Series 4XSHV 18 Frame Driver 76mm Spherical Solids Handling

Transcription

1 18 Frame Driver 76mm Spherical Solids Handling Specifications: DISCHARGE...4", 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges LIQUID TEMPERATURE F (40 C) Continuous VOLUTE...Cast Iron ASTM A-48, Class 30 WEAR RING...C954 Lead-Free Bronze MOTOR HOUSING...Cast Iron ASTM A-48, Class 30 SEAL PLATE...Cast Iron ASTM A-48, Class 30 IMPELLER: Design...Vortex, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material...Ductile Iron ASTM A-536, SHAFT Stainless Steel O RINGS...Buna-N HARDWARE Series Stainless Steel LIFTING BAIL Series Stainless Steel PAINT SEAL:...Epoxy Dupont Corlar Amine Epoxy, Two Coats Design...Tandem Mechanical, Oil Filled Reservoir. Material: Inboard...Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard...Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware Series Stainless CORD ENTRY...Custom Molded, Quick Connected for Sealing and Strain Relief POWER CORD...CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately SPEED RPM (Nominal) UPPER BEARING: Design...Single Row, Ball, Oil Lubricated Load...Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load...Radial & Thrust MOTOR: Design...NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverter Duty rated per NEMA MG1 Insulation... Class H Varnish & Magnet Wire SINGLE PHASE... Requires overload protection to be included in control panel. Requires start components to be included in panel. Provided with pump. THREE PHASE V, kW. Requires Overload Protection to be Included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Normally Closed (N/C). To be wired in series with connector control circuit OPTIONAL EQUIPMENT... Seal Material, Impeller Trims, Cord Length, Leg Kit MARKINGS... CSA, CE PUMP WEIGHT lbs (99 Kg) NOISE EMISSION MAX... In-Air 65 db-a SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories...Break Away Fitting (BAF) Check Valve Control Panel Series: 4XSHV kW, 1450RPM, 50Hz Explosion Proof, Class 1, Division 1, Groups C & D, T4 DESCRIPTION: Canadian Standards Association File No. LR This product may be covered by one or more of the following patents and other patent(s) pending: US Patents 7,931,473 & 8,128,360 Sample Specifi cations: Section 0.1C Page F. SUBMERSIBLE NON-CLOG SEWAGE PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. 1 3/17

2 21 Frame Driver 76mm Spherical Solids Handling Specifications: Series: 4XSHV 11-22kW, 2850RPM, 50Hz 7.5kW, 1450RPM, 50Hz Explosion Proof, Class 1, Division 1, Groups C & D, T4 DESCRIPTION: Canadian Standards Association File No. LR This product may be covered by one or more of the following patents and other patent(s) pending: US Patents 7,931,473 & 8,128,360 Sample Specifi cations: Section Page F. SUBMERSIBLE NON-CLOG SEWAGE PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. DISCHARGE...4", 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges LIQUID TEMPERATURE F (40 C) Continuous VOLUTE...Cast Iron ASTM A-48, Class 30 WEAR RING...C954 Lead-Free Bronze MOTOR HOUSING...Cast Iron ASTM A-48, Class 30 SEAL PLATE...Cast Iron ASTM A-48, Class 30 IMPELLER: Design...Vortex, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material...Ductile Iron ASTM A-536, SHAFT Stainless Steel O RINGS...Buna-N HARDWARE Series Stainless Steel LIFTING BAIL Series Stainless Steel PAINT SEAL:...Epoxy Dupont Corlar Amine Epoxy, Two Coats Design...Tandem Mechanical, Oil Filled Reservoir. Material: Inboard...Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard...Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware Series Stainless CORD ENTRY...Custom Molded, Quick Connected for Sealing and Strain Relief POWER CORD...CSA Certifi ed Submersible Power Cable 2000V - Ordered Separately SPEED RPM or 1450 RPM (Nominal) UPPER BEARING: Design...Single Row, Ball, Oil Lubricated Load...Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load...Radial & Thrust MOTOR: Design...NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverted duty rated per NEMA MG1 Insulation... Class H Varnish & Magnet Wire THREE PHASE V. Requires Overload Protection to be Included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Three Normally Closed (N/C). To be wired in series with connector control circuit OPTIONAL EQUIPMENT... Seal Material, Impeller Trims, Cord Length, Leg Kit MARKINGS... CSA, CE PUMP WEIGHT lbs (181 Kg) NOISE EMISSION MAX... In-Air 73 db-a SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories...Break Away Fitting (BAF) Check Valve Control Panel 2 3/17

3 28 Frame Driver 76mm Spherical Solids Handling Specifications: DISCHARGE...4", 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges LIQUID TEMPERATURE F (40 C) Continuous VOLUTE...Cast Iron ASTM A-48, Class 30 WEAR RING...C954 Lead-Free Bronze MOTOR HOUSING...Cast Iron ASTM A-48, Class 30 SEAL PLATE...Ductile Iron ASTM A-536, IMPELLER: Design...Vortex, With Pump Out Vanes on Back Side. Dynamically Balanced ISO G6.3 Material...Ductile Iron ASTM A-536, SHAFT 416 Stainless Steel O RINGS...Buna-N HARDWARE Series Stainless Steel LIFTING BAIL Series Stainless Steel PAINT SEAL:...Epoxy Dupont Corlar Amine Epoxy, Two Coats Design...Tandem Mechanical, Oil Filled Reservoir. Material: Inboard...Rotating Faces - Carbon Stationary Faces - Ceramic Material: Outboard...Rotating Faces - Silicon Carbide Stationary Faces - Silicon Carbide Elastomer - Buna-N Hardware Series Stainless CORD ENTRY...Custom Molded, Quick Connected for Sealing and Strain Relief POWER CORD...CSA Certifi ed Submersible Power Cable 2000V SPEED RPM (Nominal) UPPER BEARING: Design...Single Row, Ball, Oil Lubricated Load...Radial LOWER BEARING: Design... Double Row, Ball, Oil Lubricated Load...Radial & Thrust MOTOR: Design...NEMA B Three Phase Torque Curve. Oil-Filled, Squirrel Cage Induction, Inverted duty rated per NEMA MG1 Insulation... Class H Varnish & Magnet Wire THREE PHASE V. Requires Overload Protection to be Included in control panel. MOISTURE SENSOR... Normally Open (N/O), Requires Relay in Control Panel TEMPERATURE SENSOR... Three Normally Closed (N/C). To be wired in series with connector control circuit OPTIONAL EQUIPMENT... Seal Material, Impeller Trims, Cord Length, Leg Kit MARKINGS... CSA, CE PUMP WEIGHT lbs (291 Kg) NOISE EMISSION MAX... In-Air 73 db-a SUBMERGENCE... Max Depth 66ft (20m) RECOMMENDED: Accessories...Break Away Fitting (BAF) Check Valve Control Panel Series: 4XSHV 30kW, 2850RPM, 50Hz Explosion Proof, Class 1, Division 1, Groups C & D, T4 DESCRIPTION: Canadian Standards Association File No. LR This product may be covered by one or more of the following patents and other patent(s) pending: US Patent 8,128,360 Sample Specifi cations: Section 0.1C Page F. SUBMERSIBLE NON-CLOG SEWAGE PUMP DESIGNED FOR RAW SEWAGE APPLICATIONS. 3 3/17

4 76mm Spherical Solids Handling 18 Frame Driver inches (mm) (444) (775) 6.76 (172) (335) 4.33 (110) 18 Frame Driver (4XSHVBA ONLY) Optional Leg Kit - p/n IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 5.) THIS PUMP IS NOT APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS 1 DIVISION 1 HAZARDOUS LOCATIONS. 4 9/15

5 76mm Spherical Solids Handling 21 Frame Driver inches (mm) 28 Frame Driver Optional Leg Kit - p/n IMPORTANT! 1.) MOISTURE AND TEMPERATURE SENSORS MUST BE CONNECTED TO VALI THE CSA LISTING. 2.) A SPECIAL MOISTURE SENSOR RELAY IS REQUIRED IN THE CONTROL PANEL FOR PROPER OPERATION OF THE MOISTURE SENSORS. CONTACT BARNES PUMPS FOR INFORMATION CONCERNING MOISTURE SENSING RELAYS FOR CUSTOMER SUPPLIED CONTROL PANELS. 3.) THESE PUMPS ARE CSA LISTED FOR PUMPING WATER AND WASTEWATER. DO NOT USE TO PUMP FLAMMABLE LIQUIDS. 4.) INSTALLATIONS SUCH AS DECORATIVE FOUNTAINS OR WATER FEATURES PROVIDED FOR VISUAL ENJOYMENT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE ANSI/NFPA 70 AND/OR THE AUTHORITY HAVING JURISDICTION. THIS PUMP IS NOT INTENDED FOR USE IN SWIMMING POOLS, RECREATIONAL WATER PARKS, OR INSTALLATIONS IN WHICH HUMAN CONTACT WITH PUMPED MEDIA IS A COMMON OCCURRENCE. 5.) THIS PUMP IS NOT APPROPRIATE FOR THOSE APPLICATIONS SPECIFIED AS CLASS 1 DIVISION 1 HAZARDOUS LOCATIONS. 5 9/15

6 6 12/13 XSHVA Pump XSHVB Pump MODEL NO PART NO kw VOLT PH Hz RPM (Nom) NEMA START CODE FULL LOAD AMPS LOCKED 1.2 SERVICE DRIVER ROTOR FACTOR AMPS FRAME AMPS CORD P/N * CORD SIZE CORD NOTES 4XSHVA40X G /4-18/4 SOLD SEPARATELY 4XSHVA40Z H /4-18/4 SOLD SEPARATELY 4XSHVA55Z J /4-18/4 SOLD SEPARATELY 4XSHVA75Z G /4-18/4 SOLD SEPARATELY 4XSHVA110Z C /4-18/4 SOLD SEPARATELY 4XSHVA150Z G /4-18/4 SOLD SEPARATELY 4XSHVA185Z E /4-18/4 SOLD SEPARATELY 4XSHVA15X J /4-18/4 SOLD SEPARATELY 4XSHVA15Z M /4-18/4 SOLD SEPARATELY 4XSHVB40X G /4-18/4 SOLD SEPARATELY 4XSHVB40Z H /4-18/4 SOLD SEPARATELY 4XSHVB55Z J /4-18/4 SOLD SEPARATELY 4XSHVB75Z G /4-18/4 SOLD SEPARATELY 4XSHVB110Z C /4-18/4 SOLD SEPARATELY 4XSHVB150Z G /4-18/4 SOLD SEPARATELY 4XSHVB185Z E /4-18/4 SOLD SEPARATELY 4XSHVB220Z D /4-18/4 SOLD SEPARATELY 4XSHVB300Z G /4-18/4 INCLUDED WITH PUMP 4XSHVB370Z F /4-18/4 INCLUDED WITH PUMP 4XSHVB15X J /4-18/4 SOLD SEPARATELY 4XSHVB15Z M /4-18/4 SOLD SEPARATELY 4XSHVB22X E /4-18/4 SOLD SEPARATELY 4XSHVB22Z K /4-18/4 SOLD SEPARATELY 4XSHVB40X E /4-18/4 SOLD SEPARATELY 4XSHVB40Z G /4-18/4 SOLD SEPARATELY 4XSHVB55Z G /4-18/4 SOLD SEPARATELY IMPORTANT! Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor. * Cord Suffi x: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL Feet. 76mm Spherical Solids Handling

7 7 9/15 XSHVBA Pump MODEL NO PART NO kw VOLT PH Hz RPM (Nom) NEMA START CODE FULL LOAD AMPS LOCKED 1.2 SERVICE DRIVER CORD ROTOR FACTOR AMPS FRAME P/N * AMPS CORD SIZE CORD NOTES 4XSHVBA185Z E /4-18/4 SOLD SEPARATELY 4XSHVBA220Z D /4-18/4 SOLD SEPARATELY 4XSHVBA300Z G /4-18/4 INCLUDED WITH PUMP 4XSHVBA370Z F /4-18/4 INCLUDED WITH PUMP 4XSHVBA40X E /4-18/4 SOLD SEPARATELY 4XSHVBA40Z G /4-18/4 SOLD SEPARATELY 4XSHVBA55Z G /4-18/4 SOLD SEPARATELY 4XSHVBA75Z H /4-18/4 SOLD SEPARATELY IMPORTANT! Moisture and Temperature sensor leads are integral to power cord. Pump rated for operation at ± 10% voltage at motor. * Cord Suffi x: XC - 30 Feet, XF - 50 Feet, XJ - 75 Feet, or XL Feet. 76mm Spherical Solids Handling

8 4-7.5kW, 2850RPM, 50Hz, 18 Frame 4XSHVA Pump 8 5/12

9 kW, 1450RPM, 50Hz, 18 Frame 4XSHVA Pump 9 5/13

10 kW, 2850RPM, 50Hz, 21 & 28 Frame 4XSHVA Pump 10 5/12

11 4-7.5kW, 2850RPM, 50Hz, 18 Frame 4XSHVB Pump 11 5/12

12 kW, 1450RPM, 50Hz, 18 Frame 4XSHVB Pump 12 5/13

13 11-30kW, 2850RPM, 50Hz, 21 & 28 Frame 4XSHVB Pump 13 5/12

14 kW, 1450RPM, 50Hz, 18 & 21 Frame 4XSHVBA Pump 14 9/15

15 kW, 2850RPM, 50Hz, 21 & 28 Frame 4XSHVBA Pump 15 9/15