GROUP PRESENTATION 2016

Transcription

1 GROUP PRESENTATION 2016

2 ABOUT US International Oil & Gas engineering group operating on two market segments : Downstream: Process Fired Heaters (Heurtey Petrochem) Upstream: Gas Treatment (Prosernat) PROCESS FIRED HEATERS GAS TREATMENT REFINING PETROCHEMICALS HYDROGEN NATURAL GAS (PROSERNAT) 2

3 3 INTERNATIONAL NETWORK

4 KEY FIGURES Listed on the Paris stock exchange market Alternext of Euronext Reference shareholder : IFPEN (36,1% of capital) Turnover 2014 : 437 M Backlog 2014: 507 M Evolution since the quotation on the stock exchange market Backlog (M ) Turnover (M ) ,9 4,7 EBIT (M ) 12,7 11,8 9,4 8,5 7,

5 OUR CLIENTS END-USERS EPC CONTRACTORS 5

6 BUSINESS LINES : DOWNSTREAM Downstream activities are the core business of Heurtey Petrochem (over 60 years of experience in the refining sector) Design and fabrication of Process Fired Heaters for the hydrocarbon industries : REFINING PETROCHEMICALS HYDROGEN 6

7 BUSINESS LINES : DOWNSTREAM HYDROGEN PETROCHEMICALS REFINING 7

8 BUSINESS LINES : UPSTREAM Upstream activities in Natural Gas Treatment through Prosernat: PROCESS LICENSOR AdvAmine TM AdvaSulf TM Drizo TM Clauspol TM AdvaCap TM PROCESS UNIT SUPPLIER NG Dehydration Units NG SweeteningUnits NGL Recovery Units Claus & TGT Units Refinery Processing Units CO 2 Capture Units 8

9 TECHNOLOGY & LICENSORS Technology neutral: In-house design tools to design furnaces Qualified by major licensors to design furnaces based on licensor process technology : STEAM CRACKING EDC CRACKING REFINING HYDROGEN 9

10 PROJECT EXECUTION RESOURCES Heurtey Petrochem offers a full range of resources for conducting projects, from feasibility studies to LSTK supply: Modernisation and revamping Spare parts sourcing Feasibility studies Basic and detail engineering Mechanical design Commissioning and start-up Procurement Construction and supervision Field services Prefabrication and modularisation Project management 10

11 FABRICATION WORKSHOP Fabrication workshop located in Buzau, Romania Heurtey Petrochem Manufacturing Opportunity to control every sequence of the furnace fabrication Increases competitiveness on challenging fabrication issues Strategic location near all transportation means Production capacity : 300 tons/month Workshop surface : m² Workforce :

12 FABRICATION PARTNERS International network of fabrication shops Long lead partnerships with fabrication companies Thailand, India, Malaysia etc. Brasil Worked with CONFAB, USIMINAS, ZANINI ZANINI is current preferable workshop, but not limited. 12

13 PREFABRICATION & MODULARISATION To face construction constraints and shorten erection periods Prefabrication services for the modularisation of equipments : STICK-BUILT PARTIALLY MODULARISED FULLY MODULARISED 13

14 Heurtey Petrochem offers its expertise for : Studies: STUDIES AND REVAMPS Increasing the heater capacity and efficiency Studying change of process feed and fuel with the existing configuration and suggested modification Increasing of run length with added value engineering solutions Coil modifications, FEA analysis, floor modifications, refractory modification Burner selection to cope with existing heater configuration and reduce NOx emissions BMS implementation, safety increase and adjustment to new 14 regulations.

15 SERVICES & SPARE-PARTS Field services : Heater inspection Field survey Performance test data collection Investigation with Customer s operational team Identification of the bottlenecks to solve problems Start-up assistance Training Spare parts : Agreed supplier network Engineering and QA/QC teams expertise Schedule constraints Supply in compliance with specific regulations such as PED 15

16 DEALING WITH CONSTRAINTS YOUR CONSTRAINTS ARE OUR PRIORITY : Adaptability to our clients schedule Supply in compliance with specific regulations such as PED From a single burner tip to a fully modularized convection section with Heurtey Petrochem s guarantee 16

17 ENVIRONMENT Full compliance with environmental codes and standards Focus on the following nuisances : Noise limitation Combination of ceramic fiber and concrete in the construction of furnace walls Proper muffling of air intakes CO and NOx emissions limitation Proper and well-controlled operation of the heaters Use of low NOx burners Implementation of a denox system on the flue gases 17

18 18 EXPERIENCE - BRAZIL

19 EXPERIENCE/RECENT PROJECTS CLIENT PETROBRAS (2007) LOCATION REGAP, MG SCOPE EPC Supply of a Hydrogen Reformer TECHNOLOGY Technip/CENPES 19

20 EXPERIENCE/RECENT PROJECTS CLIENT BRASKEM (2010) LOCATION ALAGOAS SCOPE EP Supply of new EDC Cracking Furnace 20

21 EXPERIENCE/RECENT PROJECTS CLIENT Reliance Industries Limited (RIL) PROJECT JERP II (2006 to 2009) LOCATION Jamnagar Refinery, India SCOPE Supply of 31 furnaces: 3 Steam Superheaters, 2 Vacuum Distillation Heaters, 1 Reboiler, 11 Reactor Charge Heaters, 1 Catalytic Reformer, 4 Atsmospheric Distilation Heaters, 2 Hot Oil Heaters, 6 Hydrotreaters and 1 Coker Charge Heater 21

22 EXPERIENCE/RECENT PROJECTS CLIENT Aromatics Oman PROJECT Sohar Aromatics projects (2006 to 2009) LOCATION Sohar Refinery, Oman SCOPE 8 reboilers, 6 reactor charge heaters and 1 catalytic reformer 22

23 EXPERIENCE/RECENT PROJECTS CLIENT ExxonMobil Chemical PROJECT Singapore Parallel Train Olefins Furnace (2007 to 2010) LOCATION EMC Petrochemical Complex, Jurong Island, Singapore SCOPE Supply of 7 fully modularised ethylene cracking furnaces and marine transportation from Thailand to Singapore TECHNOLOGY - ExxonMobil 23

24 EXPERIENCE/RECENT PROJECTS CLIENT TANECO PROJECT Reformer project ( ) LOCATION Nizhnekamsk (Tatarstan), Russia SCOPE Supply of one 406 tubes steam reformer TECHNOLOGY Haldor Topsoe 24

25 EXPERIENCE/RECENT PROJECTS CLIENT Nafta Industria Serbije (NIS) PROJECT Hydrogen Unit Project ( ) LOCATION Pancevo Refinery, Serbia SCOPE EPC LSTK Supply of one complete hydrogen production unit Nm3/h and two hydrocrackers TECHNOLOGY Haldor Topsoe 25

26 EXPERIENCE/RECENT PROJECTS CLIENT GS E&C for Takreer PROJECT CO Boiler Project (2010 to 2013) LOCATION Ruwais Refinery, Abu Dhabi SCOPE Supply of 2 CO Boilers down a RFCC unit 26

27 EXPERIENCE/REVAMPING CLIENT Rafineria Gdanska LOCATION Gdansk, Poland SCOPE Replacement of a Vacuum Distillation Heater in 7 days Stage 1 : Removal of the old heater from foundations. Stage 2 : The new heater built on temporary foundations is being rolled on position by mean of trolleys pushed on the rails by hydraulic jacks. Stage 3 : Placement of the new heater on the existing foundations 27

28 EXPERIENCE/REVAMPING CLIENT BP France LOCATION Lavera, France SCOPE Revamping of a Crude Heater from a Atmospheric Distillation Unit in 34 days. Addition of tubes in the radiant section Replacement of the existing convection with a new one having a new configuration Modification of the flue gas ducts between the radiant & convection sections. 28

29 EXPERIENCE/REVAMPING CLIENT Natref LOCATION Sasolburg, South Africa SCOPE Revamping of 1 Reactor Charge Heater and 1 Stripper Reboiler in 21 days. Modification of an existing convection section: Detubing, retubing and addition of tubes in order to increase the capacity. 29

30 EXPERIENCE/REVAMPING CLIENT Arpechim LOCATION Pitesti, Romania SCOPE Revamping on a Vacuum Distillation Heater and a Atmospheric Distillation Heater Replacement of the existing burners by new ones of low NOx type Replacement of the existing burner management system and implementation of new control loops Improvement of the safety in compliance with the european norms Installation of additional steam air preheaters upstream to the existing flue gas air preheaters Replacement of the existing combustion air fans. 30

31 EXPERIENCE/REVAMPING CLIENT Total LOCATION Donges, France SCOPE Revamping of 2 Vacuum Distillation Heaters Replacement of the convection section 31

32 THANK YOU