Tetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer

Size: px
Start display at page:

Download "Tetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer"

Transcription

1 Tetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer Here shown with Tetra Pak Volumetric Bottom Filler Highlights Increased efficiency with servo controlled mould table index, extractor functions and positive lay-off to wrapping Gentle product handling and best hygiene with direct lay-off to multi lane wrapping Fast product / size change over Best ice cream texture and incorporation of inclusions with optional viscous bottom filling with Tetra Pak Volumetric Bottom Filler Application Automatic, continuous production of ice cream, sherbet, or fruit juice stick novelties. Operating principle The production of ice cream stick novelties is carried out in six main stages: 1. Filling of ice cream into the moulds. 2. Insertion of wooden sticks into the ice cream. 3. Freezing of the stick novelties in a cold brine bath at 40 C ( 40 F). 4. Defrosting of a thin outer layer of the stick novelties in a warm brine bath at C ( F). 5. Extraction of the frozen stick novelties from the moulds. 6. Lay-off for packing. Between extraction and lay-off, the stick novelties may be coated with chocolate. Products dipped in chocolate may also subsequently be coated with dry ingredients.

2 Tetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer Operating principle Capacity The capacity for typical products (see tables) will normally be in the range of to ice cream stick novelties per hour. Capacities for water ice are approximately 20 % lower than for ice cream. Actual capacity depends upon a number of factors, including: Number of radial rows. Number of products per radial row. Product thickness. Recipe (e.g. sugar content and total solids content). Overrun. Viscosity of ice cream mix. Brine temperature. Ice cream filling temperature. Number and types of filling operations. Capacity of the packing line. The number of freezing pockets per radial row depends upon the width of the ice cream stick novelty. For example: Example Max. width of product Pockets per radial row 71 mm (2.80 ) mm (2.34 ) 14 * 51.5 mm (2.03 ) 16 * 39.5 mm (1.56 ) mm (1.26 ) 24 26,5 mm ((1.05 ) 28 The number of radial rows depends on the thickness of the ice cream stick novelty. For example: Example Max. thickness of product Number of radial rows * Up to 21.5 mm (0.85 ) 135 * mm ( ) mm ( ) mm ( ) mm ( ) 99 There are 11 strokes between chocolate dip and lay-down. This gives a drying time of 22 sec. at maximum strokes per min. * Typical products. Example Product width 49 mm (1.93 ) Product thickness 19 mm (0.75 ) Number of radial rows 135 Number of pockets per row 16 Overrun of ice cream 60% Evaporating temperature Brine temperature Ice cream filling temperature Capacity, approx. 45 C ( 49 F) 40 C ( 40 F) 3 C (+27 F) per hour The capacity is based on a mix recipe using good quality ingredients as follows: Fat 10.0 % Skimmed milk powder, fat free 10.5 % Sugar (sucrose) 12.0 % Glucose syrup 5.0 % Auxiliary ingredients 0.5 % Total solids 38.0 % Water 62.0 % Total 100 % Standard design Mould table The moulds, in which the stick novelties are shaped and frozen, are welded into an annular, rotary table situated on top of the brine tank. The mould table is made of stainless steel. The number of pockets included in the standard mould table with 16 pockets per radial row is 16 x 126 = 2016 pockets. With 126 radial rows the max. thickness of the products is 24 mm. Other mould tables with different row and pocket configurations can be supplied (see Optional equipment). The mould table of a Tetra Pak Rotary Moulder 35 A2 can handle ice cream stick novelties up to 144mm (5.67 ) long. The stick inserted in the ice cream/water ice stick novelty must protrude at least 30 mm (1.18 ) above the mould table. Brine tank The double-walled annular tank is welded and insulated. It is made from stainless steel. The only exceptions are the inside bottom and the evaporator which are made from milled steel.

3 Two rails are placed on the outside of the brine tank for mounting the stick dispenser, the cleaning equipment, the filling equipment, etc. The brine tank is divided into a freezing zone with cold brine and a defrosting zone with warm brine. Cooling system The primary cooling system consists of a semi welded titanium plate heat exchanger. Ammonia/ NH 3 is used as refrigerant, optional CO 2 or R404A. The secondary cooling system is a cold brine bath, and the cold brine is circulated by a pump. The cold brine distribution trough is made of stainless steel with special nozzle plates to control the vertical brine distribution around the mould pockets. Low energy, frequency driven centrifugal brine pumps with flow capacity controlled from the recipe set-up in the PLC. Defrosting system The warm brine is heated either by steam or optional by electrical or hot water or similar. The choice must be made when ordering. The brine is sprayed vertical onto the underside of the moulds through a nozzle system. The defrosting system is equipped with a separate centrifugal pump. A thermostat prevents operation of the extractor if the warm brine temperature is too low. The warm brine temperature must be kept below 25 C (77 F) at all times to protect the mould table from too much thermal stress, which can reduce the life time of the mould table. Main drive All main functions are servo controlled through the PLC and HMI. The auxiliary functions and other functions with limited power demands are controlled and actuated pneumatically. The speed of the Tetra Pak Rotary Moulder 35 A2 moulded stick novelty freezer varies between 10 and 30 strokes per minute. Electric equipment The equipment is housed in a separate epoxy-coated power cabinet and consists of a main circuit breaker, circuit breakers, motor starters, variable frequency inverters including protection, control relays for heating elements, transformers for control voltage and a PLC and touch screen HMI (Operator panel). Control panel Operations are controlled from one control panel mounted on the machine. All functions are PLC controlled providing a high degree of automation. The control panel includes a touch screen operator panel and displays the ammonia evaporating temperature, temperatures for the cold brine and warm brine. The warm brine temperature is electronically controlled and is also displayed on the control panel. PLC and servo controllers are mounted in the control panel for easy and trouble-free installation. An audio warning alarm is also included. The touch screen also provides operation and diagnostic information. Communication with a central computer and a larger computer instead of the standard PLC can be supplied if required (see Optional equipment). Filling equipment The standard ice cream filler is designed as a drum type volumetric filler for top filling of ice cream and consists of a column and a filling head, on which the interchangeable filling equipment is mounted. Tetra Pak Automatic Stick multi A2 automatically loaded stick inserter It separates and inserts sticks automatically into the ice cream stick novelties, and the loading of sticks from bulks is also automatic. Included is a separate main drive, PLC control, main magazine for bulk cartons, servo stick feeder and a reserve stick magazine. Extractor and lay-off device The device consists of an in-line chain conveyor with 50 extractor arms carrying extractor tongs for wooden sticks. The tongs are made of hard metal/stainless steel. The products are transferred from the extracting arms by a servo controlled lay-off system direct to the top of the wrap lanes of the multi-lane wrapper. Individual exit function is included for pre-release, just before the lay-off position. Chocolate coating equipment This equipment is mounted beneath the extracting device and comprises a dipping cup and a drip tray with drip scraper. The height of the dipping is adjusted by the servo controlled down motion, according to the level of»dip«required. An external chocolate tank and a circulation pump are required, e.g. a Tetra Pak Pump Station (see Optional equipment). Washing and sterilizing apparatus For cleaning-in-place and sterilizing-in-place (CIP/SIP) of the mould table, a washing apparatus is supplied for mounting on the supporting rails on the brine tank. The apparatus requires connection to water and steam and proper cleaning detergents. Platforms Platforms of stainless steel covering the operation area are supplied.

4 Tetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer Standard equipment included in basic machine Main drives (servo controlled) Brine tank with cold brine circulation pump Defrosting system with warm brine circulation pump Control panel Plc control and touch screen operator panel Extractor in 16 rows Chocolate coating equipment Platforms of stainless steel Optional equipment 01 Filling equipment for one-coloured ice cream. 03 Moving product inlet system for uniform ice cream distribution in filler hopper. 04 Servo bottom filling machine for one-coloured ice cream. 05 Filling equipment for two-coloured ice cream, vertically divided. 06 Filling equipment for two-coloured ice cream, vertically divided in a zebra-pattern. 07 Filling equipment for two-coloured ice cream, concentric filling. 08 Filling equipment for the filling of two-coloured ice cream, horizontally divided. 09 Independent filling unit for one-coloured water ice (required for water ice). 10 Filling equipment for shell and core split ice: shell of water ice, core of ice cream. 11 Equipment for one-coloured water ice, but two different colours per radial row. (Three and four colours per radial row is also available.) 12 Filling equipment for two-coloured water ice, vertically divided (twin-type lolly only). 13 Pencil filler with equipment for two strings of ripple mass per bar. 14 Filling equipment for slushed water ice on standard ice cream filler, including moving product inlets and cut-off nozzles. 15 Dry coating equipment for coating the bars with granulated dry ingredients such as nuts, candy, etc. 16 Tetra Pak Combi Top Filler for ice cream with or without inclusions. The dosing volume is adjustable on-the-fly 17 Tetra Pak Volumetric Bottom Filler for viscous bottom filling of products with inclusions. 18 Tetra Pak Automatic Stick multi A2 Stick dispenser with automatic loading. The stick dispenser is an independent unit and is designed for mounting on the bar freezer. It dispenses sticks automatically and place them vertically into the ice cream bars, and the loading of sticks from bulks is also automatic. Included is a separate main drive, PLC control, main magazine for bulk cartons and a reserve stick magazine. 19 Tetra Pak Pump Station. 100 litres (26.5 gal.) chocolate floor tank with electrically heated and thermostatically controlled water jacket and electrically driven chocolate circulation pump. The floor tank is a separate unit on wheels and with hoses for connection to the dipping cup on the Tetra Pak Rotary Moulder 35 A2. 20 Rack for the storage of mould segments, galvanised or stainless steel 24 Extended set of spare parts for two years operation. 25 External plate heat exchanger for brine chilling. 26 Communication set with a central computer. 28 Mould table with alternative pocket and row configurations. The number of freezing pockets which can be fitted into a Tetra Pak Rotary Moulder 35 A2 mould table depends on the size and shape of the ice cream stick novelty. Between 12 and 28 freezing pockets per radial row is possible. The number of radial rows will depend on the thickness of the product (see tables under Capacity). Other optional equipment is available and full details can be obtained on request.

5 Product examples The numbers in the table below refer to the list of optional equipment in the previous page. Standard Optional equipment required equipment required A One-coloured water ice, two different colours per radial row 11 B Two-coloured water ice vertically divided (twin type) 12 C Pencil filled ice cream D Chocolate coated bars E Dry coated ice cream F One-coloured ice cream 01 or 16 G Bottom filled one-coloured ice cream 04 or 17 H Two-coloured ice cream vertically divided 05 or 16 I Two-coloured ice cream vertically divided zebra pattern J Two-coloured ice cream concentric or 16 K Two-coloured ice cream horizontally divided or 16 L One-coloured water ice 09 or 16 M Two-coloured water ice horizontally divided N Three-coloured water ice horizontally divided O Split ice or 16 A B C D E F G H I J K L M N O

6 Tetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer Technical data Electric motors Mould table servo index drive Servo choco dip Lay-down servo Extractor index servo Cold brine pump Booster pump to PHE Warm brine pump Chocolate drip tray Dry coating equipment Vacuum pump Juice return pump 3.9 kw (5.2 HP) 1.8 kw (2.4 HP) 1.8 kw(2.4 HP) 3.9 kw(5.2 HP) 7.5 kw(10 HP) 7.5 kw(10 HP) 1.5 kw (2.0 HP) 0.8 kw (1.1 HP) 1.1 kw (1.5 HP) 2.2 kw (3 HP) 0.55 kw (0.75 HP) Heating elements Warm brine, heated either by electricity or by steam. The choice must be made when ordering. Brine quantity Ammonia quantity For filling the evaporator Air consumption Standard machine Min. working pressure Max. dew point at atmospheric pressure corresponding to Normal working temperatures Evaporating temperature Temp. of cold brine Temp. of warm brine litres/7 700 kgs (1 585 gall./ lbs) 700 litres/458 kg (185 gall./1 070 lbs) 0.9 m³/min (32 ft 3 /min) 7 bars (102 psi) +5 C (+41 F) 45 C ( 49 F) 40 C ( 40 F) +20 C (+77 F) Installed max. effect Electricity Standard connection 3 x 400 Volts, 50 Hz AC Nominal load 180 Amps Main circuit breaker 250 Amps - when thawing by means of steam 20 kw - when thawing by means of electricity 101 kw Low pressure steam 100 kg (220 lbs)/h Consumption of max. effect when in production 55-75% 100 litre chocolate container (Tetra Pak Pump Station) 3 kw Cable for main power according to local regulations Pipe connections NH 3 liquid line, pump recirculation 89.9 mm (3 ½ ) NH 3 suction line 219 mm (8 3/5 ) Cold brine pipe size to / from PHE 100 mm (3,9 ) Main inlet for air 20 mm (¾ ) Refrigeration load Max. evaporator capacity up to 325 kw/279,000 kcal/h (93.2 TR) at 45 C ( 49 F) Weight in ready-to-work condition, approx kg ( lbs) Shipping data Net weight kg ( lbs) Gross weight kg ( lbs) Volume 100 m³ (3 530 ft 3 ) Main dimensions Total height mm (110 ) Height of table above floor mm (57 ) Normally required floor-to-ceiling height mm (118 ) Piping dimensions for ice cream not less than the outlet of the continuous freezer.

7 Typical layout Tetra Pak Rotary Moulder 35 A2 Tetra Pak Multilane Wrapper Measurements in mm Brine pipes not supplied by Tetra Pak Dimensions Measurements in mm

8 Tetra Pak International S.A., 2015, 80507, GB We reserve the rights to introduce design modifications without prior notice. Tetra Pak, and PROTECTS WHAT S GOOD are trademarks belonging to the Tetra Pak Group.

Tetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer

Tetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer Tetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer Here shown with Tetra Pak Volumetric Bottom Filler Highlights Operating principle Increased efficiency with servo controlled mould table index,

More information

Tetra Pak Linear Moulder 1500 A2 For high capacity production of moulded stick products

Tetra Pak Linear Moulder 1500 A2 For high capacity production of moulded stick products Tetra Pak Linear Moulder 1500 A2 For high capacity production of moulded stick products Highlights Highest singel index capacity on the market with multilane wrapping Flexible, modular mould cleaning system

More information

Tetra Pak Continuous Freezer S A2 Self-contained conntinuous freezers with built in refrigeration unit

Tetra Pak Continuous Freezer S A2 Self-contained conntinuous freezers with built in refrigeration unit Tetra Pak Continuous Freezer S A2 Self-contained conntinuous freezers with built in refrigeration unit Tetra Pak Continuous Freezer S700 A2 Tetra Pak Continuous Freezer S1500 A2 Highlights Robust design

More information

AIFe. Ice Cream Machiner y

AIFe. Ice Cream Machiner y Ice Cream Machiner y GRIGOLI STICK LINE Ice Cream Machinery GRIGOLI STICK LINE ROTARY AND IN LINE MACHINE AUTOMATIC ICE CREAM BAR FREEZER Application: Automatic, continuous production of ice cream, sherbet,

More information

Packaging Machinery and Engineered Food Plants

Packaging Machinery and Engineered Food Plants Packaging Machinery and Engineered Food Plants CF-10AS AUTOMATIC SERVO CUP FILLING AND SEALING MACHINE Introduction: Our customized cup Filling and sealing machines for premade cups can handle most types

More information

WCB Ice Cream. Introduces the. CREAM Freezer

WCB Ice Cream. Introduces the. CREAM Freezer WCB Ice Cream Introduces the CREAM Freezer It s NOT About Making the Coldest Ice Cream! It s About Making Better Ice Cream! The CREAM Freezer Produces Ice Cream With: Small Ice Crystal Size Small Air Cell

More information

Tetra Pak Indirect UHT unit PFF with tubular heat exchanger Efficient UHT unit for flexible production of ambient or hot-filled prepared food products

Tetra Pak Indirect UHT unit PFF with tubular heat exchanger Efficient UHT unit for flexible production of ambient or hot-filled prepared food products Efficient UHT unit for flexible production of ambient or hot-filled prepared food products Highlights High and consistent product quality Optimized flexibility due to an extensive variety of product- and

More information

Tetra Pak Pasteurizer D Efficient pasteurization for dairy applications

Tetra Pak Pasteurizer D Efficient pasteurization for dairy applications Efficient pasteurization for dairy applications Application Tetra Pak Pasteurizer for dairy applications is designed for continuous processing and pasteurization of market milk, cheese milk, yoghurt milk,

More information

MOTHER DAIRY A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED PURCHASE ENQUIRY

MOTHER DAIRY A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED PURCHASE ENQUIRY PURCHASE ENQUIRY Inquiry No : MDG/PUR/PKS/ENQ/Ice cream, Dated: 10 th Oct, 2014 Description : Purchase Inquiry for Supply, Installation and commissioning and testing of below listed Ice-cream Processing

More information

Food Processing Equipment. NEAEN VarioT SCRAPED SURFACE HEAT EXCHANGERS

Food Processing Equipment. NEAEN VarioT SCRAPED SURFACE HEAT EXCHANGERS Food Processing Equipment NEAEN VarioT SCRAPED SURFACE HEAT EXCHANGERS NEAEN VarioT Scraped surface heat exchangers are the professional solution used in a variety of manufacturing processes, ensuring

More information

PRECISION QUALITY RELIABILITY EUROPACK R RANGE PREMADE POUCHES & FILLING

PRECISION QUALITY RELIABILITY EUROPACK R RANGE PREMADE POUCHES & FILLING PRECISION QUALITY RELIABILITY EUROPACK R RANGE PREMADE POUCHES & FILLING DUPLEX MODEL (LIQUID & PASTE, PASTE WITH SOLIDS) RD-235 / LF-1000D Features Two sealing stations, one pressing station for perfect

More information

armfield Develop with us

armfield Develop with us explorearmfield.com armfield Develop with us Miniature-scale research & development technology MODULAR MINIATURE SCALE HTST/UHT PROCESS SYSTEM FT174X 2016 Armfield Ltd ISO 9001:2008 2YR EXTENDED WARRANTY

More information

Current Design of Ice Cream Freezers

Current Design of Ice Cream Freezers Current Design of Ice Cream Freezers Frozen Desert Center Conference October 22-23, 2018 STG/April 2015 Continuous Ice Cream Freezers The Dairy Industry in America, Ralph Seltzer, Magazines for Industry,

More information

4 Compact footprint 4 Constant view of the product 4 Easy filling 4 Simple adding of ingredients 4 Optimal texture and consistency for an easily

4 Compact footprint 4 Constant view of the product 4 Easy filling 4 Simple adding of ingredients 4 Optimal texture and consistency for an easily 4 Compact footprint 4 Constant view of the product 4 Easy filling 4 Simple adding of ingredients 4 Optimal texture and consistency for an easily scoopable gelato VERTICAL BATCH FREEZERS PROFESSIONAL &

More information

ICE-CREAM PRODUCTS En

ICE-CREAM PRODUCTS En ICE-CREAM PRODUCTS en Smarty TTi Combined unit for gelato and cremolata production Smarty TTi is the new Valmar s Touch & Type combined unit. Thanks to modern technological innovations this machine meets

More information

TENDER DOCUMENT. NIT No: DLI/C&E/WI-721/271 FOR

TENDER DOCUMENT. NIT No: DLI/C&E/WI-721/271 FOR TENDER DOCUMENT NIT No: DLI/C&E/WI-721/271 FOR Tender for Design, Supply, Erection and commissioning of Plant Equipment including Utility services complete 20 KLPD ICE Cream plant at Patna Turn Key basis

More information

Customized Packaging Machinery. Product Overview Liquid Filling Labelling Capping Conveyors Specialised Automation

Customized Packaging Machinery. Product Overview Liquid Filling Labelling Capping Conveyors Specialised Automation Customized Packaging Machinery Product Overview Liquid Filling Labelling Capping Conveyors Specialised Automation Mission Statement Company Profile Tigre Solutions aims to supply professional services

More information

Chocolate and Cheese

Chocolate and Cheese Chocolate and Cheese Enrobers - Temperers Cooling Tunnels - Melting Tanks E220 CHOCOLATE ENROBER 2 E220 CHOCOLATE ENROBER 3 2MP SERIES ENROBERS 2MP Series Enrobers The 2MP Series offer S4 models, each

More information

Qb8-4 UNIVERSAL PROCESSING SYSTEM

Qb8-4 UNIVERSAL PROCESSING SYSTEM Qb8-4 UNIVERSAL PROCESSING SYSTEM EN Qb8 Compact and extremely versatile. Qb8-4 TABLE TOP Qb8-4 is the perfect choice for small production batches that require high quality results. Built using the same

More information

Driven by innovation. Industrial Equipment

Driven by innovation. Industrial Equipment Industrial Equipment INDEX page Injector 3 Flaker 4 Bowlcutter 5 Vacuum Tumblers 6 N & N Mixers 7-8 N & N Buggies 9 Emulsifier 10 Handtmann 11-13 Spooling Device 14 Hamburger Former 15 PR15 INJECTOR 310367

More information

SYRINGES PROCESSING OF PRE-STERILIZED SYRINGES

SYRINGES PROCESSING OF PRE-STERILIZED SYRINGES SYRINGES PROCESSING OF PRE-STERILIZED SYRINGES STERIFILL RS SERIES STERIFILL RS is a filling and stoppering machine for ready-to-fill, disposable syringes in nests. The use of such kind of drug delivery

More information

MIXER TYPE MAZ-550/CD

MIXER TYPE MAZ-550/CD MIXER TYPE MAZ-550/CD Atmospheric version (no vacuum) Capacity: 550 lt. 2 blades ZZ C/1, fixed speed scraping inner wall. Double jacketed vessel for water recirculation. Dumping vessel. Full cover hydraulic

More information

Levels of Production

Levels of Production Levels of Production Syllabus Link: H1.1: Explains manufacturing processes and technologies used in the production of food products. Levels of Production All food manufacturers process and package foods

More information

Beverage Processing System

Beverage Processing System Beverage Processing System The Beverage Processing System provided by Ecomax Industries can be catered to suit client preferences, making them automatic or semi-automatic as required. Ecomax Industries

More information

Integrated Packaging Systems, Inc.

Integrated Packaging Systems, Inc. Integrated Packaging Systems, Inc. Tablet Filling Liquid Filling Design for your success Bottle Handling Integrated Packaging Systems, Inc. IPS is a leader in design and manufacturing of packaging machinery

More information

SELMI. The Chocolate Machine

SELMI. The Chocolate Machine SELMI The Chocolate Machine Selmi, a company founded in 1965 by Renato Selmi, initially started processing hazelnut paste and only later on did it concentrate its strengths in the specialisation of the

More information

03-08 Individually Quick Freezer Conveyor ( IQF ) Horizontal Contact Freezer Air Blast Freezer ( Cabinet & Tunnel type )

03-08 Individually Quick Freezer Conveyor ( IQF ) Horizontal Contact Freezer Air Blast Freezer ( Cabinet & Tunnel type ) IN DU ST RI AL RE FR IG ER AT IO N 1 CONTENT 03-08 Individually Quick Freezer Conveyor ( IQF ) 09-11 Horizontal Contact Freezer 12-13 Air Blast Freezer ( Cabinet & Tunnel type ) 14 Horizontal Shell and

More information

Miniature-scale research & development technology

Miniature-scale research & development technology 2-YRWARRANTYONALLARMFIELDPRODUCTS A n I S O9 0 01 C o m p a n y FT174X Modular Miniature Scale HTST/UHT Process System NEW product features Armfield Ltd. 2011 Totally Modular System Direct and/or indirect

More information

cussons Refrigeration Assembly Range TECHNOLOGY REFRIGERATION AND AIR CONDITIONING CUSSONS TECHNOLOGY LABORATORY RECOMMENDATION

cussons Refrigeration Assembly Range TECHNOLOGY REFRIGERATION AND AIR CONDITIONING CUSSONS TECHNOLOGY LABORATORY RECOMMENDATION REFRIGERATION AND AIR CONDITIONING CUSSONS LABORATORY RECOMMENDATION Cussons Refrigeration laboratories are offered to provide teaching to a range of different skill levels. In all the laboratories teaching

More information

Integrated Packaging Systems, Inc.

Integrated Packaging Systems, Inc. Integrated Packaging Systems, Inc. Tablet Filling Liquid Filling Design for your success Bottle Handling ProCount Tablet Counter/Filler The ProCount Slat Counter/Filler is our flagship tablet counter.

More information

TMCI Padovan Evaporators

TMCI Padovan Evaporators TMCI Padovan Evaporators Evaporators Our range includes 4 types of evaporators: Forced Circulation Falling Film Evaporators Plates Thin Film Concentration systems Evaporator choosing criteria: product

More information

Compact, versatile and energy saving!!!

Compact, versatile and energy saving!!! Compact, versatile and energy saving!!! Bar 10 C85N 20-25-B Compact, versatile and energy saving!!! ModulBlock range of machines feature the possibility to supply tailor-made solutions, enabling to combine

More information

EBAC MODEL CD30 INDUSTRIAL DEHUMIDIFIER OWNER S MANUAL

EBAC MODEL CD30 INDUSTRIAL DEHUMIDIFIER OWNER S MANUAL EBAC MODEL CD30 INDUSTRIAL DEHUMIDIFIER OWNER S MANUAL Ebac Industrial Products 704 Middle Ground Boulevard Newport News, VA 23606 Tel: 757 873 6800 Fax: 757 873 3632 Website: www.ebacusa.com UNPACKING

More information

IRD INFRARED ROTARY DRUM HEATING. DRYING. CRYSTALLIZING. COATING.

IRD INFRARED ROTARY DRUM HEATING. DRYING. CRYSTALLIZING. COATING. IRD INFRARED ROTARY DRUM HEATING. DRYING. CRYSTALLIZING. COATING. MINIMAL PROCESSING TIMES HIGH FLEXIBILITY LOW ENERGY CONSUMPTION KREYENBORG is a leading provider of solutions in the field of bulk material

More information

ICE-CREAM PRODUCTS En

ICE-CREAM PRODUCTS En ICE-CREAM PRODUCTS en GELATO... soft, creamy and not easily melting!!! The new series of Valmar batch freezers, called Snowy, is a new technological score achieved in the field of artisan gelato production

More information

ORTEC HIGH CAPACITY REFRIGERATED AIR/GAS DRYERS

ORTEC HIGH CAPACITY REFRIGERATED AIR/GAS DRYERS ORTEC Compressed Air, Gas & Fluid Technologies HIGH CAPACITY REFRIGERATED AIR/GAS DRYERS Energy Lean Planet Green Cycling and Non-Cycling Design Energy Efficient s Fluctuating and Intermittent Loads Capacity,0

More information

TECHNICAL INFORMATION DOGASEPTIC

TECHNICAL INFORMATION DOGASEPTIC TECHNICAL INFORMATION DOGASEPTIC Cup filling and sealing machine Hygiene Standards ultra-clean, aseptic Machine Types DS 42P, DS 62P, DS 82P, DS 101P COMPLETE LINE We offer the project design of a complete

More information

DEPS Mini Dairy equipment for the making of a range of fresh and soft cheeses

DEPS Mini Dairy equipment for the making of a range of fresh and soft cheeses PO Box 4309, Palmerston North, New Zealand Phone: 64 6 353 3640, Facsimile: 64 6 353 3644 Email: inquiries@deps.co.nz Web: www.deps.co.nz DEPS Mini Dairy equipment for the making of a range of fresh and

More information

VOLUME 2 (BOQ & Price Bid)

VOLUME 2 (BOQ & Price Bid) TENDER DOCUMENT NIT No: PAT/CON/721/01 FOR Tender for Supply, Erection & Commissioning of Refrigeration Plant for chilled water system for Ice-Cream mix section complete for 20 KLPD Ice Cream Plant at

More information

Inline Cup Filler. AFIC - Series

Inline Cup Filler. AFIC - Series M a c h i n e r y Inline Cup Filler AFIC - Series Inline Cup Filler Principle Function: The highly flexible and hygienic Inline Cup Filler, from the series AFIC, is solidly built and easy to operate. This

More information

Description of the turbo separators TP451/

Description of the turbo separators TP451/ Description of the turbo separators TP451/2975.02 Automatic turbo cleaning machine VD-60.2975d Suitable for cleaning 460 x 500 l grinding oil/min. consisting of 8 Schneeberger grinding machines to separate

More information

Call us today! (800)

Call us today! (800) 150 TON AIR-COOLED CHILLER PA-ACCTR-150 Call us today! (800)341-4297 The 150-Ton portable chiller package features a Trane RTAC chiller unit. Trane leads the industry in providing some of the most reliable,

More information

EASY CONFECTIONARY FOOD SERVICE

EASY CONFECTIONARY FOOD SERVICE EASY CAFETERIA CONFECTIONARY FOOD SERVICE it EN Small dimensions, great performances EASY TTi is the first space-saving multipurpose batch freezer for use at point of sale. The hot & cool version produces

More information

EBAC MODEL BD-150 ( ) INDUSTRIAL DEHUMIDIFIER OWNER S MANUAL

EBAC MODEL BD-150 ( ) INDUSTRIAL DEHUMIDIFIER OWNER S MANUAL EBAC MODEL BD-150 (1025000) INDUSTRIAL DEHUMIDIFIER OWNER S MANUAL BD-150 OWNERS MANUAL Page 1 of 12 INTRODUCTION Designed for a wide range of applications, the BD-150 dehumidifier is a super high capacity

More information

Falling Film Chiller. water down to 0,5 C

Falling Film Chiller. water down to 0,5 C Falling Film Chiller BUCOdelot water down to 0,5 C Application fields Industrial chilling of food fish, meet, poultryl fruit, vegetables milk, milk products softdrink production production of baked goods

More information

LYODEL FREEZE DRYING SYSTEMS

LYODEL FREEZE DRYING SYSTEMS CRYO TECH LYODEL FREEZE DRYING SYSTEMS DELVAC PUMPS PVT. LTD. An ISO 9001:2000 certified company Delvac offers complete range of Lyodel Freeze Dryers and accessories for quick and efficient sample preparation.

More information

Küba SG commercial

Küba SG commercial GEA Küba 42 Küba Blue Line : Specific advantages High performance air cooler for commercial applications with a large scope and complete capacity spectrum. Draw-through fans guide the air flow evenly through

More information

Thermostatic expansion valves for ammonia Type TEA

Thermostatic expansion valves for ammonia Type TEA Data sheet Thermostatic expansion valves for ammonia Type TEA Thermostatic expansion valves regulate the injection of refrigerant liquid into evaporators. Injection is controlled by the refrigerant superheat.

More information

in/out connections outer Ø 25 bar (363 psi) 200 kg/h SS '000 (2.12 HP) 300 kg/h CU (661 lb/h) (3.18 HP) 300 kg/h SS (661 lb)

in/out connections outer Ø 25 bar (363 psi) 200 kg/h SS '000 (2.12 HP) 300 kg/h CU (661 lb/h) (3.18 HP) 300 kg/h SS (661 lb) CO 2 Vaporising Atmospheric ASCO CO 2 Vaporiser The atmospheric ASCO CO 2 Vaporiser has been developed to drastically reduce CO 2 vaporisation costs. Ambient air, which is available at no cost, is used

More information

G. MONDINI DOSATRICI-CONFEZIONATRICI AUTOMATICHE. Tray Sealer Trave-340

G. MONDINI DOSATRICI-CONFEZIONATRICI AUTOMATICHE. Tray Sealer Trave-340 Technical Documentation G.Mondini S.p.A. G. MONDINI Tray Sealer TRAVE-340 SpA DOSATRICI-CONFEZIONATRICI AUTOMATICHE Tray Sealer Trave-340 Tool sizes are 300mm in width and 400 in length, number of trays

More information

SPIRAL FREEZING & CHILLING SYSTEMS

SPIRAL FREEZING & CHILLING SYSTEMS SPIRAL FREEZING & CHILLING SYSTEMS www.lomaxtech.com WORLD LEADING SPIRAL FREEZING & CHILLING SYSTEMS LOMAX DELIVERS INNOVATIVE WORLD LEADING SPIRAL FREEZING & CHILLING SYSTEMS ACROSS THE GLOBE. When it

More information

Equipment Information

Equipment Information 2050D Equipment Information INDEX: DESCRIPTION AND KEY FEATURES LAYOUT NOMINAL TECHNICAL DATA CONFIGURATION www.sealedair-emea.com Reg. U.S. Pat. & TM Off. Sealed Air Corporation 2009. All rights reserved.

More information

PHARMA FAB INDUSTRIES

PHARMA FAB INDUSTRIES INDUSTRIES A LEADING NAME FOR RIGHT CHOICE OF PHARMACEUTICAL MACHINERIES ( AN ISO 9001 : 2008 CERTIFIED COMPANY ) ' ' FLUID BED DRYER Short Drying Time. Electric / Steam Heated. Low Drying Temperature.

More information

VOLUME 3 (Technical Specifications as Annexure-A & Drawing)

VOLUME 3 (Technical Specifications as Annexure-A & Drawing) NIT No: PAT/CON/721/01 FOR Tender for Supply, Erection & Commissioning of Refrigeration Plant for chilled water system for Ice-Cream mix section complete for 20 KLPD Ice Cream Plant at Phulwarisharif,

More information

EBAC MODEL K100 DEHUMIDIFIER OWNER S MANUAL

EBAC MODEL K100 DEHUMIDIFIER OWNER S MANUAL EBAC MODEL K100 DEHUMIDIFIER OWNER S MANUAL Ebac Industrial Products 700 Thimble Shoals Boulevard Newport News VA 23606-2575 Telephone (757) 873-6800 Fax (757) 873-3632 Website: www.ebacusa.com INTRODUCTION

More information

ANY WASHER FOR ANY NEED.

ANY WASHER FOR ANY NEED. BUYERS GUIDE SAFER. CLEANER. FASTER. ANY WASHER FOR ANY NEED. Specialists in the Food, Nutraceutical & Distribution Industries Since 1979, Douglas Machines Corp. has offered a very special alternative

More information

Standard Features. Performance/Capacities

Standard Features. Performance/Capacities TSC-66 Traditional Power/Connections Approximate Total Load AMPS 208V / 60HZ / 3PH 51.8 208V / 60HZ / 1PH 88.3 230V / 60HZ / 3PH 47.8 230V / 60HZ / 1PH 81.5 460V / 60HZ / 3PH 23.9 Booster Heater Options

More information

Quality Construction Equipment

Quality Construction Equipment Quality Construction Equipment ASPHALT BATCH MIX PLANT ANP Series - 60 to 240 tph ASPHALT BATCH MIX PLANT Apollo has always been proactive in rising to customer demands and expectations by providing quality

More information

ECOPlus SERIES OF HIGH-PRESSURE METERING MACHINES

ECOPlus SERIES OF HIGH-PRESSURE METERING MACHINES ECOPlus SEIES OF HIGH-PESSUE METEING MACHINES The OMS ECOPlus series of high-pressure metering units provides the ideal solution for every PU application. eliability, ease of operation and attractive price-performance

More information

VACUUM COOKING EMULSIFYING PLANT

VACUUM COOKING EMULSIFYING PLANT Food Processing Equipment The ProfiCut VACUUM COOKING EMULSIFYING PLANT The ProfiCut vacuum cooking emulsifying mixer is a universal plant for the manufacture of a wide range of products such as processed

More information

Why use Blast Chiller or Freezer?

Why use Blast Chiller or Freezer? Why use Blast Chiller or Freezer? Food safety is of utmost importance in all food industries. Time and temperature relationship are critical to the growth and spread of contamination. Bacteria multiplies

More information

BATCH ATMOSPHERIC COOKER

BATCH ATMOSPHERIC COOKER Food Processing Equipment The NEAEN Unicook BATCH ATMOSPHERIC COOKER The universal batch cooker NEAEN Unicook is an effective and affordable solution for the preparation of various food products, offering

More information

Technical description

Technical description Rail profile grinding machine NRG Technical description Nencki Ltd Railway Technology Gaswerkstrasse 27 4901 Langenthal Switzerland Tel. +41 62 919 93 93 Fax +41 62 919 93 90 railway@nencki.ch www.nencki.ch

More information

A: BATCH MIXER. Schaaf Technologie GmbH HORIZONTAL BATCH MIXER 450 / 900L

A: BATCH MIXER. Schaaf Technologie GmbH HORIZONTAL BATCH MIXER 450 / 900L A: BATCH MIXER HORIZONTAL BATCH MIXER 450 / 900L For mixing dry raw materials. The portioned mixture components are put into the mixer and are mixed together intensively for several minutes. The batch

More information

Food Processing Equipment. ProfiCook VACUUM PROCESSING PLANT

Food Processing Equipment. ProfiCook VACUUM PROCESSING PLANT Food Processing Equipment ProfiCook VACUUM PROCESSING PLANT The ProfiCook vacuum processing plant is a highly efficient and reliable solution for manufacturing a wide range of food products, such as mayonnaise,

More information

Milk cooling systems

Milk cooling systems Milk Cooling Systems Milk cooling systems Milk Cooling Systems DARI-KOOL DX-FF 1. High Durability Every DX-FF tank is manufactured from high quality stainless steel resulting in a superior hygienic finish.

More information

+91-8048762692 Modern Flexi Packaging System Private Limited http://www.modernflexipackaging.com/ We are highly recognized firm engaged in manufacturing, exporting, supplying and trading wide assortment

More information

CDP 40 SWIMMING POOL DEHUMIDIFIER

CDP 40 SWIMMING POOL DEHUMIDIFIER CDP 40 SWIMMING POOL DEHUMIDIFIER Function The CDP 40 is an energy efficient and quiet pool dehumidifier. It works in accordance with the condensation principle. A fan draws the humid air into the dehumidifier

More information

Blast Freezers and Chillers for Ice Cream Parlors, Confectioners, Bakeries, Delicatessens and Restaurants

Blast Freezers and Chillers for Ice Cream Parlors, Confectioners, Bakeries, Delicatessens and Restaurants Blast Freezers and Chillers for Ice Cream Parlors, Confectioners, Bakeries, Delicatessens and Restaurants Carpigiani Nordika blast freezers are professional ice cream machines for ice cream parlors who

More information

MULTIFILL SERIES PHARMA HIGH SPEED ROTARY FILLING & CLOSING MACHINES

MULTIFILL SERIES PHARMA HIGH SPEED ROTARY FILLING & CLOSING MACHINES MULTIFILL SERIES PHARMA HIGH SPEED ROTARY FILLING & CLOSING MACHINES MULTIFILL F500 SERIES Multifill F500 Series of rotary filling and closing machines is the result of over 40 years activity in the field

More information

Hi-Pres. Self Contained A/C Unit HI-PRES MARINE & OFFSHORE

Hi-Pres. Self Contained A/C Unit HI-PRES MARINE & OFFSHORE Hi-Pres Self Contained A/C Unit TYPE SCU-C & SCU-W Product specifications HI-PRES MARINE & OFFSHORE Contents Introduction..................... 2 Type SCU-W.......................... 2 Type SCU-C...........................

More information

DRYING OF MILK SPRAY DRYING

DRYING OF MILK SPRAY DRYING College of Agricultural Engineering and Technology Dept. of Agricultural Processing and Food Engineering Course : Dairy and Food Engineering Chapter 10 DRYING OF MILK (Objectives of milk drying, Spray

More information

MANAGING ENERGY EFFICIENTLY FOOD, DAIRY AND BEVERAGE INDUSTRIES

MANAGING ENERGY EFFICIENTLY FOOD, DAIRY AND BEVERAGE INDUSTRIES MANAGING ENERGY EFFICIENTLY FOOD, DAIRY AND BEVERAGE INDUSTRIES HRS Heat Exchangers provide a range of heat exchangers, components, modules and complete processing systems that help you to optimise production,

More information

Call us today! (800)

Call us today! (800) 500 TON AIR-COOLED CHILLER PA-ACCTR-500 Call us today! (800)341-4297 The 500-Ton portable chiller package features a Trane RTAC chiller unit. Trane leads the industry in providing some of the most reliable,

More information

Call us today! (800)

Call us today! (800) PA-ACCTR-200 Call us today! (800)341-4297 The 200-Ton portable chiller package features a Trane RTAC chiller unit. Trane leads the industry in providing some of the most reliable, efficient and quiet chiller

More information

EBAC MODEL CD30 INDUSTRIAL DEHUMIDIFIER OWNER S MANUAL

EBAC MODEL CD30 INDUSTRIAL DEHUMIDIFIER OWNER S MANUAL EBAC MODEL CD30 INDUSTRIAL DEHUMIDIFIER OWNER S MANUAL Ebac Industrial Products, Inc. 700 Thimble Shoals Blvd, Suite 109 Newport News, VA. 23606-2575 Tel: (757) 873 6800 Fax: (757) 873 3632 Website www.ebacusa.com

More information

The SPX World of Industrial Drying Technologies

The SPX World of Industrial Drying Technologies The SPX World of Industrial Drying Technologies White Paper Table of Contents Introduction to SPX Flow Technology 3 Vision and commitment 3 Customer focus 3 Spray Dryers 4 Vacuum and freeze drying 6 Freeze

More information

EN l Senking Batch Transfer Drying Tumbler DT Senking Batch Transfer Drying Tumbler DT High performance with less energy

EN l Senking Batch Transfer Drying Tumbler DT Senking Batch Transfer Drying Tumbler DT High performance with less energy EN l Senking Batch Transfer Drying Tumbler DT 60 240 Senking Batch Transfer Drying Tumbler DT 60 240 High performance with less energy Single dryer with loading belt. directly side by side. The dryers

More information

PRE-BATCHER UNIT DRYER UNIT. Model: RM 350. Year of construction: Composed of:

PRE-BATCHER UNIT DRYER UNIT. Model: RM 350. Year of construction: Composed of: Asphalt Plant INTRAME 350 RM Alicante, 24.10.2017 Asphalt Plant INTRAME 350 RM Offer number: A-160509-1994-01 Brand: INTRAME Model: RM 350 Capacity: 350 t/h Year of construction: 1994 Refurbished: 2004

More information

Soupper Dieta / SOUPPER 2017

Soupper Dieta / SOUPPER 2017 Soupper Intelligent Dieta kettles Dieta Group is a Finnish group of companies specialised in providing professional kitchens, restaurants and the food industry with innovative technologies, products and

More information

SECOND HAND ASPHALT PALANT FOR SALE

SECOND HAND ASPHALT PALANT FOR SALE . BITUMEN STORAGE DREDGING EQUIPMENT QUARRY INSTALLATIONS. Unit 1, Burnhouse Industrial Estate, Burnhouse Industrial Estate, Whitburn, West Lothian, EH47 0LQ SECOND HAND ASPHALT PALANT FOR SALE Manufacturer:

More information

Snack Production Plants

Snack Production Plants Snack Production Plants The Company Engineered Snacks HEBENSTREIT supplies automated extrusion plants for the production of savoury and sweet snacks. Our scope of supply ranges from the raw material mixer

More information

Dairy Products. Module 2 Dairy Technology ABC Food Safety Online

Dairy Products. Module 2 Dairy Technology ABC Food Safety Online Dairy Products Module 2 Dairy Technology ABC Food Safety Online Dairy Products: Module 2 Dairy Technology Aim This module will provide delegates with an overview of the most important pieces of equipment

More information

Your best bet for everything under the cherry, in the frosted glass and above the cone since Product Catalog

Your best bet for everything under the cherry, in the frosted glass and above the cone since Product Catalog Your best bet for everything under the cherry, in the frosted glass and above the cone since 1929. Product Catalog Yesterday Founded in 1929, SaniServ began as a manufacturer of amusement park equipment

More information

Thermal solutions. Solution overview for the food and beverage industry

Thermal solutions. Solution overview for the food and beverage industry Thermal solutions Solution overview for the food and beverage industry Clean, lean, green machines Your customers want to be sure the products they buy for their families are fresh, delicious, convenient

More information

Depositing - The Future of Hard Candy

Depositing - The Future of Hard Candy Depositing - The Future of Hard Candy By Martin J. Bond - Chief Engineer, Confectionery Products Tony Prange - Senior Application Engineer Baker Perkins Ltd Introduction Hard candy depositing is a process

More information

IRD INFRAROT DREHROHR IRD INFRARED ROTARY DRUM ERWÄRMEN. TROCKNEN. KRISTALLISIEREN. COATEN. HEATING. DRYING. CRYSTALLIZING. COATING.

IRD INFRAROT DREHROHR IRD INFRARED ROTARY DRUM ERWÄRMEN. TROCKNEN. KRISTALLISIEREN. COATEN. HEATING. DRYING. CRYSTALLIZING. COATING. IRD INFRAROT DREHROHR IRD INFRARED ROTARY DRUM ERWÄRMEN. TROCKNEN. KRISTALLISIEREN. COATEN. HEATING. DRYING. CRYSTALLIZING. COATING. 1 MINIMAL PROCESSING TIMES HIGH FLEXIBILITY LOW ENERGY CONSUMPTION 2

More information

QUALITY WITHOUT COMPROMISE

QUALITY WITHOUT COMPROMISE QUALITY WITHOUT COMPROMISE FOOD PACKAGING AND FOOD PROCESSING VACUUM PACKAGING CHAMBERS TRAY SEALERS THERMOFORMING MACHINES TUMBLERS AND MASSAGERS SMOKEHOUSES, COOKING/DRYING UNITS, STEAM COOKING HOUSES

More information

Version 7 1/ LXP

Version 7 1/ LXP SECTION 11600 LABORATORY GLASSWARE WASHER Model 1600 LXP PART 1 GENERAL 1.01 SYSTEM DESCRIPTION A. Laboratory Glassware Washer/Dryer 1.02 SUBMITTALS A. Bill of Materials B. Product Literature C. Installation

More information

ICE CUBES, ICE-LOLLIES, ICE-CREAM

ICE CUBES, ICE-LOLLIES, ICE-CREAM ICE CUBES, ICE-LOLLIES, ICE-CREAM Est. 1970 A TOP 300 COMPANY & more FEATURED MACHINES IN THIS INFO PACK ICE CUBE MACHINES ICE-BLOCKS/ BRICKS BUSINESS OPPORTUNITY MACHINES. SOLUTIONS for JOB CREATION,

More information

Volkmann Vacuum Conveying Applications

Volkmann Vacuum Conveying Applications Volkmann Vacuum Conveying Applications Systems and Solutions for the Hygienic and Safe Handling of Powders for the Chemical, Food, Pharmaceutical and Color/Lacquer Industries Vacuum Conveying Applications

More information

ANNEXURE-A SPECIFICATIONS FOR HOT MIX PLANT

ANNEXURE-A SPECIFICATIONS FOR HOT MIX PLANT ANNEXURE-A SPECIFICATIONS FOR HOT MIX PLANT COLD AGGREGATE BIN FEEDER FEEDING HOPPERS Four Nos. Cold aggregates hopper with a heaped capacity of approx. 52 T. Wide opening bin width to accommodate different

More information

Version 7 1/ LX

Version 7 1/ LX SECTION 11600 LABORATORY GLASSWARE WASHER Model 1300 LX PART 1 GENERAL 1.01 SYSTEM DESCRIPTION A. Laboratory Glassware Washer/Dryer 1.02 SUBMITTALS A. Bill of Materials B. Product Literature C. Installation

More information

SECTION LIQUID SYRUP MFG PLANT Ø STORAGE TANK COLLODIAL MILL MOC SS 304/ SS 316 /SS 316L Ø Ø Ø

SECTION LIQUID SYRUP MFG PLANT Ø STORAGE TANK COLLODIAL MILL MOC SS 304/ SS 316 /SS 316L Ø Ø Ø SECTION LIQUID SYRUP MFG PLANT MOC SS 304/ SS 316 /SS 316L CAPACITY 50 LTRS TO 10000 LTRS TOP ENTRY STIRRER CAN BE PROVIDED PLANT CAN BE EQUIPPED WITH CIP & SIP SYSTEM FULLY AUTOMATIC & SEMI AUTOMATIC

More information

Hygiene Rotary Filler & Capper. AFRB Series Servo Driven CNC Rotary Filler and Capper

Hygiene Rotary Filler & Capper. AFRB Series Servo Driven CNC Rotary Filler and Capper M a c h i n e r y Hygiene Rotary Filler & Capper AFRB Series Servo Driven CNC Rotary Filler and Capper Hygiene Rotary Filler and Capper The Principle Function: The highly flexible Hygiene Rotary Filling

More information

New Recycling and Waste Management System

New Recycling and Waste Management System New Recycling and Waste Management System The Town of Cochrane is set to launch a new automated recycling and waste management system by early summer 2012. This new system will help save taxpayer dollars

More information

The new TTi series en

The new TTi series en The new TTi series en The new TTi series The new TTi series machines for ice-cream products and confectionary is the result of Valmar s thirty-year experience and R&D in this sector. The new TTi series

More information

FROST FREE FRIDGE FREEZER INSTRUCTION MANUAL. Model No.: PRT260FFSL/ PRT260FFW

FROST FREE FRIDGE FREEZER INSTRUCTION MANUAL. Model No.: PRT260FFSL/ PRT260FFW FROST FREE FRIDGE FREEZER INSTRUCTION MANUAL Model No.: PRT260FFSL/ PRT260FFW This booklet contains the information you will require to install and operate your new appliance. It is important and worthwhile

More information

ICED CAPPUCCINO MACHINE Taylor MODEL: 390

ICED CAPPUCCINO MACHINE Taylor MODEL: 390 4.8.6.3 ICED CAPPUCCINO MACHINE Taylor MODEL: 390 LOCATION: Front of House WHEN CLEANED: Daily, Weekly, Monthly, Seasonal TOOLS/SUPPLIES REQUIRED: Salmon Cloth 2 or 3-Compartment Sink Sink Detergent Sanitizer

More information

Equipment Information

Equipment Information 8600-14DC Equipment Information INDEX: DESCRIPTION AND KEY FEATURES LAYOUT NOMINAL TECHNICAL DATA CONFIGURATION Sealed Air Ltd. Clifton House, 1 Marston Road St. Neots GB-Cambridgeshire PE19 2HN United

More information