Stirring, Shaking, Mixing. Magnetic stirrers / Hotplates 310 Overhead stirrers 329 Shakers and Mixers 343

Transcription

1 Stirring, Shaking, Miing Magnetic stirrers / Hotplates 0 Overhead stirrers 9 Shakers and Miers

2

3

4 Stirring, Shaking, Miing Magnetic stirrers / hotplates GENERAL CATALOGUE 007/08 Magnetic stirrers, lab disc Without heating. lab disc is an innovative, very flat magnetic stirrer. With its modern toroidal coil technology it guarantees a wear-free drive entirely without moving parts. lab disc can automatically change it's rotational direction every 0 seconds and obtain thus a better miing of the medium. - E protection zone - High IP protection - Wear-free motor - Automatic rotational direction change Ma. volume stirred (water): 800 ml Motor rating input/output: / W to 00 rpm Ma. stirrer bar (L ): 0 8 Usable plate area : 90 Dimensions (W D H): 0. kg Housing IP rating to DIN EN 09: IP Description White Sunny Side Up Orange Green Pink Brown Magnetic stirrers, Ikamag Color Squid series Without heating. Individually motifed, small magnetic stirrers developed for research, quality control and routine laboratories, pharmacies and schools. "Dual-component" magnetic stirrers, combining the transparency and resistance of a glass top with the fleibility and chemical resistance of Hytrel plastic. Optimally sealed against aggressive vapours or spilt liquid penetration. Suitable for magnetic stirring bars of up to 0 in length and for stirring volumes of low viscosity media up to 800 ml. With 0 diameter top plate. Further motifs are available on request. Ma. stirring volume (HO): 0.8 litres Motor rating, input/output: 0 to 00 rpm. / W Top plate: glass, 0 Dimensions (W D H): g Supply requirements: 00-0 V ±0 % 0/0 Hz a.c. Protection level: IP Mighty Mouse Wildcat Zip Harry's notes Curly Sunny Bighead Balloon Number one

5 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Magnetic stirrers / hotplates Magnetic stirrers, Ikamag Big Squid Without heating. Individually motifed, magnetic stirrers for research, quality control and routine laboratories, pharmacies and schools. With 0 diameter top plate. Volume stirred up to 00 ml (water). Speed: Ma. load: 0 to 00 rpm kg Humidity: 80% R.H. ma. Dimensions (W D H): kg Supply requirements: 00-0V ±0 % 0/0 Hz a.c. Protection level: IP Froggy Star Ocean White mäleon Pineapple Strawberry Orange Kiwi Magnetic stirrer, KMO basic, Ikamag Small but very powerful magnetic stirrer, without heating. - strong magnetic field resists stir bar decoupling - motor with opto-electronic speed control - adjustable speed up to 00 rpm - stainless steel housing for easy cleaning and sterilization - with thread M 0 for support rod H V Ma. volume stirred (water): litres Motor rating input/output: / W 0 to 00 rpm Surface: 0 0, stainless steel (AISI0) Dimensions (W D H): kg Supply requirements: 0 V 0/0 Hz Housing IP rating to DIN EN 09: IP KMO basic Ikamag Magnetic stirrer REO basic C Ikamag Classic, unheated, magnetic stirrer in a modern design. Outstanding chemical resistance due to the white coated heating plate. - Non-locking, electronically controlled motor - Maintains constant speed even during changes in load - Infinitely variable speed Stirring volume: up to 0 litres (water) Motor rating input/output: / W 0 to 00 rpm Top plate material: enamelled stainless steel Top plate dimensions: Dimensions (W D H): kg Supply requirements: 0 V 0/0 Hz Housing IP rating to DIN EN 09: IP REO basic C

6 Stirring, Shaking, Miing Magnetic stirrers / hotplates GENERAL CATALOGUE 007/08 Magnetic stirrer Ikamag Mini MR standard Generally as Color Squid, but with classicdesign housing. Ma. stirring volume, (water): 800 ml Motor rating, input/output: /0. W 0 to 00 rpm Top plate: Polyester film Size (W D H): kg Protection to DIN EN 09: IP Mains supply: 00-0 V 0/0 Hz Mini MR standard MAG 9.70 Magnetic stirrers, Ikamag MR digital High power, magnetic stirrer without heating. - Flat stable stainless steel housing - Non-locking motor - Adjustable speed - LED digital speed display - Timer 0 to minutes, or continuous operation Midi MR digital Ikamag Motor rating input/output: 70/9 W Ma. volume stirred (water): 0 L 0 to 000 rpm Top plate: 0 0, stainless steel Dimensions (W D H): kg Protection system to DIN EN 09: IP Mai MR digital Ikamag Motor rating input/output: 80/ W Ma. volume stirred (water): 0 litres 0 to 00 rpm Top plate: 00 00, stainless steel Dimensions (W D H): kg Protection system to DIN EN 09: IP Mai MR digital Ikamag Midi MR digital Ikamag Magnetic stirrer SM For use in the field or inside incubators or gloveboes where eternal power supply is impractical. Maimum speed 00 rpm. Maimum volume stirred. litres (water). Top plate 0 0. Variable speed control with battery status indicator. ABS casing 70 high. Maimum operating conditions +0 C and 80% R.H. Weight. kg. Supplied with.v size 'D' alkaline batteries giving up to 00 hours operation, and a PTFE coated follower. Accessory adapters are available for use on 0 V 0 Hz mains or V vehicle supply using the cigar lighter socket. With BioCote, silver-based, antimicrobial protection. Stuart SM Accessories for magnetic stirrer, SM7 Stuart Description Mains adapter, SM7/ for UK / Ireland, 0 V 0 Hz single phase supplies Mains adapter, SM7/ for continental Europe, 0 V 0Hz single phase supplies Vehicle battery adapter, SM7/ with cigarette lighter plug

7 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Magnetic stirrers / hotplates Magnetic stirrer MR Hei-Mi S/D/L Without heating. MR Hei-Mi S - Especially recoended for titration - Electronic speed control without digital display - Housing made of chemically resistant Polyamide - IP MR Hei-Mi D - Recoended for use in cell biology laboratories - Electronic speed control with digital display - Enhanced heavy-duty stirring magnet drives stirringbars with ease - Even after etended operation minor heat transferto the top plate only - IP MR Hei-Mi L - Same as MR Hei-Mi D, ecept for digital display Heidolph Type Rotation speed Stirring capacity Plate material Dimensions (W D H) Hei-Mi D Hei-Mi L Hei-Mi S rpm ml VA VA PVDF Magnetic stirrer, Mono With non-mechanical, electronic induction drive. For routine work. Constant rotation speed even if the viscosity of the stirring medium changes. With separate power supply for 0V 0/0 Hz. Thermo Electron Stirring capacity: Stirring output selectable: Dimensions (W D H): Operating conditions: Housing: Colour: ml to L W 00 to 990 rpm 80-0 to + C at 80% R.H. ma. Stainless steel Grey Mono, stainless steel, powder-coated Magnetic stirrer CB Speed range 00 to 00 rpm. Maimum volume stirred litres. Glass ceramic top plate 0 0. Overall (W D H) Electronic variable speed control with off position. With facility for mounting a. diameter retort rod at the rear of the case. With BioCote silver based antimicrobial protection. Stuart CB 9.90

8 Stirring, Shaking, Miing Magnetic stirrers / hotplates GENERAL CATALOGUE 007/08 Magnetic stirrer model Mobil direct For universal stirring applications in science and industry. Suitable for use with Thermo Electron heavy-walled reservoir bases, round bottom flasks and jacketed reaction vessels. Can also stir over larger distances (ma. 0 ). With long range, etremely powerful magnetic field, which produces dual torque when starting up. Offers optimal operation safety by consistent speed regulation and second quick-stop without motor overrun. Can be cleaned under running water. Supplied with mains adapter for 0 V 0/0 Hz. Stirring capacity: to 0 L Stirring output: 0 W 00 to 000 rpm Speed accuracy: ±0. % Dimensions (W D H): Operating conditions: -0 to + C at 9 %R.H. ma. Housing: Stainless steel Mobil direct Magnetic stirrer Mai direct With non-mechanical, electronic induction drive and dust/watertight, easy-clean stainless steel housing. Constant speed irrespective of load even if viscosity changes. Mai direct: With large footprint and a strong and more penetrating magnetic field. Not suitable for use in incubators. With mains adapter. Thermo Electron Stirrer: Operating conditions: Casing: 80 to 000 rpm -0 to + C at 9 % R.H. ma. Stainless steel Type Stirring capacity Power Dimensions (W D H) ml W Mai direct 00 to 000 to Magnetic stirrer Variomag Power Direct Super flat, powerful magnetic stirrer for volumes from 00 ml up to 0 litres, with long-range, magnetic field for stirring over long distances up to ma. 0, ideal for thick-walled, glass vessels, round bottom flasks or double-walled containers, wash- and abrasion-resistant, stainless steel housing, speed range 00 to 000 rpm with feedback control, quick stop within sec., -step stirring power adjustment (/0//0 Watt), digital speed display, bi-directional RS interface allowing up to units to be directly and individually controlled by the user's PC and V d.c. output, a.c. adapter for 00-0 V. Thermo Electron Dimensions (W D H): Ambient operating temperature: appro. kg -0 to +0 C and ma. 9% humidity Variomag Power Direct Magnetic stirrer, non-electric PP-ABS construction. This unique stirrer is operated either by water pressure between and. Kg/cm² ( to 0 psi) or by air pressure. No electrical supply is needed, thus eliminating heat, electric shock and eplosion hazards. Corrosion-proof, all-plastic construction. Can be used on the bench or clamped to a stand with a (½") diameter rod using the integral bosshead. Kartell Dia. Height

9 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Magnetic stirrers / hotplates Magnetic stirrer, compressed air Grade.0 stainless steel drive housing with aluminium cased, magnetic stirring head, incl. speed control valve, support arm with tubing nozzle and magnetic stirring head, output W, working pressure ma. bar. Volume stirred (water): ma. 0 litres. Maimum magnetic stirrer bar (L ): Other PLR compressed air drives with pump attachments, e.g. gear, magnetic, centrifugal and drum pumps, are available on request. Buddeberg Type Off-load Pressure Rating speed rpm. bar W PLR 0-V/M Multi-position magnetic stirrers, Ikamag RO /0/ Power series Unheated. For, 0, or stirring positions. For ma. 00 ml (HO) stirring volume per stirring position. Speed range 0 to 00 rpm. Super flat new design. With profiled, stainless steel surface to protect against liquid penetration and for easy cleaning. Serially arranged,,, or -stirring position platform arrays enable optimum use of bench space. Distance between stirring position centres: 90. Supply requirements: 0V 0 Hz. Accessory thermostatic bath fittings are available on request. Motor rating Input/Output: RO: 7./.8 W RO0:./. W RO:./. W Speed indication: Scale ( to 0) Type Dimensions (W D H) Weight Stirring positions RO RO 0 RO 8 7 g Multi-position magnetic stirrers, Biosystem and For cell suspension and tissue cultures. For biological and clinical cell culture applications. Completely germ-proof and in accordance with the hygiene requirements of the Genetic Engineering Safety Code. Ideal for long-term operation in CO incubators. Choice of models with or stirring positions. Slow, gentle running. Low-heat generation due to separately adjustable, remote controller. With digital speed indicator and timer. Cell culture bottles are available on request. Accessories required: Biomodul 0 B controller. Thermo Electron Stirring power: Operating conditions: Operating temp. in water: Housing: 0. to W to 0 rpm -0 to + C at 00 %R.H. 0 to +0 C Stainless steel Type Stirring positions Biosystem B Biosystem B Controller Biomodul 0B

10 Stirring, Shaking, Miing Magnetic stirrers / hotplates GENERAL CATALOGUE 007/08 Multi-position magnetic stirrers, Mobil 00 Without heating. With etremely strong, magnetic coupling power for very large stirring volumes in thick-walled vessels and over larger distances (ma. 0). Can be controlled remotely via a separate remote controller with digital speed indicator. Continuous or timed operation is selectable. Rapid stop in seconds without motor overrun. Running time can be preselected in accordance with the viscosity. Overload protected and housed in an easy to clean, hermetically sealed casing which can be washed under running water Also available to special order with 0 or 80 diameter central hole for biotech applications requiring minimal vibration and sterile stirring. Requires, but is not supplied with, Telemodul 0 M or 80 M controllers for operation (depending on output power required). Thermo Electron Volume stirred 0 M: to 0 litres 80 M: to 00 litres 00 to 990 rpm Speed uniformity: ±0. % Dimensions (W D H): Operating conditions: -0 to + C at 00 %R.H. Casing: Stainless steel Type Description Magnetic stirrer Mobil 00 Telemodul 0 M Telemodul 80 M Controller (0 W nominal capacity) for Mobil 00 Controller (80 W nominal capacity) for Mobil Accessories for multi-position magnetic stirrers, Mobil 00 Thermo Electron Type Description Stand with wheels Mount for stirrer and sample bottles for clamping control unit at optimal height on stand Multi-position magnetic stirrers, Poly With non-mechanical, electronic induction drive. With stirring spaces, for e.g. -litre erlenmeyer flasks or 0 ml beakers. For mass screening and biological applications, even in humidity incubators. With built-in controller, digital speed indicator and soft-start drive. With mains adaptor. Thermo Electron Stirring positions: Distance between stirring centres: Volume stirred: to 000 ml Stirring power: 0 W 00 to 990 rpm Dimensions (W D H): 0 0 Operating conditions: -0 to + C at 80 % R.H. ma. Housing: Stainless steel, powder coated Colour: grey Poly

11 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Magnetic stirrers / hotplates Multi-position magnetic stirrers, Telesystem With non-mechanical, electronic induction drive and dust/watertight housing. Ideal for batch series stirring and for use in water baths. Choice of -place stirring position models (0.) which can stir up to litre erlenmeyer flasks, -place models (.) for up to 0 ml beakers and 0-place models (0.) for small sample containers and, using appropriate test tube stands, up to 0 test tubes or centrifuge tubes. Can be remotely operated and is supplied with controller. Available as standard, high-power 0 watt or ultra high-power 0 watt versions. Telesystem 0.0, 0.0,.0,.0 and 0.0 controllers include freely selectable stirring and pause times. Model 0.0 controller has a built-in RS interface. Dimensions (W D H): 0 0 Operating conditions (in air): -0 to + C at 00% R.H. ma. Operating temp. range in water: (up to 9 C on request) 0 to +0 C Stirrer unit housing: Stainless steel Thermo Electron Type Stirring centre distances Stirring capacity Power Controller Telemodul Rotation speed ml W rpm 0 to Standard 0 to to 00 to 0 0 C 0 to 00 0 to 000 to 0 0 C 00 to 000 to 00 7 Standard 0 to 000 to 000 to 0 0 C 0 to 00 to 00 to 0 0 C 00 to 000. to 0 7 Standard 0 to 000. to 0 to 0 0 C 0 to 00. to 00 to 0 0 C 00 to Multi-position magnetic stirrers, Multipoint With non-mechanical, electronic induction drive. Ideal for batch series stirring. Choice of Thermo Electron -place, stirring position models which can stir up to litre erlenmeyer flasks or -place models for up to 0 ml beakers. With digital stirring speed display and soft-start function. With adjustable power level stirring speeds ( to 0 W), easy to clean, hermetically sealed casing which can be washed under running water, ultra flat, space-saving profile and 00% synchronous speed control in all stirring positions. Supplied with mains adapter for 0 V 0/0 Hz. Dimensions (W D H): Operating conditions: Housing: 80 to 000 rpm to + C at 9 % R.H. ma. Stainless steel Type Multipoint Multipoint Stirring positions Stirring centre distances 0 Stirring capacity ml to 000 to Magnetic stirrer/hotplate RH basic Low-priced, magnetic stirrer with stainless steel hot plate - Fied overtemperature safety cut-out at 00 C - Soft-start motor Stirring volume: 0 litres Motor rating input/output: / W Speed indication: Scale (0 to ) Speed range 00 up to 000 rpm Heating power: 00 W Heating rate ( litre water) K/min Temperature range: Amb. to +0 C Hotplate surface: Stainless steel (AISI0) Ø = Dimensions (W D H): kg Enclosure according to DIN EN 09: IP Description RH basic

12 Stirring, Shaking, Miing Magnetic stirrers / hotplates GENERAL CATALOGUE 007/08 Magnetic stirrer/hotplates RH basic and RH basic KT/C RH basic KT/C: - large, chemically-resistant top plate - heating power: 00 W - high-efficiency hotplate - Long-life, foil heater with solid-state switch for heating control - adjustable overtemperature safety circuit: 00 to 00 C - Soft-start motor - Safety feature: in the event of motor failure the heating switches off automatically - Connection for an accessory contact thermometer in accordance with DIN 878 class, e.g. ETS-D RH digital KT/C safety control: - as RH basic KT/C, but additionally with digital indication of set and actual temperature. Specifications: Stirring volume: litres Motor rating / W input/output: Speed indication: Scale (0 to )/digital 00 to 000 rpm Heating power: 00 H Heat-up rate ( litre water). K/min Temperature range: Amb. to +0 C Sensitivity with sensor: ± K Hotplate surface: white coated, 0 0 Dimensions (W D H): kg Housing according to DIN EN 09: IP Description RH basic KT/C safety control RH digital KT/C safety control

13 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Magnetic stirrers / hotplates Magnetic stirrer/hotplate, Ikamag RCT basic safety control The new improved version with revolutionary technology and new functions: - Integral temperature control - Incl. Pt000 temperature sensor (Pt000.0) - Eact temperature and speed setting via digital display, even when switched off - Set safety temperature limit displayed digitally - Hot Top indicator >> hot surface warning to prevent burns! - Digital error code display - With adjustable safety circuit for hotplate temperature (0 to 0 C) - Safety magnetic stirrer with heating, suitable for unsupervised operation - DIN 878 connection for a contact thermometer, e.g. ETS-D, enables precise temperature control - High level of safety thanks to improved heat control technology - Enclosed housing (IP ) guarantees long service life - Highly polished aluminium heating plate for optimum heat transfer - Strong magnetic coupling Magnet stirrer: Stirring quantity ma. per stirring position (HO): Speed display: Ma. stirring bar (l ): 0 litres digital 0 to 00 rpm 80 0 Heating capacity: Heat output: 00 W Heating rate ( l HO in H):. K/min Temperature range: 0 to 0 C Control accuracy: ± K Temperature corrugation without sensor: ± K Adjustable safety area: 0 to 0 C Indication of temperature restricting with digital indication: 0 to 0 C Sensor in medium/ control accuracy: Pt000/± K ETS-D/±0. K ETS-D/±0. K Usable plate area: Plate material: aluminium alloy Dimensions: General information: Dimensions (W D H): kg Ambient operating temperature range: to 0 C Ma. operating humidity: 80 % Protection class according to DIN EN 09: IP RCT basic safety control with Pt 000 temperature probe

14 Stirring, Shaking, Miing Magnetic stirrers / hotplates GENERAL CATALOGUE 007/08 Magnetic stirrer/hotplates, Ika RET control visc/ RET control visc C safety control Safety magnetic stirrer/hotplates, suitable for unsupervised operation. - Options available: Pt00 sensor for controlling heated medium temperature or separate Pt000 temperature sensors for monitoring heat transfer fluid and heated medium (automatic identification) - adjustable safety circuits - Stirring bar crack detection - Fuzzy control and microprocessor technology guarantee maimum control accuracy - Easy-to-read backlit LCD Display - Actual medium temperature display resolution: 0. K (up to 00 C); K (above 00 C) - Setting acc. medium temperature: ±0. K - PC control via RS-interface, with optional safety function. - labworldsoft software is available to control and document all measuring values via PC - "Hot" warning display indicating presence af any residual heat when the unit is switched off - Protection cover H 99 included Stirring Ma. stirring vol. (water): Motor rating input/output: Ma. stirring bar L : 0 litres / W 0 to 00 rpm 80 0 Heating Heat output: 00 W Temperature range: Amb. to 0 C Sensor for monitoring medium temp.: Pt00 or Pt000 Hotplate Diameter: RET control-visc: stainless steel General data RET control-visc C: stainless steel, white coated Dimensions (W D H): kg Protection class acc. to DIN EN 09: IP RET control visc C safety control RET control visc safety control Temperature sensor for RET control-visc safety control separate sensors for heat transfer fluid and medium. Description Stainless steel, PT Stainless steel, glass coated, for corrosive media Stainless steel, with MAS 0 plug Stainless steel, glass coated, for corrosive media, with MAS 0 plug

15 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Magnetic stirrers / hotplates Electronic Contact thermometers ETS-D and ETS-D ETS-D/ETS- D Patented: possible operation modes guarantee optimum adjustment to your application: - Operating mode A Suitable for work with varying parameters (from -0 C to 0 C). Adjustable safety temperature - Operating mode B Suitable for repeated operation under uniform conditions and parameters - Operating mode C Suitable for unsupervised operation - With optimised PID control - Reset function - Incl. stainless steel sensor H - For all magnetic stirrers with a DIN 878 class contact thermometer connection, e.g. Ika, Heidolph and Corning with adapter AD-C ETS-D Additionally incorporates integral ph measurement, please order ph-electrode separately e.g. inlab 07 (9.0 0), with BNC plug Technical Data Temperature Measuring range: Resolution: ETS-D: ETS-D: Accuracy*: ETS-D: ETS-D: Control accuracy: Control accuracy (with sensor) ETS-D: ETS-D: -0 to +0 C ±0. K ±0.0 K ±0. K ±0.0 K 0. K ±0. K ±0. K ph-measurement, ETS-D only Measuring range: 0 to Resolution: ±0. ph Accuracy: ±0.0 ph Voltage: 8 to V d.c. Current (at 9 V) ETS-D: 0 ma ETS-D: ma Operating range: 0 to 0 C Ma. R.H.: 80% Protection class: IP Connector: -pole, DIN 0. kg Type Dimensions (W D H) ETS-D 8 8 ETS-D 9 98 *Sensor: Pt000 DIN IEC 7 Class A Accessories for ETS D + ETS D contact thermometer Bosshead Stainless steel support rod Replacement sensor, stainless steel Stainless steel sensor, glass sleeved Etension cable, metre Power pack set Holding rod

16 Stirring, Shaking, Miing Magnetic stirrers / hotplates GENERAL CATALOGUE 007/08 Magnetic stirrer/hotplates, RET basic and RET basic C safety control Magnetic stirrers with improved heating and stirring technology. RET basic (with stainless steel top plate) and RET basic C (white coated hotplate) feature: - Etremely rapid heating times - Very high hotplate temperatures (amb. to 0 C) - Adjustable temperature limiter (0 to 80 C) - Electronic speed control - Wide speed range (0 to 00 rpm) - DIN 878 socket for connecting an electronic contact thermometer - Supplied with housing protection (working) cover, H99. Magnetic stirring Volume stirred (water): 0 litres Motor rating input/output: / W Speed adjustment: Dial 0 to 00 rpm Maimum magnetic stirrer bar (L ): 80 0 Heating Heat output 00W Temperature range: Amb. to 0 C Adjustable overheat protection: 0 to 80 C Setting accuracy: ±0 K Media temp. probe: ETS-D fuzzy Control accuracy with temp. probe: ± K Hotplate material: Stainless steel (RET basic) White coated (RET basic C) Maimum load: kg Hotplate : Dimensions (W D H): kg Protection system to DIN EN 09: IP Voltage/Frequency: 0V 0/0Hz RET basic safety control RET basic C safety control

17 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Magnetic stirrers / hotplates Magnetic stirrer/hotplates MR Hei-Standard/Hei-Tec/Hei-End With heating. MR Hei-Standard - Hot plate made of Silumin (aluminium-silicon alloy) with ceramic coating: ecellent heat conduction and distribution, etremely resistant against scratches and chemicals - Plate diameter: - Etra safety control circuit and hot plate cut-out by two independenttemperature sensors - An independent safety circuit with separate circuit switches off the heating if the set hotplate temperature is eceeded by 0 C - Connector for electronic temperature control (optional EKT Hei-Con) - Accuracy temperature setting: ±K with EKT Hei-Con (optional) - Sample medium temperature control accuracy: ±K with EKT Hei-Con (optional) MR Hei-Tec As MR Hei-Standard, but with digital display for speed and temperature MR Hei-Tec [ ] As MR Hei-Tec, but with hotplate MR Hei-End As MR Hei-Tec, but additionally with: - Independent safety circuit switches off the heating if a predeterminedtemperature difference (T) above set temperature is reached - No accidental temperature setting - Digital display for speed and temperature (both set and actual) - RS interface Heidolph Specifications Speed, ma.: 00 rpm Heating power: 800 W Hot plate temperature: 0 to 00 C Medium temperature, ma.: 0 C Stirring capacity, ma. (HO): 0 litres Dimensions (W D H): kg Protection class (DIN 09): IP MR Hei-Standard MR Hei-Tec MR Hei-Tec [ ] MR Hei-End Contact Thermometer EKT Hei-Con - Can be combined with models Hei-Tec, Hei-Tec [ ] and Hei-Standard - Avoids sample medium temperature overshoots - Temperature sensor on a fleible lead avoids damage to the controllercaused by heat and vapours - With clear double-spaced display - Separate digital displays for set and actual temperature - Tendency signal for rising sample medium temperature - Safety and control circuit complies with DIN 878, class and Supplied with different clamps for attachment to rods with either 0 or. Please order rod and temperature sensor holder separately Heidolph Technical specifications Temperature range: -0 to +00 C Resolution: K Accuracy: ±K Response:. sec Control accuracy: ±0. K Sensor length: 0 Cable length: 700 Min. i. depth: 0 Dimensions (W D H): 0. kg Protection class (DIN 09): IP 0 Type Description EKT Hei-Con EKT Hei-Con G stainless steel sensor (VA) glass coated sensor

18 Stirring, Shaking, Miing Magnetic stirrers / hotplates GENERAL CATALOGUE 007/08 DrySyn heating attachments Insert heating blocks for round bottom flasks and cylindrical reaction vessels - Up to reactions at the same time - Clean and safe alternative to an oil bath - Greater versatility, do any combination of reaction adapters - Powerful stirring in all configurations - Controlled heating and temperature control - Temperature sensor fits directly in insert for greater accuracy - No special glassware required, no additional costs - Setting up reactions is easy with the DrySyn clamp Heidolph Type Description Set DrySyn MULTI Set DrySyn MULTI M DrySyn MULTI Clamp DrySyn MULTI M Clamp Base incl. inserts for round bottom flasks ml, 0 ml or 00 ml Base incl. inserts for round bottom flasks 00 ml or 0 ml position clamp incl. bosshead position clamp incl. bosshead Round bottom flasks - please see page Magnetic Stirrer/Hotplate, CD Maimum speed 00 rpm, volume stirred litres, and temperature 00 C. Glass ceramic top plate 0 0, accoodating beakers up to litres capacity. With digital setting and control, via a bright, fluorescent display which also simultaneously displays set and actual temperature to C and speed to 0 rpm, separate safety circuit, dial setting, stirrer 'on' and heater 'on' warning indicators (the heater lamp flashes whilst plate temperature remains above 70 C). A PTFE-coated, remote temperature probe which allows control of liquid temperature to ±0. C and up to 00 C is also provided and facility for mounting a. retort rod at rear of the case. Overall (W D H) Weight. kg. For 90-0V 0/0Hz single phase supplies. Hotplate rating 70W. With BioCote, silver-based, antimicrobial protection. Stuart CD Magnetic Stirrer/Hotplate, CB Maimum speed 00 rpm, volume stirred litres. Maimum temperature 0 C. With glass ceramic top plate 0 0, microprocessor controlled heating with separate safety circuit to prevent overheating, variable speed control with off position, stirrer 'on' andheater 'on' warning lamps. With facility for mounting a. diameter retort rod at rear of the case. Overall (W D H) Weight. kg. For 90-0V 0/0Hz single phase supplies. Hotplate rating 0W. With BioCote, silver-based, antimicrobial protection. Stuart CB

19 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Magnetic stirrers / hotplates Stirrer hotplates, CB0 and SB0 - Choice of robust aluminium or chemically resistant, ceramic top plate - Flashing "Hot" warning light to warn when top plate is too hot to touch - Independent safety circuit to protect against overheating - Powerful stirring action up to 00 rpm and volumes of up to litres - Ideal for handling large vessels - Fitting for retort rod and supplied complete with PTFE coated stir bars. Model CB0 has a glass ceramic top that has ecellent chemical and temperature resistance. The chemical properties make the surface very easy to keep clean and the thermal properties allow very high plate temperatures while ensuring the edges stay cooler, reducing the chance of accidental burns. Model SB0 has a robust aluminium/silicon alloy top plate. The very good heat transmission of this material gives rapid heating and ensures even temperature distribution across the whole of the plate. With BioCote, silver based, antimicrobial protection. Stuart Specifications Plate dimensions: Heated area: CB SB Heater Power: CB0 00 W SB0 00 W Stirrer speed range: 00 to 00 Overall dimensions (W D H): kg Supply requirements: 0 V, 0 Hz Maimum stirring capacity: litres Ma. plate temperature: CB0 SB0 0 C 00 C Type Description CB0 SB0 SR Ceramic plate, 00 W Aluminium plate, 00 W Retort Rod 00. Magnetic stirrer/hotplate, SD Maimum speed 00 rpm, volume stirred litres and temperature C. Cast aluminium/silicon alloy hotplate 0 0, accoodating beakers up to litres capacity. With digital setting and control, via a bright, fluorescent display which also simultaneously displays set and actual temperature to C and speed to 0 rpm, separate safety circuit, dial setting, stirrer 'on' and heater 'on' warning indicators. A PTFE-coated remote temperature probe which allows control of liquid temperature to ± C and up to 00 C is also available and a facility for mounting a. diameter retort rod is provided at the rear of the case. Overall (W D H) Weight. kg. For 90-0V 0/0Hz single phase supplies. Hotplate rating 70 W. With BioCote, silver-based, antimicrobial protection. Stuart SD Magnetic stirrer/hotplates, multi-position, Ikamag RT /0/ power High performance, multi-position magnetic stirrer/hotplates with integral temperature control. Precise temperature distribution and simultaneously running stirring positions as indicated. Specifications 0 to 00 rpm Maimum hotplate temperature: 0 C Ma. capacity per stirring position: 0. litres Stirring point separation: 90 Motor rating input/output: RT: 7./.8 W RT0:./. W RT:./. W Speed indication: Scale ( to 0) Type Dimensions (W D H) Weight Stirring positions RT power RT 0 power RT power g

20 Stirring, Shaking, Miing Magnetic stirrers / hotplates GENERAL CATALOGUE 007/08 Magnetic stirrer/ hotplate SB Maimum speed 00 rpm, volume stirred litres, and temperature C. Cast aluminium/silicon alloy hotplate 0 0, accoodating beakers up to litres capacity. With microprocessor speed and temperature control with separate safety circuit, arbitrary scaled dial setting, stirrer 'on' and heater 'on' warning indicators and facility for mounting a. retort rod at the rear of the case. Overall (W D H) Hotplate rating 70 W. With BioCote, silver-based, antimicrobial protection. Stuart SB 9.90 Magnetic stirrer/hotplate, -Position, SB- Maimum speed 00 rpm. Maimum temperature C. With independently adjustable aluminium hotplates 0 0, overheat protection mechanism and warning light which switches on when the plate temperature eceeds 0 C. With facility for mounting a. retort rod at the rear of each plate and PTFE coated followers. Overall (W D H) Weight kg. For 0V 0/0Hz single phase supplies. Hotplate 0 W. With BioCote, silver-based, antimicrobial protection. Stuart Type Stirring positions SB Magnetic stirrer/bath systems, and 0-place Comprise remote-controlled, non-mechanical, electronic induction drive magnetic stirring Thermo Electron system with, or 0-place (Type 0.,., 0.) stirring positions,controller and maintenance-free, hermetically sealed, waterproof stirring platform, mounted in a transparent acrylic bath fitted with a thermostatic iersion controller with circulation pump. The stirring platform can also be mounted below the bath tank. Choice of stirring power versions: 0 watt models for basic requirements or 0 watt models for more demanding stirring and miing processes, e.g. in bacteria culture. Temperature control up to +0 C (stirring platform directly in bath) or up to +0 C (stirring platform below bath). Versions up to +9 C are available on request. Dimensions (W D H): Heating: 00 W Operating conditions: 0 to +0 C at 80% R.H. ma. Stirring system housing: Stainless steel Type Stirring centre distances Stirring capacity Power Controller Telemodul Rotation speed ml W rpm 0 to 800 to 0 0 C 0 to 00 0 to 00 to 0 0 C 00 to 000 to 00 to 0 0 C 0 to 00 to 000 to 0 0 C 00 to 000. to 0 to 0 0 C 0 to 00. to 0 to 0 0 C 00 to Magnetic stirrers, RM series For use in conjunction with standard heating mantles from 00 ml to 000 ml. With 0 diameter stirring dome to fit aperture in base of mantle. Range: 00 to 00 rpm With heating plates and connection for contact thermometer KT. RM 00 RM 00 with adapter

21 GENERAL CATALOGUE 007/08 Digital Contact thermometer KT Suitable for attachment and control of magnetic stirrer/hotplates RM 00. Digital display. Measuring range: -0 C to +00 C Stirring, Shaking, Miing Magnetic stirrers / hotplates KT Magnetic stirring bar set, RS Comprises one each, plain, cylindrical flon stirring bars, 0 to 80 long and and long Trika triangular bars. Set-RS Magnetic stirring bars, cylindrical Encapsulated in PTFE. Cylindrical. Round, smooth surface. Versatile. Further sizes available on request. Length Dia Magnetic stirring bars, triangular Plastibrand. PTFE. Triangular. Wedge-shaped, ideal for dissolving solids and re-suspending sediments due to scraping action. Angular surface produces high turbulence, even at low stirring speeds. Length Dia Magnetic stirring bars, dumbbell Plastibrand. PTFE. Dumbbell-shaped. Ecellent centring, low surface contact and high turbulence even at low stirring speeds, ends 0 Stem diameter: 8 Length Magnetic stirring bars, oval Encapsulated in PTFE. Oval. Ideal for round bottom flasks. Length Dia BRAND BRAND BRAND Bohlender 7

22 Stirring, Shaking, Miing Magnetic stirrers / hotplates GENERAL CATALOGUE 007/08 Magnetic stirring bars, spherical PTFE. For test tubes or vigorous, eccentric stirring. Dia BRAND Magnetic stirring bars, Starhead Type 00. Teflon PTFE-coated Alnico-V-Magnet. Syetrical stirring fins above and below generate a strong vorte action, even at low speeds. For flat or round bottom containers. Resistant to chemicals and temperatures up to +0 C. Autoclavable. Nalgene Dia. Height Magnetic stirring bars, Komet Ultra strong SmCo magnetic core, giving up to higher torque than conventional magnetic bars, ideal for highly viscous materials and difficult stirring conditions, PTFE-coated and autoclavable without demagnetization. New feature: Komet discs and rings for vertical operation, ideal for test tubes. Type Description Dia. Length Komet 90 Komet 0 Komet 0 Komet Round form Round form Round form Round form Beaker insert stirrers, Magneto-stabil For all beakers from 00 to 000 ml capacity. Comprises conical lid made of chemical-resistant plastic with stirrer bearing, two pipette openings and captive Teflon magnetic stirring bar with support shaft. Guarantees gentle running, with no de-coupling of the stirrer bar. Schütt Type For neck 0 to 9 8 to 8 0 to Magnetic stirring bar retrievers Plastibrand. PTFE. Fully encapsulated magnetic core. BRAND Length Dia Magnetic stirring bar retrievers PE. With fully encapsulated magnet at one end and a retaining ring at the other. VITLAB Length

23 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Overhead stirrers Overhead stirrers RW basic "Lab egg" Colour-coded, laboratory stirrers for low volumes up to litres (water) with a unique design. The lower half, which is eposed to the vapour from the medium being processed, is constructed in high quality borosilicate glass. This glass section is available in a choice of different colours. A blade rotor is included. Can be used worldwide with a voltage range of 00 to 0 V. Specifications: Motor rating, input/output: 8/ W Viscosity range: 0 to 00 m Pas 0 to 000 rpm Dimensions (W D H): kg Housing IP rating to DIN EN 09: IP Colour Salmon pink Creamy blue Lavender white Transparent Overhead stirrer RW basic Quiet, economical laboratory stirrer with direct motor drive which can be infinitely adjusted by electronic means. For stirring substances of low to medium viscosity. Specifications Stirring quantity ma. (HO): 8 litres Viscosity ma.: 0000 mpas Motor rating input /output: 8. W/7 W Output ma. at stirring shaft: 7 W Permissible ON time: 00% Torque ma. at stirring shaft: 8 Ncm 00 to 000 rpm Speed display: scale Chuck range diameter: 0. to 8 Etension arm diameter/length: /0 Dimensions (W D H): Ambient operating temp. range: kg to 0 C Ma. operating humidity: 80% Protection class according to DIN EN 09: IP RW basic Overhead stirrer RW basic For simple stirring tasks up to 0 litres (water). With stepless adjustment without gear changing, compact housing and quiet operation. With safety circuit. Non-locking, overload capacity. Specially suitable for schools, universities and test laboratories. Specifications: Stirring volume (ma.): 0 litres Viscosity range: 0000 mpas. Motor rating input/output: 7/ W Output ma. at stirring shaft: W Torque ma. at stirring shaft: 0 Ncm 0 to 00 rpm Speed indication: Scale ( to 0) Chuck shaft range: 0. to 0 Dimensions (W D H): Supply requirements: 0V 0/0 Hz.8 kg Protection class (DIN EN 09): IP RW basic 9.8 9

24 Stirring, Shaking, Miing Overhead stirrers GENERAL CATALOGUE 007/08 Stands Description Rod Ø Height Ma. load H-stand Stand with baseplate Stand with baseplate Stand with baseplate Stand with baseplate Telescopic stand Telescopic stand Floor stand to to to 80 kg Bossheads Type R 8 R 70 R 7 Jaw opening Stand / etension arm: to Stand / etension arm: to / to Stand / etension arm: / Strap clamps Type RH RH * *with R 70 bosshead Rod Ø 8 to to Vessel Ø 0 to 00 0 to Rotor shields For EUROSTARs, RW basic, RW 0 digital RW 7 D Fleible clutch Required for stirring tasks using glass stirring rods. The fleible coupling compensates for any structural variances. Clamping range: to 0 Torque ma. 0 Ncm FK Speed meter (tachometer) Connection of an opto-electronic sensor enables measurement of rotating shaft speed from 0 to 0000 rpm. The signals received are displayed on the monitor. This enables all Ika overhead stirrers and homogenising instruments to be retrofitted with a speed display, thereby allowing reproducible work. An RS interface allows the values to be recorded digitally on a PC. An analogue output signal for a recorder is also available. The monitor can be used as a table-top device or mounted on a retort stand rod. Specifications Sensor: DZM-S.o 0 to 0000 rpm Temperature coefficient: 0.00 %/ C Measuring error of the measured value: 0. % = Digit Analogue signal (0 to 000 rpm): mv Analogue signal (> 000 rpm): 0. mv Interface: RS Dimensions (W H D): kg Ambient operating temp. range: to 0 C Ma. operating humidity: 80 % Protection class according to DIN EN 09: IP Type Description For DZM control.o Speed meter T basic ULTRA-TURAX

25 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Overhead stirrers Overhead stirrer Eurostar digital An economically priced stirrer suitable for up to 0 litres of low to medium viscosity liquids. Continuously variable, microprocessor controlled speed range 0 to 000 rpm. with digital speed display. With 0. to 0 i.d. hollow-shafted chuck and clamping rod for mounting on a stand. Supplied without rotor. Specifications Stirring volume (ma.): 0 litres Viscosity limit: 0000 mpas Motor rating input/output: 7/ W Output ma. at stirring shaft: W Torque ma. at stirring shaft: 0 Ncm 0 to 000 rpm Chuck shaft range: 0. to 0 Dimensions (W D H): kg Supply requirements: 0 V 0/0 Hz Protection class DIN EN 09: IP Eurostar digital Overhead stirrer RW 0 digital - With digital display - robust, slimline, ergonomic design - technical improvements on the trusted RW 0 series design - with constant power-drive - two speed ranges for universal use from 0 to 000 rpm - hollow-shafted chuck for rotor shaft height adjustment (only when stationary) Specifications Ma. stirring volume (HO): 0 l Viscosity range: up to 0000 mpas Motor rating input/output: 70/ W Output ma. at stirring shaft: W Speed range I (at 0 Hz): 0 to 00 rpm Speed range II (at 0 Hz): 0 to 000 rpm Supply requirements: 0V 0/0 Hz Ma. stirring shaft torque (at 00 rpm.): 0Ncm Protection class (DIN EN 09): IP 0 Type Width Depth Height Weight kg RW 0 digital Overhead stirrers, Eurostar power basic/control-visc Single-range, high torque, laboratory overhead stirrers with powerful, 0 Watt motors. Provide constant torque over their entire speed range from 0 to 000 rpm. The Eurostar Power control-visc also has an RS interface for control via the user's PC, an integral digital torque trend and speed display as well as an analogue interface for documentation of speed range and aial torque. Supplied without rotor. Specifications Stirring quantity (ma): 0 l Viscosity limit: 0.000mPas Motor rating input/output: 0/0 W Output ma. at stirring shaft: 0 W Torque ma. at stirring shaft: 0 Ncm 0 to.000 min Chuck range: 0. to 0 Overall (W D H): kg Supply requirements: 0V 0/0 Hz Protection class DIN EN 09: IP Eurostar power basic Eurostar power control-visc Further agitators for the "high viscosity" range (Eurostar power control visc P, P and P7) on request

26 Stirring, Shaking, Miing Overhead stirrers GENERAL CATALOGUE 007/08 Remote Control RC For operating the Eurostar power control-visc stirrers (also P, P and P7) via a cable length of up to 0 metres. - trouble-free control of stirrers even on raised scaffolding constructions - selectable display of set and actual values - displays actual speed, target speed and overload status Specifications Power supply:. V AA batteries (included in delivery) Ma. cable length: 0 m Remote control power consumption Turned off: about 7 µa Turned on: about 7 ma Dimensions (W D H): 0 0 Weight (incl. battery): 0. kg RC Overhead stirrer RW 8 basic Highly efficient, -range (high speed or high torque), mechanically controlled, overhead stirrer for volumes up to 80 litres (water). Suitable for work in laboratories and technology colleges. Supplied without rotor. Specifications Ma. volume stirred (water): 80 litres Maimum torque at the chuck: 900 Ncm Ma. sample medium viscosity: 0000 mpas Speed range I: 0 to 00 rpm Speed range II: 0 to 00 rpm Chuck range: to 0 Output ma at stirring shaft: 90 W Motor rating input/output: 0/90 W Overall (W D H): 7. kg Supply requirements: 0 V 0 Hz Protection class DIN EN 09: IP RW 8 basic RW 8 D with three-phase motor available on request. Overhead stirrer RW 7 D The most powerful Ika stirrer for laboratory, technical school and pilot plant assemblies. - For stirring tasks up to 00 litres (water) - Two speed ranges provided for very viscous media and for intensive miing - Supplied without cables or plugs for operation. Specifications Ma. volume stirred (water): 00 litres Suitable for viscosities up to: mpas Motor rating input/output: /70 W Output at the shaft: 00 W Ma. torque at the shaft at 0 rpm Ncm at 00 rpm 000 Ncm at 000 rpm 8 Ncm Speed range I (at 0 cycles per second): 7 to 7 rpm Speed range II (at 0 cycles per second): 7 to 00 rpm Speed range I (at 0 cycles per second): 9 to 0 rpm Speed range II (at 0 cycles per second): 0 to 0 rpm Chuck clamping range: to Hollow shaft, inside diameter: Attachment: Flange Dimensions (W H D): 0 kg Housing IP rating to DIN EN 09: IP RW 7 D 9.8 7

27 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Overhead stirrers Propeller stirrer, fine blade Type Stirrer Shaft Shaft length R Further stirrers - please see page 9 Propeller stirrer, -bladed Type R R R 0 R 0 Stirrer Shaft Shaft length Rotation speed rpm Propeller stirrers, -blade Type Stirrer Shaft Shaft length Rotation speed rpm R R R R R 89 (PTFE) Turbine stirrer rotors Type R R R Stirrer Shaft Shaft length Rotation speed rpm Dissolver stirrers Type R 00 R 0 R 0 Stirrer Shaft Shaft length Rotation speed rpm Centrifugal stirrers Type R R Stirrer Shaft Shaft length Rotation speed rpm 0/ / Paddle stirrers 7 Type R 7 R 7 R 7 R Stirrer Shaft Shaft length Rotation speed rpm

28 Stirring, Shaking, Miing Overhead stirrers GENERAL CATALOGUE 007/08 Anchor stirrers Type R 0 R R (PTFE) R Stirrer Shaft Shaft length Rotation speed rpm Kneading stirrer Type Stirrer Shaft Shaft Rotation length speed rpm R Overhead stirrers, RZR 0, RZR 0 control General features: - Consistently high torque over full operating speed range - Constant speed even when viscosity changes - Digital torque setting and speed display - Set speed displayed when stirrer at rest - Withstand peak overloads up to 00% - Integral serial interface and analogue output (0 to 0 V) Model RZR 0 control: - standard stirrer as described - single speed range setting - speed range 0 to 000 rpm - output power 0 W - ma. torque 0 Ncm (0 Ncm in continuous operation) - viscosity range up to 0000 mpa s Model RZR 0 control: - standard stirrer as described - single speed range setting - speed range 0 to 000 rpm - ma. torque 80 Ncm (90 Ncm in continuous operation) - viscosity range up to 0000 mpa s Model RZR 0 control: - similar to RZR 0 but with - speed range settings - setting : to 00 rpm - setting : 0 to 000 rpm - output power 00 W - ma. torque 00 Ncm (00 Ncm in continuous operation) - viscosity range up to mpa s Model RZR 0 control Z: Similar to RZR 0 control, but with an additional planetary drive ( 8, H ) - Speed range stage : to 08 rpm - Speed range stage : 7 to 0 rpm - ma. torque 800 Ncm (700 Ncm in continuous operation) - viscosity range up to 0000 mpa s - supplied with 0. chuck Heidolph Type Power Speed range Ma. torque W rpm. Ncm RZR 0 control 0 0 to RZR 0 control 00 0 to RZR 0 control 00 : to 00, : 0 to RZR 0 control Z 00 : to 08, : 7 to Speed control Digital Digital Digital Digital

29 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Overhead stirrers Overhead stirrers, RZR 00, RZR 0, RZR 0 General features - Impact and chemical resistant casing - Highest torque in their class - Suitable for unsupervised continuous operations - Optimum safety with overheat cut-out Mechanical overhead stirrers - Standard equipment for every laboratory - speed range setting system for optimal torque - Fully adjustable, dial control speed setting from 0 to 000 rpm. - Withstand peak overloads up to 00% RZR 00: - Medium duty stirrer for up to litres of low viscosity liquids - ma. torque 00 Ncm - output power 7 W - speed control dial - viscosity range to 0000 mpa s RZR 0: - Similar to RZR 00 but with - digital speed display for reproducible results - viscosity range to 0000 mpa s RZR 0: - Higher power stirrer - ma. torque 0 Ncm - Output power 7W - digital speed display for reproducible results. - viscosity range to mpa s For 0V 0Hz supplies. Heidolph Type Power Speed range Ma. torque Speed control RZR 00 RZR 0 RZR 0 W rpm. Ncm 7 : 0 to 00, : 00 to : 0 to 00, : 00 to : 0 to 00, : 00 to dial digital digital Accessories for stirrer motors Heidolph Stand clamp for holder rod to Chuck, clamping range 0. Stand S, 0 700,.8 kg Stirrer shaft guard, Pleiglass, height-adjustable Stirrer blades and shafts for overhead stirrers Heidolph Type Material Dimensions Shaft Blade stirrer BR 0 ( blades) V A 0 8 Blade stirrer BR ( blade) V A 0 8 Blade stirrer BR V A 0 8 Blade stirrer BR V A Blade stirrer BR V A Turbine stirrer TR 0 V A 9 8 Turbine stirrer TR V A 0 8 Propeller stirrer PR 0 V A 8 8 Propeller stirrer PR V A 8 (with guide ring) Propeller stirrer PR V A 8 (with guide ring) Propeller stirrer PR V A 8 (with guide ring) Propeller stirrer PR 9 PTFE 7 8 Anchor stirrer AR 9 PTFE Half-moon stirrer HR 8 PTFE

30 Stirring, Shaking, Miing Overhead stirrers GENERAL CATALOGUE 007/08 General purpose stirrers, SS0, SS0, SS0 Choice of stirring capacities: - SS0, up to litres - SS0, up to litres - SS0, up to 0 litres with dual torque range - Sophisticated speed control with feedback monitoring and soft-start - Keyless chuck allows fast and easy rotor fitting - Power lead is fed through the stirrer support arm keeping it away from moving parts - Overload protection facility - 0V 0Hz With BioCote silver based antimicrobial protection. Stuart Type Speed range Viscosity ma. Torque Dimensions (W D H) rpm. mpa. Nm SS0 00 to SS0 00 to SS0 0 to 00 / / to Overhead Stirrer shafts Stainless steel. Supplied as separate 8 diameter shaft with tapped screwthread end onto which can be attached a choice of paddle types. Lengths as indicated. Stuart Shaft, 0 long Shaft, 0 long Paddles For use with and shafts. Stuart Large Anchor Small -blade propeller -blade propeller Further stirrers - please see page 9 Compressed air stirrers type PLR Basic models include: - PLR motor - all-stainless steel housing, grade.0 - continuously adjustable, fine control valve speed regulation - support arm with 9 nozzle tubing connector - operating pressure ma. bar - power output 00 W at bar - clockwise rotation - air consumption 0 L/min. at bar - output shaft (L ): 0 - stirring capacity ma. L Type PLR 0 constructed to E II G c IIB T and types PLR - PLR constructed to E II G c IIB T according with Directive 9/9 EG (ATEX). Buddeberg Type PLR 0 PLR PLR PLR Off-load speed rpm Torque Gears For fluid viscosity Nm 0. 0 low. medium. high.0 maimum

31 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Overhead stirrers Compressed air stirrer type PLR with tachometer Basic models include: - PLR motor - all-stainless steel housing, grade.0 - analogue tachometer - continuously adjustable, fine control valve speed regulation - support arm with 9 nozzle tubing connector - operating pressure ma. bar - power output 00 W at bar - clockwise rotation - air consumption 0 L/min. at bar - output shaft (L ): 0 - stirring capacity ma. L Type PLR 0 T constructed to E II G c IIB T and types PLR T - PLR T constructed to E II G c IIB T according with Directive 9/9 EG (ATEX). Buddeberg Type PLR 0T PLR T PLR T PLR T Off-load speed rpm Torque Gears For fluid viscosity Nm 0. 0 low. medium. high.0 maimum Compressed air powered stirrers, PLR, accessories Fig. : Chuck: For quick, easy attachment of stirring rods. Not to be used in potentially eplosive atmospheres. Buddeberg Fig. : Connection couplings: Fied-diameter connection for motor/magnetic coupling drive shaft and stirring rod. Suitable for use in potentially eplosive atmospheres. Fig. : Fleible glass tube couplings: For stirring tasks using glass stirring rods. Elastic connector between motor and stirring shaft. Provides eact alignment of motor and shaft, and evens out aial and height differences. Accepts to 0 diameter shafts. Fig. : Fleible glass tube couplings: For stirring tasks using glass stirring rods. Elastic connector between motor and stirring shaft. Provides eact alignment of motor and shaft, and evens out aial and height differences. Output drive accepts to 0 diameter shafts, input shaft receiver fits 0 or 0/ diameter drives, secured by allen screws. Fig. 7: Double-Cardan-Coupling: With 8 heagonal input drive receiver and square socket drive output. Type Description F 8 VK 0 VK 0 8 VK 0 0 K 0 K 0/ 0 0/ DCK Chuck for shafts 0. to 8. (Fig. ) Connection coupling (Fig. ) Connection coupling (Fig. ) Connection coupling (Fig. ) Fle coupling receiver inner diam. 0 (Fig. ) Fle coupling receiver inner diam. 0/ (Fig. ) Fle coupling receiver inner diam. 0 (Fig. ) Fle coupling receiver inner diam. 0/ (Fig. ) Stainless steel, L = 0 (Fig. 7) Floor stand With angle foot, side length 00, rod Ø. Buddeberg Length

32 Stirring, Shaking, Miing Overhead stirrers GENERAL CATALOGUE 007/08 Stirrer glands (stirrer guides), ground glass joint Duran. Other materials used: PTFE (bearing), silicone (gasket) and PBTP (screwcap). Cone size 9/. Guide bore 0 i.d. Lenz With precision-formed, cylindrical sleeve With PTFE bearing KPG stirrer bearings Duran. Interchangeable. Bearing surface ground. With or without standard ground cone NS 9/. SCHOTT Duran Type Cone Dia. Height HA 0 HB 0 HB HQ 0 HT 0 HT NS no 0 no 0 7 no 90 yes 0 7 yes 0 yes 8 KPG stirrer shafts Duran. Interchangeable. Bearing surface ground and polished. WB: shaft only Type Dia. Length WB 0 WB KPG stirrer shafts Duran. Interchangeable. Bearing surface ground and polished. SCHOTT Duran SCHOTT Duran WG: WS: KPG : KPG length: fied blades movable blades 0 0 Type Length For neck WG 0 WG 0 WG 0 WG 0 WS 0 WS 0 WS 0 WS Magnetic stirrer drive bearing MRK series with ground joint With permanent magnetic coupling, absolute gas and vacuum-tight construction and resistant to acids and alkaline solutions. Constructed in Cr/Ni/Mo materials to DIN. X. Viton O-ring seals on the cone prevent heat epansion or clamping on the glass joint. Provides a low friction bearing for any drive. Maimum speed: 00 rpm. There is no through-shaft, as the drive and impellor elements are magnetically coupled. Alternative torque sizes, stirrers and special materials available on request. Buddeberg Type Joint size Torque For fluid viscosity Capacity MRK /0 MRK /0 MRK /90 MRK /0 MRK /90 NS Nm mpa. ml 9/ / / / /

33 GENERAL CATALOGUE 007/08 KPG stirrers Choice of interchangeable paddles and shafts for use in flasks as indicated. Stirring paddles are. thick Teflon. Stirring shafts are 0 diameter Duran glass. Stirring, Shaking, Miing Overhead stirrers Type Width Length For flasks ml Stirring paddle 8 0 Stirring paddle 7 00 Stirring paddle Stirring paddle 0 Stirring paddle 8 0 Stirring paddle L/ L Stirring paddle 0 L/ L Stirring shaft to fit paddles with width - - Stirring shaft to fit paddles with width 8/ Stirrer rotors, crescent-shaped paddle PTFE-coated stainless steel shaft with solid PTFE paddle which pivots into a keyhole frame allowing insertion through narrow mouthed vessels. The stainless steel core provides the required rigidity. They can therefore easily be clamped into overhead stirrer chucks. Since the medium only comes in contact with PTFE, the rotors are almost entirely chemically and temperature resistant. Bola stirrer rotors correspond dimensionally with (KPG) glass stirring shafts and can therefore be interchanged at any time. Bohlender Length Shaft To fit chuck Paddle Overhead stirrer rotors, -blade propellor Bohlender Length Shaft To fit chuck Paddle Overhead stirrer rotors, Mai propeller Bohlender Length Shaft To fit chuck Paddle Overhead stirrer rotors, impellor Bohlender Length Shaft To fit chuck Paddle

34 Stirring, Shaking, Miing Overhead stirrers GENERAL CATALOGUE 007/08 Overhead stirrer rotors, centrifugal paddle Bohlender Length Shaft To fit chuck Paddle Overhead stirrer rotors, anchor Bohlender Length Shaft To fit chuck Paddle Stirrer rotor, PP propeller With four-bladed, PP propeller. PE-coated, metal stirrer shaft. BRAND Dia. Length Rotor Paddles, blade propeller Stainless steel. For stirrer rotors with M thread. Type Blade blades, M blades, M blades, M blades, 90 offset, M blades, 90 offset, M blades, 90 offset, M Paddles, blade propeller Stainless steel. With screwthread fitting as indicated. Type Blade blades, M thread blades, M thread blades, M thread blades, M thread blades, M0 thread Paddles, blade propeller Stainless steel. With screwthread shaft connection as indicated. Description Blade blades, M thread blades, M thread blades, M thread blades, M thread blades, M0 thread blades, 90 offset, M thread blades, 90 offset, M thread blades, 90 offset, M thread

35 GENERAL CATALOGUE 007/08 Paddles, flask Stainless steel. With screwthread fitting as indicated. Stirring, Shaking, Miing Overhead stirrers Description Blade 0 hole, M thread hole, M thread Visco Jet stirring system Stirring system that mies low to high viscosity media using jet-vortices. Principle: The worldwide patent-pending Visco Jet stirring system is based on the cone-jet principle. Turbulent flows are created at the tapered end of the cone nozzle by acceleration, displacement and deceleration, resulting in vortices. These flows influence each other and create a novel, dynamic miing movement. Advantages: This system is ideal for all types of miing - no aeration - no foaming - no temperature rise - gentle miing for delicate samples - short miing times - minimum power consumption whilst miing at low speeds. Heidolph Type Material Dia. For neck Visco Jet - 0 Visco Jet - 80 Visco Jet - 80 Visco Jet - 0 Visco Jet - 0 VA VA POM VA POM Wavelength Rotation speed nm rpm 0 80 to to to to to to to to to to Paddles, adjustable, for narrow mouth flasks Stainless steel. With screwthread fitting as indicated. Type Blade blade, M thread blade, M thread blade, M thread blade, M thread Paddles, flask, centrifugal Stainless steel. With screwthread fitting as indicated. Type Blade hole, M thread hole, M thread Rods for stirrer rotor shafts, M and M0 screwthread end Description Dia. Length Rod, screwthread M Rod, screwthread M Rod, screwthread M Rod, screwthread M Rod, screwthread M Rod, screwthread M Rod, screwthread M Rod, screwthread M Rod, screwthread M Rod, screwthread M0 Rod, screwthread M0 Rod, screwthread M0 Rod, screwthread M0 Rod, screwthread M0 Rod, screwthread M0 Rod, screwthread M0 Rod, screwthread M0 Rod, screwthread M0 Rod, screwthread M

36 Stirring, Shaking, Miing Shakers and miers GENERAL CATALOGUE 007/08 Test tube shaker, lab dancer A new, attractively designed, test tube shaker. Designed for miing small test samples by touch function. - Small, compact and reliable - For small containers up to 0 in diameter, e.g. test tubes, centrifuge tubes, Eppendorf tubes - Fied speed (800 rpm) - Ecellent miing - Top of housing and the test tube accessories are made from chemical inert plastic. The bottom section is a coated, zinc die-casting. - Includes light V adapter Miing: orbital Orbit:. Miing Volume: tube, ma. 0 ml Motor rating input/output:. W/0.8 W Speed: 800 rpm (fied) Dimensions (Dia. H): g Material housing: PP Attachment: TPU Base: Zinc, coated Enclosure according to DIN EN 09: IP 0 Supply requirement: 00-0 V Frequency: 0/0 Hz lab dancer Minishaker MS basic/digital Compact, universal small shaker suitable for shaking tasks with all small vessels and microtitre plates: - Continuous or touch operation (with standard attachment) - Two operating modes available: Mode A (safe mode with attachment detection)the maimum speed of 000 rpm is only attained with the standard attachment in touch mode. When using other attachments the speed is limited to 00 rpm. Mode B (without attachment detection)a speed of 000 rpm is possible with all attachments. - Stable in all speed ranges - Sturdy, zinc, die-cast casing MS digital additionally with timer with countdown function. Type of movement: orbital Orbit:. Motor rating output: 8 W 0 to 000 rpm Dimensions (W D H): kg MS basic with mode A MS digital with mode B Accessories for Minishaker MS Description Standard attachment (Fig. ) Universal attachment (Fig. ) Microtitre plate attachment (Fig. ) One-hand insert Test tube insert, with holes Test tube insert, with holes Test tube insert, with holes Test tube insert, for any number of holes

37 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Shakers and miers Shaker Vorte Genius Vorte shaker suitable for intermittent operation (touch function), activated by pressing shaker attachment, or for continuous operation. - Wide speed range, infinitely adjustable - Versatile, due to accessory interchangeable attachments and 7 inserts (e.g. Eppendorf tubes, microtitre plates, 0 ml Erlenmeyer flasks etc.), please order separately - Attachments securely click onto shaker in any position - Strap clamp (VG.) ensures easy handling of round/erlenmeyer flasks - Sturdy, die cast zinc casing - Stable at high speeds due to special feet (silicone base with ultra high vibration damping) - Eccentric drive with ball bearings - Self-ventilated motor allows continuous operation with minimal warm-up of the housing Type of movement: orbital Orbital diameter: Motor rating input/output: 0 W/0 W 00 to 00 rpm Speed indication: scale 0 to Dimensions (W H D): 7 9. kg Protection class acc. to DIN EN 09: IP Vorte Genius Accessories for shaker Vorte Genius Description Standard attachment (Fig. ) One-hand attachment (Fig. ) Standard tray 0, rubber inlet Insert for Eppendorf tubes Insert for 8 0 test tubes (Fig. ) Insert for test tubes Insert for 8 test tubes Insert for 8 0 test tubes Attachment for Erlenmeyer and round vessels 00 to 0 ml (Fig. ) Holder for standard microtitre plate Vorte miers Rea top/rea control For ecellent miing - Circular vibrating action, with orbit - Contact pressure requirement reduced by appro. 0% - For intermittent or continuous operation - Adjustable speed range: 0 to 00 rpm - Heavy duty die cast housing with rubber feet for stability - With dial speed setting and supplied with top adapter for test tubes up to 0 - A larger top attachment can be supplied for test tubes up to 0 ml (see accessories) Rea top - with analogue speed control Rea control - with digital electronic speed control Heidolph Rea top, incl. attachment Rea control, incl. attachment Attachment, large, for tubes or flasks up to 0 ml Vorte mier PV- With low profile and small footprint. - variable speed: 0 to 000 rpm - low voltage supply for safe, cold-room use - operating ambient C to C Grant 7 PV

38 Stirring, Shaking, Miing Shakers and miers GENERAL CATALOGUE 007/08 Miers, vorte, SA7, SA8 - low profile, ergonomic design - Robust, die-cast housing avoids unnecessary movement during use - Powerful vorte miing action, ideal for a range of tubes - Two models available - Economic fied speed model - Variable speed model with choice between intermittent or continuous operation - Integral retort rod fiing - Range of accessory heads available With BioCote, silver-based, antimicrobial protection. Stuart Specifications SA 7 SA 8 Speed: 00 rpm 0 to 00 rpm Orbit:.. Continuous mode: No Yes Accessory heads: No Yes Maimum load: kg kg Overall dimension: Net weight:. kg. kg Electrical supply: 90-0 V, 0 W 90-0 V, 0 W SA7 SA8 Accessory head for micro plates and micro tubes Support rod 00. Vorte mier, Multi-Pulse Vorteer For efficient vorteing of large samples - Pulse-action function prevents sample stratification - Fits all coercial sample vessels Powerful miing of large volumes The multi-pulse vorteer is also suitable for miing of multiple samples. Each of the two attachments supplied will hold up to test tubes. The powerful d.c. motor (00 rpm. ma.) ensures thorough miing of even the toughest samples. The speed range is continuously adjustable. Pulse-action function Sample sedimentation build-up is not a problem for the Multi-Pulse Vorteer. The pulse function interrupts the vorte action for short intervals to ensure complete miing and is steplessly time-adjustable. Complete homogenization By adding glass or steel balls to the sample material the Multi-Pulse Vorteer is able to homogenize samples. The pulse function guarantees constant, complete homogenization throughout the entire sample. Versatility Multi-Pulse Vorteer can work with all coercial sample vessels. The Multi-Pulse Vorteer adapts to all sample volumes, without the need to buy additional attachments. Suitable for microtitration plates, cryogenic tubes, test tubes, Falcon tubes, Erlenmeyer flasks and many other vessels all with the same rack attachment, it only requires a different accessory attachment. With stepless attachment height adjustment. For eample with optional empty attachments it is possible to use test tube racks. Schütt Dimensions (W H D): Shaking speed: to 00 rpm Description Multi-Pulse Vorteer, 0V, incl. attachment for to and to Ø tubes Vorte mier, Multi-Pulse Vorteer, accessory attachments Schütt Vessel Ø to to 8 to 0 8 to 9 Capacity

39 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Shakers and miers Vorte mier, Multi-Pulse Vorteer, accessory attachments Schütt Container type Capacity 9-well microtitration plate ml erlenmeyer flasks 0 ml erlenmeyer flasks. /.0 ml test tubes cryogenic tubes Empty attachment for holding other vessels or racks plates flasks flasks 8 tubes tubes Test tube shaker, Multi Rea The only test tube shaker for up to tubes of differing diameters. - circular vibrating motion (orbit ) - continuously adjustable shaking frequency (0 to 000 rpm) - digital speed indicator - digital timer (to 999 min), with audible alarm (duration: s) - supplied with tube carousels - carousel for up to test tubes (0 to, maimum length 0 ) - carousel for up to test tubes ( to, maimum length 0 ) - long service life, year guarantee Heidolph Description Multi Rea Carousel for test tubes (0 to ) Carousel for test tubes ( to ) Vibrating shaker, Vibra VXR Opto-electronically controlled, mini shaker with very wide speed range from 0 to 00 rpm. Circular shaking motion with orbit. Slow speeds can be safely maintained. Suitable for continuous operation. Maimum load weight depends on attachment used, from 00 to 000 g. Please order the required shaker attachment separately. Shaking motion: Orbital Orbit: Motor rating input/output: 8/. W 0 to 00 rpm Dimensions (W D H): Weight (without attachment):.7 kg Ma. loading: kg Protection class DIN EN 09 IP Ika-Vibra VXR Vibrating shaker, Vibra VXR basic, accessory attachments Type Description Width Depth Height VX one-hand attachment VX test tube attachment VX 7 bowl attachment VX 8 Universal attachment VX E "Eppendorf" attachment For shaking individual loose containers of to 0 ml For up to test tubes or centrifuge tubes of Material: Makrolon For gentle miing of petri dishes, culture bottles etc. For rapid and safe miing of up to 00 ml Erlenmeyer flasks For intensive miing of up to Eppendorf tubes

40 Stirring, Shaking, Miing Shakers and miers GENERAL CATALOGUE 007/08 Orbital shaker, KS 0 basic Small, quiet running, low-friction shaker with effective orbital movement and a maimum loading of kg. - Electronic speed control and timer adjustment - LED scale bar speed and time display - Large selection of attachments for different container types and sizes - Attachments not included, please order separately. Shaking movement: orbital Orbit: Ma. capacity including attachment kg Motor rating input/output: W/0 W 80 to 800 rpm Speed indication: LED scale bar Timer: to 0 min/continuous Dimensions (W D H): kg Housing IP rating to DIN EN 09: IP KS 0 basic Orbital shaker, KS 0 control Small, quiet running, low-friction shaker with effective orbital movement and a maimum loading of kg. - electronic speed control and timer adjustment - digital display for speed, timer function, and operating modes - electronic timer: 0 to 9 h 9 min or continuous mode ( ) - integral stop positioning function (automated sample removal by robot possible) - all functions can be controlled and documented using labworldsoft software - special variant with rotation reversal available on request - large selection of attachments for various vessel shapes and sizes - attachments are not included, please order appropriate attachment separately Shaking motion: orbital orbit: Ma. capacity including attachment: kg (incl. attachment) Motor rating in/output W/0 W 80 to 800 rpm Speed display: digital Timer: 0 to 9 h 9/continuous min dimensions (W D H): weight: 8.8 kg Housing IP rating to DIN EN 09: IP Interface: RS/analogue KS 0 control 9.88 Accessories for orbital shaker KS 0 Universal attachment Able to hold most types of container using adjustable tension rollers. Fiing clip platform For shaking round bottom vessels, volumetric and Erlenmeyer flasks. Supplied without clips. Petri dish attachment For gentle miing and suspension of cell cultures or growth media in petri dishes, culture bottles and containers. With integral anti-slide mat (PP). Test tube holder For intensive vibrating of small tubes, test tubes, cuvettes, centrifuge tubes. Type Figure Separating funnel attachment Fiing clip platform Petri dish attachment Test tube holders

41 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Shakers and miers Orbital shaker, KS 0 basic Compact, low-level, platform shaker with highly effective, orbital motion, maimum capacity 7. kg. - Electronic speed control and timer adjustment - LED indicator display - Large selection of attachments for different container types and sizes - Attachments not included, please order separately. Shaking motion: Orbital Orbit: 0 Ma. loading incl. attachment 7. kg (incl. attachment) Motor rating input/output: /0 W 0 to 00 rpm Speed indication: LED scale Timer: to 0 min/continuous Dimensions (W D H): kg Housing IP rating to DIN EN 09: IP KS 0 basic Orbital shaker, KS 0 control Compact, low-level, platform shaker with highly effective, orbital motion, maimum capacity 7. kg. - Electronic speed control and timer adjustment - Separate digital speed and timer displays with operating mode indication - Timer: 0 to 9 h 9 min or continuous operation - Controlled stop-point positioning function (enables use in automated robotic sampling routines) - All functions can be controlled and documented using labworldsoft software - Special variant with reverse rotation function available on request - Large selection of attachments enable use with a wide variety of vessel shapes and sizes - Attachments are not included, please order separately Shaking motion: orbital Orbit: 0 Ma. loading incl. attachment: 7. kg 0 to 00 rpm Speed indication: digital Time switch clock: /9 to 9 min Dimensions (W D H): kg Housing IP rating to DIN EN 09: IP Interface: RS /analogue KS 0 control Reciprocating shaker, HS 0 basic Compact, low-level, platform shaker with highly effective, reciprocating motion, maimum capacity 7. kg. - Electronic speed control and timer adjustment - LED scale bar indicator display - Large selection of attachments for different container types and sizes - Attachments are not included, please order separately. Shaking motion: reciprocating Stroke: 0 Ma. loading incl. attachment: 7. kg 0 to 00 rpm Speed indication: LED scale bar Timer: to 0 min/continuous Dimensions (W D H): kg Housing IP rating to DIN EN 09: IP HS 0 basic

42 Stirring, Shaking, Miing Shakers and miers GENERAL CATALOGUE 007/08 Horizontal shaker, HS 0 control Compact, low-level, platform shaker with highly effective, reciprocating motion, maimum capacity 7. kg. - Electronic speed control and timer adjustment - Separate digital speed and timer displays with operating mode indication - Timer: 0 to 9 h 9 min or continuous operation - Controlled stop-point positioning function (enables use in automated robotic sampling routines) - All functions can be controlled and documented using labworldsoft software - Special variant with reverse rotation function available on request - Large selection of attachments enable use with a wide variety of vessel shapes and sizes - Attachments are not included, please order separately Shaking motion: reciprocating Stroke: 0 Ma. loading incl. attachment: 7. kg incl. attachment Motor rating input/output W/0 W 0 to 00 rpm Speed indication: digital Time switch clock: 9 h 9 min/continuous Dimensions (W D H): kg Housing IP rating to DIN EN 09: IP RS /analogue HS 0 control Accessories for orbital shakers HS/KS 0 Universal attachment Able to hold most types of container using adjustable tension rollers. Surface: 0 0 Fiing clip platform For shaking round bottom vessels, volumetric and Erlenmeyer flasks. Supplied without clips. Petri dish attachment For gentle miing and suspension of cell cultures or growth media in petri dishes, culture bottles and containers. With integral anti-slide mat (PP). Separating funnel attachment For shaking, elution, etraction, gassing out, dissolving, enriching. The tension rollers supplied are height-adjustable to accoodate different separating funnel sizes. The separating funnels are secured by means of O-rings (five O-rings supplied). Description Dimensions (W D H) Universal attachment Gridded clip platform attachment Petri dish attachment Separating funnel attachment Shakers, KS/HS 0, accessories Clamps for orbital shakers Ika KS 0 basic/control, KS 0 basic/control and reciprocating shakers Ika HS 0 basic/control. For flasks ml /0 00 Ma. no. plates

43 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Shakers and miers Orbital shaker, KS 0 digital Orbital movement. Low-profile laboratory shaker with large platform and load capacity of kg, depending on the attachment. With continuously adjustable speed range: 0 to 00 rpm., 0 orbit, digital display and timer. Ideally suited for vessel sizes over 0 ml, e.g. round bottom flasks, erlenmeyer flasks, culture flasks, bottles etc. Developed for biological and microbiological growth tests and for production of stock solutions. Continuous operation is guaranteed even under etreme loads. Requires, but is not supplied with, accessory attachments for operation. Ma. operating time: 00% Timer: 0 to mins Dimensions (W D H): Weight (without attachment): kg Operating conditions: Supply requirements: + to +0 C at 80% R.H. ma. 0 V 0/0 Hz Protection class according to DIN 09: IP KS 0 digital Reciprocating shaker, HS 0 digital Reciprocating movement. Low-profile laboratory shaker with large platform and maimum load capacity of kg, depending on the attachment. With continuously adjustable speed range: 0 to 00 rpm, 0 stroke, digital display and timer. Ideally suited for flasks, measuring cylinders and particularly separating funnels. Developed for universal applications. Continuous operation is guaranteed even under etreme loads. Requires, but is not supplied with, accessory attachments for operation. Ma. operating time: 00% Timer: 0 to mins Dimensions (W D H): Weight (without attachment): kg Operating conditions: Supply requirements: + to +0 C/80% R.H. ma. 0 V 0/0 Hz Protection class according to DIN 09: IP HS 0 digital Shakers, KS/HS 0 digital, accessories For orbital shaker Ika KS 0 digital and reciprocating shaker Ika HS 0 digital. Universal attachment: For a variety of vessels (flasks, beakers etc.) with volumes of at least 0 ml, ideally greater than 0 ml. With tension rollers that can be mounted on levels. Usable area: 0 0. Dimensions (W D H) Separating funnel attachment type : For shaking separating funnels from 0 to 0 ml capacity. Comprises basic holder, tension rollers, clamping devices and clamping devices with rod. Suitable for 0 ml, 0 00 ml or 0 ml separating funnels. Separating funnel attachment typ : For shaking separating funnels of 00 to 000 ml. Comprises basic holder, tension rollers, clamping devices and clamping devices with rod. Suitable for 00 ml, 000 ml or 000 ml separating funnels. Type Figure Universal attachment Separating funnel attachment Separating funnel attachment

44 Stirring, Shaking, Miing Shakers and miers GENERAL CATALOGUE 007/08 Shakers, KS/HS 0 digital, accessories Gridded clip attachment. (Without spring clips). For shaking round bottom, flat-bottom, pear-shaped, volumetric and erlenmeyer flasks etc. Minimum volume ml. Dimensions (W D H) Dish attachment. For the gentle movement of petri dishes, but also suitable for gentle miing in vessels with large, flat bottoms (wide mouth erlenmeyers, beakers). Fitted with a non-slip, plastic mat. Dimensions (W D H) 0 0. and clamping devices with rod AS.7. Suitable for 00 ml, 000 ml or 000 ml separating funnels. Separating funnel attachment. For shaking 000 ml separating funnels. Comprising basic holder, clamping devices, support bars and 8 ground cone section holders. Gridded clip attachment Dish attachment Separating funnel attachment Shakers, Titrama 00/0/000 General features - Vorteing motion - shaking, miing and incubating in one system different actions possible: from single to three dimensional - Choice of ma. loadings: kg, kg and 0 kg - Suitable for use in incubators up to 0 C and 80% R.H. ma. - Thermally insulated drive unit gives minimal rise in platform temperature - Timer for accurate and reproducible process duration - Overheat cut-out resets automatically - Comprehensive range of accessories, including multi-storey assemblies Titrama - shaking speed 0 to 0 rpm. - Fully adjustable speed setting - Integral 0 to 0 mins. timer with audible alarm - Continuous operation motor with overheat cut-out - Specially designed, moulded rubber platform for secure mounting of microtitre plates Titrama 00 - Orbit. - For up to microtitre plates Titrama 0 - Orbit.0 - For up to microtitre plates Titrama Orbit. - For up to microtitre plates - can be used with modular incubator 000 Heidolph Type Orbit Rotation Ma. no. Width Depth Height speed plates rpm Titrama 00 Titrama 0 Titrama to 0 00 to 0 00 to

45 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Shakers and miers Platform shakers, Vibrama 00/Vibrama 0 - Vibration vorteing action with. to.0 orbit - Speed range 00 to 00 rpm - Adjustable speed control - Integral 0 to 0 mins timer with continuous operation setting - Supplied with non-slip rubber mat Vibrama 00 Accessories - see category B (page ) Vibrama 0 Accessories - see category C (page ) Heidolph Type Orbit Rotation speed Vibrama 00 Vibrama 0 Ma. loading Internal dimensions (W D H) rpm kg.0 0 to to Platform shakers, Duoma 00 - Reciprocating motion with a shaking frequency up to 0 cycles/min. - Shaking frequency is adjustable and electronically controlled - Choice of or 0 platform tilt angle setting - Integral 0 to 0 mins. timer with continuous operation setting - Duoma 00 is compatible with the modular incubator Accessories - see category D (page ) Heidolph (WDH): Type Angle Rotation speed rpm Duoma 00 to 0 Duoma 00 0 to 0 Ma. loading kg Platform shakers, Polyma 00/Polyma 00 - Oscillating -dimensional motion with a maimum frequency up to 0 cycles/min. - Two models are offered with or 0 kg ma. loadings - Choice of or 0 platform tilt angle setting - Adjustable, electronically controlled rolling frequency - Integral 0 to 0 mins. timer with continuous operation setting Polyma 00 - Adjustable dial speed setting - compatible with the modular incubator Accessories - see category D (page ) Polyma 00 - digital set-and-read speed display - Accessories - see category E (page ) Heidolph Type Angle Rotation speed Ma. loading Dimensions (W D H) rpm kg Polyma 00 to Polyma 00 0 to Polyma 00. to Polyma to

46 Stirring, Shaking, Miing Shakers and miers GENERAL CATALOGUE 007/08 Platform shakers, Rotama 0/Unima 00/00 Rotama 0-0 to 00 rpm - Orbital shaker with 0 orbit - Built-in timer, 0 to 0 mins. with audible alarm ( sec.) - Maimum loading: kg - Accessories - see category B (page ) Unima 00-0 to 00 rpm - Orbital shaker with 0 orbit - Digital timer up to 999 mins. with audible alarm ( sec.) - Can be used with modular Incubator Maimum loading: kg - Accessories - see category D (page ) Unima 00 - Speed range 0 to 00 rpm - Orbital shaker with 0 orbit - Inbuild timer 0 to 0 mins. with audible alarm ( sec.) - Maimum loading: 0 kg - Accessories - see category E (page ) Heidolph Type Orbit Rotation speed Ma. loading Dimensions (W D H) rpm kg Rotama to 00 0 Unima to Unima to Platform shakers, Proma 00/00 Proma 00 - Reciprocating motion - Shaking frequency 0 up to 0 strokes/min. - Maimum stroke: - with digital timer (0 to 999 mins) - can be used with modular incubator Maimum loading: kg - Accessories - see category D (page ) Proma 00 - Reciprocating motion - Shaking frequency 0 up to 00 strokes/min. - Maimum stroke: 0 - Integral 0 to 0 mins. timer with audible alarm ( sec.) - Maimum loading: 0 kg - Accessories - see category E (page ) Heidolph Type Orbit Rotation speed Ma. loading Dimensions (W D H) rpm kg Proma 00 0 to Proma to

47 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Shakers and miers Heidolph shakers and miers, accessories Heidolph Type Category Attachment with tension rollers Test tube attachment for up to 9 test tubes, 80 (Ø L) Test tube attachment for up to test tubes, 80 (Ø L) Attachment for up to ml erlenmeyer flasks Attachment for up to 0 ml erlenmeyer flasks Attachment for up to 9 00 ml erlenmeyer flasks Attachment for up to 0 ml erlenmeyer flasks Attachment for up to 00 ml erlenmeyer flasks Attachment for up to 000 ml erlenmeyer flasks Attachment with tension rollers Spare tension roller Attachment for up to conical separating funnels, 0 ml or 00 ml Universal perforated platform 000. Please order clamps separately Universal perforated platform 000. Please order clamps separately Size, ml erlenmeyer clamp with attachment clip for the perforated platform, ma. per platform Size, 0 ml erlenmeyer clamp with attachment clip for the perforated platform, ma. per platform Size, 00 ml erlenmeyer clamp with attachment clip for the perforated platform, ma. per platform Size, 0 ml erlenmeyer clamp with attachment clip for the perforated platform, ma. per platform Size, 00 ml erlenmeyer clamp with attachment clip for the perforated platform, ma. 9 per platform Size, 000 ml erlenmeyer clamp with attachment clip for the perforated platform, ma. per platform Size separatory funnel clamp with attachment clip for the perforated platform. (0 ml - ma., 00/ 000 ml - ma. per platform) Size separatory funnel clamp with attachment clip for the perforated platform. (000 ml - ma. per platform) Frame for tension roller only. Supplied without tension roller Tension roller and frame complete. Order at least Multi-storey attachment. Includes perforated platform and supporting rods B C C D D D D D D D D D E E E E E E E E E E E E E Modular incubator Unique modular incubation system comprising heating module and hood for simultaneous heating and cooling and, in conjunction with compatible Heidolph shakers, shaking and miing of samples - Choice of low or high incubation hoods - Gives rapid heating, with no fogging of the pleiglass hood - Compatible with Unima 00, Proma 00, Duoma 00, Polyma 00 and Titrama 000 models - Upward-opening hood enables vessels to be changed or refilled easily Heating module - Adjustable temperature from ambient + to + C - Digital display of set-point and actual temperatures - Heating module with fan-assisted air-circulation, heat rating 00 W - Temperature accuracy of ± K up to +0 C, ± K over +0 C Heidolph Type Width Depth Height Incubator 000, heating module Incubation hood, low, for dishes, tubes etc. Incubation hood, high, for beakers, flasks and funnels

48 Stirring, Shaking, Miing Shakers and miers GENERAL CATALOGUE 007/08 Shakers, 000 series With upper housing constructed in rigid polystyrene and electro-galvanized sheet steel base plate, both powder coated in grey white finish (RAL 900). Platforms are either anodized aluminium (Models 00 to 08 and 0) with four plastic posts, or electro-galvanized sheet steel (Models 09/00), powder coated in off-white (RAL 900) with four "chrome stainless steel" corner rods and collars to hold accessory attachments. Control panels are clear and logical for easy operation. Continuously adjustable, electronic speed control with soft start. Maintain constant, load independent, movement during continuous operation. Very low unit weight, highly portable, making movement around the lab easy. Models 00 to 08 are suitable for use in incubators and warming cabinets at temperatures between +0 and +0 C and ma. 70% R.H. (non-condensing). The devices are GS tested and maintenance-free. Almost all types of bottles, flasks and containers can easily be accoodated on the platforms using accessory attachments. Analogue controlled: Features of models 00/00/0/0/0/0/09/0: Mechanical timer, which can be switched between continuous or timed operation up to 0 minutes. Digital controlled: Features of models 0/0/07/08/00: Microprocessor controller, for continuous, or timed operation up to 99 hours and 9 minutes with RS interface for control via user's PC. With LCD time and speed readout. Orbital shaker Model 00 With orbital movement. Small footprint, versatile. Suitable for gentle movement of liquids, as well as powerful miing. Particularly suitable for the cultivation of micro-organisms, cell and tissue culture applications. Compact, low-friction mechanism with compensation weight for safe, steady and reliable, continuous operation. GFL GFL Specifications Overall (W D H): Shaking speed: 0 to 00 rpm Platform (W D): 0 0 Supply requirements: 0/0/0 Hz/0 W Ma. loading: 8 kg Net/gross weight: /7 kg Type of movement: Orbital Timer: to 0 min or continuous operation Orbit: Shaker, reciprocating, Model 00 Reciprocating movement. GFL For the intensive shaking of liquids - particularly in spherical separating funnels. Specifications Overall (W D H): Shaking speed: 0 to 00 rpm. Platform (W D): 0 0 Supply requirements: 0 V/0/0 Hz/0 W Ma. loading: 8 kg Net/gross weight: /7 kg Type of movement: Reciprocating Timer: to 0 min or continuous operation Stroke: dimensional shakers, Models 0/0 With -dimensional, tumbling motion. Used primarily for cell culture and in AIDS research. Stable, low-friction, gentle movement. GFL Specifications Overall (W D H): 0 8 Platform (W D): 0 0 Ma. loading: kg Type of movement: Three-dimensional, gyratory Platform angle: Shaking speed: to 0 rpm. Supply requirements 0: 0 V, 0/0 Hz, 90 W 0: 0 V, 0 or 0 Hz, 90 W* Net/gross weight: 0/ kg Timer 0/0: to 0 min or continuous operation/ min to 99:9 hours or continuous operation Model 0: microprocessor controlled; RS interface 0 0** * Please specify when placing your order! **With digital speed display

49 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Shakers and miers Shakers, Rocking, Models 0/0 Rocking movement. Stable, low-friction mechanics. With slow, rocking action about a central pivot. Provide reproducible growth and preparation conditions for cell cultures and other media and ensure optimum and even rinsing and circulation of samples. GFL Specifications Overall (W D H): 0 8 Platform (W D): 0 0 Ma. loading: kg Platform angle: Shaking speed: to 0 rpm Supply requirements 0: 0 V 0/0 Hz, 90 W 0: 0 V 0 or 0 Hz, 90 W* Net/gross weight: 8/ kg Timer: to 0 min or continuous operation/ min to 99:9 hours or continuous operation Model 0: microprocessor controlled, RS interface 0 0** * Please specify when placing your order! **With digital speed display Shakers, orbital, Models 0/07 Orbital movement. Suitable for universal applications, both for the gentle circulation of liquids and for powerful miing. Particular areas of use include micro-organism reproduction, cell and tissue culture. Compact, low-friction mechanics with counterbalanced platform drive for secure and reliable, continuous operation. GFL Specifications Overall (W D H): Platform (W D): Ma. loading: Type of movement: Orbit: Shaking speed: kg Orbital 0 0 to 00 rpm Supply requirements 0: 0 V 0/0 Hz, W 07: 0 V 0 or 0 Hz, W* Net/gross weight: 9/ kg Timer: up to 0 min. or continous operation/ min up to 99:9 hours or continous operation Model 07: microprocessor controlled, RS interface 0 07** * Please specify when placing your order! **With digital speed display

50 Stirring, Shaking, Miing Shakers and miers GENERAL CATALOGUE 007/08 Shakers, reciprocating, Models 0/08 Reciprocating movement. Robust shakers for the powerful, intensive shaking of bottles, measuring cylinders, separating funnels, etc. held in a horizontal position. The jerky, to-and-fro platform movement provides a high level of turbulence and ensures that media is well mied. With stable, low-friction mechanics. Specifications Overall (W D H): 0 Platform (W D): 0 0 Ma. loading: kg Type of movement: Reciprocating Stroke: 0 Shaking speed: 0 to 00 rpm Supply requirements 0: 0 V 0/0 Hz, W 08: 0 V 0 or 0 Hz, W* Net/gross weight: 9/ kg Timer: Up to 0 min. or contiunous operation/ min. up to 99:9 h or continous operation Model 08: is microprocessor controlled 0 08** * Please specify when placing your order! **With digital speed display! Shakers, orbital, Models 09/ Orbital movement. With large platforms for high shaking loads. For universal laboratory applications. A large, orbit and continuously adjustable speed range make these shakers suitable for both the gentle circulation of liquids and for powerful miing. Particular application areas include breeding of micro-organisms, cell and tissue culture. Compact, low-friction mechanics with counterbalanced platform drive for secure and reliable, continuous operation. Specifications Overall (W D H): 7 70 Platform (W D): 7 0 Ma. loading: 0 kg Type of movement: Orbital Orbit: Shaking speed: 0 to 0 rpm Supply requirements 09: 0 V 0/0 Hz, 90 W 00: 0 V 0 or 0 Hz, 90 W* Net/gross weight:./0 kg Timer: Up to 0 min. or contiunous operation/ min. up to 99:9 h or continous operation Model 00: microprocessor controlled, with a built-in RS interface GFL GFL 09 00** * Please specify when placing your order! **With digital speed display. Overview accessories for shakers and shaking incubators Type Cat.-No Accessories Non-slip support 9 Non-slip support 9 Universal attachment 9 Universal attachment 97 Universal attachment 98 Multi-storey attachment 98 Test tube rack 9 Multi-storey attachment 98 Tray 90 Tray 9 Tray 970 Tray GFL 979

51 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Shakers and miers Non-slip support Non-slip support Type 9 can also be used in shaking incubator type 0. For slow speed applications, e.g. circulating petri dish media, etc. GFL Type For Type Width Length / 00 0 to 08 / GFL shaking incubators - please see page 99 Trays Type 90 for Models 00/00 "Chrome stainless steel". With grid for attaching clips to hold separating funnels, erlenmeyer flasks and test tube racks. Type 9 for models 0 to 08 "Chrome stainless steel". With grid for attaching clips to hold erlenmeyer flasks and test tube racks (Models 0 to 08 only). Type 980 for Models 09/00 thick, anodized aluminium. With 99 holes for attaching clips to hold erlenmeyer flasks and test tube racks. Type For GFL / 00 0 to 08 / 0 09 / 00 / Erlenmeyer flask clips Erlenmeyer flask clips for models 00 to 00 shakers. "Chrome stainless steel". GFL Type For flasks Clips required shaker Model Clips required shaker Model Clips required shaker Model ml 00, 00 0 to 08 09, to Grid attachment clips for spherical separating funnels "Chrome stainless steel". For spherical separating funnels (in accordance with ISO). For screw mounting onto trays Type 90/9 attachments GFL Type Capacity Ma. clips per tray ml / / / 8 / Holding frame for Microtitre- and DeepWell-Plates Made of stainless steel, for attachment of a test plate, for screwing on to shaking trays 90/9/980. Complete with attachment materials. Technical Specification: For trays: number of plates: GFL

52 Stirring, Shaking, Miing Shakers and miers GENERAL CATALOGUE 007/08 Universal attachments Universal attachments for shakers. Type 9 - for models 00/00 and shaking incubator 0 For securely attaching a variety of vessels between the rubber-coated crossbars. Type 97 - for Models 0-08 For securely attaching a variety of vessels between the rubber-coated crossbars. Type 98 - for models 09/00 (see fig.) For securely attaching a variety of vessels. Comprises longitudinal bars and transverse bars. The longitudinal bars can be adjusted vertically and the transverse bars horizontally using clamp screws. GFL Type For / / 0 09 / Multi-storey attachment Type 98. For shakers Models 0-0. With platform levels, of which have bevelled front edges and can be removed. Constructed in "chrome stainless steel" and each platform level is fitted with a ridged, non-slip rubber mat. GFL Type For Test tube racks Type 9. For shakers models 00/00, 0 to 00 and shaking incubator 0. "Chrome stainless steel". Rack apertures can be angled up to 90. A built-in, spring clip maintains a secure hold on the tubes to 7 diameter and enables noise-free shaking. For trays: Number of racks: Type For GFL 9 00 / 00 and 0 to 00 / GFL shaking incubators - please see page 99 Multi-storey attachment Type 98. For shakers models 09/00. For doubling shaker capacity by enabling two type 980 gridded attachments to be fitted to the platform. GFL Type For /

53 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Shakers and miers Shakers, large platform, SSL & SSL - Available with orbital or reciprocating action - Digital speed selection to 00 rpm with soft start - Built-in digital timer - Reliable, quiet running mechanism - Fully adjustable cradle system These lab scale platform shakers have powerful yet quiet shaking mechanisms and have been designed for trouble-free, continuous use. The cradle type platforms have si rubber cushioned horizontal securing bars which can be easily adjusted both vertically and horizontally to hold most sizes and types of vessel, including flasks, bottles and beakers. For eample, they will accoodate the following Erlenmeyer flasks or bottles: 0 ml or 8 00 ml or 000 ml or 000 ml. Speed is fully variable and is set digitally. The speed is accurately maintained, even over long runs. A built-in digital timer allows shaking times from to 999 minutes to be set. Alternatively the unit can be set for continuous operation. With BioCote silver based antimicrobial protection. Stuart Specifications SSL SSL Platform dimensions (W D): 0 to 00 rpm to 0 rpm Orbit/stroke: 0 Maimum loading: 0 kg 0 kg Overall dimensions (W D H): Net weight: kg kg Supply requirements: 0 V 0 Hz, 0W 0 V 0 Hz, 0W Type Description SSL SSL SSL/ * For use with SSL only! Shaker, orbital, large platform Shaker, reciprocating, large platform Accessory platform 0 0 with twelve rubber securing bars* Rocking shakers, large platform, SSL and SSL - Large platform rockers - ideal for multiple users - Gentle rocking action - Choice of two models - D gyratory action SSL - See-saw, wave action SSL - Digital speed control and built-in timer - Optional tier system available to increase capacity These rockers have large platforms able to accoodate a number of samples, ideal for a busy lab. They are very quiet in operation and designed to be run continuously. There are two models available: Model SSL provides a D gyratory motion, ideal for low foaming agitation, DNA etractions, staining and de-staining procedures etc. The tilt angle can be adjusted to any position by hand to optimise miing of vessels. Model SSL has a see-saw rocking action that creates a wave motion within vessels such as culture flasks, ipetri dishes etc. Both models are supplied with a non-slip mat and have digital selection of both speed and time. An accessory tier system is available. Fitted in seconds, without the need for tools, it triples the available space for samples. With BioCote, silver-based, antimicrobial protection. Stuart Specifications SSL SSL Rocking action: D gyratory See-saw wave Platform dimensions (W D): to 70 rpm to 70 rpm Angle of tilt: to 7 Angle adjustable: Yes by hand No Maimum load: 0 kg 0 kg Overall dimensions (W D H): Net weight: 0 kg 0 kg Supply requirements: 0 V 0 Hz, 0W 0 V 0 Hz, 0W Type Description SSL SSL Rocker, gyratory, lab scale Rocker, see-saw, lab scale

54 Stirring, Shaking, Miing Shakers and miers GENERAL CATALOGUE 007/08 Shaker, orbital, mini, SSM - Smooth orbital shaking action - Built-in digital timer - Variable speed control to 00 rpm - Supplied with non-slip mat for microplates etc. - Optional accessory cradle system for flasks and bottles The compact SSM provides a smooth uniform circular motion with an orbit of. It is supplied with a non-slip mat that can hold up to four microplates or diagnostic cards. Alternatively, an accessory cradle system is available that can accoodate a variety of vessels including flasks, bottles or beakers via four rubber securing bars. It will hold up to: 0 ml or 00 ml or 000 ml Erlenmeyer Flasks or bottles. Speed is variable from 0 to 00 rpm. Once set on the digital display, the shaking speed is effectively maintained even over long periods of time. Shaking times can be set to run for to 999 minutes on the built-in digital timer, or the unit can also be set for continuous operation. With BioCote, silver-based, antimicrobial protection. Stuart Specifications Platform dimensions (W D): Orbit diameter: Maimum load: Overall dimensions (W D H): Net weight: Supply requirement: to 00 rpm kg kg 0 V 0 Hz, 0 W Type Description SSM SSM/ Shaker, orbital, mini Accessory cradle with securing bars Rocking Shakers, mini, SSM and SSM - Small space saving design, ideal for personal use - Gentle rocking action - Digital speed control and built-in timer - Optional tier system available to increase capacity These compact rockers are ideal where gentle miing is required. There is a choice of two models: Model SSM provides a D gyratory motion, ideal for low foaming agitation, DNA etractions, staining and de-staining procedures etc. The tilt angle can be adjusted to any position by hand to optimise miing of vessels. Model SSM has a see-saw rocking action that creates a wave motion within vessels such as culture flasks, Petri dishes etc. Both models are supplied with a non-slip mat and have digital selection of both speed and time. An accessory tier sytem is available. Fitted in seconds, without the need for tools, it triples the available space for samples. With BioCote, silver-based, antimicrobial protection. Stuart Specifications SSM SSM Rocking action: D gyratory See-saw wave Platform dimensions (W D): to 70 rpm to 70 rpm Angle of tilt: to 7 Angle adjustable: Yes by hand No Maimum load: kg kg Overall dimensions (W D H): Net weight: kg kg Electrically supply: 0 V 0 Hz, 0 W 0 V 0 Hz, 0 W Type Description SSM SSM Rocker, gyratory, mini Rocker, see-saw, mini

55 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Shakers and miers Shaker, microtitre plate, mini, SSM - Vibrational miing action - ideal for microtitre plates - Digital selection of miing speed - Built-in digital timer or continuous operation - Optional tube holders available for miing microcentrifuge tubes Designed for use with microtitre plates and microcentrifuge tubes. The aluminium tray is fitted with a specially designed mat that securely holds in place up to four wellplates. High speed combined with a tiny orbit creates the vibrational shaking action required for miing the very small volumes contained in the wells or in microcentrifuge tubes. Speed is variable from 0 to 00 rpm and is easily set via the digital display. Shaking times can be set from to 999 minutes on the built in digital timer. The unit can also be set for continuous operation. Tube holders are available as optional accessories. They fit securely onto the platform turning the unit into an effective tube mier. With BioCote, silver-based, antimicrobial protection. Stuart Specifications Platform dimensions (W D): 0 0 Number of plate positions: 0 to 00 rpm Orbit diameter: Maimum load: kg Overall dimensions (W D H): Net weight: kg Supply requirements: 0 V 0 Hz, 0 W Description SSM, shaker, microtitre, mini SSM/, tube holder for. ml tubes SSM/, tube holder for 0. ml tubes Microtitre shaker MTS / digital Dedicated shaker for two or four microtitre plates. Orbital movement. - Electronic speed regulation - Digital timer - Acoustic signal at end of timed period - With attachment but without plates Motor performance Input/Output: /. W Orbit: Capacity: two or four microtitre plates 0 to 00 rpm Analogue scale Timer: to 99 min/continuous Dimensions (W D H): kg Housing IP rating to DIN EN 09: IP MTS / digital Microplate shaker PMS-000 Reliable, regulated shaking for two or four microplates. Simple screw attachments allow quick and easy fitting of any standard depth 9- or 8-well plates, holding the plate securely in place. - variable speed: 0 to 000 rpm - orbit: - continuous or timed operation - integral timer: min to hours - standard option for two microplates - optional platform for four microplates - low voltage supply for cold room operation - operating ambient + C to + C Grant Type PMS-000 MPP- Microplate shaker Platform for micro plates

56 Stirring, Shaking, Miing Shakers and miers GENERAL CATALOGUE 007/08 Vibration shaker 0 For microtitration plates. High speed (up to 0 rpm.) with a small orbit ( ) guarantees optimal miing of materials even in small vessels. Counterbalanced for secure, steady operation even when used continuously. Supplied with fitted platform for up to si microplates. Areas of application: medical diagnostics, biotechnology or microbiology. GFL Specifications Overall (W D H): 80 0 Platform (W D H): 0 0 Shaking speed, stepless adjustment: up to 0 rpm Orbit: Ma. loading:. kg Supply requirements: 0 V/0/0 Hz/ W Net/gross weight: 9/ kg Timer up to 0 min. or continous operation D platform rotator PS-D Smooth D orbital motion for miing in tubes, culture flasks, dishes and boes. - ideal size for personal use - variable speed: to 0 rpm - fied position: 7 tilt angle platform - low voltage supply for cold room operation - operating ambient + C to + C Grant Type Description PS-D D platform mier Accessories for D platform rotator PS-D Grant Type Description Figure PDM PTP- Dimpled mat, prevents tubes from rolling around Adaptor for tubes up to Multi-function D rotator PS-MD With consistent and reproducible agitation throughout the speed range, multi segment program. - multi function: rotation, reciprocation, vibration - reciprocal D rotation: to 0 - vibration: to - variable speed: to 0 rpm - fied position: 7 tilt angle - platform - low voltage supply for cold room operation - operating ambient + C to + C Grant Type Description PS-D D platform mier Accessories for Multi-function D rotator PS-MD Grant Type Description Figure PTP- PDM Adaptor for tubes up to Dimpled mat, prevents tubes from rolling around

57 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Shakers and miers Orbital shaking platform POS-00 Smooth horizontal orbital motion for miing in bottles, flasks and beakers. - variable speed: 0 to 00 rpm - orbit: 0 - integral timer: min to 00 hrs - interchangeable platforms - for loads up to. kg - soft start and noise free operation - operating ambient + C to + C - low voltage supply for cold room operation Grant Type Description POS-00 Orbital shaking platform without accessories Accessories for Orbital shaking platform POS-00 Grant Type Description PUP- PP- P-00 P-0 Universal platform Flat platform Platform with clamps for 00 ml flasks / 0 ml beakers Platform with clamps for 0 ml flasks / 00 ml beakers Platform rocker PMR-0 Smooth rocking motion for gentle sample agitation in tubes, culture flasks, dishes and boes. - side to side rocking motion - variable speed: 7 to 0 rpm - fied position: 7 tilt angle - continuous or timed operation - integral timer: min to hours - platform - low voltage supply for safe cold room operation - operating ambient + C to + C Type Description PMR-0 Platform rocker Grant Accessories for platform rocker PMR-0 Grant Type Description PDM dimpled mat, prevents tubes from rolling around Fied speed rotator FSR0 Speed approimately 0 rpm, tilt angle. Ambient operating temperature range + C to + C. With aluminium platform, fitted with removable dimpled rubber mat to hold test tubes of various diameters up to a load capacity of kg. Overall (W D H) 0 0. Powered by a V a.c. adapter with slim cable allowing use in an incubator, and requiring a 0V 0/0Hz single phase supply. Grant Type Description FSR0 fied speed rotator Variable speed rotator VSR Similar to FSR0 but with analogue speed adjustment over range to rpm and adjustable tilt angle from 0 to without the need for using tools. Supplied with dimpled rubber mat for test tubes and smooth non-slip mat for flasks, boes, plates or dishes up to a load capacity of kg. Overall (W D H) 0 0. Powered by a V a.c. adapter with slim cable allowing use in an incubator, and requiring a 0V 0/0Hz single phase supply. Type Description Grant VSR adjustable speed rotator 9.9 0

58 Stirring, Shaking, Miing Shakers and miers GENERAL CATALOGUE 007/08 Rotators FSR0/VSR, accessory Accessory aluminium platform OP. Size: With dimpled and non-slip mats. Grant Type Description OP platform, Variable speed rocker BFR With analogue speed adjustment between and rpm, and adjustable tilt angle from 0 to 0 without the need for using tools. Ambient operating temperature range + C to + C. With aluminium platform fitted with removable smooth non-slip mat to hold flasks, boes, plates or dishes up to a load capacity of.7 kg. Overall (W D H) Powered by a V a.c. adapter with slim cable allowing use in an incubator, and requiring a 0V 0/0Hz single phase supply. Grant Type Description BFR variable speed rocker 9.9 Variable speed rocker BFR, accessories Grant Type Description ST-BFR single stacking tray which attaches to the rocker platform, doubling the working area. Platform Tumble shaker Model 00 Stable stirring unit for "end-over-end" miing of sedimentation bottles, measuring cylinders and other containers. Particularly suitable for suspending soil samples in liquids within glass/plastic 000 ml wide-neck bottles for DIN 8 - Section (elution) testing. Double ball-race ale bearings. With compartments each with holders for carrying bottles in total of the same size or containers (not included) up to 0 diameter and 70 height. A lockable brake switch is built into the control panel. Holders and ales are made of grade.0 stainless steel. Electronically controlled, d.c. gear motor. Housing made of electro-galvanized sheet steel, powder-coated grey-white (RAL-900), bottle supports and control panel are claret red (RAL 00). LED speed display. Stands on non-slip rubber feet. Device carries the "GS safety tested" mark. Delivered with mains cable and earthed plug. GFL Specifications Speed control: Speed display: Capacity: Bottle height range: Ma. bottle : Drive: Dimensions (W D H): Supply requirements: Ma. load: Net/gross weight: to 0 rpm Electronic, stepless Digital bottles to 70 height 0 d.c. geared motor V 0/0 Hz, 00 W 0 kg appro. / 78 kg

59 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Shakers and miers Multi-function-rotators PTR-0 and PTR-0 Vertical multi-function rotators for thorough miing in tubes, with multi-segment prograe. - multi-function: vertical rotation, reciprocation, vibration - continuous or timed operation for each phase - adjustable angle, reciprocal mode: to 90 - low voltage supply for safe cold room operation - operating ambient + C to + C - alternative platforms for larger tubes Grant Variable speed PTR-0: PTR-0: to 0 rpm to 0 rpm Type PTR-0 PTR-0 Multi-function-rotator for microtubes up to Multi-function-rotator for 8 microtubes up to Accessories for multi-function-rotators PTR-0 and PTR-0 Grant Type PPRS- PRS8- PRS- Platform for PTR-0 ( tubes up to Ø 0 plus tubes up to Ø ) Platform for PTR-0 (8 tubes up to Ø 0 plus tubes up to Ø ) Platform for PTR-0 ( tubes up to Ø 0 ) Test tube rotator, Model 0, tumbling action For gentle to intensive miing of powders or liquids held in test tubes. Applications include haematocrit and haemoglobin analysis, bone marrow eperiments, various separation processes, tissue analysis etc. A powerful geared motor drives the spindle-mounted rack, which can accoodate up to test tubes. The rack is removable and can also be loaded remotely from the rotator. The electronic feedback, constant speed control has stepless adjustment. Maintenance free. For ma. tubes: 0 /7 diameter, 00 /7 diameter, 00 diameter, or 7 diameter GFL Technical Specification: Eternal dimensions (W D H): Rotational speed: Supply requirements: Net/gross weight: to 80 rpm. 0V 0/0 Hz, 80 W 9./ kg

60 Stirring, Shaking, Miing Shakers and miers GENERAL CATALOGUE 007/08 Flask shaker SF Creates a vigorous shaking action. With clamps to accept 8 flasks up to 00 ml capacity. With stepless variable speed control and 0 to 0 minute timer with off and continuous run settings. Electronic feedback control ensures a constant speed irrespective of the load. Overall (W D H) Weight 8. kg. For 0V 0Hz single phase supplies. Accessory side-arms are available for converting to shake up to flasks. Maimum load: litres. Each side arm accepts si clamps. Supplied with clamps. With BioCote, silver-based, antimicrobial protection. Stuart SF Spare clamp Accessory side arm Rotator drive unit STR For use with the STR/ drum, STR/ flask/bottle rotator Drum, STR/ figure 8 drum, STR/ bottle holder or STR/ eppendorf-type tube rack holder. Fitted with illuminated mains on/off switch. Has variable speed with electronic speed control, range to 0 rpm, fitted with 0 to 0 minute timer with off and manual over-ride position. Fitted with panel mounted fuse. For use on 0V 0 Hz single phase supplies. Overall dimensions (W D H) Net weight kg. Requires accessory drums for operation. With BioCote, silver-based, antimicrobial protection. Stuart STR Drum STR/ for rotator drive unit STR Square drum which accepts one plate of clips on each side. The plates plug into the drum which is fitted with a push button release/lock mechanism. Without accessory plates. Stuart STR/ Accessory plates for STR/ drum for STR To fit drum Fitted with clips to accept tubes vertically. Supplied in pairs. No. of tubes Dia. 9 Drum, flask, STR/ for rotator drive unit STR Drum with two platforms for STR. Accepts two 00 ml conical flasks or reagent bottles. The support columns can be detached to give two platforms cm each for separating funnels, jars or test tube racks. With BioCote, silver-based, antimicrobial protection. Stuart Stuart STR/ Drum, figure-of-8, STR/ for rotator drive unit STR The drum has a platform which can be adjusted within the drum from horizontal to. In this way the sample container can be rolled and turned end over end at the same time. Suitable for etractions, paint miing, powders and granular samples. The sample container is held by an adjustable velcro strap. With BioCote, silver-based, antimicrobial protection. Stuart STR/

61 GENERAL CATALOGUE 007/08 Stirring, Shaking, Miing Shakers and miers Bottle holder STR/ for rotator drive unit STR Perspe four segment cradle with velcro straps for STR. Holds to bottles each up to 000 ml capacity. With BioCote, silver-based, antimicrobial protection. Stuart STR/ Rack cradle STR/ for rotator drive unit STR Holds four acrylic racks for end over end miing of Eppendorf tubes by STR. The racks fit under the cradle plates and are held by clips ensuring that the tube lids are pressed firmly against the plate and thus remain sealed. Supplied with four racks, each with a capacity of 0 Eppendorf tubes. With BioCote, silver-based, antimicrobial protection. Stuart Rack cradle STR/ Spare rack for STR/. Roller miers Recoended for miing blood samples, viscous substances and liquid-solid suspensions where minimum aeration is required. Units can be used in incubators up to 0 C and humidity up to 80%, or in cold rooms down to C. A magnetic block, stacking system is available separately to stack up to three units without tools, optimizing bench space. - Rocking and rolling action for complete miing - Choice of analogue fied speed or digital variable speed model - Digital models have integral timer function - Designed for continuous quiet operation Stuart Specifications Amplitude: Maimum load: Roller size (l d): Power supply: 0 kg V, 0 Hz, 0 W Description Dimensions (W D H) Rotation speed Weight rollers, analogue rollers, digital 9 rollers, analogue 9 rollers, digital rpm kg to to Stacking system for roller miers Stuart SRT/STACK Rotators SB/SB The Stuart rotators give gentle but effective miing ideal for life sciences applications such as keeping blood samples in suspension. The angle of tilt is fully adjustable. The Rotators can be used in incubators up to 0 C and in cold rooms down to C. There are si types of tube holder available. Please order separately. SB: Fied speed of 0 rpm. SB: Variable speed of to 0 rpm. Additional digital timer of to 999 minutes. Digital speed control. Stuart Specifications Dimensions (W D H): Supply: 0 V/0 Hz, 0 W. kg SB SB