TDU-R Thermal Desorption Unit Technical overview

Size: px
Start display at page:

Download "TDU-R Thermal Desorption Unit Technical overview"

Transcription

1 Technical overview Project doc.: TDU-R Technical overview QUALITY GROUP BELGOROD RUSSIA, 2017 Name Signature Date Prepared Vitaliy Chaiko 08/03/17 Checked Denis Chaiko 12/03/17 Approved Vladimir Gargoma 10/04/17

2 Table of contents 1. Purpose Introduction Advantages of TDU-R unit Disadvantages of TDU-R unit Performance parameters General description of TDU-R unit Material feed module Process module Dried material discharge module Gas treatment module Condensation and separation module Non-condensable gas treatment module Cooling system module Control room Project team Page 2 of 18

3 1. Purpose Purpose of this document is to describe system of drill cuttings thermal treatment by indirect heat (TDU-R) and control principles. 1.1 Introduction TDU-R Thermal Desorption Unit - model R The unit for drill cuttings treatment is developed by LLC Quality Group Belgorod company in Russia. The task was set to develop simple, effective and ergonomic system of drill cuttings treatment. Final product after treatment includes recovered oil, water and inert solid phase. Design requirement is to minimize installation time and maximum reduce service demand. The project was started in March 2016, the latest drawings were developed in March The unit is developed by highly professional engineers and specialists who have great experience in operation of similar units in different countries around the world (Africa, Asia, America and Europe). System of drill cuttings thermal treatment (TDU-R) represents complete solution on drill cuttings treatment. The system provides treatment up to 2 tons/hour of drill cuttings and further separation into three recovered fractions: oil, water and solid phase. The system is supplied with drill cuttings and recovers oil and water by indirect heating in process module. Recovered oil and water can be reused during drilling process and solid phase (due to low total content of hydrocarbons (less than 1%) can be used by a client for road filling or site area preparation, premixing solid phase with sand on site. Technical process of drill cuttings treatment includes material heating by diesel burners. It allows to minimize power consumption resulting in reduction of economic resources cost. The unit is so designed that oil recovered during treatment can be used for burners operation making the whole treatment process much cheaper. Also it shall be noted that the whole technical process of treatment is totally enclosed. 1.2 Advantages of TDU-R unit Mobile Installation 24 hours Minimum power consumption Easy to operate Two operators are required for operation per shift Minimum price compared to foreign analogue Easy to manufacture Able to treat drill cuttings after drying centrifuge and press filter Page 3 of 18

4 Able to treat viscous drill cuttings from old cuttings pits Heat energy surplus Mobility. The unit is designed based on 20 ft. container in shipping frame allowing quick and easy installation, assembly and transportability by any means of transportation, by sea and land. Installation. Installation will not take much time, about a day (24 hours). Installation speed and time will depend on convenience of selected area where process modules will be assembled into one complex TDU- R. Power. Power consumption will be minimum compared to existing analogues, less than 60 kw / hour. This economy is possible due to diesel burners which are used to heat the unit and maintain operating temperature required for the process. Diesel burners can also operate on oil recovered during treatment of drill cuttings. Operation. TDU-R control program enables to capture and monitor the whole treatment process, control all parameters and operation of all modules and equipment. Operator can easily control operational condition and can timely respond to any emerging problems. It is quite easy to understand and learn how to operate the unit within a short period of time due to program availability and simplicity. The unit is normally operated by two operators per shift; number of operators may depend on quantity of additional equipment to be used during material treatment. Price-Quality. TDU-R unit is budget choice based on price-quality ratio as the company set a task for the engineers to develop the unit simply and qualitatively based on great experience of the specialists who have been working on similar projects in different countries within 17 years. Simplicity of the unit won t affect its capacity and quality will be equal or even better compared to foreign analogue. Treated material. One of the most important advantages of TDU-R unit is possibility to treat easily any material, even after vertical drying centrifuge like Dryer or after cuttings pressing equipment like Mud Cuttings Separator. ТDU-R can also treat easily drill cuttings stored in old pits after preliminary screening of drill cuttings using shale shaker to remove any foreign objects which may get inside the unit. Treatment of material from old abandoned cuttings pits is always challenging and important driver of disposal. Additional capabilities. Surplus of heat energy gained during treatment process can be used: in winter to heat the premises, in summer to get hot water, heat treated material or for other needs. Page 4 of 18

5 1.3 Disadvantages of TDU-R unit СО2 release due to burners usage Process water requires additional treatment If repair is required, the unit is cooled down to safe temperature for a long time after total shutdown of all equipment Not able to treat coarse debris which may often be found in cuttings pits Exhaust gas СО2 released during operation of diesel burners is the main disadvantage of the unit. There is possibility to install additional equipment to minimize СО2 release but it incurs additional expenses. The second option is to use recovery method; it will considerably reduce gas release but will result in cost increase and TDU-R modification. Process water, obtained after drill cuttings treatment, has very unpleasant odor and contains variety of chemical elements which don t allow reusing of this water without additional treatment. Practically process water is mixed with treated water and then it is treated in bioreactor with bacteria. The present task is to find solution on water treatment to remove contaminants and odor. Cooldown. In case of damage or forced shutdown of TDU-R unit, desorption chamber shall be cooled down for several hours, so it is impossible to start repair immediately. In this case there is no alternative at the present moment. Coarse debris. In case of treatment of material from old cuttings pits, drill cuttings shall be screened using shale shaker. TDU-R is not designed to treat coarse debris. Other plants such as Incinerator or cyclic UTD are used for coarse debris, stones and metal. Page 5 of 18

6 Untreated drilling mud Treated drilling mud Shale shakers Centrifuges Solids control equipment Drying unit like MCS Drying centrifuge like WSM-04 Page 6 of 18

7 2. Performance parameters TDU-R unit is designed to treat drill cuttings generated during drilling: Drill cuttings after cleaning system (shakers, centrifuges and other solids control equipment equipment) Dried drill cuttings after vertical centrifuge like WSM-04, Dryer or Verti-G Dried drill cuttings after Cuttings Separator like MCS or other equipment like Rotary Vac. Drill cuttings of any viscosity or used drilling mud TDU-R unit is able to treat 1-2 tons/hour of hydrocarbon-based drill cuttings. Preferable drill cuttings for treatment: Hydrocarbons content: Water content: Solid phase content: 10% of weight 10% of weight 80% of weight TDU-R capacity will be decreased in case of higher content of water and hydrocarbons. Maximum allowed content of liquid phase is up to 50% by weight: Hydrocarbons 25% Water 25% Solid phase 50% Final product after treatment: Dried drill cuttings in the form of fine solids with hydrocarbons content from 0.5% 0.01% Treated hydrocarbon phase (oil, fluid paraffin, diesel, synthetic and mineral oil) Process water Page 7 of 18

8 Diagram 1. Process flow diagram of TDU-R material treatment Fin Fan Cooler Gas cleaning screw Scrubber Condenser Feed hopper Separator Process module Scrubber oil Rec oil Water Discharge Diesel Burners Page 8 of 18

9 3. General description of TDU-R unit TDU-R unit consists of the following main components: 1. Material feed module (hopper, blade mixers, feed conveyor and working platform with stairs) 2. Process module (two desorption chambers, fire box and heating system which includes 4 burners of premium class) 3. Dried material discharge module (outlet box, discharge screw conveyor, solid phase outlet box and rotary valve) 4. Gas treatment module (gas pipe with installed screw and gas scrubber) 5. Condensation and separation module (heat exchangers, water condenser and oil-water separator) 6. Non-condensable gas treatment module (residual gas goes through hydraulic seal, then through coal filter, after filter gas is burnt in fire box or is discharged to the atmosphere) 7. Cooling system module 8. Storage tanks 9. Control room (equipped container with control cabinets for motors and electrical equipment) 3.1 Material feed module Hopper with capacity 3m 3 is used for dry bulk, liquid and viscous drill cuttings. Material in feed hopper prevents entry of air into desorption chamber allowing to isolate drying process from entry of oxygen and avoid gas ignition. Two installed blade mixers are used for mixing of material with required rate depending on drill cuttings composition and different time periods. Level transmitter is installed on top of the hopper. This transmitter shuts down feed conveyor if material level in the hopper is decreased to critical level. Feed conveyor is so designed that it is possible to feed bulk material and material with any viscosity. Feed rate is controlled by control system which provides required volume of feed material in desorption chamber to maintain desired operating temperature and stable treatment process. Working platform with stairs is designed for operator's convenience to visually control technical process and for repair work. Page 9 of 18

10 The figure below shows model of material feed module Figure 1. Material feed module 3.2 Process module Process module includes fire box with two installed desorption chambers. The main process of material drying takes place in desorption chambers. Each chamber is equipped with mixing screw which moves material to discharge point of heated drill cuttings. Rotation speed of mixing screw can be regulated depending on basic characteristic of treated material. Mixing screw has several blades and scrapers which are installed axially in sections. Blades are so designed that they spread material equally on chamber wall circle-wise, then scraper removes stuck material which is moved slowly to outlet box and when moving the material is mixed constantly to ensure proper heat exchange and effective removal of hydrocarbons and water. 4 diesel burners are installed in a staggered order, each burner heats the specific area and maintains temperature set by operator in stable mode. Burners of premium class can operate on diesel oil and also on oil recovered during drill cuttings treatment. Page 10 of 18

11 The figure below shows model of process module Figure 2. Process module 3.3 Dried material discharge module Discharge module consists of two outlet boxes, discharge screw conveyor and rotary valve. Dried material is discharged through side hole of desorption chamber to outlet box-1. Screw conveyor discharges solid phase to outlet box-2 continuously. Sufficient level of solid phase is provided in outlet box-2 which serves as a seal to block air entry into the chamber. The box is equipped with level switch which controls timely opening of rotary valve for discharge of treated material. Page 11 of 18

12 The figure below shows model of dried material discharge module Figure 3. Dried material discharge module 3.4 Gas treatment module Gas line is the first stage of gas treatment for solids removal. Gas line is equipped with special screw. When vapor passes, small particles of solid phase hit flights of screw and settle down. Screw is started by timer to clean gas pipe from layer of settled particles and removes accumulated layer of small particles back to the chamber. The second stage is gas scrubber where remaining small particles of solid phase are settled down. When passing through oil flow, solids are saturated with oil, become heavy and settle down resulting in vapor cleaning. Small quantity of gas is condensed in this scrubber so scrubber can clean itself from settled dust. Level switch controls oil level in gas scrubber, surplus oil is pumped into feed hopper tank. Page 12 of 18

13 The figure below shows model of gas treatment module Figure 4. Gas treatment module 3.5 Condensation and separation module The first stage of condensation: treated gas passes through cooled tubes of heat exchanger. The second and third stages: gas and vapor condensation by water spraying. Gas is supplied to tanks with Raschig rings and numerous spray nozzles where vapor condensation takes place due to water spraying. The next stage is separation of condensed liquid into fractions. Gravity separator separates liquid into oil and water. Separated water and hydrocarbon fraction is pumped from separator to tanks. Page 13 of 18

14 The figure below shows model of condensation and separation module Figure 5. Condensation and separation module 3.6 Non-condensable gas treatment module Small quantity of gas which was not condensed in vapor condenser is removed from the unit through hydraulic seal, then through coal filter and after that is discharged to the atmosphere. The second option is burning of non-condensable gas in TDU-R fire box. For this purpose noncondensable gas line was designed which supplies gas through flame arrestor resulting in disposal of noncondensable gas and saving small quantity of oil. Operator can use either the first or the second option of gas disposal depending on situation which allows using one of the options. The third option of gas disposal is use of cold plasma. Page 14 of 18

15 The figure below shows model of non-condensable gas treatment module Figure 6. Non-condensable gas treatment module 3.7 Cooling system module Cooling system plays an important role in technical process providing required temperature conditions for all systems and process modules of the unit. Cooling system is filled with water and glycol usually at the ratio 50x50 depending on climate and place where fin fan cooler will be used. Temperature sensor of cooling system is displayed on control panel and operator can control operation of cooling system. The figure below shows model of cooling system module Figure 7. Cooling system module Page 15 of 18

16 3.8 Control room Control panel is installed in control room and is managed by control system Supervisory Control and Data Acquisition (SCADA). TDU-R unit is operated in automatic mode. Also distribution panels of electrical equipment of all systems, modules and PLC control panels are located in control room. The unit is equipped with audible and visual alarm so operator can respond immediately to any emergency situation. Remote control is provided for TDU-R so operator can control operation of the unit at a distance from control room. Video monitoring is provided for easy operation of TDU-R unit. The figure below shows model of control room Figure 8. Control room Page 16 of 18

17 Diagram 2. Overview screen of TDU-R operator interface Page 17 of 18

18 4. Project team TDU-R project was executed by team of professionals. Technical support, consultations and project support: 1. Viktor Bocharov Doctor of Biological Sciences, Candidate of Chemical Sciences, Professor. Russia 2. Elena Knysh Technical translator. Kazakhstan 3. Natalia Tereshenko Manager LLC Quality Group Belgorod. Russia 4. Ivo Klaric Director Eagle Technology. Bosnia and Herzegovina 5. Tore Ausland CEO Quality Group AS. Norway Engineers: 1. Danil Averkov Design Engineer. Russia 2. Aleksandr Ischuk - Design Engineer. Russia 3. Vladimir Polevoy - Design Engineer. Russia 4. Roman Selukov E&I Engineer. Russia TDU specialists with international work experience: 1. Vladimir Gargoma International specialist. Russia, 17 years of work experience 2. Vitaly Chaiko- International specialist. Kazakhstan, 16 years of work experience 3. Denis Chaiko - International specialist. Kazakhstan, 15 years of work experience Page 18 of 18

THE INITIATES PLC (TIP)

THE INITIATES PLC (TIP) THE INITIATES PLC (TIP) THERMALDESORPTION SERVICES THE INITIATES PLC TDU, Incinerator, Cleaning & Decontamination, E-waste Services Our Culture: Mission; vision; business core values OUR MISSION: To facilitate

More information

Your Equipment Manufacturer for Material Processing. Leading The Industry In Thermal Desorption Technology SOIL REMEDIATION

Your Equipment Manufacturer for Material Processing.  Leading The Industry In Thermal Desorption Technology SOIL REMEDIATION THERMAL REMEDIATION SOIL REMEDIATION DRILLING MUDS DRILL CUTTINGS Pyrolysis recovery SYSTEMs Leading The Industry In Thermal Desorption Technology Vulcan 70 Indirect Thermal Desorption Unit with Vapor

More information

THE INITIATES PLC (TIP) Waste Management & Industrial Cleaning Services

THE INITIATES PLC (TIP) Waste Management & Industrial Cleaning Services THE INITIATES PLC (TIP) Waste Management & Industrial Cleaning Services THE INITIATES PLC TDU, Incinerator, Cleaning & Decontamination, E-waste Services Our Culture: Mission; vision; business core values

More information

ROTARY DRYER CONSTRUCTION

ROTARY DRYER CONSTRUCTION ROTARY DRYER The Rotary Dryer is a type of industrial dryer employed to reduce or to minimize the liquid moisture content of the material it is handling by bringing it into direct contact with a heated

More information

Solids Control. Vertical Cuttings Dryer GNCD930 HEBEI GN SOLIDS CONTROL CO.,LTD

Solids Control. Vertical Cuttings Dryer GNCD930 HEBEI GN SOLIDS CONTROL CO.,LTD Vertical Cuttings Dryer GNCD930 HEBEI GN SOLIDS CONTROL CO.,LTD GN Vertical Cuttings Dryer Specification Model Capacity Drying Efficiency Screen Max Diameter Screen Opening Rotation Speed G Force Oil Tank

More information

ADVANCED Series 15P1 17P2 19P2

ADVANCED Series 15P1 17P2 19P2 A WIRTGEN GROUP COMPANY Continuous Mobile Asphalt Plants ADVANCED Series 15P1 17P2 19P2 02 03 The Advanced plants line combines the maximum portability of a continuous production plant with the quality

More information

Rotary Vacuum Dryer Technology

Rotary Vacuum Dryer Technology AADE-04-DF-HO-26 Rotary Vacuum Dryer Technology Mike Billeaud, VP Drill Cuttings Technology, The Hydro-Carbon Flow Specialist, Inc. This paper was prepared for presentation at the AADE 2004 Drilling Fluids

More information

ecodry Figure 1 - Process Diagram ecodry B General Process Description

ecodry Figure 1 - Process Diagram ecodry B General Process Description ecodry The process principal of the ecodry system is centered around the concept of drying in a closed steam loop, with a process-integrated thermal oxidation. The separation of flue gas from the drying

More information

DRY BULK HANDLING SYSTEM

DRY BULK HANDLING SYSTEM DRY BULK HANDLING SYSTEM Parson Marine Equipment is established in Singapore since July 2005. Our team of engineers have more than 25 years of experiences in providing customised integrated dry and wet

More information

HOW TO SELECT AN INDIRECT THERMAL TECHNOLOGY FOR INDUSTRIAL MATERIALS PROCESSING

HOW TO SELECT AN INDIRECT THERMAL TECHNOLOGY FOR INDUSTRIAL MATERIALS PROCESSING white paper HOW TO SELECT AN INDIRECT THERMAL TECHNOLOGY FOR INDUSTRIAL MATERIALS PROCESSING Better Thermal Processing Results Begin with Selecting the Right Technology Authored by Rob Grady Director of

More information

Vacuum - The Universal Conveying Force Suction and transportation of powders, liquids and gases

Vacuum - The Universal Conveying Force Suction and transportation of powders, liquids and gases Vacuum - The Universal Conveying Force Suction and transportation of powders, liquids and gases Thomas Ramme Dipl.-ing B.Eng.(Hons.), Nick Hayes MCMI Dip IM With the introduction of the ATEX guidelines

More information

BIOSOLIDS DRYER SYSTEM

BIOSOLIDS DRYER SYSTEM As the challenges of disposing of Class B biosolids become more daunting, forward-thinking treatment plants are searching for cost effective solutions that will help their communities become environmentally

More information

Tel Group

Tel Group www.wamechsi.com Tel +27 12 808 0682 sales@wamechsi.com VERTICAL SHAFT, LOW SPEED, AERATORS Technical Specifications Vertical shaft, low speed aerators are ideal for the bacterial oxidization of effluent

More information

Specialized in the design and the tailor-made production of dryers, coolers and thermal processing equipment for industrial use.

Specialized in the design and the tailor-made production of dryers, coolers and thermal processing equipment for industrial use. Specialized in the design and the tailor-made production of dryers, coolers and thermal processing equipment for industrial use. Thermal processing solutions Ingetecsa supplies thermal processing solutions

More information

THE INITIATES PLC (TIP) Industrial Cleaning & Decontamination Services

THE INITIATES PLC (TIP) Industrial Cleaning & Decontamination Services THE INITIATES PLC (TIP) Industrial Cleaning & Decontamination Services THE INITIATES PLC TDU, Incinerator, Cleaning & Decontamination, E-waste Services Our Culture: Mission; vision; business core values

More information

BLABO. Non-man entry tank cleaning and oil recovery system. Automated tank cleaning and. Designed for large, containing crude oil or heavy fuel oil

BLABO. Non-man entry tank cleaning and oil recovery system. Automated tank cleaning and. Designed for large, containing crude oil or heavy fuel oil BLABO Non-man entry tank cleaning and oil recovery system Automated tank cleaning and aboveground oil storage recovery tanks solutions Designed for large, containing crude oil or heavy fuel oil health,

More information

SOLIDS CONTROL AND DRILLING FLUIDS SPECIALISTS

SOLIDS CONTROL AND DRILLING FLUIDS SPECIALISTS OKC 405-418-2897 580-323-8431 Clinton IFS is an Independent Oilfield Services Company providing solids control and drilling fluids for vertical and horizontal drilling applications. Our management team

More information

International Process Plants

International Process Plants International Process Plants Stock #600344 Oilseed Preparation & Conditioning Line 300 MTPD Visit us at: www.ippe.com General OverviewOverview 300 metric tons/day Capacity Used for Only 5 Years Stored

More information

Burner Management and Combustion Control. Copyright 2014 Rockwell Automation, Inc. All Rights Reserved.

Burner Management and Combustion Control. Copyright 2014 Rockwell Automation, Inc. All Rights Reserved. Burner Management and Combustion Control Rev 5058-CO900E Industrial Combustion Team Overview Background and Industry Experience RA s IC&PG Team Expertise 3 Extensive experience working with Factory Mutual

More information

Wet Frac Sand Processing

Wet Frac Sand Processing Wet Frac Sand Processing Meeting the Demands of a Growing Market Oilfield Minerals Outlook, June 21, 2012 CHRISTOPHER KELLEY Sales Manager Objectives of Wet Frac Sand Processing - Liberate Individual Silica

More information

HS Dryer. Smart Solutions for Drying Compressed Air. Single Tower Heat Reactivated Desiccant Air Dryer. Engineered Air Products

HS Dryer. Smart Solutions for Drying Compressed Air. Single Tower Heat Reactivated Desiccant Air Dryer. Engineered Air Products Smart Solutions for Drying Compressed Air Single Tower Heat Reactivated Desiccant Air Dryer TM HS Dryer 800.943.794 www.engineeredairproducts.com Engineered Air Products Understanding Compressed Air Moisture

More information

Fifth Annual Waste Treatment Symposium, September Kelly Brown, BDP Industries, Inc.

Fifth Annual Waste Treatment Symposium, September Kelly Brown, BDP Industries, Inc. Fifth Annual Waste Treatment Symposium, September 2010 Kelly Brown, BDP Industries, Inc. Agenda Description of Operation Advantages / Disadvantages verses Other Options Performance Parameters Capital and

More information

2How does a vibratory fluid-bed dryer work?

2How does a vibratory fluid-bed dryer work? As appeared in April 2011 PBE Copyright CSC Publishing www.powderbulk.com Answers to five common questions about vibratory fluid-bed dryers Doug Schieber Carrier Vibrating Equipment A vibratory fluid-bed

More information

Concrete Water Recycling MIXER WASHING PLANT

Concrete Water Recycling MIXER WASHING PLANT Concrete Water Recycling MIXER WASHING PLANT The three Cs for the founders and their companies success are: Capacity, Competence, Courtesy. COMPANY Company Matec specializes in the design and development

More information

OFFICINE MINUTE VILLORBA - TREVISO

OFFICINE MINUTE VILLORBA - TREVISO OFFICINE MINUTE VILLORBA - TREVISO A15 A23 A25 A22 A23 A12 A14 A10 A21 A4 A3 A21 A2 A5 A21 A7 A21 A16 A17 A18 A21 A8 A1 A13 A14 A9 A19 A11 A20 A24 A1 - Linear gas burner A2 - Air mixing area A3 - Hot air

More information

Drying technologies for sewage sludge

Drying technologies for sewage sludge Drying technologies for sewage sludge www.andritz.com Sewage sludge treatment System solutions from a single sorce Reuse - Reduce - Recycle From waste to valuable substance by drying 1.000 kg 160 kg 44

More information

SHS AS A TECHNOLOGY PLATFORM FOR SUSTAINABLE & COMPETETIV ADVANTAGE

SHS AS A TECHNOLOGY PLATFORM FOR SUSTAINABLE & COMPETETIV ADVANTAGE SHS AS A TECHNOLOGY PLATFORM FOR SUSTAINABLE & COMPETETIV ADVANTAGE Taastrup, 02.11.2012 Siegfried Schmidt, Global Applied Science Team, VDN Mars GmbH Europe OVERVIEW Today s drying technology and it s

More information

Metalworking Vacuum Cleaners One Type Does Not Fit All As the metalworking industry becomes more specialized so does the equipment that cleans it.

Metalworking Vacuum Cleaners One Type Does Not Fit All As the metalworking industry becomes more specialized so does the equipment that cleans it. Metalworking Vacuum Cleaners One Type Does Not Fit All As the metalworking industry becomes more specialized so does the equipment that cleans it. As diverse as the metalworking industry is, it should

More information

Customers. The core of our innovation. Feeding&Conveying. Drying Dosing Temperature Control Refrigeration Granulation

Customers. The core of our innovation. Feeding&Conveying. Drying Dosing Temperature Control Refrigeration Granulation EN Customers. The core of our innovation Feeding&Conveying Drying Dosing Temperature Control Refrigeration Granulation Piovan Drying Technologies: Desiccant Bed Dryers Dried air is generated by means of

More information

Coal Handling and Processing. Advanced Solutions for Coal-Related Environmental Dust Control. Better Air is Our Business

Coal Handling and Processing. Advanced Solutions for Coal-Related Environmental Dust Control. Better Air is Our Business Coal Handling and Processing Advanced Solutions for Coal-Related Environmental Dust Control Better Air is Our Business Coal Handling and Processing Industry Leader Our Qualifications For more than 85 years,

More information

Introduction to Pharmaceutical Freeze Drying

Introduction to Pharmaceutical Freeze Drying Introduction to Pharmaceutical Freeze Drying David Debo, PE Date 1 Agenda Introduction Stages of the process System components 2 Introduction What is lyophilization? What is sublimation? Why freeze dry?

More information

OWEA Biosolids Specialty Workshop December 3, 2015

OWEA Biosolids Specialty Workshop December 3, 2015 Operation, Performance, Optimization, Advantages & Disadvantages OWEA Biosolids Specialty Workshop December 3, 2015 Dan Fronhofer, P.E. BDP Industries Recessed Chamber Press Plate & Frame Centrifuge Belt

More information

Single Tower Heat Reactivated Desiccant Air Dryer

Single Tower Heat Reactivated Desiccant Air Dryer Single Tower Heat Reactivated Desiccant Air Dryer iste Dryer Understanding Compressed Air Moisture in compressed air is damaging. Using untreated air results in water and contaminants in your air lines,

More information

HS Dryer. Smart Solutions for Drying Compressed Air. Single Tower Heat Reactivated Desiccant Air Dryer. Engineered Air Products

HS Dryer. Smart Solutions for Drying Compressed Air. Single Tower Heat Reactivated Desiccant Air Dryer. Engineered Air Products Smart Solutions for Drying Compressed Air Single Tower Heat Reactivated Desiccant Air Dryer TM HS Dryer 800.943.794 www.engineeredairproducts.com Engineered Air Products Moisture in compressed air is damaging.

More information

White paper Compressed air drying

White paper Compressed air drying White paper Compressed air drying White paper : Compressed air drying Table of content Introduction 4 Where does the water come from? 5 How to remove the water? 6 Drying methods 7 Refrigerant dryers 8

More information

HEADWORKS PERFORATED PLATE FILTER SCREEN ROTARY DRUM SCREEN IN CHANNEL PERFORATED DRUM SCREEN

HEADWORKS PERFORATED PLATE FILTER SCREEN ROTARY DRUM SCREEN IN CHANNEL PERFORATED DRUM SCREEN HEADWORKS PERFORATED PLATE FILTER SCREEN The Filter Screen eliminates operational disruptions caused by fibrous and other inorganic material. Depending on the perforated panel, the screening capture rate

More information

MANUAL. Page 1/44

MANUAL.     Page 1/44 MANUAL FOR INSTALLATION AND OPERATION OF A HEATING SYSTEM, CONSISTING OF HOT WATER WOOD PELLET BOILER FROM SERIES PELLETHERM V4 AND AUTOMATED WOOD PELLET BURNER FROM SERIES GP IV http:// www.greenecotherm.eu

More information

ASPHALT DRUM MIX PLANT - MDM 25 (20-30 TPH) I TECHNICAL SPECIFICATIONS COLD AGGREGATE FEEDER

ASPHALT DRUM MIX PLANT - MDM 25 (20-30 TPH) I TECHNICAL SPECIFICATIONS COLD AGGREGATE FEEDER ASPHALT DRUM MIX PLANT - MDM 25 (20-30 TPH) I TECHNICAL SPECIFICATIONS ROAD BUILDING COLD AGGREGATE FEEDER 2 x 2 bin aggregate feeder unit is with total capacity of 20 T. Gathering cum slinger conveyor

More information

integrated sludge treatment combined sludge drying and incineration

integrated sludge treatment combined sludge drying and incineration integrated sludge treatment combined sludge drying and incineration combined sludge drying and incineration Sludge is the unwanted by-product of the wastewater treatment process. After mechanical dewatering

More information

CPC PRODUCT DESCRIPTION

CPC PRODUCT DESCRIPTION CPC 40 60 PRODUCT DESCRIPTION The CHICAGO PNEUMATIC CPC 40-60 compressor is a quiet, complete and readyfor-use unit for the production of compressed air in industrial applications. OVERVIEW The CHICAGO

More information

Small size, big energy savings

Small size, big energy savings ATOX coal mill 2 Small size, big energy savings Key benefits - Handles all types and capacities of coal - Reliable, long-lasting operation - Simple, flexible operation - Superior separation efficiency

More information

PORTABLE PILOT TEST UNIT. Mike Hill Shirco Infrared Systems, Inc.

PORTABLE PILOT TEST UNIT. Mike Hill Shirco Infrared Systems, Inc. PORTABLE PILOT TEST UNIT BY Mike Hill Shirco Infrared Systems, Inc. DESCRIPTION The SHIRCO Portable Pilot Test Unit (Figure 1) was developed in response to the U.S. EPA Hazardous Waste Management Regulations

More information

ASPHALT PLANT. atlastechnologiesindia.com

ASPHALT PLANT. atlastechnologiesindia.com ASPHALT PLANT MOBILE PLANT VARIANT: MDM 25 (20-30 tph) atlastechnologiesindia.com AGGREGATE FEEDING CONVEYOR AGGREGATE FEEDER In our mobile asphalt drum mix plant all the four bins are fitted with individual

More information

APPLICATION PROFILE EXPLOSIONS IN CEMENT PLANTS EXPLOSIONS IN CEMENT PLANTS CEMENT PLANT EQUIPMENT WITH HIGHEST EXPLOSION POTENTIAL. Form No.

APPLICATION PROFILE EXPLOSIONS IN CEMENT PLANTS EXPLOSIONS IN CEMENT PLANTS CEMENT PLANT EQUIPMENT WITH HIGHEST EXPLOSION POTENTIAL. Form No. APPLICATION PROFILE EXPLOSIONS IN CEMENT PLANTS Cement manufacturing is one of the largest mineral commodity industries in the United States, with an estimated production capacity of greater than 73 million

More information

PLASTER PLASTERBOARD GYPSUM BLOCKS. Gypsum Solutions

PLASTER PLASTERBOARD GYPSUM BLOCKS. Gypsum Solutions PLASTER PLASTERBOARD GYPSUM BLOCKS Gypsum Solutions 2 High tech solutions have a name Grenzebach Grenzebach stands for intelligent handling, processing and automation technology focused on quality & performance.

More information

DRYING OF MILK SPRAY DRYING

DRYING OF MILK SPRAY DRYING College of Agricultural Engineering and Technology Dept. of Agricultural Processing and Food Engineering Course : Dairy and Food Engineering Chapter 10 DRYING OF MILK (Objectives of milk drying, Spray

More information

Acrison. Polymair. Model 500 Polyelectrolyte Preparation System. For Dry and Liquid Polymers. Industrial and municipal chemical feed equipment.

Acrison. Polymair. Model 500 Polyelectrolyte Preparation System. For Dry and Liquid Polymers. Industrial and municipal chemical feed equipment. Acrison Bulletin 500 Polymair Model 500 Polyelectrolyte Preparation System For Dry and Liquid Polymers Industrial and municipal chemical feed equipment. Acrison Polymair Model 500 Acrison Polyelectrolyte

More information

There are two devices used together for heating crude oil in petroleum refinery as in figure (1), and these devices are:

There are two devices used together for heating crude oil in petroleum refinery as in figure (1), and these devices are: Heating of Crude Oil 1.Introduction: There are two devices used together for heating crude oil in petroleum refinery as in figure (1), and these devices are: Heat Exchangers. Tube Still Heaters (Furnaces).

More information

Introduction to Control Technology

Introduction to Control Technology Chapter 13 Introduction to Control Technology Introduction to Control Technology Carbon adsorption Incineration Condensation Bioreaction Carbon Adsorption 13-1 Activated Carbon A class of materials Produced

More information

REFRESH, UPGRADE, PERFORM. Revamping Kits and Digital Solutions for quality improvement and energy savings

REFRESH, UPGRADE, PERFORM. Revamping Kits and Digital Solutions for quality improvement and energy savings Revamping Kits and Digital Solutions for quality improvement and energy savings Burners Sacmi for energy savings Complete range of burners for all fuel types. Heads specially designed for different capacities

More information

Pre-cleaning for the CRC with Sponge Media Presented By: Ted Valoria Vice President, North America Sponge-Jet, Inc. Project TV

Pre-cleaning for the CRC with Sponge Media Presented By: Ted Valoria Vice President, North America Sponge-Jet, Inc. Project TV Pre-cleaning for the CRC with Sponge Media Presented By: Ted Valoria Vice President, North America Sponge-Jet, Inc. Project 20150207TV 2 Overview: Empire Southwest LLC (Mesa, AZ US) Sells, rents and services

More information

Operating Instructions for Fristam Powder Mixer

Operating Instructions for Fristam Powder Mixer Operating Instructions for Fristam Powder Mixer The Fristam Powder Mixer is used to dissolve or suspend powdery or liquid ingredients (e.g. sugar, milk powder, cocoa powder, thickeners, oils and liquid

More information

Ashirwad Carbonics (India) Private Limited

Ashirwad Carbonics (India) Private Limited Ashirwad Carbonics (India) Private Limited Co2 Production Plant Technical Literature Our precision engineered range of CO2 Generation Plant is available in various capacities and models as per the clients

More information

Rozp.UE2015/ kw kw

Rozp.UE2015/ kw kw Rozp.UE2015/1189 7 kw - 7000 kw Production Company Heiztechnik is a modern factory that produces boilers for burning solid fuels from 3,9 kw do 7 MW and complete container boiler rooms and other heating

More information

XI'AN KOSUN MACHINERY CO.,LTD.

XI'AN KOSUN MACHINERY CO.,LTD. VERTICAL CUTTINGS DRYER XI'AN KOSUN MACHINERY CO.,LTD. Since 1992 Solids Control Equipment Integrated Drilling Waste Management 1.Application The Vertical cuttings Dryer improves overall cost-efficiency

More information

Boiler Basics. Design and operation

Boiler Basics. Design and operation Boiler Basics Design and operation A boiler is an enclosed vessel that provides a means for combustion heat to be transferred into water until it becomes heated water or steam. The hot water or steam under

More information

Refrigeration Systems and Accessories

Refrigeration Systems and Accessories As with the Chapter Review Tests and the Final Exam, the tests your understanding of the materials underlying the learning objectives. After you ve reviewed your answers to the Chapter Review Tests, try

More information

SOLIDS CONTROL EQUIPMENT AND ENVIRONMENTAL SERVICES FOR DRILLING WASTES MINIMIZATION AND UTILIZATION

SOLIDS CONTROL EQUIPMENT AND ENVIRONMENTAL SERVICES FOR DRILLING WASTES MINIMIZATION AND UTILIZATION EQUIPMENT CATALOG SOLIDS CONTROL EQUIPMENT AND ENVIRONMENTAL SERVICES FOR DRILLING WASTES MINIMIZATION AND UTILIZATION TABLE OF CONTENTS About company... 4 SOLIDS CONTROL EQUIPMENT Shale shaker... 6 Mud

More information

Efficiency and Design Improvements in Multiple Hearth & Fluid Bed Incinerators

Efficiency and Design Improvements in Multiple Hearth & Fluid Bed Incinerators Efficiency and Design Improvements in Multiple Hearth & Fluid Bed Incinerators CBE Chavond-Barry Engineering 400 Rt. 518, Blawenburg, NJ 08504 Outline Fluid Bed Incinerators (FBI s) - Reversible Bed Resizing

More information

ASPHALT PLANT. atlasindustries.in

ASPHALT PLANT. atlasindustries.in ASPHALT PLANT Available as stationary and mobile. STATIONARY VARIANTS: DM 45 (40-60 tph), DM 50 (60-90 tph), DM 60 (90-120 tph) MOBILE VARIANTS: MDM 45 (40-60 tph), MDM 50 (60-90 tph), MDM 60 (90-120 tph)

More information

SM-SERIES Trommel screen machine SM 720 SA Plus

SM-SERIES Trommel screen machine SM 720 SA Plus 1. Product information 2017 SM-SERIES Trommel screen machine For highest performance at excellent screen result... Trommel screen machine About the PRODUCT Product Description The SM 720 Profi will be

More information

Recycling Solutions & Turnkey Systems

Recycling Solutions & Turnkey Systems Recycling Solutions & Turnkey Systems SYSTEMS AND SOLUTIONS FOR MSW, C&D, GREENWASTE, SINGLE STREAM, WASTE TO ENERGY, E-SCRAP AND SCRAP METAL System integration and design provided in association with:

More information

Oil and Gas Heaters ZICOM EQUIPMENT PTE LTD

Oil and Gas Heaters ZICOM EQUIPMENT PTE LTD AUSTRALIA 38 Goodman Place Murarrie, Qld 4172 Australia Telephone : +61 7 3390 7962 Facsimile : +61 7 3908 6088 THAILAND 95/15 Moo 1 Tumbon Bankaow Ampur Panthong, Chonburi 20160 Bangkok Telephone : +66

More information

UralActiv. manufacturer of products from polypropylene GAS WASHERS. UralActiv Ltd +7 (343)

UralActiv. manufacturer of products from polypropylene GAS WASHERS. UralActiv Ltd +7 (343) manufacturer of products from polypropylene GAS WASHERS CONTENT Introduction...2 1. Horizontal gas washers «Maximov»...3 1.1 Gas washer «Maximov», type «GM-2»...3 Additional configuration of gas washer

More information

Lubricated Rotary Screw Air Compressors

Lubricated Rotary Screw Air Compressors ShopTek TM Lubricated Rotary Screw Air Compressors 4-15 kw 5-20 Horsepower Simple Compact Reliable Low Maintenance Costs Quiet Sullair Capabilities Sullair Leadership Since 1965, Sullair has been recognized

More information

ASPHALT DRUM MIX PLANT - MDM 25 (20-30 TPH) I TECHNICAL SPECIFICATIONS COLD AGGREGATE FEEDER. Gathering cum slinger conveyor 500 mm x 7.

ASPHALT DRUM MIX PLANT - MDM 25 (20-30 TPH) I TECHNICAL SPECIFICATIONS COLD AGGREGATE FEEDER. Gathering cum slinger conveyor 500 mm x 7. ASPHALT DRUM MIX PLANT - MDM 25 (20-30 TPH) I TECHNICAL SPECIFICATIONS ROAD BUILDING COLD AGGREGATE FEEDER 2 x 2 bin aggregate feeder unit is with total capacity of 20 T. Gathering cum slinger conveyor

More information

Understanding Process Vacuum for Process Improvement

Understanding Process Vacuum for Process Improvement Understanding Process Vacuum for Process Improvement Through this article we wish to give practical tips to boost process capacity, increase product quality and reduce cycle time in batch or continuous

More information

Submittal Data Performance Data Electrical Data

Submittal Data Performance Data Electrical Data ERMS Series Submittal Data Submittal Data Unit Designation: Job name: Architect: Engineer: Contractor: Performance Data Revision: 07/01/11 Cooling Capacity: EER: Heating Capacity: COP: Ambient Air Temp:

More information

Semi-Automated / Automated COP Cleaning Process. August 1st, 2017

Semi-Automated / Automated COP Cleaning Process. August 1st, 2017 Semi-Automated / Automated COP Cleaning Process August 1st, 2017 CIP vs. COP Clean-In-Place (CIP) An automated system for cleaning processing equipment in place without disassembly. o Spray clean vessels

More information

ASPHALT PLANT. atlastechnologiesindia.com. MOBILE VARIANTS: MDM 45 (40-60 tph), MDM 50 (60-90 tph), MDM 60 ( tph)

ASPHALT PLANT. atlastechnologiesindia.com. MOBILE VARIANTS: MDM 45 (40-60 tph), MDM 50 (60-90 tph), MDM 60 ( tph) ASPHALT PLANT Available as stationary and mobile. STATIONARY VARIANTS: DM 45 (40-60 tph), DM 50 (60-90 tph), DM 60 (90-120 tph) MOBILE VARIANTS: MDM 45 (40-60 tph), MDM 50 (60-90 tph), MDM 60 (90-120 tph)

More information

APX. Nozzle-mix line burner

APX. Nozzle-mix line burner APX Nozzle-mix line burner Duct burners - APX Burner 4-21.9-1 Nozzle-mixing line burner for use with low pressure natural gas, propane and butane Eliminates leakage with its single-piece, aluminium extrusion

More information

CLEACOM Engineered System Solutions. Established 24/7 technology for the separation of dust and fume during compounding processes

CLEACOM Engineered System Solutions. Established 24/7 technology for the separation of dust and fume during compounding processes CLEACOM Engineered System Solutions Established 24/7 technology for the separation of dust and fume during compounding processes Reduced consumption of resources with dry separation. Wet separation with

More information

DM 45 (40-60 TPH) ASPHALT DRUM MIX PLANT - DM 50 (60-90 TPH) I TECHNICAL SPECIFICATIONS DM 60 ( TPH) COLD AGGREGATE FEEDER.

DM 45 (40-60 TPH) ASPHALT DRUM MIX PLANT - DM 50 (60-90 TPH) I TECHNICAL SPECIFICATIONS DM 60 ( TPH) COLD AGGREGATE FEEDER. DM 45 (40-60 TPH) ASPHALT DRUM MIX PLANT - DM 50 (60-90 TPH) I TECHNICAL SPECIFICATIONS DM 60 (90-120 TPH) ROAD BUILDING COLD AGGREGATE FEEDER Stationary four bin cold aggregate feeder unit is with each

More information

ASPHALT PLANT. atlastechnologiesindia.com. MOBILE VARIANTS: MDDM 45 (40-60 tph), MDDM 50 (60-90 tph), MDDM 60 ( tph)

ASPHALT PLANT. atlastechnologiesindia.com. MOBILE VARIANTS: MDDM 45 (40-60 tph), MDDM 50 (60-90 tph), MDDM 60 ( tph) ASPHALT PLANT Available as stationary and mobile. STATIONARY VARIANTS: DDM 45 (40-60 tph), DDM 50 (60-90 tph), DDM 60 (90-120 tph) MOBILE VARIANTS: MDDM 45 (40-60 tph), MDDM 50 (60-90 tph), MDDM 60 (90-120

More information

REGENERATION GAS HEATING: How It Works and What You Should Know

REGENERATION GAS HEATING: How It Works and What You Should Know REGENERATION GAS HEATING: How It Works and What You Should Know WRITERS INFO: Regeneration Gas Heating: How It Works and What You Should Know Jeff Ackel Sigma Thermal, Inc. CEO sigmathermal.com Q Zane

More information

APPLICATION BULLETIN COMBUSTION TURBINE FACILITIES. Overview

APPLICATION BULLETIN COMBUSTION TURBINE FACILITIES. Overview Overview Modern combustion (or gas) turbine packages typically include an axial compressor, a combustion section and a turbine. Both compressor and turbine sections consist of one or more sets of fixed

More information

Explosion Protection Engineering Principles

Explosion Protection Engineering Principles Handbook of Fire and Explosion Protection Engineering Principles for Oil, Gas, Chemical and Related Facilities Second edition Dennis P. Nolan ELSEVIER AMSTERDAM BOSTON HEIDELBERG LONDON NEW YORK OXFORD

More information

CPF PRODUCT DESCRIPTION

CPF PRODUCT DESCRIPTION CPF 175 340 PRODUCT DESCRIPTION The CHICAGO PNEUMATIC CPF 175-340 compressor is a quiet, complete and ready-for-use unit for the production of compressed air in industrial applications. OVERVIEW The CHICAGO

More information

Boretech China Make, Pet Bottles Recycling Line Ref Id SM4325 (Details-Specification mentioned hereunder are for indicative purpose only) DESIGN DATA 1.1 Capacity - PET bottles input : 1,500 kg/h - Dry

More information

Are Stone Grinding & Polishing Costs Taking A Huge Bite Out of Your Profits?

Are Stone Grinding & Polishing Costs Taking A Huge Bite Out of Your Profits? Are Stone Grinding & Polishing Costs Taking A Huge Bite Out of Your Profits? The ChemWest Particle Removal System Is The Clear Solution. Reduce Escalating Energy Costs Eliminate the need to run large centrifuge

More information

We are engaged in manufacturing, exporting, trading and supplying of Cooling Equipment such as Air Cooled Chillers, Water Cooled Chillers,

We are engaged in manufacturing, exporting, trading and supplying of Cooling Equipment such as Air Cooled Chillers, Water Cooled Chillers, +91-8048718646 Snowcool Systems India Private Limited http://www.chillers-coolers.com/ We are engaged in manufacturing, exporting, trading and supplying of Cooling Equipment such as Air Cooled, Water Cooled,

More information

Wastewater produced by chemical plants contains very few fibers, so dewatering the sludge is difficult.

Wastewater produced by chemical plants contains very few fibers, so dewatering the sludge is difficult. Centri-frugal wwdmag.com/sludge-management/centri-frugal Centrifuge system decreases manpower, increases sludge quality For a major wastewater treatment facility that serves five large chemical plants

More information

Thermal Oil Heating System. Heat Recovery System. Member of the

Thermal Oil Heating System. Heat Recovery System. Member of the Thermal Oil Heating System Heat Recovery System Member of the Thermal Oil Heating System Using energy efficiently and successfully when baking DAUB sets trends in developing ovens based on the Thermal

More information

Variable speed hydraulic coupling and drive unit of hydraulic coupling

Variable speed hydraulic coupling and drive unit of hydraulic coupling Variable speed hydraulic coupling and drive unit of hydraulic coupling I. Model designation YO / / / Modificait on code Output speed of drive unit (r/min) Input speed of coupling or drive unit (r/min)

More information

Upgrading of Anhydro Spray Drying Plants FOR EXTRA CAPACITY AND ENERGY SAVINGS

Upgrading of Anhydro Spray Drying Plants FOR EXTRA CAPACITY AND ENERGY SAVINGS Upgrading of Anhydro Spray Drying Plants FOR EXTRA CAPACITY AND ENERGY SAVINGS SPX Flow Technology Danmark A/S is an international engineering company with a consistent goal to provide our customers with

More information

hydrogone horizontal disc dryer A robust and proven design for high capacity sludge drying

hydrogone horizontal disc dryer A robust and proven design for high capacity sludge drying hydrogone horizontal disc dryer A robust and proven design for high capacity sludge drying A robust and proven design for high capacity sludge drying Sludge, the by-product of wastewater treatment, consists

More information

Key Question. What is the most important aspect to the removal and cleaning of material?

Key Question. What is the most important aspect to the removal and cleaning of material? Objectives Increase plant maintenance issue awareness Understand how and where new technology can make workplace safer Ideas to discuss cleaner and more efficient Key Question What is the most important

More information

ANDRITZ SEPARATION Thermal Treatment of Sludge

ANDRITZ SEPARATION Thermal Treatment of Sludge ANDRITZ SEPARATION Thermal Treatment of Sludge Sludge drying according to EU guidelines Principles: (in the order given below) Applicable to SEWAGE SLUDGE? Avoid waste Not possible Use waste materially

More information

Adsorption Chillers Energysmart Green Cooling

Adsorption Chillers Energysmart Green Cooling Adsorption Chillers Energysmart Green Cooling New Partners in innovation Leaders in Dehumidification... Worldwide Power Partner Inc USA www.bryair.com Recover Low Grade Process Waste Heat For Energy Smart

More information

CPVS PRODUCT DESCRIPTION

CPVS PRODUCT DESCRIPTION CPVS 20 30 PRODUCT DESCRIPTION The CHICAGO PNEUMATIC CPVS 20-30 compressor is a quiet, complete and ready-for-use unit for the production of compressed air for light and medium industrial applications.

More information

B r i g h t I d e a s

B r i g h t I d e a s CJC TM Desorber Solutions for removal of water from low and high viscosity oils, even in stable emulsions Intended for: Marine, Steel Works, Pulp & Paper, Mining, Power, Waste Oil Recovery Plants and Biodiesel

More information

D R Y P O L Y M E R P R O C E S S I N G NORCHEM

D R Y P O L Y M E R P R O C E S S I N G NORCHEM TM D R Y P O L Y M E R P R O C E S S I N G NORCHEM Powdercat System Flow Water Main Flexible Bulk Container Shut Off Valve Strainer Check Valve Pressure Regulator Pressure Gauge System Water Line POWDERCAT

More information

Heat pump and energy recovery systems

Heat pump and energy recovery systems SBS5311 HVACR II http://ibse.hk/sbs5311/ Heat pump and energy recovery systems Ir. Dr. Sam C. M. Hui Faculty of Science and Technology E-mail: cmhui@vtc.edu.hk Oct 2017 Contents Basic concepts Air-to-air

More information

ASPHALT PLANT. MOBILE VARIANTS: MDDM 45 (40-60 tph), MDDM 50 (60-90 tph), MDDM 60 ( tph) atlasindustries.in

ASPHALT PLANT. MOBILE VARIANTS: MDDM 45 (40-60 tph), MDDM 50 (60-90 tph), MDDM 60 ( tph) atlasindustries.in ASPHALT PLANT Available as stationary and mobile. STATIONARY VARIANTS: DDM 45 (40-60 tph), DDM 50 (60-90 tph), DDM 60 (90-120 tph) MOBILE VARIANTS: MDDM 45 (40-60 tph), MDDM 50 (60-90 tph), MDDM 60 (90-120

More information

VAC-U-DRY VACUUM DEHYDRATOR

VAC-U-DRY VACUUM DEHYDRATOR VAC-U-DRY VACUUM DEHYDRATOR Remove Free & Dissolved Water down to 20 PPM (0.002%) Flow range 5~60 gpm,19~225 lpm Visually Monitor Fluid and Process through Clear Chamber Covers High Operating Vacuum and

More information

Biosolids Management Utilizing Solar and Thermal Processes

Biosolids Management Utilizing Solar and Thermal Processes Biosolids Management Utilizing Solar and Thermal Processes By Chris Enloe-Instrument & Supply, Inc. And Shannon Jones, P.E.-Utilities Engineer City of Fayetteville What are biosolids? Biosolids are the

More information

Active Dry Air Venting for Water Contamination Control

Active Dry Air Venting for Water Contamination Control . PO Box 1299 Minneapolis, MN 5544 USA Industrial Hydraulics 1-8-846-1846 grphydfilters@donaldson.com Active Dry Air Venting for Contamination Control While required for biological life, water can be extremely

More information

Comparison of Options for Biosolids Dewatering

Comparison of Options for Biosolids Dewatering Comparison of Options for Biosolids Dewatering Water Environment School 2017 Clackamas Community College 3/28/2017; Session 7 Matt Sprick, PE Carollo Engineers Agenda Dewatering Overview and Purpose Math

More information

Munkebo Production A/S Profile

Munkebo Production A/S Profile Munkebo Production A/S Profile MUNKEBO PRODUCTION A/S Niels J. Assersen Managing Director Munkebo is mainly known as a manufacturer and supplier of vacuum units, as this has been our key product since

More information

Quality Construction Equipment

Quality Construction Equipment Quality Construction Equipment ASPHALT BATCH MIX PLANT ANP Series - 60 to 240 tph ASPHALT BATCH MIX PLANT Apollo has always been proactive in rising to customer demands and expectations by providing quality

More information