ENGLISH VERSION Catalogue. All your heating and hot water solutions with high energy savings FRENCH MANUFACTURER

Transcription

1 ENGLISH VERSION Catalogue All your heating and hot water solutions with high energy savings FRENCH MANUFACTURER

2 CONTENT 2 GAS RADIATORS DULCIS/MV ARÉNAL The new gas fireplace HYDRAULIC MODULES REMBRANDT Cast iron, floor standing fuel condensing boiler p.29 p.26 p.24 GIALIX Electric, modulating wall-hung boiler p.30 p.22 solution for you to ensure your comfort and well-being. AUER has been on the cutting edge of research and innovation for over 120 years. We offer a wide variety of heating and domestic hot water solutions for domestic, community and tertiary installations. Thanks to our multienergy solutions (gas, oil, renewable energies), AUER can provide the right At AUER, we are dedicated to producing high-quality products which save energy, are easy to install and user-friendly. We pride ourselves on our strong ecological approach and our products all meet the requirements of the most recent European and French heating regulations. All AUER products are designed, developed and manufactured at our plant in northern France. This unique concentration of skills and craftsmanship showcases our savoir-faire. Our marketing team will ensure that there is always someone on hand to provide you with all the information you need about AUER products. p.20 p.4 p.18 p.6 p.12 HRC 70 Heat Pump LÉLIA Wall-hung or floor standing Gas condensing boiler EDEL Heat pump water heaters COMMERCIAL SOLUTIONS PULSATOIRE Gas condensing boiler with pulse reactor Auer: a long history of innovation for comfort A center for research and innovation An automatised production in our factory extension dedicated to water heat pump manufacturing Here, products are designed, developped and tested. Over 1000m2 of research laboratory equiped with climatic test facilities. We test our products under multiple real operating conditions. We thereby guarantee the high performance and optimized efficiency of each of our products An automatised production

3 HRC C HIGH TEMPERATURE MODULATING HEAT PUMP AN HRC 70 PILOT FOR EACH CONFIGURATION from 7 to 140 kw Heating guaranteed, even in extreme cold 100% heat pump DOWN TO -20 C HFC FREE R290 up to A ++ DS150 PILOT for HRC 70 7 to 17 kw with 150L sanitary hot water tank XS PILOT for HRC 70 7 to 11 kw HRC 70 7 or 11 kw PREMIUM PILOT for HRC 70 7 to 25 kw XS Pilot PILOT for HRC kw HIGH PERFORMANCE A genuine high-temperature heat pump which provides heating up to 70 C even on extremely cold days. Modulating power: guaranteeing excellent seasonal performances. Equipped with a multifunctional hydraulic pilot for turnkey installation. Extremely quiet thanks to the low-speed fan Runs using only the heat pump until the outdoor air temperature drops to - 20 C. THE RESULT : For 1 kwh of electricity, up to 4.5 kwh of heat goes back into the heating circuit Wide range for domestic use: - 7 and 11 kw - 17, 20 and 25 kw - 35 kw ECO-FRIENDLY AND ECONOMICAL Energy category: A++ EVEN MORE ECO-FRIENDLY equivalent potential in tonnes.. Heating water up to 70 C Eco-friendly refrigerant which is not subject to a mandatory annual maintenance check The HRC 70 uses a very low quantity of refrigerant which is not a fluorinated gas. The result: the potential equivalent of 10 tons of CO 2 is avoided. The Pilot provides smart decoupling of the water flow in each circuit, making your installation safer and more reliable. It degasses, decants and desludges your installation It enables you to control 2 heating circuits. It is equipped with 0-6 kw electrical back-up It controls a back-up boiler High temperature circuit - high temperature radiators Low temperature circuit - underfloor heating - low temperature radiators - fan radiators In existing or new building - individual houses HRC 70 7 to 17 kw HRC 70 7 to 25 kw DS Pilot ECS EFS Premium pilot 60 L buffer underfloor radiators radiators HRC 70 RANGE HP HP Energy efficiency A++ HRC kw Pilot for 35 kw 200 L buffer radiators 7 & 11 kw 17, 20 & 25 kw 35 kw 50 & 70 kw 100 kw 140 kw 4 5

4 Edel AIR FLOOR STANDING MODEL THE REVOLUTIONARY HEAT PUMP WATER HEATER 200 and 270 L Naturally economical hot water A + CATEGORY A+ A 3000 LITTLE ENVIRONMENTAL IMPACT A great advantage for the environment: the Edel contains no greenhouse effect gases High performance compressor Reinforced airtightness Stainless steel tank: no anode The most eco-friendly solution Equivalent CO2 emissions over 15 years (kg) 2787, Up to 10 times less CO2 emissions USES UP TO 5 TIMES LESS ENERGY THAN AN ELECTRIC WATER HEATER Annual electricity consumption for DHW production kwh* AN INNOVATIVE DESIGN Optimum heating for your water thanks to the patented ehd high performance heat exchanger OUTSTANDING COP 3.2 EN standard EXCLUSIVE: all STAINLESS STEEL DWHP currently on market Gas condensing boiler Edel 200 COMPACT AND USER FRIENDLY ADVANTAGES FOR INSTALLERS Electric water heater Air inlet and outlet nozzles that can be rotated through 360 Easy to transport in a van (the Edel 200 is 1.43m high only) DWHP currently on market *Example using a 100m 2 house. Gas condensing boiler Electric water heater 360 Edel 200 Patented ehd heat exchanger An aluminium heat exchanger with mini channels that maintains perfect contact with the tank for highly efficient heat transfer. BACK-LIT SMART CONTROLS Highly efficient compressor Reinforced airtightness Stainless steel tank : no anode Variable fan speed Up to 80 % free energy extracted from the air to heat your domestic water Variable fan speed to fit in with any installation configuration Choose your mode according to your needs: BOOST, COMFORT, ECO or HOLIDAY Automatic heating time function Integrated 'day/night' contact for operating on off-peak time. piping on the left PV READY piping on the right piping at the rear IDEAL DIMENSIONS: only 1.4 3m high only Compact 630 mm diametre Low height: 1.43 m (200 L) 1.69 m (270 L) Unique Delivered in a strong and user-friendly transport bag Outdoor air installation 6 7

5 Edel AIR WALL HUNG MODEL THE REVOLUTIONARY HEAT PUMP WATER HEATER UNIQUE AND USER FRIENDLY With patented-technology insulated concentric air ducts Several connection options from 80 to150 L A mm 80 mm Air inlet Air outlet OUTDOOR AIR - Horizontal air duct - Vertical air duct AMBIENT AIR - Unheated premises - Non-heated premises with outdoor air exhaust 150 L 120 L EFFICIENT The Edel is classed in the highest energy-saving category: It is the best solution for new builds and renovation projects The Edel provides domestic hot water and maintains it at 60 C using only the heat pump, right down to an outdoor temperature of -7 C The Edel is ultra-quiet and can be installed in your living space ECONOMICAL The integrated heat pump extracts free calories from the air. Thanks to the heat pump, hot water is made available very quickly and at a very low cost. Thanks to its unique design, the Edel can make you up to 70% energy savings The Edel helps to reduce your electricity consumption and only requires 250W on average. ECO-FRIENDLY 100 L 80 L Help to reduce CO2 emissions thanks to its low energy consumption and high efficiency Protects the ozone layer and doesn t add to the greenhouse effect The only water heater to use a natural refrigerant in a very low quantity CATEGORY A+ A Check how much electricity you re using: The Edel uses 3 times less than an ordinary water heater EASY TO INSTALL 36 db(a) at 1 m Improve ENERGY EFFICIENCY in your home A wall bracket to make installation even easier: - the existing holes can be used - sturdy and reliable material - guarantees that your appliance will be perfectly vertical. Floor standing on an adjustable tripod (ref ) with three adjustable feet Rotates through 360 Only one hole to drill: easy to connect thanks to the small diametre of the insulated concentric air duct (125 mm) Up to 5m of air conduits with piping Up to 10m through a chimney free calories from the air heat pump a range of 80, 100, 120 or150 L tanks to suit all of your DHW needs smart controls, backlit screen - HOLIDAY mode to avoid energy consumption in case of prolonged absences - BOOST Mode to occasionally speed up heating if extra hot water is needed - Weekly programming to choose your heating modes day by day - COMFORT + Mode to guarantee you hot water in any circumstances 8 9

6 Edel WATER HEAT PUMP WATER HEATERS ON A WATER LOOP from 100 to 300 L Do you have underfloor heating? The Edel WATER uses return flow water from your underfloor heating or any other very low-temperature heating circuit to heat your domestic water. HOW DOES IT WORK? How it operates outside heating periods How it operates during heating periods A + CATEGORY A+ A UNEQUALLED QUALITIES: easy to install, only one hydraulic connection high thermal efficiency, with a > 4 COP incomparably quiet more comfortable, safer and more efficient than a heat pump which provides both heating and hot water (over 60% savings). HIGHLY EFFICIENT The integrated heat pump extracts calories from your underfloor heating return flow water with an outstanding COP. OUTSTANDING COP 4.5 standard EN BACK-LIT SMART CONTROLS at 1 m In summer, the free heat drawn from your underfloor heating goes back into your domestic water while cooling your house down at the same time, with an outstanding COP of up to 4.1. WATER DIVERSION DEVICE INCLUDED Flow to Edel Return from Edel underfloor return In winter, the Edel WATER extracts free heat from the outdoor air, through the generator which supplies the underfloor heating, to provide water at 60 C. Low-energy circulating pump wired in and fitted under the hood Less than 10 Watt energy consumption In summer, the free heat drawn from your underfloor heating goes back into your domestic hot water while cooling your house down at the same time. In winter, the Edel WATER uses the heat from the underfloor heating return flow to heat the domestic water with an outstanding COP. It is very compact and can be fitted anywhere in a house. ULTRA QUIET No fan, making it even quieter. High-performance compressor fitted on 4 silent blocks Choose your mode according to your needs: BOOST, COMFORT, ECO or HOLIDAY Automatic heating time function Integrated 'day/night' contact for operating on off-peak time. RETURN FLOW FROM UNDERFLOOR HEATING CIRCUIT Ø 1" 2 1 SUPPLY FLOW TO EDEL WATER RETURN FLOW FROM EDEL WATER Problem-free installation A > 35 C primary circuit mixing valve can be connected for the water diversion device (optional) 1 MANUAL STOP VALVES 2 CHECK VALVE 10 11

7 DOMESTIC HEAT PUMP FOR APART MENT BUILDING INDIVIDUAL SOLUTION FOR TERTIARY OR RESIDENTIAL BUILDING A.C.E SYSTEM SOLUTION EDEL AIR TO WATER HEAT PUMP Example: Student residence from LAXOU - EDEL 80L ACE System for 32 apartments. The Aeraulic Collective Edel system is the most energy efficient solution for apartment building MULTIPLE CONFIGURATIONS FOR ANY TYPES OF RESIDENTIAL BUILDINGS: Moreover, EDEL A.C.E, is a wide range of air accessories for multiple configurations and building layout. With patented-technology concentric air ducts Edel ACE is a standalone DWHP* with an optimized fan to supply / exhaust air from the roof, up to 6 floor building. Easy to install Up to 6 DWHP connected to a communal concentric air duct. Compactness Conform to building construction rules Each heat pump works independantly. Compatible with flat roof or inclined No hole visible and the building face. Edel ACE: a wide range of capacity (80, 100, 120, 150L), wall hung and compact. Edel ACE is the solution for low carbon buildings Innovation: balanced flow system with tube in tube air distribution Easy to install Compactness Conform to building construction rules A single hole through the wall Balance flow system patented for EDEL ACE 12 *Domestic Water Heat Pump Example 1 : G + 5 floor building, EDEL ACE is installed in each apartments, connected to a communal air duct Ø 200/300 Example 2 : G + 1 floor building, EDEL ACE is installed in each apartments, side by side, connected to a communal air duct (diam) 160/250 13

8 COMMERCIAL HEAT PUMP FOR CO MMUNAL INSTALLATION FOR COMMERCIAL, TERTIARY AND INDUSTRIAL APPLICATIONS MegaPAC DOMESTIC HOT WATER HRC 70 AIR TO WATER HEAT PUMP - HIGH TEMPERATURE 70 C kw A modular solution adapted to each project: - Up to liters per system - Up to 140 kw of heat pump heating capacity High capacity and high temperature 70 C in the primary circuit. 500 L L in one storage tank. Several tanks can be installed together for unlimited volume. High capacity serpentine coil for a reliable indirect heating. Anti-legionellosis treatment, 100% heat pump. Sturdiness and finesse with a Gialix wall-hung electric boiler as back-up. Any other back-up type can be used: - Pulsatoire boiler - electrical element in tank - solar thermal - district heating network HRC 70 Example: Student residence from LILLE - MegaPAC 3x35 kw - 2x2500L storage tank for 110 apartments. HEATING BATTERY installation from kw Heating solution with high capacity heat pump The hydraulic management system ensures optimum management of the heat pumps The decoupling tank guarantees the safety and durability of the installation MEGAPAC INSTALLATION EXAMPLE COMPLETE CONTROL OF THE INSTALLATION THANKS TO HYDRAULIC MANAGEMENT HRC 70 heat pumps, battery installation Delivery to communal sanitary hot water circuit For heating: apartment blocks, offices, schools, farm buildings, hotels, industrial buildings, etc. Start-ups in stages to increase power progressively Wall-fitted, hydraulic control system, including the regulation for linking 2, 3 or 4 HRC 70 s. HRC 70 pilot DHW tank Water cycling tank Cycling circuit A 200 L multi-functional decoupling tank, which decouples, degasses the hydraulic circuits, decants sludge and stratifies temperatures. Example of a 3x25 kw battery installation for an apartment block 14 15

9 GAS SOLUTIONS FOR COMMERCIAL HOUSING FOR COMMERCIAL, TERTIARY AND INDUSTRIAL APPLICATIONS Logix + MTHL THERMAL MODULE WITH DOMESTIC HOT WATER STORAGE CAPACITY For individualised heating and domestic hot water supply in community housing Pulsatoire GAS CONDENSING BOILER WITH PULSE REACTOR kw - The most eco-friendly gas condensing boiler on the market, with the best energy consumption levels All the advantages of a boiler room, the comfort of individual control and energy consumption per person. + - Less power required - Power start-ups in stages - The Pulsatoire will only use as much energy as it needs, depending on the outdoor temperature - Power production is decentralised, which prevents distribution losses and affords you more flexibility for managing your heating VS tank heaters L Service shaft Apartment 1 Apartment 2 - Enamelled tank 1 Circulator pump(s) 2 Heating supply 3 Heating return 4 Domestic cold water pipe 5 MTHL hydraulic distribution module 6 Domestic cold water manifold 7 Radiator / underfloor heating circuit 8 Logix central unit Communal boiler room - Coiled thermal heat exchanger - Soft-cover casing, fire safety category M1 - Thick steel, tested to 10 bar - Ideal to combine with Pulsatoire gas boilers or HRC 70 heat pumps. 9 Optional extras: - Room temperature 16 sensor, room thermostat 17

10 Pulsatoire GAS CONDENSING BOILER WITH PULSE REACTOR THE BEST FOR THE ENVIRONMENT The pulse reactor function limits greenhouse gases (CO 2 ), and brings NOx emissions almost down to zero. Naturally smart THE MANY ADVANTAGES OF A PULSATOIRE A complete range is available to meet any needs: - 20 kw, 32 kw, 40 kw and 60 kw boilers - battery installation possible for 64 kw to 240 kw Durability and reliability: Thanks to its self-cleaning function, this boiler is always at peak-performance level from 20 to 240 kw Incredibly efficient, up to 109% LHV: The 800 C temperature in the combustion chamber drops to 25 C as it leaves the boiler Up to 40% savings on your gas consumption: Continuous condensation means that almost all of the energy produced is transferred to the water for your heating 4 times less electricity consumption: The Pulsatoire uses 4 times less electricity than other condensing boilers as it doesn t need to extract combustion products 3-circuit self-adapting regulation: Can manage an underfloor heating circuit, a radiator circuit and a domestic water circuit Change your old boiler for a Pulsatoire: and you will improve energy efficiency without having to change your energy source Eco-friendly and economical A THE PULSATOIRE: A ONE-OF-A-KIND TECHNOLOGICAL WONDER ALL YOU NEED FOR COMBUSTION EXHAUST IS A SIMPLE PVC PIPE 50mm The genius of the Pulsatoire simple design easy to install user-friendly highly efficient CATEGORY A A patented-design stainless steel heating body, which is perfectly adapted to condensation, guaranteeing durability and efficiency. 63mm Can manage up to 3 separate circuits: (radiators, fan coil units, underfloor heating, DHW, swimming pool, etc...) COMFORT, ECO, or FROST PROTECTION, modes available to ensure optimum comfort when you re at home and savings when you re not kw for commercial, tertiary and industrial applications Less power needed: fitting a battery series of Pulsatoire boilers instead of one high-energy-consumption boiler gives greater flexibility for the user and requires less power Heating capacity increases in stages It will only use as much energy as it really needs, depending on the outdoor temperature Unlimited heating capacity: Heating capacity can reach several thousand kilowatts: this makes it the ideal solution for heating hotels, offices, factories or farm buildings. Pulsatoire boilers can easily be installed near to their points of use to reduce distribution losses. Watts PERTES WASTE GENERATED A L ARRÊT FROM GAS CONDENSING BOILERS DONNEES WHEN NOT PERRENOUD RUNNING RT PULSATOIRE 240 kw Chaudières Gas condensing gaz boilers à condensation currently on du the marché market P ~ 250 kw THE BEST ENERGY CONSUMPTION LEVELS UP TO 5 TIMES LESS WASTE WHEN NOT RUNNING depending on model According to calculations and findings in thermal data, waste when appliances are not running impacts more on a building s energy consumption than efficiency does. The Pulsatoire boiler has very low waste levels when not running, which makes it the most efficient gas condensing boiler room solution

11 OUTSTANDING EFFICIENCY Lélia Optimum efficiency: up to 109 % and energy savings of up to 40 %. Modulating heating control up to 24 kw depending on the outdoor temperature. Modulating domestic water control up to 30 kw to provide domestic hot water at the desired temperature, even in large quantities The installation has a high-performance degassing chamber to degas and purge extremely quickly and to provide better protection against corrosion. OPTIMUM SAFETY A filter valve with a stainless steel screen retains any dirt particles coming from the heating circuit. WALL MOUNTED OR FLOOR STANDING GAS CONDENSING BOILER from 8 to 30 kw Up to 40 % savings compared to a regular boiler A permanent flow and return temperature monitor keeps track of the water flow rate in the installation to prevent any abnormal rise in temperature in the heating body. An integrated bypass means that there is no need for a differential valve, even on an installation which is entirely equipped with thermostatically controlled valves. A CATEGORY A Instantly available MICRO-ACCUMULATED domestic hot water The Lélia constantly maintains the DHW temperature in its oversized stainless steel heat exchanger. The result: hot water is available immediately, whatever rate it may be drawn at. Customised operation: the Lélia Mixte can be used for microaccumulated DHW or instant DHW with a simple adjustment to the settings. PRODUCT RANGE Specific flow rate (Δt = 30 K) of 14.5 L per minute Incoming from the heating body Heating water Plated heat exchanger Hydraulic distribution panel LÉLIA MIXTE Heating and instantaneous domestic hot water Specific flow rate of up to 29 L per minute Under 14.5 L per minute, without drawing from the tank: the boiler works like Lélia Mixte. Incoming from the heating body Heating water Outgoing to the heating body 3-way valve DCW DHW Circulator pump LÉLIA PROFUSION Instantaneous and accumulated heating and DHW Plated heat exchanger Hydraulic distribution panel Circulator pump Outgoing to the heating body 3-way valve Over 14.5 L per minute, the boiler draws the extra hot water needed from the reserve accumulated in the tank, providing a flow rate of up to 29 L per minute. Tank can be positioned on the left OR right Water sensor Water sensor DHW tank DHW DCW DHW DCW Incoming from the heating body LÉLIA ACCUMULATION Heating and accumulated domestic hot water Hydraulic distribution panel Circulator pump Outgoing to the heating body 3-way valve - Horizontal air duct (C13) 60 /100 Ø up to 14 m - Vertical air duct (C33) 60 /100 Ø up to 14 m 80 /125 Ø up to 23 m Flue system DHW tank Water sensor - Chimney 80 Ø up to 30 m - Compatible with communal flue systems (C43) up to 14 m INTUITIVE & COMPREHENSIVE CONTROLS Easy access to settings DHW Heat exchanger for domestic water DCW LOW MAINTENANCE Sturdy and reliable valves are included, which enable you to isolate the boiler from the rest of the installation. Incredibly quick and easy access to all of the boiler s components and accessories via the front panel. The screen filter can be cleaned without draining the installation. The burner is quick and easy to remove for annual cleaning. Lélia Profusion Remote Control Ready FLOOR STANDING Lélia Profusion WALL HUNG 3 levels of comfort : COMFORT, ECO or frost protection 7 days programmable comfort schedule Self-learning function for efficient Domestic Hot Water

12 Gialix ELECTRIC, MODULATING WALL MOUNTED BOILERS from 2 to196 kw An outstanding boiler for outstanding efficiency CATEGORY A TERTIARY USE DOMESTIC USE Maximum power, adjustable to fit with the latest thermal regulations 6 kw : - 0 to 2 kw 12 kw :- 0 to 2 kw 16 kw :- 0 to 2.7 kw - 0 to 4 kw - 0 to 4 kw - 0 to 5.3 kw - 0 to 6 kw - 0 to 6 kw - 0 to 8 kw - 0 to 8 kw - 0 to 10.7 kw - 0 to 10 kw - 0 to 13.3 kw - 0 to 12 kw - 0 to 16 kw GIALIX 12MT - 2 CIRCUITS Heating and domestic hot water for new-builds and renovation projects: Domestic applications: 0.7 to 24 kw Tertiary applications 36 to 196 kw No storage tank or fuel pipes needed Odourless NUMEROUS ADVANTAGES The carefully chosen components and smart design make the Gialix an extremely quiet and reliable boiler No CO / CO 2 / NOx emissions No gas or fuel leaks No chimney or piping needed No installation work required No mandatory annual maintenance Only one energy provider needed Integrated load shedding function Energy billed after use Stable energy costs Ultra-quiet modulating regulation Seasonal efficiency 100% guaranteed Every kw used goes back into your heating CAST IRON Making the Gialix the most efficient electric boiler Robust and corrosion-proof. Hard-wearing over time. 100 % recyclable. Monobloc moulded, incoporates all hydraulic components, eliminates the need for piping and the risk of leakage UNIQUE The boiler degasses naturally thanks to the hydraulic connections being on top of the boiler Access to all hydraulic components through the front of the boiler. Hydraulically equipped for up to 24 kw. The inertia of the cast iron heating body means it operates gently and steadily, giving you greater comfort. Community housing and the tertiary sector (radiators, underfloor heating, unit heaters, domestic hot water etc.. Community domestic hot water with a plated heat exchanger or heating tank Swimming pools, with a plated heat exchanger Industrial processes Back-up for renewable energies Wall mounted and very compact, easy to install anywhere Gialix DS Designed to supply 2 independent heating circuits 2 independent cast iron heating bodies Adjustable maximum power : - 2 kw (0 to 2 kw) 2 x - 4 kw (0 to 4 kw) - 6 kw (0 to 6 kw) TA1 Underfloor heating ELECTRIC BOILER WITH DHW STORAGE FOR HEATING AND DOMESTIC HOT WATER All the advantages of the Gialix MT with the added comfort of having a rapidly regenerated supply of hot water on demand Replaces your old gas boiler and eliminates the need for a service subscription: you will only have one meter in your house Extremely compact, providing heating for your home and an abundant supply of hot water Gialix 2 circuits TA2 Radiators RTS2 Ultra-precise controls, just like those in the Gialix MT range Power output adjustable in 2kW stages 80 litre DHW tank 155 L of hot water output at 40 C in10 min Only 25 min needed for the tank to regain its temperature(1) 5 times less scale than an ordinary electric water heater: the solution for hard water (1) from 40 to 65 C 22 23

13 Rembrandt CAST IRON, FLOOR STANDING FUEL CONDENSING BOILER Rembrandt fuel or gas: HIGH PERFORMANCE Simple, robust and efficient 25 and 40 kw Better comfort and lower costs, without changing your energy source A CATEGORY A A complete range from 20 to 40 kw to suit any needs and budget Enjoy all the qualities of the Rembrandt range: - suitable as back-up for renewable energies - little maintenance required REB 25 Chauffage REB Chauffage + ECS RCB Heating RCB Heating + DHW The Rembrandt fuel condensing boiler uses water vapour from combustion and condenses it to recover the heat which is usually lost. The result: higher efficiency and lower consumption It is the most environmentally-friendly and economical fuel boiler on the market. OUTSTANDING PERFORMANCE The Rembrandt can be connected with air ducts or a chimney, depending on your configuration The Rembrandt is compact, making it easy to install All of the components can be accessed through the front of the boiler OUTSTANDING PERFORMANCE The blue-flame burner and ceramic condenser provide an exceptional performance of up to 104% and also help you to make substantial energy savings Up to 40% more economical than an old boiler Changing your old boiler for a Rembrandt fuel condensing boiler means that you can improve your home s energy efficiency without changing your energy source. CAST IRON HEATING BODY Optimum resistance thanks to the cast iron heating body: robust, corrosion-proof and hard-wearing The cast iron heating body lengthens operating cycles: - reduces dirt and clogging in the burner - reduces NOx and CO emissions - highly efficient The inertia of the cast iron means it operates steadily and gently for your increased comfort. EFFICIENT, ROBUST AND RELIABLE A winning combination for a hardy boiler that is sure to stand the test of time: The blue-flame burner for efficient combustion and reduced NOx emissions Cast iron heating body with very thick walls, three fume paths and a large heat exchanger surface The ceramic condenser is compact and integrated into the boiler. the ceramic properties ensure better protection against acidic fuel condensates and prolong the lifespan of the boiler. Outgoing to heating DOMESTIC HOT WATER With a Rembrandt boiler: With an integrated 100 L enamelled tank: - REB RCB or Connected to an AUER tank: With a 100 to 300 L heat pump water heater: To save even more money, your domestic hot water can be produced using the floor-standing or wall mounted Edel Connections: - onto outdoor or ambient air - onto return-low water from the underfloor circuit - Up to 20m piping possible fumées Fume condensation Incoming from heating RCB or REB + PEJ BRV 24 25

14 Logix THERMAL MODULE WITH ACCUMULATED DOMESTIC HOT WATER CIC Modules MULTI-APARTMENT DISTRIBUTION MODULES FOR HEATING AND DOMESTIC WATER 80 and 120 L 1-8 apartments Simple and sustainable water distribution B CATEGORY A Streamlining collective distribution CATEGORY A The Logix is a substation which manages heating and domestic hot water production for your accommodation using energy from a boiler room. It includes an 80 or 120 litre storage volume. The interface is located in the service shaft in between the collective network and the apartments The advantages of a collective boiler room, the comfort of individual regulation and individualised consumption + The aim: to improve user comfort and the energy efficiency of the building, with up to 10% savings THE UNIQUE ADVANTAGES No need to maintain primary circuit temperature No discomfort caused by the common parts of the installation overheating in the summer. The comfort of accumulated DHW No plated heat exchanger = no scale Individual electronic regulation and heating and domestic hot water consumption displayed Simplified design = less space needed and any unnecessary piping can be removed Simplified hydraulic balancing, with the MTHL module installed in the service shaft. No DHW loop needed as long as a maximum piping distance of 8 m, horizontally or vertically, is respected. MTHL : Multi-apartment thermal module for the Logix The interface is located in the service shaft between the collective network and the Logix units installed in the apartments KEEPING COSTS UNDER CONTROL The distribution circuits are hydraulically independent Time saving installation Groups delivered pre-assembled and insulated Space allocated for monitoring individual consumption STREAMLINING Easy-to-balance primary output, by level (apartment loops are automatically balanced) Easy-to-recognise circuits thanks to the layout of the components Easy access to all parts Heating modules EXCLUSIVE PRODUCT RANGE MTHC with circulator pumps Heating and domestic hot water modules 1 to 8 apartments per floor 2 versions: - standard accommodation - new builds with very low flow rate MTH2V with 2-way control valves with thermal actuators 26 Logix In each apartment MTHL On the landing of each floor Heat-reading meters (2) can be installed in the service shaft on MTHL modules to monitor the cost of your heating and domestic hot water consumption. (1) Domestic Hot Water (2) not supplied EXCLUSIVE MDC with circulator pumps MD2V with 2-way control valves with thermal actuators 27

15 Thorix EVOLUTION HYDRAULIC MANAGEMENT MODULE Arenal THE NEW GAS FIREPLACES USER-FRIENDLY, QUICK AND EASY TO INSTALL: - For both NEW BUILDS and RENOVATION PROJECTS: manages a radiator circuit and an underfloor heating circuit - PLUS: it assists the heat pump de-icing function THE ADVANTAGES Manages mixed circuit depending on outdoor temperature Easy tests and adjustments Optimised annual performance Compact, accessible and ready to connect Low energy circulating pump EEI < 0.23 Ideal for heat pumps and condensing boilers Reduced labour time and costs Can be fitted to the wall quickly and easily For optimum management of your heating circuits Heat pump de-icing assistance function: The inertia from the underfloor heating serves as a heat reserve, which is needed for the heat pump de-icing cycles, making a larger reserve available. Integrated bypass CATEGORY A EXCLUSIVE Outdoor temperature function: constantly measures the temperature delivered by the generator and simultaneoulsy deducts the target temperature for the mixed circuit. Arenal Vertical Arenal H900 from 4,8 to 8,6 kw The new Arénal gas fireplace are attractive gas solutions : economic, ecological and practical for single house builders No dust No chore of wood Outstanding performance Week programming facility Instant ignition BEAUTIFUL AS FIRE, EASY AS GAS Thorix ÉVOLUTION T C T C All types of generator: boiler, heat pump... Key 1multifunctional group: Low-energy, variable-speed circulator pump with 3-way motorised control valve Arenal H700 T C 2-way motorised valve (optional extra) for controlling direct circuit RT DIRECT CIRCUIT Radiators or fan convectors at the temperature of the generator MIXED CIRCUIT Underfloor heating or radiators at a lower temperature T C Room thermostat or room temperature sensor (optional extra) for mixed or direct circuits Outdoor sensor (supplied) Generator temperature sensor Thermostatically controlled valve 3 MODELS : - Vertical : the beauty of the tall and dancing flames - Horizontal 700 : easy installation in existing fireplaces - Horizontal 900 : panoramic view and pleasure of the flames 28 29

16 5200 RN F109 GAS Radiators Dulcis & MV GAS RADIATORS VR/VT from 100 to W Radiators that can operate without electricity**, guaranteeing heating at any time INNOVATIVE AND ECONOMICAL: these radiators meet the latest heating regulation requirements Very low energy All the benefits of heating room by room Less costly to install than a central heating system ENSURING YOUR COMFORT Savings through direct heating. Only the gas energy needed to heat the room is used. This means approximately 15% less energy is used than in a central heating system.* The remarkable reliability and undisputed durability of AUER cast iron heating bodies, which come with a 20-year guarantee**. Chimney or air duct connection (depending on model) WORKS WITHOUT ELECTRICITY CAST IRON Heating body 20 year guarantee ** The modulating regulation enhances your comfort, as the radiators diffuse heat evenly and operate ultra-quietly 3 Dulcis models W W W 5 MV models to 6500 W THE ADVANTAGES WORKS WITHOUT ELECTRICITY CAST IRON HEATING BODY: MAKING IT THE MOST EFFICIENT OF RADIATORS Outstanding output up to 92 % Radiates the steady, gentle heat that comes from inertia These radiators work without electricity** and are unaffected by wind, floods, ice or snow. Simplified maintenance: no annual maintenance required** Easy to install thanks to the horizontal air duct connection (depending on model) Domestic or tertiary Visible or invisible flame *High performance boiler **Except for the the Séméru stove. Very high energy output Precise modulating control NOx: category V in CE standards AUER patented horizontal duct system Low in power, adjustable to your needs No hydraulic circuit needed Diffuses heat gently and consistently for guaranteed comfort. Robust and corrosion-proof Long life span 100 % recyclable CAST IRON Heating body 20 year guarantee No electrical devices required 30 No annual maintenance required Low installation costs Can be fitted directly onto the wall, fits easily into your room, even in corners. Easy maintenance without removing the gas line A design which combines simplicity and elegance to blend in perfectly with any decor Energy performance equivalent to that of a gas condensing boiler, without annual maintenance Moulded aluminium Visually discreet Easy to operate THE HORIZONTAL DUCT SYSTEM The appliance functions with an airtight circuit which does not communicate with the air in the room. No gas can escape into the apartment so there is no risk of CO or CO 2 poisoning. radiator air inlet pipe air outlet pipe 31

17 ENGLISH VERSION AUER, a certified training centre (1) 32 We provide courses which enable participants to become operational immediately. We offer professionals a wide range of courses on installations and heating and domestic hot water solutions. The courses take place on our development and manufacturing site in Picardie ; our training centre in Feuquières-en-Vimeu is equipped with specially-adapted rooms for: handling materials in a real context training with simulation control boards (1) Certified training organisation n (2) Courses available on demand. Minimum number of participants required. Communication materials A wide range of commercial documents are available to you on our website: Contact us : HEAD OFFICE AND EXPORT 109 boulevard Ney Paris cedex 18 Tel: Fax TRAINING AND TECHNICAL ADVICE Tel: Fax enr@auer.fr The photographs and information contained in this document are non-contractual. AUER reserves the right to modify all characteristics of all appliances without prior notice. Ref. B MARCH 2018