Combined boiler. for solid fuel and pellets

Transcription

1 Combined boiler ATTACK WOOD&PELLET for solid fuel and pellets W W W. A T T A C K. S K

2 MODEL STRUC TURE OF THE AT TACK BOILERS THE NEW LINE OF ATTACK BOILERS FOR WOOD AND PELLETS ATTACK FD PELLET yattack FD PELLET youtput: 8 30 kw FD PELLET yefficiency: 88 % FD PELLET Fully automatic burner operation Compact design, easy control, information on LCD display Boiler efficiency by nominal output of 88 % Automatic grate cleaning, adjustable according to the quality of the pellets used Automatic start ignition and termination of the burning process Precise measuring of the flame intensity by photocell Possibility to set the output within the range of 8 30 kw Burner operation controlled by the room thermostat or thermal probe Possibility to adjust combustion according to the fuel used Quality stainless steel of the combustion chamber and burner grate Safety kits for protection against back burning, 4 protection against overheating the emergency, boiler, flue gas thermostat and after-cooling circuit Multilingual menu, option to set wide range of parameters Indication of the operating states Error diagnostics 3 ATTACK DP yattack DP 2 9 STANDARD yattack DP 2 9 PROFI youtput: 2 9 kw yefficiency: 86,2 90, % Flat rib boiler heat exchanger Voluminous feeding chamber of the boiler to ensure longer burning by one load Customer comfort, reliability of operation, easy use and maintenance Manufactured from special boiler steel of 6 mm thickness to ensure long life of the boiler Adjustable rotations of fan the PROFI modification - PID version Exhaust fan for balanced, effective combustion and dustless operation Possibility to load big wood logs saves time for chopping the wood into smaller pieces, it is only necessary to prepare the wood logs of 0, m Left door and right door version Refractory shaped pieces, heat resistant up to 1 30 C to ensure the best burning parameters and boiler life ATTACK DPX yattack DPX 1 4 STANDARD yattack DPX 1 80 PROFI yattack DPX 1 4 LAMBDA yattack DPX 2 0 COMBI Pellet youtput: 1 80 kw yefficiency: 86, 91,3 % High efficient tubular exchanger flue gas-water with movable turbulators Voluminous feeding chamber of the boiler ensures longer heating by one fuel load Exchanger is cleaned by turbulators moved by lever; clean exchanger = high efficiency = lower operating costs, fuel saving Improved electronics with fluent PID regulation of fan rotations according to the flue gas temperature the PROFI modification, version PID Adjustable fan rotations the PROFI modification, version PID, LAMDA Touch Flue gas fan for balanced and effective combustion and dustless operation Possibility to load big wood logs (from 2 kw output) saves time for chopping the wood into smaller pieces, it is only necessary to prepare the wood logs of 0, m Automatic control of the heat-up flap, connected with the feeding door Option of the LAMBDA Touch version the most advanced technology of the burning process control to achieve the excellent values of emissions and efficiency Option to burn alternative fuel types like olive pits and crushed pits in the automatic burners with the output of 30 and 0 kw the COMBI Pellet modification Refractory shaped pieces, heat resistant up to 1 30 C to ensure the best burning parameters and boiler life 2

3 ATTACK SLX yattack SLX 20 PROFI yattack SLX 20 LAMBDA Touch youtput: 20 kw yefficiency: 90,3 91,8 % High efficient tubular exchanger flue gas-water with movable turbulators Extraordinary volume of the feeding chamber of l to ensure longer heating by one fuel load Optional dry coat placed around the whole feeding chamber increased protection against creation of tar in the chamber Adjustable fan rotations the PROFI modification, version PID Exhaust fan for balanced, effective combustion and dustless operation Possibility to load big wood logs saves time for chopping the wood into smaller pieces, it is only necessary to prepare the wood logs of 0, m Automatic control of the heat-up flap, connected with the feeding door Option of the LAMBDA Touch version the most advanced technology of the burning process control to achieve the excellent values of emissions and efficiency Improved electronics with fluent PID regulation of fan rotations according to the flue gas temperature the PROFI modification, version PID Refractory shaped pieces, heat resistant up to 1 30 C to ensure the best burning parameters and boiler life ATTACK PELLET yattack PELLET 30 AUTOMATIC Plus youtput: 8 30 kw yefficiency: 90,6 % High efficient tubular exchanger equipped with spiral turbulators that ensure better heat transfer in the exchanger, higher boiler efficiency and cleaning of the exchanger The pellet burner with fully automatic operation (i.e. ignition and extinguishing), automatic cleaning and error diagnostics Automatic cleaning of the tubular exchanger Automatic boiler operation ensuring high user comfort Automatic ash removing into the detachable container Automatic fuel supply Stainless steel ATTACK burner combustion chamber and grate are made from the quality stainless steel Automatic grate cleaning, adjustable adequately to the quality of the pellets used Option to connect various types of fuel feeders Safety kits for protection against back burning, 4 protection against overheating emergency, boiler, flue gas thermostat and after-cooling circuit Option of additional heating by a coil with output up to 6 kw that can be also used as an antifreeze protection ATTACK W&P y youtput: wood 12, 2 kw, pellets 9 30 kw yefficiency: wood 90, %, pellets 90,4 % Innovative combined boiler 2 operating modes maximum user comfort Extraordinary feeding chamber of the boiler to ensure longer heating by one fuel load Automatic cleaning of turbulators and pellet chamber the highest comfort Optional dry coat around the whole feeding chamber increased protection against creation of tar in the chamber The pellet burner with fully automatic operation (i.e. ignition and extinguishing), automatic cleaning and error diagnostics Automatic combustion of pellets and wood one chimney Stainless steel ATTACK burner combustion chamber and grate are made from the quality stainless steel Automatic grate cleaning, adjustable adequately to the quality of the pellets used Option to connect various types of fuel feeders Operation with wood is automatically switched to the operation with pellets flexible fuel choice Sophisticated electronics with the LAMBDA Touch 6 inch display the most advanced technology of combustion process control used to achieve the excellent values of emissions and efficiency User comfort, reliability of operation, easy use and maintenance Multiple protection system Reliable flame supervision Possibility to load big wood logs saves time for chopping the wood into smaller pieces, it is only necessary to prepare the wood logs of 0, m Option to start, watch, control and stop the boiler via internet or by Smart phone Left and right door version Cyclonic separator is delivered together with the boiler Option to place the pellet tank next to the boiler or in the distance up to 10 m 3

4 MODEL LINE 9000 Combined boiler for solid fuel and pellets If you are looking for a boiler with low operating costs and comfort comparable with usage of a gas boiler, you have just found it. We are introducing you the ecological combined boiler ATTACK WOOD&PELLET, suitable for burning of several types of fuel, especially soft and hard wood, briquettes and pellets. The boiler is intended for heating of family houses, huts, small plants, workrooms and similar objects. BOILER ADVANTAGES y Innovative, ecological and high efficient boiler maximal comfort of the customer y High combustion efficiency: 90, % (wood) 90,4 % (pellets) y Modern electronics with the Lambda probe y Graphical and well-readable touch display y Automatic cleaning of turbulators and pellet chamber y By the wood burning at full output, there is a continuous period of burning for 6 hours y Automatic change from the operation with wood to the operation with pellets flexible fuel selection y Very low operating costs y High quality components verified quality y Long life y Multi-level safety concept pleasant feeling of safety y Big volume of the feeding chamber TECHNICAL PARAMETERS Parameter Output range by wood 12, 2 kw Output range by pellets 9 30 kw Volume of feeding chamber 160 l Width height depth mm Boiler width without covering 760 mm Efficiency 90, % by wood, 90,4 % by pellets Max. length of wood logs 60 mm Flue gas temperature 10 C Prescribed chimney draught 2 Pa Boiler weight 840 kg DESCRIPTION To provide the high comfort, the boiler is equipped with the feeding chamber of big volume. Thereby there is an option of the continuous burning at full output for 6 hours. Moreover, if the boiler detects signal for heating, it can automatically start the pellet burning process, after the wood in the wood-gasifying boiler part burns out, without any action into the boiler operation. Thereby you can easily use advantages of the cheapest heat source wood, in combination with the comfortable and also very cheap heat source pellets. dimensions G 1/2" G 6/4" G1/2" G 6/4"

5 MODEL LINE 9000 COMBINED BOILER CHARACTERISTICS The boiler is equipped with the flue gas fan and the horizontal flue exhaust from the feeding chamber. After opening the door of the chamber, the flue gas is taken into the chimney to ensure clean and dustless environment in the boiler room. It is only necessary to fully load the chamber and to light the space by the middle door heating up can be done within 10 minutes, without any smoke. High precision of the combustion process is ensured by the modern electronics with the Lambda probe, which enables regulation of the boiler output and setting of many useful parameters. Combustion of pellets is ensured by the burner made from the best quality refractory steel. Burner operation is fully automatic. Boiler body is welded from the high quality boiler steel of 6 mm thickness, ensuring long life. Refractory concrete parts are made from the best quality material, strengthened by the refractory reinforcement. Furthermore, the most strained nozzle is treated by a special refractory cast iron, prolonging the boiler s life, because it is resistant to scoring. Boiler cleaning is very easy. Turbulators and pellet combustion chamber are cleaned automatically. Boiler electronics can be supplemented with the additional modules, enabling control of accumulation tank, mixing circuits, D.H.W. storage tank, solar panels and other heat sources. Boiler state can be also controlled via the LAN internet connection. Electronics is able to provide a month record of the information about operation.

6 MODEL LINE 9000 Boiler safety The boiler is equipped with the integrated aftercooling circuit, connected to the cold water and ensuring the safe cooling down of the boiler in the case of its overheating. The emergency thermostat is the next safety element. In the case of overheating, it stops electrical power supply into the all electrical parts of boiler, except of the pump to cool the boiler down as soon as possible. If the boiler gets overheated, the electronics warns the user by a sound signal. If the boiler works under the pellet mode, it is able to lock the main door by the electrical lock, not to leave the door imperfectly closed or partly open. The boiler has a double protection against the backward burning the high efficient turnstile feeder and the self-extinguishing hose. HIGH EFFICIENT COMBUSTION The boiler achieves particularly high efficiency, exceeding 90, % by wood and 90,4 % by pellet combustion. This has been reached also thanks to the vertical tubular exchanger with extraordinary heat exchange area and special, automatically moved turbulators. Thereby is the declared efficiency ensured for the whole boiler s life. BOILER ELECTRONICS y Option to select the modes: Wood, Combi, Testmode y Automatic pellet burner start after the wood is burned-out in the feeding chamber, under the Combi mode y Wood is lighted manually or automatically by the burner immediately or with time delay y Precise burning control by the Lambda probe y Reliable control of the flame by the photocell y Colour touch display of,7" y Option to update the boiler s regulation anytime with the newest software y easily by the USB key y Option to start, watch, control and stop the boiler via the internet y Ability to keep the actual time and the parameters set, even after the power failure y Time programs of the boiler operation y Micro SD card of 12 MB to record the information about the boiler operation y Option of control by the external thermostat y Option to add the external modules to control accumulation tank, heating circuits including the floor heating, D.H.W. circuit, solar circuit and switching the other automatic boiler y Adjustable screensaver y Approach to the service settings by code y Record of the error messages 6

7 Description of the burner The burner is made from the best quality refractory steel, ensuring the long life and reliability. The burner is fully automatic, accessorized with the reliable system for pellet ignition, advanced combustion regulation, modulation, precise control of the flame, high efficient automatic cleaning, control of fan rotations and protection against overheating. The burner is separated from the feeding and combustion chamber for wood gasification by its own combustion chamber. Thereby it is minimally thermally strained, when it is out of order. If it is necessary to clean the burner, it can be easily shifted out of the combustion chamber on a pantograph, enabling easy manipulation. Fuel MODEL LINE 9000 In the wood gasifying part of the it is possible to burn the soft and hard wood with relative humidity of %. and max. length of 60 mm. To burn the wood briquettes together with the wood it is necessary to keep the appropriate ratio. The stainless steel burner is intended for combustion of the wood pellets with diameter of 6 mm, length up to 3 mm and max. humidity of 12 %. COMBINED BOILER ACCESSORY FOR THE BOILER attack wood&pellet There is an optional accessory for the boiler that can be purchased and installed anytime when it is necessary the pellet tank called ATTACK PEL000 WP. Volume of this tank is 00 l and it can be installed near the boiler or up to the distance of 10 m, even in the another room. Pellets are supplied by the vacuum motor built into the boiler through hoses (available to be purchased separately). The cyclonic separator delivered together with the boiler is able to separate fine dust particles from pellets and thereby it keeps the environment in the boiler cleaner. The separator has to be connected to the outlet hose of the pneumatic pellet supply from the boiler. It can be installed on the wall for easier detaching of the bottom dust container. The separator does not need any additional motor and its operation is noiseless. Frequency of cleaning the separator depends on the amount of dust contained in pellets and on duration of the pneumatic supply. Normally it is necessary to do the cleaning every 2 6 weeks. Description 7 9 KEY: 1. Boiler body 2. Main door 3. Cover of the inlet of the primary and secondary air 4. Openings for cooling of electronics. Boiler electronics 6. Cover of boiler electronics 7. Flow connection 8. Aftercooling circuit 9. Cover of turbulator cleaning 10. Lambda probe 11. Adjustable chimney 12. Exhaust fan 13. Return connection

8 SLOVAK REPUBLIC ATTACK, s.r.o. Dielenská Kružná Vrútky Slovak republic Tel: Fax: Web: The manufacturer ATTACK, s.r.o. reserves the right of technical changes of products without previous notice. Pictures and technical data of the products are for information only. Current technical documentation are available on the above contacts. Change of prices and offers are reserved. ATTACK, s.r.o. 02/2017