STANDARDS TASK GROUP REPORT

Transcription

1 STANDARDS TASK GROUP REPORT THE SCOPE OF THE STANDARDS TASK GROUP INCLUDES ADDING CROSS- REFERENCES TO TABLE 14-1 AND RECOMMEND WHERE SUCH REFERENCES ARE APPLICABLE TO THE REFERENCED STANDARDS AND TO UPDATE THE FORMAT OF STANDARDS REFERENCING MATERIALS AND PRODUCTS. THE RECOMMENDED PROPOSED CODE CHANGES WERE PLACED IN THE MONOGRAPH BASED ON NUMERICAL ORDER ALONG WITH THE ITEM NUMBER AS SHOWN NEXT THE PROPOSALS. THE FOLLOWING ARE RECOMMENDATIONS FROM THE STANDARDS TASK GROUP.

2 THE SCOPE OF THE STANDARDS TASK GROUP INCLUDES ADDING CROSS-REFERENCES TO TABLE 14 1 AND RECOMMEND WHERE SUCH REFERENCES ARE APPLICABLE TO THE REFERENCED STANDARDS AND TO UPDATE THE FORMAT OF STANDARDS REFERENCING MATERIALS AND PRODUCTS. THE RECOMMENDED PROPOSED CODE CHANGES WERE PLACED IN THE MONGRAPH BASED ON NUMERICAL ORDER ABOING WITH THE ITEM NUMBER AS SHOWN NEXT TO THE PROPOSALS. THE FOLLOWING ARE RECOMMENDATIONS FROM THE STANDARDS TASK GROUP. CHAPTER 14 MANDATORY REFERENCED STANDARDS TABLE 14 1 Standards for Materials, Equipment, Joints and Connections Where more than one standard has been listed for the same meterail or method, the relevant portions of all such standards shall apply. AHAM DW * Household Electric Dishwashers Appliances 401.1, AHAM DW-2PR-92 Plumbing Requirements for Household Dishwashers (Discontinued) Appliances AHAM FWD Food Waste Disposer Units Appliances 401.1, 404.4, AHAM FWD-2PR-89 Household Food Waste Disposer Units (Discontinued) Appliances ANSI A Ductile-Iron and Gray-Iron Fittings, 3 in. through 48 in. (75 mm through 1,200 mm), for Water and Other Liquids (same as AWWA C110) Piping, Ferrous 1

3 ANSI A Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings (same as AWWA C111) Piping, Ferrous ANSI A Ductile-Iron Pipe, Centrifugally Cast, for Water (same as AWWA C151) Piping, Ferrous ANSI A Ductile-Iron Compact Fittings, 3 in. through 24 in. (76 mm through 610 mm) and 54 in. through 64 in. (1400 mm through 1600 mm), for Water Service (same as AWWA C153) Piping, Ferrous ANSI B Pipe Threads (Except Dry seal) (replaced by ASME B ) Joints ARI Drinking Fountains and Self-Contained, Mechanically Refrigerated Drinking Water Coolers (Offically Withdrawn) Fixture ASCE Earthquake Actuated Automatic Gas Shutoff Devices Fuel Gas 1201 ASHRAE * Energy Standard for Buildings Except Low-Rise Residential Buildings Miscellaneous 501 ANSI ASME A (R03) * Scheme for the Identification of Piping Systems Piping ASME A Air Gaps in Plumbing Systems Fittings Table 6-2, Table 6-3,

4 ASME A (R05) * Air Gap Fittings for Use with Plumbing Fixtures, Appliances, and Appurtenances Fixtures Table 6-2, , 801.1, 806.0, ASME A Performance Standard and Installation Procedures for Stainless Steel Drainage Systems for Sanitary, Storm, and Chemical Applications, Above and Below Ground (Note 1) Piping, Ferrous 701.1, 701.2, 707.1, Table 7-1 ASME A (R04) * Macerating Toilet Systems and Related Components Fixtures ASME A (R02) Water Heater Relief Valve Drain Tubes Appliances ASME A Water Closet Personal Hygiene Devices Fixtures ASME A (R04) Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System Piping ASME A * Point of Use and Branch Water Submetering Systems Miscellaneous 301 ASME A M-97 (R02) Floor-Affixed Supports for Off-the-Floor Plumbing Fixtures for Public Use Fixtures , ASME A (R04) Framing-Affixed Supports for Off-the-Floor Water Closets with Concealed Tanks Fixtures 316.3,

5 ASME A Floor and Trench Drains DWV Components ASME A Roof, Deck, and Balcony Drains DWV Components ASME A Enameled and Epoxy Coated Cast Iron and PVC Plastic Sanitary Floor Sinks Fixtures Table 4-1 footnote (9), ASME A Backwater Valves Valves ASME A (R04) * Grease Interceptors Fixtures , ASME A * Grease Removal Devices Fixtures ASME A / CSA B Plumbing Supply Fittings Fixtures Fittings , ASME A / CSA B Plumbing Waste Fittings Fittings 404.3, 701.0, ASME A * Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixtures Fittings Kitchen, Lavatory, shampoobowls, and Shower Fittings with Flexible Hose ,

6 ASME A Flexible Water Connectors Piping , 604.4, , ASME A (R04) Deck Mounted Bath/Shower Transfer Valves with Integral Backflow Protection Valves , ASME A M-94 (R04) Enameled Cast-Iron Plumbing Fixtures (Supplement ) Fixtures 401.1, 411.5, 411.6, 411.7, ASME A M * Vitreous China Plumbing Fixtures and Hydraulic Fixtures Requirements for Water Closets and Urinals Fixtures 401.1, 402.1, 402.2, 402.3, 408.0, 410.0, 410.4, 413.0, ASME A M (R04) * Stainless Steel Plumbing Fixtures (Designed for Residential Use) Fixtures ASME A M-94 (R04) * Porcelain-Enameled Formed Steel Plumbing Fixtures (Supplement ) Fixtures 401.1, 411.5, 411.6, 411.7, ASME A Trim for Water-Closet Bowls, Tanks, and Urinals Fixtures ASME A M * Whirlpool Hydromassage Bathtub Appliances Fixtures 401.1, ASME A M-87 (R96)(R05) * Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, Hot Tubs, and Whirlpool Bathtub Appliances Swimming Pools and Spas

7 ASME A M-91 (R02) * Non-Vitreous Ceramic Plumbing Fixtures Fixtures 401.1, 408, 410.4, ASME A * Dual Flush Devices for Water Closets Fixtures ASME A * Wall Mounted and Pedestal Mounted Adjustable Elevating, Tilting and Pivoting Lavatory, and Sink and Shampoo Bowl Carrier Systems and Drainage Waste Systems Fixtures 401.1, ASME A * Electrohydraulic Water Closets Fixtures 401.1, 408.0, ASME A * Six-Liter Water Closets Equipped with a Dual Flushing Device Fixtures 410.1, 401.1, ASME A * Bathtub/Whirlpool Bathtubs with Pressure Sealed Doors Fixtures ASME A Qualification of Installers of High Purity Piping Systems Certification ASME A Qualification of Installers of Firestop Systems and Devices for Piping Systems Certification ASME A M-85 (R01) * Hydrants for Utility and Maintenance Use (Note 1) Valves

8 ASME A M-91 (R02) * Cleanouts (Note 1) DWV Components ASME B (R01 R06) * Pipe Threads, General Purpose, Inch Joints (2), , (A) ASME B (R03) * Dryseal Pipe Threads, Inch Joints ASME B Cast Iron Pipe Flanges and Flanged Fittings (Classes 25, 125, 250) and 800 Piping, Ferrous Table 6-4, 604.5, , , (5) ASME B * Malleable-Iron Threaded Fittings Classes 150 and 300 Piping, Ferrous 311.8, Table 6-4, 604.1, 604.6, Table 7-1, 701.2, , , (2) ASME B Gray Iron Threaded Fittings, Classes 125 and 250 (Includes Revision Services) Piping, Ferrous 311.8, 604.5, 604.1,Table 6-4, 604.1, (2) ASME B Pipe Flanges and Flanged Fittings: NPS 1/2 through 24 Joints ASME B (R06) * Cast Iron Threaded Drainage Fittings (Note 1) Piping, Ferrous 311.8, Table 7-1, ASME B (R04) * Cast Bronze Threaded Fittings, Classes 125 and 250 Piping, Copper Alloy 311.8, , Table 6-4,

9 ASME B Cast Copper Alloy Solder Joint Pressure Fittings (Note 1) Piping, Copper Alloy , Table 6-4, ASME B * Standard for ring-joint gaskets and grooves for steel pipe flanges Metallic Gaskets For Pipe Flanges: Ring Joint Spiral Wound And Jacketed Table 6-4, , , ASME B * Nonmetallic Flat Gaskets for Pipe Flanges Joints , ASME B (R05) * Wrought Copper and Copper Alloy Solder Joint Pressure Fittings Alloy Piping, Copper Alloy , Table 6-4, 604.1, , , ASME B * Cast Copper Alloy Solder Joint Drainage Fittings DWV Piping, Copper Alloy , Table 7-1, 701.2, , ASME B * Cast Copper Alloy Pipe Flanges and Flanged Fittings: Classes 150,300, 400, 600, 900, 1500 and 2500 Piping, Copper Alloy Table 6-4, 604.1, , ASME B * Cast Copper Alloy Fittings for Flared Copper Tubes Piping, Copper Alloy , Table 6-4, 604.1, ASME B * Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings DWV Alloy (Note 1) Piping, Copper Alloy , Table 7-1, 701.2, ASME B * Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig (Sizes NPS 1/2 - NPS 24) Valves

10 ASME B * Valves Flanged, Threaded, and Welding End Valves ASME B * Pipe Unions, Malleable Iron Threaded Pipe Unions (Classes 150, 250 and 300) (Includes Revision Services) Piping, Ferrous (4) ASME B * Manually Operated Thermoplastic Gas Shutoff and Valves in Gas Distribution Systems Fuel Gas , ASME B Large Diameter Steel Flanges Piping, Ferrous ASME B * Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings Piping, Copper Alloy Table 6-4, ASME B Power Piping Piping ASME B36.10M-2004 * Welded and Seamless Wrought Steel Pipe Piping, Ferrous ASME B36.19M * Stainless Steel Pipe Piping, Ferrous ASME Section IV Rules for Construction of Heating Boilers Miscellaneous

11 ASME Section VIII Rules for Construction of Pressure Vessels Miscellaneous (2), ASME Section IX Welding and Brazing Procedures, Welders, Braziers, and Welding and Brazing Operators Qualifications Certification , 506.4, , ASSE * Atmospheric-Type Vacuum Breakers Backflow Protection Table 6-2, 603.1, , , , , , ASSE Anti-Siphon Fill Valves (Ballcocks) for Gravity Water Closet Flush Tank Backflow Protection Table 6-2, 603.1, ASSE * Water Pressure Reducing Valves Valves ASSE Backflow Prevention Requirements for Commercial Dishwashing Machines Backflow Protection , , , ASSE Water Heater Drain Valves (Withdrawn) Valves ASSE Residential Use Dishwashers Appliances , , ASSE Home Laundry Equipment Appliances ,

12 ASSE * Plumbing Aspects of Food Waste Disposer Units Appliances , , ASSE Commercial Food Waste Grinder Units Appliances , ASSE * Water Hammer Arresters Piping , ASSE * Hose-Connection Vacuum Breakers Backflow Protection 603.1, ASSE * Backflow Prevention with Intermediate Atmospheric Vent Backflow Protection ASSE * Reduced Pressure Principle Backflow Preventers and Reduced Pressure Fire Protection Principle Backflow Preventers Backflow Protection Table 6-2, 603.1, , , , , , , , , ASSE * Backflow Prevention Devices for Hand-Held Showers Backflow Pretection ASSE * Double-Check Backflow Prevention Assemblies and Double Check Fire Protection Backflow Prevention Assemblies Backflow Protection Table 6-2, 603.1, , , , ASSE * Automatic Compensating Valves for Individual Showers and Tub/Shower Combinations Valves

13 ASSE * Temperature Actuated Mixing Valves for Hot Water Distribution Systems Valves ASSE * Trap Seal Primer Valves-Potable Water Supplied Valves ASSE * Vacuum Breaker Wall Hydrant, Freeze-Resistant Automatic Draining Type Backflow Protection Table 6-2, ASSE * Pressure Vacuum Breaker Assembly Backflow Protection Table 6-2, , , , , ASSE Drains Air Gaps for Domestic Dishwasher Applications Backflow Protection ASSE * Backflow Preventer for Beverage Dispensing Equipment Backflow Protection Table 6-2, ASSE Hot Water Dispensers, Household Storage Type-Electrical Appliances ASSE * Dual Check Valve Backflow Preventers Backflow Prevention ASSE Diverters for Plumbing Faucets with Hose Spray, Anti-Siphon Type, Residential Applications (Deleted no longer in publication) Valves 12

14 ASSE Dual Check Valve Type Backflow Preventers for Carbonated Beverage Dispensers Post Mix Types Backflow Protection ASSE * Laboratory Faucet Backflow Preventers Backflow Protection ASSE Pressurized Flushing Devices (Flushometers) for Plumbing Fixtures Backflow Protection ASSE * Trap Seal Primer Devices-Drainage Types and Electronic Design Types DWV Components ASSE * Reduced Pressure Detector Fire Protection Backflow Prevention Assemblies Backflow Protection Table 6-2, , , ASSE * Double Check Detector Fire Protection Backflow Prevention Assemblies Backflow Protection Table 6-2, ASSE * Hose Connection Backflow Preventers Backflow Protection ASSE Chemical Dispensing Systems Backflow Protection ASSE * Spill Resistant Vacuum Breakers Backflow Protection Table 6-2, , , ,

15 ASSE * Temperature Actuated Flow Reduction (TAFR) Valves for Individual Fixture Fittings Valves ASSE Individual Pressure Balancing In-Line Valves for Individual Fixture Fittings (Note 9) Valves ASSE * Automatic Temperature Control Mixing Valves Valves ASSE * Water Temperature Limiting Devices Valves 413.1, ASSE Series * Professional Qualification Standard for Backflow Prevention Assemblies Testers, Repairers, and Surveyors Certification 603.1, ASSE * Professional Qualifications Standard for Medical Gas Systems Installers, Inspectors, and Verifiers, Maintenance Personnel and Instructors Certification AHAM ASSE DW-2PR-92 Plumbing Requirements for Household Dishwashers Appliances Table 7-3, AHAM ASSE FWD-2 PR-89 Household Food Waste Disposer Units Appliances 401.1, ASTM A (R04) Ferritic Malleable Iron Castings Piping, Ferrous

16 ASTM A Gray Iron Castings Piping, Ferrous ASTM A a Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded, and Seamless Piping, Ferrous Table 6-4, 604.1, ASTM A Cast-Iron Soil Pipe and Fittings (Note 1) Piping, Ferrous Table 7-1, 701.1, 701.2, 807.3, 903.1, , , , , ASTM A Gray Iron Castings for Valves, Flanges, and Pipe Fittings Piping, Ferrous 311.8, , ASTM A 197M-2000 (R06) Cupola Malleable Iron (Metric) Piping, Ferrous 311.8, , ASTM A Seamless and Welded Austenitic Stainless Steel Tubing for General Service Piping, Ferrous ASTM A 312M-2004b 2006 Seamless, Welded and Heavy Cold Worked Austenitic Stainless Steel Pipes Piping, Ferrous ASTM A Ductile-Iron Pressure Pipe Piping, Ferrous ASTM A 479M a Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels Piping, Ferrous

17 ASTM A (R03) Corrosion-Resistant High-Silicon Iron Castings Piping, Ferrous ASTM A (R04) Ductile Iron Castings Piping, Ferrous ASTM A 653M-2004a 2006 Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process Piping, Ferrous 313.8, , , 906.1, ASTM A Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples Piping, Ferrous ASTM A High-Silicon Iron Pipe and Fittings (Note 1) Piping, Ferrous 811.1, ASTM A a 2007 Hubless Cast-Iron Soil Pipe and Fittings for Sanitary and Storm Drain Waste and Vent Piping Applications Piping, Ferrous Table 7-1, 701.1, 701.2, 807.3, 903.1, 903.3, , , ASTM B Refined Lead Joints 701.3, , 906.6, 313.8, 401.2, 411.8, , ASTM B Solder Metal (Note 4) Joints , ASTM B e1 Seamless Copper Pipe, Standard Sizes Piping, Copper Alloy Table 6-4, 604.1, ,

18 ASTM B 43-98(R04) Seamless Red Brass Pipe, Standard Sizes Piping, Copper Alloy Table 6-4, 604.1, Table 7-1, 701.1, , ASTM B Seamless Copper Tube Piping, Copper Alloy Table 6-4, 604.1, 701.1, , , ASTM B Seamless Copper Water Tube Piping, Copper Alloy Table 6-4, 604.1, , , , , ASTM B Seamless Brass Tube (Metric) Piping, Copper Alloy 301.2, Table 6-4, ASTM B 152M a Copper Sheet, Strip, Plate, and Rolled Bar Miscellaneous ASTM B e1 General Requirements for Wrought Seamless Copper Copper-Alloy Tube Piping, Copper Alloy 302.0, 316.1, Table 6-4, 604.1, Table 7-1, 701.1, , ASTM B Seamless Copper Tube for Air Conditioning and Refrigeration Field Service Piping, Copper Alloy , , ASTM B Threadless Copper Pipe, Standard Sizes Piping, Copper Alloy 301.2, Table 6-4, 604.1, Table 7-1, ASTM B Copper Drainage Tube (DWV) Piping, Copper Alloy

19 ASTM B Copper Sheet and Strip for Building Construction Miscellaneous ASTM B Welded Copper Tube Piping, Copper Alloy 301.2, Table 6-4, ASTM B a Copper Alloy Sand Casting for General Applications (Note 5) Piping, Copper Alloy , , , ASTM B e1 (R03) 2006 Welded Brass Tube Piping, Copper Alloy ASTM B (R05)e1 Brass, Copper, and Chromium-Plated Pipe Nipples Piping, Copper Alloy ASTM B e1 Liquid and Paste Fluxes for Soldering Applications of Copper and Copper Alloy Tube Joints ASTM B (R06) Seamless Copper Tube for Medical Gas Systems Piping, Copper Alloy , , ASTM B Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings Joints ASTM C a Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe Piping, Non- Metallic Table 7-1, 701.1,

20 ASTM C (R04)e1 Asbestos-Cement Pressure Pipe Piping, Non- Metallic Table 6-4, ASTM C a Concrete Drain Tile Piping, Non- Metallic ASTM C Compression Joints for Vitrified Clay Pipe and Fittings Joints ASTM C (R02) e1 2005(R06) Asbestos-Cement Nonpressure Sewer Pipe (Notes 6 and 7) Piping, Non- Metallic Table 7-1, 701.1, , 715.0, ASTM C a Joints for Circular Concrete Sewer and Culvert Pipe and Manholes, Using Rubber Gaskets Joints ASTM C a 2006a Precast Reinforced Concrete Manhole Miscellaneous ASTM C a Rubber Gaskets for Cast-Iron Soil Pipe and Fittings Joints ASTM C Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated Piping, Non- Metallic Table 7-1, 701.1, 701.2, ASTM C (R05) Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications (Note 1) Piping, Non- Metallic

21 ASTM C Flexible Transition Couplings for Underground Piping Systems Joints , ASTM C Shielded Couplings Joining Hubless Cast-Iron Soil Pipe and Fittings Piping, Ferrous Joints , ASTM C Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems Piping, Plastic Joints , ASTM C Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground Piping, Plastic Joints , ASTM C Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV); Sewer; Sanitary; and Storm Piping, Plastic Joints , , , , Plumbing Systems for Above and Below Ground Use ASTM C Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings Joints , ASTM D e1 (R05) * Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Sch. 40 and 80 Piping, Plastic Table 3-2, , ASTM D Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds Piping, Plastic Miscellaneous ASTM D a 2006 * Poly (Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 Piping, Plastic Table 3-2, Table 6-4, 604.1, Table 7-1, 701.1, 903.1, , ,

22 ASTM D (R00) (R05) Rubber O-rings for Asbestos-Cement Pipe Joints ASTM D * Polyethylene (PE) Plastic Pipe, Sch. 40 Piping, Plastic ASTM D * Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings Joints ASTM D * Polyethylene (PE) Plastic Pipe, (SDR-PR) Based on Controlled Inside Diameter Piping, Plastic 604.1, Table 6-4 ASTM D b 2005 * Poly(Vinyl Chloride)(PVC) Pressure-Rated Pipe (SDR Series) Piping, Plastic 604.1, Table 6-4 ASTM D e1 (R05) * Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR) Piping, Plastic ASTM D * Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications Piping, Plastic ASTM D * Polyethylene (PE) Plastic Pipe, Sch. 40 and 80 (Based on Controlled Outside Diameter) Piping, Plastic ASTM D e * Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Sch. 80 (Note 1) Piping, Plastic Table 6-4,

23 ASTM D * Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Sch. 40 (Note 1) Piping, Plastic Table 6-4, ASTM D e * Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Sch, 80 (Note 1) Piping, Plastic Table 6-4, ASTM D a 2006a * Thermoplastic Gas Pressure Pipe Tubing and Fittings (Note 1) Piping, Plastic , , , (B), ASTM D e * Reinforced Epoxy Resin Gas Pressure Pipe and Fittings Piping, Plastic ASTM D e1 * Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems Joints , Table 6-4, ASTM D * Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe (Note 1) Piping, Plastic Table 6-4, ASTM D * Practice for Heating Fusion Joining of Polyolefin Pipe Fittings (Note 1) Joints ASTM D * Acrylonitrile-Butadiene-Styrene (ABS) Sch. 40 Plastic Drain, Waste, and Vent Pipe and Fittings (Note 1) Piping, Plastic Table 7-1, 701.1, 701.2, , 707.1, 903.1, 903.3, ASTM D a (e2) * Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings (Note 1) Piping, Plastic Table 7-1, 701.1, 701.2, , 707.1, 903.1, 903.3, , 22

24 ASTM D a (R03) * Joints for IPS PVC Pipe Using Solvent Cement Joints ASTM D * Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping Piping, Plastic Table 7-1, 701.1, , 715.0, ASTM D * Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings (Note 1) Piping, Plastic , ASTM D * Polyethylene (PE) Plastic Tubing Piping, Plastic Table 6-4, ASTM D a 2005 * Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Note 1) Piping, Plastic , ASTM D e * Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Piping, Plastic , Table 6-4, Distribution Systems ASTM D (R02) * Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings Joints ASTM D * Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Piping, Plastic ASTM D a 2006 * Type PSM Poly (Vinyl Chloride) (PVC) Sewer Pipe and Fittings Piping, Plastic , 715.0,

25 ASTM D a * Polyethylene (PE) Plastic Pipe (DR-PR) (Based on Controlled Outside Diameter) Piping, Plastic Table 6-4, ASTM D (R02) * Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings Joints ASTM D * Solvent Cements for Transition Joints, Acrylonitrile-Butadiene- Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Non-Pressure Piping Components Joints ASTM D (R05) * Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals Joints ASTM D a (R03) e1 * Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals Joints ASTM D e * Drain, Waste, and Vent (DWV) Plastic Fittings Patterns (Note 1) Piping, Plastic ASTM D * Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings Piping, Plastic Miscellaneous 311.8, , , 701.1, , 701.2, , , 707.1, 903.1, , 903.3, , , , ASTM D * Chlorinated Polyethylene (CPE) Sheeting for Concealed Water- Containment Membrane Fixtures 411.8(2) ASTM D a 2006a * Propylene Plastic Polypropylene Injection and Extrusion Materials Miscellaneous 811.1,

26 ASTM D (R01) * Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water- Containment Membrane Fixtures 411.5, ASTM D (R03) Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off Fixtures , ASTM E Surface Burning Characteristics of Building Materials Miscellaneous , , ASTM E a 2005a Fire Tests of Building Construction and Materials Miscellaneous 301.2, 301.4, 502.6, , , , ASTM E Fire Tests of Through-Penetration Fire Stops Miscellaneous 313.7, , , , , , , , ASTM F (R99) 2005 * Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings Joints ASTM F * Corrugated Polyethylene (PE) Tubing Pipe and Fittings Piping, Plastic ASTM F * Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings (Note 1) Piping, Plastic 1003 ASTM F * Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Sch. 80 Piping, Plastic Table 6-4,

27 ASTM F * Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Sch. 40 Piping, Plastic ASTM F e * Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Sch. 80 Piping, Plastic Table 6-4, ASTM F * Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Sch. 40 and 80 Piping, Plastic Table 6-4, ASTM F (R05) * Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR) Piping, Plastic ASTM F b * Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR) Schedule 40 and Schedule 80 Piping, Plastic ASTM F * Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings Joints ASTM F * Acrylonitrile-Butadiene-Styrene (ABS) Sch. 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core, (Note 1) Piping, Plastic Table 7-1, 701.1, 701.2, , 707.1, 903.1, 903.3, ASTM F * Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings Joints ASTM F * Large Diameter Corrugated Polyethylene Tubing Pipe and Fittings Piping, Plastic

28 ASTM F * Polyethylene (PE) Plastic Pipe (SDR-PR) (Based on Outside Diameter) Piping, Plastic 715 ASTM F Type PS-46 and Type PS-115 Poly (Vinyl Chloride) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings (Note 1) Officially withdrawn no Piping, Plastic replacement ASTM F * Poly (Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter Piping, Plastic Table 7-1, 701.1, 701.2, , 715.0, ASTM F * Smooth wall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields Piping, Plastic ASTM F a 2005 * Cross linked Polyethylene (PEX) Tubing Piping, Plastic Table 6-4, 604.1, ASTM F a 2005 * Cross linked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems Piping, Plastic Table 6-4, ASTM F * Co extruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core Piping, Plastic Table 7-1, 701.1, , 707.1, 903.1, 903.3, ASTM F a 2005 * Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe Piping, Plastic ASTM F a * Poly (Vinyl Chloride) (PVC) Corrugated Sewer Pipe with a Smooth Interior and Fittings Piping, Plastic

29 ASTM F * Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube Piping, Plastic ASTM F * Cross linked Polyethylene/Aluminum/Cross linked Polyethylene (PEX- AL-PEX) Pressure Pipe Piping, Plastic Table 6-4, 604.1, ASTM F * Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Piping, Plastic Table 6-4, 604.1, Pipe ASTM F e1 * Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems Piping, Plastic ASTM F * Performance of Gasketed Mechanical Couplings for Use in Piping Application Joints ASTM F * Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems Piping, Plastic ASTM F (R03) * Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP) Piping, Plastic ASTM F * Metal Insert Fittings with Utilizing Copper Crimp Ring for SDR 9 Cross linked Polyethylene (PEX) Tubing Piping, Plastic Table 6-4, 604.1, ASTM F * Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings, Schedule 40 Piping, Plastic Table 7-1, 701.1, 701.2, , , 903.3,

30 ASTM F e * Plastic Mechanical Fitting for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing Piping, Plastic ASTM F a e * Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing Piping, Plastic ASTM F * Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-Linked Polyethylene (PEX) Tubing Piping, Plastic Table 6-4, 604.1, ASTM F a * Metal Metallic Cold Flare Compression Fittings with Disc Springs for Cross linked Polyethylene (PEX) Tubing Piping, Plastic Table 6-4, 604.1, ASTM F * Special Engineered Fittings or Appurtenances or Valves for Use in Poly(Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems Piping, Plastic 316.0, ASTM F * Factory Assembled Anodeless Riser and Transition Fitting in Polyethylene (PE) and Polymide 11 (PA11) Fuel Gas Distribution Systems Piping, Plastic ASTM F * Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe Piping, Plastic Table 6-4, 604.1, ASTM F Cold-Expansion Fittings With Metal Compression Sleeves for Cross- Linked Polyethylene (PEX) Pipe Piping, Plastic Table 6-4, 604.1, ASTM F e1 Stainless Steel Clamps for Securing SDR9 Cross-Linked Polyethylene (PEX) Tubing to Metal Insert Fittings Joints

31 ASTM F Plastic Insert Fittings Utilizing a Copper Ring for SDR 9 Cross-Linked Polyethylene (PEX) Tubing Joints Table 6-4, 604.1, ASTM F * Flexible Pre-Insulated Piping Piping, Plastic ASTM F * Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR 9 Piping, Plastic Table 6-4, 604.1, ASTM F Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Tubing Piping, Plastic Table 6-4, , AWS A * Specification for Filler Metals for Brazing and Braze Welding Joints AWS B Brazing Procedure and Performance Qualification Certification , AWWA C * Ductile-Iron and Gray-Iron Fittings, 3 in. through 48 in. (75 mm through 1200 mm), for Water and Other Liquids (same as ANSI A21.10-Piping, Ferrous Table 6-4, ) AWWA C * Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings (same as ANSI A ) Piping, Ferrous Joints AWWA C * Ductile-Iron Pipe, Centrifugally Cast, for Water or Other Liquids (same as ANSI A ) Piping, Ferrous 604.1,Table

32 AWWA C * Ductile-Iron Compact Fittings, 3 in. through 24 in. (76 mm through 610 mm) and 54 in. through 64 in. (1400 mm through 1600 mm), for Water Service (same as ANSI A ) Piping, Ferrous Table 6-4, AWWA C * Coal-Tar Protective Coatings and Linings for Steel Water Pipelines, Enameled and Tape Hot Applied Piping Miscelleous AWWA C * Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines Piping, Ferrous Miscelleous AWWA C * Extruded Polyolefin Coatings for the Exterior of Steel Water Pipelines Piping, Ferrous Miscelleous AWWA C * Asbestos-Cement Distribution Pressure Pipe, 4 in. through 16 in. (100 Piping, Non-Metallic Table 6-4, mm through 400 mm) for Water Distribution Systems and Transmission AWWA C * Metal-Seated Service Gate Valves for Water Supply Service Valves AWWA C * Rubber-Seated Butterfly Valves Valves AWWA C * Ball Valves, 6 in. through 48 in. (150 mm through 1200 mm) Valves AWWA C * Double Check Valve Backflow-Prevention Assembly Backflow Protection Table 6-2, ,

33 AWWA C * Reduced-Pressure Principle Backflow-Prevention Assembly Backflow Protection Table 6-2, AWWA C * Grooved- and Shouldered-Type Joints Joints AWWA C * Polyvinyl Chloride (PVC) Pressure Pipe, and Fabricated Fittings 4 in. through 12 in. (100mm through 300mm), for Water Distribution Piping, Plastic Table 6-4, AWWA C * Polyethylene (PE) Pressure Pipe and Tubing, 1/2 in. (13 mm) through 3 in. (76 mm), for Water Service Piping, Plastic Table 6-4, AWWA C * Injection-Molded Polyvinyl Chloride (PVC) Pressure Fittings for Water - 4 in. through 12 in. (100 mm through 300 mm) for Water Distribution Piping, Plastic CGA V Standard for Compressed Gas Cylinder Valve Outlet and Inlet Connection Valves Chapter 13 CGA S Pressure Relief Device Standards-Part 3-Stationary Storage Containers for Compressed Gases Fuel Gas CISPI a 2005 Hubless Cast-Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications (Note 1) Piping, Ferrous Table 7-1, 701.1, 701.2, , 903.1, 903.3, CISPI Couplings for Use in Connection with Hubless Cast-Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications Joints , , 705.6,

34 CSA No U.S. Requirements for Excess Flow Valves Valves CSA A Concrete Pipe and Manhole Piping CSA B General Requirements for Plumbing Fixtures Fixtures 401.1, 402.1, 402.2, 402.3, 411.6, 411.7, 413.0, CSA B Ceramic Plumbing Fixtures Fixtures 401.1, 402.1, 402.2, 402.3, 413.0, 416.0, 410, CSA B Enameled Cast-Iron Plumbing Fixtures Fixtures 401.1, 402.1, CSA B Porcelain-Enamelled Steel Plumbing Fixtures Fixtures 301.1, 401.1, , 402.3, 413.0, 414.0, 402.2, 402.3, 414.4, CSA B Stainless Steel Plumbing Fixtures Fixtures 401.1, 402.1, 402.2, 402.3, 411.6, 411.7, 413.0, 414.0, CSA B Plastic Plumbing Fixtures Fixtures 401.1, 401.2, 402.3, 414.0, CSA B Macerating Systems and Related Components DWV Components 301.1, 406.3,

35 CSA B (R06) Hydromassage Bathtubs Fixtures 414.0, CSA B Glass Lavatories Fixtures 401.1, CSA B (R06) Backflow Preventers and Vacuum Breakers Backflow Protection Table 6-2, 603.1, 603.2, 603.3, CSA B (R06) Vacuum Breakers, Atmospheric Type (AVB) Backflow Protection 401.3, 402.4, 407.8, 410.0, 410.3, 410.4, , 413.0, 415.0, 416.2, Table , 603.2, 603.3, CSA B (R06) Vacuum Breakers, Pressure Type (PVB) Backflow Protection Table 6-2, 603.1, CSA B (R06) Vacuum Breakers, Hose Connection Type (HCVB) Backflow Protection Table 6-2, 603.1, CSA B (R06) Vacuum Breaker, Hose Connection Dual Check Type (HCDVB) Type with Automatic Drainage Feature (HCVB) Backflow Protection Table 6-2, 603.1, CSA B (R06) Backflow Preventers, Reduced Pressure Principle Type (RP) Backflow Protection Table 6-2, , , , , , , , CSA B (R06) Backflow Preventers, Reduced Pressure Principle Type for Fire System (RPF) Backflow Protection Table 6-2,

36 CSA B (R06) Backflow Preventers, Double Check Valve Type (DVCA) Backflow Protection Table 6-2, 603.1, CSA B (R06) Backflow Preventers, Double Check Valve Type for Fire System (DVCAF) Backflow Protection Table 6-2, 603.1, CSA B Vacuum Breakers Preventers, Laboratory Faucet Type (LFVB) Backflow Protection 603.1, CSA B Plumbing Fixtures Valves 407.8, 416.2, 418.0, Table 6-2, , , CSA B Polyethylene (PE) Pipe, Tubing, and Fittings for Cold Water Pressure Services Piping, Plastic Table 6-4, CSA B Cross linked Polyethylene (PEX) Tubing Systems for Pressure Applications Piping, Plastic Table 6-4, 604.1, , CSA B Polyethylene/Aluminum/Polyethylene Composite Pressure-Pipe Systems Piping, Plastic Table 6-4, 604.1, , CSA B Cross linked Polyethylene/Aluminum/Cross linked Polyethylene Composite Pressure-Pipe Systems Piping, Plastic Table 6-4, 604.1, , CSA B Polyolefin Laboratory Drainage Systems Piping, Plastic

37 CSA B242-80(R04) 2005 Groove and Shoulder Type Mechanical Pipe Couplings Fittings 301.1, 301.2, CSA B (R00) Prefabricated Self-Sealing Roof Vent Flashing Fittings 313.8, 906.5, CSA B (R05) Water Pressure Reducing Valves for Domestic Water Supply Systems Valves 608.2, IAS CSA LC CSA 6.26-M99 * Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing (CSST) Fuel Gas Fuel Gas ANSI/CSA LC * Appliance Stands and Drain Pans Miscellaneous CSA G (R06) Corrugated Steel Pipe Products Fittings ANSI CSA Z21.5.1a-2003 b-2005 * Gas Clothes Dryers -Volume I- Type 1 Clothes Dryers Fuel Gas , ANSI CSA Z21.5.2a * Gas Clothes Dryers -Volume 2- Type 2 Clothes Dryers Fuel Gas ANSI CSA Z b * Gas Water Heaters Volume I Storage Water Heaters with Input Ratings of 75,000 Btu per Hour or Less (22 kw) Appliances

38 ANSI CSA Z * Gas Water Heaters Volume III, Storage, with Input Ratings Above 75,000 BTu per Hour, Circulating and Instantaneous Water Heaters Appliances ANSI CSA Z21.12b-94 * Draft Hoods Appliances ANSI CSA Z21.13a * Gas-Fired Low-Pressure Steam and Hot-Water Boilers Appliances ANSI CSA Z21.15a (R03) * Manually Operated Gas Valves for Appliances, Appliance Connector, Valves, and Hose End Valves Valves , ANSI CSA Z21.22b * Relief Valves for Hot-Water Supply Systems Valves 608.4, ANSI CSA Z21.24b * Connectors for Gas Appliances Appliances (3) ANSI CSA Z21.41b * CSA 6.9A Quick-Disconnect Devices for Use with Gas Fuel Appliances Joints ANSI CSA Z21.47b * Gas-Fired Central Furnaces Fuel Gas 501 ANSI CSA Z CSA * Gas-Fired Pool Heaters Swimming Pools and Spas USPC 37

39 ANSI CSA Z21.69a-2003 CSA * Connectors for Movable Gas Appliances Appliances (6) ANSI CSA Z21.80a * CSA 6.22a-M Line Pressure Regulators Fuel Gas (A,1), ANSI CSA Z * CSA 6.25-M Cylinder Connection Devices Fuel Gas ( C ) (1) ANSI CSA Z21.86a CSA 2.32a * Vented Gas-Fired Space-Heating Appliances Appliances 501 ANSI CSA Z * Certification Third Party Certification Programs for Products Processes, and Services (Discontinued) Certification ANSI CSA Z83.11b * Gas Food Service Equipment Fuel Gas 501 ANSI IAPMO Z * Plastic Bathtub and Shower Units Fixtures 401.1, ANSI IAPMO Z Plastic Shower Units Discontinued Fixtures ANSI IAPMO Z * Plastic Lavatories Fixtures

40 ANSI IAPMO Z * Plastic Water Closet Bowls and Tanks Fixtures 401.1, ANSI IAPMO Z * Plastic Toilet (Water Closet) Seats Fixtures ANSI IAPMO Z * Plastic Sinks Fixtures ANSI IAPMO Z * Prefabricated Plastic Spa Shells Fixtures 401.1, ANSI IAPMO Z * Plastic Bathtub Liners Fixtures 401.1, IAPMO/ANSI Z * Plastic Urinal Fixtures (Note 1) Fixtures IAPMO PS a Prefabricated Septic Tanks DWV Components Appendix K (N) IAPMO PS Drains for Prefabricated and Precast Showers (This standard has been discontinued) Fixtures IAPMO PS Flexible Metallic Field Fabricated Water Connectors (This standard has been discontinued) Piping 39

41 IAPMO PS Sub drains for Built-Up Shower Pans (This standard has been discontinued) Fixtures IAPMO PS a Dishwasher Drain Air Gaps Backflow Protection Table 6-2, 603.1, IAPMO PS Metallic Fittings for Joining Polyethylene Pipe for Water Service and Yard Piping Joints Table 6-4 IAPMO PS Flexible PVC Hose for Pools, Hot Tubs, Spas and Jetted Bathtub Piping, Plastic Miscellaneous IAPMO PS Encasement Sleeve for Potable Water Pipe and Tubing Piping IAPMO PS Lead-Free Sealing Compounds for Threaded Joints Joints , IAPMO PS Black Plastic PVC or PE Pressure-Sensitive Corrosion Preventive Tape Piping 313.0, , IAPMO PS Anodeless Transition Riser for Use with PVC Gas Yard Piping (Discontinued) Fuel Gas IAPMO PS Pipe Alignment and Secondary Support Systems Piping 314.2,

42 IAPMO PS Cushioned Bathtubs and Whirlpool Bathtub Appliances Fixtures 401.1, IAPMO PS a Non-Integral Tile Flange Kits Miscellaneous Table 4-1 (Note 10), IAPMO PS Flush Valves with Dual Flush Devices For Water Closets Fixtures 410.1, IAPMO PS Plastic and Metallic Expansion Joints Joints , , IAPMO PS b 2006 Sumps and Sewage Ejector Tanks DWV Components 710.8, IAPMO PS Grooved Mechanical Pipe Couplings and Grooved End Fittings Joints IAPMO PS a 2006 Metallic and Plastic Utility Boxes Miscellaneous IAPMO PS Bath waste Strainer Drains Fixtures IAPMO PS PVC Hydraulically Actuated Diaphragm Type Water Control Valves Valves

43 IAPMO PS Septic Effluent and Waste Water Diverter Valves DWV Components , Appendix K IAPMO PS Sewage Holding Tank Containing Sewage Ejector Pump for Direct- Mounted Water Closet DWV Components IAPMO PS a Fabricated Stainless Steel Security Water Closets or Urinals Fixtures 401.1, 402.1, 402.2, 410.0, IAPMO PS a 2005 Plastic Leaching Chambers DWV Components , Appendix K IAPMO PS Pipe Flashings Piping 313.8, IAPMO PS Air Gap Units for Water Conditioning Equipment Installation Backflow Protection Table 6-2, IAPMO PS Dielectric Waterway Fittings Piping IAPMO PS Early-Closure Replacement Flappers or Early-Closure Replacement Flapper With Mechanical Assemblies Fixtures IAPMO PS a 2006 Plastic Bath waste and Overflow Assemblies with tub filler spout Piping, Plastic

44 IAPMO PS Valves with Atmospheric Vacuum Breakers Valves Table 6-2, IAPMO PS Dental Vacuum Pumps Miscellaneous IAPMO PS Ballcock or Flushometer Valve Tailpiece Trap Primers and Trap Primer Receptors/Adapters DWV Components IAPMO PS Multiport Electronic Trap Primer DWV Components IAPMO PS b 2006 Grease Interceptors and Clarifiers DWV Components IAPMO PS Precast Concrete Seepage Pit Liners and Covers DWV Components Appendix K IAPMO PS Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Fittings Piping, Plastic 811 IAPMO PS Tools for Mechanically Formed Tee Connections in Copper Tubing Piping IAPMO PS Rainwater Diverter Valve for Non-Roofed Area Slabs DWV Components

45 IAPMO PS Diverter and Shutoff Valves for Pool/Spas Valves USPC IAPMO PS Pre-Pressurized Potable Water Tanks Miscellaneous IAPMO PS Soaking and Hydrotherapy (Whirlpool) Bathtubs with Hydraulic Seatlift Fixtures IAPMO PS Elastomeric Test Caps/Cleanout Caps DWV Components IAPMO PS a Plastic Stabilizers for Use with Plastic Closet Bends Piping, Plastic IAPMO PS Heat Exchangers Miscellaneous , , Appendix L IAPMO PS a Water Closet Seats with Spray, Water Closet Seats with Spray and other Devices with Spray for Water Closet Fixtures IAPMO PS a P-Trap, Supply Stop, and Riser Insulated Protector Miscellaneous 313 IAPMO PS Drain, Waste, and Vent Hangers and Plastic Pipe Support Hooks Piping

46 IAPMO PS Passive Direct Solar Water Heaters Miscellaneous USEC IAPMO PS Mechanical Cast-Iron Closet Flanges Piping, Ferrous IAPMO PS Prefabricated Fiberglass Church Baptisteries Fixtures IAPMO PS Terrazzo Marble, Concrete, and Granite Plumbing Fixtures Fixtures IAPMO PS Porous Filter Protector for Sub drain Weep Holes DWV Components IAPMO PS Suction Relief Valves Valves IAPMO PS a Pedestal Lavatory Trap (Discontinued) DWV Components IAPMO PS Pressure Relief Connection for Dispensing Equipment Valves IAPMO PS Polyethylene Distribution Boxes DWV Components Appendix K 45

47 IAPMO PS Prefabricated, Tileable Shower Receptors Fixtures 411.5, IAPMO PS Aramid-Reinforced Rubber Hose for Use in Non-Potable Water Radiant Piping, Plastic Heating and Snow Melting UMC IAPMO PS Restaurant Fire Suppression Systems Appliances IAPMO PS PVC Cold Water Compression Fittings Fittings Table 6-4, IAPMO PS PVC Cold Water Gripper Fittings Fittings Table 6-4, IAPMO PS PVC Plastic Valves for Cold Water Distribution Systems Outside a Building and CPVC Plastic Valves for Hot and Cold Water Distribution Valves 605 Systems IAPMO PS e1 Hydraulically Powered Household Food Waster Grinders Disposers Appliances IAPMO PS e1 Remote, Floor Box Industrial Water Supply, Air Supply, Drainage Miscellaneous IAPMO PS Hot Water Demand or Automatic Activated Hot Water Pumping Systems Miscellaneous

48 IAPMO PS Hot Water Circulating Devices Which Do Not Use a Pump Miscellaneous IAPMO PS a 2006 Copper and Copper Alloy Fittings with Press-Type or Nail-Type Connections For Installation on Copper Tubing Fittings Table 6-4, IAPMO PS FOG (Fats, Oils, Greases) Disposal Systems Discontinued DWV Components IAPMO PS Water Energized Sump Pump Miscellaneous IAS 1-91 U.S. Requirements for Indirect Water Heaters for Use with External Heat Source (not available) Miscellaneous ANSI ICC A * Accessible and Usable Buildings and Facilities Miscellaneous Table 4-1, 411.7, ISEA Z * Emergency Eyewash and Shower Equipment Miscellaneous ISO Guide General Requirements for Bodies Operating Product Certification Systems Certification MSS SP * Standard Marking System for Valves, Fittings, Flanges, and Unions Piping

49 MSS SP * Class 150 Corrosion-Resistant Gate, Globe, Angle, and Check Valves with Flanged and Butt Weld Ends Piping, Ferrous MSS SP * Steel Pipeline Flanges Piping, Ferrous MSS SP * Pipe Hangers and Supports Materials, Design, and Manufacture Piping , MSS SP a * Butterfly Valves Valves MSS SP * Pipe Hangars and Supports - Selection and Application Piping MSS SP * Cast Gray-Iron Gate Valves, Flanged and Threaded Ends Valves MSS SP * Cast-Iron Swing Check Valves, Flanged and Threaded Ends Valves MSS SP * Ball Valves with Flanged or Butt-Welding Ends for General Service Valves MSS SP * Brazing Joints for Wrought and Cast Copper Alloy Solder Joint Pressure Fittings (Discontinued) Joints 48