SERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS
|
|
- Christal Amberlynn Perkins
- 6 years ago
- Views:
Transcription
1 40 Third Street Piqua, Ohio PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /0 SELF-PRIMING CENTRIFUGAL PUMPS For Water and Other.00 S.G. Fluids WT5 Series WTA Series WT5X Series 60 HZ - PERFORMANCE AND SELECTION.00 FLUID S.G RPM Catalog Number HP TAPPINGS CAPACITY IN G.P.M. (L.P.S.) - TOTAL HEAD FEET (METERS) PHASE PHASE SUCT. DISCH. 0 (M) 5 (4.5M) 0 (6M) 5 (7.6M) 0 (.M) 5 (0.6M) 8 (.5M) AWTA* / " " 4 (.6) 40 (.5) 7 (.) (.0) 6 (.6) 7 (.0) (0.5) WTA* WTA* **Catalog number 5WT5 7WT5 0WT5 5WT5 0WT5 0WT5A **Catalog No. with strainer 5WT5X 7WT5X 0WT5X 5WT5X 0WT5X 0WT5AX HP TAPPINGS CAPACITY IN G.P.M. (L.P.S.) - TOTAL HEAD FEET (METERS) / -/ SUCT. DISCH. 0 (M) " " 55 (.4) 7 (4.5) 8 (5.) 86 (5.4) 4 (5.) 40 (8.8) 0 (6M) 4 (.0) 70 (4.4) 7 (4.) 86 (5.4) (5.8) 40 (8.8) 0 (M) 4 (.7) 66 (4.) 76 (4.7) 84 (5.) (5.8) (8.) 40 (M) 7 (.) 6 (.8) 7 (4.5) 80 (5.0) 8 (5.6) (7.5) 50 (5M) 0 (.8) 5 (.) 65 (4.) 75 (4.7) 85 (5.) (6.) 60 (8M) (.) 40 (.5) 54 (.4) 67 (4.) 78 (4.) 70 (M) 0 (0.6) 4 (.5) 40 (.5) 54 (.4) 67 (4.) 80 (4M) 0 (.) 8 (.) 50 (.) 0 (7M) 8 (.) 0 (.8) ** Catalog numbers are for units with single phase motors. For three phase, add prefix, "". Example 5WT5X. * Maximum suction lift on WTA - 7 ft. Maximum suction lift on WT5 series - 0 ft. A Crane Co. Company PUMPS & SYSTEMS
2 SECTION 4C PAGE ISSUED /0 REPLACES 4/0 40 Third Street Piqua, Ohio SELF-PRIMING CENTRIFUGAL PUMPS Compact, Close-Coupled Design Rugged Bronze-Fitted Cast Iron Construction Leakproof Mechanical Shaft Seal Non-Clogging, Bronze Semi-Open Impeller Stainless Steel Shaft Back Pull-Out Design For Easy Servicing FEATURES Available With or Without Built-In Basket Type Strainer Self-Priming, Once Case is Filled With Fluid Diaphragms, Flappers or Check Valves Are Not Required In Pump Suction Piping. But Are Recommended EVERY pump is factory tested and will meet Hydraulic Institute standards. MOTOR INFORMATION WTA Series have NEMA Jet Pump Motors. WT5 & WT5X Series have rugged Swimming Pool type motors with oversize ball/ball bearing construction. All motors have open-drip proof construction and are rated with standard NEMA Jet Pump service factors for continuous duty operation at all ratings shown. Voltages may differ from some suppliers. Consult factory. Overload Protection: All single phase motors have built-in overload protection. All three phase motors must be installed with a magnetic starter which provides full -leg protection. Failure to use correct starter and overloads will void motor warranty. All Single Phase Open Drip Proof Motors Are U.L. Recognized. RATINGS AWTA-/ HP, Single Phase, 5V, 60Hz, 500RPM, ODP, Split Phase. WTA-/ HP, Single Phase, 5/0V, 60Hz, 500RPM, ODP, Capacitor Start. WTA-/ HP, Three Phase, 0/460V, 60Hz, 500RPM, ODP WT5 & WT5X Series: Single Phase: / thru HP, 5/0V, 60HZ, 500RPM, ODP, Capacitor Start. Three Phase: / thru HP, 0/460V, 60HZ, 500RPM, ODP. MATERIALS OF CONSTRUCTION ALL BRONZE Adapter Cast Iron Case Cast Iron Impeller Bronze Diffuser Cast Iron Shaft Stainless Steel Shaft Seal Carbon-Ceramic-S. Steel-Buna-N Suction Sleeve Buna-N Strainer Gasket Buna-N Strainer Basket Stainless Steel All Plugs Brass MAXIMUM OPERATING CONDITIONS TEMPERATURE 5 F (07 C) (For Standard Buna-N Seal) INLET PRESSURE (WT & WT5) 00 PSI (60kpa) INLET PRESSURE (WT5X) 5 PSI (0kpa) CASING WORKING PRESSURE (WT & WT5) 65 PSI (7kpa) CASING WORKING PRESSURE (WT5X) 60 PSI (4kpa) PUMPS & SYSTEMS A Crane Co. Company
3 40 Third Street Piqua, Ohio DIMENSIONS SECTION 4C PAGE ISSUED /0 REPLACES /0 SERIES WTA CATALOG AWTA WTA WTA DIMENSIONS IN INCHES SINGLE PHASE THREE PHASE 5 5 / 7 7 /8 8 /8 5 / 8 /8 DIMENSIONS IN MILLIMETERS CATALOG SINGLE PHASE THREE PHASE AWTA WTA WTA 8 00 All models have " NPT suction and discharge. SERIES WT5 CATALOG 5WT5 7WT5 0WT5 5WT5 0WT5 0WT5A DIMENSIONS IN INCHES SINGLE PHASE THREE PHASE 5 7 /8 6 7 /8 7 / /8 0 /8 0 /8 0 /8 5 5 /8 6 7 /8 6 7 /8 6 7 /8 7 /4 7 /4 7 /4 /8 /8 DIMENSIONS IN MILLIMETERS CATALOG SINGLE PHASE THREE PHASE 5WT5 7WT5 0WT5 5WT5 0WT5 0WT5A All models have " NPT suction and discharge. SERIES WT5X CATALOG 5WT5X 7WT5X 0WT5X 5WT5X 0WT5X 0WT5AX DIMENSIONS IN INCHES SINGLE PHASE THREE PHASE 0 /4 /4 /8 7 /8 7 /8 7 /8 8 /8 0 /8 0 /8 0 /8 0 / /4 /4 /4 /8 /8 7 /4 /8 /8 DIMENSIONS IN MILLIMETERS CATALOG SINGLE PHASE THREE PHASE 5WT5X 7WT5X 0WT5X 5WT5X 0WT5X 0WT5AX DO NOT USE FOR CONSTRUCTION PURPOSES. CERTIFIED DRAWINGS AVAILABLE ON REQUEST All models have " NPT suction and discharge A Crane Co. Company PUMPS & SYSTEMS
4 CSPP-66 - MOTORS RPM & HP PHASE FOR WT5X & WPT5X (Std) SERIES - OPEN DRIP PROOF 500 RPM Single Phase (ODP) 500 RPM Three Phase (ODP) / -/ / -/ FOR WST5X (Std) SERIES - EXPLOSION PROOF 500 RPM Single Phase (XP) 500 RPM Three Phase (XP) / -/ / -/ NOTE: Impeller must extend from face of frame as follows: Pumps with 0405 Diffuser - /64" Diffuser - /" 0406 Diffuser - 5/64" Shim washers (Symbol 0) may be added or removed as required to obtain dimensions. SERIES: WT5X, WPT5X, WST5X SELF-PRIMING CENTRIFUGAL PUMPS File: WT5X.dwg
5 SYMBOL QUANTITY DESCRIPTION SYMBOL QUANTITY DESCRIPTION * C A A- 040-A A- 040-A 0408-A 0407-A 040-A A A- 040-A A 0408-A 040-A A A- 040-A- 040-A 0408-A Slinger Washer Mechanical Seal -Buna N - WT5X & WST5X (Std) Mechanical Seal -Viton - WPT5X (Std) Mechanical Seal- EPT + Cap Screw /8 x " Lg FOR SERIES WT5X, & PHASE Impeller - 5WT5X Impeller - 7WT5X Impeller - 0WT5X Impeller - 5WT5X Impeller - 0WT5X Impeller - 0WT5AX FOR SERIES WPT5X, & PHASE Impeller - 5WPT5X Impeller - 7WPT5X Impeller - 0WPT5X Impeller - 5WPT5X Impeller - 0WPT5X Impeller - 0WPT5AX Impeller - 0WPT5AX FOR SERIES WST5X, & PHASE Impeller - X5WST5X Impeller - X7WST5X Impeller - X0WST5X Impeller - X5WST5X Impeller - X0WST5X Impeller - X0WST5AX 4 Cap Screw /8 x -/4 Impeller Lock Nut A A As Req. As Req. As Req. Pin Diffuser - ALL IRON S 0WT5AX & 0WT5AX 0WPT5AX & 0WPT5AX X0WST5AX & X0WST5AX Diffuser - 5WPT5X & 5WPT5X Diffuser - All Except Above Suction Sleeve - Buna N - WT5X & WST5X (Std) Suction Sleeve - Viton - WPT5X (Std) Suction Sleeve - EPT + Gasket, Buna N - WT5X & WST5X Gasket, Viton - WPT5X Plug, /4-8 NPT Knob Assy Strainer, Basket Cover, Strainer Case Adapter - 0WT5AX & 0WT5AX 5WPT5X & 5WPT5X 0WPT5AX & 0WPT5AX X0WST5AX & X0WST5AX Adapter - All except Above Washer, /6-7WPT5X & 7WPT5X Washer,.0" Washer,.00" Washer,.005" Impeller (Omit Letter A) Plug ** Flat Gasket O-Ring Gasket - Buna N - WT5X & WST5X (Std) O-Ring Gasket - Viton - WPT5X (Std) O-Ring Gasket - EPT + O-Ring Gasket -Teflon CSPP-67 SERIES: WT5X, WPT5X, WST5X SELF-PRIMING CENTRIFUGAL PUMPS * Series WT5X, WPT5X & WST5X pumps have been manufactured with either cast iron or bronze impellers as standard. All replacement impellers will be bronze as listed, unless iron is specified. For iron impellers, omit the letter "A" from part number. EXAMPLE: ** Series WT5X, WPT5X & WST5X pumps have been manufactured with either a flat or O-ring type gasket. Determine which type is required before ordering. When in doubt, order flat gasket. + For hot water or caustic service.
6 For technical advice or service please take your pump into your local pump service center. To order pump or parts or for pricing please go to the following links : Burks Pumps Home >> Burks Pumps stock list >>
SERIES: WPT SELF-PRIMING CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WPT SECTION 4C PAGE 5 ISSUED /0 REPLACES /0 SELF-PRIMING CENTRIFUGAL PUMPS For Perchlorethylene
More informationSERIES: WT SELF-PRIMING CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 45356-0603 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WT SECTION 4C PAGE ISSUED /04 REPLACES /03 SELF-PRIMING CENTRIFUGAL PUMPS For Water and
More informationSERIES: WPT SELF-PRIMING CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: WPT SECTION 4C PAGE 5 ISSUED /0 REPLACES /0 SELF-PRIMING CENTRIFUGAL PUMPS For Perchlorethylene
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
0 Third Street Piqua, Ohio 6-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G--/ G6--/ SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM - 60Hz.
More informationFLANGE-MOUNT CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES GV6 SECTION E PAGE ISSUED /0 REPLACES /0 FLANGE-MOUNT CENTRIFUGAL PUMPS Idel for OEM applications
More informationSERIES ES BASE MOUNTED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES ES PAGE BASE MOUNTED TURBINE PUMPS ES - 75 RPM - 60Hz. ES - 350 RPM - 60Hz. (See Individual curves for symbol number) ES - 900 RPM - 50Hz. (See Individual
More information5. CONDENSATE PUMPS/UNITS
INDEX Condensate Systems/Pumps GENERAL INFORMATION BURKS PARTS I&O MANUALS. CONDENSATE PUMPS/UNITS PUMP TYPES: GV GV6 USA: (937) 778-8947 Canada: (90) 47-6223 International: (937) 61-398 A 7/1 Condensate
More informationJ SERIES. Technical Specifications. Centrifugal Pumps for J Series Condensate & Boiler Feed Pumps. Features
Steam Traps Condensate Boiler Feed Valves Strainers Pumps J SERIES Centrifugal Pumps for J Series Condensate & Boiler Feed Pumps Technical Specifications The Sterlco J Series Centrifugal Pumps are designed
More informationPOULTRY MARKET CATALOG
POULTRY MARKET CATALOG FW0134 0518 Supersedes 0714 Evaporative Cooling Pumps: 1-1/2 or 2 in. discharge Centrifugal Booster Pumps Pressure Booster Pumps Engineered Poultry Pumping Systems One year limited
More informationSTAINLESS STEEL UNITS
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More information3020/3120 Series DEMING PUMPS. Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet
3020/3120 Series Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet A Crane Co. Company DEMING PUMPS Introducting Deming 3020/3120 Series End-Suction
More informationModel 6050-Series. PumpAgents.com - buy pumps and parts online SELF-PRIMING PUMPS. Model 6050-Series
PumpAgents.com - Click here for Pricing/Ordering Model 6050-Series SELF-PRIMING PUMPS FEATURES Body: Impeller: Shaft: Wearplate: Shaft Seal: Ports: Motor: Weight: Bronze Construction JABSCO Nitrile 316
More information489 & 490 Series CAST IRON UNITS BRONZE UNITS STAINLESS STEEL UNITS MAINTENANCE. Figure 1 - Mechanical Seal Replacement
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationVent-Rite. Cast Iron And Steel Receivers. Simplex, Duplex, Triplex And Quadruplex Units. Pump Capacities To 150 GPM. Discharge Pressure To 75 PSI
Vent-Rite BULLETIN VCRV AUGUST 0 GUARDIAN Plus Cast Iron And Steel Receivers Simplex, Duplex, Triplex And Quadruplex Units Pump Capacities To 0 GPM Discharge Pressure To 7 PSI 87 Dewey Avenue Benton Harbor,
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationDUPLEX CONDENSATE TANK SYSTEM
DUPLEX CONDENSATE TANK SYSTEM PROJECT NAME: 7 EAST 54TH STREET CONTRACTOR: PRO PUMP CORP ENGINEER: KEVAN WOODWORTH SUBMITTED BY: NISSIM ISAACSON DATE: 2.20.205 DESIGN DATA Model GPM TDH HP Volt Phase RPM
More informationDNJ SERIES PUMPS END SUCTION CLOSE COUPLED
DNJ SERIES PUMPS END SUCTION CLOSE COUPLED DNJ SERIES PUMPS These are close coupled with standard JM solids shaft ball bearing motors specially designed for pump applications in accordance with standards
More informationSpecifications Information and Repair Parts Manual 316A-95, 316B-95, 393A-95, 393B A-95 thru 394D-95, 399A-95
Specifications Information and Repair Parts Manual 316A-95, 316B-95, 393A-95, 393B-95 394A-95 thru 394D-95, 399A-95 Please read and save this Repair Parts Manual. Read this manual and the General Operating
More informationKGP(X) Grinder Pumps HP Grinder Pump, 3 Phase (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve.
Grinder Pumps KGP(X) 7.5-15HP Grinder Pump, 3 Phase (Class 1, Div. 1, Groups C & D Hazardous Location) (PENDING) The KEEN PUMP KGP(X) series centrifugal grinder pumps are designed for municipal, commercial
More informationA. Operation and Maintenance Data: For pumps to include in emergency, operation, and maintenance manuals.
SECTION 23 21 23 - HYDRONIC PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationFull-line Product Overview
Full-line Product Overview End Suction Centrifugal Pumps This general purpose pump can be configured in frame-mounted and close-coupled, semi-open and enclosed impeller configurations. They are available
More informationB. HI Compliance: Design, manufacture, and install pumps in accordance with HI "Hydraulic Institute Standards."
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationOWNERS GUIDE TO INSTALLATION AND OPERATION END SUCTION CENTRIFUGAL PUMPS
OWNERS GUIDE TO INSTALLATION AND OPERATION END SUCTION CENTRIFUGAL PUMPS IL00 Figure - CJ0, EL0 Series IL0 Figure - CJ0, EL0 Series Drain Plug READ THESE INSTRUCTIONS CAREFULLY Read these installation
More informationD. NEMA Compliance: Provide electric motors and components which comply with NEMA standards.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationMODEL 652A MODEL 654A MODEL 652A MODEL 653A MODEL 651A AURORA. 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS
MODEL 652A MODEL 654A MODEL 652A MODEL 651A MODEL 653A AURORA 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS WWW.AURORAPUMP.COM 2 AURORA 650 Series Single Stage Solids Handling Pumps Capacities to 2000
More informationSeries SR Compact Centrifugal Mag-Drive Pumps. WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec
WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec Series SR Compact Centrifugal Mag-Drive Pumps Providing environmentally safe sealless, magnetic pumps of the highest quality for over 30
More informationWilo IL Vertical Split-Coupled Inline Pumps
Wilo IL Vertical Split-Coupled Inline Pumps Vertical Inline Split-Coupled, Single Stage Pumps March, 2013 Marcos D. Roimicher, Product Manager BS Market Segment, Product Management Department 120-08-002-0313
More informationA. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 "Building Services Piping.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationDESCRIPTION MAINTENANCE INSTALLATION OF NEW SEAL REMOVAL OF OLD SHAFT SEAL
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationGH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM
GH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM The GH Series The GH is Carver s horizontal, end suction pump series for handling water, oils, and chemicals in marine, process, and general
More informationHoffman Specialty Pump Products
Condensate Units Boiler Feed Units Vacuum Heating Units Hoffman Specialty Pump Products S-0692C INDEX Condensate Return Units Series WC Series WCS Series SCC Boiler Feed Units Stock Watchman Condensate
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More information489G DESCRIPTION CAST IRON UNITS BRONZE UNITS 316 STAINLESS STEEL UNITS. Maintenance. General Safety Information for 12 Volt DC Power
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More information4VH and 4VHX. 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction
4VH and 4VHX 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction DURABLE MOTOR WILL DELIVER MANY YEARS OF RELIABLE SERVICE Oil-filled motor for maximum heat dissipation
More informationMARLOW PUMPS RECIRCULATION
End suction centrifugal pump line available in both close coupled and frame mounted configurations allow users to meet exactly most flow conditions on commercial pool and waterpark applications. Features
More informationEnd-Suction Centrifugal Pump
GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM
More informationEnd-Suction Centrifugal Pump
GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM
More informationKEENER GRINDER PUMPS
KEENER GRINDER PUMPS RDSGP1-2021-50Hz 2 HP Grinder Pump Replacement Grinder Pump Direct Interchangeability Double Mechanical Seal Silicon Carbide (Main) - Grit Resistant Carbon Ceramic (Secondary) Dual
More informationSECTION PLUMBING EQUIPMENT Piping (Plumbing). 2. Division 16 - Electrical Wiring and Connections.
SECTION 15450 PLUMBING EQUIPMENT PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15410 - Piping (Plumbing). 2. Division 16 - Electrical Wiring and Connections. 1.02 SUBMITTALS A. Submit properly identified
More informationCommercial, Residential & Institutional Pumps, Tanks, & Accessories
Taco International Commercial, Residential & Institutional Pumps, Tanks, & Accessories Taco Catalog # : 300-6.0 Supersedes: 300-3.5 9/11/06 Effective Date: 03/21/07 Printed in USA Pumps FI Frame Mounted
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationMECHANICAL SEAL REPLACEMENT UNPACKING MAINTENANCE. Figure 1 & 2 - Mechanical Seal Replacement
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationSERIES 1600 Quality Design Features Assure Long, Trouble-Free Service
Vortex End Suction SERIES 1600 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Food Processing Solids Waste Water Treatment Pollution Control Slurries Industrial Process
More informationTECHNICAL. Series 18. Pump Packages
TECHNICAL S Y S T E M S Series 18 Pump Packages Series 18 Pump Packages Standard Features Close-coupled, end-suction, centrifugal pumps Mounted and wired pump starters Hand-Off-Auto switch for each pump
More informationMODEL 664A MODEL 662A MODEL 663A MODEL 661A AURORA. 660 Series SINGLE STAGE SOLIDS HANDLING VORTEX PUMPS
MODEL 662A MODEL 664A MODEL 661A MODEL 663A AURORA 660 Series SINGLE STAGE SOLIDS HANDLING VORTEX PUMPS WWW.AURORAPUMP.COM 2 AURORA 660 Series Single Stage Solids Handling Vortex Pumps Capacities to 2600
More informationOWNERS GUIDE TO INSTALLATION AND OPERATION
OWNERS GUIDE TO INSTALLATION AND OPERATION SPM SERIES HIGH POWER CENTRIFUGALS READ THESE INSTRUCTIONS CAREFULLY Read these installation instructions in detail before installing your pump. Be sure to check
More informationMachine Tool Coolant Units
Machine Tool Coolant Units Drill presses, tool grinders, tapping machines, cut-off saws, bench mills, lathes /5 HP fan-cooled motor Vertical machine coolant VMC- Capacity: GPH @ ' 9 LPH @. m Liquid Temperature:
More information.2 Section Waste Management and Disposal..5 Section Motors, Drives and Guards for Mechanical Systems.
Issued 2006/08/01 Section 15131 Pumps Hydronic Systems Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal.3 Section 01780
More informationIntelligent Variable Speed Pump
IntelliFlo VS+SVRS Intelligent Variable Speed Pump The ONLY way to comply with new federal anti-body entrapment standards and save money There s simply no better way to add a Safety Vacuum Release System
More informationReliable Long-Term Solutions For Your Toughest Pump
Reliable Long-Term Solutions For Your Toughest Pump Municipal Raw Sewage Grit Handling Sludge Recirculation Digester Cleaning Thickened Sludge Storm Water Sump Pump (Pipe Gallery) Head Works Industrial
More informationDean Pump High Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump High Temperature Chemical Process Inline Pumps Series DL Dean Pump Series DL High Temperature Chemical Process Inline Pumps Capacities to 600 GPM (182 m 3 /hr) Heads to 0 feet
More informationMECHANICAL SEAL REPLACEMENT UNPACKING MAINTENANCE. Figure 1 & 2 - Mechanical Seal Replacement
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationVSA SEWAGE PUMP. Capacities to 1600 gpm, Heads to 120, Horsepower range 3/4 thru 40, 3 thru 6 discharge, 1750 and 1150 operation.
Brochure# 228E 122011 TYPE VSA SEWAGE PUMP Capacities to 100 gpm, Heads to 120, Horsepower range 3/ thru 0, 3 thru discharge, 1750 and 1150 operation. HIGHLIGHTS Wet-Pit Installations Pumps Suspend From
More informationElectric Pumps. Introduction. W4100, W4200 & W4300 Condensate Pumps. Typical Condensate Pump Features
Electric Pumps Introduction W4100, W4200 & W4300 Condensate Pumps Watson McDaniel s Condensate Return and Boiler Feed Pumps are equipped with Cast Iron bodies and Bronze Impellers. The pump receiver tanks
More informationIndustrial. Solutions brands you trust. Product Overview
Industrial Solutions brands you trust. Product Overview Industrial Pump Applications Crane & Systems design s the most efficient and economical pumps to serve the large diversity of industrial applications
More informationModels Series Series
Models 31800-Series 31801-Series INDUSTRIAL DIAPHRAGM PUMPS 4 GPM/15 LPM FEATURES Self-Priming Easy Installation Can run dry without damage Low Amp Draw Flow to 4 GPM/15 LPM Compact Size Thermal Overload
More information1 1/8 Inch Centrifugal Pump Operation and Maintenance Guide
1 1/8 Inch Centrifugal Pump Operation and Maintenance Guide Installation Location! The pump should be located as close as possible to the liquid source so that the suction line can be as short and direct
More informationThe Replacement Motor & Fan Specialists
The Replacement Motor & Fan Specialists Residential Commercial Electric Motors Fans & Blowers Hydronic Pumps Accessories www.soperssupply.com Industrial Soper s Supply Ltd. Proud Distributor of the Following
More informationSECTION STEAM CONDENSATE PUMPS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 23 22 23 STEAM CONDENSATE PUMPS SPEC WRITER NOTES: 1. Delete between // ---- // if not applicable to project. Also delete any other item or paragraph not applicable
More informationTitle: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: HVAC Standards
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationSECTION STEAM CONDENSATE PUMPS
SECTION 23 22 23 - STEAM CONDENSATE PUMPS PART I - GENERAL 1.1 SECTION INCLUDES A. Steam Condensate Return Units, Gravity Return Type 1. Receiver 2. Pumps 3. Control Panel 4. Accessories Note to PSC: Although
More informationSMF PUMP OWNER S MANUAL
SMF PUMP OWNER S MANUAL IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING: Before installing this product, read and follow all warning notices and instructions
More informationPENGUIN SERIES HSC PUMPS INTRODUCTION
PENGUIN Installation & Maintenance SERIES HSC PUMPS MODELS HSC-1/4 HSC-1/2 HSC-3/4 HSC-1 HSC-2 HSC-3 SEALS S - Single D - Double M - Single/Multi-Stage INTRODUCTION Penguin 316 stainless steel centrifugal
More informationSECTION FIRE PUMP AND CONTROLS
SECTION 15320 FIRE PUMP AND CONTROLS PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Fire pump, jockey pump, and controls including necessary accessories as shown in Construction Documents, specified
More informationK4RH(X) Solids-Handling Pumps
Solids-Handling Pumps K4RH(X) 4 Submersible, Recessed Impeller (Class 1, Div. 1, Groups C & D Hazardous Location) RECESSED IMPELLER Handles Stringy and Fibrous Materials Passes Large Solids Pumps Heavier
More informationCondensate Boiler Feed Water Make-Up
1144 Utica Ave, Brooklyn, NY 1103 July 0 New Catalogue Release Bulletin 9C.01 Low Inlet Condensate Receiver (7 from floor) Close Grained Cast Iron Simplex and Duplex Design To 0,000 SQ-Ft EDR Pump Capacity
More informationCAST IRON IMPELLER B4JRMBH. TYPE B SINGLE STAGE CENTRIFUGAL PUMP Bearing Frame Mount TABLE I
Page 90. Date January, 004 Supersedes //95 B4JRMBH Packing Construction 3 9 3 8 Volute Impeller B/M No. Rotation Case Impeller Diameter B3 CW H03843 L059 3.50 B33 CCW H03848 L0594 3.50 8 00 095 3 See Supplement
More informationSeries P. Installation & Maintenance. Materials: A - CPVC B - Polypropylene C - PVDF
Series P Installation & Maintenance Models: P-/5 P-/6 P-/4 P-/ P-/-HP P-3/4 P-3/4HP P- P- / P- P-3 P-5 P-7 / Materials: A - CPVC B - Polypropylene C - PVDF Introduction Penguin Pumps are designed to handle
More informationFamily Curve. Submersible Grinder Pumps 1¼" and 2" Discharge. Effluent/Grinder Pumps.
Family Curve Submersible Grinder Pumps 1¼" and 2" Discharge 7 11/0 Submersible Vortex Grinder Pumps SGV, 2HP, Double Seal, Oil-Filled Word File FILE: SPEC4 SCOPE: Furnish and install submersible grinder
More informationSUMP PUMPS, EFFLUENT PUMPS AND SEWAGE PUMPS
SUMP PUMPS, EFFLUENT PUMPS AND SEWAGE PUMPS FW19 17 Supersedes 11 FOR WATER REMOVAL vortex impeller on submersible models SE Premium vertical switch Thermal overload protected Cast iron or thermoplastic
More informationPhiloWilke Partnership Addendum No. 2 A/E Project No April 2016
SECTION 23 21 23 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions and Division 01 Specification Sections, apply to this Section.
More informationLINE OVERVIEW CATALOG
LINE OVERVIEW ATALOG FW53 118 Supersedes 715 Trust runs deep Submersible Pumps Submersible Pump Motors Variable Frequency Drives Jet Pumps entrifugal Pumps Booster Pumps Specialty Pumps Sump/Sewage Pumps
More informationC. ASSE 1013: Performance Requirements for Reduced Pressure Principle Backflow Preventers.
SECTION 22 10 00 PLUMBING PIPING AND PUMPS PART 1 - GENERAL 1.1 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design.
More informationItem No. Name of Part Material of Construction 1 * 2 11 * * 65
Assembly Parts Type ACV & AEV Vertical Mounted Unipumps with - Bulletin - 120 Pump end with 2 HP and smaller motor at 3500 RPM or 1 HP and smaller at 1750 RPM. Item No. Name of Part Material of Construction
More informationLC Series - Light Commercial Pump Station Installation and Operation Manual
LC Series - Light Commercial Pump Station Installation and Operation Manual Please keep this manual with the pump station Content Rain Bird LC Series Overview... Safety Instruction... Operation... 3 Pump
More informationUpompe Primeflo XP7 chemical self-priming centrifugal pumps
Upompe Primeflo XP7 chemical self-priming centrifugal pumps 1 Design Introduction: These Upompe Primeflo XP7 self-priming pump are heavy-duty design for rugged application and constructed to handle corrosive,
More informationFM 517 San Leon, TX Toll Free: Office: (281) Fax: (281)
www.rbmosherco.com 5902 FM 517 San Leon, TX 77539 Toll Free: 1-800-444-2207 Office: (281) 339-3382 Fax: (281) 559-1152 E-mail: sales@rbmosherco.com R.B. MOSHER CO. has been in business since 1986, providing
More informationModels Series Series
Models 3180-Series 3181-Series INDUSTRIAL DIAPHRAGM PUMPS Commercial Duty, 3 GPM/1 LPM FEATURES Sealless Easy Installation Run Dry Ability Flow to 3 GPM/1 LPM Self-Priming Low Amp Draw Thermal Overload
More informationECONO FLO 2.7HP VARIABLE SPEED PUMP OWNER S MANUAL
ECONO FLO 2.7HP VARIABLE SPEED PUMP OWNER S MANUAL IMPORTANT SAFETY INSTRUCTIONS READ AND FOLLOW ALL INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING: Before installing this product, read and follow all warning
More informationDomestic. Pump Series CB and CBE Condensate Units SINGLE OR DUPLEX 1,000 THRU 140,000 SQ. FT. EDR-250 THRU 34,748 LB./HR.
Cast Iron Receivers: For years of dependable service; warranted for 20 years from date of shipment against failure due to corrosion. Each Receiver comes standard with Inlet connection, an overflow and
More informationPenguin. Series P. Vertical Pump
Series P Flows from 9 to 7 Pressure to 66 Ft. Penguin Vertical Pump Features: Choice of CPVC, PVDF, or Polypropylene Runs Dry Without Damage Self-Priming When Immersed No Metal Contact Chemical Resistant
More informationGRUNDFOS PLUMBING & HVAC PRODUCTS
GRUNDFOS PLUMBING & HVAC PRODUCTS SERIES UP CIRCULATORS GRUNDFOS CIRCULATORS FOR HEATING AND HOT WATER RECIRCULATION Quiet, maintenance-free performance Stainless steel construction, corrosion resistant
More informationGoulds Trash Hog. Self-Priming Solids Handling Pumps
Goulds Trash Hog Self-Priming Solids Handling Pumps Goulds Trash Hog Self-Priming Pumps Designed for Toughest Solids Handling Services Capacities to 6000 GPM (1363 m 3 /h) Heads to 140 feet (43 m) Temperatures
More informationNM952 SERVICE PARTS TABLE OF CONTENTS. Cabinet Air Cooled Refrigeration Water Cooled Refrigeration Water System Gearmotor...
This parts list contains the service parts and wiring diagrams for this model. Check the model number in question to be sure that it is applicable to this parts list. NM9 SERVICE PARTS TABLE OF CONTENTS
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS Catalog More Than 60 Years Developing The Pumping Technology That Drives Progress Engineering Excellence Ruhrpumpen is an innovative
More informationDomestic Pump Series VCMD TM Combination Vacuum & Boiler Feed Unit
Custom engineered units to maintain optimum boiler levels and system vacuum requirements Four styles to choose from to minimize floor space requirements Multi-jet vacuum pumps for quiet, dependable and
More information1900 Series In-Line Pump
Water Circulation Pumps & Circulators 1900 Series In-Line Pump HYDRONIC COMPONENTS & SYSTEMS Taco Catalog #: 300-1.4 Supersedes: 300-1.4 Dated: 06/15/95 Effective Date: 03/15/05 Printed in USA 2. Features
More information316 Stainless Steel Close- Coupled Self-Priming Flexible Impeller Pumps
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationFEATURES. Other Fed-Flush Arrangements
Brochure # 0710 TYPE TYPE... VSAF SEWAGE EJECTOR SYSTEM Flows to 600 gpm, Heads to 120, 1 thru 40 HP. Discharge size 4, 1750 and 1150 RPM, strainer in discharge pipe. HIGHLIGHTS Installations where rags
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y Standard Pumps Manufacturing Plants Today Ruhrpumpen is a worldwide company, with a network of global manufacturing plants in different countries and
More informationAmerica s Most Versatile Line of Centrifugal Pumps
America s Most Versatile Line of Centrifugal Pumps OEM Development Price Pump Co. has a storied history of developing products specific to the requirements of many original equipment manufacturers in industry
More informationPHYSICAL FACILITIES Consultant s Handbook Specifications Division 21 Fire Suppression 3000 Fire Pumps
Note: The A/E must choose all design values in brackets below before using in project specifications 1 General 1.1 Provide UL listed and FM approved fire pump complete with pump, driver, controller and
More informationK4RB(X) 4 Submersible, Recessed Impeller (Class 1, Div. 1, Groups C & D Hazardous Location)
Solids-Handling Pumps K4RB(X) 4 Submersible, Recessed Impeller (Class 1, Div. 1, Groups C & D Hazardous Location) HIGH OPERATING PRESSURES Up to 275 Total Dynamic Head Strong Pumping Capacities to 1400
More informationTIDALWAVE I/G POOL PUMP INSTRUCTION MANUAL
TIDALWAVE I/G POOL PUMP INSTRUCTION MANUAL READ THIS MANUAL CAREFULLY BEFORE USING YOUR PUMP 88 PUMP PARTS BREAKDOWN REF # Order # Mfr # Description 1 NEP4 AC 348 Lid Knobs NEP AC 380 Strainer Lid 3 NEP6
More informationReferences are in agreement with UMRL dated April 2018 **************************************************************************
USACE / NAVFAC / AFCEC / NASA UFGS-23 21 23 (August 2017) ---------------------------- Preparing Activity: USACE Superseding UFGS-43 21 13 (January 2008) UFGS-43 21 39 (April 2008)) UNIFIED FACILITIES
More informationREF. NO Clamp Assembly 8 1 set Gasket (4 per set) S.S. Lock-washer 3/8 x 1/ Brass Impeller 3.
4.4 SUPPLY PUMPAK ASSEMBLY NOTE: This section applies only to systems, which include a supply pumpak. Only the H6, XA, and XC series systems contain a supply pumpak. If your system is a single zone, H6
More informationFamily Curve. Submersible Grinder Pumps 1¼" and 3" Discharge. Effluent/Grinder Pumps.
Family Curve Submersible Grinder Pumps 1¼" and " Discharge 7 12/18 Specifications Submersible Vortex Grinder Pumps SGV, 2HP, Double Seal, Oil-Filled FILE: SPEC4 SCOPE: Furnish and install submersible grinder
More informationUpdate In Progress. Division 23 Heating, Ventilation, and Air Conditioning Page Section FLUID SYSTEMS EQUIPMENT PART 1 GENERAL
Section 23 20 00 FLUID SYSTEMS EQUIPMENT PART 1 GENERAL 1. CHILLERS Page 23 20 00-1 A. Provide chiller packages with centrifugal compressors, or screw compressors, and water cooled condensers. B. Design
More information470 Series Stamped Stainless Steel Pumps
470 Series Stamped Stainless Steel Pumps Flows to: 1100 GPM Heads to: 2000 Feet 130 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in America, are pump products steeped
More informationMAGNETIC DRIVE PUMPS AMERICA S MOST VERSATILE LINE OF CENTRIFUGAL PUMPS THINK QUALITY...THINK DELIVERY...THINK PRICE
MAGNETIC DRIVE PUMPS AMERICA S MOST VERSATILE LINE OF CENTRIFUGAL PUMPS THINK QUALITY...THINK DELIVERY...THINK PRICE Seal-less Design Price Pump magnetically driven, seal-less pumps provide a leak-proof
More information