ELITE SERIES Upflow / Horizontal - High Efficiency Blower Motor

Size: px
Start display at page:

Download "ELITE SERIES Upflow / Horizontal - High Efficiency Blower Motor"

Transcription

1 PRODUCT SPECIFICATIONS GAS FURNACES EL95UHE ELITE SERIES Upflow / Horizontal - High Efficiency Blower Motor Bulletin No. 065 March 08 Supersedes February 08 AFUE - 95% Input - 0,000 to,000 Btuh Nominal Add-on Cooling -.5 to 5 Tons MODEL NUMBER IDENTIFICATION EL 95 UH 070 X E 6 B Unit Type EL = Elite Series Stages = One-Stage AFUE 95 = 95% Configuration UH = Upflow/Horizontal Nominal Gas Heat Input 00 = 0,000 Btuh = 44,000 Btuh 070 = 66,000 Btuh 090 = 88,000 Btuh 0 = 0,000 Btuh 5 =,000 Btuh Cabinet Width B = 7-/ in. C = in. D = 4-/ in. Nominal Add-On Cooling Capacity 4 = tons 6 =.5- tons 48 =.5-4 tons 60 = -5 tons Blower E = High Efficiency Constant Torque Blower Motor Low NO x X = Units meet California Nitrogen Oxides Standard (40ng/J) Indoor coils with the same letter designation will physically match the furnace.

2 FEATURES K B CONTENTS D Blower Data... Dimensions - Furnace/Coil Combined Dimensions... 7 H Dimensions - Horizontal Position... 5 F Dimensions - Upflow Position... 4 E C Features... Gas Heat Accessories... 8 High Altitude Derate... 9 G Installation Clearances... 9 Model Number Identification... Optional Accessories... 8 Optional Accessory Dimensions... 6 Specifications... 7 Vent Lengths... 0 WARRANTY Duralok Plus Aluminized Steel Heat Exchanger Limited Lifetime warranty in residential applications (twenty-year transferable), ten years in non-residential applications. All other covered components - Limited Five-Year warranty in residential applications, one year in nonresidential applications. Refer to Lennox Equipment Limited Warranty certificate included with equipment for details. APPROVALS Units are certified by AHRI. Units tested and rated according to US DOE test procedures and FTC labeling regulations. Approved by the California Energy Commission and meets California Nitrogen Oxides Standard (NOx) limits of 40 ng/j. Energy Star certified units are designed to use less energy, help save money on utility bills, and help protect the environment. ISO 900 Registered Manufacturing Quality System. Blower data from unit tests conducted in Lennox Laboratory air test chamber. EL95UHE / Page M L I J APPLICATIONS Input capacities of 0,000, 44,000, 66,000, 88,000, 0,000 and,000 Btuh. Energy efficiency (AFUE) of 95%. Compact cabinet for upflow, horizontal-left or horizontalright applications without any modifications. Removable bottom seal panel shipped in place for side return air is easily removed for bottom/end return air applications. Utility room, alcove, closet, crawl space, basement or attic installation. Lennox add-on indoor coils, high-efficiency air cleaners and humidifiers can easily be added to furnace. Shipped factory assembled with all controls installed and wired. Each unit factory test operated to ensure proper operation. NOTE - FURNACES CANNOT BE TWINNED!

3 B C D FEATURES HEATING SYSTEM Lennox Duralok Plus Heat Exchanger Assembly Lennox developed heat exchanger assembly consists of primary heat exchanger and secondary condenser coil assembly. Main multi-pass crimped seam design clamshell type heat exchanger. Constructed of heavygauge, aluminized steel. Designed for normal expansion and contraction with maximum efficiency and minimum resistance to air flow. Secondary heat exchanger condenser coil constructed of aluminum fins fitted to stainless steel tubes. Coil is factory tested for leaks. Condensate drain header box assembly located on front of coil. Compact size of complete heat exchanger assembly permits low overall design of furnace cabinet. Heat exchanger assembly has been laboratory life cycle tested in excess of industry standards. Lennox Designed Header Box Header box on end of condenser coil collects flue condensate for disposal through condensate drains. The drains are located on each side of the cabinet for easy field installation of condensate drain trap. Only one drain is used, the other drain is sealed. Condensate drain trap is included with the unit for field installation. Lennox Designed Flue Condensate Trap Assembly Condensate trap assembly is mounted outside the conditioned air stream. Assembly can be mounted on either side of cabinet in upflow applications. Assembly is mounted below the cabinet in horizontal applications. Can also be mounted remotely (up to 5 ft. away) from unit. See Installation Instructions. 90 street elbow furnished for ease of drain trap installation. Drain connection can be made with field provided PVC pipe, PVC coupling, or vinyl tubing with hose clamp. Drain cap on trap allows easy cleaning and winterizing. Inshot Burners Aluminized steel inshot burners provide efficient, trouble-free operation. Burner venturi mixes air and gas in correct proportion for proper combustion. Burner assembly is removable from the unit as a single component for ease of service. E F G H SureLight Hot Surface Ignitor Tough, reliable, long-life, trouble-free performance. Silicon nitride ignitor. Cemented to steatite block for protection against current leakage. Ignition leads are constructed of nickel-plated copper and are enclosed in high temperature Teflon insulation for dependable operation. Gas Control Valve 4 volt redundant combination gas control valve combines manual shut off switch (On-Off), automatic electric valve (dual) and gas pressure regulation into a compact combination control. Combustion Air Inducer Shaded pole heavy duty blower prepurges heat exchanger and safely vents flue products. Operates only during heating cycle. Pressure Switch Proves Combustion Air Inducer operation before allowing gas valve to open. Flame Rollout Switches () Manual reset switches are factory installed in burner box. Switch provides protection from abnormal operating conditions. Limit Control Automatic reset, primary limit is accurately located on vestibule panel on all units. Optional Accessories High Altitude Orifice Kits Required on all units for proper unit operation at altitudes from 750 to 0,000 ft. Kits are available for natural gas and LPG/propane. High Altitude Pressure Switch Kit Required for proper unit operation on installations above 4500 ft. Natural Gas to LPG/Propane Conversion Kit Required for field changeover from natural gas to LPG/ Propane. LPG/Propane to Natural Gas Conversion Kit Required for field changeover from LPG/Propane to natural gas. EL95UHE / Page

4 FEATURES HEATING SYSTEM (continued) Optional Accessories (continued) Muffler (US Only) Significantly reduces outdoor operating sound levels. Two-inch diameter muffler is optional for 00 through 0 input models. NOTE - Two-inch muffler is optional for the 0 input model with a maximum vent pipe length of up to 9 ft. Three-inch diameter muffler is optional for 0 and 5 input models. NOTE - Three-inch muffler is optional for the 0 input model with a minimum vent pipe length of 0 ft. Installed vertically in the exhaust piping. See Optional Accessory Dimension Drawing. DIRECT VENT / NON-DIRECT VENT SEALED COMBUSTION SYSTEM Furnace features a sealed combustion system and can be installed in either Direct Vent or Non-Direct applications. In Direct Vent applications, combustion air is supplied from outdoors and flue gases are discharged outdoors. In Non-Direct Vent applications, combustion air is supplied from indoors and flue gases are discharged outdoors. NOTE - Lennox has approved the use of DuraVent PolyPro and Centrotherm InnoFlue manufactured vent pipe and terminations as an alternative to PVC vent pipe. Must be ordered separately. Tested and listed to the ULC S66 standard in Canada. The polypropylene venting system must follow the uninsulated and unconditioned space vent lengths listed in the table on Page. Refer to the Installation Instructions for additional details. Optional Accessories Termination Kits Facilitates installation of combustion air intake pipe and flue exhaust pipe. Refer to venting table in this bulletin to determine pipe size needed and proper termination kit required. See Optional Accessories table and dimension drawings. Termination Kit - Concentric - Direct Vent Applications or inch kit contains concentric termination assembly, reducer bushing and 45 degree elbow. inch kit for models contains an outdoor exhaust accelerator. Kit requires single hole penetration of roof or wall for installation. Roof Termination Flashing Kit is available for use with inch Kits. CSA certified. I Termination Kit - Flush-Mount Kit contains flush-mount termination, accelerator, mounting template and hardware. Kit may be used with, -/ or in. pipe. Termination Kits - Wall Assembly Close Couple (US Only) - Direct Vent Applications or inch kit consists of close-couple, side-by-side PVC piping with galvanized steel wall cover plate for sealing and isolating piping penetration of the wall. Piping spacing and length is sized for proper wall installations. CSA certified. Close Couple WTK (Canada Only) - Direct Vent Applications or inch kit contains one insulated faceplate, one insulated exhaust pipe, elbow and fittings. Wall Ring - Direct Vent or Non-Direct Vent Applications inch kit contains stainless steel outside seal caps, galvanized steel inside seal caps, 4 seal rings for the caps and 8 inch insulation sleeve for sealing and isolating intake and exhaust piping penetration of wall. Maintain a maximum of 6 inches between the inlet and outlet openings in the installation of the pipes. Roof Termination Flashing Kit inch kit contains two neoprene rubber roof flashings for vertical venting through a roof. Vent pipe and insulation not furnished. Flashing Kit can also be used with inch Concentric Vent Termination Kits used in vertical venting rooftop applications. CONTROLS SureLight Integrated Furnace Control Contains all necessary controls and relays to operate furnace. Combustion air inducer is operated by the integrated furnace control. Prior to ignition, a pre-purge cycle for 5 seconds is initiated. After the main burners are turned off, a post-purge cycle for 5 seconds is run. Flame sensor assures safe and reliable operation. Should loss of flame occur, the integrated furnace control will initiate 4 re-attempts at ignition before locking out unit operation for 60 minutes. Watchguard type circuit automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance calls for service. Fan control consists of adjustable blower timed-off delay (60, 90, 0, 80 seconds - factory setting 90 seconds) and fixed blower timed-on delay (0 seconds heating, seconds cooling). For air-conditioning applications, blower is automatically energized on thermostat demand for cooling. EL95UHE / Page 4

5 FEATURES CONTROLS (continued) Two accessory terminals furnished for additional power supply requirements for 0 volt (less than amp) power humidifiers and powered air cleaners. One additional terminal is furnished for power supply requirements for 4V (less than 0.5 amp) low voltage accessories. Ignition control has a single red LED to indicate status and as an aid in troubleshooting. Last ten codes are stored in non-volatile memory (accessible by recall button on control) for servicing. 4 Volt Transformer Furnished and factory installed in control box. 40VA transformer has circuit breaker wired in series. Field Wiring Make-Up Box Furnished for line voltage wiring. Factory installed internally on left side of furnace. Box may be installed internally or externally on either side of furnace. Optional Accessories Blower Relay Kit (For Use With Two-Stage Outdoor Units) Allows furnace blower speed changes when matched with two-stage air conditioners or heat pumps. Thermostat Thermostat (programmable/non-programmable) is not furnished with unit. See Thermostat bulletins in Controls Section and Lennox Price Book for selection. Night Service Kit Contains most commonly used service parts: Furnace control Igniter Flame sensor Gas valve Transformer Service Manual J K L M BLOWER Direct drive blower. Statically and dynamically balanced. Resiliently mounted. Blower assembly easily removed for servicing. Power Saver Constant Torque Blower Motor DC Brushless Motor High Efficiency Constant Torque. ECM (Electronically Commutated Motor). Motor is programmed to provide constant torque at each of the selectable speeds. Motor is controlled by the Integrated Furnace Control. Blower speeds are easily changed on the integrated furnace control. See Blower Data tables. CABINET Low-profile, narrow width cabinet allows easy installation in upflow or horizontal applications. Heavy-gauge, cold rolled steel construction. Pre-painted cabinet finish. Flanges provided on supply air opening for ease of plenum connection or alignment with indoor coil. Fully insulated cabinet with foil-faced insulation on sides and back of heating compartment and mat-faced insulation in blower compartment. Sealed blower compartment. Inner blower compartment access panel seals blower compartment from air leakage. Cabinet door can be removed without any tools. Complete service access. Safety interlock switch automatically shuts off power to unit when blower compartment access panel is removed. Gas piping and electrical inlets are provided in both sides of cabinet. Return Air Entry: For bottom/end return-air entry for upflow/horizontal applications, remove furnished bottom seal panel from cabinet. For side return-air entry (upflow applications only), corners are marked on either side of cabinet for return air cut-outs. See Dimension Drawings. EL95UHE / Page 5

6 FEATURES CABINET (continued) NOTE - 60C and 60D size units that require air volumes over 800 cfm must have one of the following:. Single side return air and Optional Return Air Base with transition that must accommodate required 0 x 5 x inch air filter to maintain proper velocity.. Bottom return air.. Return air from both sides. 4. Bottom and one side return air. See Blower Performance Tables for additional information. Coil Match-Up All furnaces exactly match Lennox cased upflow indoor coils and horizontal indoor coils with same letter designation (A, B, C, D) in model number. No adaptor required. Engaging holes furnished on cabinet for alignment. Lennox uncased coils match furnaces without any overhang but require an optional adaptor base or field fabricated transition to match furnace opening. See coil bulletin for additional information. Low Leakage Cabinet All models have less than % air leakage and meet ANSI/ASHRAE Standard 9-00 Method of Test for Determining the Air Tightness of HVAC Equipment. Optional Accessories Condensate Drain Heat Cable Kits Self-limiting wattage heat cable prevents condensate drain from freezing in unconditioned areas. Available in 6 or 4 ft. lengths. Heat Cable Tape 66 ft. length, / in. wide fiberglass. Horizontal Suspension Kit Provides suspension of unit and indoor coil in horizontal applications. Allows complete service access. Consists of corner mounted hanging brackets with vibration isolators, return air end support rail and hardware for assembly. Metal hanging straps must be field provided. Crawl Space Vent Drain Kit Allows venting through a crawl space for upflow and horizontal applications. Includes or in. sanitary tee, in. PVC assembly, PVC boot and clamp. Kit for Canada is certified to ULC S66. Return Air Base On furnaces with side return air and condensate trap on the same side of the cabinet, a field fabricated transition or Return Air Base is required when using an IAQ product higher than 4-/6 in. installed next to the unit and serviced from the front. IAQ products higher than 0 in. require a field fabricated transition. Must be used for 60C and 60D models with air volumes over 800 cfm in upflow applications when only one side return is required. Cabinet is shipped flat for easy field assembly and is pre-painted steel to match the furnace. See Dimension Drawing. High Performance Economizer (Commercial Applications Only) Designed for applications requiring outdoor air to be utilized in a commercial HVAC system. Allows the entry of fresh outdoor air for free cooling, reducing the requirement for mechanical cooling. Heavy gauge galvanized steel cabinet lined with thick fiberglass insulation. Mixed air sensor, outdoor air sensor and 4VAC transformer furnished. Approved for California Title 4 building standards. ASHRAE compliant. See separate Product Specifications bulletin for additional information and available control and sensor options. FILTER (not furnished) Filter and provisions for external mounting must be field provided. Optional Accessories Air Filter and Rack Kit for Horizontal Return Air (End) Applications Washable or vacuum cleanable polyurethane frame type filter and external end return air rack available for field installation. Rack has filter door for easy filter servicing. Flanges on rack allow easy duct connection. See Dimension Drawing. Air Filter and Rack Kit for Upflow Side Return Air Applications - Not for use with Return Air Base Washable or vacuum cleanable polyurethane frame type filter and external side return air rack available for field installation. Available in single and ten pack kits. Rack has filter door for easy filter servicing. Flanges on rack allow easy duct connection. Field installs on either side of unit cabinet. See Dimension Drawing. EL95UHE / Page 6

7 SPECIFICATIONS Gas Heating Performance Model No. EL95UH00XE4B EL95UHXE4B EL95UHXE6B EL95UH070XE6B AFUE 95% 95% 95% 95% Input - Btuh 0,000 44,000 44,000 66,000 Output - Btuh 8,000 4,000 4,000 6,000 Temperature rise range - F Gas Manifold Pressure (in. w.g.) Nat. Gas / LPG/Propane.5 / 0.5 / 0.5 / 0.5 / 0 High static - in. w.g Energy Star Certified Yes Yes Yes Yes Connections in. Indoor Blower Intake / Exhaust Pipe (PVC) / / / / Gas pipe size IPS / / / / Condensate Drain Trap (PVC pipe) - i.d. /4 /4 /4 /4 with furnished 90 street elbow /4 slip x /4 Mipt /4 slip x /4 Mipt /4 slip x /4 Mipt /4 slip x /4 Mipt with field supplied (PVC coupling) - o.d. /4 slip x /4 MPT /4 slip x /4 MPT /4 slip x /4 MPT /4 slip x /4 MPT Wheel nom. dia. x width - in. 0 x 8 0 x 8 0 x 8 0 x 8 Motor Type DC Brushless DC Brushless DC Brushless DC Brushless Motor output - hp / / / / Tons of add-on cooling Air Volume Range - cfm Electrical Data Voltage 0 volts - 60 hertz - phase Blower motor full load amps Maximum overcurrent protection Shipping Data lbs. - package NOTE - Filters and provisions for mounting are not furnished and must be field provided. Annual Fuel Utilization Efficiency based on DOE test procedures and according to FTC labeling regulations. Isolated combustion system rating for non-weatherized furnaces. SPECIFICATIONS Gas Heating Performance Model No. EL95UH090XE48C EL95UH0XE60C EL95UH5XE60D AFUE 95% 95% 95% Input - Btuh 88,000 0,000,000 Output - Btuh 85,000 06,000 8,000 Temperature rise range - F Gas Manifold Pressure (in. w.g.) Nat. Gas / LPG/Propane.5 / 0.5 / 0.5 / 0 High static - in. w.g Energy Star Certified Yes Yes No Connections in. Indoor Blower Intake / Exhaust Pipe (PVC) / / / Gas pipe size IPS / / / Condensate Drain Trap (PVC pipe) - i.d. /4 /4 /4 with furnished 90 street elbow /4 slip x /4 Mipt /4 slip x /4 Mipt /4 slip x /4 Mipt with field supplied (PVC coupling) - o.d. /4 slip x /4 MPT /4 slip x /4 MPT /4 slip x /4 MPT Wheel nom. dia. x width - in. 0 x 0 -/ x 0 -/ x 0 Motor Type DC Brushless DC Brushless DC Brushless Motor output - hp /4 Tons of add-on cooling Air Volume Range - cfm Electrical Data Voltage 0 volts - 60 hertz - phase Blower motor full load amps Maximum overcurrent protection Shipping Data lbs. - package NOTE - Filters and provisions for mounting are not furnished and must be field provided. Annual Fuel Utilization Efficiency based on DOE test procedures and according to FTC labeling regulations. Isolated combustion system rating for non-weatherized furnaces. EL95UHE / Page 7

8 OPTIONAL ACCESSORIES - ORDER SEPARATELY NOTE - FURNACES CANNOT BE TWINNED! EL95UHE / Page 8 B Width Models C Width Models D Width Models CABINET ACCESSORIES Horizontal Suspension Kit - Horizontal only 5W0 5W0 5W0 Return Air Base - Upflow only 50W98 50W99 5W00 High Performance Economizer (Commercial Only) 0U5 0U5 0U5 CONDENSATE DRAIN KITS Condensate Drain Heat Cable 6 ft. 6K68 6K68 6K68 4 ft. 6K69 6K69 6K69 Heat Cable Tape Fiberglass - / in. x 66 ft. 6G5 6G5 6G5 Crawl Space Vent Drain Kit US 5W8 5W8 5W8 Canada 5Z70 5Z70 5Z70 CONTROLS Blower Relay Kit (for two-stage outdoor units) 85W66 85W66 85W66 FILTER KITS Air Filter and Rack Kit Horizontal (end) Size of filter - in. 87L96-8 x 5 x 87L97-0 x 5 x 87L98-5 x 5 x Side Return Single 44J 44J 44J Ten Pack 66K6 66K6 66K6 Size of filter - in. 6 x 5 x 6 x 5 x 6 x 5 x NIGHT SERVICE KIT Night Service Kit 84W48 84W48 84W48 TERMINATION KITS See Installation Instructions for specific venting information. Termination Kits - Direct Vent Applications Only Termination Kits - Direct or Non- Direct Vent Roof Termination Flashing Kit - Direct or Non- Direct Vent ( flashings) Cleanable polyurethane frame type filter. Concentric US - in. 7M80 69M in L46 60L46 Canada - in. 44W9 44W in W9 44W9 Flush-Mount US -, -/ or in. 5W 5W 5W Canada -, -/ or in. 5W 5W 5W Wall - Close US - in. G Couple in. 44J40 44J40 44J40 Wall - Close Canada - in. 0G Couple WTK in. 8J0 8J0 8J0 Roof in. 5F75 5F Wall Ring Kit in. 5F74 5F Kits contain enough parts for two, non direct vent installations. Non-direct vent only. in. 44J4 44J4 44J4 NOTE - Termination Kits (44W9, 44W9, 0G8, 5W, 5W9, 8J0) and Crawl Space Vent Drain Kit (5Z70) are certified to ULC S66 standard for use in Canada only. GAS HEAT ACCESSORIES Input High Altitude Pressure Switch Kit Natural Gas to LPG/Propane Kit LPG/Propane to Natural Gas Kit Natural Gas High Altitude Orifice Kit LPG/Propane High Altitude Orifice Kit ft ,000 ft ft ft ,000 ft ,000 ft. Muffler (US Only) 00 No Change U65 X54 N/A 4C90 4C9 5Y66 (-inch) No Change U65 K49 7W8 7W7 K44 5Y66 (-inch) 070 U7 U64 K49 7W8 7W7 K44 5Y66 (-inch) 090 U70 U64 K49 7W8 7W7 K44 5Y66 (-inch) 0 U7 U64 K49 7W8 7W7 K44 5Y66 (-inch) 6A56 (-inch) 5 U70 U64 K49 7W8 7W7 K44 6A56 (-inch) Two-inch diameter muffler (5Y66) is optional for 0 input model with a maximum vent pipe length of up to 9 ft. Three-inch diameter muffler (6A56) is optional for 0 input model with a minimum vent pipe length of 0 ft.

9 HIGH ALTITUDE DERATE NOTE - Units may be installed at altitudes up to 0,000 ft. At altitudes above 450 ft. the unit must be derated to match the manifold pressure information shown below. Units installed at altitudes of 450 to 0,000 ft. require a pressure switch change. Units installed at altitudes of 750 to 0,000 ft. require an orifice change. See the Gas Heat Accessories table for ordering information. NOTE - This is the only permissible derate for these units. NOTE - In Canada, certification for installations at elevations over 4500 feet is the jurisdiction of local authorities. Input All Sizes OUTDOOR TERMINATION KIT USAGE Input Size 00/ Vent Pipe Diameter (in.) Flush Mount Kit 5W (US) 4 5W (CA) Standard Terminations INSTALLATION CLEARANCES - INCHES (MM) Sides Rear Top/Plenum Front Front (service/alcove) Floor Wall Kit Wall Ring Kit inch inch inch G44 (US) 4 0G8 (CA) 44J40 (US) 4 8J0 (CA) 5F74 Field Fabricated Exhaust Accelerator Size Required 0 inches (0 mm) 0 inches (0 mm) inch (5 mm) 0 inches (0 mm) 4 inches (60 mm) Combustible NOTE Air for combustion must conform to the methods outlined in the National Fuel Gas Code (NFPA 54/ANSI Z.) or the National Standard of Canada CAN/CSA B49. Natural Gas and Propane Installation Code. NOTE In the U.S. flue sizing must conform to the methods outlined in the current National Fuel Gas Code (NFPA 54/ ANSI Z.) or applicable provisions of local building codes. In Canada flue sizing must conform to the methods outlined in National Standard of Canada CAN/CSA B49.. Allow proper clearances to accommodate condensate trap and vent pipe installation. Do not install the furnace directly on carpeting, tile, or other combustible materials other than wood flooring. Concentric Terminations Concentric Kit -/ inch inch inch 7M80 (US) 4 44W9 (CA) 69M9 (US) 4 44W9 (CA) 60L46 (US) 4 44W9 (CA) YES YES YES YES -/ in. YES / YES YES YES YES -/ in. YES YES YES YES YES -/ in. YES YES YES YES YES -/ in. YES / YES YES YES YES -/ in. YES YES YES YES YES -/ in. YES YES YES YES in YES YES -/ YES YES YES in YES YES YES YES YES in YES YES YES YES YES in YES YES -/ YES YES in YES YES YES YES in YES YES 5 YES YES in YES NOTE - Standard Terminations do not include any vent pipe or elbows external to the structure. Any vent pipe or elbows external to the structure must be included in total vent length calculations. See Vent Length Tables. Requires field provided -/ in. outdoor exhaust accelerator. Concentric Kits 7M80 and 44W9 include -/ in. outdoor exhaust accelerator, required when used with and 070 input models. Accelerator is not used with 090, 0, 5 input models. Gas Flush Mount Kit 5W and 5W includes -/ in. outdoor exhaust accelerator, required when used with, 070 and 090 input models. Accelerator is not used with 0 or 5 input models. Manifold Pressure in. w.g ft ft ft ft ,000 ft. 4 Termination Kits 0G8, 44W9, 44W9, 5W and 8J0 are certified to ULC S66 standard for use in Canada only. Supply Line Pressure in. w.g. 0-0,000 ft. Natural LPG/Propane Min. Max. EL95UHE / Page 9

10 VENT LENGTHS - FEET STANDARD TERMINATION AT ELEVATION ft. Pipe Size in. -/ in. in. 00/ / / Input No. of 90 ELL N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A STANDARD TERMINATION ELEVATION 450-0,000 ft. Pipe Size in. -/ in. in. Input 00/ / / N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A No. of N/A N/A N/A ELL N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A CONCENTRIC TERMINATION AT ELEVATION ft. Pipe Size in. -/ in. in. Input 00/ / / N/A N/A N/A N/A N/A N/A N/A N/A N/A No. of N/A N/A N/A ELL N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A CONCENTRIC TERMINATION ELEVATION 450-0,000 ft. Pipe Size in. -/ in. in. Input 00/ / / No. of 90 ELL N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A EL95UHE / Page 0

11 VENT LENGTHS - UNINSULATED EXHAUST PIPE IN UNCONDITIONED SPACE Winter Vent Pipe Design Diameter Temperatures to F 0 to F 0 to 0 F PVC Unit Input Size PolyPro InnoFlue PVC PolyPro InnoFlue Maximum Un-Insulated Exhaust Vent Length (ft.) PVC PolyPro InnoFlue PVC PolyPro InnoFlue PVC PolyPro InnoFlue PVC PolyPro InnoFlue in N/A N/A -/ in. N/A N/A 4 N/A 4 N/A 56 N/A N/A N/A in in N/A N/A -/ in. 5 N/A 5 N/A N/A 4 N/A 4 N/A N/A N/A in. N/A N/A N/A N/A in. 4 N/A 5 N/A N/A N/A -/ in. N/A N/A N/A N/A 7 N/A 5 N/A N/A N/A N/A in. N/A N/A N/A N/A N/A N/A NOTE - Concentric terminations are equivalent to 5 ft. of straight pipe and should be included when measuring total pipe length. Refer to 99% Minimum Design Temperature table provided in the current edition of the ASHRAE Handbook-Fundamentals. PolyPro poly-propylene vent pipe is a registered trademark of DuraVent. Innoflue is a registered trademark of Centrotherm Eco Systems. EL95UHE / Page

12 BLOWER DATA EL95UH00XE4B AND EL95UHXE4B PERFORMANCE (Less Filter) External Air Volume / Watts at Various Blower Speeds Static High Medium-High Medium Medium-Low Low Pressure in. w.g. cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts EL95UHXE6B PERFORMANCE (Less Filter) External Air Volume / Watts at Various Blower Speeds Static High Medium-High Medium Medium-Low Low Pressure in. w.g. cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts N/A N/A N/A N/A EL95UH070XE6B PERFORMANCE (Less Filter) External Air Volume / Watts at Various Blower Speeds Static High Medium-High Medium Medium-Low Low Pressure in. w.g. cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts N/A N/A EL95UH090XE48C PERFORMANCE (Less Filter) External Static Pressure in. w.g. EL95UHE / Page Air Volume / Watts at Various Blower Speeds High Medium-High Medium Medium-Low Low cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts N/A N/A

13 BLOWER DATA EL95UH0XE60C PERFORMANCE (Less Filter) Bottom Return Air, Side Return Air with Return Air from External Both Sides or Return Air from Bottom and One Side. Static Pressure in. w.g. Air Volume / Watts at Different Blower Speeds Single Side Return Air Air volumes in bold require Optional Return Air Base and field fabricated transition to accommodate 0 x 5 x in. air filter in order to maintain proper air velocity. High Med-High Medium Med-Low Low High Med-High Medium Med-Low Low cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts EL95UH5XE60D PERFORMANCE (Less Filter) Bottom Return Air, Side Return Air with Return Air from External Both Sides or Return Air from Bottom and One Side. Static Pressure in. w.g. Air Volume / Watts at Different Blower Speeds Single Side Return Air Air volumes in bold require Optional Return Air Base and field fabricated transition to accommodate 0 x 5 x in. air filter in order to maintain proper air velocity. High Med-High Medium Med-Low Low High Med-High Medium Med-Low Low cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts cfm Watts N/A N/A N/A N/A N/A N/A N/A N/A EL95UHE / Page

14 DIMENSIONS - INCHES (MM) - UPFLOW POSITION NOTE - 60C and 60D size units that require air volumes over 800 cfm must have one of the following:. Single side return air and Optional Return Air Base with transition that must accommodate required 0 x 5 x inch (508 x 65 x 5 mm) air filter to maintain proper velocity.. Bottom return air.. Return air from both sides. 4. Bottom and one side return air. See Blower Performance Tables for additional information. Optional Side Return Air Filter Kit is not for use with the Optional Return Air Base. -7/8 (48) D -/4 (8) EXHAUST OUTLET SUPPLY OPENING Flue Condensate Trap Assembly Furnished for external field installation on either side of unit. (See installation instructions for additional information.) 7 (78) COMBUSTION INTAKE OPTIONAL SIDE RETURN FILTER KIT (Either Side) -/4 (60) 5 (65) TOP VIEW A B 9/6 (4) -/ (8) Front Panel 7-/4 (705) 9-7/6 (494) 9/6 (4) OPTIONAL SIDE RETURN FILTER KIT (Either Side) 4-/4 (75) 6 (406) (88) 6-9/6 (67) Left 9 (9) Right -5/8 () (Either Side) ELECTRICAL INLET (Either Side) (5) (Either Side) GAS PIPING INLET (Either Side) CONDENSATE TRAP CONNECTION (Either Side) 6-/ (65) (Either Side) (584) Side Return Air Opening (Either Side) 4 (56) -/ (8) FLOW -5/6 (49) /4 (9) C Bottom Return Air Opening /4 (9) 5/8 (6) -/4 (8) -/ (597) Bottom Return Air Opening FRONT VIEW SIDE VIEW Model No. EL95UH00XE4B EL95UHXE4B EL95UHXE6B EL95UH070XE6B EL95UH090XE48C EL95UH0XE60C A B C D in. mm in. mm in. mm in. mm 7-/ / / / / /8 8 EL95UH5XE60D 4-/ 6 -/ /8 8 EL95UHE / Page 4

15 DIMENSIONS - INCHES (MM) - HORIZONTAL POSITION LEFT-HAND DISCHARGE 6-/ (65) Bottom -5/8 () Bottom 6-9/6 (67) Top 9 (9) Bottom CONDENSATE TRAP CONNECTION (Bottom) FLOW ELECTRICAL INLET (Top or Bottom) 7-/4 (705) 9/6 (4) COMBUSTION INTAKE (5) Top or Bottom TOP VIEW (88) GAS PIPING INLET (Top or Bottom) -/ (8) Front Panel /4 (9) 7-/4 (705) 9/6 (4) 9-7/6 (494) SUPPLY OPENING B D A FLOW -/4 (95) A C -/ (59) RETURN OPENING EXHAUST OUTLET END VIEW -/4 (8) -7/8 (48) FRONT VIEW RIGHT-HAND DISCHARGE END VIEW CONDENSATE TRAP CONNECTION (Bottom) FLOW 6-/ (65) Bottom -5/8 () Bottom 9 (9) Top 6-9/6 (67) Bottom (5) Top or Bottom 7-/4 (705) ELECTRICAL INLET (Top or Bottom) -/ (8) Front Panel TOP VIEW (88) GAS PIPING INLET (Top or Bottom) EXHAUST OUTLET -7/8 (48) -/4 (8) 7-/4 (705) -/ (59) RETURN OPENING C -/4 (95) A FLOW A D 9-7/6 (494) SUPPLY OPENING B 9/6 (4) END VIEW /4 (9) FRONT VIEW COMBUSTION INTAKE END VIEW 9/6 (4) Model No. EL95UH00XE4B EL95UHXE4B EL95UHXE6B EL95UH070XE6B EL95UH090XE48C EL95UH0XE60C A B C D in. mm in. mm in. mm in. mm 7-/ / / / / /8 8 EL95UH5XE60D 4-/ 6 -/ /4 48 EL95UHE / Page 5

16 OPTIONAL ACCESSORY DIMENSIONS - INCHES (MM) HORIZONTAL (END) FILTER KIT 5/8 (6) 4 /4 (69) -/4 () A 5/8 (6) B RETURN OPENING / (597) 5/8 (6) FLOW Furnace Cabinet Width Catalog Number A B in. mm in. mm B 87L /4 45 C 87L /4 476 D 87L /4 60 5/8 (6) SIDE VIEW FILTER (Furnished) FRONT VIEW CONDENSATE TRAP Optional Return Air Base (Upflow Applications Only - For use with B, C and D cabinets) FURNACE FRONT INDOOR QUALITY CABINET (PCO, Filter Cabinet, etc.) IF BASE IS USED WITHOUT IAQ CABINET, A SINGLE RETURN PLENUM MUST COVER BOTH UNIT AND RETURN BASE OPENINGS -/4 (8) 7-/4 (84) (584) Overall (Maximum) Unit side return air Opening 5-5/8 (4) Minimum (79) Maximum 4 (56) SIDE RETURN OPENINGS (Either Side) -7/6 (570) Overall (Maximum) 7-/ (446) B Width (50W98) (5) C Width (50W99) 4-/ (6) D Width (5W00) OPTIONAL RETURN BASE (584) 6-7/8 (68) SIDE VIEW /4 (9) NOTE- Optional Side Return Air Filter Kits are not for use with Optional Return Air Base. Both the unit return air opening and the base return air opening must be covered by a single plenum or IAQ cabinet. Minimum unit side return air opening dimensions for units requiring 800 cfm or more of air (W x H): x in. (584 x 79 mm). The opening can be cut as needed to accommodate plenum or IAQ cabinet while maintaining dimensions shown. Side return air openings must be cut in the field. There are cutting guides stenciled on the cabinet for the side return air opening. The size of the opening must not extend beyond the markings on the furnace cabinet. To minimize pressure drop, the largest opening height possible, up to 4 in. (56 mm), is preferred. EL95UHE / Page 6

17 DIMENSIONS - INCHES (MM) - FURNACE/COIL COMBINED DIMENSIONS UPFLOW POSITION Model No C5/C7/CX5/CX8 Cased C5 Uncased A B A B C5/CX5 C7 CX8 in. mm in. mm in. mm in. mm C5/CX5-8/4A C5/CX5-8/4B C5/CX5-4A C5/CX5-4B C5/CX5-0A C5/CX5-0B C7-5A C7-5B / / 57 4-/ /8 97 CX8-5A CX8-5B 8-/ / 08 6-/ / CX8-0A 0-/ 5 5-/ C7-A C7-B C5/CX5-0/6A C7-6A C5/CX5-0/6B C7-6B C5/CX5-0/6C C7-6C C5/CX5-6A C5/CX5-6B C7-8A C7-8B CX8-A CX8-B CX8-6A CX8-6B CX8-6C CX8-8A CX8-8B -/ / 40 0-/ / / 6 57-/ 46 -/ / / 6 57-/ 46 -/ / C7-4B CX8-4B 4-/ 6 57-/ C5/CX5-48B C5/CX5-48C C7-4B C7-4C C7-48B C7-48C CX8-4B CX8-4C CX8-44/48B CX8-44/48C 7-/ / 57 6-/ / / 6 57-/ C5/CX5-49C C7-49C CX8-49C 9-/ / / 74 6-/ 56 C5/CX5-50/60C C7-50/60C CX8-50/60C 7-/ / / / C7-60D CX8-60D 5-/ / CX5-60C C7-6C CX8-6C -/ / / /8 66 CX5-60D C7-6D CX8-6D 9-/ / A (88) B A B (88) HORIZONTAL POSITION Model A B Number in. mm in. mm CH CH-8A-F -/ / 84 CH-4/0A-F, CH-4B-F, 6-/ / 5 CH-6A-F, CH-6B-F, CH-48C-F, CH-60D-F CH-6C-F, CH-44/48B-F, CH-6D-F -/ / 68 CH-50/60C-F, CH5 CH5-8A-F, CH5-4A-F, CH5-4B-F, CH5-0B-F, CH5-0A-F, CH5-4B-F, CH5-48B-F, CH5-6A-F, CH5-6B-F, CH5-6C-F, CH5-4C-F, CH5-48C-F CH5-5C-F, CH5-60D-F 6-/ / 5 -/ / 68 EL95UHE / Page 7

18 OPTIONAL ACCESSORY DIMENSIONS - INCHES (MM) FLUSH-MOUNT VENT TERMINATION KIT 5W (US) or 5W (CANADA) With or -/ in. (5 or 64 mm) PVC pipe Exhaust Intake (Behind Plate) Seal all openings (typical) With in. (76 mm) PVC pipe Exhaust Intake (Behind Plate) -/8 (60) (05) minimum (recommended) (5) PVC pipe (76) PVC pipe NOTE - PVC pipe and fittings are not furnished When required Use and must be field furnished. Field Provided -/ to in. (64 to 5 mm) Coupling -/ (64) PVC pipe MUFFLERS 5Y66 - -inch 6A56 - -inch -Inch - 8-/4 (476) -Inch - 5 (65) 4-/ (4) (Installed Vertically in the Exhaust Pipe) NOTE - Two-inch mufflers do not have reducers at each end. EL95UHE / Page 8

19 OPTIONAL ACCESSORY DIMENSIONS - INCHES (MM) CONCENTRIC WALL TERMINATION APPLICATIONS CONCENTRIC ROOF TERMINATION APPLICATIONS EXHAUST OUTSIDE WALL INTAKE EXHAUST (05) Minimum Above Average Snow Accumulation FLASHING (Not Furnished) INTAKE CLAMP (Not Furnished) INTAKE (05) Minimum Above Grade or Average Snow Accumulation CLAMP SHEET METAL STRAP (Clamp and sheet metal strap must be field installed to support the weight of the termination kit.) GRADE ELBOW (Field Supplied) 7M80 / 69M9 / 44W9 inch kits 60L46 / 44W9 inch kits See Installation Instructions for additional information. Note - Field provided reducer may be required to adapt larger vent pipe size to termination. A B / (89) in. kits 4 / (4) in. kits TERMINATION ASSEMBLY (Furnished) 6 / (65) INTAKE 6 (5) EXHAUST Outdoor Exhaust Accelerator included with 7M80/44W9 Cat. No. 7M80 69M9 44W9 (Canada) A B in. mm in. mm / / / 94 60L46 8 7/8 987 / W9 (Canada) 6 / / 495 NOTE Typical illustration for dimensions only. Design may vary depending on kit ordered. WALL ASSEMBLY TERMINATION KIT RING KIT 5F74 inch (5 mm) See Installation Instructions for additional information. Note - Field provided reducer may be required to adapt larger vent pipe size to termination. DIRECT VENT APPLICATION NON-DIRECT VENT APPLICATION NOTE - EXHAUST PIPE SHOWN Kit Contains Enough Parts For Two Installations in. (05 mm) - in. (5 mm) dia. exhaust pipe 0 in. (508 mm) - in. (76 mm) dia. exhaust pipe maximum length without support in. (05 mm) - in. (5 mm) dia. exhaust pipe 0 in. (508 mm) - in. (76 mm) dia. exhaust pipe maximum length without support 8 in. (0 mm) minimum 6 in. (5 mm) maximum NOTE in. (05 mm) minimum height above average snow accumulation (from bottom of vent pipe). NOTE in. (05 mm) minimum height above average snow accumulation (from bottom of vent pipe). EL95UHE / Page 9

20 OPTIONAL ACCESSORY DIMENSIONS - INCHES (MM) WALL TERMINATION KITS (CLOSE-COUPLE) EXTENDED VENT FOR GRADE CLEARANCE inch (5 mm) G44 (US) inch (76 mm) 44J40 (US) See Installation Instructions for additional information. Note - Field provided reducer may be required to adapt larger vent pipe size to termination. If Intake and Exhaust Pipe is less than in. (05 mm) above snow accumulation or other obstructions, field fabricated piping must be installed. WALL SUPPORT 8 (0) MIN. Between Ends of Exhaust and Intake Pipe (05) MAX. for (5) Dia. Exhaust 0 (508) MAX. for (76) Dia. Exhaust (05) INTAKE 6 (5) Maximum EXHAUST INTAKE 5 (7) / () FOAM INSULATION (Field Furnished) EXHAUST 8 (0) MIN. (05) Minimum Above Grade or Average Snow Accumulation GRADE 5-/ (40) (05) Minimum Above Grade or Average Snow Accumulation GRADE (05) MAX. for (5) Dia. Exhaust 0 (508) MAX. for (76) Dia. Exhaust WALL TERMINATION KITS (CLOSE-COUPLE) EXTENDED VENT FOR GRADE CLEARANCE inch (5 mm) 0G8 (WTK Canada) inch (76 mm) 8J0 (WTK Canada) See Installation Instructions for additional information. Note - Field provided reducer may be required to adapt larger vent pipe size to termination. If Intake and Exhaust Pipe is less than in. (05 mm) above snow accumulation or other obstructions, field fabricated piping must be installed. WALL SUPPORT INTAKE 6 (5) Maximum (05) MAX. for (5) Dia. Exhaust 0 (508) MAX. for (76) Dia. Exhaust 6 (5) MIN. EXHAUST INTAKE 5 (7) (05) / () FOAM INSULATION (Field Furnished) EXHAUST 6 (5) MIN. (05) Minimum Above Grade or Average Snow Accumulation GRADE (05) MAX. for (5) Dia. Exhaust 0 (508) MAX. for (76) Dia. Exhaust 5-/ (40) (05) Minimum Above Grade or Average Snow Accumulation GRADE EL95UHE / Page 0

21

22

23

24 REVISIONS Sections Gas Heat Accessories Description of Change Updated High Pressure Switch Kit catalog numbers for all units. Visit us at For the latest technical information, Contact us at LENNOX NOTE - Due to Lennox ongoing commitment to quality, Specifications, Ratings and Dimensions subject to change without notice and without incurring liability. Improper installation, adjustment, alteration, service or maintenance can cause property damage or personal injury. Installation and service must be performed by a qualified installer and servicing agency. 08 Lennox Industries, Inc.

MERIT SERIES Downflow

MERIT SERIES Downflow PRODUCT SPECIFICATIONS GAS FURNACES ML95DF MERIT SERIES Downflow Bulletin No. 06 February 08 Supersedes November 07 MODEL NUMBER IDENTIFICATION AFUE - 95% Input - 44,000 to 0,000 Btuh Nominal Add-on Cooling

More information

ELITE SERIES Downflow - High Efficiency Blower Motor

ELITE SERIES Downflow - High Efficiency Blower Motor PRODUCT SPECIFICATIONS GAS FURNACES EL80DFE ELITE SERIES Downflow - High Efficiency Blower Motor Bulletin No. 2066 July 208 Supersedes February 208 AFUE - 80% Input - 44,000 to 0,000 Btuh Nominal Add-on

More information

MERIT SERIES Upflow / Horizontal

MERIT SERIES Upflow / Horizontal PRODUCT SPECIFICATIONS GAS FURNACES ML95UH MERIT SERIES Upflow / Horizontal Bulletin No. 059 March 08 Supersedes February 08 AFUE - 95% Input - 44,000 to,000 Btuh Nominal Add-on Cooling - to 5 Tons MODEL

More information

MERIT SERIES Downflow

MERIT SERIES Downflow PRODUCT SPECIFICATIONS GAS FURNACES ML80DF MERIT SERIES Downflow Bulletin No. 20643 February 208 Supersedes November 207 AFUE - 80% Input - 44,000 to 0,000 Btuh Nominal Add-on Cooling -.5 to 5 Tons MODEL

More information

G61MP. ELITE Series Multi-Position - Two-Stage Heat. AFUE - Up to 95% Input - 44,000 to 132,000 Btuh Nominal Add-on Cooling - 2.

G61MP. ELITE Series Multi-Position - Two-Stage Heat. AFUE - Up to 95% Input - 44,000 to 132,000 Btuh Nominal Add-on Cooling - 2. P R O D U C T S P E C I F I C AT I O N S G A S F U R N A C E S G6MP ELITE Series Multi-Position - Two-Stage Heat Bulletin No. 038 August 009 Supersedes December 008 AFUE - Up to 95% Input - 44,000 to 3,000

More information

G61MP. ELITE SERIES Multi Position Two Stage Heat G A S F U R N A C E S. AFUE 94.1% Input 44,000 to 132,000 Btuh Nominal Add on Cooling 2.

G61MP. ELITE SERIES Multi Position Two Stage Heat G A S F U R N A C E S. AFUE 94.1% Input 44,000 to 132,000 Btuh Nominal Add on Cooling 2. G A S F U R N A C E S G61MP ELITE SERIES Multi Position Two Stage Heat E N G I N E E R I N G D A T A Bulletin No. 210382 September 2006 Supersedes August 2006 AFUE 94.1% Input 44,000 to 132,000 Btuh Nominal

More information

MERIT SERIES Downflow

MERIT SERIES Downflow PRODUCT SPECIFICATIONS GAS FURNACES ML9DF MERIT SERIES Downflow Bulletin No. 0589 March 09 Supersedes September 08 AFUE - 9% Input - 44,000 to 0,000 Btuh Nominal Add-on Cooling - to 5 Tons MODEL NUMBER

More information

SL280DFV. DAVE LENNOX SIGNATURE COLLECTION Downflow - Two-Stage Heat - Variable Speed Blower

SL280DFV. DAVE LENNOX SIGNATURE COLLECTION Downflow - Two-Stage Heat - Variable Speed Blower P R O D U C T S P E C I F I C AT I O N S G A S F U R N A C E S SL280DFV DAVE LENNOX SIGNATURE COLLECTION Downflow - Two-Stage Heat - Variable Blower Bulletin No. 20576 December 200 Supersedes July 200

More information

ELITE SERIES Upflow / Horizontal - High Efficiency Blower Motor

ELITE SERIES Upflow / Horizontal - High Efficiency Blower Motor PRODUCT SPECIFICTIONS GS FURNCES EL80UHE ELITE SERIES Upflow / Horizontal - High Efficiency Blower Motor Bulletin No. 20660 February 208 Supersedes January 208 FUE - 80% Input - 44,000 to 32,000 Btuh Nominal

More information

DuralokPlus Aluminized Steel Heat Exchanger G 32 V

DuralokPlus Aluminized Steel Heat Exchanger G 32 V ENGINEERING DATA GAS FURNACES G32V DAVE LENNOX SIGNATURE COLLECTION Up Flow Two Stage Heat Variable Speed Blower AFUE up to 94.2% Input 75,000 to 125,000 Btuh (22.0 to 36.6 kw) Add on Cooling 2 to 5 Tons

More information

DAVE LENNOX SIGNATURE COLLECTION Upflow / Horizontal - Variable Capacity - Variable Speed Blower

DAVE LENNOX SIGNATURE COLLECTION Upflow / Horizontal - Variable Capacity - Variable Speed Blower PRODUCT SPECIFICATIONS GAS FURNACES SLP98UHV DAVE LENNOX SIGNATURE COLLECTION Upflow / Horizontal - Variable Capacity - Variable Speed Blower Bulletin No. 20577 March 208 Supersedes February 208 MODEL

More information

ML 1 80 UH 070 X E 36 B

ML 1 80 UH 070 X E 36 B PRODUCT SPECIFICTIONS GS FURNCES ML80UHE MERIT SERIES Upflow / Horizontal - High Efficiency Blower Motor Bulletin No. 2063 ugust 202 Supersedes January 202 FUE - 80% Input - 44,000 to 32,000 Btuh Nominal

More information

ML180UH. MERIT SERIES Upflow / Horizontal. AFUE - 80% Input - 44,000 to 132,000 Btuh Nominal Add-on Cooling - 2 to 5 Tons ML 1 80 UH 070 X P 36 B

ML180UH. MERIT SERIES Upflow / Horizontal. AFUE - 80% Input - 44,000 to 132,000 Btuh Nominal Add-on Cooling - 2 to 5 Tons ML 1 80 UH 070 X P 36 B E N G I N E E R I N G D T G S F U R N C E S ML80UH MERIT SERIES Upflow / Horizontal Bulletin No. 20590 June 20 Supersedes May 20 FUE - 80% Input - 44,000 to 32,000 Btuh Nominal dd-on Cooling - 2 to 5 Tons

More information

8+* Bulletin No November 1997

8+* Bulletin No November 1997 ENGINEERING DATA VALUE 80Z UP-FLOW/HORIZONTAL GAS FURNACES *80.0 to 80.5% A.F.U.E. 45,000 to 20,000 Btuh (3.2 to 32.2 kw) Input Heating Capacity -/2 thru 6 Tons (3.5 thru 2. kw) Nominal Add-on Cooling

More information

MERIT SERIES Upflow / Horizontal

MERIT SERIES Upflow / Horizontal PRODUCT SPECIFICTIONS GS FURNCES ML80UH MERIT SERIES Upflow / Horizontal Bulletin No. 20590 February 208 Supersedes November 207 FUE - 80% Input - 44,000 to 32,000 Btuh Nominal dd-on Cooling - 2 to 5 Tons

More information

ML 1 93 UH 070 x P 36 B

ML 1 93 UH 070 x P 36 B PRODUCT SPECIFICTIONS GS FURNCES ML93UH MERIT SERIES Upflow / Horizontal Bulletin No. 20588 October 202 Supersedes ugust 202 FUE - 93% Input - 44,000 to 32,000 Btuh Nominal dd-on Cooling - 2 to 5 Tons

More information

G71MPP WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature

G71MPP WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature Service Literature Corp. 0804 L2 Revised 05 05 2008 G71MPP G71MPP SERIES UNITS G71MPP series units are high efficiency multi position (upflow, downflow, horizontal right and left) gas furnaces equipped

More information

DAVE LENNOX SIGNATURE COLLECTION Upflow / Horizontal - Two-Stage Heat - Variable Speed Blower

DAVE LENNOX SIGNATURE COLLECTION Upflow / Horizontal - Two-Stage Heat - Variable Speed Blower PRODUCT SPECIFICATIONS GAS FURNACES SL80UHV DAVE LENNOX SIGNATURE COLLECTION Upflow / Horizontal - Two-Stage Heat - Variable Blower Bulletin No. 0600 February 08 Supersedes November 07 MODEL NUMBER IDENTIFICATION

More information

MERIT SERIES Up Flow / Horizontal

MERIT SERIES Up Flow / Horizontal G S F U R N C E S G40UH MERIT SERIES Up Flow / Horizontal E N G I N E E R I N G D T Bulletin No. 210278 December 2008 Supersedes May 2007 FUE 80% Input 44,000 to 154,000 Btuh Nominal dd on Cooling 1.5

More information

DAVE LENNOX SIGNATURE COLLECTION Downflow - Two-Stage Heat - Variable Speed Blower

DAVE LENNOX SIGNATURE COLLECTION Downflow - Two-Stage Heat - Variable Speed Blower PRODUCT SPECIFICATIONS GAS FURNACES SL80DFV DAVE LENNOX SIGNATURE COLLECTION Downflow - Two-Stage Heat - Variable Blower Bulletin No. 060 November 07 Supersedes August 05 MODEL NUMBER IDENTIFICATION SL

More information

MERIT SERIES Upflow / Horizontal

MERIT SERIES Upflow / Horizontal PRODUCT SPECIFICTIONS GS FURNCES ML9UH MERIT SERIES Upflow / Horizontal Bulletin No. 0588 March 08 Supersedes February 08 FUE - 9% Input - 44,000 to,000 Btuh Nominal dd-on Cooling - to 5 Tons MODEL NUMBER

More information

ELITE SERIES Upflow / Horizontal - Two-Stage Heat

ELITE SERIES Upflow / Horizontal - Two-Stage Heat PRODUCT SPECIFICTIONS GS FURNCES EL280UH ELITE SERIES Upflow / Horizontal - Two-Stage Heat ulletin No. 2063 June 205 Supersedes January 205 FUE - 80% Input - 66,000 to 32,000 tuh Nominal dd-on Cooling

More information

AFUE - 80% Input - 44,000 to 132,000 Btuh Nominal Add-on Cooling to 5 Tons GAS FURNACES ML180UHE

AFUE - 80% Input - 44,000 to 132,000 Btuh Nominal Add-on Cooling to 5 Tons GAS FURNACES ML180UHE PRODUCT SPECIFICTIONS GS FURNCES ML80UHE MERIT SERIES Upflow / Horizontal - High Efficiency lower Motor ulletin No. 20825 July 208 Supersedes February 208 FUE - 80% Input - 44,000 to 32,000 tuh Nominal

More information

MERIT SERIES Upflow / Horizontal

MERIT SERIES Upflow / Horizontal PRODUCT SPECIFICTIONS GS FURNCES ML9UH MERIT SERIES Upflow / Horizontal Bulletin No. 0588 May 05 Supersedes January 05 FUE - 9% Input - 44,000 to,000 Btuh Nominal dd-on Cooling - to 5 Tons MODEL NUMBER

More information

13 GEP A L P - 1 A

13 GEP A L P - 1 A PRODUCT SPECIFICATIONS PACKAGED GAS / ELECTRIC 3GEP MERIT SERIES Residential - R-40A Bulletin No. 20602 December 202 Supersedes October 202 SEER - 3.00 AFUE - 80% 2 to 5 Tons Cooling Capacity - 22,800

More information

AFUE 95% Heating Input 50,000 to 200,000 Btuh

AFUE 95% Heating Input 50,000 to 200,000 Btuh PRODUCT SPECIFICATIONS WATER HEATERS / BOILERS GWM-IE Gas-Fired, Modulating, Condensing, Wall Hung Hot Water Boiler Bulletin No. 210650 March 2018 Supersedes December 2015 AFUE 95% Heating Input 50,000

More information

ELITE SERIES Downflow - Two-Stage Heating - Variable Speed Blower

ELITE SERIES Downflow - Two-Stage Heating - Variable Speed Blower PRODUCT SPECIFICATIONS GAS FURNACES EL96DFV ELITE SERIES Downflow - Two-Stage Heating - Variable Speed Blower Bulletin No. 060 March 09 Supersedes September 08 MODEL NUMBER IDENTIFICATION EL 96 DF 070

More information

SLP98UHV WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature

SLP98UHV WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature Service Literature Corp. 1029 L7 SLP98UHV SLP98UHV SERIES UNITS SLP98UHV series units are high efficiency upflow, horizontal right and left) gas furnaces equipped with variable capacity gas valve, variable

More information

T-CLASS GAS-FIRED UNIT HEATERS Separated Combustion - Direct Vent - Horizontal - 60 HZ. Thermal Efficiency - up to 82% Input - 40,000 to 300,000 Btuh

T-CLASS GAS-FIRED UNIT HEATERS Separated Combustion - Direct Vent - Horizontal - 60 HZ. Thermal Efficiency - up to 82% Input - 40,000 to 300,000 Btuh PRODUCT SPECIFICATIONS GAS UNIT HEATERS / DUCT FURNACES TU T-CLASS GAS-FIRED UNIT HEATERS Separated Combustion - Direct Vent - Horizontal - 60 HZ Bulletin No. 20402 November 207 Supersedes November 206

More information

G60UH(X) WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature

G60UH(X) WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature Service Literature Corp. 0204 L2 Revised 11 2006 G60UH(X) G60UH(X) SERIES UNITS G60UH(X) series units are mid efficiency gas furnaces used for upflow or horizontal applications only, manufactured with

More information

ELITE SERIES Lo-Boy. AFUE - 83% Heating Input - 101,000 to 151,000 Btuh Nominal Add-on Cooling to 5 Ton. OIL FURNACES El0183b

ELITE SERIES Lo-Boy. AFUE - 83% Heating Input - 101,000 to 151,000 Btuh Nominal Add-on Cooling to 5 Ton. OIL FURNACES El0183b PRODUCT SPECIFICATIONS OIL FURNACES El083b ELITE SERIES Lo-Boy Bulletin No. 20629 February 209 Supersedes July 202 MODEL NUMBER IDENTIFICATION el O 83 bf 0/4 p 60 AFUE - 83% Heating Input - 0,000 to 5,000

More information

ML180UHT (ce) MERIT SERIES Upflow / Horizontal 50HZ. Net Input to 34.8 kw Nominal Add-on Cooling to 17.

ML180UHT (ce) MERIT SERIES Upflow / Horizontal 50HZ. Net Input to 34.8 kw Nominal Add-on Cooling to 17. PRODUCT SPECIFICTIONS GS FURNCES ML80UHT (ce) MERIT SERIES Upflow / Horizontal 50HZ ulletin Number 49060 June 205 Supersedes June 203 Net Input - 7.4 to 34.8 kw Nominal dd-on Cooling - 0.6 to 7.6 kw MODEL

More information

RGE 13 A T - 1 A

RGE 13 A T - 1 A PRODUCT SPECIFICATIONS PACKAGED GAS / ELECTRIC 3GEP / RGE3 Rooftop Units 60HZ Bulletin No. 2063 December 202 Supersedes October 202 MODEL NUMBER IDENTIFICATION -PHASE MODELS SEER - 3.00 (3GEP Shown) AFUE

More information

GSR21Q PULSE21 SERIES

GSR21Q PULSE21 SERIES GSR21Q PULSE21 SERIES ENGINEERING DATA HORIZONTAL/DOWN-FLOW GAS FURNACES HORIZONTAL UNIT HEATERS AND DOWN-FLOW MOBILE HOME UNITS *91.7% to 95.3% A.F.U.E. 50,000 to 100,000 Btuh (14.7 to 29.3 kw) Input

More information

GAS FURNACES G20RE/ G20RXE EXISTING NEG ENGINEERING DATA EXISTING NEG. Typical Applications

GAS FURNACES G20RE/ G20RXE EXISTING NEG ENGINEERING DATA EXISTING NEG. Typical Applications ENGINEERING DATA Typical Applications G20RE and G20RXE WhisperHeat DOWN-FLO GAS FURNACES *78.0% A.F.U.E. 50,000 to 150,000 Btuh Input Add-On Cooling 2 thru 5 Nominal Tons *Isolated Combustion System rating

More information

COMPACT UNIT HEATERS Low Profile - Horizontal - 60 HZ. Steady-State Efficiency - up to 81% Input - 30,000 to 75,000 Btuh

COMPACT UNIT HEATERS Low Profile - Horizontal - 60 HZ. Steady-State Efficiency - up to 81% Input - 30,000 to 75,000 Btuh GAS UNIT HEATERS / DUCT FURNACES LF24 COMPACT UNIT HEATERS Low Profile - Horizontal - 60 HZ PRODUCT SPECIFICATIONS Bulletin 2008 July 206 Supersedes October 20 Steady-State Efficiency - up to 8% Input

More information

GSR21Q GAS FURNACES EXISTING NEG EXISTING NEG ENGINEERING DATA HORIZONTAL POSITION. Typical Applications DOWN-FLO POSITION

GSR21Q GAS FURNACES EXISTING NEG EXISTING NEG ENGINEERING DATA HORIZONTAL POSITION. Typical Applications DOWN-FLO POSITION ENGINEERING DATA GSR21Q PULSE21 SERIES HORIZONTAL/DOWN-FLO GAS FURNACES HORIZONTAL UNIT HEATERS AND DOWN-FLO MOBILE HOME UNITS *91.7% to 95.3% A.F.U.E. 50,000 to 100,000 Btuh Input Add-On Cooling 1-1/2

More information

G60UH(X) WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature

G60UH(X) WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature Service Literature Corp. 0204 L2 Revised 09 2006 G60UH(X) G60UH(X) SERIES UNITS G60UH(X) series units are mid efficiency gas furnaces used for upflow or horizontal applications only, manufactured with

More information

DAVE LENNOX SIGNATURE COLLECTION Lo-Boy - Variable Speed Blower

DAVE LENNOX SIGNATURE COLLECTION Lo-Boy - Variable Speed Blower PRODUCT SPECIFICATIONS OIL FURNACES sl085bv DAVE LENNOX SIGNATURE COLLECTION Lo-Boy - Variable Speed Blower Bulletin No. 0677 August 05 Supersedes September 04 AFUE - Up to 87% Heating Input - 79,000 to

More information

G34M Bulletin #69/ August 2003

G34M Bulletin #69/ August 2003 ENGINEERING DATA G34M MULTI POSITION GAS FURNACE 12.4 to 31.0 kw Output 52.7 to 131.9 Mj Input 3.5 to 17.6 kw Nominal Add-on Cooling GAS FURNACES 50 Hz G34M Bulletin #69/490045 August 2003 Typical Applications

More information

G60UHV(X) WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature

G60UHV(X) WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature Service Literature Corp. 0124 L11 Revised 11 2006 G60UHV(X) G60UHV(X) SERIES UNITS G60UHV(X) series units are mid efficiency gas furnaces used for upflow or horizontal applications only, manufactured with

More information

OHR23. ELITE SERIES Horizontal/Downflow. AFUE - Up to 83.5% Input - 105,000 to 154,000 Btuh Nominal Add-on Cooling - 2 to 5 Tons O HR 23 Q 3/4-105/120

OHR23. ELITE SERIES Horizontal/Downflow. AFUE - Up to 83.5% Input - 105,000 to 154,000 Btuh Nominal Add-on Cooling - 2 to 5 Tons O HR 23 Q 3/4-105/120 P R O D U C T S P E C I F I C AT I O N S O I L F U R N A C E S OHR23 ELITE SERIES Horizontal/Downflow ulletin No. 20097 February 20 Supersedes October 200 AFUE - Up to 83.5% Input - 05,000 to 54,000 tuh

More information

EL195UH WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. EL195UH SERIES UNITS

EL195UH WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. EL195UH SERIES UNITS Corp. 1101 L1 Service Literature Revised 03/2011 EL195UH EL195UH series units are high efficiency gas furnaces manufactured with Lennox DuralokPlus aluminized steel clamshell type heat exchangers, with

More information

G51MP WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature

G51MP WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature Service Literature Corp. 0307 L5 Revised 11 2006 G51MP SERIES UNITS G51MP G51MP series units are high efficiency multiple position (upflow, downflow, horizontal left and horizontal right) gas furnaces

More information

WATER HEATERS / BOILERS GWB8-E. Gas-Fired Hot Water Boiler PRODUCT SPECIFICATIONS. AFUE up to 83.9% Heating Input 50,000 to 299,000 Btuh

WATER HEATERS / BOILERS GWB8-E. Gas-Fired Hot Water Boiler PRODUCT SPECIFICATIONS. AFUE up to 83.9% Heating Input 50,000 to 299,000 Btuh HEATERS / BOILERS GWB8-E PRODUCT SPECIFICATIONS Gas-Fired Hot Water Boiler Bulletin No. 065 September 0 Supersedes Bulletin No. 06 AFUE up to 83.9% Heating Input 50,000 to 99,000 Btuh MODEL NUMBER IDENTIFICATION

More information

Gas Valve. Combustion Air Intake. Supply Air Blower AM30. Typical Applications

Gas Valve. Combustion Air Intake. Supply Air Blower AM30. Typical Applications ENGINEERING DATA Hot Copper Tube Coil WATER HEATING SPACE HEATING/WATER HEATING SYSTEM CAE 90.0% Space Heating Input 40,000 to 120,000 Btuh (11.7 to 35.2 kw) Heating Input 85,000 to 150, 000 Btuh (24.9

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS TM TECHNICAL SPECIFICATIONS Model PGF1TE 2 Stage Series Upflow/Horizontal M1010 Product Line High Efficiency / 95.1 AFUE Direct Vent or Non Direct Vent Condensing Furnace 10 YEAR WARRANTY WORRY-FREE PERFORMANCE

More information

MERIT Series R-410A - Upflow / Horizontal

MERIT Series R-410A - Upflow / Horizontal PRODUCT SPECIFICATIONS AIR HANDLERS CBX5UH (-0) MERIT Series R-0A - Upflow / Horizontal Bulletin No. 0770 January 07 Supersedes August 06 Nominal Capacity -.5 to 5 Tons Optional Electric Heat -.5 to 0

More information

FG7T (C and L Series)

FG7T (C and L Series) TECHNICAL SPECIFICATIONS FG7T (C and L Series) WARRANTY Smartlite Two Stage, Variable Speed, Condensing Upflow/Horizontal and Downflow Gas Furnaces Induced Draft - 95.1 AFUE Input 60,000-120,000 Btuh The

More information

AFUE up to 83.9% Heating Input 50,000 to 299,000 Btuh

AFUE up to 83.9% Heating Input 50,000 to 299,000 Btuh HEATERS / BOILERS GWB8-E Gas-Fired Hot Water Boiler PRODUCT SPECIFICATIONS Bulletin No. 065 July 06 Supersedes September 05 AFUE up to 83.9% Heating Input 50,000 to 99,000 Btuh MODEL NUMBER IDENTIFICATION

More information

KG6TE Series. High Efficiency / Direct Vent or Non Direct Vent 2-Stage Condensing Gas Furnace with Variable Speed Blower TECHNICAL SPECIFICATIONS

KG6TE Series. High Efficiency / Direct Vent or Non Direct Vent 2-Stage Condensing Gas Furnace with Variable Speed Blower TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS KG6TE Series High Efficiency / Direct Vent or Non Direct Vent 2-Stage Condensing Gas with Variable Speed Blower 95.1 Upflow/Horizontal The high effi ciency 2-Stage gas furnace

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Model PGC2T (C and L) Series SmartStart M1200 Product Line Two Stage, Variable Speed, High Efficiency Upflow/Horizontal and Downflow Gas Furnaces 95.1 AFUE Input 60,000-120,000

More information

WATER HEATERS / BOILERS GSB8-E. Gas-Fired Steam Boiler PRODUCT SPECIFICATIONS. AFUE up to 82.7% Heating Input 75,000 to 299,000 Btuh GSB E

WATER HEATERS / BOILERS GSB8-E. Gas-Fired Steam Boiler PRODUCT SPECIFICATIONS. AFUE up to 82.7% Heating Input 75,000 to 299,000 Btuh GSB E WATER HEATERS / BOILERS -E PRODUCT SPECIFICATIONS Gas-Fired Steam Boiler Bulletin No. 20653 September 202 Supersedes Bulletin No. 20263 AFUE up to 82.7% Heating Input 75,000 to 299,000 Btuh MODEL NUMBER

More information

Product Data. 95% AFUE Single Stage Furnace Upflow / Downflow / Horizontal. ama ! WARNING

Product Data. 95% AFUE Single Stage Furnace Upflow / Downflow / Horizontal. ama ! WARNING DIRECT OR NON -DIRECT VENT 4-WAY MULTIPOISE CONDENSING GAS FURNACE 95% AFUE Single Stage Furnace Upflow / Downflow / Horizontal FLEXIBILITY S Dual certified venting (1 or 2 pipes) Direct Vent furnace S

More information

MERIT Series R-410A - Upflow / Horizontal

MERIT Series R-410A - Upflow / Horizontal PRODUCT SPECIFICATIONS AIR HANDLERS CBX5UH (-0) MERIT Series R-0A - Upflow / Horizontal Bulletin No. 060 March 05 Supersedes November 0 Nominal Capacity -.5 to 5 Tons Optional Electric Heat -.5 to 0 kw

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Model PGF1TA 2 Stage Series Upflow/Horizontal M1010 Product Line High Efficiency / 80+ Upflow/Horizontal 2 Stage Gas Furnace with Variable Speed Blower 2 10 YEAR WARRANTY WORRY-FREE

More information

G41UF WARNING. Service Literature G41UF SERIES UNITS. Table of Contents

G41UF WARNING. Service Literature G41UF SERIES UNITS. Table of Contents Service Literature Corp. 0303 L2 Revised 10 2004 G41UF SERIES UNITS G41UF G41UF series units are high efficiency upflow gas furnaces manufactured with Lennox DuralokPlus aluminized primary and stainless

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Model PGF1RA Series M1010 Product Line High Efficiency / Upflow / Horizontal Gas Furnace Induced Draft - 80+ AFUEurnace 2 10 YEAR WARRANTY WORRY-FREE PERFORMANCE 5 YEAR DEPENDABILITY

More information

Heavy Duty Transformer. Low Voltage Circuit Breaker. Visit us at For the latest technical information,

Heavy Duty Transformer. Low Voltage Circuit Breaker. Visit us at   For the latest technical information, ENGINEERING DT Duralok Plus luminized Steel Heat Exchanger Pressure es Factory installed Field Wiring Make Up Box can be installed on either side Tool Less Entry Sight Glass Terminals for ccessory Connections

More information

KG6RC Series TECHNICAL SPECIFICATIONS FEATURES AND BENEFITS

KG6RC Series TECHNICAL SPECIFICATIONS FEATURES AND BENEFITS TECHNICAL SPECIFICATIONS KG6RC Series High Efficiency / Direct Vent or Non Direct Vent Condensing Upflow/ Horizontal Gas Furnace Induced Draft - 92+ AFUE Input 40,000-120,000 Btuh The high effi ciency

More information

RG7D 1-Stage Heat Series

RG7D 1-Stage Heat Series TECHNICAL SPECIFICATIONS RG7D 1-Stage Heat Series High Efficiency / Direct Vent Condensing Downflow Gas Furnace Induced Draft - 9%+ AFUE Input 4,000 thru 7,000 Btuh The high efficiency downflow gas furnace

More information

GSB8. CONSERVATOR Gas-Fired Steam Boiler. AFUE up to 82.7% Heating Input 75,000 to 299,000 Btuh GSB S MODEL NUMBER IDENTIFICATION FEATURES

GSB8. CONSERVATOR Gas-Fired Steam Boiler. AFUE up to 82.7% Heating Input 75,000 to 299,000 Btuh GSB S MODEL NUMBER IDENTIFICATION FEATURES P R O D U C T S P E C I F I C AT I O N S W A T E R H E A T E R S / B O I L E R S CONSERVATOR Gas-Fired Steam Boiler Bulletin No. 20263 October 200 Supersedes September 2008 AFUE up to 82.7% Heating Input

More information

FG6T(C,L) Series. High Efficiency / Direct Vent or Non Direct Vent 2-Stage Condensing Gas Furnace with Variable Speed Blower TECHNICAL SPECIFICATIONS

FG6T(C,L) Series. High Efficiency / Direct Vent or Non Direct Vent 2-Stage Condensing Gas Furnace with Variable Speed Blower TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS FG6T(C,L) Series High Efficiency / Direct Vent or Non Direct Vent 2-Stage Condensing Gas with Variable Speed Blower 92+ Upflow/Horizontal 90+ Downflow The high effi ciency 2-Stage

More information

LF24. UNIT HEATERS Horizontal - 60 HZ. Thermal Efficiency - up to 80.5% Input - 100,000 to 390,000 Btuh LF A MODEL NUMBER IDENTIFICATION

LF24. UNIT HEATERS Horizontal - 60 HZ. Thermal Efficiency - up to 80.5% Input - 100,000 to 390,000 Btuh LF A MODEL NUMBER IDENTIFICATION E N G I N E E R I N G D ATA G A S U N I T H E A T E R S / D U C T F U R N A C E S LF4 UNIT HEATERS Horizontal - 60 HZ Bulletin. 0000 June 0 Supersedes February 0 Front View Tubular Heat Exchanger Thermal

More information

G6RC Series TECHNICAL SPECIFICATIONS

G6RC Series TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS G6RC Series High Efficiency / Direct Vent or Non Direct Vent Condensing Upflow/ Horizontal Gas Furnace Induced Draft - 92+ AFUE Input 40,000-120,000 Btuh The high effi ciency upfl

More information

AFUE up to 85.2% Heating Input 105,000 to 245,000 Btuh

AFUE up to 85.2% Heating Input 105,000 to 245,000 Btuh WATER HEATERS / BOILERS COWB3 Oil-Fired Hot Water Boiler PRODUCT SPECIFICATIONS Bulletin No. 0654 March 08 Supersedes September 05 AFUE up to 85.% Heating Input 05,000 to 45,000 Btuh MODEL NUMBER IDENTIFICATION

More information

Wt. Lbs Model Number (BTUH) Hz

Wt. Lbs Model Number (BTUH) Hz Up to 96% AFUE, Two Stage ECM Gas Furnace EASIER TO SELL Up to 96% AFUE in upflow and horizontal positions F95% AFUE in downflow position California NOx approved Most models have earned the ENERGY STAR

More information

For More Information Click Here or Call General Supply M7RL Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS

For More Information Click Here or Call General Supply M7RL Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS TECHNICAL SPECIFICATIONS M7RL Series High Efficiency / Direct Vent Condensing Downflow Gas Furnace Induced Draft - 95%+ AFUE Input 45,000 thru 7,000 Btuh The high efficiency downflow gas furnace is especially

More information

Cooling Capacity CFM range

Cooling Capacity CFM range R9MSB Product Specifications 92.1% AFUE, Single Stage, PSC Gas Furnace EASIER TO SELL 92.1% AFUE all models in all positions California NOx approved Cabinet air leakage less than 2.0% at 1.0 in. W.C. and

More information

Submittal. Upflow/ Horizontal Left/Right Two Stage Condensing Gas Fired Furnace 80,000 BTUH S9V2B080U4-SUB-1-EN. February 2016 S9V2B080U4PSAA TAG:

Submittal. Upflow/ Horizontal Left/Right Two Stage Condensing Gas Fired Furnace 80,000 BTUH S9V2B080U4-SUB-1-EN. February 2016 S9V2B080U4PSAA TAG: Submittal Upflow/ Horizontal Left/Right Two Stage Condensing Gas Fired Furnace 80,000 BTUH Upflow, Convertible to Horizontal Right or Horizontal Left S9V2B080U4PSAA Note: Graphics in this document are

More information

Submittal. Upflow/ Horizontal Left/Right Two Stage Condensing Gas Fired Furnace 40,000 BTUH S9V2B040U3-SUB-1-EN. February 2016 S9V2B040U3PSAA TAG:

Submittal. Upflow/ Horizontal Left/Right Two Stage Condensing Gas Fired Furnace 40,000 BTUH S9V2B040U3-SUB-1-EN. February 2016 S9V2B040U3PSAA TAG: Submittal Upflow/ Horizontal Left/Right Two Stage Condensing Gas Fired Furnace 40,000 BTUH Upflow, Convertible to Horizontal Right or Horizontal Left S9V2B040U3PSAA Note: Graphics in this document are

More information

Model GB1AAV UPFLOW GAS FURNACE. Series G SS-GB1A-04 FEATURES

Model GB1AAV UPFLOW GAS FURNACE. Series G SS-GB1A-04 FEATURES SIZES AVAILABLE: 024045 through 060155 EFFICIENCY: The GB1AAV Induced-Combustion Gas Furnace provides the efficiency customers want with 80% Annual Fuel Utilization Efficiency (AFUE). IGNITION: The field-proven

More information

FEATURES. Gas Furnace provides the efficiency customers want with 78% Annual Fuel Utilization Efficiency (AFUE).

FEATURES. Gas Furnace provides the efficiency customers want with 78% Annual Fuel Utilization Efficiency (AFUE). This document was created with FrameMaker 4.0.4 SIZES AVAILABLE: 024065 through 060150 EFFICIENCY: IGNITION: HEAT EXCHANGER: CONTROL BOARD: The GA1A Induced-Combustion Gas Furnace provides the efficiency

More information

M3RL Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. High Efficiency / Direct Vent Condensing Downflow Gas Furnace

M3RL Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. High Efficiency / Direct Vent Condensing Downflow Gas Furnace TECHNICAL SPECIFICATIONS M3RL Series High Efficiency / Direct Vent Condensing Downflow Gas Furnace Induced Draft - 90+ AFUE Input 60,000 & 80,000 Btuh The high efficiency downflow gas furnace is especially

More information

TECHNICAL GUIDE MODELS: P*DH GAS-FIRED CONDENSING / HIGH EFFICIENCY DOWNFLOW / HORIZONTAL FURNACES 91 AFUE DESCRIPTION WARRANTY FEATURES

TECHNICAL GUIDE MODELS: P*DH GAS-FIRED CONDENSING / HIGH EFFICIENCY DOWNFLOW / HORIZONTAL FURNACES 91 AFUE DESCRIPTION WARRANTY FEATURES 036-1354-001 Rev. D (110) Heating TECHNICAL GUIDE MODELS: P*DH GAS-FIRED CONDENSING / HIGH EFFICIENCY DOWNFLOW / HORIZONTAL FURNACES 91 AFUE NATURAL GAS 37-111 MBH OUTPUT Air Conditioning EFFICIENCY RATING

More information

Upflow/ Horizontal Downflow/Horizontal Condensing, Direct Vent Gas-Fired Furnace

Upflow/ Horizontal Downflow/Horizontal Condensing, Direct Vent Gas-Fired Furnace Upflow/ Horizontal Downflow/Horizontal Condensing, Direct Vent Gas-Fired Furnace XL 95 TUH2B060A936VA, TUH2B080A92VA, TUH2C100A98VA, TUH2D1A960VA, TDH2B060A936VA, TDH2B080A92VA, TDH2C100A98VA, TDH2D1A960VA

More information

Cooling Capacity CFM in. w.c. (125 Pa)

Cooling Capacity CFM in. w.c. (125 Pa) 93% AFUE, Single Stage, PSC Gas Furnace EASIER TO SELL 93% AFUE, all models all positions F9MES 50 Hz Product Specifications Certified to leak 2% or less of nominal air conditioning CFM delivered when

More information

Cooling Capacity CFM in. w.c. (125 Pa)

Cooling Capacity CFM in. w.c. (125 Pa) R9MSB Product Specifications 92.1% AFUE, Single Stage, PSC Gas Furnace EASIER TO SELL 92.1% AFUE, all models all positions, California NOx approved Certified to leak 2% or less of nominal air conditioning

More information

G I E TECHNICAL GUIDE 95.5% AFUE SINGLE STAGE RESIDENTIAL GAS FURNACES MULTI-POSITION MODELS: TG9S DESCRIPTION FEATURES WARRANTY SUMMARY

G I E TECHNICAL GUIDE 95.5% AFUE SINGLE STAGE RESIDENTIAL GAS FURNACES MULTI-POSITION MODELS: TG9S DESCRIPTION FEATURES WARRANTY SUMMARY G I E TECHNICAL GUIDE 95.5% AFUE SINGLE STAGE RESIDENTIAL GAS FURNACES MULTI-POSITION MODELS: TG9S NATURAL GAS 60-120 MBH INPUT Due to continuous product improvement, specifications are subject to change

More information

G60DFV(X) WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature

G60DFV(X) WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature Service Literature Corp. 0211 L3 Revised 09 2006 G60DFV(X) G60DFV(X) SERIES UNITS G60DFV series units are mid efficiency gas furnaces used for downflow applications only, manufactured with Lennox Duralok

More information

Submittal. Upflow/ Horizontal Left/Right Two Stage Condensing Gas Fired Furnace 80,000 BTUH S9V2B080U3-SUB-1-EN. February 2016 S9V2B080U3PSAA TAG:

Submittal. Upflow/ Horizontal Left/Right Two Stage Condensing Gas Fired Furnace 80,000 BTUH S9V2B080U3-SUB-1-EN. February 2016 S9V2B080U3PSAA TAG: Submittal Upflow/ Horizontal Left/Right Two Stage Condensing Gas Fired Furnace 80,000 BTUH Upflow, Convertible to Horizontal Right or Horizontal Left S9V2B080U3PSAA Note: Graphics in this document are

More information

TSTAT0201CW Recommended (sold separately)

TSTAT0201CW Recommended (sold separately) G9MVE QuietComfort ET 96 Product Specifications Up to 96% AFUE, Communicating, Two Stage Gas Furnace EASIER TO SELL Up to 96% AFUE, all models, all positions California NOx approved Series A2 (or greater)

More information

TSTAT0101SC Recommended (order separately)

TSTAT0101SC Recommended (order separately) Up to 98% AFUE Communicating, Modulating Gas Furnace EASIER TO SELL 98% AFUE on G9MAC0602120, all positions 97% AFUE, all other models, all positions All Models have earned the ENERGY STAR Modulating heating

More information

DM80HE. Two-Stage Convertible Multi-Speed ECM Gas Furnace 80% AFUE. Heating Input: 60, ,000 BTU/h

DM80HE. Two-Stage Convertible Multi-Speed ECM Gas Furnace 80% AFUE. Heating Input: 60, ,000 BTU/h Two-Stage Convertible Multi-Speed ECM Gas Furnace 80% AFUE Heating Input: 60,000 100,000 BTU/h Contents Nomenclature... 2 Product Specifications... 3 Dimensions... 4 Airflow Data... 5 Wiring Diagram...

More information

Product Data PG9MXA 4-WAY MULTIPOISE TWO-STAGE CONDENSING GAS FURNACE

Product Data PG9MXA 4-WAY MULTIPOISE TWO-STAGE CONDENSING GAS FURNACE 4-WAY MULTIPOISE TWO-STAGE CONDENSING GAS FURCE Product Data A9801 Utilizing the extensive resources available to Payne, a new standard of excellence has been achieved with the model. The model is a unique

More information

B24/C22/24 COILS BLOWER COIL UNITS ENGINEERING DATA. Bulletin # June 1994 Supersedes August B24 Blower Unit (With Optional Electric Heat)

B24/C22/24 COILS BLOWER COIL UNITS ENGINEERING DATA. Bulletin # June 1994 Supersedes August B24 Blower Unit (With Optional Electric Heat) ENGINEERING DATA COILS BLOWER COIL UNITS B24/C22/24 B24 SERIES ADD-ON BLOWER UNITS UP-FLO DOWN-FLO HORIZONTAL WITH C22FC/CR22/CH22 & C24FC/CH24 COILS 1-1/2 Thru 5 Ton (5.3 thru 17.6 kw) Capacity 6,400

More information

GHR32Q/V SERIES UNITS

GHR32Q/V SERIES UNITS Service Literature GHR32Q/V Corp. 0001 L2 Revised 08 2004 This manual contains information pertaining to GHR32 1 through 6 model units. GHR32 series units are high efficiency horizontal or down flow gas

More information

G32V. Service Literature G32V SERIES UNITS

G32V. Service Literature G32V SERIES UNITS Service Literature G32V SERIES UNITS G32V series units are high efficiency upflow gas furnaces manufactured with DuralokPlus aluminized steel clamshell-type heat exchangers. G32V units are available in

More information

FORM NO. G REV. 2 Supersedes Form No. G Rev. 1 GAS FURNACES

FORM NO. G REV. 2 Supersedes Form No. G Rev. 1 GAS FURNACES FORM NO. G11-489 REV. 2 Supersedes Form No. G11-489 Rev. 1 GAS FURNACES RGPR- SERIES ECM Equipped Models with Input Rates from 50,000 to 125,000 BTU/HR 115 Volts, 60 Hz, Single Phase [15 to 37 kw] (U.S.

More information

VNE GAS FURNACE 2- STAGE VARIABLE SPEED UPFLOW/HORIZONTAL

VNE GAS FURNACE 2- STAGE VARIABLE SPEED UPFLOW/HORIZONTAL VNE GAS FURNACE 2- STAGE VARIABLE SPEED UPFLOW/HORIZONTAL 25--21--65 Representative photo only, some models may vary in appearance. MANUFACTURED FOR NATURAL GAS CONVERTIBLE TO (LP) PROPANE GAS NOTE: These

More information

80% Variable Speed, Two Stage Heating Furnace. Cooling Capacity CFM in. w.c. (125 Pa)

80% Variable Speed, Two Stage Heating Furnace. Cooling Capacity CFM in. w.c. (125 Pa) 80% Variable Speed, Two Stage Heating Furnace EASIER TO SELL 80% AFUE Series B approved for Twinning applications (0902116, 1002122, and 1352422) with accessory (order separately) Supports two stage cooling

More information

Product Data PG9MAB MULTIPOISE CONDENSING GAS FURNACE

Product Data PG9MAB MULTIPOISE CONDENSING GAS FURNACE MULTIPOISE CONDENSING GAS Product Data INSTALLATION FLEXIBILITY The 4 -way multipoise design allows a model to be installed in an upflow, downflow, hizontal ientation. All sizes of the may be installed

More information

Cooling Capacity CFM in. w.c. (125 Pa)

Cooling Capacity CFM in. w.c. (125 Pa) 96% AFUE, Two Stage ECM Gas Furnace EASIER TO SELL 96% AFUE, all models, all positions Two stage heating operation Xtra SEER ECM blower motor Supports two stage cooling units Dehumidification feature in

More information

LRP14GE. SEER AFUE - 81% 2 to 5 Tons Cooling Capacity - 22,600 to 57,000 Btuh Input Gas Heating Capacity - 54,000 to 126,000 Btuh

LRP14GE. SEER AFUE - 81% 2 to 5 Tons Cooling Capacity - 22,600 to 57,000 Btuh Input Gas Heating Capacity - 54,000 to 126,000 Btuh PA C KA G E D G A S / E L E C T R I C LRP14GE Residential - R-410A Bulletin No. 210720 November 2016 P R O D U C T S P E C I F I C AT I O N S Supersedes June 2016 SEER - 14.00 AFUE - 81% 2 to 5 Tons Cooling

More information

Submittal. Downflow Two Stage Condensing Gas Fired Furnace 100,000 BTUH S9V2C100D4-SUB-1-EN. March 2016 S9V2C100D4PSAA TAG:

Submittal. Downflow Two Stage Condensing Gas Fired Furnace 100,000 BTUH S9V2C100D4-SUB-1-EN. March 2016 S9V2C100D4PSAA TAG: Submittal Downflow Two Stage Condensing Gas Fired Furnace 100,000 BTUH Downflow Only S9V2C100D4PSAA Note: Graphics in this document are for representation only. Actual model may differ in appearance. SAFETY

More information

GME8 80% AFUE. Multi-Position, TwinComfort. Heating Input: 60, ,000 BTU/h

GME8 80% AFUE. Multi-Position, TwinComfort. Heating Input: 60, ,000 BTU/h 80% AFUE Multi-Position, TwinComfort Multi-Speed Gas Furnace Heating Input: 60,000 100,000 BTU/h Standard Features Patented dual-diameter tubular heat exchanger Two-stage gas valve that allows installer

More information

Upflow/Horizontal Left, Downflow/Horizontal Right Two Stage Condensing Gas-Fired Furnace

Upflow/Horizontal Left, Downflow/Horizontal Right Two Stage Condensing Gas-Fired Furnace Upflow/Horizontal Left, Downflow/Horizontal Right Two Stage Condensing Gas-Fired Furnace XL 90 TUX060, 080, 100, 120R TDX060, 080, 100, 120R Direct Vent with Variable Speed Inducer PUB. NO. 22-1705-02-1202

More information

TSTAT0101SC Recommended. Cooling Capacity CFM in. w.c. (125 Pa)

TSTAT0101SC Recommended. Cooling Capacity CFM in. w.c. (125 Pa) 96% AFUE, Two Stage, Variable Speed Gas Furnace EASIER TO SELL 96% AFUE, all models, all positions Two stage heating operation Xtra SEER variable speed ECM blower motor Supports two stage cooling units

More information

MERIT SERIES Up Flow / Horizontal

MERIT SERIES Up Flow / Horizontal A I R H A N D L E R S CB26UH / CBX26UH MERIT SERIES Up Flow / Horizontal E N G I N E E R I N G D A T A Bulletin No. 210429 December 2006 Supersedes November 2006 Nominal Capacity 1.5 to 5 Tons Optional

More information

GMSS96 / GCSS96 Single-Stage Multi-Speed Gas Furnace

GMSS96 / GCSS96 Single-Stage Multi-Speed Gas Furnace Heating Input: 40,000 120,000 BTU/h / Single-Stage Multi-Speed Gas Furnace up to 96% AFUE Standard Features Heavy-duty aluminized-steel tubular heat exchanger Stainless-steel secondary heat exchanger Single-stage

More information