PAPER INDUSTRY PROCESS DESCRIPTION

Size: px
Start display at page:

Download "PAPER INDUSTRY PROCESS DESCRIPTION"

Transcription

1 PAPER INDUSTRY PROCESS DESCRIPTION

2 Paper Industry PROCESS DESCRIPTION SUMMARY- PART 1. PAPER PASTE GENERATION 1. Raw material 2. First paper separation 3. Second paper separation 2

3 Paper Industry PROCESS DESCRIPTION SUMMARY- PART 2. PAPER PASTE TREATMENT 1. First homogenizing of paper paste 2. Second homogenizing of paper paste 3. Purifying of paper paste 4. Filtering and rejection of paper paste 5. Fine filtering of paper paste 6. First thickness of paper paste 7. Recovery of fibers 3

4 Paper Industry PROCESS DESCRIPTION SUMMARY- PART 2. PAPER PASTE TREATMENT 8. Refinement of paper paste 9. Grid purifying of paper paste 10. Final homogenizing of paper paste 11. Transferring to the machine headpiece of paper paste 12. Train of aspiration, drying, pressing and reeling of paper 13. Reels cut 4

5 1 Paper Industry: Process Description PAPER PASTE GENERATION PART 1 5

6 Paper Industry Process Description PAPER PASTE GENERATION 1. RAW MATERIAL Raw material is tetra-brick remains basically. This implies a separation process:» On the one hand paper.» On the other hand aluminium and plastic. Raw material cost is almost zero. Aluminium and plastic remains are packed, liberated from water and burned to generate steam that will be used to dry the paper.» Raw material entry» Aluminium and plastics remains accumulated 6

7 Paper Industry Process Description PAPER PASTE GENERATION 2. FIRST PAPER SEPARATION The bales of raw material are transported by transport bands up to the pulpers. Over there water is added and starts the crushing and separation. The grid is about 12mm. The screw and the blades crush and spin, and so starts the milling of material. Then, the added water will be extracted by a suction pump.» Manufacturing paper. Plastic burning» Paper dissolution 7

8 Paper Industry Process Description PAPER PASTE GENERATION 2. FIRST PAPER SEPARATION In this way, first separation is realized, trying not to broke the aluminium. At the end, we managed to empty the system that will be ready again for receiving new bales of material.» Pulper emptying» Pulper empty 8

9 Paper Industry Process Description PAPER PASTE GENERATION 3. SECOND PAPER SEPARATION Remains pass to the trommel from the drainpipe of the pulper, where spin during 5min. (approx) to remove more water. Then, the rotation direction is inverted and transport bands are driven, retiring the remains (alu. and plastics). Drained water is elevated towards a tank by pumps for this purpose.» Drying trommel» Trommel drying out pumps 9

10 2 Paper Industry: Process Description PAPER PASTE TREATMENT PART 2 10

11 Paper Industry Process Description PAPER PASTE TREATMENT 1. FIRST HOMOGENIZING OF PAPER PASTE There are different trommels, but all paper paste is impelled towards two tanks or tubs. The percentage of paper in this paste is about 3g/litre. It is very liquid. A pump system at the input of the tanks allows mixing all received past in the tanks themselves.» Output trommel tank» Impulsing pumps at output trommel 11

12 Paper Industry Process Description PAPER PASTE TREATMENT 2. SECOND HOMOGENIZING OF PAPER PASTE After these two deposits, there is a third cement tank that receives the mixture of the pastes contained in the previous tubs. The process is executed with two pumps at the output of both tanks. It is necessary to take the quality of each paper paste into account to dose the needed amount from each tank, with the purpose that the mixture of the third tank fulfils with the required specifications.» Second homogenizing tank 12

13 Paper Industry Process Description PAPER PASTE TREATMENT 3. PURIFYING OF PAPER PASTE After paste is homogenized, this one is subjected to a filtering or purifying to retire small remains that still are present (staples, food remains, ). This is realized in the centrifuge purifier: the light things are elevated (paper) and the heavy things are deposited (remains).» Centrifuge purifiers 13

14 Paper Industry Process Description PAPER PASTE TREATMENT 4. FILTERING AND REJECTION OF PAPER PASTE From centrifuge purifiers, all of the mixture pass to a level box, thanks to the impulsing realized by a pump. The process goes on from this level box to the cibersorter. In this one a new filtering of present elements is realized, with a grid lower than 1.5mm.» Level box 14

15 Paper Industry Process Description PAPER PASTE TREATMENT 4. FILTERING AND REJECTION OF PAPER PASTE In the cibersorter filtering there is a rejection generated by this grid exactly. This rejection part is recirculated towards the rejectsorter where suffers a low sieve and is sent to the cibersorter again. The rejectsorter manages to separate pieces of paper that are not crushed properly, and plastic remains. All this will be incinerated.» Rejectsorter 15

16 Paper Industry Process Description PAPER PASTE TREATMENT 5. FINE FILTERING OF PAPER PASTE At the cibersorter output, the part of the paste that are not rejected, is impelled to another level box, and from there pass to a finer filtering realized by the cyclonic purifiers or cleaners. In this case, they are 4 different purifiers, with their 4 driving motors.» Cyclonic purifiers 16

17 Paper Industry Process Description PAPER PASTE TREATMENT 6. FIRST THICKNESS OF PAPER PASTE From the cleaners, the paste pass to the variosplit, where the water starts to get out, and the paste makes thickness. For this, the mixture is sent out through different spurts (linear shower) over a cloth or felt. The cloth is moved by a rollers (approx. speed 400m/min). The water fog corresponds with the area where the linear shower is expelled over the cloth.» Variosplit» Variosplit detail 17

18 Paper Industry Process Description PAPER PASTE TREATMENT 7. RECOVERY OF FIBERS The water picked up in the variosplit goes to the purifier of the plant and there follows the normal process of primary and secondary decantation. Before that, this water suffers a process of fibers recovery and overturning inside a deposit. For this, a system of three pumps is used: one pump injects the water at constant speed, other pump controls the level of the output tank and the last one is used as a spare. The paste is picked up in other tank. From this one, the paste will pass to the following stage.» Variosplit sprinkler» Tank previous to the refinement 18

19 Paper Industry Process Description PAPER PASTE TREATMENT 8. REFINEMENT OF PAPER PASTE The paste pass to a refinement stage. This stage tries to break the film that involves the paste which will make difficult its later framework in the table. Blowing up this film, micro fibers that will link better are generated. For this, it is used a machine consisted of discs that put the proper pressure. The motor of this machine is controlled by current signal, since its rating is about 600kW.» Refinement» Refinement motor 19

20 Paper Industry Process Description PAPER PASTE TREATMENT 9. GRID PURIFYING OF PAPER PASTE After the refinement output, the paste suffers a new purification process called grid purifying. In this purifiers there is an internal cylinder sleeve with grids (size lower than 0.2mm) and a propeller that producing the movement by forcing the material to pass and separating the remains.» Grid purifying 20

21 Paper Industry Process Description PAPER PASTE TREATMENT 10. FINAL HOMOGENIZING OF PAPER PASTE At the output of the previous stage, there are two tanks where a new homogenizing of the paste is realized. To do that, there are two agitators and a transferring pump before passing to the grammage pump. The paste is agitated and transferred from a deposit to the another one to obtain the proper consistency. Finally, the paste will pass to the pump that will define the grammage for the paper finishing (higher or lower thickness).» Tanks at machine headpiece 21

22 Paper Industry Process Description PAPER PASTE TREATMENT 11. TRANSFERRING TO THE MACHINE HEADPIECE OF PAPER PASTE Before seeing the paper paste again over the final table, a dilution process is produced. This is produced in the centrifuge purifier called giroclean. For this, two pumps are used:» Pump of first dilution: receives the material from the grammage pump.» Pump of second dilution: sends the material from the giroclean up to the distribution box.» Distribution box» Paper forming 22

23 Paper Industry Process Description PAPER PASTE TREATMENT 11. TRANSFERRING TO THE MACHINE HEADPIECE OF PAPER PASTE In the distribution box the paste goes out through a grid of 12cm approx. The overturning of the paste is controlled according to the speed of the drop by drop dried out cloth. In this way, the amount of paste is dosed according to the paper gammage. Thanks to the cloth properties, water of the paste is dried out drop by drop and at the end of the way it will be already dry.» Distribution box 23

24 Paper Industry Process Description PAPER PASTE TREATMENT 12. TRAIN OF ASPIRATION, DRYING, PRESSING AND REELING OF PAPER From this point, there is a train consisted of 13 rollers with their corresponding motors. All of the motors are driven by speed and follows a pre-defined reference. Then, there are two vacuum systems to aspirate the water of the paper and the felts. After that, there is a pressing area to remove more water to the paper and also there is a steam-dried area before reeling the dry paper.» Rollers train 01» Rollers train 02 24

25 Paper Industry Process Description PAPER PASTE TREATMENT 12. TRAIN OF ASPIRATION, DRYING, PRESSING AND REELING OF PAPER The low vacuum allows removing water to the felts when passing the table, through the aspiration boxes. The high vacuum actuates through the rest of cylinders that are hollow and perforated. As cylinders press, the water comes into them where is aspirated by the generated vacuum.» Rollers train 01» Aspiration boxes 25

26 Paper Industry Process Description PAPER PASTE TREATMENT 12. TRAIN OF ASPIRATION, DRYING, PRESSING AND REELING OF PAPER After this, it arrives the steam-dried area. When burning the plastic, it is used to generate energy and steam that is driven here and distributed for the ventilation motors of this part of the machine in an uniform way.» Rollers train 01» Aspiration boxes 26

27 Paper Industry Process Description PAPER PASTE TREATMENT 12. TRAIN OF ASPIRATION, DRYING, PRESSING AND REELING OF PAPER When process is finished, the paper is ready to be reeled by the last roller or Pope. There is a mechanism that allows putting and fixing an empty shaft, an adhesive strip is thrown from one extreme to the other. This strip cuts the paper sheet and hooks the cut paper at the same time. In this way, that roller downs and the reeling goes on over a new shaft. Then, the previous reel can be already retired.» Rollers train output» Paper finished 27

28 Paper Industry Process Description PAPER PASTE TREATMENT 13. REELS CUT Once retired the reel, this one suffers a customized process. There is an auxiliary table with several blades and grid cylinders that allow unreeling the paper and cutting it to generate new reels with a required width for each case. See manufacturers.» Reels treatment 28

29 3 Criteria of use for Power Electronics Devices VARIABLE SPEED DRIVES & SOFTSTARTERS 29

30 Paper Industry CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 30

31 Paper Industry Part 1 : Paper Paste Generation CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 1. ACTUATORS FOR RAW MATERIAL» INPUT TRANSPORT BANDS: Softstarter or Variable Speed Drive» Ratings oscillate around kW approximately Recommended equipments:» V5 Series Frame 1» SD250 Series» SD450 Series [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] Allows continuous operating according to the production requirements avoiding unnecessary startings and stoppings. Speed control. Manufacturing optimization. 31

32 Paper Industry Part 1 : Paper Paste Generation CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 2. ACTUATORS FOR FIRST PAPER SEPARATION» PULPER SCREW ( kW approx.): Variable Speed Drive Recommended equipments:» SD700 Series Frame 6» SUCTION PUMPS (55kW approx.): Softstarter Recommended equipments:» V5 Series Frame 2 [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] While milling process is realized in the pulper, we operates at lower speed (for example, 40Hz), with the objective that aluminum (recycling) is not broken. When this process is finished (elapsed time depends on the pulper capacity, groups of 1800kg of dry paper usually), speed is increased (for example, 50Hz) to start the vacuum process that is interesting to do it faster. Without variable speed drive is not possible to regulate several operating speeds. 32

33 Paper Industry Part 1 : Paper Paste Generation CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 3. ACTUATORS FOR SECOND PAPER SEPARATION» INPUT TRANSPORT BANDS: Softstarter or Variable Speed Drive» Ratings oscillate around kW approximately Recommended equipments:» V5 Series Frame 1» SD250 Series» SD450 Series [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] Allows continuous operating according to the production requirements avoiding unnecessary startings and stoppings. Speed control. Manufacturing optimization. 33

34 Paper Industry Part 1 : Paper Paste Generation CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 3. ACTUATORS FOR SECOND PAPER SEPARATION» TROMMEL (30kW approx.): Softstarter or Variable Speed Drive» ELEVATION PUMPS (22.5kW approx.): Softstarter or Variable Speed Drive Recommended equipments:» V5 Series Frame 1» SD450 Series [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] In the trommel there is a hydraulic system that allows the regulation in the same way that the softstarter protects and drives the motor correctly. Using the proper variable speed drive, long life of specific mechanical components (reducer, ) will be extended. Regarding to the elevation, the variable speed drive will achieve a system optimization again, and allows saving the 8-9 startings per hour suffered by those motors now. Additionally, it allows closing the loop with the level detector of the tank that receives impelled water to keep it full, but avoiding overflows. (See photos). 34

35 Paper Industry Part 2 : Paper Paste Treatment CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 1. ACTUATORS FOR FIRST HOMOGENIZING OF PAPER PASTE» TWO PUMPS FOR AGITATORS (15kW approx.): Softstarter or Variable Speed Drive Recommended equipments:» V5 Series Frame 1» SD450 Series [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] The qualities of the trommels are different and the collection is centered in two tanks. For this, it is necessary to homogenize the paste, so that both tanks contain paste with the same characteristics. Two first pumps agitate the mixture at constant speed. For this reason, softstarters are proper, always considering that a variable speed drive regulates the speed according to the amounts that are received. 35

36 Paper Industry Part 2 : Paper Paste Treatment CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 2. ACTUATORS FOR SECOND HOMOGENIZING OF PAPER PASTE» TWO HOMOGENIZING PUMPS (55kW approx.): Softstarter or Variable Speed Drive Recommended equipments:» V5 Series Frame 2» SD450 Series» SD700 Series (low power) [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] The mixture has been agitated by two first motors, The pumps which control the homogenizing process, but now, it is necessary to mixture the content of control the flows that are sent from the trommels with they both. For this, the flow is controlled and by this purpose exactly. setting the desired percentages it manages to Variable speed drives allows closing a control overturn the needed amounts to the third tank. loop that manages to do this. Otherwise, it is Each variable speed drive receives the not possible. overturning reference (65% + 35%, for Additionally, it is possible to control the level of example) and this one becomes its speed the third tank. 36 reference.

37 Paper Industry Part 2 : Paper Paste Treatment CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 3. ACTUATORS FOR PURIFYING OF PAPER PASTE» TWO IMPULSING PUMPS: Softstarter» Ratings oscillate around 30kW approximately Recommended equipments:» V5 Series Frame 1 [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] Paper paste is impelled at constant speed; pipes and purifiers shape realize the rest, achieving sedimentation of the first smallsized remains. 37

38 Paper Industry Part 2 : Paper Paste Treatment CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 4. ACTUATORS FOR FILTERING AND REJECTION OF PAPER PASTE» CIBERSORTER (75kW approx.): Softstarter or Variable Speed Drive» REJECTSORTER (55kW approx.): Softstarter or Variable Speed Drive Recommended equipments:» V5 Series Frame 2» SD450 Series» SD700 Series Frame 4 [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] As in previous stage the pasted is being impelled at constant speed, softstarters continues with the process. The use of variable speed drive allows a speed control with the consequent energy saving. 38

39 5. ACTUATORS FOR FINE FILTERING OF PAPER PASTE» CLEANER PUMP 1 (90kW approx.): Variable Speed Drive» CLEANER PUMP 2 (55kW approx.): Variable Speed Drive» CLEANER PUMP 3 (22kW approx.): Variable Speed Drive» CLEANER PUMP 4 (15kW approx.): Variable Speed Drive Recommended equipments:» SD450 Series» SD700 Series Frame 4 Paper Industry Part 2 : Paper Paste Treatment CRITERIA OF USE FOR POWER ELECTRONICS DEVICES [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] For cleaners pumps are always primed y air bags do not enter, there is an auxiliary water tank. This one keeps constant the level and needed water to keep the priming is taken from this tank. In this way, variable speed drives realize a pressure control in closed loop, managing to keep desired reference for each one of them, regulating speed every time. 39

40 Paper Industry Part 2 : Paper Paste Treatment CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 6. ACTUATORS FOR FIRST THICKNESS OF PAPER PASTE» VARIOSPLIT CLOTH MOTOR (75kW approx.): Variable Speed Drive» VARIOSPLIT SPRINKLER MOTOR (15kW approx.): Variable Speed Drive Recommended equipments:» SD450 Series» SD700 Series Frame 4 [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] Motor that moves the cloth is driven through a variable speed drive controlled by encoder, so system always knows the real speed of the motor. The reference (for example, 400m/min) will be kept by the speed control. Thanks to that we can achieve the efficiency of the machine is optimum according to the different types of paper that is being produced. Motor of watering can is also controlled by variable speed drive because the pressure is regulated. So, we achieve that any output hole of the shower is obturated. This would increase the pressure in the free holes and the cloth would be probably broken in the area where the pressure is too high. 40

41 Paper Industry Part 2 : Paper Paste Treatment CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 7. ACTUATORS FOR RECOVERY OF FIBERS» THREE PUMPS FOR WATER RECOVERY (90kW approx.): Softstarter or Variable Speed Drive Recommended equipments:» V5 Series Frame 2» SD700 Series Frame 4» ONE PUMP FOR PASTE RECOVERY (30kW approx.): Softstarter or Variable Speed Drive Recommended equipments:» V5 Series Frame 1» SD450 Series» SD700 Series (low power) [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] The system consists of a couple of operative pumps and other one as a spare. One of them injects water at constant speed. There is not any control and for this reason a started is used. The second one is driven by a variable speed drive. Thanks to this, it can close a control loop with the level of the tub that is being filled, and the speed of this pump changes to avoid overflows. Therefore, this option is applicable to the first pump and so, 41 only the second one suffers.

42 Paper Industry Part 2 : Paper Paste Treatment CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 8. ACTUATORS FOR REFINEMENT OF PAPER PASTE» REFINEMENT MOTOR (600kW approx.): Softstarter Recommended equipments:» V5 Series Frame 5» CONTROL MOTOR (2.5kW approx.): Variable Speed Drive Recommended equipments:» SD450 Series [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] Small motor realizes the approximation of discs. Big motor keeps spinning discs at constant speed. This speed is very near the maximum current consumption. Analogue output proportional to that current is sent from the softstarter up to the drive so that this one actuates over the small motor and allows bringing near more or less the discs, producing a higher or lower refinement. NOTE: Sometimes, the refinement is realized with blades and softstarters. For modifying the refinement type is necessary to replace the blades. If the possibility of mounting a group of blades simultaneously exists, then a drive would allow controlling it without replacing them. 42

43 Paper Industry Part 2 : Paper Paste Treatment CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 9. ACTUATORS FOR GRID PURIFYING OF PAPER PASTE» TWO PURIFIERS (75kW approx.): Softstarter or Variable Speed Drive» ONE PURIFIER (55kW approx.): Softstarter or Variable Speed Drive Recommended equipments:» V5 Series Frame 2» SD450 Series» SD700 Series Frame 4 [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] The use of variable speed drive is recommended to modify the motor speed according to the received paste, with the consequent energy saving. 43

44 Paper Industry Part 2 : Paper Paste Treatment CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 10. ACTUATORS FOR FINAL HOMOGENIZING OF PAPER PASTE» TWO AGITATORS (22kW approx.): Softstarter» TRANSFERRING PUMP (22kW approx.): Softstarter Recommended equipments:» V5 Series Frame 1» GRAMMAGE PUMP (15kW approx.): Variable Speed Drive Recommended equipments:» SD450 Series [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] For the agitators and transferring pump we can use softstarters, since most of the pumpings are realized at constant speed. Nevertheless, the installation of a drive could be a great improvement again, so that these pumps would be controlled by the level signal of machine headpiece tubs. For the grammage pump, the use of a drive is obvious since this one doses continuously the amount of paste according to the grammage that will be had by finished paper. 44

45 Paper Industry Part 2 : Paper Paste Treatment CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 11. ACTUATORS FOR TRANSFERRING TO THE MACHINE HEADPIECE OF PAPER PASTE» FIRST DILUTION PUMP (55kW approx.): Softstarter» CENTRIFUGE PURIFIER (55kW approx.): Softstarter» SECOND DILUTION PUMP (90W approx.): Variable Speed Drive Recommended equipments:» V5 Series Frame 2» SD700 Series Frame 4 [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] Centrifuge purifier has a current peak very high. For this, the use of softstarter is needed to protect the motor. However, if the system clutch is treated properly, it is possible to improve the operation and optimize the current consumption at the startings by installing a drive. Regarding to the second dilution pump, the use of variable speed drive is necessary to be able to control, by motorized potentiometer, the column of the distribution box, this is, it is necessary to keep the pressure constant. 45

46 Recommended equipments:» SD450 Series» SD700 Series Frames 4, 5 and 6 Paper Industry Part 2 : Paper Paste Treatment CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 12. ACTUATORS FOR TRAIN OF ASPIRATION, DRYING, PRESSING AND REELING OF PAPER» TWO MOTORS FOR FELTS (200kW approx.): Variable Speed Drive» ONE MOTOR FOR FELTS (132kW approx.): Variable Speed Drive» TEN MOTORS FOR CYLINDERS (75kW approx.): Variable Speed Drive [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] The entire system must be aligned perfectly, the rollers must be rectified correctly and above all controlled, so that the paper does not bend, or creases, or twists or breaks. This control is realized by the variable speed drives connected to the network and controlled from PLC. So, PLC is able to calculate the needed increments of speed between one roller and the next one to keep tight the paper, but without breaking it. If we consider that as the reel dimensions change, the speed must be adjusted, the process must be conceived as a permanent change of speed, realizing a vector control in closed loop with encoder. 46

47 Paper Industry Part 2 : Paper Paste Treatment CRITERIA OF USE FOR POWER ELECTRONICS DEVICES 12. ACTUATORS FOR TRAIN OF ASPIRATION, DRYING, PRESSING AND REELING OF PAPER» THREE PUMPS FOR LOW VACUUM (132kW approx.): Softstarter or Variable Speed Drive» THREE PUMPS FOR HIGH VACUUM (200kW approx.): Softstarter or Variable Speed Drive» ONE PUMP FOR HIGH VACUUM (75kW approx.): Softstarter or Variable Speed Drive Recommended equipments:» V5 Series Frames 2 and 3» SD450 Series» SD700 Series Frames 4, 5 and 6 [ POWER ELECTRONICS EQUIPMENTS USE JUSTIFICATION ] Control of the motors is realized by softstarters operating at constant mode, nevertheless, if variable speed drives are used, the aspiration speed could be modified according to the humidity, the paper grammage, the amount of the paper, etc 47

48 Thanks for your attention Presentation PAPER INDUSTRY: Process Description Realized Pilar Navarro Organized Marketing Department Power Electronics, S.L.

PAPER MILL MANUFACTURER OF SEVERAL TYPES OF BOARDS AND PACKAGING GRADES

PAPER MILL MANUFACTURER OF SEVERAL TYPES OF BOARDS AND PACKAGING GRADES PAPER MILL MANUFACTURER OF SEVERAL TYPES OF BOARDS AND PACKAGING GRADES The paper mill produces papers and boards made with wood pulp and with recycled fibers. Production includes file folder grades and

More information

TWO PAPER MACHINES 8500mm Reel Width

TWO PAPER MACHINES 8500mm Reel Width TWO PAPER MACHINES 8500mm Reel Width These machines will only be sold for the production of brown grade papers. Mill voltage is 525 volts and incoming voltage is 10,000 volts, 3phase and 50 cycles. Number

More information

Since I started with Fomat in 1973 I have been following these guidelines :

Since I started with Fomat in 1973 I have been following these guidelines : Since I started with Fomat in 1973 I have been following these guidelines : provide only high quality products. provide appropriate technical assistance. understand the needs and problems of the customer.

More information

PART II. THE PRECLEANING OF PADDY

PART II. THE PRECLEANING OF PADDY PART II. THE PRECLEANING OF PADDY Prior to the actual milling operation, the paddy received from the farmer is cleaned in precleaning machines. Foreign matter or impurities are removed to protect the processing

More information

Travaglini EQUIPMENT FOR FERMENTING AND AGING OF SALAMI. Travaglini_inglese.indd 6 05/07/

Travaglini EQUIPMENT FOR FERMENTING AND AGING OF SALAMI. Travaglini_inglese.indd 6 05/07/ Travaglini EQUIPMENT FOR FERMENTING AND AGING OF SALAMI Travaglini_inglese.indd 6 05/07/13 15.22 Since 1950, Travaglini S.p.A. has been the leading company in the manufacturing of drying, smoking, and

More information

since 1975 AWE ARROW HOT SPLICING PRESS 100% ITALIAN PRODUCTION

since 1975 AWE ARROW HOT SPLICING PRESS  100% ITALIAN PRODUCTION AWE ARROW HOT SPLICING PRESS since 1975 www.zparrow.com 100% ITALIAN PRODUCTION since 1975 THE COMPANY was established in 1975 as a designer and manufacturer of variable delivery pumps for the transfer,

More information

Paper Machine N 4, 1530mm Deckle

Paper Machine N 4, 1530mm Deckle Paper Machine N 4, 1530mm Deckle Paper Machine for fine and coloured papers, art and security papers Drive is on the left from flow-box, deckle is 1530 mm, speed 210 m/mn, grammage 70 to 450 gsm and production

More information

BALE BREAKER AND OPENERS

BALE BREAKER AND OPENERS BALE BREAKER AND OPENERS 13 Automatic Bale Plucker is used to mechanically strip fibres from pressed bales and automatically drop the fibre on to the feed table of the opening machinery at the beginning

More information

Industrial Dust Aspiration Solutions. For optimal protection of plant and environment.

Industrial Dust Aspiration Solutions. For optimal protection of plant and environment. Bühler GmbH DE-92339 Beilngries Deutschland T + 49 8461 701 0 F +49 8461 701 133 grain-logistics@buhlergroup.com Buhlergroup.com/grain-logistics GL_CB_Dust_Aspriation_Systems_EN_14004_02 Dust Aspiration

More information

Energy Saving Drives for Hot Strip Mills

Energy Saving Drives for Hot Strip Mills Energy Saving Drives for Hot Strip Mills Ralph PUGH TMEIC 060 Cook Drive Salem, VA 4153, USA Tel: 540-83-158 Fax: 540-83-395 E-mail: ralph.pugh@tmeic.com Serkay ÖZALICI TOSÇELIK Osmaniye OSB Turkey Tel:

More information

HEATING AND VENTILATION

HEATING AND VENTILATION SECTION 14-102.04 14-102.04/ 1 2007OC19 DESCRIPTION The heating, ventilation and air conditioning (HVAC) system is designed to optimize passenger comfort. The system regulates interior vehicle atmosphere,

More information

MIX Type Blenders. I Application. I Principle of operation

MIX Type Blenders. I Application. I Principle of operation MIX Type Blenders MSMIX I Application INOXPA's MIX type blenders have been designed specifically for mixing low or high viscosity liquid products for the food, cosmetics, pharmaceutical and chemical industries.

More information

FINISHER OR PULPING MACHINE

FINISHER OR PULPING MACHINE FINISHER OR PULPING MACHINE APPLICATIONS Finisher is used in the processing of a big variety of products to refine the product in a continuous and efficent way. Some applications are the following ones:

More information

ChE 441: Paper Manufacture

ChE 441: Paper Manufacture ChE 441: Paper Manufacture Lecture # 13 by Kazi Bayzid Kabir Introduction Paper consists of a web of pulp fibers usually formed from an aqueous slurry on a wire or screen, and held together by hydrogen

More information

COMPLETE LINE FOR NON SINTERED PTFE TAPE. 1-Mixing tumbler

COMPLETE LINE FOR NON SINTERED PTFE TAPE. 1-Mixing tumbler COMPLETE LINE FOR NON SINTERED PTFE TAPE 1-Mixing tumbler This machine is used for mixing powders and additives to obtain after a certain amount of time, an amalgamated product with a pasty consistency.

More information

WE LOVE WHAT WE DO. CUBE SYSTEMS SINGLE & MULTIPLE SURGERY

WE LOVE WHAT WE DO. CUBE SYSTEMS SINGLE & MULTIPLE SURGERY WE LOVE WHAT WE DO. CUBE SYSTEMS SINGLE & MULTIPLE SURGERY SMALL, QUIET AND ENERGY EFFICIENT CUBE SYSTEMS ARE ENERGY EFFICIENT AND ALLOW THE USER MORE FLEXIBILITY FOR INSTALLATION Cube suction units are

More information

Recycling Solutions & Turnkey Systems

Recycling Solutions & Turnkey Systems Recycling Solutions & Turnkey Systems SYSTEMS AND SOLUTIONS FOR MSW, C&D, GREENWASTE, SINGLE STREAM, WASTE TO ENERGY, E-SCRAP AND SCRAP METAL System integration and design provided in association with:

More information

Evolution of OptiConcept Entering a

Evolution of OptiConcept Entering a Entering a New Era Executive Summary The OptiConcept launch in 1999 introduced groundbreaking technology in machine efficiency, availability and industrial design all factors that have had a great impact

More information

LUCART LAVAL PM10 paper machine speed up project including doctoring system replacement

LUCART LAVAL PM10 paper machine speed up project including doctoring system replacement 1 LUCART LAVAL PM10 paper machine speed up project including doctoring system replacement Day 3 - Wednesday, 12 April 2017 MORNING SESSION: 8:50 a.m. - 1:20 p.m. 3 LUCART GROUP AT A GLANCE 319,000 Tons

More information

Poly Series. Polymer Preparation Unit

Poly Series. Polymer Preparation Unit Poly Series Polymer Preparation Unit 02 Solutions for Water & Industry Seko s Poly Series has been specifically designed to provide effective solutions to the needs of Water Treatment Customers. The Poly

More information

RONDA 2-58 Duo Heavy Duty Industrial Vacuum Cleaner For Liquid Filtration and Transport

RONDA 2-58 Duo Heavy Duty Industrial Vacuum Cleaner For Liquid Filtration and Transport V. BRØNDUM A/S Item No. A0800063 RONDA 2-58 Duo Heavy Duty Industrial Vacuum Cleaner For Liquid Filtration and Transport IMPORTANT! Read this manual before you operate the machine Index Description of

More information

2x58 MW Coal Fired Power Plant at Mauritius

2x58 MW Coal Fired Power Plant at Mauritius 2x58 MW Coal Fired Power Plant at Mauritius The coal-fired power plant produces electricity by the burning of coal and air in a Circulating Fluidized Bed Combustion Boiler (CFBC), where it heats water

More information

1 1 Chip silo Plug screw Blow back valve Digester Discharge Screw / Feed Screw Pressurized Refiner Main Motor Technical Data T

1 1 Chip silo Plug screw Blow back valve Digester Discharge Screw / Feed Screw Pressurized Refiner Main Motor Technical Data T 1 1 Chip silo 2 3 4 5 6 7 Plug screw Blow back valve Digester Discharge Screw / Feed Screw Pressurized Refiner Main Motor 3 2 4 7 5 6 Technical Data Type Disc diameter Throughput capacity mm o.d. t/h PR

More information

THREADING TURNING MILLING BROACHING RUBBING HONING SPINNING LAPPING HOBBING DRILLING

THREADING TURNING MILLING BROACHING RUBBING HONING SPINNING LAPPING HOBBING DRILLING Oil mist separation and filter systems HIGHLY EFFICIENT AIR FILTRATION (STATUS 07/2014) THREADING TURNING MILLING BROACHING RUBBING HONING SPINNING LAPPING HOBBING DRILLING We set air in motion 2 We set

More information

Boretech China Make, Pet Bottles Recycling Line Ref Id SM4325 (Details-Specification mentioned hereunder are for indicative purpose only) DESIGN DATA 1.1 Capacity - PET bottles input : 1,500 kg/h - Dry

More information

CENTRIFUGAL PUMPS. STATE the purposes of the following centrifugal pump components:

CENTRIFUGAL PUMPS. STATE the purposes of the following centrifugal pump components: Pumps DOE-HDBK-1018/1-93 CENTRIFUGAL PUMPS CENTRIFUGAL PUMPS Centrifugal pumps are the most common type of pumps found in DOE facilities. Centrifugal pumps enjoy widespread application partly due to their

More information

The paper machine is constituted by equipment manufactured by the following companies:

The paper machine is constituted by equipment manufactured by the following companies: 1) PAPER MACHINE The paper machine is constituted by equipment manufactured by the following companies: Based on following project data: - CARCANO KMW - OMMA - DE PRETTO-ESCHER-WYSS - VOITH - VALMET COMO

More information

Goulds Model 3500 Medium Consistency Pump Systems. Pump System Advantage PP-1D. Standpipe Arrangement

Goulds Model 3500 Medium Consistency Pump Systems. Pump System Advantage PP-1D. Standpipe Arrangement Tower Arrangement Standpipe Arrangement Stock from washers and thickeners fall into special Goulds standpipes that are reverse tapered to prevent stock bridging. Systems include controls for vacuum, dilution,

More information

TREATMENT OF TEXTILES OR THE LIKE; LAUNDERING; FLEXIBLE MATERIALS NOT OTHERWISE PROVIDED FOR

TREATMENT OF TEXTILES OR THE LIKE; LAUNDERING; FLEXIBLE MATERIALS NOT OTHERWISE PROVIDED FOR XXXX D06 TREATMENT OF TEXTILES OR THE LIKE; LAUNDERING; FLEXIBLE MATERIALS NOT OTHERWISE PROVIDED FOR XXXX LAUNDERING, DRYING, IRONING, PRESSING OR FOLDING TEXTILE ARTICLES (apparatus for blocking, pressing,

More information

Operating Instructions for Fristam Powder Mixer

Operating Instructions for Fristam Powder Mixer Operating Instructions for Fristam Powder Mixer The Fristam Powder Mixer is used to dissolve or suspend powdery or liquid ingredients (e.g. sugar, milk powder, cocoa powder, thickeners, oils and liquid

More information

PUMPKIN SEED HARVESTING TECHNOLOGY 2019

PUMPKIN SEED HARVESTING TECHNOLOGY 2019 PUMPKIN SEED HARVESTING TECHNOLOGY 2019 Moty GmbH Piesing 20, AT 4846 Redlham office@moty.at www.moty.at Engineering changes, literal mistakes and prices are subjects to change Your reliable partner for

More information

Throughput of a thousand kilos and more GETECHA heavy-duty granulators

Throughput of a thousand kilos and more GETECHA heavy-duty granulators Throughput of a thousand kilos and more GETECHA heavy-duty granulators RS 6000 RS 8000 Choose the system partner who is also a competent dialogue partner: GETECHA. For more than five decades, we have been

More information

RSMX VSI Rotor Centrifugal Crusher. The cubicator for crushing and shaping

RSMX VSI Rotor Centrifugal Crusher. The cubicator for crushing and shaping RSMX VSI Rotor Centrifugal Crusher The cubicator for crushing and shaping Headquarters of BHS-Sonthofen The company BHS-Sonthofen, headquartered in Sonthofen, Germany, is an owner-operated group of companies

More information

CP-200 Push Button. CP Warewash Pump Instruction & Operation Manual Push Button , Rev1.0,

CP-200 Push Button. CP Warewash Pump Instruction & Operation Manual Push Button , Rev1.0, CP-200 - Warewash Pump Instruction & Operation Manual Push Button 20-08881-01, Rev1.0, 25.06.2012, Page 1 of 8 Contents A) Description B) Site Survey and Installation Requirements C) Package Contents D)

More information

AS 50 operating manual, 2013

AS 50 operating manual, 2013 AS 50 operating manual with Rotoclean roller cleaner 2013 Edition CONTENTS Important Safety Notes...... Page 1 CE EG Certification of conformity... 2 1. Technical specifications... 3 2. Installation 2.1

More information

INITIAL (Understanding) TYPES Soft Flow / Air-flow (Air Jet) Dyeing Machines,

INITIAL (Understanding) TYPES Soft Flow / Air-flow (Air Jet) Dyeing Machines, Jet Dyeing Machines INITIAL (Understanding) Knit goods usually wet process (i.e. pretreatment and dyeing) through Jet dying machines. These machines are fall under the category of batch dyeing machines.

More information

UNIVERSAL SERIES COMBINATION SHREDDER-FEEDER-EXTRUDER X:GRAN.

UNIVERSAL SERIES COMBINATION SHREDDER-FEEDER-EXTRUDER X:GRAN. UNIVERSAL SERIES COMBINATION SHREDDER-FEEDER-EXTRUDER X:GRAN > ONE-STEP technology > Process bulky plastic scrap > One-button automatic On/Off control > DUMP and RUN operation www.ngr.at TECHNOLOGY THE

More information

Multifunction pump for handling gaseous liquids in process engineering

Multifunction pump for handling gaseous liquids in process engineering Multifunction pump for handling gaseous liquids in process engineering Pumping liquids with a high gas content can be problematic, causing sharp losses in head and flow or even total cessation of pump

More information

Small size, big energy savings

Small size, big energy savings ATOX coal mill 2 Small size, big energy savings Key benefits - Handles all types and capacities of coal - Reliable, long-lasting operation - Simple, flexible operation - Superior separation efficiency

More information

FLOTTWEG CENTRIFUGES for Processing Slaughter By-Products

FLOTTWEG CENTRIFUGES for Processing Slaughter By-Products FLOTTWEG CENTRIFUGES for Processing Slaughter By-Products FLOTTWEG Your Competent and Reliable Partner Modern methods for processing slaughter by-products are characterized by the application of centrifugal

More information

Efficient Vacuum Conveyors Deliver Cost-Effective Solutions Pick-up, conveying and feeding of powders, granules and other bulk materials

Efficient Vacuum Conveyors Deliver Cost-Effective Solutions Pick-up, conveying and feeding of powders, granules and other bulk materials Efficient Vacuum Conveyors Deliver Cost-Effective Solutions Pick-up, conveying and feeding of powders, granules and other bulk materials VOLKMANN Inc. In the past, the flat price of a conveying system

More information

(Container with bottom unload) AV high vacuum. Description. COMPACT 30 kw. COMPACT 37 kw. COMPACT 37 kw high vacuum. COMPACT 45 kw high vacuum

(Container with bottom unload) AV high vacuum. Description. COMPACT 30 kw. COMPACT 37 kw. COMPACT 37 kw high vacuum. COMPACT 45 kw high vacuum High Power Vacuums Technical Catalogue 2015-2016 High Power Vacuum - COMPACT series mod. CFA Heavy duty Industrial vacuum cleaner for the suction of large quantities of powder or granular material. The

More information

Complete Waste Tire Recycling Line

Complete Waste Tire Recycling Line Complete Waste Tire Recycling Line Manufactured new in 2009 and started operation in 2010 and has less than three years in service. This line is designed to handle 1.5millon 2millon tires per year. This

More information

Paper machine dryer sections. Technology solutions for every need

Paper machine dryer sections. Technology solutions for every need Paper machine dryer sections Technology solutions for every need Paper grade features influenced through the dryer section Metso Paper has great experience in developing and supplying dryer sections for

More information

HIGH EFFICIENCY POOL DEHUMIDIFIER AND CONDITIONER WITH HIGH HEAT RECOVERY RATES. Air treatment unit. Swimming pool waste air 28 C-65%

HIGH EFFICIENCY POOL DEHUMIDIFIER AND CONDITIONER WITH HIGH HEAT RECOVERY RATES. Air treatment unit. Swimming pool waste air 28 C-65% Dry HIGH EFFICIENCY POOL DEHUMIDIFIER AND CONDITIONER WITH HIGH HEAT RECOVERY RATES Calculation of savings (for illustrative purposes) Operating scheme Note: power rates refer to 10,000 m 3 /h of air and

More information

CLEANING PRODUCT 10/22/2014 CLEANING PRODUCTS DEFINITION CLEANING, SORTING, AND GRADING

CLEANING PRODUCT 10/22/2014 CLEANING PRODUCTS DEFINITION CLEANING, SORTING, AND GRADING CLEANING, SORTING, AND GRADING DEFINITION Cleaning: remove foreign objects or materials which are not similar from a product. Sorting: separate product into several quality fraction based on the shape,

More information

How can we help YOU?

How can we help YOU? How can we help YOU? Our standard devices already cover a very wide area of film sealing technology. Yet as is well known, it is said that it is often the little things that cause the problems: modifications

More information

Sheet Formers "Rapid Koethen" System

Sheet Formers Rapid Koethen System 1/6 Sheet Formers "Rapid Koethen" System Type BB Sheet Former for Manual Operation The low-cost alternative with 1 to 4 Vacuum Dryer units. Provides manual control of the sheet forming and drying processes

More information

last editted by: Yuyang Chen last edited: 3/12/20152:52:00 PM Page 1 of 1

last editted by: Yuyang Chen last edited: 3/12/20152:52:00 PM Page 1 of 1 Name Refill friction stir spot welder Description RPS 100 spot friction welding system Valid from software version V02.21 Manufacturer and Harms & Wende GmbH & Co KG Model Location E3 2118J SOP Creation

More information

AQUA LOW-MEDIUM SPEED BOTTLE WASHER

AQUA LOW-MEDIUM SPEED BOTTLE WASHER AQUA LOW-MEDIUM SPEED BOTTLE WASHER BOTTLEWASHER AQUA WASHING CYCLE THE WASHING CYCLE CONSISTS OF FOUR DISTINCT PHASES. Pre-wash The pre-soaking stage takes place in one or two stages; after leaving the

More information

USTER INTELLIGIN-M APPLICATION REPORT. Monitoring of the ginning process THE GIN PROCESS CONTROL SYSTEM

USTER INTELLIGIN-M APPLICATION REPORT. Monitoring of the ginning process THE GIN PROCESS CONTROL SYSTEM USTER INTELLIGIN-M APPLICATION REPORT Monitoring of the ginning process THE GIN PROCESS CONTROL SYSTEM S. Dönmez Kretzschmar, A. Ellison April 2010 SE 639 Copyright 2010 by Uster Technologies AG All rights

More information

MAGNUM MAX ASPHALT PLANTS

MAGNUM MAX ASPHALT PLANTS MAGNUM MAX ASPHALT PLANTS F A Y A T M I X I N G P L A N T S MAGNUM MAX MARINI LATIN AMERICA brings the best solution for your projects. The MAGNUM MAX plants series offer all the necessary components for

More information

RECYCLED CARTONBOARD MILL. May 2009

RECYCLED CARTONBOARD MILL. May 2009 SPECIFICATIONS OF RECYCLED CARTONBOARD MILL May 2009 MAIN DETAILS: RECYCLED TRIPLEX. COATED CARTONBOARD Trim width: 2.180 mm. Working speed: 50-220 mpm Basis weight range: 150-650 g/m2 Production: 45.000

More information

Tender No. B1 Two Stage Continuous Bleaching Range (CBR)

Tender No. B1 Two Stage Continuous Bleaching Range (CBR) Tender No. B1 Two Stage Continuous Bleaching Range (CBR) Machine Specification Fabric quality :100 to 350 GSM Cotton shirting & Bottom weight(avg GSM=200) Capacity : 90000mtrs per day Roller width : 2000

More information

CHP-turbine room. CHP can capture almost EXTRACTED STEAM 20 PSI HIGH-PRESSURE STEAM 1250 PSI HEAT EXCHANGER HOT WATER SUPPLY F

CHP-turbine room. CHP can capture almost EXTRACTED STEAM 20 PSI HIGH-PRESSURE STEAM 1250 PSI HEAT EXCHANGER HOT WATER SUPPLY F 5 6 HIGH-PRESSURE STEAM is routed from the wood-chp boiler to the turbine. TURBINE BLADES spin at nearly 00 revolutions per second. Steam acting on the turbine blades creates mechanical energy in the TURBINE.

More information

Full Automatic Cup Printer

Full Automatic Cup Printer Model: DO-7 Full Automatic Cup Printer Cup printer model DO-7 Main Features Seven color-dry offset UV dryer on mandrel Automatic cup storage with capacity of 1700 to 2500 cups (expandable up to 6000 cups)

More information

A new look into the uhle dewatering process

A new look into the uhle dewatering process A new look into the uhle dewatering process This article, by LUCJAN RAUBIC 1 was submitted for publication SUMMARY This article describes a method for improving efficiency of uhle boxes in the process

More information

CONTENTS. B. System Design and Performance Requirements

CONTENTS. B. System Design and Performance Requirements 15625 Water Chillers This document provides design standards only, and is not intended for use, in whole or in part, as a specification. Do not copy this information verbatim in specifications or in notes

More information

Rif Cod i220-0

Rif Cod i220-0 15 52 50 6 13 53 51 2 9 8 3 20 19 18 5 1 7 14 10 4 17 Rif Cod 1 0010060 2 0060287 3 0060310 4 0080003 5 0080004 6 0080051 7 0080053 8 0080410 9 0080413 10 0080430 11 0080432 12 0080434 13 0080435 14 0080436

More information

Modern vacuum and overpressure generation for pneumatic conveying

Modern vacuum and overpressure generation for pneumatic conveying Modern vacuum and overpressure generation for pneumatic conveying Bernd Jack Dr.-Ing. K. Busch GmbH Contents 1. General 3 2. Fields of application 4 3. Description of vacuum 5 and overpressure generators

More information

Variable speed hydraulic coupling and drive unit of hydraulic coupling

Variable speed hydraulic coupling and drive unit of hydraulic coupling Variable speed hydraulic coupling and drive unit of hydraulic coupling I. Model designation YO / / / Modificait on code Output speed of drive unit (r/min) Input speed of coupling or drive unit (r/min)

More information

Sanborn Technologies Catalog of Products

Sanborn Technologies Catalog of Products Sanborn Technologies Catalog of Products 10/8/14 Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Freddy Products For In-Sump Cleaning and Coolant Recycling Ecovac 200 2KW Ecovac 200 3KW TOS

More information

Improved Dryer Control

Improved Dryer Control Improved Dryer Control Kenneth C. Hill President Kadant Johnson Systems Division David Vijh Senior Process Control Engineer Technical White Paper Series EXECUTIVE SUMMARY Significant improvements in dryer

More information

Crate washer EKW-1500

Crate washer EKW-1500 Crate washer EKW-1500 Overview Suitable for crates with maximum dimensions of 600 x 400 mm (based on E-crates). The capacity of this unit is a maximum of 170 crates per hour with a staying time of 45 seconds.

More information

OIL COOLER INSTRUCTION HANDBOOK

OIL COOLER INSTRUCTION HANDBOOK OIL COOLER INSTRUCTION HANDBOOK INDEX 1. GENERALITY 2 1.1 OPERATING RANGE 1.2 IMPORTANT 2. INSTALLATION 3 2.1 TRANSPORTATION 2.2 INSTALLATION LOCATION 2.3 PIPING 2.4 WIRING (see the electrical diagram

More information

LUNDBERG EDGE-TRIM GRANULATING SYSTEMS FOR PAPER/ADHESIVE PAPER AND PLASTIC

LUNDBERG EDGE-TRIM GRANULATING SYSTEMS FOR PAPER/ADHESIVE PAPER AND PLASTIC LUNDBERG EDGE-TRIM GRANULATING SYSTEMS FOR PAPER/ADHESIVE PAPER AND PLASTIC Granulator mounted on take-up for extruding line Cyclone systems for collecting two different types of plastic film Each system

More information

PLASMAC Ltd. Units 11&12 Aylesbury Business Centre Chamberlain Road Aylesbury Bucks. HP19 8DY. UK

PLASMAC Ltd. Units 11&12 Aylesbury Business Centre Chamberlain Road Aylesbury Bucks. HP19 8DY. UK PLASMAC Ltd. Units 11&12 Aylesbury Business Centre Chamberlain Road Aylesbury Bucks. HP19 8DY. UK Phone +44 (0)1296 398 698 Fax +44 (0)1296 395 110 Web www.plasmac.co.uk E-Mail sales@plasmac.co.uk Plasmac

More information

EN l Senking Batch Transfer Drying Tumbler DT Senking Batch Transfer Drying Tumbler DT High performance with less energy

EN l Senking Batch Transfer Drying Tumbler DT Senking Batch Transfer Drying Tumbler DT High performance with less energy EN l Senking Batch Transfer Drying Tumbler DT 60 240 Senking Batch Transfer Drying Tumbler DT 60 240 High performance with less energy Single dryer with loading belt. directly side by side. The dryers

More information

Installation and Operating Instructions DÜRR Regeneration Unit for X-ray developers XR 24, XR24 II, XR 24 Nova, XR 24 Pro

Installation and Operating Instructions DÜRR Regeneration Unit for X-ray developers XR 24, XR24 II, XR 24 Nova, XR 24 Pro Installation and Operating Instructions DÜRR Regeneration Unit for X-ray developers XR 24, XR24 II, XR 24 Nova, XR 24 Pro 2006/01 Content Important Information 1. Notes... 3 1.1 CE - Labeling... 3 1.2

More information

Since I started with Fomat in 1973 I have been following these guidelines:

Since I started with Fomat in 1973 I have been following these guidelines: Since I started with Fomat in 1973 I have been following these guidelines: provide only high quality products provide appropriate technical assistance understand the needs and problems of the customer

More information

SHREDDING & SCREENING

SHREDDING & SCREENING MACHINES & PLANTS FOR WASTE RECYCLING SOLUTIONS SHREDDING & SCREENING COMPANY PROFILE Founded in 1996, Promeco SpA is an Italian Company based in Como that manufactures, on proprietary technology, plants

More information

3500 XD. Medium Consistency Pumping Technology Introducing X-Ducer Medium Consistency Pumping Technology

3500 XD. Medium Consistency Pumping Technology Introducing X-Ducer Medium Consistency Pumping Technology 3500 XD Medium Consistency Pumping Technology Introducing X-Ducer Medium Consistency Pumping Technology 3500XD The Goulds X-Ducer Performance Advantage Improved Pumping Efficiencies - An increase of up

More information

System Components. Vacuum stations, Central filter systems, Vacuum receivers & Piping systems

System Components. Vacuum stations, Central filter systems, Vacuum receivers & Piping systems System Components Vacuum stations, Central filter systems, Vacuum receivers & Piping systems System Components Introduction Labotek centralised systems are recognized for their high level of durability

More information

FOW FOA COUNTERPRESSURE STERILIZERS

FOW FOA COUNTERPRESSURE STERILIZERS WHY AND HOW TO STERILIZE IN COUNTERPRESSURE The technology of moist-heat sterilization in counterpressure has been developed specifically for the terminal treatment of solutions in sealed containers. Its

More information

Appendix 13. Categories of Cooling and Heating systems

Appendix 13. Categories of Cooling and Heating systems EcoShopping - Energy efficient & Cost competitive retrofitting solutions for Shopping buildings Co-funded by the European Commission within the 7 th Framework Programme. Grant Agreement no: 609180. 2013-09-01

More information

OPERATION OF LAFER SOLVENT SCOURING PLANT

OPERATION OF LAFER SOLVENT SCOURING PLANT OPERATION OF LAFER SOLVENT SCOURING PLANT INDEX Operation principle... page 2 Machine attachments... page 3 Plant service s... page 4 Machine start-up and stop... page 5 Safety systems of plant... page

More information

folding boxboard, GT, GD, Tesliner I, II, III, Chipboard, Tube board Substance: g/m tpd ( tons/year)

folding boxboard, GT, GD, Tesliner I, II, III, Chipboard, Tube board Substance: g/m tpd ( tons/year) OFFER FOR SECOND-HAND EQUIPMENT: COATED BOARD MACHINE General information: Products: folding boxboard, GT, GD, Tesliner I, II, III, Chipboard, Tube board Substance: 140 650 g/m 2 Capacity: 80 100 tpd (25

More information

Drying systems for grain and oil seeds. Schmidt-Seeger Eco Dry, Eco Cool, Eco Dry Flex.

Drying systems for grain and oil seeds. Schmidt-Seeger Eco Dry, Eco Cool, Eco Dry Flex. Drying systems for grain and oil seeds. Schmidt-Seeger Eco Dry, Eco Cool, Eco Dry Flex. Drying systems for grain and oil seeds. Schmidt-Seeger Eco Dry, Eco Cool, Eco Dry Flex. Proper conservation safeguards

More information

MOTHER DAIRY A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED PURCHASE ENQUIRY

MOTHER DAIRY A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED PURCHASE ENQUIRY PURCHASE ENQUIRY Inquiry No : MDG/PUR/PKS/ENQ/Ice cream, Dated: 10 th Oct, 2014 Description : Purchase Inquiry for Supply, Installation and commissioning and testing of below listed Ice-cream Processing

More information

TEXTILE AIR ENGINEERING EASY INSTALLATION HIGH PERFORMANCE ENERGY EFFICIENCY

TEXTILE AIR ENGINEERING EASY INSTALLATION HIGH PERFORMANCE ENERGY EFFICIENCY EASY INSTALLATION HIGH PERFORMANCE ENERGY EFFICIENCY AUTOMATIC ROTARY AIR FILTERS Self-cleaned rotary air filter can be used in various applications. General area of use is textile plants for filtering

More information

Item No.16. The Corrugating plant is no longer part of the paper mill.

Item No.16. The Corrugating plant is no longer part of the paper mill. Item No.16 1. General information The Swiss owned company Bell has been erecting, installing and starting paper machinery up as new since 1965 and to date many reconstructions have been performed. The

More information

Köllemann GmbH Page 1 / 16

Köllemann GmbH Page 1 / 16 Köllemann GmbH Page 1 / 16 Our Design Features Pressure-Shock resistant Explosion-proof Wide range of materials available Forced cleaning (Self-cleaning) Zero-Gap-Design available Suitable for vacuum applications

More information

PAMA PRODUCT PASTEURIZATION, HEATING AND COOLING SYSTEMS

PAMA PRODUCT PASTEURIZATION, HEATING AND COOLING SYSTEMS PAMA PRODUCT PASTEURIZATION, HEATING AND COOLING SYSTEMS PAMA HIGH PERFORMANCES WITH NO WASTE Pama pasteurizers are a cut above competitors products thanks to the innovative and exclusive philosophy for

More information

Centrifugal Chiller. GFG-S/SIT Series GXG-S/SIT Series GSG-S/SIT Series

Centrifugal Chiller. GFG-S/SIT Series GXG-S/SIT Series GSG-S/SIT Series Centrifugal Chiller High Efficiency GFG-S/SIT Series GXG-S/SIT Series GSG-S/SIT Series Centrifugal Chiller High Efficiency Centrifugal Chiller HC-F-GFG-SSC Series (Super High Efficiency Type) HC-F-GXG-S

More information

Improving press performance step by step. Sami Remmi Vice President, Rolls & Workshop Services

Improving press performance step by step. Sami Remmi Vice President, Rolls & Workshop Services Improving press performance step by step Sami Remmi Vice President, Rolls & Workshop Services Improving press performance step by step Case: Thai Cane Paper PM 2, Thailand On this Shared Journey Forward,

More information

The Sterling Series. Pressing Excellence. Pre Pressing Full Pressing Rendering

The Sterling Series. Pressing Excellence. Pre Pressing Full Pressing Rendering The Sterling Series Pressing Excellence Pre Pressing Full Pressing Rendering The Sterling Series - Rosedowns & Desmet Ballestra De Smet Rosedowns Rosedowns was founded in 1777, and we have long been a

More information

Simatec Maschinenbau AG

Simatec Maschinenbau AG Simatec Maschinenbau AG Into the future with innovative technology Roll Crusher WB 1100/650 Simatec Maschinenbau AG Roll crusher machines - made in Switzerland Simatec stands for technically innovative

More information

Technique and common sense to the expertise

Technique and common sense to the expertise Textile catalogue Technique and common sense to the expertise For more than 30 years, TECHNIC ONE is specialized in the realization of turn-key projects. Our philosophy is to support you throughout your

More information

INDEX I.- FINAL TEST FOR PRODUCT SAFETY 3 II.- REPLACEMENT PROCEDURES 3 III.- TROUBLE SHOOTING CHART 5 IV.- WIRING DIAGRAM 6 V.- ELECTRICAL RATING 6

INDEX I.- FINAL TEST FOR PRODUCT SAFETY 3 II.- REPLACEMENT PROCEDURES 3 III.- TROUBLE SHOOTING CHART 5 IV.- WIRING DIAGRAM 6 V.- ELECTRICAL RATING 6 INDEX I.- FINAL TEST FOR PRODUCT SAFETY 3 II.- REPLACEMENT PROCEDURES 3 III.- TROUBLE SHOOTING CHART 5 IV.- WIRING DIAGRAM 6 V.- ELECTRICAL RATING 6 VI.- EXTERNAL PARTS FOR UPRIGHT VACUUM CLEANER PARTS

More information

TECHNICAL DATA MOBILE WASTE INCINERATOR

TECHNICAL DATA MOBILE WASTE INCINERATOR TECHNICAL DATA MOBILE WASTE INCINERATOR 1 SYSTEM DESCRIPTION Design and operating Cases: The Incinerator and its accessories shall be designed for the maximum medical, biohazardous or any type of waste

More information

Solid biofuel solutions

Solid biofuel solutions Solid biofuel solutions Clean heat with locally produced fuel Solid biofuels are the individually most important component in the conversion to a sustainable energy mix. Heat production from wood based

More information

This is how it works

This is how it works This is how it works Functional principle Thermal impulse sealing Thermal impulse sealing is a method for joining thermoplastic films. The sealing bar is equipped with a heating band ç for this purpose.

More information

VETO CLEANER 500 FLUE GAS CLEANER

VETO CLEANER 500 FLUE GAS CLEANER As of serial number 3100 0001 VETO CLEANER 500 FLUE GAS CLEANER USER MANUAL SPARE PARTS LIST Manufacturer: ALA TALKKARI Veljekset Ala-Talkkari Oy FI-62130 HELLANMAA TEL. +358 6 433 6333 FAX +358 6 437

More information

DAE Systems. Fan Selection Guide. Section 1: Terminology

DAE Systems. Fan Selection Guide. Section 1: Terminology DAE Systems Fan Selection Guide Section 1: Terminology CFM : Cubic Feet per Minute Technical Terms This refers to the amount of air a fan is able to move. Pressure Inches of water is a common method of

More information

SAFETY AND OPERATING MANUAL 400W. 125mm RANDOM ORBITAL SANDER JM400ROS

SAFETY AND OPERATING MANUAL 400W. 125mm RANDOM ORBITAL SANDER JM400ROS SAFETY AND OPERATING MANUAL 400W 125mm RANDOM ORBITAL SANDER JM400ROS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions

More information

ADVANCED Series 15P1 17P2 19P2

ADVANCED Series 15P1 17P2 19P2 A WIRTGEN GROUP COMPANY Continuous Mobile Asphalt Plants ADVANCED Series 15P1 17P2 19P2 02 03 The Advanced plants line combines the maximum portability of a continuous production plant with the quality

More information

Tools for other contacts Tools for FOC contacts Crimping machine TK-M Crimping machine TC-C

Tools for other contacts Tools for FOC contacts Crimping machine TK-M Crimping machine TC-C Contents Page for contacts Han D... 99.02 for contacts Han E... 99.04 for contacts Han C... 99.06 for other contacts... 99.08 for FOC contacts... 99.10 for Han high current contacts... 99.12 Summary Han

More information

CE Unit is suitable for material transport. The transported gas may be up to 80 C.

CE Unit is suitable for material transport. The transported gas may be up to 80 C. The manual contains: 1 Safety regulations 1.1 Electrical 1.2 Crush risk 1.3 Hazardous dust 1.4 Suction injuries 1.5 Noise 1.6 Pneumatic 1.7 Other equipment 2 Machine Operation 3 Installation Directions

More information

International Process Plants

International Process Plants International Process Plants Stock #600344 Oilseed Preparation & Conditioning Line 300 MTPD Visit us at: www.ippe.com General OverviewOverview 300 metric tons/day Capacity Used for Only 5 Years Stored

More information

Since 1986 WASHING. Washing units ensure maximum efficiency adaptable to any washing process

Since 1986 WASHING. Washing units ensure maximum efficiency adaptable to any washing process Since 1986 WASHING Washing units ensure maximum efficiency adaptable to any washing process 1 TVE-ESCALE engineering TRADITION TVE-ESCALE is the result of the merger between TEXTILE VACUUM EXTRACTOR CO.

More information