AD-27 Parts Manual. Slide Meter/Phase 5 Single Coin Microprocessor 1995 Thru 2001

Transcription

1 AD-27 Parts Manual Slide Meter/Phase 5 Single Coin Microprocessor 1995 Thru 2001 American Dryer Corporation 88 Currant Road Fall River, MA Telephone: (508) / Fax: (508) techsupport@amdry.com /WM/tf ADC Part No

2 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following FOR YOUR SAFETY caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. POUR VOTRE SÉCURITÉ Ne pas entreposer ni utiliser d essence ni d autres vapeurs ou liquides inflammables dans le voisinage de cet appareil ou de yout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: AD-27 DATE OF PURCHASE MODEL NO. RESELLER S NAME Serial Number(s) Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) or telephone your order directly to the ADC Parts Department at (508) Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. IMPORTANT NOTE TO PURCHASER Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

3 Table of Contents OPL and Coin Control Door Assembly... 2 OPL and Coin Control Door Assembly... 3 High Security Control Door Assembly... 4 Slide Meter Case Assembly... 5 Phase 5 Coin Microprocessor Control Panel Assembly... 6 Phase 5 Coin Microprocessor Control Panel Assembly... 7 Coin Vault Assembly... 8 Phase 5 Coin and OPL Microprocessor Control Box Assembly... 9 Main Door Steel Assembly Plastic Main Door Assembly Main Door Switch Assembly (Cold Rolled Steel [CRS] Type Door) Plastic Main Door Switch Assembly Cold Rolled Steel (CRS) Front Panel Assembly Plastic Door Front Panel Assembly Basket (Tumbler) Bearing Assembly (as of April 3, 2001)...16, 17 Basket (Tumbler) Bearing Assembly (prior to April 3, 2001)...18, 19 Basket (Tumbler)/Support Assemblies Idler Bearing Assembly... 21, 22 Lint Door Assembly (as of February 12, 2001) Lint Door Assembly (prior to february 12, 2001) Lint Trap Assembly Sensor Bracket Assembly... 26, 27 Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly... 28, 29 Direct Spark Ignition (DSI) Burner Assembly For Models without Shutoff... 30, 31 Direct Spark Ignition (DSI) Burner Assembly... 32, 33

4 Sail Switch/ Hi-Limit Assembly Single-Phase (1ø) Motor, Electric Relay Panel Assembly Outer Top/Back Guard Assemblies Additional Parts Available... 37

5 2 OPL and Coin Control Door Assembly For Models Mfd. as of March 20, * 1 Control Door with Cold Rolled Steel (CRS) Trim with Hinge (includes illus. nos. 1 through 5) * 1 Slide Meter Control Door with Cold Rolled Steel (CRS) Trim and Hinge (includes illus. nos. 1 through 5) Cold Rolled Steel (CRS) Control Door Trim /8 x 3/8 Neoprene Sponge Tape /8 x 3/8 Neoprene Sponge Tape /4-20 Free Spin Wash Nut XX4451 Lock ONLY XX4451 Key ONLY ADC Logo with Adhesive Tape * Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA

6 OPL and Coin Control Door Assembly 3 For Models Mfd. Between February 12, 2001 and March 20, ** 1 OPL and Coin Control Door without Locks (includes illus. nos. 1 through 5) ** 1 Slide Meter Control Door without Locks (includes illus. nos. 1 through 5) Control Door Trim (cold rolled steel [CRS]) /8 x 3/8 Neoprene Sponge Tape /8 x 3/8 Neoprene Sponge Tape /4-20 Free Spin Wash Nut #10-16 x 5/8 TEK-3 Tamperproof Screw XX4451 Lock ONLY * XX4451 Key ONLY ADC Logo with Adhesive Tape * As required. ** Specify color when ordering. Telephone: (508) Fax: (508)

7 4 High Security Control Door Assembly For Models Mfd. prior to February 12, High Security Control Door Lock ONLY (keyed XX4451) Key ONLY For High Security Control Door Lock (keyed XX4451) ADC Logo with Tape Double Sided Tape Kit 4* Control Door Assembly Complete For Models Mfd. with Slide Meter Controls ONLY (includes illus. nos. 4 through 7 and 9) Microprocessor Control Door Assembly Complete For Models Mfd. with Microprocessor Controls ONLY (includes illus. nos. 4 through 7 and 9) #10-32 x 1/4 Phillips Round Head Machine Screw Suppressor Tape/Gasket (sold by the foot) Gray Top Trim with 2 Lock Holes #10-16 x 5/8 TEK-3 Tamperproof Screw Tamperproof Screw Hand Driver Suppressor Tape/Gasket (sold by the foot) * Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA

8 Slide Meter Case Assembly Lock/Key/Cam and Hardware (keyed GR100) Key ONLY For Slide Meter Lock (keyed GR100) Slide Meter Accumulator 24 VAC (specify timing) Slide Meter - 24 VAC/50 Hz Pin ONLY Position Mini-Universal Socket /4-20 Free Spin Washer Position Connector (mate-n-lock) Position Connector (mate-n-lock) Slide Meter Modular J-Box Socket Terminal ONLY Slide Meter Case ONLY with Door Less Lock #10-24 Speed Nut #10 x 1/2 Hex Head TEK Screw Chute Meter Faceplate Complete (includes illus. nos. 11 and 13 through 16) Chute Meter Faceplate ONLY Rocker Heat Selector Switch Push to Start Relay - 24 VAC Red Indicator Light - 24 VAC Slide Meter Extension (white) Slide Meter Extension (coral blue) Slide Meter Extension (ivory) Typical Slide Meter Coin Chute (not available from ADC) Coin Box Assembly (not available from ADC) Slide Meter Case Mounting Plate Control Door Support Rod Control Door Support Rod Retainer Clip Control Door Support Rod Catch #10-24 x 1/2 Round Head Machine Screw White Slide Meter Timer Door Telephone: (508) Fax: (508)

9 6 Phase 5 Coin Microprocessor Control Panel Assembly For Models Mfd. as of March 12, Coin Keyboard Label Assembly Coin Control Panel Assembly Less Acceptor (includes illus. nos. 1, 2, 4, 5, 6, and 11) Coin Control Panel Assembly with Battery Bracket Less Acceptor (includes illus. nos. 1, 2, 4, 5, 6, and 11) Coin Control Panel ONLY Coin Control Panel with Battery Bracket ONLY #10-16 x 1/2 Hex Head TEK Crimptite Screw Phase 5 Coin Controller ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4 Phillips Round Head Machine Screw Microprocessor Coin Acceptor with Optical Switch * Optic Switch ONLY * Optic Switch Connector ONLY * Microprocessor Socket ONLY Single Coin Optical Switch Harness Dual Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool /8-Amp (slo blo) Fuse ONLY * For dual coin models, double the quantity. American Dryer Corporation 88 Currant Road / Fall River, MA

10 Phase 5 Coin Microprocessor Control Panel Assembly For Models Mfd. prior to March 12, Coin Keyboard Label Assembly Phase 5 Coin Microprocessor Control Panel Assembly (includes illus. nos. 1, 2, 4, 5, 6, and 11) Coin Control Panel ONLY #10-16 x 1/2 Hex Head TEK Crimptite Screw Phase 5 Coin Microprocessor Controller (computer) ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4 Phillips Round Head Machine Screw Microprocessor Coin Acceptor with Optical Switch Optical Switch ONLY Optical Switch Connector ONLY Microprocessor Socket ONLY Single Coin Optic Switch Harness Dual Coin Optic Switch Harness Microprocessor (female) Pin Extraction Tool /8-Amp (slo blo) Fuse ONLY IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller. Telephone: (508) Fax: (508)

11 8 Coin Vault Assembly Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Microprocessor Coin Vault ONLY Cam For 1/4-Turn Lock ONLY /4-Turn Lock Assembly (includes illus. nos. 2 and 3) * 1 1/4-Turn Mer-Pel Key ONLY /4-Turn Coin Box Assembly (includes illus. nos. 2 through 5) /4-Turn Coin Box ONLY without Faceplate /4-Turn Coin Box Faceplate ONLY /4-20 Free Spin Wash Nut Coin Vault Slot Cover Control Door Support Rod Control Door Rod Retainer Clip Control Door Support Rod Catch * Specify key number when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA

12 Phase 5 Coin and OPL Microprocessor Control Box Assembly Step Down Transformer (24 VAC) #10-16 x 1/2 Hex Washer TEK Screw Position Terminal Block #6-32 x 1 Slotted Round Head Machine Screw #6-32 Pal Nut * 1/2-Amp (slo blo) Fuse * #8-18 x 3/8 Phillips Pan Head Screw * Fuse Block/Strip ONLY Pin Microprocessor Connector * Socket Terminal ONLY /8 Universal Bushing * As required. Telephone: (508) Fax: (508)

13 10 Main Door Steel Assembly For Models Mfd. as of February 12, Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Door Gasket Clear Glass Adhesive (10.3 oz. cartridge) Black Glass Adhesive (10.3 oz. cartridge) Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) /4-20 x 3/4 Black Cap Head Setscrew /4 Nylon Washer Black Bottom Hinge Block Assembly (includes illus. nos. 5, 6, and 7) /4-20 x 3/4 Black Cap Head Setscrew /4-20 x 3/4 Stainless Steel Cap Head Setscrew /4-20 x 5/8 Black Carriage Bolt /4-20 Free Spin Wash Nut #10-32 Black Hex Acorn Nut Door Latch Screw /4-20 x 5/8 Black Carriage Bolt /4-20 Free Spin Wash Nut Black Main Door Handle ONLY /16 Door Glass Glass/Door Gasket Tape (for models mfd. as of February 9, 2001) Black Glass Adhesive (10.3 oz. cartridge) For Models Mfd. prior to February 9, #10-32 Black Nylon Acorn Nut American Dryer Corporation 88 Currant Road / Fall River, MA

14 Plastic Main Door Assembly For Models Mfd. prior to February 12, Gray Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) /2 Stainless Steel Main Door Hinge Assembly #10-24 x 3/8 Phillips Pan Head Taptite Screw /4-20 Free Spin Wash Nut Main Door Gasket /16 Door Glass with (4) Holes Main Door Glass Adhesive (10.3 oz. cartridge) /2 Stainless Steel Flat Head Allen Screw Door Glass (nylon) Spacer Main Door Latch Screw (#10 x 7/16 dome hex head) Telephone: (508) Fax: (508)

15 12 Main Door Switch Assembly (Cold Rolled Steel [CRS] Type Door) For Models Mfd. as of February 12, #6-32 x 7/8 Phillips Pan Head Machine Screw #6-32 Hex Nut #6 Star Washer Door Switch ONLY Flag Terminal Black Main Door Switch Housing ONLY Black Main Door Switch Housing Complete (includes illus. nos. 1, 2, 3, 4, and 6) #8-18 x 7/16 Phillips Pan Head TEK Screw American Dryer Corporation 88 Currant Road / Fall River, MA

16 Plastic Main Door Switch Assembly For Models Mfd. prior to February 12, #6-32 Hex Nut #6 Lock Washer Single Pole Door Switch Insulated Female Terminal /8 Standard Nylon Spacers /2 Stainless Steel Main Door Hinge Assembly (includes illus. nos. 6 and 7) #6-32 x 1 Self Clinching Stud Main Door Switch Housing #10-32 x 1/4 Phillips Pan Head Screw Rubber Grommet Telephone: (508) Fax: (508)

17 14 Cold Rolled Steel (CRS) Front Panel Assembly For Models Mfd. as of February 12, * 1 Front Panel Assembly (cold rolled steel [CRS] door) /8 Pop Rivets Friction Door Latch #10-16 x 1/2 Hex Head TEK Crimptite Screw TORX Head Screw (for models mfd. as of October 2, 2000) * Specify color when ordering American Dryer Corporation 88 Currant Road / Fall River, MA

18 Plastic Door Front Panel Assembly For Models Mfd. prior to February 12, * 1 Front Panel Assembly Complete without Hinge (includes illus. nos. 1 through 3 and 5) /32 Pop Rivet Friction Door Latch #10-16 x 1/2 Hex Head TEK Crimptite Screw Rubber Grommet * Specify color when ordering. Telephone: (508) Fax: (508)

19 16 Basket (Tumbler) Bearing Assembly For Models Mfd. as of April 3, 2001 American Dryer Corporation 88 Currant Road / Fall River, MA

20 Basket (Tumbler) Bearing Assembly For Models Mfd. as of April 3, /8 4 Bolt Pressed Steel Round Bearing /8 Lock Washer /8-16 Hex Nut Pillow Block Bearing Assembly Complete (includes illus. nos. 4 through 16 and 20) Bearing Assembly Complete (for models mfd. with rotational sensor) Bearing Support ONLY Bearing Support ONLY (for models mfd. with rotational sensor) /8 Pillow Block Bearing ONLY /8 Pillow Block Bearing (for models mfd. with rotational sensor) /8-16 x 2 Hex Bolt /8 Flat Washer /8 Lock Washer /8-16 Hex Nut /16-24 x 3/8 Setscrew Black /16-18 Hex Nut /16-18 x 1-1/2 Tap Bolt /16 Lock Washer /16-18 x 3/4 Tap Bolt Sintered 8 Magnet Rotational Sensor Assembly (for models mfd. with rotational sensor) /4 x 1/4 x 7/8 Key Pulley L-660 V-Belt (to idler assembly) /16-18 x 1-1/2 Allen Setscrew Telephone: (508) Fax: (508)

21 18 Basket (Tumbler) Bearing Assembly For Models Mfd. prior to April 3, 2001 American Dryer Corporation 88 Currant Road / Fall River, MA

22 Basket (Tumbler) Bearing Assembly For Models Mfd. prior to April 3, /8 Flange Bearing /8 Lock Washer /8-16 Hex Nut /8-16 x 3/4 Hex Head Machine Bolt /8 Lock Washer /8-16 Hex Nut /8-16 x 1-1/2 Hex Head Machine Bolt * 3/8 Flat Washer * 3/8 Lock Washer * 3/8-16 Hex Nut /16-18 x 3/4 Hex Head Machine Bolt /8 Lock Washer /8 Flat Washer /16-18 x 1-1/2 Hex Head Machine Bolt /8-16 Hex Nut /8 Bearing Box Assembly Complete (includes illus. nos. 4 through 20) /8 Bearing Box and Support ONLY (includes illus. nos. 4 through 6, 16, and 17) /8 Bearing Box ONLY Pillow Block Bearing Support ONLY /8 Pillow Block Bearing ONLY /16-18 Hex Nut /16-18 x 1-1/2 Allen Setscrew Pulley /16-18 x 5/16 Allen Setscrew /4 x 1/4 x 7/8 Key L-650 V-Belt (basket [tumbler] to idler) * Some models require a quantity of 4. Telephone: (508) Fax: (508)

23 20 Basket (Tumbler)/Support Assemblies Basket (tumbler) and Support Assembly Complete with Felt Collar (includes illus. nos. 1 through 11) Stainless Steel Basket (tumbler) and Support Assembly Complete with Felt Collar (includes illus. nos. 1 through 11) * 1 Basket (tumbler) ONLY (includes illus. nos. 1, 2, and 6) * 1 Stainless Steel Basket (tumbler) ONLY (includes illus. nos. 1, 2, and 6) Basket (tumbler) Rib ONLY (short) Basket (tumbler) Rib ONLY (tall) Stainless Steel Basket (tumbler) Rib ONLY (short) Stainless Steel Basket (tumbler) Rib ONLY (tall) (includes illus. nos. 1, 2, and 6) /16-18 x 3/8 Socket Button Head Screw /8-16 x 31 Tie Rod /8 Flat Washer #10-16 x 1/2 Hex Head TEK Crimptite Screw Basket (tumbler) Support ONLY /8-16 Hex Nut /8 Split Lock Washer /16 Flat Washer Felt Collar ONLY #847 Adhesive For Felt Collar (5.0 oz. tube) * Felt collar is not included and must be ordered separately. American Dryer Corporation 88 Currant Road / Fall River, MA

24 Idler Bearing Assembly 21 Telephone: (508) Fax: (508)

25 22 Idler Bearing Assembly L-650 V-Belt (idler to basket [tumbler]) x 2-1/2 Compound Pulley L-520 V-Belt (idler to motor) /16-18 x 5/16 Allen Setscrew /16 x 3/16 x 1-3/8 Key /8 x 3/4 Idler Shaft /4-20 x -1/4 Carriage Bolt /8 Flange Bearing /4 Lock Washer /4-20 Hex Nut Idler Bearing Assembly Complete (includes illus. nos. 6 through 22) Idler Bearing Mount ONLY /16-18 x 4 Hex Head Machine Bolt /8-16 x 1 Hex Head Machine Bolt /8 Lock Washer /8 Flat Washer /16-18 Standard Square Nut /16-18 Hex Nut /8-16 Hex Nut /8 Lock Washer /8-16 x 1 Hex Head Machine Bolt Idler Bracket Adjustment Plate Idler Square Washer American Dryer Corporation 88 Currant Road / Fall River, MA

26 Lint Door Assembly 23 For Models Mfd. as of February 12, * 1 Right Hand Hinge Lint Door Assembly with Slide Latch Slide Latch Flush Style (black) /8 x 3/8 Neoprene Sponge Tape * Specify color when ordering. Telephone: (508) Fax: (508)

27 24 Lint Door Assembly For Models Mfd. prior to February 12, Knob Latch Kit Complete (includes illus. nos. 1 through 3) Knob Latch ONLY with Two (2) Screws Adjustable Cam ONLY #12-24 x 3/8 Cam Screw 4* Right Hand Lint Door Assembly Complete (includes illus. nos. 4 through 6) /8 x 3/8 Neoprene Sponge Tape #10-16 x 1/2 Hex Head TEK Crimptite Screw * Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA

28 Lint Trap Assembly Lint Trap Assembly Complete (includes illus. nos. 1, 3, 4, and 5) Lint Trap ONLY /32 Pop Rivet Lint Screen Holder ONLY #10-16 x 1/2 Hex Washer TEK Screw Lint Screen ONLY Lint Door Switch Bracket Lint Door Switch #10-16 x 1/2 Hex Washer TEK Screw Telephone: (508) Fax: (508)

29 26 Sensor Bracket Assembly Microprocessor Sensor Bracket Assembly Noncomputer Sensor Bracket Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

30 Sensor Bracket Assembly /4 Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) Large Automatic Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY Pin Socket Connector ONLY /4 Tinnerman Push On Fastener #6-32 x 1/4 Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY Pin Connector ONLY Pin Terminal ONLY #8-18 x 3/8 Phillips Pan Head TEK Screw #6-32 x 1/4 Round Head Machine Screw Large Thermostat Large Thermostat Large Automatic Reset Thermostat Large Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper (4) ONLY Insulated Terminal ONLY Socket Terminal ONLY Pin Socket Connector ONLY Sensor (4) Bracket Harness Assembly (includes illus. nos. 22, 23, and 24) Noncomputer Sensor (4) Bracket Assembly Complete with Thermostats (includes illus. nos. 14 through 25) Universal Sensor Bracket ONLY Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool #8-18 x 3/8 Phillips Pan Head TEK Screw Telephone: (508) Fax: (508)

31 28 Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

32 Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly L-520 V-Belt (motor to idler) /2 x 2-1/4 Motor Pulley (for 60 Hz models Only) /16-18 x 3/4 Hex Head Machine Bolt /16 Lock Washer /16 Flat Washer * 1 1/2 HP v 1ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with Plug Socket Terminal ONLY Pin/Socket Extraction Tool Pin Housing Connector /16-18 Hex Nut /16 Lock Washer /16 Flat Washer /8 x 3/8 Neoprene Sponge Tape /16-18 Tinnerman Nut /2 HP Motor Mount ONLY (56Z frame) * 1 1/2 HP v 1ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount with Plug Motor (includes illus. nos. 3 through 7 and 13 through 20) /2 S.A.E. Flat Washer /2 Impellor with 1/2 Bore /8 x 1/8 x 1-1/2 Key /2 S.A.E. Flat Washer /2-20 Left Hand Jam Nut * Specify voltage when ordering. Telephone: (508) Fax: (508)

33 30 Direct Spark Ignition (DSI) Burner Assembly For Models without Shutoff American Dryer Corporation 88 Currant Road / Fall River, MA

34 Direct Spark Ignition (DSI) Burner Assembly For Models without Shutoff Small Burner Tube #8-32 Pal Nut #8-32 x 1/2 Pan Head Machine Screw * 2 #32 (natural gas) Burner Orifice * 2 #50 (liquid propane [L.P.] gas) Burner Orifice /2 2-Port Manifold # /2 Hex Head TEK Crimptite Screw Gas Valve Bracket /2 24 VAC Redundant (natural gas) Gas Valve /2 24 VAC Redundant (liquid propane [L.P.] gas) Gas Valve Assembly /2 Gas Valve Liquid Propane (L.P.) Conversion Kit /2 x 1 1/2 B.I. Nipple /2 x 1/2 Street Elbow /2 Black Union /2 x 18 Pipe ** 1 Natural Gas Burner Assembly Complete Less Orifice ** 1 Liquid Propane (L.P.) Gas Burner Assembly Complete Less Burner Orifice Burner Box ONLY Ignitor Flame-Probe Kit Assembly (includes high voltage [H.V.] wire and connector) High Voltage (H.V.) Wire and Connector Assembly #10-16 x 1/2 Hex Washer TEK Screw Pipe Bracket Twin Speed Nut Sail Switch Cover and Bracket ONLY Sail Switch ONLY #4 x 3/4 Pan Head A Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) /8 Push On Fastener Hi-Limit Mounting Bracket #6-32 x 1/2 Phillips Round Head Machine Screw Manual Reset Hi-Limit #6 x 32 Pal Nut #6-32 Hex Nut Direct Spark Ignition (DSI) Module with Three (3) Tries Direct Spark Ignition (DSI) Module Mounting Bracket * Consult factory for elevations over 2,000 feet. ** Burner orifices are not included and must be ordered separately. Telephone: (508) Fax: (508)

35 32 Direct Spark Ignition (DSI) Burner Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

36 Direct Spark Ignition (DSI) Burner Assembly Direct Spark Ignition (DSI) Burner Shield #10-16 x 1/2 Hex Head TEK Screw #10-16 x 1/2 Hex Head TEK Crimptite Screw Direct Spark Ignition (DSI) Ignitor/Flame-Probe Assembly Ignitor/Flame-Probe Kit Assembly (includes illus. nos. 4 and 5) High Voltage (H.V.) Wire and Connector Assembly #8-32 x 1/2 Pan Head Machine Screw #8 Steel Burr #8-32 Pal Nut Small Tube Burner * 2 #32 (natural gas) Burner Orifice * 2 #50 (liquid propane [L.P.] gas) Burner Orifice /2 Direct Spark Ignition (DSI) Manifold (2-port) Pipe Bracket (bent) #10-16 x 1/2 Hex Washer TEK Screw /2 24 VAC Redundant (natural gas) Gas Valve /2 24 VAC Redundant (L.P. gas) Gas Valve /2 Valve L.P. Conversion Kit /2 Union Shutoff with Tail Piece /2 x 18 Pipe #10-16 x 1/2 Hex Head TEK Crimptite Screw Pipe Bracket (bent) Non-Heat Reclaimer Burner Box ONLY ** 1 Burner (natural gas) Assembly Complete Less Orifices (includes illus. nos. 1 through 9 and 11 through 23) ** 1 Burner (L.P. gas) Assembly Complete Less Orifices (includes illus. nos. 1 through 9 and 11 through 23) * 1 Direct Spark Ignition (DSI) (L.P.) Conversion Kit Direct Spark Ignition (DSI) Module ONLY (50/60 Hz) Direct Spark Ignition (DSI) Module Plate #10 x 1/2 Hex Washer #10-16 x 1/2 Hex Head TEK Screw * Consult factory for elevations over 2,000 feet. ** Burner orifices are not included and must be ordered separately. Telephone: (508) Fax: (508)

37 34 Sail Switch/Hi-Limit Assembly Twin Speed Nut #10-16 x 1/2 Hex Head TEK Crimptite Screw Sail Switch Box Cover and Bracket ONLY #4 x 3/4 Pan Head A Machine Screw Sail Switch Sail Switch Actuator Rod Sail Switch Damper (flat) /8 Push On Fastener Sail Switch Box Assembly Complete (includes illus. nos. 1 through 9) Sail Switch Box with Cover and Bracket ONLY /2 x 29-1/8 Pipe #10-16 x 1/2 Hex Head TEK Crimptite Screw Hi-Limit Mounting Bracket ONLY #6-32 Pal Nut #6-32 x 1/2 Round Head Machine Screw Hi-Limit American Dryer Corporation 88 Currant Road / Fall River, MA

38 Single-Phase (1ø) Motor, Electric Relay Panel Assembly Pole Contactor - 24 VAC #10 x 1 Hex Washer TEK Screw #10 x 1/2 Hex Washer TEK Screw Control Voltage Transformer - 24 VAC * 1/2-Amp (slo blo) Fuse * #8-18 x 3/8 Phillips Pan Head TEK Screw * Fuse Block/Strip ONLY #6-32 x 1 Round Head Machine Screw Position Terminal Block #6-32 Pal Nut /16-18 Lock Washer /16-18 Hex Nut Rear Contactor Plate Back Electrical Box Cover...Not Illustrated #8-18 x 3/8 Phillips Pan Head TEK Screw...Not Illustrated * As required. Telephone: (508) Fax: (508)

39 36 Outer Top/Back Guard Assemblies Back Electrical Box Cover ONLY #8-18 x 3/8 Phillips Pan Head TEK Screw Top Back Guard ONLY #8-18 x 3/8 Phillips Pan Head TEK Screw #8-18 x 3/8 Phillips Pan Head TEK Screw Outer Top Guard ONLY Lower Back Guard ONLY #8-18 x 3/8 Phillips Pan Head TEK Screw Leveling Leg American Dryer Corporation 88 Currant Road / Fall River, MA

40 Additional Parts Available 37 Part No. Description Phase 5 Coin Program Location Summary Label Black/White/Green Ground Label WARNING - Fire Hazards Label Clean Lint Screen Label CAUTION - Exhaust/Lint Screen Label /4 In-Line Connector Red Butt Connector #74B Wire Nut Crimp-On Wire Nut /4 Insulated (female) Terminal Tab Receptacle Combination /2 Harness Tie Harness Tie Harness Tie Mounting Clip Manometer (hydro gauge) Almond Brush-In-Cap Bottle Touch-Up Paint White Brush-In-Cap Bottle Touch-Up Paint Beige Brush-In-Cap Bottle Touch-Up Paint Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint Electrical Terminal (assortment) Kit Telephone: (508) Fax: (508)

41 ADC /31/ *02/25/ * 10/18/01-25