STERILIZERS Small steam sterilizers are widely used for the sterilization of the products used for medical purposes, e.g in general
Tabletop 2340 EA-D Class S Autoclave 19 Litres Save time and improve efficiency in your clinic. Sterilisation in three simple steps: 1. Select the right program 2. Close the door 3. Press the Start Button
Introducing the latest model in Prestige Medical s first-class range of Advance autoclaves - Advance Pro. Advance Pro is a Class B sterilizer available in 16 or 22 litre capacity units, they offer superior
laboratory & sterilization technology NC 23B - NC 23S/32S BENCH TOP STEAM STERILIZERS Small steam sterilizers are widely used for the sterilization of the products used for medical purposes, e.g in general
Veterinary Autoclave Veterinary Autoclave The Anima autoclave sets high standards for speed, efficiency and performance for sterilizing. Highly efficient, yet compact, its capacity to process 6 full sized
Advance Advance Designed to give you more for your money with a high capacity for faster throughput: The Advance has a much bigger capacity than its main competitors and yet has one of the smallest footprints
Next M 9 & M 1 1 U LT R A C L AV E RELIABLE The Midmark and UltraClave Automatic Sterilizers - make sterilization reliable and efficient. Today, more than ever, you need reliable and easy to use products
Midmark Sterilizers Connect. Flow. Save. Better Patient Care. Better Business. Is it slow & unreliable? VetAssure has all the answers. 3 Great for the vet 3 Great for the veterinary nurse 3 Great for your
Top Loading Autoclaves (95, 120, 135 L) The Top Loading Autoclave range features: A choice of 63, 95, 120 and 135 litres models A fully programmable 5,7 Touch Screen Colour Controller Timed/Pulsed Free
Classic PodiaClave Podiaclave+ The PodiaClave+ is specifically designed for the clinic based podiatrists and chiropodists. Easy to use, reliable and cost-effective, its outstanding performance comes from
AUTOCLAVE STEAM STERILIZERS (BENCH TOP) Image: HS-1606VD Hanshin Bench Top Steam Sterilizer Small and easy to operate Three preset sterilization cycles Adjustable cycle presets Rapid heat up times Option
CLINOCLAV steam sterilizer AH-21 L AH-21 L Optional printer Advantages: Agar mode (40-80ºC) Programmable auto-start (24 h) Control software Program for liquids Connection to PC (USB) Heart probe (optional)
OT SERIES Bench Top Steam Sterilizers OT 18/23B OT 23/32VS OT 23S BENCH TOP STEAM STERILIZERS Small steam sterilizers are widely used for the sterilization of the products used for medical purposes, e.g
Advance Advance Designed to give you more for your money with a high capacity for faster throughput: The Advance has a much bigger capacity than its main competitors and yet has one of the smallest footprints
STERIDENT, STERIMAT, STERIMAT PLUS Compact and economic steam sterilizers designed for medical and dental departments, clinics and hospitals. Generation of small steam sterilizers protecting human health
PRODUCT GUIDE 2013 FOR THE BEST PRODUCTS AND THE BEST PROTECTION, GO DIRECT: www.eschmanndirect.com 01903 875 787 PROTECTION SUPPORT EXPERTISE Protection at our heart At Eschmann we re all about people
Instrument Processing Midmark Animal Health Products Midmark Sterilizers because your clients trust you. When your clients come to you, they are entrusting you with an important member of their family,
Matachana Low Temperature Steam and Formaldehyde 130 LF Sterilizer 1. Introduction Matachana model 130 LF is the result of an exhaustive research process based on the needs and suggestions of our customers
PRODUCT CATALOG PRE AND POST VACUUM CLASS B AUTOCLAVE www.biolabscientific.com PRE AND POST VACUUM CLASS B AUTOCLAVE Reliable and robust class B autoclaves intended to deliver highest quality of sterilization.
NC 100 Vertical Steam Sterilizer NC 100 VERTICAL STEAM STERILIZER NC 100 Vertical Steam Sterilizer is designed for the sterilization of textile, wrapped or packed materials, glass and liquid in operating
M9 M /M3 11/ Automatic Sterilizers What do you want in a sterilizer? n Patented, automatic-opening door for fast instrument drying n Fast and easy use for efficient instrument processing n Reliable and
COMINOX. SAFETY. TECHNOLOGY. DESIGN. COMINOX. 25 YEARS OF SAFE STERILIZATION. Ability and passion these are two basic elements, but there is more; commitment, investments, research and development round
SST2200 & Stainless Steel Steam Sterilizers SST1700 & Your new assistants Stainless Steel Steam Sterilizers a new complete line of small steam sterilizers. C.B.M. has merged its own experience in steam
Getinge WD15 Claro Washer-disinfector The clear choice 2 Getinge Insight is what makes the difference Every time we develop a new product, we base our design work on our deep insight into our customers
HYDRIM M2 The Hydrim M2 washer disinfector. Perfectly prepares large volumes of instruments for sterilisation. Safer for your staff, kinder to your instruments. HYDRIM WASHER DISINFECTOR If it isn t clean?
STERILAB Steam sterilizer with gravitation de-aeration (without vacuum pump) for laboratory purposes. Generation of small steam sterilizers protecting human health MMM Group BMT Medical Technology s.r.o.
LTE Scientific Ltd Touchclave-PL Porous Load Steam Sterilizer Touchclave-PL: the revolutionary new range of small capacity porous load sterilizers from LTE Scientific Developed to satisfy a growing demand
VS LD series vertical steam sterilizers Steelco vertical Steam Sterilizers VS LD series are designed to answer the typical sterilization needs of a laboratory: glassware, stainless steel instruments, culture
B - Rev.4.17-2014.06.04 0051 :. Pressure (Bar) Pressure (Bar) Pressure (Bar) Dear Customer, The autoclave is a device designed for water steam sterilization of small sized tools and professional equipment,
MST sterilizer overview MST medical steam sterilizers for 1 to 18 sterilization units 2 B-SAG July 2009 VEEX/MBE Medical steam sterilizers MST-H MST-H series with horizontal sliding doors Usable chamber
Large Steam Sterilizers for Life Sciences Large Steam Sterilizers for the Life Sciences Laboratory Line Large Steam Sterilizers for the Life Sciences Sterilization in a laboratory environment has its unique
A new wave in automated instrument washing and disinfection Introducing the new HYDRIM G4 WD series Taking control of your infection control The hazards of manual cleaning Hand scrubbing is increasingly
S CLASS The economically alternative to the "Vacuklav" series with its Euroklav 29 VS+, which, by reason of the instruments and the type of wrapping used there, require no "Class B" autoclaves. The Euroklav
Ritter CleanTec with LED Display BB 18 + BB 23 The CleanTec is available with an 18 to 23 liter chamber size and is a stand-alone autoclave with built-in water storage tank. It works with a fractionated
TECHNICAL SPECIFICATIONS FOR PLUSHER WDS 18 SERIES INSTRUMENT WASHER DISINFECTORS PRODUCT PLUSHER WDS 18 series instrument washer disinfectors are offered with single or double door formation with vertical
DEKO 25 Washer-disinfector WASHROOM SYSTEMS DEKO 25 The DEKO 25 has been designed to bring reliability, outstanding cleaning and disinfection performance and quality into one compact and economic washerdisinfector.
N - Rev.4.13-2014.06.04 0051 :. Pressure (Bar) Dear Customer, The autoclave is a device designed for water steam sterilization of small sized tools and professional equipment, and is widely used for medical
Washer disinfectors ML Series Small and Medium range Washer disinfectors for clinics & sub sterilization departments Washing/disinfection equipment for reusable medical instruments OLUSSI has developed
User Manual Steam sterilizer Vacuklav 24 B/L+ as of software version 5.15 Dear Dr. We should like to extend our thanks for the expression of trust in our company which you have displayed through the purchase
EZPlus Fully Automatic Sterilizers EZPlus Fully Automatic Sterilizers At Tuttnauer, our single focus on sterilization and infection control enables us to offer products to help practitioners meet today
A new wave in instrument washing and disinfection Introducing the HYDRIM G4 WD series Taking control of your infection control The hazards of manual cleaning Hand scrubbing is increasingly used less because
HYDRIM C51wd The Hydrim C51wd Washer Disinfector. Perfectly prepares instruments for sterilisation in as little as 19 minutes. Safer for your staff, kinder to your instruments. HYDRIM WASHER DISINFECTOR
Our experience in biomedical cold storage c For over 80 years Angelantoni has been producing a full range of freezers for the long-term preservation of biological samples used in scientific laboratories,
User Manual Steam sterilizer Vacuklav 24 B+ Vacuklav 30 B+ as of software version 5.15 Dear Dr. We should like to extend our thanks for the expression of trust in our company which you have displayed through
TECHNICAL SPECIFICATIONS FOR PLUSHER WDS 12 SERIES INSTRUMENT WASHER DISINFECTORS PRODUCT PLUSHER WDS 12 series instrument washer disinfectors are offered with single or double door formation with manual
cgmp STEAM STERILIZERS BMT is a member of the MMM Group, one of the world s leading suppliers of sterilization products with offices in over 20 different countries and manufacturing facilities in the USA,
Thank you for choosing the Biomega BioClave steam sterilizer. Your steam sterilizer has been CE certified and designed with durability, reliability, and safety in mind. It is your responsibility to install
Getinge 9100E Cart Washer-Disinfector Your safe, efficient and sustainable cleaning solution This document is intended to provide information to an international audience outside of the US. Peace of mind
Washer disinfectors MLC Series for transfer trolleys, sterile containers and bulky items MLC Series Washer disinfectors for transport trolleys, sterile containers and bulky items Saving time is a must!
PRODUCT CATALOG MEDICAL AUTOCLAVE www.biolabscientific.com MEDICAL AUTOCLAVE Designed for sterilization of solid instruments, medical class N autoclave is a non vacuum sterilizer which removes air from
STATCLAVE G4 - Chamber Autoclave OPERATOR S MANUAL 95-115362 CA EN R2. STATCLAVE G4 Operator s Manual, Copyright 2019 SciCan Ltd. All rights reserved. Manufacturer s Information and Customer Service Information
Getinge Quadro Tabletop Sterilizer Product Specification Getinge Infection Control is the world leading provider of solutions for sterile processing in the healthcare sector. We aim to ensure the highest
Getinge HS33 Article List General Specification Floor-standing steam sterilizer with 60 (1 STU) or 100 (1.5 STU) liters capacity Integrated printer, mounted on loading side. 8,5 color touchdisplay Avanti.
Is Happy To Present You With This Free Copy Of The Harvey Chemiclave 5000 Owner And Operator Guide Be sure to look to us when it is time to order parts and supplies for your Chemiclave Please Note: Even
Washer disinfectors > CSSD Range - Systems and Automations devoted to hygiene For the Environmentally conscious > CSSD solutions Unique automatic customized CSSD solution for a complete washing disinfection
M3 ULTRAf AST S IMPLICITY Midmark M3 UltraFast Automatic Sterilizer Exhale...and relax. The Midmark M3 UltraFast Automatic Sterilizer is everything you need in an autoclave. Sterilize unwrapped instruments
WASHER DISINFECTORS 2195 13485 14001 9001 About us Sümer A.Ş. was established in 1981 in Ankara to proved services in the medical device sector. It has aimed advancement since the day of its establishment
Touchclave R (Rob) 8/5/06 12:31 pm Page 1 LTE Scientific Ltd. Touchclave-R The dynamic new range of cylindrical-section autoclaves from LTE Scientific Touchclave R (Rob) 8/5/06 12:31 pm Page 2 2 An Introduction
Model 99 Chamber volume ( l ) Chamber dimensions (cm) (diam. x depth) Equipment dimensions (cm) (height x width x depth) 75 Ø40 x 57 115 x 61 x 77 127 Ø45 x 80 128 x 72 x 95,5 157 Ø50 x 80 128 x 72 x 95,5
Posizione logo Instructions for use LINA MB 201 11 ENG - Rev. 3.1 MB17 / MB22 Symbols Symbols displayed on the product and/or used in this manual: WARNING! Risk of injury ATTENTION! To prevent damage occurring
Your Health, our Technology AWD655 Instruments Washer Disinfector AWD655 AT-OS instruments washer disinfector AT-OS instruments washer disinfectors have been developed to meet hygiene standards: ISO Standard
Operations Manual Part Number: 470230-598 For Research Use Only Ph: 1-800-962-2660 - Web: www.wardsci.com Thank you for choosing our Bench top sterilizers. Prior to operating this instrument, please read
Testing Explained... in fact everything you need to know about but were too afraid to ask! v..0 Testing Packaging Storage Inspection Transport Sterilisation Cleaning Disinfection Traceability Washer Disinfectors
Atherton M4, M5 and M5-ISo Clean solutions in the CSSD Quality Management System Certified by DQS according to DIN EN ISO 9001: 2000 DIN EN 13485: 2003 Reg. No. 019906-01 M4, M5 and M5-ISo Flexible equipment
FEATURE SUMMARY Chamber volume from 20 to 30 liters Working pressure meets ASME and PED requirements Temperature range 05 C (22 F) to 38 C (280 F) 8 kw / 27 kw integral steam generator or external steam
Mocom S.r.l. reserves the right to modify the products illustrated in the photos without prior notice. 11/14 MH10GB141S00 Tethys H10 The Evolution of Disinfection easy, it s Mocom STERILIZATION FIRST STERILIZATION
DEKO 25 washer-disinfector DEKO 25 The DEKO 25 has been designed to bring reliability, outstanding cleaning and disinfection performance and quality into one compact and economic washer-disinfector. It