CMA Dishmachines Knott Avenue Garden Grove, CA Undercounter High Temperature Dishwasher. Service Replacement Parts.

Size: px

Start display at page:

Download "CMA Dishmachines Knott Avenue Garden Grove, CA Undercounter High Temperature Dishwasher. Service Replacement Parts."

Marcus Carter
6 years ago
Views:

1 CMA Dishmachines 1700 Knott Avenue Garden Grove, CA 981 Toll Free: 1- (800) Fax: 1- (71) Service Replacement Parts Undercounter High Temperature Dishwasher Model: UC6e M Machine Serial No. Issue Date: Manual P/N rev. - For machines beginning with S/N W and above /B CMA Dishmachines 1700 Knott Avenue Garden Grove, CA 981 Toll Free: 1 (800) Fax: 1 (71) Printed in the USA

2 For future reference, record your dishwasher information in the box below. Model Number Serial Number Voltage Hertz Phase Service Agent Tel: Parts Distributor Tel: National Service Department CMA Dishmachines 1700 Knott Avenue Garden Grove, CA 981 Toll-free: 1 (800) Fax: 1 (71) ATTENTION: The model no., serial no., voltage, Hz and phase are needed to identify your machine and to answer questions. The machine data plate is located on the lower front panel. Please have this information ready if you call for service assistance. COPYRIGHT 016 All rights reserved Printed in the USA

3 Revision History Revision History The Revision History can contain part number changes, new instructions, or information that was not available at print time. We reserve the right to make changes to these instructions without notice and without incurring any liability by making the changes.. Equipment owners may request a revised manual, at no charge, by calling CMA Dishmachines at 1 (800) Revision Revised Serial Number Revision Date Pages Effectivity Description All W Released First Edition All Changed Item 6 to P/N All All Reviewed and updated parts lists i

4 Model Description Model Description UC6e M High temperature hot water sanitizing dishwasher with built-in 0 F/ C rise booster heater. 08-0VAC/60/1 ii

5 Table of Contents _ Table of Contents Model UC6e M Undercounter Dishwasher Revision History...i Model Descriptions...ii Service Replacement Parts...19 iii

6 Service Replacement Parts Service Replacement Parts Illustrations Page Wash Pump/Motor... 0 Booster... Power Box Wiring... Electrical Panel and Timer... 6 Control Panel... 8 Upper Final Rinse Piping Wash and Rinse Spray Arms... 3 Drain Pump and Hoses... 3 Wash Tank Heater and Drain Fill Solenoid Valve Detergent Pump... 0 Rinse-aid Pump... Panels... Door... 6 Dish racks, Line Strainer and PRV

7 Wash Pump/Motor

8 Wash Pump/Motor Item Part Description Qty. No. No SCREW, M, PHIL, PAN HD IMPELLER HOUSING COVER NUT, M6 (left-hand threads) WASHER, LOCK, 1/" WASHER, PLAIN, M IMPELLER SEAL GASKET, PUMP BACKPLATE, PUMP NUT, M PUMP/MOTOR ASSEMBLY COMPLETE, 0VAC/60/ COVER, REAR MOTOR FAN CAPACITOR 16μF 1 1

9 Booster

10 Booster Item Part Description Qty. No. No HEATER, BOOSTER kw, 08V, 0 F RISE 1 (Does not include gasket) * HEATER, BOOSTER 6kW, 08V, 70 F RISE 1 (Does not include gasket) GASKET, BOOSTER HEATER THERMOSTAT, CONTROL 19 F BOLT, HEX FLANGE, 1/-0 X 3/8" ELBOW, 3/8" NPT X 1/" HOSE TEE, RINSE THERMOMETER THERMOSTAT, HI-LIMIT FIXED SNAP 0 F TANK, BOOSTER WELDMENT CLAMP, GEAR-TYPE, 7/16" SST HOSE, 1/" ID A/R FITTING, BOOSTER THERMOMETER THERMOMETER, " DIAL, 7' CAPILLARY PLUG, 1/8" NUT, 6-3 W/NYLON INSERT FITTING, BOOSTER THERMOSTAT 1 * When the 6kW element is used the minimum supply circuit Ampacity and Overcurrent protection will need to increase to use a 0 Amp Breaker. 3

11 Power Wiring Box

12 Power Wiring Box Item Part Description Qty. No. No LABEL, CONNECTION BOX COVER, BOX WIRING BOX, WIRING SCREW, 6-3 X 1/" LUG, GROUND SCREW, 1/-0 X 3/8" BLOCK, TERMINAL, -POLE SCREW, 10-3 X 3/8", TRUSS HEAD BUSHING, STRAIN RELIEF, SMALL A/R CONTACTOR, 3-POLE, /0A, 10VAC COIL SCREW, 10-3 X 1/" RELAY, DPDT, 30A, 10VAC COIL LABEL, GROUND 1

13 Electrical Panel and Timer

14 Electrical Panel and Timer Item Part Description Qty. No. No SCREW, TRUSS HEAD, 8-3 X 1/" SWITCH, TIMER MOTOR, TIMER ASSEMBLY, TIMER (Includes Items, 3) SCREW, 6-3 X 1/" RELAY, 1 AMP, 10VAC COIL RELAY, 10VAC, PDT THERMOSTAT, WASH THERMOSTAT, B00STER 19 F MOTOR, PERI-PUMP 11VAC LABEL, WASH-RINSE TEMPERATURE SCREW, 6-3 X 3/8" PAN HEAD PHIL BRACKET SCREW, 10-3 X 3/8", TRUSS HEAD ASSY. PERI-PUMP (Includes Item 16 & 10) TUBE, SQUEEZE 8" 7

15 Control Panel

16 Control Panel Item Part Description Qty. No. No GUARD, SWITCH (Includes items 11 & 1) GASKET, STEAM LABEL, FACIA, UC6e M SWITCH, ROCKER, START MOMENTARY SWITCH, ROCKER, MAINTAINED SWITCH, ROCKER, DRAIN/FILL SCREW, TRUSS SLOT, 8-3 X 3/8" SWITCH, MOMENTARY (PRIME) SWITCH, ON-OFF PANEL, FACIA, UC6e M #10 WASHER LOCK NUT 9

17 Upper Final Rinse Piping

18 Upper Final Rinse Piping Item Part Description Qty. No. No HOSE, RUBBER 1/ID X.8OD A/R CLAMP, GEAR FITT COMP 1/OD X 1/8MPT ELL J PLUG, 1/8 HEX COUNTERSUNK MANIFOLD, RINSE INJECTOR FITTING TUBING, 1/" NATURAL A/R NUT, KEP 1/ WASHER, SPLIT LOCK 1/i 30SS BRACKET, VACUUM BREAKER NUT, JAMB 1/" VACUUM BREAKER, 1/" BRASS REPAIR KIT, VACUUM BREAKER 1/" COUPLER 1/ MPT X 1/" HOSE 1 31

19 Wash and Rinse Spray Arms

20 Wash and Rinse Spray Arms Item Part Description Qty. No. No WASHER, /16" SS WASHER NUT, 1/0-0 NYLON LOCK NUT HUB, UPPER WASH ARM WASHER, PACKING SCREW, RETAINING CLAMP, HOSE # HOSE, UPPER WASH ARM 1 8* BEARING ASSEMBLY O-RING, -1/8" OD X 1-3/" ID X 3/16" HUB, LOWER WASH ARM MANIFOLD, LOWER FWR WASH ARM ASSEMBLY (Includes Item 8) WASHER, NYLITE BOLT, 1/-0 X 1" SHAFT, LOWER O-RING HUB, RINSE ARM, MOLDED SCREW, TRUSS HEAD 8-3 X 1/" ARM, RIGHT-HAND RINSE (7 JETS) ARM, LEFT-HAND RINSE (8 JETS) CAP, RINSE ARM, / SPINDLE, RINSE ARM SPACER, NUT RINSE ARM ASSEMBLY (Includes Items 18-3) * Note: The bearing assembly, P/N includes bearings, 1 locknut, and 1 wash arm hub. The bearings, locknut and hub are not available as separate service replacement parts. 33

21 Drain Pump and Hoses From Final Rinse Manifold To upper washarm hub TO BOOSTER INLET 3 3

22 Drain Pump and Hoses Item Part Description Qty. No. No HOSE, FILL 1/" X 7' C/W 3/" FNPS BOLT, HEX FLANGE, 1/-0 X 3/8" HOSE, BOOSTER FILL, 1/" X 1' CLAMP, HOSE GEAR-TYPE /16" CLAMP, HOSE GEAR-TYPE, 1" HOSE, DRAIN PUMP SUCTION BRACKET, DRAIN PUMP PUMP, DRAIN 11VAC HOSE, DRAIN BRACKET, WASH PUMP CLAMP, HOSE GEAR-TYPE 1-13/16"- -3/" MAX HOSE, SUCTION WASH PUMP CLAMP, HOSE # HOSE, DISCHARGE WASH PUMP HOSE, UPPER WASH ARM HOSE RUBBER, 1/" ID X.8" OD A/R 17* COUPLER, 3/" MPT X 3/" HOSE BARB HOSE, DRAIN MOLDED NUT, ANTI-SIPHON VALVE O-RING BALL, 3/8" DIAMETER, STAINLESS STEEL WASHER, SILICONE BODY, ANTI-SIPHON CLAMP, HOSE GEAR-TYPE, STAINLESS STEEL * NOTE: ITEM 17 IS STRAPPED TO THE DRAIN HOSE AS A SEPARATE PART FOR THE PLUMBING INSTALLER TO USE DURING INSTALLATION. 3

23 36 Wash Tank Heater and Drain

24 Wash Tank Heater and Drain Item Part Description Qty. No. No GASKET, DOOR HEATER, WASH TANK, KW, 0VAC WASHER, SPLIT LOCK 1/" NUT, HEX 1/ O-RING ADAPTER, THERMOSTAT BUSHING, THERMOSTAT THERMOSTAT, WASH TANK ADAPTER, THERMOMETER THERMOMETER, " DIAL 7' CAPILLARY NUT, JAMB 1/" THIN PATTERN THERMOSTAT, FIXED, SNAP 1 F NUT, LOCK 6-3 W/NYLON INSERT SCREW, -0 X /8" PAN HEAD SWITCH, DOOR 1 AMP BRACKET, SWITCH PLATE, SWITCH NUT ELBOW, PUMP SUCTION GASKET, PUMP SUCTION FLANGE, PUMP SUCTION HOSE, 1/" ID X 3/8" OD A/R ELBOW, 3/8" TUBE X 1/" NPT GASKET, 1/" FIBER LOCKNUT, 1/" PLASTIC FILTER, SUMP FILTER, O-RING TUBE, OVERFLOW TRAP, AIR GASKET, AIR TRAP O-RING, NUT, AIR TRAP NUT, AIR TRAP CLAMP, HOSE AIR HOSE, AIR FT BRACKET SCREW, 6-18 X 1/" PAN HEAD. PHIL SWITCH, PRESSURE NUT, LOCK, 10-3 KEPS 1 37

25 Fill Solenoid Valve

26 Fill Solenoid Valve Item Part Description Qty. No. No WATER SOLENOID 1/" J/E COMPLETE 1 (Includes Items -6) WATER SOLENOID COIL J/E /" WATER SOLENOID BONNET WATER SOLENOID VALVE PLUNGER /" WATER SOLENOID REPAIR KIT FITTING, BARB HOSE BRACKET, VALVE, UC6E BOLT, HEX FLANGE 1/-0 X 3/8" FITTING, FLOW DISC, DEMA WASHER, FLOW 1 39

27 Detergent Pump a

28 Detergent Pump Item Part Description Qty. No. No STRAINER TUBE,STIFFENER, 1/" ID X 11-7/8" LG LABEL, DETERGENT HOSE, 1/ID X 3/8OD PVC A/R TIE, NYLON " TUBE, SQUEEZE 8" SCREW, 8-3 X 1/" PANHEAD COVER, PUMP ASSEMBLY, ROLLER SCREW, 10-3 X 1-1/" PANHEAD 10a SCREW, 10-3 X 1-1/" FLATHEAD BLOCK, PUMP MOTOR, PUMP 11VAC CONNECTOR, MALE BARREL ELBOW, 1/" HOSE BARB ASSEMBLY, PERI-PUMP COMPLETE 1 (Includes Items 6-13) 1

29 Rinse-Aid Pump a

30 Rinse-Aid Pump Item Part Description Qty. No. No STRAINER TUBE,STIFFENER, 1/" ID X 11-7/8" LG LABEL, RINSE AID TUBING, 1/8" ID X 1/" OD A/R TIE, CABLE -1/" TUBE, SQUEEZE 8" SCREW, 8-3 X 1/" PANHEAD COVER, PUMP ASSEMBLY, ROLLER SCREW, 10-3 X 1-1/" PANHEAD 10a SCREW, 10-3 X 1-1/" FLATHEAD BLOCK, PUMP MOTOR, PUMP 11VAC CONNECTOR, MALE BARREL TUBING, CHEMICAL 1/" NATURAL A/R CONNECTOR, /3" X 1/8" ASSEMBLY, PERI-PUMP COMPLETE 1 (Includes Items 6-13) 3

31 Panels

32 Panels Item Part Description Qty. No. No FITTING, COMP 1/" OD X 1/8 MPT ELL J ADAPTOR, 1/8" NPT X 1/" TUBE TUBING, CHEMICAL 1/" NATURAL A/R LABEL, GAUGE GAUGE, PRESSURE 0-60PSI THERMOMETER, " DIAL, 7' CAPILLARY BOLT, 1/-0 X 3/" TRUSS HEAD PANEL, FRONT UC6e FOOT, ADJUSTING NUT, KEPS, WRAP, OUTER PANEL CLAMP, DOUBLE CONDUIT PANEL, REAR SCREW TRUSS HEAD 10-3 X 3/8" FRAME STAND 1

33 Door

34 Door Item Part Description Qty. No. No DOOR WELDED ASSY ARM, DOOR SPRING SPRING, DOOR ACTUATOR, DOOR SWITCH SCREW, 8-3 X 3/8" TRUSS HEAD SEAL, DOOR HINGE, RH SEAL, DOOR HINGE, LH 1 7

35 Dish Racks, Line Strainer, PRV 1 3 8

36 Dish Racks, Line Strainer, PRV Item Part Description Qty. No. No DISH RACK, BOWL A/R DISH RACK, PEG A/R STRAINER, LINE 1/" Y VALVE, PRESSURE REGULATING (PRV) 1 9

MODEL CMA-180UC PARTS MANUAL Rev 1.18

MODEL CMA-180UC PARTS MANUAL Rev 1.18 CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 wwwcmadishmachines.com TABLE OF CONTENTS MODEL CMA-180UC 1. PARTS