Grinding mill MISTRAL 50L (art. 650P)

Size: px
Start display at page:

Download "Grinding mill MISTRAL 50L (art. 650P)"

Transcription

1 Grinding mill MISTRAL 50L (art. 650P) USE AND MAINTENANCE MANUAL RIVER SYSTEMS SRL Via Marco Polo, Campodarsego (Padova) Italy Tel Fax: info@riversystems.it

2 INDEX INTRODUCTION... 2 REFERENCE GUIDE... 2 IDENTIFICATION NOTES... 2 GUARANTEE... 2 USE OF THE MACHINE... 2 SAFETY REGULATIONS... 3 CHECKS AND SUGGESTIONS BEFORE STARTING UP... 3 FAILURES DRAWBACKS SOLUTIONS... 4 MAINTENANCE... 4 SAFETY LABELS... 5 CLOGGING OF THE MILL / CLEANING OF THE MILL... 5 REPLACEMENT OF THE SIEVE... 5 REPLACEMENT OF THE BLADE... 6 REPLACEMENT OF THE MOTOR CARBON BRUSHES... 6 STORAGE... 6 DISPOSAL OF THE MACHINE... 7 TECHNICAL SPECIFICATIONS... 7 AVAILABLE SIEVES... 7 SPARE PARTS

3 ENGLISH INTRODUCTION This manual is an integral part of the machine and contains the necessary information for its operation and maintenance. Please read it carefully and follow the instructions. The manual, or its copy, shall be always available for the operator s perusal. We suggest contacting the manufacturer for any information, spare parts and accessories you may need. REFERENCE GUIDE This symbol indicates the most dangerous operations or situations. All safety regulations are important and must be strictly observed. This symbol indicates a very important note or advice. IDENTIFICATION NOTES The identification label of the machine that quotes all its data is placed (see picture on the right). Both the identification label and the ones with hazard symbols must always be visible and in a good state. If necessary, replace them with new ones, to be required to the manufacturer. GUARANTEE The guarantee is no more valid if the machine is used for other than intended use. At the time of delivery, check the machine for possible transport damages. Any claim shall be sent to River Systems srl in writing within 8 (eight) days of receipt. The guarantee is valid for 12 months from the purchase date. The guarantee decays if the instructions given in this manual are not respected and/or if the machine is modified or if non original spare parts are used. The guarantee does not include the electrical components. For any dispute the place of jurisdiction shall be Padova (Italy). USE OF THE MACHINE The grinding mill Mistral is used for the domestic preparation of flours with various thickness for animal feed. It can grind very thin flours or crush cereals and other dry products. The obtained product is of high quality, suitable for the preparation of animal feed and whole wheat. The grinding mill can be plugged to any household single-phase 220V/50Hz power outlet. Please make sure that the switch is in OFF position before plugging it. Do not use this mill to grind wood branches, plastic or ferrous material. Do not let the motor overheat. Use the grinding mill for maximum 30 minutes / 1 hour without interruption, according to the stress the motor is subjected to; let the motor cool for minutes before restarting grinding. The size of the product is regulated by the internal interchangeable holed sieve. The performance of the machine is determined by the type of sieve used and by the product to be ground. Minors are not allowed to use the grinding mill. 2

4 Any arbitrary modification to the machine relieves the manufacturer of any blame for any subsequent damage. Before using the grinding mill, it is necessary to wear hearing protections, dust mask, work gloves and face shield. Use the mill in well aired places only! SAFETY REGULATIONS In order to avoid accidents, please pay attention to the directions specified on the safety labels applied on the machine. The noise level of the machine is of about db (A) while working. Switch the motor off as soon as the mill has finished grinding (the revs of the motor increase). Before any cleaning or maintenance operation, make sure that the motor is off and the machine Please make sure that all the guards are installed and intact. Please remember that a careful user is the best safety against any accident. Do not use the grinding mill under the rain or in a very humid room or where there are flammable gases or liquids. Do not use the grinding mill with wet hands. Wait until the machine is cold before changing the sieve or making any maintenance operation. Before starting the grinding mill, place it on a solid and safe flat surface and make sure that all its parts are intact and correctly assembled. As soon as you finish grinding, switch off the motor and unplug the machine. Do not insert foreign bodies besides cereals. CAUTION: Cutting hazards. The grinding mill is supplied with a rotating blade and electric parts. Do not insert your hands in any hole or slot of the feed mill while it is working or plugged in. CHECKS AND SUGGESTIONS BEFORE STARTING UP Every grinding mill is tested before delivery. Make sure the machine is unplugged before making the following checks: - Check the blade wear. - Make sure that the needed sieve is installed correctly (see chapter Replacement of the sieve ). - Fill in the hopper with the product to be ground before starting the mill, unless the product to grind is similar to sugar, in which case, in order not to overstress the motor, put only small quantities of product. Make sure that the hopper is never empty. Switch off the mill as soon as grinding is over. 3

5 FAILURES DRAWBACKS SOLUTIONS Trouble Cause Remedy Instructions Excessive vibration The product is not ground The grinding mill does not work The blade or the sieve are broken A motor support is broken The blade or the sieve or the motor carbon brushes are worn The product to grind is too damp The thermal overload relay is released The motor has shortcircuited The motor carbon brushes are worn Replace the blade or the sieve Replace the motor support Replace the blade or the sieve or the motor carbon brushes Clean the mill and the sieve and grind drier products Re-establish the thermal overload relay Replace the motor Replace the motor carbon brushes To replace the blade or the sieve, see relative paragraph on page 22 and 23. This operation must be performed by specialized personnel. To replace the blade, see relative paragraph on page 23. To replace the sieve, see relative paragraph on page 22. To replace the motor carbon brushes, see relative paragraph on page 23. To clean the grinding mill, see relative paragraph on page 22. Put the switch in OFF position. Wait minutes before restarting the motor. If it still does not work, contact specialized personnel. Contact specialised personnel. To replace the motor carbon brushes, see relative paragraph on page 23. MAINTENANCE The maintenance operations must be carried out by specialized personnel, carefully following the instructions given in the present manual. Before any maintenance operation, make sure that the motor is off and the machine is Before any maintenance operation or check, clean the working area, wear work gloves and use suitable tools that are in good conditions. After any maintenance operation or check, restore the machine guards. After each use Every 10 working hours Every 50 working hours Every 200 working hours Periodic maintenance operations table We recommend a thorough cleaning of the inside of the mill. Check the tightness of the screws. Check the blade wear. Make sure that the electric cord is in good condition. Check the rotating parts. Clean the motor and especially the cooling fan with compressed air. Make sure that the motor carbon brushes are in good condition. 4

6 SAFETY LABELS As for the identification label of the machine, the safety labels must be kept visible and in a good state. If necessary, replace them with new ones, to be required to the manufacturer. Before starting the grinding mill wear a face shield. Wait until all the parts of the machine are completely motionless before touching them. Read the use and maintenance manual before starting the machine. Disconnect the tension before removing the guards. CLOGGING OF THE MILL / CLEANING OF THE MILL Before carrying out this operation, make sure that the motor is off and the machine is 1) Unfasten the metal belt and lift the upper part of the mill. 2) Unscrew the wing nuts that secure the sieve and remove it. 3) Clean all the parts with a cloth or with compressed air. 4) Reassemble the mill with care. REPLACEMENT OF THE SIEVE Before carrying out this operation, make sure that the motor is off and the machine is 1) Unfasten the metal belt and lift the upper part of the mill. 2) Unscrew the wing nuts that secure the sieve and remove it. 3) Replace the worn sieve with a new one (original) or with one with different holes. 4) Insert the new sieve and secure it with the wing nuts. 5) Reassemble the mill with care. 5

7 REPLACEMENT OF THE BLADE Before carrying out this operation, make sure that the motor is off and the machine is Wear work gloves to avoid being injured by the blade. 1) Unfasten the metal belt and lift the upper part of the mill. 2) Unscrew the wing nuts that secure the sieve and remove it. 3) Unscrew the bolt that secures the blade to the motor shaft. Remove the blade. Make sure not to lose any washer. 4) Replace the blade with an original spare one. Reinsert the washers, blade and wing nuts as shown in the picture on the right. 5) Reassemble the mill with care. REPLACEMENT OF THE MOTOR CARBON BRUSHES Before carrying out this operation, make sure that the motor is off and the machine is This operation shall be carried out by specialized personnel. 1) Unscrew the screws that secure the hopper to the central cylinder and remove the hopper. 2) After having removed the sieve, unscrew the bolts that secure the bin cover to the central cylinder. Remove the central cylinder, uncovering the motor compartment. 3) Remove the bolt (2) that blocks the brush. 4) Remove the plug (4) of the brush from its pin. 5) Remove the worn brush. 6) Execute the same operation for the second brush on the opposite side (B). 7) Make sure that the new brushes are assembled correctly, as well as the other parts of the motor. Finally reassemble the mill with care. STORAGE At the end of the working season or if the machine is not used for a long period, it is necessary to: - Clean thoroughly the machine both inside and outside; - Check it and, if necessary, replace the damaged or worn parts; - Tighten all the bolts; - Cover the machine after having stored it in an indoor and safe place. It is in your best interest to find your grinding mill in perfect conditions when you resume working. 6

8 DISPOSAL OF THE MACHINE As far as the Waste Electrical and Electronic Equipment (WEEE) are concerned, please note that: 1. The WEEE shall not be disposed as general waste, but they shall be collected separately; 2. For their disposal, please use the public or private collection systems foreseen by the local regulations; 3. This appliance may contain dangerous substances: an improper use or an incorrect disposal can have negative effects on human health and on the environment; 4. The improper disposal of the WEEE is prosecuted by the law. TECHNICAL SPECIFICATIONS Dimensionss of the mill Width Length Total height 42 cm 42 cm 101 cm Net weight Input 7,3 Kg 1200 W AVAILABLE SIEVES Supplied sieves Type of sieve Holes Ø 2 galvanised Holes Ø 4 galvanised Holes Ø 6 galvanised Holes Ø 8 galvanised Code 650P2,0 650P4,0 650P6,0 650P8,0 Optional sieves Type of sieve Holes Ø 0,6 st.steel Holes Ø 0,8 galvanised Holes Ø 1,5 galvanised Code 650P0,6 650P0,8 650P1,5 7

9 SPARE PARTS Pos. Code Description Unipolar switch with Faston connection Electric cord with Schuko plug Safety label: wear face shield Hex screw M6x60 ZN UNI 5739 DIN Flat washer M6 ZN UNI Flat washer M6x18 ZN DIN Hex nut M6 ZN 6S UNI Wing nut M6 ZN UNI Bin 50L (without lid) Flat washer M5 ZN UNI Special galvanised washer D8x29x Hex screw M5x16 ZN UNI 5739 DIN Stainless steel blade Tooth washer ext. M8 ZN DIN Rubber protection Hex nut M8 ZN 6S UNI Hopper Self thread. screw 3,9x12,7 cr.head DIN Motor protection Baffle Motor HP 1,6 230V-50Hz 1200W Bin lid Metal belt Galvanised washer P2,0 Sieve, holes Ø 2 (supplied) P4,0 Sieve, holes Ø 4 (supplied) P6,0 Sieve, holes Ø 6 (supplied) P8,0 Sieve, holes Ø 8 (supplied) Safety label: Keep hands clear while the machine is working read the manual - disconnect power supply Motor carbon brush 8

10 9

11 Fill in this part of the manual at the time of delivery; it is important to mention the above data in any communication with your dealer. Product: Delivery date: Stamp and signature of the retailer: 10

CombiGrinder. Instruction manual. Grinder for cattle, horse and pet clipper blades. swiss made. Version/Index: CombiGrinder/A 09-16

CombiGrinder. Instruction manual. Grinder for cattle, horse and pet clipper blades. swiss made. Version/Index: CombiGrinder/A 09-16 swiss made CombiGrinder Grinder for cattle, horse and pet clipper blades Instruction manual Version/Index: CombiGrinder/A 09-16 1 Instruction manual / CombiGrinder Contents 1 Safety regulations 1.1 Symbols

More information

D O U B L E A U G E R M O R TA R M I X E R OWNER S MANUAL

D O U B L E A U G E R M O R TA R M I X E R OWNER S MANUAL D O U B L E A U G E R M O R TA R M I X E R OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

Tornado Operations & Maintenance Manual

Tornado Operations & Maintenance Manual TORNADO INDUSTRIES 7401 W. LAWRENCE AVENUE CHICAGO, IL 60706 (708) 867-5100 FAX (708) 867-6968 www.tornadovac.com Tornado Operations & Maintenance Manual MODEL NO. 99690 BD 22/14, 99720 BD 26/14 L9722

More information

20-GALLON MOBILE PARTS WASHER OWNER S MANUAL

20-GALLON MOBILE PARTS WASHER OWNER S MANUAL 20-GALLON MOBILE PARTS WASHER OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in

More information

English BT3600

English BT3600 www.blackanddecker.com 3 English BT3600 FIG. 1 FIG. 2 150mm BENCH GRINDER BT3600 GENERAL SAFETY RULES WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric

More information

INSTRUCTIONS AND WARRANTY

INSTRUCTIONS AND WARRANTY INSTRUCTIONS AND WARRANTY MODEL: SB400E SALTON 450W STAINLESS STEEL GLASS JUG BLENDER Congratulations on purchasing our Salton 450W Stainless Steel Glass Jug Blender. Each unit is manufactured to ensure

More information

RSH2455G OPERATOR S MANUAL ELECTRIC QUIET CHIPPER SHREDDER

RSH2455G OPERATOR S MANUAL ELECTRIC QUIET CHIPPER SHREDDER RSH2455G ELECTRIC QUIET CHIPPER SHREDDER OPERATOR S MANUAL Important! It is essential that you read the instructions in this manual before mounting and operating this machine. Subject to technical modifications.

More information

DEUTSCH Bio-Master Bio-Max

DEUTSCH Bio-Master Bio-Max DEUTSCH D 8217-3029-02 Bio-Master Bio-Max SVENSKA S 4. 2. 1. 3. 4. 5. 3 S SVENSKA 7. 6. 8. 9. 10. 4 SVENSKA S 11. 12. 4. 13. 4. 15. 14. 5 GB ENGLISH SAFETY PRECAUTIONS GENERAL This symbol means WARNING.

More information

High-Velocity Floor Fan

High-Velocity Floor Fan High-Velocity Floor Fan Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

OWNERS MANUAL ST50BT

OWNERS MANUAL ST50BT OWNERS MANUAL ST50BT NaceCare Solutions 1205 Britannia Road East, Mississauga, ON L4W 1C7 Phone: 1-800-387-3210 Fax: 1-800-709-2896 SUMMARY SUMMARY...2 ON CONSIGNMENT OF MACHINE...3 INTRODUCTION...3 MACHINE

More information

5.0 cu ft Electric Concrete Mixer

5.0 cu ft Electric Concrete Mixer Save This Manual for Future Reference 5.0 cu ft Electric Concrete Mixer Operator s Manual MODEL NUMBER YM0146 SERIAL NUMBER PURCHASE DATE Both model number and serial number may be found on the main label

More information

2500 Electric Blower Vac

2500 Electric Blower Vac 2500 Electric Blower Vac Owner s Manual Important Please read this Owner s Manual and the Express Warranty before using this product. The Warranty does not cover damage due to misuse or failure to follow

More information

22In. Oscillating Pedestal Fan. Owner s Manual

22In. Oscillating Pedestal Fan. Owner s Manual 22In. Oscillating Pedestal Fan Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

BG8SS. 8 Inch Slow Speed Bench Grinder with LED Lights Assembly & Operating Instructions

BG8SS. 8 Inch Slow Speed Bench Grinder with LED Lights Assembly & Operating Instructions BG8SS 8 Inch Slow Speed Bench Grinder with LED Lights Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This

More information

The Espressa fruits & vegetables juicer

The Espressa fruits & vegetables juicer The Espressa fruits & vegetables juicer USER'S MANUAL VITALJUICER - Version 1.0 June 2001 Page 1 MACHINE IDENTIFICATION DATA INTRODUCTION Thank you for choosing a juicing machine produced by A.A.T. SpA.

More information

EHA Hoffmann International GmbH

EHA Hoffmann International GmbH EHA Hoffmann International GmbH User manual EHA-TRANSPRINT HP 2020 Machine-No.: Year: EHA Hoffmann International GmbH Michelsbergstraße 24 D-57080 Siegen/Germany Telephone: +49 271 39 32-0 Telefax: +49

More information

ATD /8 Electric Drill

ATD /8 Electric Drill ATD-10538 3/8 Electric Drill Tool specifications: Rated Voltage: (V) 120 Rated Frequency: (Hz) 60 Rated current: (A) 3.3 No-load Speed: (RPM) 0-2700 Speed Selection: Yes Right/Left Rotation: Yes Chuck

More information

hp Dust Collector With Vacuum Attachment

hp Dust Collector With Vacuum Attachment Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate

More information

BG6UL. 6 Inch Bench Grinder Assembly & Operating Instructions

BG6UL. 6 Inch Bench Grinder Assembly & Operating Instructions BG6UL 6 Inch Bench Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important information

More information

High-Pressure Washer BY02-VBP-WTR BY02-VBP-WTH. CAUTION : Do not use this device before reading the instructions.

High-Pressure Washer BY02-VBP-WTR BY02-VBP-WTH. CAUTION : Do not use this device before reading the instructions. High-Pressure Washer BY02-VBP-WTH BY02-VBP-WTR CAUTION : Do not use this device before reading the instructions. 1 1. Safety Instructions The appliance has been designed solely for private use outdoors

More information

ASSEMBLY AND OPERATING INSTRUCTIONS PADDLE MIXER. FOX Model F V / 110V

ASSEMBLY AND OPERATING INSTRUCTIONS PADDLE MIXER. FOX Model F V / 110V ASSEMBLY AND OPERATING INSTRUCTIONS PADDLE MIXER FOX Model F7860 240V / 110V 1 Paddle Mixer FOX MODEL F7860 240V / 110V TABLE OF CONTENTS Safety instructions Page 3 Specifications Page 5 Environmental

More information

EYS SEPARATOR EYS 01 G. USER MANUAL for EYS SCREW-PRESS SEPARATOR MODEL EYS 01 G. User Manual for EYS 01G Screw-Press Separator

EYS SEPARATOR EYS 01 G. USER MANUAL for EYS SCREW-PRESS SEPARATOR MODEL EYS 01 G. User Manual for EYS 01G Screw-Press Separator USER MANUAL for EYS SCREW-PRESS SEPARATOR MODEL EYS 01 G User Manual for EYS 01G Screw-Press Separator Table of Contents Page 1. Introduction 2 2. General Safety Instructions 3 3. Installation 5 4. Start-up

More information

Shredder FD 8906CC Cross-Cut

Shredder FD 8906CC Cross-Cut Shredder FD 8906CC Cross-Cut 1/2017 OPERATOR MANUAL Machine Specs Model: FD 8906CC Motor Power Sheet Capacity Serial #: 7.5KW (10HP) Three-phase, 220V, 50/60 Hz, 50 Amp dedicated line required, CS8365

More information

36" Drum Plug Aerator OWNER S MANUAL

36 Drum Plug Aerator OWNER S MANUAL 36" Drum Plug Aerator OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

Pond Pump 280 / 420 / 575. Operating instructions Notice d emploi Instrucciones de uso

Pond Pump 280 / 420 / 575. Operating instructions Notice d emploi Instrucciones de uso Pond Pump 280 / 420 / 575 Operating instructions Notice d emploi Instrucciones de uso REMINDER CALL 1-866-627-3435 BEFORE RETURNING TO STORE. Part Description QTY A Pump 1 B 3/4 in. ID tubing adapter with

More information

20In. Oscillating Wall-Mount Fan. Owner s Manual

20In. Oscillating Wall-Mount Fan. Owner s Manual 20In. Oscillating Wall-Mount Fan Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

User Manual GV25 GV35 GV702. Company information: Original instructions GV12066 (1)

User Manual GV25 GV35 GV702. Company information:   Original instructions GV12066 (1) User Manual Original instructions GV25 GV35 GV702 Company information: www.vipercleaning.eu info-eu@vipercleaning.com GV12066 (1) 2012-04-10 USER MANUAL ENGLISH TABLE OF CONTENTS Introduction... 4 Manual

More information

TTV 4500 / TTV 4500 HP / TTV 7000

TTV 4500 / TTV 4500 HP / TTV 7000 TTV 4500 / TTV 4500 HP / TTV 7000 EN OPERATING MANUAL AXIAL FAN TRT-BA-TTV4500-4500HP-7000-TC-003-EN Table of contents The current version of the operating manual can be found at: Notes regarding the operating

More information

PS /2 Inch Angle Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

PS /2 Inch Angle Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. PS07214 4 1/2 Inch Angle Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.

More information

Qualcast 430W Grass Trimmer (Model: GT2826)

Qualcast 430W Grass Trimmer (Model: GT2826) Qualcast 430W Grass Trimmer (Model: GT2826) Instruction Manual After Sales Support UK/Ireland 0845 077 8888 Republic of Ireland 0124 77708 Web www.homebasespares.co.uk Important - Please read these instructions

More information

60In. Ceiling Fan. Owner s Manual

60In. Ceiling Fan. Owner s Manual 60In. Ceiling Fan Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may

More information

IMPORTANT SAFETY REMINDERS

IMPORTANT SAFETY REMINDERS USER MANUAL IMPORTANT SAFETY REMINDERS This appliance should only be used for domestic cleaning, as described in this user guide. Please ensure that this guide is fully understood before operating the

More information

SuperKlean Washdown Products

SuperKlean Washdown Products DURAREEL DR8 & DR8S INSTALLATION AND MAINTENANCE INSTRUCTIONS **DO NOT THROW AWAY AFTER INSTALLATION** **SAVE AND DISPLAY PROMINENTLY WHERE THIS EQUIPMENT IS USED** GENERAL WARNINGS High pressure and hot

More information

52 CEILING FAN. Owner s Manual Models #50336, 50337

52 CEILING FAN. Owner s Manual Models #50336, 50337 52 CEILING FAN Owner s Manual Models #50336, 50337 If a problem cannot be remedied or you are experiencing difficulty in installation, please contact the Service Department: 1-877-706-3267, 9 a.m.- 5 p.m.

More information

Cable Drum Machine. Operation Manual 40 SERIES. Cleans 2" to 4" lines up to 75' N O T F O R R O O T S

Cable Drum Machine. Operation Manual 40 SERIES. Cleans 2 to 4 lines up to 75' N O T F O R R O O T S Cable Drum Machine Operation Manual 40 SERIES Cleans 2" to 4" lines up to 75' Used For: Sinks, Showers & Floor Drains N O T F O R R O O T S WARNING - Read All Instructions, When Using Electric Tools, Basic

More information

20-GALLON PARTS WASHER OWNER S MANUAL

20-GALLON PARTS WASHER OWNER S MANUAL 20-GALLON PARTS WASHER OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious

More information

SOVEREIGN W Grass Trimmer (Model: GT2317) Instruction Manual. Important - Please read these instructions fully before starting assembly

SOVEREIGN W Grass Trimmer (Model: GT2317) Instruction Manual. Important - Please read these instructions fully before starting assembly SOVEREIGN 2937573 250W Grass Trimmer (Model: GT2317) Instruction Manual After Sales Support UK/Ireland 0345 640 0800 Web www.argosspares.co.uk Important - Please read these instructions fully before starting

More information

AIRSPEED TECHNOLOGY High velocity airflow Powerful cleaning performance ZAS1000A

AIRSPEED TECHNOLOGY High velocity airflow Powerful cleaning performance ZAS1000A AIRSPEED TECHNOLOGY High velocity airflow Powerful cleaning performance ZAS1000A 2 Content Important safeguards 3 Before using your vacuum cleaner 4 Identifying parts of your vacuum cleaner 5 How to use

More information

INSTALLATION AND OPERATING INSTRUCTIONS GN2. HIGH EFFICIENCY CAST IRON BOILER FOR LIQUID and/or GAS FUELS

INSTALLATION AND OPERATING INSTRUCTIONS GN2. HIGH EFFICIENCY CAST IRON BOILER FOR LIQUID and/or GAS FUELS INSTALLATION AND OPERATING INSTRUCTIONS HIGH EFFICIENCY CAST IRON BOILER FOR LIQUID and/or GAS FUELS INDEX 1. Technical information... page 3 2. Dimensional and technical characteristics... page 3 3. Packing

More information

USE AND INSTALLATION HANDBOOK

USE AND INSTALLATION HANDBOOK Date : 30/10/14 Rev. 02 PR.T : FG006203 USE AND INSTALLATION HANDBOOK (SLA1) ALARM1, ALARM2 ALARM WITH BUFFER BATTERY Via Enrico Fermi, 8-35020 Polverara PD Tel.049/9772407 Fax.049/9772289 www.fourgroup.it

More information

Electric Hover Mower. Owner s Manual. Important

Electric Hover Mower. Owner s Manual. Important Electric Hover Mower Owner s Manual Important Please read this Owner s Manual and the Express Warranty before using this product. The Warranty does not cover damage due to misuse or failure to follow the

More information

Leaf mulcher Trituradora de hojas Déchiqueteuse à feuilles. Pag 07 Pag 14 Pag 22 WG430. helpline NumBEr worX (9679)

Leaf mulcher Trituradora de hojas Déchiqueteuse à feuilles. Pag 07 Pag 14 Pag 22 WG430. helpline NumBEr worX (9679) Trituradora de hojas Déchiqueteuse à feuilles F ES Pag 07 Pag 14 Pag 22 helpline NumBEr 1-866-354-worX (9679) WG430 8 1 2 7 3 4 5 6 6 A B C a E1 E2 b F G H I J K1 K2 L1 L2 L3 L4 M1 f e d c d b M2 N a 6

More information

PUGMILL/MIXER. Instruction Manual NVS-07

PUGMILL/MIXER. Instruction Manual NVS-07 92895B PUGMILL/MIXER Instruction Manual NVS-07 Attention After carefully reading this manual, be sure to store it in a safe and convenient place for easy reference. Before using this unit, please read

More information

1 HP Air Mover. Owner s Manual

1 HP Air Mover. Owner s Manual 1 HP Air Mover Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may

More information

SPECIFICATIONS FEATURES

SPECIFICATIONS FEATURES FEATURES Excellent for collecting the large chips which will drop into the garbage can before reaching the impeller. The filter bag filters out the remaining sawdust down to 5 microns. With the cyclone

More information

3PCS M N O J K B F E D Q R. * Certain models only

3PCS M N O J K B F E D Q R. * Certain models only INSTRUCTION MANUAL I H* A 3PCS G B F J K M N O L C E D Q R T S P U * Certain models only 1 2 A B a b 3 4 5 6 7 8 9 10 3PCS 11 12 b a 13 GB INSTRUCTIONS FOR SAFE USE This appliance should only be used for

More information

User s Guide REO-MECH. Industrial Rebar Benders & Cutters

User s Guide REO-MECH. Industrial Rebar Benders & Cutters User s Guide REO-MECH Industrial Rebar Benders & Cutters WARNING: PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THIS MACHINE Machine is not rated and should not be used for commercial rebar production

More information

K* L* M I H B* J* G Q R S P N O F E* D A B. * Certain models only 3PCS

K* L* M I H B* J* G Q R S P N O F E* D A B. * Certain models only 3PCS INSTRUCTION MANUAL A* 3PCS K* L* B* J* M I H G Q R S P N O F U T V W X C E* D Y* * Certain models only A B 1 2 A B a b 3 4 5 6 7 8 9 10 3PCS 11 12 b a 13 14 GB INSTRUCTIONS FOR SAFE USE This appliance

More information

Bottle Height Adjustment Bottle Diameter Adjustment Cork Length Adjustment Cork Depth Adjustment

Bottle Height Adjustment Bottle Diameter Adjustment Cork Length Adjustment Cork Depth Adjustment P55 Champagne Corker Setup and Maintenance Read this carefully before operating the corker. One person should be assigned to maintain the corker. Only this primary operator should make adjustments to the

More information

Air Storm Fans. Air Storm 18 Fiberglass Fan Installation and Operation Manual

Air Storm Fans. Air Storm 18 Fiberglass Fan Installation and Operation Manual Air Storm 18 Fiberglass Fan Installation and Operation Manual Table of Contents GrowerSELECT General Page...3 Safety...4 Warning Labels...4 Installation...5 Operation Safety...5 Maintenance Safety...5

More information

INSTRUCTIONS AND WARRANTY

INSTRUCTIONS AND WARRANTY INSTRUCTIONS AND WARRANTY MODEL NO. SPF40E SALTON ELITE PEDESTAL FAN 40CM Congratulations on purchasing our Salton Elite Pedestal Fan. Each unit is manufactured to ensure safety and reliability. Before

More information

SAFETY AND OPERATING MANUAL. 450W/46cm HEDGE TRIMMER JM450PHT

SAFETY AND OPERATING MANUAL. 450W/46cm HEDGE TRIMMER JM450PHT SAFETY AND OPERATING MANUAL 450W/46cm HEDGE TRIMMER JM450PHT GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may

More information

ST1. Mod. USE AND MAINTENANCE MANUAL

ST1. Mod. USE AND MAINTENANCE MANUAL Mod. USE AND MAINTENANCE MANUAL 2 Use and Maintenance Manual ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

More information

PS-2/ES Automated pack & tag machine with IndES fastening system

PS-2/ES Automated pack & tag machine with IndES fastening system English Manual PS-2/ES Automated pack & tag machine with IndES fastening system Contents 1. Introduction 2. Important Safety Instructions 3. PS-2/ES 4. Unpacking the machine 5. Setting up the machine 6

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Power Mixer UT2204 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Power Mixer UT2204 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Power Mixer UT04 0078 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model UT04 No load speed (min - )

More information

TURBO Fiberglass Cone Fan and Grill Fan 48'' Belt Drive. Installation & Operator s Instruction Manual

TURBO Fiberglass Cone Fan and Grill Fan 48'' Belt Drive. Installation & Operator s Instruction Manual TURBO Fiberglass Cone Fan and Grill Fan 48'' Belt Drive Installation & Operator s Instruction Manual July 1998 MV1383B Chore-Time TURBO TM Fan Extended Warranty Chore-Time Equipment warrants new TURBO

More information

ANTIBACTERIAL HAND VAC WITH UV LIGHT

ANTIBACTERIAL HAND VAC WITH UV LIGHT User manual ANTIBACTERIAL HAND VAC WITH UV LIGHT CVH5743M 02/12 HOME APPLIANCES 1) Press the lever down. 2) Insert the vacuum cleaner while holding the lever down. 3) Once the vacuum cleaner is inserted

More information

Industrivej 3-9 DK 9460 Brovst KEF-MOTOR A/S. Fax Instruction Manual PSD 200 Industrial Grinders

Industrivej 3-9 DK 9460 Brovst KEF-MOTOR A/S. Fax Instruction Manual PSD 200 Industrial Grinders KEF-MOTOR A/S Industrivej 3-9 DK 9460 Brovst Tlf. +45 9823 6088 Fax. +45 9823 6144 1. Instruction Manual PSD 200 Industrial Grinders EU declaration of conformity KEF-MOTOR A/S Industrivej 3-9 DK-9460 Brovst

More information

INFRARED IP55 HEATER INSTRUCTIONS FOR: MODEL:- QZWP45N 1. SAFETY INSTRUCTIONS

INFRARED IP55 HEATER INSTRUCTIONS FOR: MODEL:- QZWP45N 1. SAFETY INSTRUCTIONS INSTRUCTIONS FOR: INFRARED IP55 HEATER MODEL:- QZWP45N Thank you for purchasing a Consort Claudgen product. Manufactured to a high standard this product will, if used according to these instructions and

More information

11. Please follow cleaning instructions carefully so as to avoid injury or damage. 12. Should the Fan or protection fuse fail to work properly, turn

11. Please follow cleaning instructions carefully so as to avoid injury or damage. 12. Should the Fan or protection fuse fail to work properly, turn Read these instructions before use and keep them safe. If you pass the appliance on, pass on the instructions too. Remove all packaging, but keep it until you are satisfied. Important Safeguards Before

More information

Grain crusher Universal. Purpose: This machine is designed for the crushing of grain in agricultural operation.

Grain crusher Universal. Purpose: This machine is designed for the crushing of grain in agricultural operation. Grain crusher Universal. Purpose: This machine is designed for the crushing of grain in agricultural operation. Operating instructions and parts catalogue This grain crusher provides you with a machine

More information

TCUT10UL 2.5 HP 10 Tile Saw Assembly & Operating Instructions

TCUT10UL 2.5 HP 10 Tile Saw Assembly & Operating Instructions TCUT10UL 2.5 HP 10 Tile Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation and maintenance.

More information

Easy Rooter. Operating Instructions

Easy Rooter. Operating Instructions Easy Rooter Operating Instructions For 3" through 10" lines (75mm 250mm) Your Easy Rooter is designed to give you years of trouble-free, profitable service. However, no machine is better than its operator.

More information

DUST EXTRACTOR INSTRUCTION MANUAL. 550W (3/4 HP) INDUCTION MOTOR 1850W AUTOMATIC POWER OUTLET 65L COLLECTION BAG ø100mm X 2.

DUST EXTRACTOR INSTRUCTION MANUAL. 550W (3/4 HP) INDUCTION MOTOR 1850W AUTOMATIC POWER OUTLET 65L COLLECTION BAG ø100mm X 2. KNOW YOUR PRODUCT DUST EXTRACTOR 550W (3/4 HP) INDUCTION MOTOR 1850W AUTOMATIC POWER OUTLET 65L COLLECTION BAG ø100mm X 2.5M SUCTION HOSE INSTRUCTION MANUAL WARNING: Read all safety warnings and all instructions.

More information

Silent TS. Nr / Ideas for dental technology / A. Made in Germany

Silent TS. Nr / Ideas for dental technology / A. Made in Germany Silent TS Nr. 2921-0050 / 2921-1050 21-9191 30102012 / A Made in Germany Ideas for dental technology 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Silent TS Nr. 2921-0050

More information

MODEL MC-UL592 MC-UL594 POWER SOURCE. 230V - 240V ~ 50 Hz MAX INPUT 1400 W 1500 W NOMINAL INPUT DIMENSIONS (W x L x H)

MODEL MC-UL592 MC-UL594 POWER SOURCE. 230V - 240V ~ 50 Hz MAX INPUT 1400 W 1500 W NOMINAL INPUT DIMENSIONS (W x L x H) Order Number: PMMA091040CE Vacuum Cleaner MC-UL592/MC-UL594 SPECIFICATION MODEL MC-UL592 MC-UL594 POWER SOURCE 230V - 240V ~ 50 Hz MAX INPUT 1400 W 1500 W NOMINAL INPUT DIMENSIONS (W x L x H) 1200-1300

More information

OPERATING MANUAL. BAK Thermoplastic Welding Technology AG 1

OPERATING MANUAL. BAK Thermoplastic Welding Technology AG 1 OPERATING MANUAL BAK Thermoplastic Welding Technology AG 1 SAFETY Danger to life Unplug the tool before opening it as live components and connections are exposed. Danger of fire and explosion in case of

More information

AUTOMATIC GRANULAR ICE FLAKER

AUTOMATIC GRANULAR ICE FLAKER AUTOMATIC GRANULAR ICE FLAKER INSTRUCTIONS AND WARNINGS 24480 rev. 01 It is strictly forbidden to reproduce this instruction manual or any part thereof. Dear Customer, Congratulations on choosing a

More information

Instruction Manual Suppository Penetration Tester. Type PM 30

Instruction Manual Suppository Penetration Tester. Type PM 30 Instruction Manual Suppository Penetration Tester Type PM 30 ERWEKA GmbH * Ottostr. 20 22 * 63150 Heusenstamm * Germany * Tel: +49 (0) 6104 6903-0 Fax: +49 (0) 6104 6903-40 * E-mail: info@erweka.com *

More information

Installation and Operation Manual

Installation and Operation Manual 1645 Lemonwood Dr. Santa Paula, CA 93060 USA Toll Free: 1 (800) 253-2363 Tel: 1 (805) 933-9970 Fax: 1 (805) 933-9160 www.thecoolboss.com Cool Boss Portable Evaporative Air Cooler Installation and Operation

More information

USER S MANUAL WITH REFERENCE TO THE STANDARDS IN USE FLYWHEEL SLICERS MOD. 370V-330V

USER S MANUAL WITH REFERENCE TO THE STANDARDS IN USE FLYWHEEL SLICERS MOD. 370V-330V USER S MANUAL WITH REFERENCE TO THE STANDARDS IN USE FLYWHEEL SLICERS MOD. 370V-330V INDEX OF CONTENTS FOREWORD page 3 MACHINE INFORMATION page 4 General warnings SAFETY DEVICES MOUNTED ON THE SLICER page

More information

3.5-GALLON PARTS WASHER OWNER S MANUAL

3.5-GALLON PARTS WASHER OWNER S MANUAL 3.5-GALLON PARTS WASHER OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious

More information

O P E R A T O R S M A N U A L M O D E L S PR 32 / 98 TRANSLATION OF THE ORIGINAL MANUAL

O P E R A T O R S M A N U A L M O D E L S PR 32 / 98 TRANSLATION OF THE ORIGINAL MANUAL O P E R A T O R S M A N U A L M O D E L S PR / 98 TRANSLATION OF THE ORIGINAL MANUAL 8 9 7. Tray. Pusher. Switch. Worm casing Lock knob. Worm casing group 6. Worm casing 7. Worm 8. Cutter 9. Plate 0. Nut

More information

DXAPV3N. Air Purifier. With. Enviro-neutralising Technology DXAPV3N

DXAPV3N. Air Purifier. With. Enviro-neutralising Technology DXAPV3N DXAPV3N Air Purifier With Enviro-neutralising Technology DXAPV3N WARNING: Please read before use these instructions and keep them for future reference. SAFETY WARNINGS ATTENTION! This unit is regarded

More information

Air Storm Fans. Air Storm 24 Fiberglass Fan Installation and Operation Manual

Air Storm Fans. Air Storm 24 Fiberglass Fan Installation and Operation Manual Air Storm 24 Fiberglass Fan Installation and Operation Manual Hog Slat Inc. Newton Grove, NC USA May 2015 Table of Contents GrowerSELECT General Page...3 Safety...4 Warning Labels...4 Installation...5

More information

DOMEKT ReGO 400VE(W)-B Series Air Handling Units Installation and Maintenance Service Manual

DOMEKT ReGO 400VE(W)-B Series Air Handling Units Installation and Maintenance Service Manual DOMEKT ReGO 400VE(W)-B Series Air Handling Units EN Content Safety Requirements...3 Transportation...3 Brief Description of the Unit...5 Installation...6 Maintenance...11 Technical Information......13

More information

INSTRUCTIONS AND WARRANTY

INSTRUCTIONS AND WARRANTY INSTRUCTIONS AND WARRANTY MODEL: SJM40 SALTON 350W STAINLESS STEEL JUICER Congratulations on purchasing our Salton 350W Stainless Steel Juicer. Each unit is manufactured to ensure safety and reliability.

More information

getting the best from your new cleaner...

getting the best from your new cleaner... VC73360MUK-CyclonicBaglessRev3 3/11/05 4:41 pm Page 1 Cyclonic bagless vacuum cleaner Please read and keep these instructions getting the best from your new cleaner... If your cleaner isn t picking up

More information

Air Storm Fans. Air Storm 54 Fiberglass Fan Installation and Operation Manual

Air Storm Fans. Air Storm 54 Fiberglass Fan Installation and Operation Manual Air Storm 54 Fiberglass Fan Installation and Operation Manual Table of Contents GrowerSELECT General Page... 3 Safety... 4 Warning Labels... 4 Installation... 5 Operation Safety... 5 Maintenance Safety...

More information

JDW Leaf Blower. EQ750 - Assembly Instructions. Please Read All Instructions Thoroughly Before Starting Assembly

JDW Leaf Blower. EQ750 - Assembly Instructions. Please Read All Instructions Thoroughly Before Starting Assembly JDW Leaf Blower EQ750 - Assembly Instructions Please Read All Instructions Thoroughly Before Starting Assembly 1 Components 1) Bottom Tube section 2) Rollers 3) Top Tube Section 4) Leaf collection bag

More information

- 2 - IMPORTANT SAFETY REMINDERS

- 2 - IMPORTANT SAFETY REMINDERS USER MANUAL IMPORTANT SAFETY REMINDERS This appliance should only be used for domestic cleaning, as described in this user guide. Please ensure that this guide is fully understood before operating the

More information

Ceiling Sweep Fan Assembly Instructions

Ceiling Sweep Fan Assembly Instructions Ceiling Sweep Fan Assembly Instructions CSF Series Installation Note: This fan must be installed by a licenced electrical contractor Improperly installed ceiling sweep fans can be dangerous and expensive

More information

TTV 1500 / TTV 3000 OPERATING MANUAL CONVEYING FAN TRT-BA-TTV TC EN

TTV 1500 / TTV 3000 OPERATING MANUAL CONVEYING FAN TRT-BA-TTV TC EN TTV 1500 / TTV 3000 EN OPERATING MANUAL CONVEYING FAN TRT-BA-TTV1500-3000-TC2016-26-004-EN Table of contents Notes regarding the operating manual... 2 You can download the current version of the operating

More information

Before Putting Into Use. Important. Tips for Energy Savings

Before Putting Into Use. Important. Tips for Energy Savings Before Putting Into Use Before connecting the appliance to the power supply, let it stand for about 2 hours, which will reduce a possibility of malfunctions in the cooling system due to transport handling.

More information

INSTRUCTIONS MANUAL. 8-Speed Stand Mixer

INSTRUCTIONS MANUAL. 8-Speed Stand Mixer INSTRUCTIONS MANUAL 8-Speed Stand Mixer MM-106W (White) MM-106R (Red) THIS PRODUCT IS FOR HOUSEHOLD USE ONLY! PLEASE READ THIS MANUAL THOROUGHLY BEFORE FIRST USE AND SAVE IT FOR FUTURE REFERENCE. General

More information

Model Letter Opener Revision 3 - Brush Transport

Model Letter Opener Revision 3 - Brush Transport Model 5050 Letter Opener Revision 3 - Brush Transport Before You Start The 5050 model letter opener is a high speed milling cutter letter opener, capable of opening up to 30,000 envelopes per hour with

More information

Read this manual through carefully before installing/using the cleaner, paying special attention to the SAFETY INSTRUCTIONS

Read this manual through carefully before installing/using the cleaner, paying special attention to the SAFETY INSTRUCTIONS PW1370TD 2 EN Read this manual through carefully before installing/using the cleaner, paying special attention to the SAFETY INSTRUCTIONS 3 E3 E1 C3 A1-A2-A3-A4 B4 B1 B5 B2 C1 B3 D 1 4 1 2 3 4 5 6 7 Ø13

More information

INSTRUCTION MANUAL 1

INSTRUCTION MANUAL 1 INSTRUCTION MANUAL 1 2 A J B1 I B C K L M D E N F H G 1 2 24 HRS 3 4 12 HRS 2 1 5 6 7 8 HRS HRS 9 10 11 12 13 14 15 INSTRUCTIONS FOR SAFE USE This appliance should only be used for domestic cleaning, as

More information

Tornado Operations & Maintenance Manual

Tornado Operations & Maintenance Manual Tornado Industries, LLC 333 Charles Court West Chicago, IL 60185 www.tornadovac.com Tornado Operations & Maintenance Manual MODEL NO. 99414 Form No. L9740AB Tornado Industries, LLC. All rights reserved

More information

INSTRUCTION MANUAL FOR DUTCHESS MODEL 260 BAGEL & BUN SLICER

INSTRUCTION MANUAL FOR DUTCHESS MODEL 260 BAGEL & BUN SLICER INSTRUCTION MANUAL FOR DUTCHESS MODEL 260 BAGEL & BUN SLICER Table of Contents Safety Information I thru VII Uncrating Instructions 1 Introduction 2 Adjustment Instructions 3 Operating Instructions, Cleaning,

More information

INSTRUCTIONS MANUAL ELECTRIC COMMERCIAL GRADE PATIO COOLER

INSTRUCTIONS MANUAL ELECTRIC COMMERCIAL GRADE PATIO COOLER INSTRUCTIONS MANUAL ELECTRIC COMMERCIAL GRADE PATIO COOLER @2012.11-V1.1 Aviator X2 Page 2 of 15 Contents Instruction......3 Outline Drawing...3 Wiring Diagram......4 Installation Instructions...5-8 Checking

More information

INSTRUCTION MANUAL W-400

INSTRUCTION MANUAL W-400 USE and MAINTENANCE INSTRUCTION MANUAL Bellaria WBX WB GRAVITY SPRAY GUN Series LPH-400 WB en it fr es pt de se TECHNICAL DATA Classic Plus Series LPH-400 (LVLP) Classic Plus Nozzle_Needle set Combination

More information

Tornado Operations & Maintenance Manual

Tornado Operations & Maintenance Manual TORNADO INDUSTRIES, LLC 7401 W. Lawrence Avenue Chicago, IL 60706 Ph (708) 867-5100 Fax (708) 867-6968 www.tornadovac.com Tornado Operations & Maintenance Manual MODEL NO. 99410 BR 13/1MW L9735Rev_C Tornado

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS Power Shovel Form No. 3362-567 Rev A Model No. 38361 Serial No. 310000001 and Up Operator's Manual If you have questions or problems, call toll free 1-800-808-2963 (US) or 1-800-208-3072 (Canada) before

More information

ProAction. Paper Shredder. Installation & User Instructions Please keep for future reference 903/1537

ProAction. Paper Shredder. Installation & User Instructions Please keep for future reference 903/1537 ProAction Paper Shredder Installation & User Instructions Please keep for future reference 903/1537 Important Please read these instructions fully before installing or using These instructions contain

More information

USER S MANUAL ATH WH220

USER S MANUAL ATH WH220 USER S MANUAL ATH WH220 INDEX INTRODUCTION... - 3 - General information s... - 3 - Description of pneumatic jack... - 4 - Operation of jack... - 5 - Technical data... - 6 - Dimension drawing... - 6 - INSTALLATION...

More information

HT650 TM FAN DRIVE SERVICE INSTRUCTIONS

HT650 TM FAN DRIVE SERVICE INSTRUCTIONS HT650 TM FAN DRIVE SERVICE INSTRUCTIONS When unpacking your product, remove all components and inspect them to ensure that no damage occurred during shipping. If any components are missing or damaged,

More information

PORT700CF Portable Fume Collector

PORT700CF Portable Fume Collector 11975 Portland Ave. S. Suite 104 Burnsville, MN 55337 Phone: 952-894-6637 Fax: 952-894-0750 Email: info@ventaire.com Website: www.ventaire.com PRODUCT GUIDE FOR PORT700CF Portable Fume Collector REV:110314

More information

CHIPPER PC1 INSTRUCTIONS FOR INSTALLATION OPERATION AND MAINTENANCE. Series 35

CHIPPER PC1 INSTRUCTIONS FOR INSTALLATION OPERATION AND MAINTENANCE. Series 35 Cl/SfB (73.4) X CHIPPER PC1 INSTRUCTIONS FOR INSTALLATION OPERATION AND MAINTENANCE Series 35 Imperial Machine Company (Peelers) Limited Harvey Road, Croxley Green, Herts WD3 3AX, England Telephone: 01923

More information

ELECTRIC BODY SAW INSTRUCTIONS. Item #31660

ELECTRIC BODY SAW INSTRUCTIONS. Item #31660 ELECTRIC BODY SAW INSTRUCTIONS Item #31660 The EASTWOOD ELECTRIC BODY SAW is great for use on virtually all metals including steel, aluminum, brass and more. Cuts wood, fiberglass and other materials with

More information