CHAPTER 14 REFERENCED STANDARDS TABLE REFERENCED STANDARDS STANDARD NUMBER STANDARD TITLE APPLICATION

Transcription

1 CHAPTER 14 STANDARDS General Standards. The standards listed in Table are intended for use in the design, testing, and installation of materials, devices, appliances, and equipment regulated by this code. AHAM DW * Household Electric Dishwashers Appliances , AHAM FWD * Food Waste Disposers Appliances , APSP * Public Swimming Pools Swimming Pools, USPSHTC Spas, and Hot Tubs ASCE * Earthquake-Actuated Automatic Gas Shutoff Devices Fuel Gas , ASHRAE * Energy Standard for Buildings Except Low-Rise Residential Buildings Miscellaneous L , Table L ASHRAE * Energy-Efficient Design of Low-Rise Residential Buildings Miscellaneous , ASME A * Scheme for the Identification of Piping Systems Piping , ASME A * ASME A (R2010)* ASME A * ASME A (R2004)* TABLE STANDARDS Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water-Connected Receptors) Fittings Table Air Gap Fittings for Use with Plumbing Fixtures, Appliances, Fittings Table and Appurtenances Stainless Steel Drainage Systems for Sanitary DWV, Storm, Piping, Ferrous , Table and Vacuum Applications, Above- and Below Ground (Notes 1 and 7) Macerating Toilet Systems and Related Components Fixtures , ASME A * Water Heater Relief Valve Drain Tubes Appliances , ASME A * Water Closet Personal Hygiene Devices Fixtures , ASME A Plastic Fittings for Connecting Water Closets to the Sanitary Fittings , (R2010)* Drainage System ASME A Manually Operated, Quarter-Turn Shutoff Valves for Use in Valves , (R2010) Plumbing Systems ASME A M-1997 Floor-Affixed Supports for Off-the-Floor Plumbing Fixtures Fixtures , (R2008) for Public Use ASME A Framing-Affixed Supports for Off-the-Floor Water Closets Fixtures , (R2010)* with Concealed Tanks ASME A Floor and Trench Drains DWV Components , (R2007)* ASME A Roof, Deck, and Balcony Drains DWV Components , (R2008)* ASME A * Sanitary Floor Sinks Fixtures , ASME A (R2010)* Siphonic Roof Drains DWV Components ,

2 STANDARDS ASME A Backwater Valves Valves , (R2008)* ASME A Grease Interceptors Fixtures , (R2004)* ASME A Grease Removal Devices Fixtures , (R2007)* ASME A * FOG (Fats, Oils, and Greases) Disposal Systems Fixtures ASME A /CSA B ASME A /CSA B ASME A (R2008)* ASME A /CSA B * ASME A (R2004)* ASME A * Plumbing Supply Fittings Fittings , 403.5, 408.2, 408.3, 417.1, 417.3, 417.4, 420.2, , L , L , L Plumbing Waste Fittings Fittings , Performance Requirements for Backflow Protection Devices Backflow Protection 417.3, and Systems in Plumbing Fixture Fittings Flexible Water Connectors Piping , Deck Mounted Bath/Shower Transfer Valves with Integral Backflow Protection Valves Protectors/Insulators for Exposed Waste and Supplies on Miscellaneous , Accessible Fixtures Enamelled Cast Iron and Enamelled Steel Plumbing Fixtures Fixtures , ASME A /CSA B * ASME A Ceramic Plumbing Fixtures Fixtures L 402.2, L /CSA B * ASME A Stainless Steel Plumbing Fixtures Fixtures L /CSA B * ASME A * Trim for Water-Closet Bowls, Tanks, and Urinals Fixtures , ASME A * Hydromassage Bathtub Appliances Fixtures ASME A (R2008)* ASME A (R2011)* ASME A (R2011)* ASME A (R2010)* ASME A (R2011)* ASME A M-1985 (R2007)* ASME A M-1991 (R2008)* ASME B (R2006)* Dual Flush Devices for Water Closets Fixtures , Wall Mounted, Pedestal Mounted, Adjustable, Elevating, Tilting, and Pivoting Lavatory, Sink, and Shampoo Bowl Carrier Systems and Drainage Waste Systems Fixtures , Six-Liter Water Closets Equipped with a Dual Flushing Fixtures L Device Bathtubs/Whirlpool Bathtubs with Pressure Sealed Doors Fixtures , Vitreous China Nonwater Urinals Fixtures L Hydrants for Utility and Maintenance Use (Note 1) Valves , Cleanouts (Note 1) DWV Components , Pipe Threads, General Purpose, Inch Joints , , , , , , , , , , , (2) 100

3 STANDARDS Dryseal Pipe Threads, Inch Joints , ASME B (R2008)* ASME B * Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 Fittings ASME B * Malleable Iron Threaded Fittings: Classes 150 and 300 Fittings Table 604.1, Table ASME B * Gray Iron Threaded Fittings (Classes 125 and 250) Fittings Table ASME B * Pipe Flanges and Flanged Fittings: NPS 1/2 through NPS 24 Fittings , Metric/Inch ASME B * Cast Iron Threaded Drainage Fittings (Note 1) Fittings Table ASME B * Cast Copper Alloy Threaded Fittings: Classes 125 and 250 Fittings Table ASME B (R2005)* ASME B * Cast Copper Alloy Solder Joint Pressure Fittings (Note 1) Fittings Table Metallic Gaskets For Pipe Flanges: Ring-Joint, Spiral- Wound, and Jacketed Joints ASME B * Nonmetallic Flat Gaskets for Pipe Flanges Joints , ASME B (R2010)* ASME B (R2006)* ASME B * Wrought Copper and Copper Alloy Solder Joint Pressure Fittings , Table Fittings Cast Copper Alloy Solder Joint Drainage Fittings: DWV Fittings Table Cast Copper Alloy Pipe Flanges and Flanged Fittings: Classes 150, 300, 600, 900, 1500 and 2500 Fittings , ASME B * Cast Copper Alloy Fittings for Flared Copper Tubes Fittings Table ASME B * ASME B (R2007)* Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings DWV (Note 1) Manually Operated Metallic Gas Valves for use in Gas Piping Systems up to 125 psi (Sizes NPS 1/2 - NPS 2) Fittings Table Valves , ASME B * Valves-Flanged, Threaded, and Welding End Valves , ASME B * Malleable Iron Threaded Pipe Unions: Classes 150, 250 and 300 (Includes Revision Services) ASME B * Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems ASME B * Large Diameter Steel Flanges: NPS 26 through NPS 60 Metric/Inch ASME B (R2008)* Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings Fittings , Valves , Fittings , Fittings ASME B * Power Piping Piping , ASME B * Process Piping Piping F 12.1 ASME B36.10M-2004 (R2010)* ASME B (R2010)* ASME BPVC Section IV- 2010* Welded and Seamless Wrought Steel Pipe Piping, Ferrous (1) Stainless Steel Pipe Piping, Ferrous , Rules for Construction of Heating Boilers Miscellaneous ,

4 STANDARDS ASME BPVC Section VIII-2010* Rules for Construction of Pressure Vessels Division 1 Miscellaneous (2), (2), E ASME BPVC Section IX- Welding and Brazing Qualifications Certification 225.0, * ASPE 45 Siphonic Roof Drainage Storm Drainage , , , , ASSE * Atmospheric Type Vacuum Breakers Backflow Protection Table ASSE * Anti-Siphon Fill Valves for Water Closet Tanks Backflow Protection Table ASSE * Water Pressure Reducing Valves for Domestic Water Distribution Valves , Systems ASSE * Backflow Prevention Requirements for Commercial Dishwashing Backflow Protection , Machines ASSE * Home Laundry Equipment Appliances , ASSE * Plumbing Aspects of Residential Food Waste Disposer Units Appliances , ASSE * Water Hammer Arresters Water Supply Component , ASSE * Hose Connection Vacuum Breakers Backflow Protection , ASSE * Backflow Preventers with an Intermediate Atmospheric Vent Backflow Protection , ASSE * Reduced Pressure Principle Backflow Preventers and Backflow Protection Table Reduced Pressure Principle Fire Protection Backflow Preventers ASSE * Backflow Prevention Devices for Hand-Held Shower Backflow Protection , ASSE * Double Check Backflow Prevention Assemblies and Double Backflow Protection Table Check Fire Protection Backflow Prevention Assemblies ASSE * Automatic Compensating Valves for Individual Showers and Valves Tub/Shower Combinations ASSE * Temperature Actuated Mixing Valves for Hot Water Distribution Valves , Systems ASSE * Trap Seal Primer Valves-Potable Water Supplied Valves , ASSE * Vacuum Breaker Wall Hydrants, Freeze Resistant, Automatic Backflow Protection Table Draining Type ASSE * Pressure Vacuum Breaker Assembly Backflow Protection Table ASSE Drains Air Gaps for Domestic Dishwasher Applications Backflow Protection , ASSE * Backflow Preventer for Beverage Dispensing Equipment Backflow Protection , Table ASSE Hot Water Dispensers Household Storage Type-Electrical Appliances , ASSE * Dual Check Backflow Preventers Backflow Protection , ASSE * Dual Check Valve Type Backflow Preventers for Carbonated Backflow Protection , Beverage Dispensers, Post Mix Type ASSE * Laboratory Faucet Backflow Preventers Backflow Protection ,

5 STANDARDS ASSE Pressurized Flushing Devices (Flushometers) for Plumbing Backflow Protection , Fixtures ASSE * Trap Seal Primer Devices-Drainage Types and Electronic DWV Components , Design Types ASSE * Reduced Pressure Detector Fire Protection Backflow Prevention Backflow Protection Table Assemblies ASSE * Double Check Detector Fire Protection Backflow Prevention Backflow Protection Table Assemblies ASSE * Hose Connection Backflow Preventers Backflow Protection , ASSE Dual Check Backflow Preventer Wall Hydrants Freeze Resistant Type Backflow Protection , ASSE * Chemical Dispensing Systems Backflow Protection , ASSE * Spill Resistant Vacuum Breakers Backflow Protection Table ASSE Freeze Resistant Sanitary Yard Hydrant with Backflow Protection Backflow Protection , ASSE * Outdoor Enclosures for Fluid Conveying Components Miscellaneous , ASSE * Push-Fit Fittings Fittings , , Table ASSE * Temperature Actuated Flow Reduction (TAFR) Valves for Valves , Individual Fixture Fittings ASSE Individual Pressure Balancing In-Line Valves for Individual Valves , Fixture Fittings (Note 6) ASSE * Automatic Temperature Control Mixing Valves Valves ASSE * Water Temperature Limiting Devices Valves 409.4, 410.3, ASSE Temperature Actuated Mixing Valves for Plumbed Emergency Valves , Equipment ASSE Dielectric Pipe Unions Joints , , ASSE Series * Cross-Connection Control Professional Qualifications Certification ASSE Series * ASTM A (R2009) ASTM A (R2008) ASTM A 53/A 53M-2010 Professional Qualifications Standard for Medical Gas Certification , Systems Personnel Ferritic Malleable Iron Castings Piping, Ferrous , Gray Iron Castings Piping, Ferrous , Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded, and Seamless Piping, Ferrous Table 604.1, Table 701.1, (2) ASTM A Cast Iron Soil Pipe and Fittings (Notes 1 and 7) Piping, Ferrous Table ASTM A 106/A 106M ASTM A (R2009) ASTM A (R2006) ASTM A (R2007) Seamless Carbon Steel Pipe for High-Temperature Service Piping, Ferrous (3) Gray Iron Castings for Valves, Flanges, and Pipe Fittings Piping, Ferrous , Cupola Malleable Iron Piping, Ferrous , Copper-Brazed Steel Tubing Piping, Ferrous , E

6 STANDARDS ASTM A ASTM A Seamless and Welded Austenitic Stainless Steel Tubing for General Service Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes Piping, Ferrous F 8.2, Table Piping, Ferrous Table ASTM A Ductile-Iron Pressure Pipe Piping, Ferrous , (R2008) e1 ASTM A 479/A 479M- 2010a ASTM A (R2008) ASTM A (R2009) ASTM A 653/A 653M ASTM A (R2009) e1 ASTM A (R2008) ASTM A ASTM A ASTM A ASTM B (R2009) Stainless Steel Bars and Shapes for Use in Boilers and Other Piping, Ferrous F 8.3 Pressure Vessels Corrosion-Resistant High-Silicon Iron Castings Piping, Ferrous , Ductile Iron Castings Piping, Ferrous , Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy- Coated (Galvannealed) by the Hot-Dip Process Piping, Ferrous , Welded and Seamless Carbon Steel and Austenitic Stainless Piping, Ferrous , Steel Pipe Nipples High-Silicon Iron Pipe and Fittings (Note 1) Piping, Ferrous , Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications (Note 7) Piping, Ferrous Table Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Piping, Plastic , Connection of Water Closets to Sanitary Drainage Cast Iron Couplings used for Joining Hubless Cast Iron Soil Piping, Ferrous Pipe and Fittings Refined Lead Joints , ASTM B Solder Metal (Note 2) Joints , ASTM B Seamless Copper Pipe, Standard Sizes Piping, Copper Alloy Table ASTM B Seamless Red Brass Pipe, Standard Sizes Piping, Copper Alloy Table 604.1, Table ASTM B (R2010) Seamless Copper Tube (Note 7) Piping, Copper Alloy Table 604.1, Table ASTM B Seamless Copper Water Tube Piping, Copper Alloy 604.3, , , (1), (1), E 32.1, Table ASTM B Seamless Brass Tube Piping, Copper Alloy Table ASTM B Copper Sheet, Strip, Plate, and Rolled Bar Miscellaneous , ASTM B Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Miscellaneous , Bar, and Shapes ASTM B Aluminum and Aluminum-Alloy Drawn Seamless Tubes Piping, Ferrous ASTM B 241/B 241M ASTM B ASTM B Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube General Requirements for Wrought Seamless Copper and Copper-Alloy Tube (Note 7) Seamless Copper Tube for Air Conditioning and Refrigeration Field Service Piping, Ferrous , Piping, Copper Alloy Table 604.1, Table Piping, Copper Alloy , (1), (2), E

7 STANDARDS ASTM B Threadless Copper Pipe, Standard Sizes (Note 7) Piping, Copper Alloy Table 604.1, Table ASTM B Copper Drainage Tube (DWV) (Note 7) Piping, Copper Alloy , Table ASTM B Copper Sheet and Strip for Building Construction Miscellaneous , ASTM B Welded Copper Tube Piping, Copper Alloy Table ASTM B a Copper Alloy Sand Castings for General Applications (Note Piping, Copper Alloy , ) ASTM B Welded Brass Tube Piping, Copper Alloy , ASTM B Brass, Copper, and Chromium-Plated Pipe Nipples Piping, Copper Alloy , (R2005) e1 ASTM B ASTM B (R2006) ASTM B (R2010) Liquid and Paste Fluxes for Soldering of Copper and Copper Joints , Alloy Tube Seamless Copper Tube for Medical Gas Systems Piping, Copper Alloy (1), (3) Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings Joints , , ASTM C (R2009) Clay Drain Tile and Perforated Clay Drain Tile Piping, Non-Metallic Table ASTM C Nonreinforced Concrete Sewer, Storm Drain, and Culvert Piping, Non-Metallic Table Pipe (Note 7) ASTM C Asbestos-Cement Pressure Pipe Piping, Non-Metallic Table (R2009) e1 ASTM C a Concrete Drain Tile Piping, Non-Metallic , ASTM C (R2009) ASTM C (R2006) ASTM C ASTM C (R2009) Compression Joints for Vitrified Clay Pipe and Fittings Joints Asbestos-Cement Nonpressure Sewer Pipe (Notes 4, 5 and 7) Piping, Non-Metallic Table Joints for Concrete Pipe and Manholes, Using Rubber Joints , Gaskets Perforated Concrete Pipe Piping, Non-Metallic Table ASTM C Precast Reinforced Concrete Manhole Sections Miscellaneous , ASTM C Asbestos-Cement Underdrain Pipe Piping, Non-Metallic Table (R2009) e1 ASTM C a Rubber Gaskets for Cast Iron Soil Pipe and Fittings Joints ASTM C ASTM C (R2008) ASTM C (R2010) ASTM C ASTM C Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated (Note 7) Piping, Non-Metallic Table 701.1, Table Installing Asbestos-Cement Nonpressure Pipe Piping, Non-Metallic Table Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications (Note 1) Flexible Transition Couplings for Underground Piping Systems Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method Piping, Non-Metallic , Joints , Test procedures, condition of system

8 STANDARDS ASTM C Precast Concrete Septic Tanks DWV Components , ASTM C ASTM C a ASTM C ASTM C ASTM C ASTM C a ASTM D (R2005)* ASTM D Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 (Note 7) Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds Test procedures, condition of system Joints Joints , Joints , Joints , Joints Piping, Plastic Table Piping, Plastic , ASTM D * Poly (Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 (Note 7) Piping, Plastic Table 604.1, Table ASTM D Rubber Rings for Asbestos-Cement Pipe Joints , (R2010) ASTM D Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Joints (R2011)* Plastic Pipe and Fittings ASTM D * Polyethylene (PE) Plastic Pipe, (SDR-PR) Based on Piping, Plastic Table Controlled Inside Diameter ASTM D * Poly (Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Piping, Plastic Table Series) ASTM D * Underground Installation of Thermoplastic Pipe for Sewers Piping, Plastic , and Other Gravity-Flow Applications (Note 7) ASTM D * Threaded Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Fittings Table Schedule 80 (Note 1) ASTM D * Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule Fittings Table (Note 1) ASTM D * Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule Fittings Table (Note 1) ASTM D * Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings (Note 1) Piping, Plastic , (B), , (1), E 32.3 ASTM D * Reinforced Epoxy Resin Gas Pressure Pipe and Fittings Piping, Plastic E 32.3 ASTM D (R2009) * ASTM D (R2008)* Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe (Note 1) Joints , Fittings Table ASTM D * Heat Fusion Joining of Polyolefin Pipe and Fittings (Note 1) Joints ASTM D * Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings (Notes 1 and 7) Piping, Plastic Table

9 STANDARDS ASTM D * ASTM D a (R2009)* ASTM D (R2009)* ASTM D * ASTM D * Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings (Note 7) Piping, Plastic Table Joints for IPS PVC Pipe Using Solvent Cement Joints , Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Composite Sewer Piping (Note 7) Socket-Type Polyethylene Fittings for Outside Diameter- Controlled Polyethylene Pipe and Tubing Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings (Notes 1 and 7) Piping, Plastic Table Fittings Table 604.1, Table Piping, Plastic Table ASTM D * Polyethylene (PE) Plastic Tubing Piping, Plastic Table ASTM D * Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Piping, Plastic , Fittings (Notes 1 and 7) ASTM D * Underground Installation of Thermoplastic Pressure Piping Piping, Plastic , ASTM D b* Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot- and Piping, Plastic , Table Cold-Water Distribution Systems ASTM D Making Solvent-Cemented Joints with Poly (Vinyl Chloride) Joints , (R2010)* (PVC) Pipe and Fittings ASTM D Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Piping, Plastic , (R2007) e1 * Pipe ASTM D * Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Piping, Plastic , Fittings (Note 7) ASTM D * Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Piping, Plastic Table Outside Diameter ASTM D (R2009)* Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings Joints , ASTM D (R2011)* Solvent Cements for Transition Joints Between Acrylonitrile- Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Non-Pressure Piping Components Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals Joints , ASTM D (R2011)* Joints ASTM D * Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Joints , Seals ASTM D a* Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene Fittings Table 604.1, (PE) Plastic Pipe and Tubing Table ASTM D a* Drain, Waste, and Vent (DWV) Plastic Fittings Patterns (Note Fittings , ) ASTM D * Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Piping, Plastic , Pipe and Fittings ASTM D * Chlorinated Polyethylene (CPE) Sheeting for Concealed Miscellaneous , Water-Containment Membrane ASTM D a Polypropylene Injection and Extrusion Materials Miscellaneous , ASTM D (R2008) e1 * ASTM D (R2003) Poly (Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off Miscellaneous , Miscellaneous , ASTM E b* Surface Burning Characteristics of Building Materials Miscellaneous 701.1(2), 903.1(2), ASTM E b* Fire Tests of Building Construction and Materials Miscellaneous ,

10 STANDARDS ASTM E * Fire Tests of Penetration Firestop Systems Miscellaneous 208.0, 222.0, , ASTM F * Safe Handling of Solvent Cements, Primers, and Cleaners Joints , Used for Joining Thermoplastic Pipe and Fittings ASTM F * Corrugated Polyethylene (PE) Pipe and Fittings Piping, Plastic Table ASTM F (R2008)* ASTM F * ASTM F * ASTM F * ASTM F * ASTM F * ASTM F (R2009) ASTM F b e1 * ASTM F * ASTM F * ASTM F * Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings (Note 1) Piping, Plastic , Threaded Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Fittings Table Pipe Fittings, Schedule 80 Socket-Type Chlorinated Poly (Vinyl Chloride) (CPVC) Fittings Table Plastic Pipe Fittings, Schedule 40 Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings Table Fittings, Schedule 80 Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Piping, Plastic Table Schedules 40 and 80 Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Piping, Plastic Table (SDR-PR) Grab Bars and Accessories Installed in the Bathing Area Miscellaneous , Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), Schedule 40 and Schedule 80 Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core (Notes 1 and 7) Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings Piping, Plastic , Joints Piping, Plastic Table Joints , , ASTM F * Large Diameter Corrugated Polyethylene Pipe and Fittings Piping, Plastic , ASTM F * Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Piping, Plastic Table Diameter ASTM F Poly (Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Piping, Plastic Table (R2009)* Fittings Based on Controlled Inside Diameter (Note 7) ASTM F * Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Piping, Plastic , Waste Disposal Absorption Fields ASTM F * Crosslinked Polyethylene (PEX) Tubing Piping, Plastic , Table ASTM F * ASTM F * ASTM F * ASTM F * ASTM F (R2006)* ASTM F * ASTM F * Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core (Note 7) Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe (Note 7) Poly (Vinyl Chloride) (PVC) Corrugated Sewer Pipe with a Smooth Interior and Fittings (Note 7) Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube Crosslinked Polyethylene/Aluminum/ Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe Piping, Plastic Table Piping, Plastic Table Piping, Plastic , Piping, Plastic , Fittings Table 604.1, Table Piping, Plastic Piping, Plastic Table

11 STANDARDS ASTM F * ASTM F * Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service Piping, Plastic Table Piping, Plastic , ASTM F * Poly (Vinyl Chloride) (PVC) Gasketed Sewer Fittings Fittings , ASTM F * ASTM F * Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems Performance of Gasketed Mechanical Couplings for Use in Piping Applications Piping, Plastic , Joints , ASTM F e1 * Coextruded Composite Pipe (Note 7) Piping, Plastic Table ASTM F (R2008)* ASTM F * ASTM F * ASTM F e1 * ASTM F * ASTM F (R2011)* ASTM F (R2011)* ASTM F * ASTM F * ASTM F * ASTM F * ASTM F * ASTM F (R2006)* ASTM F * ASTM F * ASTM F * ASTM F (R2008)* Coextruded Composite Drain, Waste, and Vent Pipe (DWV) Piping, Plastic , Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems Rehabilitation of Existing Pipelines and Conduits by Pulledin-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP) Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing Special Engineered Fittings, Appurtenances or Valves for Use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems Factory Assembled Anodeless Risers and Tran sition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems Metal Insert Fittings for Polyethylene/ Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing Piping, Plastic , Piping, Plastic , Fittings Table Fittings Table Fittings , Fittings , Fittings Table Fittings Table Piping, Plastic Table Fuel Gas (2) Fittings , , Table Fittings , Fittings Table Joints Table Joints Table Flexible Pre-Insulated Piping Piping, Plastic ,

12 STANDARDS ASTM F * ASTM F * ASTM F Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock Crosslinked Polyethylene/Aluminum/ Crosslinked Polyethylene Tubing OD Controlled SDR9 Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications DWV Components Table Piping, Plastic Table Piping, Plastic , ASTM F Pressure-Rated Polypropylene (PP) Piping Systems Piping, Plastic , Table ASTM F * Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing Fittings , Table ASTM F * Field-Assembled Anodeless Riser Kits for Use on Outside Fuel Gas (3) Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing ASTM F Plastic Insert Fittings for SDR9 Cross-linked Polyethylene Fittings Table (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing ASTM F Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Piping and Fittings, Table Cold-Water Tubing and Distribution Systems Plastic ASTM F * Standard Practice for Internal Non Structural Epoxy Barrier Miscellaneous , Coating Material Used in Rehabilitation of Metallic Pressurized Piping Systems AWS A * Filler Metals for Brazing and Braze Welding Joints , , , , AWS A * Bare Stainless Steel Welding Electrodes and Rods Joints AWS B * Brazing Procedure and Performance Qualification Certification AWS B * Welding Procedure and Performance Qualification for Thermoplastics Joints, Certification AWWA C * Ductile-Iron and Gray-Iron Fittings Fittings Table AWWA C * Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Joints , Fittings AWWA C * Ductile-Iron Pipe, Centrifugally Cast Piping, Ferrous Table AWWA C * Ductile-Iron Compact Fittings for Water Service Fittings Table AWWA C * Coal-Tar Protective Coatings and Linings for Steel Water Miscellaneous , Pipelines - Enamel and Tape Hot Applied AWWA C * Liquid-Epoxy Coating Systems for the Interior and Exterior Miscellaneous of Steel Water Pipelines AWWA C * Fusion-Bonded Epoxy Coating for the Interior and Exterior Miscellaneous , of Steel Water Pipelines AWWA C * Extruded Polyolefin Coatings for the Exterior of Steel Water Miscellaneous , Pipelines AWWA C * Metal-Seated Gate Valves for Water Supply Service Valves , AWWA C * Rubber Seated Butterfly Valves, 3 in. (75 mm) through 72 in. (1800 mm) Valves ,

13 STANDARDS AWWA C * Ball Valves, 6 in. through 48 in. (150 mm through 1200 mm) Valves , AWWA C * Double Check Valve Backflow Prevention Assembly Backflow Protection Table AWWA C * Reduced-Pressure Principle Backflow Prevention Assembly Backflow Protection Table AWWA C * Grooved and Shouldered Joints Joints , AWWA C * Polyvinyl Chloride (PVC) Pressure Pipe and Fabricated Piping, Plastic Table Fittings, 4 in. through 12 in. (100 mm through 300 mm), for Water Transmission and Distribution AWWA C * Polyethylene (PE) Pressure Pipe and Tubing, 1/2 in. (13 mm) Piping, Plastic Table through 3 in. (76 mm), for Water Service AWWA C * Cross-Linked Polyethylene (PEX) Pressure Pipe, 1/2 in. (12 Piping, Plastic Table mm) through 3 in. (76 mm), for Water Service AWWA C * Injection-Molded Polyvinyl Chloride (PVC) Pressure Fittings , Fittings, 4 in. through 12 in. (100 mm through 300 mm), for Water Distribution CEAM Watermain and Service Line Installation Miscellaneous CEAM Sanitary Sewer and Storm Sewer Installation Miscellaneous CGA C (R2008) Standard Color Marking of Compressed Gas Containers for Medical Use Miscellaneous CGA G Cleaning Equipment for Oxygen Service Miscellaneous , , CGA S Pressure Relief Device Standards-Part 3-Stationary Storage Fuel Gas F 5.8 Containers for Compressed Gases CGA V Compressed Gas Cylinder Valve Outlet and Inlet Connections Valves F 6.6, F 7.4 CISPI Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Piping, Ferrous Table Storm Drain, Waste, and Vent Piping Applications (Notes 1 and 7) CISPI Couplings for Use in Connection with Hubless Cast Iron Soil Joints Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications CSA No U.S. Requirements for Excess Flow Valves Fuel Gas , CSA A Concrete Pipe and Manhole Sections Piping , CSA B (R2008) General Requirements for Plumbing Fixtures Fixtures , CSA B (R2008) Plastic Plumbing Fixtures Fixtures , CSA B (R2008) Macerating Systems and Related Components DWV Components , CSA B (R2006) Hydromassage Bathtubs Fixtures , CSA B Glass Lavatories Fixtures , CSA B Backflow Preventers and Vacuum Breakers Backflow Protection ,

14 STANDARDS CSA B Atmospheric Vacuum Breakers (AVB) Backflow Protection Table CSA B Pressure Vacuum Breakers (PVB) Backflow Protection Table CSA B Hose Connection Vacuum Breakers (HCVB) Backflow Protection , CSA B Hose Connection Dual Check Vacuum Breakers (HCDVB) Backflow Protection Table CSA B Reduced Pressure Principle (RP) Backflow Preventers Backflow Protection Table CSA B Reduced Pressure Principle Backflow Preventers for Fire Protection Systems (RPF) Backflow Protection Table CSA B Double Check Valve (DVCA) Backflow Preventers Backflow Protection Table CSA B Double Check Valve Backflow Preventers for Fire Protection Systems (DVCAF) Backflow Protection Table CSA B Laboratory Faucet Vacuum Breakers (LFVB) Backflow Protection , CSA B Design, Material, and Manufacturing Requirements for Prefabricated Septic Tanks and Sewage Holding Tanks DWV Components , CSA B Commercial and Residential Drains and Cleanouts DWV Components , CSA B Plumbing Fittings Fittings 409.4, 410.3, 421.2, Table CSA B /B Design and Installation of Non-Potable Water Systems/Maintenance Miscellaneous , and Field Testing of Non-Potable Water Systems (Note 1) CSA B Polyethylene (PE) Pipe, Tubing, and Fittings for Cold-Water Piping, Plastic Table Pressure Services CSA B Crosslinked Polyethylene (PEX) Tubing Systems for Pressure Piping, Plastic Table Applications CSA B Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Piping, Plastic Table Composite Pressure-Pipe Systems CSA B Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Piping, Plastic Table (PEX-AL-PEX) Composite Pressure-Pipe Systems CSA B Polypropylene (PP-R) Pipe and Fittings for Pressure Applications Piping, Plastic , Table CSA B Polyolefin and Polyvinylidene Fluoride (PVDF) Laboratory Piping, Plastic , Drainage Systems CSA B Groove- and Shoulder-Type Mechanical Pipe Couplings Fittings , CSA B Water Pressure Reducing Valves for Domestic Water Supply Valves , Systems CSA B Grease Interceptors DWV Components , CSA G Corrugated Steel Pipe Products Piping, Ferrous , CSA LC-1a-2009* CSA LC (R2005)* CSA LC * Fuel Gas Piping Systems Using Corrugated Stainless Steel Fuel Gas Tubing (CSST) (same as CSA 6.26a) Appliance Stands and Drain Pans Miscellaneous , Press-Connect Copper and Copper Alloy Fittings for Use in Fuel Gas Distribution Systems (same as CSA 6.32) Fuel Gas

15 STANDARDS CSA Z a-2009* CSA Z b-2008 (R2010)* Gas Water Heaters Volume I, Storage Water Heaters with Input Ratings of Btu Per Hour or Less (same as CSA 4.1a) Gas Water Heaters Volume III, Storage Water Heaters with Input Ratings Above Btu Per Hour, Circulating and Instantaneous (same as CSA 4.3b) Fuel Gas, Appliances , Fuel Gas, Appliances Table L CSA Z21.12b-1994 Draft Hoods Fuel Gas, Appliances , (R2010)* CSA Z21.13a-2010* Gas-Fired Low Pressure Steam and Hot Water Boilers (same Fuel Gas, Appliances , as CSA 4.9a) CSA Z * Manually Operated Gas Valves for Appliances, Appliance Fuel Gas , Connector Valves, and Hose End Valves (same as CSA 9.1) CSA Z21.22b-2001 Relief Valves for Hot Water Supply Systems (same as CSA Valves , (R2008)* 4.4b) CSA Z21.24a-2009* Connectors for Gas Appliances (same as CSA 6.10a) Fuel Gas (3), CSA Z a-1997 Gas-Fired, Heat Activated Air Conditioning and Heat Pump Fuel Gas, Appliances UMC (R2007)* Appliances (same as CSA 2.91a) CSA Z21.41b-2010* Quick-Disconnect Devices for Use with Gas Fuel Appliances Fuel Gas , (same as CSA 6.9b) CSA Z21.47b-2008* Gas-Fired Central Furnaces (same as CSA 2.3b) Fuel Gas, Appliances UMC CSA Z21.54b-2009* Gas Hose Connectors for Portable Outdoor Gas-Fired Appliances Fuel Gas (same as CSA 8.4b) CSA Z21.56a-2008* Gas-Fired Pool Heaters (same as CSA 4.7a) Fuel Gas, Swimming Pools, Spas, and Hot Tubs USPSHTC CSA Z * Connectors for Movable Gas Appliances (same as CSA 6.16) Fuel Gas (6) CSA Z21.80b-2010* Line Pressure Regulators (same as CSA 6.22b) Fuel Gas , (1) CSA Z21.81a-2007 Cylinder Connection Devices (same as CSA 6.25a) Fuel Gas , (R2010)* CSA Z * Vented Gas-Fired Space Heating Appliances (same as CSA Fuel Gas, Appliances UMC 2.32) CSA Z21.90b-2006* Gas Convenience Outlets and Optional Enclosures (same as Fuel Gas CSA 6.24b) CSA Z83.11b-2009* Gas Food Service Equipment (same as CSA 1.8b) Fuel Gas, Appliances UMC CSA Z * Special Requirements for Plumbing Installations in Health Miscellaneous , Care Facilities IAPMO IGC Tub/Shower Enclosures and Shower Panel Assemblies Fixtures , IAPMO IGC Pipeless Whirlpool Bathtub Appliances Fixtures IAPMO IGC Ball Valves Valves , IAPMO IGC Glass Lavatories, Sinks and Counter Tops Fixtures , IAPMO IGC Safety Plates, Plate Straps, Notched Plates and Safety Collars Miscellaneous , IAPMO IGC a Copper Alloy or Aluminum Alloy Sinks and Lavatories Fixtures ,

16 STANDARDS IAPMO IGC Metallic Bathtubs, Shower Pans and Whirlpool Bathtubs Fixtures , IAPMO IGC a Drinking Water Fountains With or Without Chiller or Heater Fixtures , IAPMO PS a Dishwasher Drain Airgaps Backflow Protection , IAPMO PS IAPMO PS c Metallic Fittings for Joining Polyethylene Pipe for Water Service and Yard Piping Flexible PVC Hose for Pools, Hot Tubs, Spas and Jetted Bathtub Joints , Fixtures, Swimming Pools, Spas, and Hot Tubs , 301.2, USPSHTC IAPMO PS Polyethylene Encasement Sleeve for Potable Water Pipe and Piping , Tubing IAPMO PS Lead Free Sealing Compounds for Threaded Joints Joints , IAPMO PS Black Plastic PVC or PE Pressure-Sensitive Corrosion Miscellaneous , Preventive Tape IAPMO PS Pipe Alignment & Secondary Support Systems Miscellaneous , IAPMO PS Cushioned Bathtubs and Whirlpool Bathtub Appliances Fixtures , IAPMO PS c Field-Fabricated Tiling Kits Miscellaneous , IAPMO PS Flush Valves with Dual Flush Device For Water Closets or Fixtures , Water Closet Tank with an Integral Flush Valves with a Dual Flush Device IAPMO PS Plastic and Metallic Expansion Joints Joints , IAPMO PS Pump/Dose, Sumps and Sewage Ejector Tanks with or DWV Components , without a Pump IAPMO PS Grooved Mechanical Pipe Couplings and Grooved End Joints , Fittings IAPMO PS Metallic and Plastic Utility Boxes Miscellaneous , IAPMO PS Bathwaste Strainer Drains Fixtures , IAPMO PS PVC Hydraulically Actuated Diaphragm Type Water Control Valves Valves , IAPMO PS Septic Effluent and Waste Water Diverter Valves or Diversion DWV Components , System IAPMO PS Sewage Holding Tank Containing Sewage Ejector Pump for DWV Components , Direct Mounted Water Closet IAPMO PS Plastic Leaching Chambers DWV Components , IAPMO PS a Pipe Flashings Miscellaneous , IAPMO PS Airgap Units for Water Conditioning Equipment Installation Backflow Protection IAPMO PS Dielectric Waterway Fittings Fittings , IAPMO PS Early-Closure Replacement Flappers or Early-Closure Fixtures , Replacement Flapper with Mechanical Assemblies IAPMO PS Bathwaste and Overflow Assemblies with Tub Filler Spout DWV Components ,

17 STANDARDS IAPMO PS Valves with Atmospheric Vacuum Breakers Valves , IAPMO PS Dental Vacuum Pumps Miscellaneous , IAPMO PS Ballcock or Flushometer Valve Tailpiece Trap Primers and DWV Components , Trap Primer Receptors/Adapters IAPMO PS Multiport Electronic Trap Primer DWV Components , IAPMO PS Clarifiers DWV Components , IAPMO PS Precast Concrete Seepage Pit Liners and Covers DWV Components , IAPMO PS Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Fittings , Fittings IAPMO PS Tools for Mechanically Formed Tee Connections in Copper Miscellaneous , Tubing IAPMO PS Rainwater Diverter Valve for Non-Roofed Area Slabs DWV Components , IAPMO PS Diverter and Shutoff Valves for Pool/Spas Swimming Pools, USPSHTC Spas, and Hot Tubs IAPMO PS Pre-Pressurized Potable Water or Expansion Tanks Miscellaneous , IAPMO PS Soaking and Hydrotherapy (Whirlpool) Bathtubs with Fixtures , Hydraulic Seatlift IAPMO PS Elastomeric Test Caps/Cleanout Caps DWV Components , IAPMO PS a Plastic Stabilizers for Use with Plastic Closet Bends DWV Components , IAPMO PS Heat Exchangers and Indirect Water Heaters Miscellaneous , IAPMO PS P-Trap, Supply Stop and Riser Insulated Protector Miscellaneous , IAPMO PS Drain, Waste, and Vent Hangers and Plastic Pipe Support DWV Components , Hooks IAPMO PS Passive Direct Solar Water Heaters Appliances USEC IAPMO PS Prefabricated Fiberglass Church Baptisteries Fixtures , IAPMO PS Terrazzo, Marble, Concrete, Granite, and Slate Plumbing Fixtures , Fixtures IAPMO PS Porous Filter Protector for Sub-Drain Weep Holes DWV Components , IAPMO PS Suction Relief Valves Valves , IAPMO PS Pressure Relief Connection for Dispensing Equipment Valves , IAPMO PS Polyethylene Distribution Boxes DWV Components , IAPMO PS Pre-Fabricated, Tileable Shower Receptors Fixtures , IAPMO PS Aramid Reinforced Rubber Hose for Use in Non-Potable Miscellaneous , Water Radiant Heating and Snowmelting IAPMO PS Restaurant Fire Suppression Systems Miscellaneous ,

18 STANDARDS IAPMO PS a PVC Cold Water Compression Fittings Fittings , IAPMO PS PVC Cold Water Gripper Fittings Fittings , IAPMO PS PVC Plastic Valves for Cold Water Distribution Systems Valves , Outside a Building and CPVC Plastic Valves for Hot and Cold Water Distribution Systems IAPMO PS Hydraulically Powered Household Food Waste Disposers Appliances , IAPMO PS e1 Remote Floor Box Industrial Water Supply, Air Supply, Miscellaneous , Drainage IAPMO PS Hot Water On-Demand or Automatic Activated Hot Water Miscellaneous , Pumping Systems IAPMO PS Hot Water Circulating Devices Which Do Not Use a Pump Miscellaneous , IAPMO PS Copper and Copper Alloy Tubing System Incorporating Fittings , Press-Type or Nail-Type Connections IAPMO PS Water Energized Sump Pump Miscellaneous , IAPMO Z * Plastic Bathtub and Shower Units Fixtures , IAPMO Z * Plastic Lavatories Fixtures , IAPMO Z * Plastic Water Closet Bowls and Tanks Fixtures , IAPMO Z * Plastic Toilet (Water Closet) Seats Fixtures , IAPMO Z Plastic Sinks Fixtures , IAPMO Z * Prefabricated Plastic Spa Shells Fixtures, Swimming Pools, Spas, and Hot , 301.2, USPSHTC Tubs IAPMO Z * Plastic Bathtub Liners Fixtures , IAPMO Z * Plastic Urinal Fixtures (Note 1) Fixtures L IAPMO Z * Prefabricated Septic Tanks DWV Components , IAPMO Z * Prefabricated Gravity Grease Interceptors DWV Components ICC A * Accessible and Usable Buildings and Facilities Miscellaneous ISEA Z * Emergency Eyewash and Shower Equipment Miscellaneous 416.1, ISO/IEC Guide General Requirements for Bodies Operating Product Certification Certification , Systems MSS SP Finishes for Contact Faces of Pipe Flanges and Connecting- Fuel Gas End Flanges of Valves and Fittings MSS SP * Marking Systems for Valves, Fittings, Flanges, and Unions Miscellaneous , MSS SP * Corrosion Resistant Gate, Globe, Angle and Check Valves Piping, Ferrous , with Flanged and Butt Weld Ends (Classes 150, 300 & 600) MSS SP * Steel Pipeline Flanges Fittings , MSS SP Pipe Hangers and Supports Materials, Design, Manufacture, Selection, Application, and Installation Fuel Gas ,