Pop Frenzy 6 Qt. Popcorn Popper OPERATING MANUAL

Transcription

1 Great Northern Popcorn Pop Frenzy 6 Qt. Popcorn Popper OPERATING MANUAL TM

2 IMPORTANT - All persons that will operate this equipment must read and become thoroughly competent with all operating procedures and safety precautions. Misuse of this equipment may result in death, personal injury, property damage, fire or electric shock. GENERAL SAFETY PRECAUTIONS 1. You will need this manual for the safety warnings and precautions, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference. 2. The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. 3. NEVER use this product for anything other than its intended use. NEVER modify this product. Failure to comply with the precautions, warnings and recommendations in this manual will nullify your warranty and may result in injury or even death. 4. BE SURE MACHINE IS PLUGGED INTO A PROPERLY GROUNDED DEDICATED OUTLET WHOSE ELECTRICAL OUTPUT MATCHES THE REQUIREMENTS OF THIS MACHINE. NEVER remove or modify grounding pin; do not use 3-prong adapters. AVOID using extension cords or 3-prong adaptors. If you must use an extension cord, use the shortest cord possible and use a cord that is rated for at least as high a rating as your appliance. Do not drape extension cords over counters or place in high traffic areas where accidental tripping or catching cold occur. Great Northern Popcorn Company is not liable for damages or injuries resulting from the use of extension cords or power strips. 5. DO NOT unplug the machine by pulling or tugging on the power cord. Firmly grasp the plug and remove from outlet. 6. MAKE SURE that the power outlet, plug and power cords used are in good condition. Worn, frayed or damaged plugs, cords and outlets should be replaced or repaired by a certified electrician who is properly qualified to meet local safety and electrical codes. Power supply cords should be replaced by the manufacturer. Route cord away from hot popper surfaces. 7. To reduce the risk of electrical shock or fire, MAKE SURE that your unit is properly grounded. NEVER TAMPER WITH, REMOVE OR CUT THE GROUNDING PIN!! 8. ALWAYS unplug the unit before cleaning or repairs. A qualified service technician should always perform service or repair. 9. This product is not intended for commercial use; INTENDED FOR HOUSEHOLD USE ONLY. 10. Do not cover the power cord. DO NOT immerse cord in water or use in high traffic areas. DO NOT run cord over carpets or heating sources or elements. NEVER use with damaged cords or plugs. 11. CAUTION! Appliance is HOT! ALWAYS use hot pads or handles when touching after use. DO NOT ATTEMPT TO MOVE OR TRANSPORT WITH HOT OIL. USE CAUTION WHEN UNLOADING! TO AVOID BURNS, TURN POPPER AWAY FROM YOU BEFORE TURNING OVER SO THAT STEAM, OIL AND HOT LIQUIDS WILL NOT COME INTO CONTACT WITH YOUR SKIN OR CLOTHES. 12. DO NOT operate with missing or broken parts. 13. This product is intended for INDOOR USE ONLY. DO NOT USE OUTDOORS. 14. Only qualified repair personnel should perform maintenance or service. Service or maintenance performed by unqualified personnel could result in injury. 15. Do not clean with flammable liquids or cleaners as this may cause an explosion or fire hazard. 16. DO NOT USE ON STOVETOP, OVEN, PLACE IN FREEZER OR REFRIGERATOR, ETC. 17. Use caution when operating around children. Do not allow children to operate or touch the machine when it is plugged in. 18. Do not use with 3rd party attachments. 19. Make sure the plug is fully inserted into the receptacle. USE ONLY IN A DEDICATED OUTLET: do not plug any other appliance into the same outlet. 20. AVOID OVERHEATING. Your popper is not supplied with an automatic shutoff. ALWAYS add oil and corn before plugging popper into outlet. 21.ALWAYS ATTACH POWER CORD TO POPPER, THEN PLUG INTO OUTLET. 22. USE ONLY ON A FLAT, LEVEL SURFACE. ALWAYS UNPLUG WHEN NOT IN USE!

3 P O P F R E N Z Y S T I R P O P P E R Makes up to 6 Quarts of Popcorn Non-Stick Surface Helps to Prevent Burnt Popcorn Heavy Duty Stir Rod Keeps Kernels Moving for Less Old Maids CUSTOMER SERVICE Built-in Butter Bin to Melt Evenly as Popcorn Pops 120V AC Power Heat Resistant Popper Bottom-Safe to Use on Table/Countertop Popper Dome Converts to Serving Bowl Customer service and product support are available online at WARRANTY AND RETURN POLICY The Great Northern Popcorn Company hot air poppers are warrantied against defects in material and workmanship for a period of one year for residential and personal use under normal conditions. Warranty is limited to replacement parts. Our return policy allows 30 days from the date of delivery to return products, provided it is new, unused and in the original packaging as received. We highly recommend that the buyer thoroughly inspect the purchased product before using it. We charge a 20% restocking charge on all returned items. Return shipping is the responsibility of the buyer. We cannot accept returns for any reason after 30 days from the date of delivery. A credit will be issued after the item is inspected and accepted. All shipping damages must be claimed with the designated shipper. Check the shipping carton for damage before signing the bill of lading. If an item is opened and deemed to be defective within 30 days from the date of delivery, please contact us at for return instructions. A Great Northern Popcorn Company RMA is required when returning defective merchandise. When returning your order please include a copy of your order number with date purchased, your Great Northern Popcorn Company RMA and the reason for the return. Warranty shall not apply to: products which are used for a purpose other than which they were designed for or which have been altered in any way that would be detrimental to the performance or life of the product. Misapplication, misuse or negligence will revoke the warranty.

4 P O P F R E N Z Y S T I R P O P P E R CUSTOMER POPPER PARTS: SERVICE A: Butter Bin Cover B: Butter Bin C: Popper Dome D: Stir Rod Cap E: Stir Rod F: Non-stick popping surface G: Power Cord A B C D E G F H: Handles I: Feet H I CUSTOMER BEFORE FIRST SERVICE USE: 1. Unpack your popper and make sure all parts are in good condition and ready to use. Next, wash the popper dome and butter bin cover in mild, warm soapy water and dry thoroughly. 2. Unscrew the stir rod cap and remove the stir rod. Wipe the stir rod and non-stick popping surface with mild, warm soapy water and dry thoroughly. Reassemble the stir rod and secure with stir rod cap. 3. Be sure to select a flat level surface to place your popper and make sure the cord is routed away from the popper s heating surfaces. Your popper is ready to go.

5 OPERATING INSTRUCTIONS REMEMBER: ALWAYS load your popper with oil and corn BEFORE plugging into outlet. Your machine will begin stirring as soon as it is plugged in. BE SURE that the butter bin cap is REMOVED when popping begins. This allows steam to escape and ensures light and fluffy popcorn. REPLACE CAP BEFORE UPENDING. To use your popper: 1. Remove butter bin cap if it is on. Place the recommended amounts of oil and kernels into your popper, distributing evenly over the non-stick surface. 2. Next, attach the power cord into the receptacle on the base of your popper, then plug the popper into a properly grounded outlet. 3. Attach the dome to the popper base by fitting the dome handles into the handles of the base. 4. To melt butter onto your popcorn, distribute evenly sliced cold butter pats over the butter bin so that it will drip through the holes as your popper pops. Warmer, or room temperature butter can be added after the popping begins. This will keep butter from burning on hot popper surface. Note: If you are not using butter on your popcorn you must still remove the butter bin cap before popping! 5. Attach the power cord into the receptacle on the base of your popper, then plug the popper into a properly grounded 120V outlet on a level surface. Your popper will begin stirring as soon as you plug it in. NOTE: DO NOT SHAKE OR MOVE POPPER WHILE IN USE! 6. Once popping is done, unplug from outlet and remove cord from base (See #1 in illustration below). CAUTION! POPPER WILL BE HOT! USE HOTPADS! 7. Replace butter bin cover securely (#2) before using the popper dome as a serving bowl! Once cover is in place, be sure that the dome handles are still aligned properly into the popper base handles. Grasp firmly (See #3 in illustration below) and invert AWAY from your body. When the popper is upended and resting on the butter bin cover, lift off the popper base (#4). CAUTION! Escaping steam and residual oils can drip and cause burns. 8. Salt and/or season as desired and serve (#5).

6 OPERATING INSTRUCTIONS HOW TO CLEAN & MAINTAIN YOUR POP FRENZY POPPER IMPORTANT! NO PARTS OF YOUR POPPER ARE DISHWASHER SAFE! DO NOT USE ABRASIVES OF ANY KIND ON ANY PART OF YOUR POPPER! ABRASIVE CLEANERS OR CLEANING TOOLS CAN DAMAGE NON-STICK SURFACES AND PLASTIC PARTS. ALWAYS ALLOW POPPER AND ALL PARTS TO COOL DOWN PRIOR TO CLEANING. We recommend cleaning your popper after each use. How to clean your popper: 1. Wash popper dome and butter bin cover in warm water with a mild detergent and a soft cloth. Dry thoroughly. 2. Wipe base and non-stick surfaces with a soft cloth wetted with warm water and a mild detergent. Then rinse with a soft cloth and warm water and dry thoroughly. DO NOT IMMERSE POPPER BASE! Note: After prolonged use it is normal to notice a color change in the non-stick surface of your popper. This can be removed with common household vinegar or lemon juice applied with a cloth. Wipe clean and allow to dry thoroughly. 3. Unscrew the stir rod cap and remove the stir rod. Wash in warm water with a mild detergent and a soft cloth. Dry thoroughly. Replace the stir rod onto the central turning mechanism by fitting the rod s middle notch into the groove on the mechanism. When reinstalled properly, the stir rod will lay flat and balanced and will not touch the non-stick surface. Replace stir rod cap. RECOMMENDED OIL AND POPCORN KERNEL AMOUNTS DO NOT EXCEED 1 CUP OF UNPOPPED KERNELS PER BATCH! Your popper has a maximum capacity of 6 quarts...using more than 1 cup of kernels could result in burning corn! Higher quality corn may require less oil and kernels. 1/3 Cup Popcorn Kernels + 1 Tbsp Vegetable Oil = 2 Quarts Popcorn 2/3 Cup Popcorn Kernels + 1 Tbsp Vegetable Oil = 4 Quarts Popcorn 1 Cup Popcorn Kernels + 1 Tbsp Vegetable Oil = 6 Quarts Popcorn Do not use anything other than vegetable oil, such as butter, butter substitutes, etc., as these can burn!