BRANDS & DISPENSE CATALOGUE 2017/18

Transcription

1 BRANDS & DISPENSE CATALOGUE 2017/18 Dispense Fonts Coolers & Pumps Water & Soft Drinks Beer Engines Lenses Glassware Taps & Handles Point of Sale Bespoke Design

2 ADS2 BRANDS & ANGRAM 3 Service and support Bespoke design and engineering Our multi-disciplinary design teams have the skills and expertise to deliver what s right for your brand. Project management Timely, effective and efficient project management. Global sourcing We have built a network of some of the best product specialists and materials suppliers in the world. Materials experience We offer the experience you need, working with various materials including diecast, metal fabrication, plastic, ceramic and resin. Flexbile manufacturing Our systems allow us to switch from low to high volume production quickly and without compromise. Global friendly solutions Our products are used worldwide, which means we offer a breadth of experience and valuable cross-sector insight. We are an ethical business We hold ourselves to the highest ethical standards and we expect our business partners to do the same. Dispense & branding solutions for the UK beverage industry Caring for the environment We comply with environmental standards, and are subject to an annual environmental compliance audit. Whether you are a brewer, brand owner, pub, club or bar, we aim to help you grow your business by selling more of what you brew or serve. These products are tried and trusted, and deliver the quality and performance that makes them the preferred choice within licensed retail outlets everywhere. Part of the Celli Group, we believe in quality, integrity and service, and thrive on customising our products to better meet your dispense and branding needs. Quality management We operate a robust Quality Management System, and are ISO 9001:2015 certified. Within this catalogue you will find a comprehensive range of fonts, beer engines, taps, tap handles, coolers, merchandising, glassware and more for craft beer, lager, cider, soft drinks, fruit juice, water and wine. And with competition fiercer than ever before, you can boost the effectiveness of many products further still with high impact branding that attracts consumers, enhances perception and stimulates the impulse to buy. And if you still cannot find just what you are looking for, we offer a bespoke product design service for when you need something new and unique. Call us today and let us show you how we can help. Logistics To complement our warehousing and distribution, we offer a host of extra services to reduce complexity and give you all the support you need.

3 BESPOKE DESIGN 5 Helping brands stand out from the crowd At ADS2 Brands and Angram, we specialise in bespoke design, delivering innovative, iconic and eye-catching products that help brands to raise their profile, enhance perception, influence choice and foster loyalty. Our experienced and creative design team will work with you to bring your ideas to life, or can create designs to an open brief or a defined specification. We offer all the resources you need, from in-house engineering, design definition and rapid prototyping through to production ready CAD, manufacturing setup and production. Committed to delivering the best products and service, our aim is to provide you with exceptional bespoke solutions that connect with consumers and deliver more impactful brand experiences. So, no matter what you need, the size of your brand or the scope of your budget, we will work with you to deliver a design that is functional, clearly communicates your brand s USPs and really stands out from the crowd - on time, on budget and on brief. Our experience extends to all areas of dispense and PoS, from fonts, beer engines and taps to new lighting systems and custom marketing materials. There s really no area where we cannot help. We use state-of-the-art software, 3D CAD, models and rapid prototyping to manage and communicate the design development process and ensure a smooth and timely journey through pre-production to manufacture.

4 EVERYTHING YOU NEED 7 Contents Metal & ceramic dispense fonts Wide range of designs and finishes available. Single and multi-tap options including T-bars. Clamped and through-the-bar fixing options. Many designs available with ice effect or condensation. Quality design and materials, used the world over. In-house bespoke design & print Take brand awareness and visibility to new heights. Full in-house design and engineering development. Unrivalled experience and manufacturing expertise. Design for local, regional and global markets. Specialist screen and pad (tampo) printing service. ADS2 BRANDS DISPENSE FONTS 08 ANGRAM DISPENSE FONTS 28 ANGRAM BEER ENGINES 33 ANGRAM BEER ENGINE HANDLES & NOZZLES 36 ANGRAM BEER ENGINE SPARES & ACCESSORIES 38 CERAMIC DISPENSE FONTS 40 CUSTOMISED CERAMIC DISPENSE FONTS 41 BEER COOLERS & ZEROTECH 44 SOFT DRINKS & JUICE DISPENSE 46 COSMETAL & WATER DISPENSE 48 AQUATEC DIAPHRAGM PUMPS 54 DRIP TRAYS & GLASS FRESHENERS 55 BAG-IN-BOX DISPENSE KIT 56 FREE-FLOW TAPS 58 VARI-FLOW TAPS 60 Plastic & stainless steel taps Leading tap innovation for over 50 years. Free-flow & vari-flow designs available. Tried, tested & trusted by the world s leading brewers. Plastic up to 70% cheaper than stainless steel taps. Ideal low-cost solution for emerging draught markets. Beer engines & hand pulls Angram is the world's leading name in beer engines. Around 75% of UK installs are Angram. Made from quality materials and to exacting standards. Selection of cylinder options to meet your requirements. Wide range of handles and branding options available. TAP & DISPENSE ACCESSORIES 62 TAP HANDLES 64 HANDLE & TAP CUSTOMISATION 68 BRANDED LENSES 70 BADGE HOLDERS 72 ANGRAM HOME BAR KIT 75 BRANDED GLASSWARE 76 We reserve the right to modify at any time the information regarding the products mentioned within this catalogue without prior notice. All dimensions are approximate and all photographs (which are not to scale) do not necessarily show the products in their standard specification. For additional information and full Terms & Conditions, please contact us directly.

5 ADS2 BRANDS DISPENSE FONTS ANGRAM DISPENSE FONTS 9 Most fonts in this catalogue can be supplied with various options... OTHER FINISHES AVAILABLE CHOICE OF FIXINGS LED BRANDING CONDENSATION OR ICE EFFECT Chrome finish Gold finish Copper finish Colour finish Simulated ice Multi-tap LED illumination Cool to tap Ice Condensation Depending on the font selected, options may be subject to minimum order quantity or not possible in certain combinations. Please contact us to confirm. Also, please note that accessories such as taps, handles, badge holders and branding lenses are sold separately. 375mm (h) through-the-bar 445mm (h) clamped-to-bar Cobra Cobra 2 1 out, plastic pipe 3/16" or 5/16". 1 x badge holder. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. 365mm (h) through-the-bar 435mm (h) clamped-to-bar 2 out, plastic pipe 3/16" or 5/16". 2 x badge holders. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. 195mm (h) through-the-bar 265mm (h) clamped-to-bar Cobra Plus Sml. 1 out, plastic pipe 3/16" or 5/16". 1 x LED pods. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. 285mm (h) through-the-bar 355mm (h) clamped-to-bar Cobra Plus Med. 1 out, plastic pipe 3/16" or 5/16". 1 x badge holder. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. To complement our dispense fonts we offer a wide range of free-flow and vari-flow taps, handles and accessories. See pages for details. All taps, handles and branding accessories shown are sold separately.

6 ADS2 BRANDS DISPENSE FONTS ANGRAM DISPENSE FONTS 11 CHROME AS STANDARD OTHER FINISHES CHOICE OF FIXINGS LED BRANDING CONDENSATION OR ICE EFFECT Contemporary Hi-tech 365mm (h) through-the-bar 435mm (h) clamped-to-bar 365mm (h) through-the-bar 435mm (h) clamped-to-bar 400mm (h) through-the-bar 470mm (h) clamped-to-bar 400mm (h) through-the-bar 470mm (h) clamped-to-bar Minimal Cobra Plus Lge. Cobra Plus 2 Cobra B3 Cobra B4 Glam Finishes 1 out, plastic pipe 3/16" or 5/16". 1 x LED pod. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. Suitable for ice effect or condensation. 2 out, plastic pipe 3/16" or 5/16". 2 x LED pods. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. Suitable for ice effect or condensation. 3 out, plastic pipe 3/16". 3 x LED pods. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. Suitable for ice effect or condensation. 4 out, plastic pipe 3/16". 4 x LED pods. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. Suitable for ice effect or condensation. A range of five iconic font finishes. Luxury (see above), Contemporary, Minimal, Hi-Tech and Wood (see right). Quality materials and processes. Effective font customisation. Please contact us for further details. Wood All taps, handles and branding accessories shown are sold separately.

7 ADS2 BRANDS DISPENSE FONTS ANGRAM DISPENSE FONTS 13 CHROME AS STANDARD OTHER FINISHES EASY TO INSTALL COOL TO TAP LED BRANDING MODERN STYLE 400mm (h) through-the-bar 470mm (h) clamped-to-bar 400mm (h) through-the-bar 470mm (h) clamped-to-bar 400mm (h) through-the-bar 470mm (h) clamped-to-bar 400mm (h) through-the-bar 470mm (h) clamped-to-bar 400mm (h) through-the-bar 470mm (h) clamped-to-bar Moon T LED Stainless steel font with chrome finish. 1 out, plastic pipe 3/16", 5/16" or 3/8". 1 x LED pod. Cool to Tap. Water recirculation (3/8") to tap point, 19mm external loom. Moon Stainless steel font with chrome finish. 1 out, plastic pipe 3/16", 5/16" or 3/8". 1 x LED pod. Cool to Tap. Water recirculation (3/8") to tap point, 19mm external loom. Moon C Stainless steel font with chrome finish. 1 out, plastic pipe 3/16", 5/16" or 3/8". 1 x LED pod. Cool to Tap. Water recirculation (3/8") to tap point, 19mm external loom. Moon L Stainless steel font with chrome finish. 1 out, plastic pipe 3/16", 5/16" or 3/8". 1 x LED pod. Cool to Tap. Water recirculation (3/8") to tap point, 19mm external loom. Moon R Stainless steel font with chrome finish. 1 out, plastic pipe 3/16", 5/16" or 3/8". 1 x LED pod. Cool to Tap. Water recirculation (3/8") to tap point, 19mm external loom. Need to serve extra cold? See page 44 for details of our undercounter beer coolers and Zerotech system or contact us for details. All taps, handles and branding accessories shown are sold separately.

8 ANGRAM DISPENSE FONTS ADS2 BRANDS DISPENSE FONTS 15 CHROME OR GOLD AS STANDARD OTHER FINISHES LED BRANDING CONDENSATION OR ICE EFFECT CHOICE OF FIXING OPTIONS 400mm (h) through-the-bar 470mm (h) clamped-to-bar 400mm (h) through-the-bar 470mm (h) clamped-to-bar 400mm (h) through-the-bar 470mm (h) clamped-to-bar 450mm (h) through-the-bar 520mm (h) clamped-to-bar 450mm (h) through-the-bar 520mm (h) clamped-to-bar 450mm (h) through-the-bar 520mm (h) clamped-to-bar Lotus 1 Lotus 2 Lotus 3 Falco 1 Falco 2 Falco 3 1 out, plastic pipe 3/16" or 5/16". 1 x LED pod. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. Suitable for ice effect or condensation. 2 out, plastic pipe 3/16" or 5/16". 2 x LED pods. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. Suitable for ice effect or condensation. 3 out, plastic pipe 3/16". 3 x LED pods. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. Suitable for ice effect or condensation. 1 out, plastic pipe 3/16" or 5/16". 1 x LED pod. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. Suitable for ice effect or condensation. 2 out, plastic pipe 3/16" or 5/16". 2 x LED pods. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. Suitable for ice effect or condensation. 3 out, plastic pipe 3/16". 3 x LED pods. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. Suitable for ice effect or condensation. All taps, handles and branding accessories shown are sold separately.

9 ADS2 BRANDS DISPENSE FONTS ANGRAM DISPENSE FONTS 17 CHROME AS STANDARD OTHER FINISHES EASY TO INSTALL COOL TO TAP LED BRANDING MODERN STYLE 400mm (h) through-the-bar 470mm (h) clamped-to-bar 375mm (h) through-the-bar 445mm (h) clamped-to-bar 400mm (h) through-the-bar 470mm (h) clamped-to-bar 400mm (h) through-the-bar 471mm (h) clamped-to-bar 401mm (h) through-the-bar 471mm (h) clamped-to-bar bespoke design service Valy Brass font with chrome finish. 1 out, plastic pipe 3/16" or 5/16". LED pod and downlight. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. Suitable for ice effect or condensation. Ery 1 out, plastic pipe 3/16" or 5/16". LED pod. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. Suitable for ice effect or condensation. Extreme 1 out, plastic pipe 3/16" or 5/16". LED pod. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. Suitable for ice effect or condensation. Tube 1 Stainless steel font with chrome finish. 1 out, plastic pipe 3/16", 5/16" or 3/8". LED illumination. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. Tube 2 Stainless steel font with chrome finish. 2 out, plastic pipe 3/16", 5/16" or 3/8". LED illumination. Water recirculation (3/8") to top of plinth (clamped-to-bar) or base of font (through-the-bar), 19mm external loom. We design and produce bespoke tap handles (some of which include illumination), that help brands stand out on the bar. Contact us for details. All taps, handles and branding accessories shown are sold separately.

10 ADS2 BRANDS DISPENSE FONTS ANGRAM DISPENSE FONTS 19 CHROME OR GOLD AS STANDARD CHOICE OF FIXING OPTIONS LED BRANDING CONTINENTAL STYLE 412mm (h) through-the-bar 4820mm (h) clamped-to-bar 417mm (h) through-the-bar 487mm (h) clamped-to-bar 417mm (h) through-the-bar Celine 1 1 out, plastic pipe 3/16" or 5/16". Water recirculation (3/8") to base of plinth (19mm external loom). Celine 3 3 out, plastic pipe 3/16". Water recirculation (3/8") to base of plinth (19mm external loom). Celine 5 Brass font with chrome finish. Through-the-bar only. 5-7 out, plastic pipe 3/16". Need to serve extra cold? See page 44 for details of our undercounter beer coolers and Zerotech system or contact us for details. All taps, handles and branding accessories shown are sold separately.

11 ADS2 BRANDS DISPENSE FONTS 21 CHROME AS STANDARD OTHER FINISHES MULTIPLE TAP POINTS COOL TO TAP LED BRANDING CONDENSATION OR ICE EFFECT 443mm (h) through-the-bar 400mm (h) through-the-bar 470mm (h) clamped-to-bar Azur Flag Stainless steel font with chrome finish. Through-the-bar only. 3-6 out, plastic pipe 3/16" or 5/16". Water recirculation (3/8") to tap point (19mm external loom). Cool to Tap. Havana Stainless steel font with chrome finish. 3-6 out, plastic pipe 3/16". LED illumination. Water recirculation (3/8") to base of plinth (19mm external loom). Cool to Tap. Suitable for ice effect or condensation. 444mm (h) through-the-bar 385mm (h) through-the-bar 455mm (h) clamped-to-bar Azur T Stainless steel font with chrome finish. Through-the-bar only. 2-6 out, plastic pipe 3/16" or 5/16". Water recirculation (3/8") to tap point (19mm external loom). Cool to Tap. Juliette 3-7 out, plastic pipe 3/16" or 5/16". LED illumination. Water recirculation (3/8") to neck of font (19mm external loom). All taps, handles and branding accessories shown are sold separately.

12 ADS2 BRANDS DISPENSE FONTS 23 CHROME OR COPPER FINISH OTHER FINISHES COOL TO TAP MULTIPLE TAP POINTS LED BRANDING CONTINENTAL STYLING 451mm (h) through-the-bar 451mm (h) through-the-bar Brauhaus Flag Stainless Steel font with chrome finish. Through-the-bar only. 3-5 out, plastic pipe 3/16", 5/16" or 3/8". LED illumination. Water recirculation (3/8") to tap boss (19mm external loom). Cool to Tap. Brauhaus Y Stainless steel font with chrome or copper finish. Through-the-bar only. 6-8 out, plastic beer pipe 3/16", 5/16" or 3/8". LED illumination. Water recirculation (3/8") to tap boss (19mm external loom). Cool to Tap. 451mm (h) through-the-bar 350mm (h) through-the-bar Brauhaus Bridge Stainless Steel font with chrome or copper finish. Through-the-bar only. 3-6 out, plastic pipe 3/16", 5/16" or 3/8". LED illumination. Water recirculation (3/8") to tap boss (19mm external loom). Cool to Tap. Zenith Stainless Steel font with chrome or copper finish. Through-the-bar only. 3-5 out, plastic pipe 3/16", 5/16" or 3/8". LED illumination. Water recirculation (3/8") to tap boss (19mm external loom). Cool to Tap. All taps, handles and branding accessories shown are sold separately.

13 ADS2 BRANDS DISPENSE FONTS ANGRAM DISPENSE FONTS 25 EXCLUSIVE ADS2 BRANDS DESIGN MODERN QUALITY MATERIALS FLEXIBLE BRANDING ILLUMINATION CUSTOMISABLE 220mm (h) / 320mm (h) / 420mm (h) 260mm (h) / 360mm (h) / 460mm (h) TTB Tubular CTB Tubular Tubular 2 Branding Pods Colour Options Stainless steel font. Through-the-bar only. Small, medium & large. 1 out, plastic pipe 3/16", 5/16" or 3/8". Water recirculation to tap boss (19mm insulation). 1/2" & 5/8" tap boss thread available. Stainless steel font. Clamped-to-bar only. Small, medium & large. 1 out, plastic pipe 3/16", 5/16" or 3/8". Water recirculation to tap boss (19mm insulation). 1/2" & 5/8" tap boss thread available. Stainless steel font. 2 out, plastic pipe 3/16", 5/16" or 3/8". Water recirculation to tap boss (19mm insulation). 1/2" & 5/8" tap boss thread available. Front- and side-facing branding pods. Stainless steel. LED illumination. Requires 001 lens sold separately, (see page 70). A range of colour finishes are available. Please ask for details. All taps, handles and branding accessories shown are sold separately.

14 ADS2 BRANDS DISPENSE FONTS ANGRAM DISPENSE FONTS 27 FLEXIBLE BRANDING COLOUR & FINISH OPTIONS QUALITY MATERIALS ILLUMINATED BRANDING CUSTOMISABLE 370mm (h) through-the-bar 440mm (h) clamped-to-bar 520mm (h) through-the-bar and clamped-to-bar 420mm (h) through-the-bar and clamped-to-bar 260mm (h) through-the-bar 300mm (h) clamped-to-bar 320mm (h) through-the-bar and clamped-to-bar bespoke design service Slimline Stainless steel font with chrome finish. 1 out, plastic pipe 3/16. CrestLine tap only. Water recirculation (3/8 ) to plinth base (19mm external loom). Optima Stainless steel font with chrome finish. 1 out, plastic pipe 3/16, 5/16 or 3/8. LED illumination. Water recirculation (3/8 ) to tap boss (19mm external loom). Alessi 1 out, plastic pipe 3/16 or 5/16 LED illumination. Water recirculation (3/8 ) to base of plinth (19mm external loom). Alessi Mini 1 out, plastic pipe 3/16 or 5/16 LED illumination. Water recirculation (3/8 ) to base of plinth (19mm external loom). Trophy Diecast alloy with chrome finish. 1 out, plastic pipe 3/16, 5/16 or 3/8. LED illumination. Other spray finishes available. We design and print domed, fisheye and flat lenses in-house, so you can brand fonts quickly and cost effectively. Contact us for details. All taps, handles and branding accessories shown are sold separately.

15 ANGRAM DISPENSE FONTS ANGRAM DISPENSE FONTS 29 CHROME, BRASS & OTHER FINISHES LED BRANDING COOL TO TAP CHOICE OF FIXINGS NO MOQ AVAILABLE IN 15 DAYS 380mm (h) through-the-bar 420mm (h) clamped-to-bar 380mm (h) through-the-bar 420mm (h) clamped-to-bar 380mm (h) through-the-bar 420mm (h) clamped-to-bar 200mm (h) through-the-bar and clamped-to-bar 380mm (h) through-the-bar 420mm (h) clamped-to-bar 420mm (h) through-the-bar 420mm (h) clamped-to-bar Classic 1 Classic 2 Classic 3 Classic 3 Short Classic 4 Thornton Brass font available with chrome, brass or colour finish. 1 out, plastic pipe 3/16" or 5/16". With or without LED iillumination. Optional 3/8" cooling loop with 9mm insulated product line standard 3/16". Brass font available with chrome, brass or colour finish. 2 out, plastic pipe 3/16" or 5/16". Non illuminated as standard. Please call if LED iillumination is required. Optional 3/8" cooling loop with 9mm insulated product line standard 3/16". Brass font available with chrome, brass or colour finish. 3 out, plastic pipe 3/16" or 5/16". Non illuminated as standard. Please call if LED iillumination is required. Optional 3/8" cooling loop with 9mm insulated product line standard 3/16". Brass font available with chrome, brass or colour finish. 3 out, plastic pipe 3/16" or 5/16". With or without LED iillumination. Optional 3/8" cooling loop with 9mm insulated product line standard 3/16". Brass font available with chrome, brass or colour finish. 3 out, plastic pipe 3/16" or 5/16". Non illuminated as standard. Please call if LED iillumination is required. Optional 3/8" cooling loop with 9mm insulated product line standard 3/16". Available with chrome or colour finish. 3 standard heights. With or without LED iillumination. Optional 3/8" cooling loop with 9mm insulated product line standard 3/16". +44 (0) sales@angramltd.com All taps, handles and branding accessories shown are sold separately.

16 ANGRAM DISPENSE FONTS ANGRAM DISPENSE FONTS 31 NO MOQ AVAILABLE IN 15 DAYS 62mm (h) clamped-to-bar Low Liner Finished in chrome or brass. Clamped fixings only. 2-7 out, plastic pipe 3/16" or 5/16". Standard beer line or optional re-circulation to the tap. With or without LED iillumination. Trace cooled to customer specification. Freeflow or metered dispense. Plinth available in Mahogany, Oak, unstained and Black Ash. Width 2 out (240mm), 3 out (355mm), 4 out (470mm), 5 out (585mm), 6 out (700mm), 7 out (815mm). bespoke design service 380mm (h) through-the-bar 420mm (h) clamped-to-bar 333mm (h) clamped-to-bar 113mm (h) clamped-to-bar We design and produce bespoke handles and displays for beer engines and fonts that help brands stand out on the bar. Contact us for details. Panther 1 Brass font available with chrome, brass or colour finish. 1 out, plastic pipe 3/16" or 5/16". With or without LED iillumination. Optional 3/8" cooling loop with 9mm insulated product line standard 3/16". Roundhill Brass font available with chrome, brass or colour finish. Clamped fixings only. 1 out, plastic pipe 3/16" or 5/16". With or without LED iillumination. Optional 3/8" cooling loop with 9mm insulated product line standard 3/16". Easy to customise. Mid Liner Finished in chrome or brass. Clamped fixings only. 2-6 out, plastic pipe 3/16" or 5/16". Developed to take a standard beer line. With or without LED iillumination. Trace cooled to customer specification. Freeflow or metered dispense. Plinth available in Mahogany, Oak, unstained and Black Ash. Width 2 out (240mm), 3 out (355mm), 4 out (470mm), 5 out (585mm), 6 out (700mm). +44 (0) sales@angramltd.com All taps, handles and branding accessories shown are sold separately.

17 ANGRAM DISPENSE FONTS ANGRAM BEER ENGINES mm (h) through-the-bar and clamped-to-bar T Bar Chrome, brass or colour finish. 2-6 out, plastic pipe 3/16" or 5/16". Optional 3/8" cooling loop with 9mm insulated product line standard 3/16". With or without LED iillumination. Trace cooled to customer specification. Freeflow or metered dispense. Plinth available in Mahogany, Oak, unstained and Black Ash. Width 2 out (240mm), 3 out (355mm), 4 out (470mm), 5 out (585mm), 6 out (700mm). 293mm (h) clamped-to-bar Classic T Bar Chrome, brass or colour finish. Clamped fixings only. 2-6 out, plastic pipe 3/16" or 5/16". Optional 3/8" cooling loop with 9mm insulated product line standard 3/16". With or without LED iillumination. Trace cooled to customer specification. Freeflow or metered dispense. Plinth available in Mahogany, Oak, unstained and Black Ash. Width 2 out (240mm), 3 out (355mm), 4 out (470mm), 5 out (585mm), 6 out (700mm). Model CQ Chrome, brass or colour finish. Clamped fixing. Plinth available in Oak, Unstained, Mahogany or Black Ash. Single or multi-pull plinth. Cylinder options: ¼ pint non water cooled ¼ pint water cooled Cylinderless Chrome, brass or colour finish. Clamped fixing. Plinth available in Oak, Unstained, Mahogany or Black Ash. Single or multi-pull plinth. No cylinder: Vari-flow valve to create ¼ or ½ pint pull The new Cylinderless Beer Engine from Angram uses a damper and vari-flow valve to replicate the traditional hand pull. Easy to use and install, it works with a standard beer line and gas pump, with no check valve required. +44 (0) sales@angramltd.com All taps, handles and branding accessories shown are sold separately.

18 ANGRAM BEER ENGINES DISPENSE FONTS 35 CHROME, BRASS & OTHER FINISHES QUALITY DESIGN & MATERIALS COMPACT DESIGN SINGLE OR MULTI PULL Clamp On Chrome or brass finish. Clamp On fitting. Plinth available in Oak, Unstained, Mahogany or Black Ash. Single or multi-pull plinth. Cylinder options: ¼ pint standard, ½ pint standard and ½ pint water jacketed Counter Mount Chrome or brass finish. Black front plate. Cut out fitting. No plinth. Cylinder options: ¼ pint standard, ¼ pint water cooled, ½ pint standard and ½ pint water cooled Energy Chrome finish. Standard pour from the back of the beer engine or raised pour option. Clamp On fitting. Chrome plinth. Single pull. Cylinder options: ¼ pint standard, ¼ pint water cooled Compact Angram Compact beer engines occupy minimal space within the bar structure. It is not necessary to cut out shelves if the top shelf is more than 270mm below the bar top. The cut out size enables direct replacement of old units. Chrome or brass finish. Cut out fitting. Plinth available in Oak, Unstained, Mahogany, Black Ash. Single or Multi-pull plinth. Cylinder options: ¼ pint standard or water cooled ½ pint standard or water cooled Single 254mm (w) x 244mm (d). Twin 406mm (w) x 244mm (d). RECONDITIONED Angram Model CQ and Clamp On beer engines are reconditioned to the highest standards and carry the full Angram warranty and the peace of mind which this brings. Contact us for details. +44 (0) sales@angramltd.com

19 ANGRAM BEER ENGINE HANDLES & NOZZLES 37 (A) (B) Mahogany Oak Off-white Extended ½ pint Extended Compact Standard Compact Wooden mahogany stain handle. 210mm (h). Long wooden oak stain handle (A). 260mm (h). Short wooden oak stain handle (B). 210mm (h). Off-white porcelain handle. 215mm (h). Extended ½ pint CO nozzle. Northern Pour. Supplied with locking nut. Extended compact cabinet nozzle. Northern Pour. Supplied with locking nut. Standard compact cabinet nozzle. Southern Pour. Supplied with locking nut. White Black Extended ¼ pint Extended Counter Standard Counter Standard ¼ pint White porcelain handle. 215mm (h). Black porcelain handle. 215mm (h). Extended ¼ pint CQ nozzle. Northern Pour. Supplied with locking nut. Extended counter mounting nozzle. Northern Pour. Supplied with locking nut. Standard counter mounting nozzle. Southern Pour. Supplied with locking nut. Standard ¼ pint nozzle. Southern Pour. Suitable for CQ and CO hand pumps. Supplied with locking nut. +44 (0)

20 ANGRAM BEER ENGINE SPARES & ACCESSORIES 39 (A) (B) CO Cylinder CQ Cylinder CM & CC Cylinder Piston Seal 6" Drip Tray 6" Frame The original Angram cylinder. Three sizes available: ¼ pint non water cooled ½ pint non water cooled ½ pint water cooled for ½ pint unit Two sizes available: ¼ pint non water cooled ¼ pint water cooled Optional water cooled assembly. Keeps beer within the cylinder cool. 3/8" push-fit connectors. Water cooled cylinder easy to retro-fit to units with the standard cylinder. Fits Angram cabinet units and counter mounting / through-counter unit. Two sizes available: ¼ pint standard and ¼ pint water cooled ½ pint standard and ½ pint water cooled Water jacketed cylinder is easily retro fitted with the standard cylinder. Stops air intake into the cylinder. Graphite seal ensures a smooth pull Precision machined. Fits top or bottom of the cylinder. Also known as Bottom Gland Seal. 6" black plastic drip tray. 150mm x 172mm x 50mm. Small 6" drip tray holder (A) for CC and CM hand pumps. Small 6" drip tray holder (B) for CQ and CO hand pumps. Sparklers Cask Taps Cylinder Hose Piston & Glass CC & CM Frame CQ & CO Frame Designed for unpressurised cask ales. Long lasting creamy head. Fine texture without overspill. Non adjustable with 16 holes. Spacing pip to control aeration. For extended swan neck nozzle. 55mm & 90mm nozzle extension. Full range of cask taps. Hard and soft pegs and filters. Nuts / tails and hop filters not required. Two types available. Sold in 1m lengths. Available in ¼ and ½ pint sizes. Includes precision engineered piston. Creates a smooth vacuum pull. Large drip tray holder. For CC and CM hand pumps. Large drip tray holder. For CQ and CO hand pumps. +44 (0) sales@angramltd.com

21 ANGRAM DISPENSE FONTS CERAMIC DISPENSE FONTS CUSTOMISED CERAMIC DISPENSE FONTS 41 LOW COST TOOLING HIGH STRENGTH NATURAL MATERIAL ILLUMINATION ENVIRONMENTALLY FRIENDLY CUSTOMISABLE 400mm (h) through-the-bar 470mm (h) clamped-to-bar 440mm (h) through-the-bar 480mm (h) clamped-to-bar 440mm (h) through-the-bar 480mm (h) clamped-to-bar 370mm (h) through-the-bar and clamped-to-bar 380mm (h) through-the-bar 420mm (h) clamped-to-bar 380mm (h) through-the-bar 420mm (h) clamped-to-bar Magic ITEK 601 ITEK 602 ITEK 616 ITEK 319 ITEK 320 Vitreous font body. 1 out, plastic pipe 3/16" or 5/16". LED illumination. Simulated iced finish available. Water recirculation (3/8") to base of plinth (19mm external loom). Customisable branding and colours. 1 out, plastic pipe 3/16" or 5/16". LED illumination available. Water recirculation (3/8") to base of plinth (19mm external loom). Customisable branding and colours. 1 out, plastic pipe 3/16" or 5/16". LED illumination available. Water recirculation (3/8") to base of plinth (19mm external loom). Customisable branding and colours. 1 or 2 out, plastic pipe 3/16" or 5/16". LED illumination available. Water recirculation (3/8") to base of plinth (19mm external loom). Customisable branding and colours. 1 out, plastic pipe 3/16" or 5/16". Chrome or gold plated s/steel ring. Oval and round medallions available. Water recirculation (3/8") to base of plinth (19mm external loom). Customisable branding and colours. 2 out, plastic pipe 3/16" or 5/16". Chrome or gold plated s/steel ring. Oval and round medallions available. Water recirculation (3/8") to base of plinth (19mm external loom). All taps, handles and branding accessories shown are sold separately.

22 ANGRAM DISPENSE FONTS CUSTOMISED CERAMIC DISPENSE FONTS 43 LOW COST TOOLING HIGH STRENGTH NATURAL MATERIAL ILLUMINATION ENVIRONMENTALLY FRIENDLY CUSTOMISABLE 370mm (h) through-the-bar and clamped-to-bar 275mm (h) through-the-bar 345mm (h) clamped-to-bar 370mm (h) through-the-bar 440mm (h) clamped-to-bar 355mm (h) through-the-bar 425mm (h) clamped-to-bar 370mm (h) through-the-bar 440mm (h) clamped-to-bar 440mm (h) through-the-bar 510mm (h) clamped-to-bar Braumaster Giada 100 Barocco 130 Barocco 150 Pera 150 Pera B 170 Customisable branding and colours. 1-4 out, plastic pipe 3/16" or 5/16". Upper oval and round branding medallions available. Water recirculation (3/8") to base of plinth (19mm external loom). Customisable branding and colours. Chrome or gold metalwork. Base diameter 100mm. 1 or 2 out, plastic pipe 3/16", 5/16" or 3/8". Water recirculation (3/8") to base of plinth (19mm external loom). Customisable branding and colours. Chrome or gold metalwork. Base diameter 130mm. 1 or 2 out, plastic pipe 3/16", 5/16" or 3/8". Water recirculation (3/8") to base of plinth (19mm external loom). Customisable branding and colours. Chrome or gold metalwork. Base diameter 150mm. 1 or 2 out, plastic pipe 3/16", 5/16" or 3/8". Water recirculation (3/8") to base of plinth (19mm external loom). Customisable branding and colours. Chrome or gold metalwork. Base diameter 150mm. 1 or 2 out, plastic pipe 3/16", 5/16" or 3/8". Water recirculation (3/8") to base of plinth (19mm external loom). Customisable branding and colours. Chrome or gold metalwork. Base diameter 170mm. 1 or 2 out, plastic pipe 3/16", 5/16" or 3/8". Water recirculation (3/8") to base of plinth (19mm external loom). All taps, handles and branding accessories shown are sold separately.

23 BEER COOLERS 45 Evolution 15/l Evolution 25/l Evolution 35/l Shelf 18 Geo Green 30 Up to 2 beer coils. Compressor HP: 1/5. Cooling power: 401 WATT / 345 Kcal/h. Water tank capacity: 14 (lt). Ice bank: 7 kg / 560 Kcal. Output per minute 24 C): 3. Outlet temperature: 3/5 C. Up to 4 beer coils. Compressor HP: 1/4. Cooling power: 513 WATT / 441 Kcal/h. Water tank capacity: 20 (lt). Ice bank: 10 kg / 800 Kcal. Output per minute 24 C): 4. Outlet temperature: 3/5 C. Up to 4 beer coils. Compressor HP: 1/3. Cooling power: 571 WATT / 491 Kcal/h. Water tank capacity: 29 (lt). Ice bank: 14 kg / 1120 Kcal. Output per minute 24 C): 5. Outlet temperature: 3/5 C. Up to 2 beer coils. Compressor HP: 1/4. Cooling power: 513 WATT / 441 Kcal/h. Water tank capacity: 17 (lt). Ice bank: 8 kg / 640 Kcal. Output per minute 24 C): 4. Outlet temperature: 4/8 C. Up to 3 beer coils. Compressor HP: 1/3. Cooling power: 625 WATT / 537 Kcal/h. Water tank capacity: 32 (lt). Ice bank: 15 kg / 1200 Kcal. Output per minute 24 C): 5. Outlet temperature: 3/5 C. Evolution 50/l Up to 5 beer coils. Compressor HP: 1/2. Cooling power: 905 WATT / 779 Kcal/h. Water tank capacity: 44 (lt). Ice bank: 21 kg / 1680 Kcal. Output per minute 24 C): 6. Outlet temperature: 3/5 C. Evolution 65/l Shelf 11 Up to 6 beer coils. Up to 2 beer coils. Compressor HP: 3/4. Compressor HP: 1/5. Cooling power: 1282 WATT / 1102 Cooling power: 232 WATT / 200 Kcal/h. Kcal/h. Water tank capacity: 10 (lt). Water tank capacity: 52 (lt). Ice bank: 5 kg / 400 Kcal. Ice bank: 25 kg / 2000 Kcal. Output per minute 24 C): 4. Output per minute 24 C): 8. Outlet temperature: 4/8 C. Outlet temperature: 3/5 C. Geo Green 50 Geo Green 75 Up to 5 beer coils. Up to 7 beer coils. Compressor HP: 1/2. Compressor HP: 2/3. Cooling power: 849 WATT / 730 Kcal/h. Cooling power: 1392 WATT / 1197 Kcal/h. Water tank capacity: 48 (lt). Water tank capacity: 77 (lt). Ice bank: 22 kg / 1760 Kcal. Ice bank: 34 kg / 2720 Kcal. Output per minute 24 C): 7. Output per minute 24 C): 12. Outlet temperature: 3/5 C. Outlet temperature: 3/5 C. ZeroTech delivers either extra cold beer or ice covered fonts without the need for a secondary glycol cooler. The all-inone system sits between the font and the primary cooler and dispenses extra cold at close to 0 C, without freezing. It's easy to use, eco-friendly and accurate. Contact us for further details.

24 SOFT DRINKS & JUICE DISPENSE 47 Brave 90 Brave 120 Joy 20 Joy 65 Polar Adria Brave Range Joy Range 3,4,6 or valves. Eco-friendly vitreous body. Broad eye-catching display. Branding on all 4 sides. Premix or postmix. 4, 6 or 8 valves. Large illuminated branding area. Chrome finish. Energy-saving design & performance. Up to 16 coils. Tank Capacity: 56, 92 or 123 litres. Ice Bank: 20, 39 or 50 kg. Compressor: 5/8, 1 or 1+1 hp. Cooling: 1274, 2213 or WATT. Carbonation Pump: 400 litres per hour. Carbonator Total Volume: 1650, 2000, 3500cc. 430 stainless steel casing. Refrigerant R290 (propane) or R134a. For soft drinks & fruit juice. Tank Capacity: 19, 30, 50 or 67 litres. Valves: 3-4, 4, 5-6 or 8. Ice Bank: 6, 9, 12 or 20 kg. Compressor: 1/5, 1/3, 1/2 or 3/4 hp. Cooling: 401, 702, 905 or 1386 WATT. Carbonation Pump: 300, 400, 400 or 400 litres per hour. Carbonator Total Volume: 1600, 1800, 1800 or 2000 cc. Stainless Steel AISI 304 coils. Refrigerant: R290 (propane) or R134a. Polo 30 Polo 50 Flexa Sector Eclipse Range Polo Range Premix or postmix. 1, 2 or 3 lines. Available with through-the-bar or clamped-to-bar fixings. Chrome finish. Premix or postmix. 3, 4, 5 or 8 lines. Matt chrome-plated aluminium. Round bifacial led light badge holder. Energy-saving solutions. Horizontal or vertical version. Up to 8 coils. Tank Capacity: 40 litres. Ice Bank: 13 kg. Compressor: 1/2 hp. Cooling: 1000 WATT. Carbonation Pump: 400 litres per hour. Carbonator Total Volume: 2000 cc. Refrigerant R290 (propane) or R134a. For soft drinks & fruit juice. Front panel with illuminated branding. Up to 6 coils. Tank Capacity: 25 or 45 litres. Ice Bank: 12 or 22 kg. Compressor: 1/3 or 1/2 hp. Cooling: 571 or 905 WATT. Carbonation Pump: 400 litres per hour. Carbonator Total Volume: 1710 or 2000 cc. Refrigerant R290 (propane) or R134a.

25 COSMETAL WATER DISPENSERS 49 ANGRAM DISPENSE FONTS COUNTER TOP & FREE STANDING STYLISH COMPACT DESIGNS AMBIENT, COLD, SPARKLING & EXTRA HOT Our Cosmetal division offers water dispensers for commercial, HoReCa and domestic use. Compact, efficient and kind to the environment, they eliminate the problems of managing bottled drinking water. Drinktower Three-way tap dispensing cold, room-temperature and sparkling water. Automatic dispensing with dose setting (small and large). Designed to equip the built-in models of the JCLASS and NIAGARA product families with a functional and aesthetically appealing tap. Pro Stream Pro-stream is a built-in water boiler with dedicated soft-touch tap. It dispenses extra hot water at 98 C and can be customised by adding the cold and/or sparkling water coolers. Niagara Top Robust and reliable professional units. This product is easy to place on bar and restaurant counters, in cafés or on worktops. Compact design leaves worktops clear. Includes safety valve to prevent accidental leakages inside the unit. Niagara In Space-saving design for use beneath bar counters or in remote corners. Wide range of taps and drip trays custom configuration. Recirculation with python (optional) ensures that the water dispensed is always chilled and/or sparkling, even when the cooler is installed remotely. Niagara Floor standing model with internal space for accessories (filters, Co2). Protected internal spouts dispense continuously or intermittently. Drip tray connected to waste facilitates optimal jug positioning. Includes safety valve to prevent accidental leakages inside the unit.

26 COSMETAL WATER DISPENSERS 51 ANGRAM DISPENSE FONTS QUALITY DISPENSE COUNTER TOP & FREE STANDING MODELS SPACE SAVING DESIGNS AMBIENT, HOT, COLD & SPARKLING Hi-Class J-Class J-Class In H2OMY Aquality River Offers water at room temperature, cold, sparkling and hot. Black tempered glass front with touch screen control panel. Dispensing zone with adjustable height for use with cups or bottles. Hot water dispense activated by double touch safety device. For counter-top installations. Integrated and protected spout prevents retro contamination. Drip tray with a capacity of 20 cl, can be drained. Includes safety valve to prevent accidental leakages inside the unit. Designed for installation under the sink, when space is limited or worktops must be kept free. A wide range of professional taps and driptrays are available to complete the cooler. Eliminates the need to purchase and store water bottles at home. Available as an under-counter and counter top model. Dispenses up to 15 litres per hour of cold water (3-10 C), still or sparkling, and 8 litres per hour of hot water. Simple to run and maintain, Aquality POU is an efficient and solid point of use water cooler for offices. Ice bank cooling system, available in two models with two different capacities, 20 l/h and 28 l/h. Available with room temperature, chilled, sparkling and hot water. For public spaces such as waiting rooms, schools and shopping centres. Easily connects to the water main, providing a constant supply of fresh water. Floor-standing or wall-mounted, with various capacities per hour: 20, 30 and 55 l/h for the floor-standing, 30 and 55 l/h for wall-mounted.

27 WATER DISPENSE 53 quality fonts and dispense systems for water We offer a range of fonts and dispense systems for water that deliver savings and sustainability to bars, restaurants and company canteens. Please contact us for details. Gemma Brass font with chrome finish. 3 out, plastic pipe 3/16. Magic Alma Vitreous font body. 3 out, plastic pipe 3/16. 1 x LED pod. Aqua Tap 12 Power: 230V - 50 Hz. Compressor: 1/5 HP. Tank Capacity: 12 litres. Carbonation Pump: 200 l/h. Carbonator: 960 cc. Ice Bank: 5 Kg. bespoke design service TE-Mix Aqua Range TE-Mix Aqua 15 TE-Mix Aqua 25 TE-Mix Aqua 50 TE-Mix Aqua 65 Power: 230V - 50 Hz (all models). Compressor: 1/5, 1/4, 1/2 & 5/8 HP. Output: 70, 100, 210 & 250 litres. Tank Capacity: 14, 20, 44 & 52 litres. Carbonator: 960, 960, 2000 & 2000 cc. Carbonation Pump: 200, 200, 300 & 300 litres per hour. Recirculation Pump: 3.6, 3.6, 6.5 & 6.5 m. Sodawater Output: 2.5, 3, 3, 3 l/m. Cooling Capacity: 232W 200 kcal/h, 300W 600 kcal/h, 585W 500 kcal/h & 682W 585 kcal/h. We design and produce gel badges that are hard wearing, eye-catching and ideal for a variety of point of sale applications. Almost any shape or size can be produced without the need for expensive tooling, providing a flexible and cost effective PoS branding solution.

28 AQUATEC DIAPHRAGM PUMPS DRIP TRAYS & GLASS FRESHENERS 55 4" (A) 6" (B) We are Europe's exclusive supplier of Aquatec diaphragm pumps, which are designed for water pressure boosting, carbonation, and the dispense of bag-in-box juice and wine. 12VDC & 24VDC / 24VAC, 115VAC & 230VAC 12VDC & 24VDC / 24VAC, 115VAC & 230VAC 550 Series 5800 Demand Flow up to 20 L/M. Flow up to 8.5 L/M. Pressure up to 4.8 bar. Pressure up to 10 bar. Available with pressure switch Available with pressure switch and / or integrated bypass. and / or integrated bypass. Available with quick disconnect or 1/2 Many port fittings available. NPT fittings. Made of food grade materials. Made of food grade materials. Tray & Frame Plastic drip tray with black powder coated steel frame (can be ganged). 98mm x 117mm x 45mm (A). 150mm x 172mm x 50mm (B). Part No. Tray - P620A (A) / P621A (B) Part No. Frame - P615 (A) / P626A (B) 460mm Drip Tray ABS plastic. 460mm x 180mm x 30mm. Part No. P623 Drip Tray #1 Counter stainless steel tray and grill. Part No (200 x 180 x 30mm) Part No (300 x 180 x 30mm) Part No (400 x 180 x 30mm) 115vac & 230VAC (other voltages available upon request) 12vdc & 24VDC / 115vac & 230VAC 12vdc & 24VDC / 115vac & 230VAC 5800 Carbonator 550 Aquajet 5800 Aquajet Drip Tray #2 Drip Tray #3 Drip Tray #4 Pressure relief valve (bypass) set to 10 or 15 bar). Available with push fit or 3/8 NPT fittings. Made of food grade materials. Capable of being run dry. Constant pressure across multiple outlets. Pressure sensing motor controller. Capable of being run dry. Suitable for use with keg beer, bag-in-box wine & juice. Constant pressure across multiple outlets. Pressure sensing motor controller. Capable of being run dry. Suitable for use with keg beer, bag-in-box wine & juice. Counter stainless steel tray and grill. Part No (500 x 220 x 30mm) Part No (600 x 220 x 30mm) Part No (800 x 220 x 30mm) Recessed stainless steel tray and grill & include glass freshener and discharge. Part No (200 x 180 x 30mm) Part No (300 x 180 x 30mm) Part No (400 x 180 x 30mm) Counter stainless steel tray and grill. Includes glass freshener and discharge. Part No (300 x 180 x 30mm)

29 BAG-IN-BOX DISPENSE KIT 57 Font, tap & badge 12VDC & 24VDC / 24VAC, 115VAC & 230VAC Wine Inline Flow Valve BIB Connector Demand Pump Connector Inline flow valve Bag-In-Box Stainless steel Slimline font (page 26). Range of sizes available. 1 out, plastic pipe 3/16". CrestLine free-flow wine tap (page 59). Branding badge & clip % flow control. Fits inline or below bar. Control via Allen key or knob. 5/16" or 3/8" John Guest inlet. 3/16", 5/16" or 3/8" John Guest outlet. Fits to bag-in-box tap. Airtight seal. Economical. Reliable. Easy to connect. Easy to clean & maintain. Flow up to 8.5 L/M. Pressure up to 10 bar. Available with pressure switch or integrated bypass. Many port fittings available. Food grade materials. Support Tray Python Cooler Pump Designed to help still bagin-box wines and ciders compete with mainstream brands on the bar. Ideal for high-volume outlets, the kit Includes all of the components needed for a draught installation. Cider Stainless steel Tubular font (page 24). Range of sizes available. 1 out, plastic pipe 3/16", 5/16" or 3/8". AceLine free-flow tap (page 58). Badge holder & lens. Support Tray Supports bag-in-box. 6mm clear acrylic. Inclined gravity feed. Holds bag-in-box securely. Helps to eliminate wastage. Python & Pipe Font supplied with 2m python and insulated 3/16" product pipe. Optional Cooler Optional two coil water recirculation shelf cooler. Digital electronic thermostat. Precise temperature control. Cools up to three products.

30 FREE-FLOW TAPS 59 Aceline Kingline Celli Celtic Celli Globus B Crestline Tap body made from 316 stainless steel (classed as food grade). Fixed or removable nozzle. Range of diaphragm seals, back fittings and restrictors available. Tap body shape may vary depending on specification selected. Tap body made from 316 stainless steel (classed as food grade). Removable nozzle. Range of diaphragm seals, back fittings and restrictors available. Brass tap body with chrome or gold finish. Plastic nozzle. Available with sparkler. Brass tap body with chrome plated finish. Plastic food grade liner. Stainless steel nozzle. Tap body made from 316 stainless steel (classed as food grade). For wine and water dispense. Low pressure use only. Removable nozzle. Range of back fittings available. quality taps for a quality pour We offer a range of metal and plastic free-flow taps with 1/2" BSP fitting as standard. Some taps are available with 5/8" BSP fitting too. Please contact us for details. Starline Tap body made from 316 stainless steel (classed as food grade). Rotary action. Plastic side-facing branding disc suitable for print and/or colours. Removable nozzle. Range of back fittings available. Celli FC/4 Brass tap body with gold or chrome finish. Stainless steel or plastic nozzle. Available with sparkler. Firstline Tap body made from food grade POM copolymer. Fixed or removable nozzle. Range of diaphragm seals, back fittings and restrictors available. Headline Tap body made from 316 stainless steel (classed as food grade). Head forming technology minimises gas breakout for perfect presentation. Pull to pour, push to cream action. Available in one or three head restrictor. Range of back fittings available. Headline Tap body made from food grade POM copolymer. Head forming technology minimises gas breakout for perfect presentation. Pull to pour, push to cream action. Available in one or three head restrictor. Range of back fittings available.

31 VARI-FLOW TAPS 61 Foreline Starline Celli Globus B Foreline Tap body made from 316 stainless steel (classed as food grade). Fixed or removable nozzle. Range of diaphragm seals, back fittings and restrictors available. Tap body made from 316 stainless steel (classed as food grade). Rotary action. Plastic side-facing branding disc suitable for print and/or colours. Removable nozzle. Range of back fittings available. Brass tap body with chrome plated finish Plastic food grade liner. Stainless steel nozzle. Tap body made from food grade POM copolymer. Fixed or removable nozzle. Range of diaphragm seals, back fittings and restrictors available. quality taps for a quality pour bespoke design service We offer a range of metal and plastic vari-flow taps with 1/2" BSP fitting as standard. Some taps are available with 5/8" BSP fitting too. Please contact us for details. Celli FC/4 Tap body made from 316 stainless steel (classed as food grade). Tap body also available in brass, chrome or gold plated finish. Fixed or removable plastic nozzle. Celli Celtic Brass tap body with chrome or gold plated finish. Plastic nozzle. Topline Tap body made from food grade POM copolymer. Fixed or removable nozzle. Range of diaphragm seals, back fittings and restrictors available. Highline Tap body made from food grade POM copolymer. Removable nozzle. Range of diaphragm seals, back fittings and restrictors available. At the forefront of tap innovation for over 50 years, we specialise in bespoke tap design. Contact us for more details.

32 TAP & DISPENSE ACCESSORIES 63 Nozzle #1 Nozzle #2 Nozzle #3 Creamer Seal Full Pour Seal Thread Adaptor Stainless steel. For use with AceLine, ForeLine and SideLine taps only. POM copolymer. For use with AceLine, ForeLine and SideLine taps only. Available in a range of colours. POM copolymer. For use with FirstLine, ForeLine, TopLine and HighLine taps only. Available in a range of colours. EPDM rubber. For use with AceLine, KingLine, FirstLine, SideLine, ForeLine, TopLine, and HighLine taps only. EPDM rubber. For use with AceLine, KingLine, FirstLine, SideLine, ForeLine, TopLine, and HighLine taps only. 3/8" UNC thread as standard. M10 thread available. Available in a range of finishes. Part No Part No Part No Part No Part No Part No (adaptor) Nozzle #4 Restrictors Cider Seal Check & Back Nuts Inline Flow Valve AC-DC Adaptor POM copolymer. Threaded nozzle for sparkler. Available in a range of colours. We offer a range of restrictors in stainless steel for use with Nozzle #1 and #2, plastic (POM copolymer) for Nozzle #3. Please contact us for details. Nitrile rubber. For use with AceLine, KingLine, FirstLine, SideLine, ForeLine, TopLine, and HighLine taps only. Plated brass. Available in a range of finishes. 1/2" BSP as standard, with 5/8" BSP available to special order % flow control. Fits inline or below bar. Control via Allen key or knob. 5/16" or 3/8" John Guest inlet. 3/16", 5/16" or 3/8" John Guest outlet. Mounting bracket available (see above). Input 230V - 50HZ. Output 24V A. GB and Euro two-pin plug versions available. Part No Part No Part No. ZZ

33 TAP HANDLES 65 We offer a wide range of metal, plastic and ceramic handles to suit most standard beer taps, which can be supplied plain or branded. Contact us to discuss your needs in detail. Please note that handle selection will dictate the tap inner mechanism fitted. Bar 29 Bar 30 Aluminium. Aluminium. Polished. Polished and clear lacquered. 155mm (H). 100mm (H). Available in a range of finishes. Available in a range of finishes. Bar 34 Bar 35 Aluminium. Aluminium. Polished. Polished. 120mm (H). 170mm (H). Available in a range of finishes. Available in a range of finishes. Bar 36 A & B Aluminium. Polished. A: 150mm (H) / 28mm (Ø). B: 135mm (H) / 20mm (Ø). Available in a range of finishes. Bar 31 Bar 32 Bar 33 Bar 37 Bar 38 Bar 39 Aluminium. Polished. 75mm (H). Available in a range of finishes. Aluminium. Polished. 130mm (H). Available in a range of finishes. Aluminium. Polished. 85mm (H). Available in a range of finishes. POM copolymer. 60mm (H). Available in a range of colours. POM copolymer. 100mm (H). Available in a range of colours. Acrylic. 145mm (H). Available in a range of colours.

34 TAP HANDLES 67 Bar 40 Bar 41 Bar 42 Bar 46 Bar 51 Bar 52 ABS. 160mm (H). Available in a range of colours. Ceramic. 295mm (H). Available in a range of colours. Ceramic. 300mm (H). Available in a range of colours. Ceramic. 165mm (H). Available in a range of colours. ABS plastic. 75mm (H). Available in a range of colours. Requires 002 flat lens (see page 70), available printed, clear or opaque. ABS plastic. 85mm (H). Available in a range of colours. Requires 003 flat lens (see page 70), available printed or clear. Bar 43 Bar 44 Bar 45 Bar 53 Bar 54 Holders Ceramic. 70mm (H). Available in a range of colours. Ceramic. 140mm (H). Available in a range of colours. Ceramic. 185mm (H). Available in a range of colours. ABS plastic. 120mm (H). Available in a range of colours. Requires 007 flat or domed lens (see page 70), available printed or clear. ABS plastic. Quick-change branding solution. Round and/or oval lens holders. For AceLine, FirstLine, PrimoLine, ForeLine, TopLine and HighLine taps. Available in a range of colours. ABS plastic. Round or oval (portrait or landscape). Plated holder available. Available in a range of colours. Requires 001 (round) or 007 (oval) lens (see page 70).

35 HANDLE & TAP CUSTOMISATION 69 Painted Plated Polished Vinyl Wrapped Colour Matched Finish suitable for all handles. Available in a range of finishes and colours. Finish suitable for metal and plastic handles only. Chrome and gold finishes available. Finish suitable for metal handles only. Finish suitable for all handles. A wide range of vinyl wrapping options are available. Please ask for details. Finish suitable for plastic taps and handles only. A wide range of colour options are available. Please ask for details. Gold Silver Bronze Black bespoke design service Printed Finish suitable for all handles. A wide range of print options are available. Please ask for details. Laser Etched Finish suitable for metal handles only. Gel Badge Gel badges are suitable for handles with flat surfaces only. The size and shape of the badge will depend on which handle is selected. PVD & Electro Phoretic PVD (physical vapour deposition) and electro phoretic finishes suitable for metal taps (excluding nozzle) and tap handles, and some plastic components. A wide range of finish options are available. Please ask for details. We create bespoke tap markers that are quick and easy to install. Ideal for a promotion or product launch, we can meet any budget or marketing need.

36 BRANDED LENSES Flat 82mm 001 Fisheye 82mm 002 Flat 82mm 78mm x 104mm 104mm x 78mm Acrylic. 82mm (Ø) x 3mm. Reverse printed gasket available. Acrylic. 82mm (Ø) x 20mm. Reverse printed gasket available. Acrylic. 47mm x 40mm x 2mm. Reverse print. Fits Bar 51 handle only (see page 67). Acrylic. 82mm (Ø) x 1.5mm. Reverse print. Designed to fit round Celli badge holders (see pages 72-73). Acrylic. 78mm x 104mm x 1.5mm. Reverse print. Designed to fit oval Celli badge holders (see pages 72-73). Acrylic. 104mm x 78mm x 1.5mm. Reverse print. Designed to fit oval Celli badge holders (see pages 72-73). 003 Flat 007 Flat 007 Fisheye Bespoke Lenses Acrylic. 69mm x 40mm x 2mm. Reverse print. Fits Bar 52 handle only (see page 67). Acrylic. 85mm x 63mm x 3mm. Reverse printed gasket available. Acrylic. 85mm x 63mm x 20mm. Reverse printed gasket available. Client: AB InBev Brand: Stella Artois We created a bespoke branding lens for T-bars made using a two-stage injection moulding that delivers a distinctive illuminated halo effect. Client: Miller Brands (UK) Brand: Peroni Nastro Azzuro Capturing Peroni s authentic Italian spirit and premium positioning, we created a custom lens and badge system that fits standard T-Bars. Client: Maxxium UK Brand: Ginger Grouse To help attract new consumers to the brand, we created a custom lemon shaped lens for the Ginger Grouse ceramic font.

37 CELLI BADGE HOLDERS 73 Our easy to install Celli badge holders and pods provide a simple and cost effective way of increasing brand visibility on fonts and T-bars. Most are available in chrome or gold as standard, with other finishes available. Small Oval L Metal diecast with chrome or gold finish. 145mm (h). Fits Celli taps only. Requires oval 104mm x 78mm Celli lens sold separately (see page 71). Short Oval L Metal diecast with chrome or gold finish. 111mm (h). Fits Celli taps only. Requires oval 104mm x 78mm Celli lens sold separately (see page 71). Side Round Metal diecast with chrome or gold finish. 145mm (h). Fits Celli taps only. Requires round 82mm Celli lens sold separately (see page 71). Tall Round Metal diecast with chrome or gold finish. 188mm (h). Fits Celli taps only. Requires round 82mm Celli lens sold separately (see page 71). Short Round Metal diecast with chrome or gold finish. 120mm (h). Fits Celli taps only. Requires round 82mm Celli lens sold separately (see page 71). Round Clip Oval P Clip Oval L Clip Side Oval P Tall Oval P Short Oval P Metal diecast with chrome or gold finish. 114mm (h). Fits 1/2" & 5/8" BSP taps. Requires round 82mm Celli lens sold separately (see page 71). Metal diecast with chrome or gold finish. 168mm (h). Fits 1/2" & 5/8" BSP taps. Requires oval 78mm x 104mm Celli lens sold separately (see page 71). Metal diecast with chrome or gold finish. 143mm (h). Fits 1/2" & 5/8" BSP taps. Requires oval 104mm x 78mm Celli lens sold separately (see page 71). Metal diecast with chrome or gold finish. 170mm (h). Fits Celli taps only. Requires oval 78mm x 104mm Celli lens sold separately (see page 71). Metal diecast with chrome or gold finish. 206mm (h). Fits Celli taps only. Requires oval 78mm x 104mm Celli lens sold separately (see page 71). Metal diecast with chrome or gold finish. 146mm (h). Fits Celli taps only. Requires oval 78mm x 104mm Celli lens sold separately (see page 71).

38 BADGE HOLDER & ILLUMINATED POD ANGRAM HOME BAR KIT 75 Large Round Small Round Metal diecast with chrome or gold finish. 190mm (H). Fits 1/2 & 5/8 BSP taps. Requires 001 lens sold separately (see page 70). Metal diecast with chrome or gold finish. 145mm (H). Fits 1/2 & 5/8 BSP taps. Requires 001 lens sold separately (see page 70). Serve perfect cask conditioned ale at home A The Angram Home Bar Kit is designed for use indoors or outdoors, and includes everything you need to serve perfect cask conditioned ale at home. B The kit includes Angram's renowned CQ Beer Engine (see page 33 for futher details), a cooler to ensure optimum dispense temperature, and an easy-to-follow installation and cask ale maintainence guide. E Light up your brand with our diecast LED pod. Designed for 001 flat or fisheye ADS2 Brands lenses, the pod fits all standard 1/2" & 5/8" (MOQ applies) BSP taps. Large Oval Metal diecast with chrome or gold finish. 175mm (H). Fits 1/2 & 5/8 BSP taps. Requires 007 lens sold separately (see page 70). Small Oval Metal diecast with chrome or gold finish. 135mm (H). Fits 1/2 & 5/8 BSP taps. Requires 007 lens sold separately (see page 70). The CQ Beer Engine will easily mount on most tables and bars; however, if you require a custom counter for your home bar, please call us. Your kit includes: Angram Guide to Serving and Maintaining Cask Ale. Angram CQ Beer Engine (1/4 pint water-jacketed cylinder) in Brass and Oak. Flash cooler (reconditioned) to cool both cooling probe and beer engine water jacket. Cask Auto-Tilt Stand to ensure perfect stillage. Cask Cooling Probe for cooling the cask directly. Full range of ancillaries including connectors, connection tubes, jubilee clips, cask tap and tail, hop filter, cask tap nut, sparkler and hard and soft spiles. C D A. Handpull B. Clamp & Beer Engine C. Cooler D. Auto-tilt E. Cask Counter included for illustrative purposes only. +44 (0) sales@angramltd.com

39 BRANDED GLASSWARE 77 Be seen more and sell more with quality branded glassware Within today's increasingly competitive on-trade arena, delivering the perfect serve is essential, and here the right glassware has a crucial role to play. We offer a specialist branded glassware service for all brands, venues and drinking occassions that's proven to enhance perception, increase awareness and visibility, add value and boosts sales. QUALITY BRANDING PROCESSES To help brands stand out and sell their distinctiveness, we offer a range of quality branding processes including six colour print, transfers, 3D raised print, acid etch and Headkeeper nucleation. QUALITY TOUGHENING And for a safer experience for consumers and bar staff alike, many of the designs we offer can be supplied branded and fully toughened. To ensure you of best quality and performance, we always toughen from top to bottom, not just around the rim, and never add branding to a glass that has already been toughend. BESPOKE DESIGN & MULTI PRODUCTION We can also create bespoke glassware too. All we need to get started is your brief, or we can work from your artwork if you already have a design in mind. And thanks to our unique multi production service, we can produce bespoke glassware more cost effectively and in lower quantities than ever before. LOGISTICAL SUPPORT And because we understand the challenges of reducing operational costs and improving product lead times from source to shelf, we provide a range of logistical services - from managing stock to sourcing packaging materials - for one seamless, hands-free, operation. We specialise in 6-colour print, transfers, 3D raised print, acid etch, nucleation and more. We also offer bespoke glass design, and whatever your requirement promise a fast and flexible service.

40 OUR EXPERIENCE & CREDENTIALS 79 BESPOKE FONT EXPERTS... Fast, flexible & responsive At ADS2 Brands and Angram, we believe opportunities to grow and develop in today s market realities call for a more adaptive and flexible response. That s why we will continue to invest in innovation, as well as our in-house design, technical, procurement and sales resources, so that we remain best placed to focus on delivering what s right for our customers and clients: quality, real added value and competitive advantage. Part of the Celli Group. Over 50 years bespoke dispense, tap and point of sale experience. Dedicated sales and account management. Full in-house design, technical, print, procurement and project management. Proven global sourcing network. ISO 9001:2015 certified. We are impressed with how this business meets the needs of its clients - the almost hourly capacity changes to what is a highly sophisticated batch manufacturing operation. With this company, anything is possible.

41 About the Celli Group Celli Group is one of the world's leading producers of beverage dispense and branding solutions. Established over 40 years, its products are used in more than 100 countries, where they set the standard for design, technology, quality and respect for the environment. The aim of the Group is to help meet the complex challenges today's brewers, brand owners and licensed retailers face with value-added products that are not only innovative and creative but relevant and effective too. It is committed to investment and development, which can be seen in its network of world-class commercial, technical and manufacturing facilities, while its relentless focus on quality is certified by internationally recognised third parties. As your partner in beverage dispense and branding, the Celli Group has the skills, creativity, experience and resources to deliver the products and solutions you need to succeed - today as well as tomorrow. Visit to find out more. Available through: 003/09/2017 ADS2 Brands Ltd, Unit 3 Acan Business Park, Garrard Way, Telford Way Industrial Estate, Kettering, Northamptonshire NN16 8TD, UK sales@ads2brands.com +44 (0) Angram Ltd, Thirsk Industrial Park, York Road, Thirsk, North Yorkshire YO7 3BX, UK sales@angramltd.com +44 (0)