CHAPTER 15 REFERENCED STANDARDS SECTION MC 1502 STANDARDS. Number Title section number Manual D 95 Residential Duct Systems
|
|
|
- Margaret Griffin
- 5 years ago
- Views:
Transcription
1 CHAPTER 15 REFERENCED STANDARDS SECTION MC 1501 GENERAL General. This chapter lists the standards that are referenced in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard identification, the effective date and title and the section or sections of this document that reference the standard Subsequent additions, modifications or deletions. Refer to the rules of the department for any subsequent additions, modifications or deletions that may have been made to these standards in accordance with Section of the Administrative Code Applicability. The application of the referenced standards shall be as specified in Section SECTION MC 1502 STANDARDS ACCA Air Conditioning Contractors of America 1712 New Hampshire Ave, NW Washington, DC Manual D 95 Residential Duct Systems ANSI American National s Institute 11 West 42nd Street New York, NY reference number Title section number Z Installation of Domestic Gas Conversion Burners Z Vented Gas Fireplaces , Z Decorative Gas Appliances for Installation in Solid-Fuel Burning Fireplaces Z Fuel Cell Power Plants Air-Conditioning and Refrigeration Institute Suite North Fairfax Drive ARI Arlington, VA Specifications for Fluorocarbon and Other Refrigerants American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc Tullie Circle, NE ASHRAE Atlanta, GA ASHRAE 2001 ASHRAE Fundamentals Handbook , Safety for Refrigeration Systems , , , , , , , NEW YORK CITY MECHANICAL CODE 119
2 ASHRAE continued Designation and Safety Classification of Refrigerants , , ASHRAE 2000 HVAC Systems and Equipment Handbook ASME American Society of Mechanical Engineers Three Park Avenue New York, NY B (R1999) Pipe Threads, General Purpose (Inch) , B Malleable Iron Threaded Fittings, Classes 150 & Table B Pipe Flanges and Flanged Fittings NPS 1 / 2 through NPS 24 With B16.5a-1998 Addenda Table B Factory Made Wrought Steel Buttwelding Fittings Table B Forged Fittings, Socket-Welding and Threaded Table B (R1994) Cast Bronze Threaded Fittings Table B (R1994) Cast Copper Alloy Solder Joint Pressure Fittings , Table B Wrought Copper and Copper Alloy Solder Joint Pressure Fittings with B16.22a-1998 Addenda , Table B Cast Copper Alloy Solder Joint Drainage Fittings DWV Table B (R1998) Cast Copper Alloy Pipe Flanges and Flanged Fittings: Class 150, 300, 400, 600, 900, 1500 and Table B Cast Copper Alloy Fittings for Flared Copper Tubes Table B Wrought Steel Buttwelding Short Radius Elbows and Returns Table B Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings-DWV Table B Power Piping Code , BPVC 2004 Boiler & Pressure Vessel Code (Sections I, II, IV, V & VI, VIII & IX) , , , , CSD Controls and Safety Devices for Automatically Fired Boilers American Society for Nondestructive Testing PO Box Arlington Lane ASNT Columbus, OH SNT TC 1A 1980 Recommended Practice ASTM ASTM International 100 Barr Harbor Drive West Conshohocken, PA A 53/A 53M 01 Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated Welded and Seamless Table , Table , A el Specification for Seamless Carbon Steel Pipe for High-Temperature Service Table , Table , A Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings Table A Specification for Copper Brazed Steel Tubing Table A 420/A 420M 01 Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service Table A Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines Table B Specification for Solder Metal B Specification for Seamless Copper Pipe, Sizes , , Table , Table B Specification for Seamless Red Brass Pipe, Sizes , , Table , Table B Specification for Seamless Copper Tube, Bright Annealed B Specification for Seamless Copper Tube Table , Table B 88 99el Specification for Seamless Copper Water Tube , , Table , Table B Specification for Seamless Brass Tube Table B Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube , Table NEW YORK CITY MECHANICAL CODE
3 ASTM continued B el Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service , , Table B Specification for Threadless Copper Pipe, Sizes Table , Table B e01 Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube C Specification for Clay Flue Linings , Table C Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation D Test Method for Flash Point by Tag Closed Tester D Test Method for Flash Point of Pensky-Martens Closed Cup Tester D Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and Table D Test Method for Environmental Stress-Cracking of Ethylene Plastics Table D Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe, Schedules 40, 80 and Table D Specifications for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings D Specification for Poly (Vinyl Chloride)(PVC) Pressure-Rated Pipe (SDR-Series) Table D Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR) Table D a Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading D Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter Table D Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings, Schedule Table D Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings, Schedule Table D a Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule Table D Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings Table , D a Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems D Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing Table , D a Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials Table D 2846/D 2846M 99 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water Distribution Systems Table , D Specification for Filament-Wound Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Pipe Table D Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter Table D el Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus D a Specification for Polybutylene (PB) Plastic Hot- and Cold- Water Distribution Systems Table , D Specification for Polyethylene Plastics Pipe and Fittings Materials Table E Test Method for Surface Burning Characteristics of Building Materials , 510.8, , , 604.3, E e Test Method for Fire Tests of Building Construction and Materials , , , E e01 Test Method for Behavior of Materials in a Vertical Tube Furnace at 750 C E Test Method for Fire Tests of Through-Penetration Fire Stops F Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule Table F Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule Table F 441/F 441M 99 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and Table F 442/F 442M 99 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR) Table F Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe and Fittings F Specification for Crosslinked Polyethylene (PEX) Tubing Table F Specification for Crosslinked Polyethylene (PEX) Plastic Hot and Cold-Water Distribution Systems Table , Table F Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing Table , F Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe Table F e Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe Table NEW YORK CITY MECHANICAL CODE 121
4 American Welding Society 550 N.W. LeJeune Road P.O. Box AWS Miami, FL A Specifications for Filler Metals for Brazing and Braze Welding , CSA Canadian s Association 178 Rexdale Blvd. Rexdale (Toronto), Ontario, Canada M9W 1R3 CAN/CSA B137.10M 99 Crosslinked Polyethylene/Aluminum/Polyethylene Composite Pressure Pipe Systems Table Department of Labor Occupational Safety and Health Administration c/o Superintendent of Documents US Government Printing Office DOL Washington, DC CFR Part (1974) Air Contaminants International Institute of Ammonia Refrigeration Suite Connecticut Ave., NW IIAR Washington, DC Equipment, Design, and Installation of Ammonia Mechanical Refrigerating Systems MSS Manufacturers ization Society of the Valve & Fittings Industry, Inc. 127 Park Street, N.E. Vienna, VA SP Pipe Hangers and Supports Selection and Application North American Insulation Manufacturers Association Suite Canal Center Plaza NAIMA Alexandria, VA AH Fibrous Glass Duct Construction s , NEW YORK CITY MECHANICAL CODE
5 NFPA National Fire Protection Association Batterymarch Park Quincy, MA Flammable Combustible Code , Installation of Oil-Burning Equipment , , , 901.2, 918.1, 920.2, 922.1, , , Stationary Combustion Engines and Gas Turbines , 811.2, 915.1, Fire Protection for Laboratories Using Chemicals Table 403.3, 407.1, National Fuel Gas Code , 910.7, Liquefied Petroleum Gas Code Explosion Prevention Systems National Electrical Code Incinerators and Waste and Linen Handling Systems and Equipment , B 97 Repair Garages Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate Solids , Installation of Equipment for the Removal of Smoke and Grease-laden Vapors from Commercial Cooking Equipment Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances , Table , 806.1, 811.1, Method of Test for Flame Travel and Smoke of Wires and Cables for Use in Air-Handling Spaces Identification of the Hazards of Materials for Emergency Response , 510.1, Table , Installation of Stationary Fuel Power Plants Single Burner Boiler Operation Prevention of Furnace Explosions/Implosions in Multiple Burner Boiler-Furnaces Atmospheric Fluidized-Bed Boiler Operation NYC/NYS New York City Codes/New York State Codes/NYC Agencies Energy Conservation Construction Code of New York State , 301.2, 303.3, 312.1, 514.1, 603.9, 604.1, 905.4, , New York City Air Pollution Code , , 904.1, 905.3, New York City Building Code based on 2003 IBC , 106.5, , , , , , 302.1, 302.2, 304.7, , 308.8, , 401.4, 401.6, 402.1, , 406.1, , , , 504.2, , , , , 509.1, 510.6, , , 510.7, , 512.2, 513.1, 513.2, 513.3, , 513.5, , , , , , , , , , 601.2, , , 602.3, 603.1, , , , , , , , , , , , , 607.6, , , 801.3, , , 901.5, 902.1, 908.3, , 908.4, 910.3, 925.1, , , , , , , New York City Electrical Code based on 2002 NEC , 301.7, , , , , , 606.3, New York City Fire Code , 310.1, 311.1, 502.5, , , , , , , , , , 502.7, 502.8, 502.9, , , ,, 509.1, , , 510.4, , , , , ,, ,515.1, , 908.7, , , , , New York City Fuel Gas Code based on 2003 IFGC , 201.3, 301.3, 701.1, 801.1, , 807.1, 901.1, 906.1, 917.6, New York City Fuel Oil Tank Construction s , New York City Plumbing Code based on 2003 IPC , 301.8, 512.2, 908.5, , , , , , , , , , , , New York State Department of Environmental Conservation Petroleum Bulk Storage Code (6 NYCRR-612, 613, 614) New York State Department of Labor Industrial Code Rule Part , New York State Department of Labor Industrial Code Rule Part NEW YORK CITY MECHANICAL CODE 123
6 NYC/NYS continued New York State Department of Labor Industrial Code Rule Part , United States Environmental Protective Agency Technical Requirements and Corrective Action Requirements for Owners and Operators of Underground Storage Tanks 40 CFR Part SMACNA Sheet Metal & Air Conditioning Contractors National Assoc., Inc Fafayette Center Road Chantilly, VA SMACNA 95 HVAC Duct Construction s Metal and Flexible , SMACNA 92 Fibrous Glass Duct Construction s , UL Underwriters Laboratories, Inc. 333 Pfingsten Road Northbrook, IL Vent or Chimney Connector Dampers for Oil-Fired Appliances with Revisions through September Steel Underground Tanks for Flammable and Combustible Liquids Steel Tanks for Oil-Burner Fuel , Table (2) Factory-Built Chimneys, Residential Type and Building Heating Appliance with Revisions through March Factory-Built Fireplaces with Revisions through November , Aboveground Tanks for Flammable and Combustable Liquids , Household Electric Storage Tank Water Heaters with revisions through October Factory-made Air Ducts and Air Connectors with Revisions through December , 603.5, , , , Commercial Electric Cooking Appliances With Revisions Through January Refrigerant-Containing Components and Accessories, Nonelectrical with Revisions Through October Pumps for Oil-Burning Appliances-with revisions through December 22, Solid-Fuel and Combination-Fuel Central and Supplementary Furnaces with Revisions Through May Refrigeration Unit Coolers with Revisions through November Commercial Refrigerators and Freezers with Revisions through April Flexible metallic Hose - with revisions through October Fire Dampers - with Revisions through October, C 96 Ceiling Dampers , S 99 Smoke Dampers with Revisions through December , 607.3, High-Efficiency, Particulate, Air Filter Units - with revisions through april 21, Type L Low-Temperature Venting Systems with Revisions through April Exhaust Hoods for Commercial Cooking Equipment-with Revisions through April Oil-Fired Boiler Assemblies with Revisions through January , Oil-Fired Centeral Furnaces with Revisions through January Oil-Fired Floor Furnaces with Revisions through January Oil-Fired Wall Furnaces with Revisions through January Oil-Fired Unit Heaters with Revisions through January Oil-Fired Storage Tank Water Heaters-With revisions through January Fireplace Stoves with Revisions through January , Outline of Investigation for Power Ventilators for Restaurant Exhaust Appliances Residential Incinerators with Revisions through May Heating, Water Supply and Power Boilers Electric with Revisions Through November Control Units and Accessories for Fire Alarm Systems Electrostatic Air Cleaners Oil-Burning Stoves with Revisions through November , Air Filter Units - with revisions through October , NEW YORK CITY MECHANICAL CODE
7 UL continued Medium Heat Appliance Factory-Built Chimneys Grease Filters for Exhaust Ducts Electric Commercial Clothes Drying Equipment with Revisions through October Electric Water Heaters for Pools and Tubs - with revisions through November 25, Glass-Fiber Reinforced Plastic Underground Storage Tanks for Petroleum Products, Alcohols, and Alcohol-Gasoline Mixtures Electronic Booster and Commercial Storage Tank Water Heaters - with Revisions Through September Solid-Fuel Type Room Heaters with Revisions through January Chimney Liners with Revisions through July , Fire Test of Pneumatic Tubing for Flame and Smoke Characteristics - with Revisions through March Fire Tests of Plastic Sprinkler Pipe for Visible Flame and Smoke Characteristics with Revisions through June Heating and Cooling Equipment - with Revisions through August , 918.1, 918.3, Fire Test for Heat and Visible Smoke Release for Discrete Products and their Accessories Installed in Air-Handling Spaces-With Revisions through February Outline of Investigation Electric Clothes Dryer with Revisions through February Outline of Investigation for Commercial Wood-Fired Baking Ovens Refractory Type NEW YORK CITY MECHANICAL CODE 125
8 NEW YORK CITY MECHANICAL CODE
CHAPTER 15 REFERENCED STANDARDS
CHAPTER 15 REFERENCED STANDARDS This chapter lists the standards that are referenced in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the
CHAPTER 15 REFERENCED STANDARDS. Air-Conditioning, Heating and Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203
CHAPTER 15 REFERENCED STANDARDS This chapter lists the standards that are d in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard
CHAPTER 15 REFERENCED STANDARDS. Air-Conditioning, Heating and Refrigeration Institute 4100 North Fairfax Drive, Suite 200 Arlington, VA 22203
CHAPTER 15 REFERENCED STANDARDS This chapter lists the standards that are d in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard
CHAPTER 17 STANDARDS STANDARDS Broadway, New York, NY 10018,
STANDARDS Chapter 17, Part II CHAPTER 17 STANDARDS 1701.0 Scope Part I of this chapter covers standards that are hereby declared to be part of this code. Part II of this chapter lists standards which relate
(a) Flame shall not spread to the outer extremities of the sample on the 8 ft 12 ft (2440 mm 3660 mm) wall. Flashover shall not occur.
First Revision No. 1-NFPA 501-2015 [ Section No. 5.3.1.3 ] 5.3.1.3 The following conditions shall be met when an interior finish material is tested using the test protocol of NFPA 286, Standard Methods
TABLE OF CONTENTS. Tentative Agenda. Tentative Order of Discussion. A2L Task Group Report III. Uniform Mechanical Code Change Public Comments
TABLE OF CONTENTS I Tentative Agenda II Tentative Order of Discussion III A2L Task Group Report IV Uniform Mechanical Code Change Public Comments 2017 Uniform Mechanical Code Technical Committee Meetings
Public Input No. 1-NFPA 90B-2015 [ Chapter 2 ]
![Public Input No. 1-NFPA 90B-2015 [ Chapter 2 ]](/thumbs/74/71051808.jpg "Public Input No. 1-NFPA 90B-2015 [ Chapter 2 ]")
Public Input No. 1-NFPA 90B-2015 [ Chapter 2 ] Chapter 2 Referenced Publications 2.1 General. The documents or portions thereof listed in this chapter are referenced within this standard and shall be considered
Second Revision No. 1-NFPA 90A-2016 [ Section No ] Submitter Information Verification. Committee Statement
![Second Revision No. 1-NFPA 90A-2016 [ Section No ] Submitter Information Verification. Committee Statement](/thumbs/89/99621071.jpg "Second Revision No. 1-NFPA 90A-2016 [ Section No ] Submitter Information Verification. Committee Statement")
Second Revision No. 1-NFPA 90A-2016 [ Section No. 2.3.2 ] 2.3.2 ASTM International Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ASTM C411, Standard
CHAPTER 6 [CE] REFERENCED STANDARDS
![CHAPTER 6 [CE] REFERENCED STANDARDS](/thumbs/76/74450928.jpg "CHAPTER 6 [CE] REFERENCED STANDARDS")
CHAPTER 6 [CE] REFERENCED STANDARDS User note: About this chapter: Chapter 6 lists the full title, edition year and address of the promulgator for all standards that are referenced in the code. The section
2016 Uniform Solar Energy & Hydronics Code Technical Committee Meeting IAPMO World Headquarters, Ontario, CA October 26, 2016 AGENDA
2016 Uniform Solar Energy & Hydronics Code Technical Committee Meeting IAPMO World Headquarters, Ontario, CA October 26, 2016 AGENDA I. Call to Order II. Chairman Comments III. Announcements IV. Self Introductions
CHAPTER 6 REFERENCED STANDARDS. American Architectural Manufacturers Association 1827 Walden Office Square Suite 550 Schaumburg, IL
CHAPTER 6 REFERENCED STANDARDS This chapter lists the standards that are d in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard
CHAPTER 5 REFERENCED STANDARDS. American Architectural Manufacturers Association 1827 Walden Office Square Suite 550 Schaumburg, IL
CHAPTER 5 REFERENCED STANDARDS This chapter lists the standards that are d in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard
Read Only Copy Not For Distribution. Chapter 19. Referenced Standards 19.1 REFERENCED STANDARDS 19.2 STANDARDS ORGANIZATIONS
19.1 REFERENCED STANDARDS Referenced Standards Chapter 19 Table 19.1 lists the standards that are referenced within the requirements of this Code. Table 19.1 shows the designation number of the standard,
First Revision No. 2-NFPA [ Global Input ] Submitter Information Verification. Committee Statement. 1 of 11 1/18/2016 5:43 PM
![First Revision No. 2-NFPA [ Global Input ] Submitter Information Verification. Committee Statement. 1 of 11 1/18/2016 5:43 PM](/thumbs/95/122743458.jpg "First Revision No. 2-NFPA [ Global Input ] Submitter Information Verification. Committee Statement. 1 of 11 1/18/2016 5:43 PM")
1 of 11 1/18/2016 5:43 PM First Revision No. 2-NFPA 51-2015 [ Global Input ] Throughout standard remove references to the following and replace with the following: (1) CGA C-7 Guide to Precautionary Labelling
CHAPTER 45 REFERENCED STANDARDS
CHAPTER 45 REFERENCED STANDARDS This chapter lists the standards that are d in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard
Standard Compared 2012 Changes of the International Building Code and National Fire Protection Association- 101
Standard Compared 2012 Changes of the International Building Code and National Fire Protection Association- 101 For the Florida Building Commission And the Fire Code Advisory Council Introduction The scope
BSR/ASHRAE Addendum b to ANSI/ASHRAE Standard FORWORD
(This foreword is for information only and is not part of this addendum) FORWORD Changes in this addendum to ANSI/ASHRAE 15-1994 are made to add water as a refrigerant, include absorption refrigeration
Public Comment No. 23-NFPA [ Section No ] Statement of Problem and Substantiation for Public Comment Related Item
![Public Comment No. 23-NFPA [ Section No ] Statement of Problem and Substantiation for Public Comment Related Item](/thumbs/88/116226748.jpg "Public Comment No. 23-NFPA [ Section No ] Statement of Problem and Substantiation for Public Comment Related Item")
Public Comment No. 23-NFPA 96-2015 [ Section No. 2.3.1 ] 2.3.1 ASTM Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ASTM E84, Standard Test Method
Summary of BBS Proposed Ohio Mechanical Code Rule Changes October 2016
Summary of BBS Proposed Ohio Mechanical Code Rule Changes October 2016 Ohio Administrative Code Rule Number OMC Section IMC origin Reason for proposed 4101:2-2-01 Air, Makeup 2015 Modified definition Air,
Second Revision No. 5-NFPA [ Section No ] Supplemental Information. Submitter Information Verification. Committee Statement
![Second Revision No. 5-NFPA [ Section No ] Supplemental Information. Submitter Information Verification. Committee Statement](/thumbs/95/124422248.jpg "Second Revision No. 5-NFPA [ Section No ] Supplemental Information. Submitter Information Verification. Committee Statement")
1 of 7 3/4/2016 12:02 PM Second Revision No. 5-NFPA 56-2016 [ Section No. 1.1.2 ] 1.1.2 Nonapplication of Standard. This standard shall not apply to the following items: (1)* Piping systems covered by
Throughout standard remove references to the following and replace with the following:
of 35 12/3/2015 7:13 AM Public Input No. 1-NFPA 90A-2015 [ Global Input ] Throughout standard remove references to the following and replace with the following: (1) ANSI/UL and replace with UL. (2) ANSI/ASHRAE
CHAPTER 45 REFERENCED STANDARDS
CHAPTER 45 REFERENCED STANDARDS Point of Information City of Seattle Ordinance 121524 adopts the 2003 Seattle Fire Code and adds the following three National Fire Protection s, as amended by that same
Page 1 of 13 Second Revision No. 1-NFPA 326-2014 [ Section No. 2.3.1 ] 2.3.1 ACGIH Publications. American Conference of Governmental Industrial Hygienists, 1330 Kemper Meadow Drive, Cincinnati, OH 45240-1634.
CHAPTER 45 REFERENCED STANDARDS. number Title section number HB Specification for Highway Bridges, 17th Edition
CHAPTER 45 REFERENCED STANDARDS This chapter lists the standards that are d in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the standard
SECTION (15530) - REFRIGERANT PIPING
PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Tubes. 2. Fittings. SECTION 23 23 00 (15530) - REFRIGERANT PIPING 3. Joining Materials. 4. Specialties. B. Related Sections: 1.02 REFERENCES 1. Section
Standard for tests for flammability of plastic materials for parts in devices and appliances
IAS Accreditation Number TL-212 Company Name Address 3933 U.S. Route 11 Cortland, NY 13045 Contact Name Terence J. O'Beirne, Quality Manager Telephone (607)758-6316 Effective Date of Scope September 25,
First Revision No. 2-NFPA 90B-2012 [ Section No. 1.3 ] Submitter Information Verification. Committee Statement and Meeting Notes
![First Revision No. 2-NFPA 90B-2012 [ Section No. 1.3 ] Submitter Information Verification. Committee Statement and Meeting Notes](/thumbs/78/77992447.jpg "First Revision No. 2-NFPA 90B-2012 [ Section No. 1.3 ] Submitter Information Verification. Committee Statement and Meeting Notes")
First Revision No. 2-NFPA 90B-2012 [ Section No. 1.3 ] 1.3 Application. 1.3.1 This standard shall apply to all systems for the movement of environmental air in structures that serve the following, except
National Fire Protection Association. 1 Batterymarch Park, Quincy, MA Phone: Fax:
National Fire Protection Association 1 Batterymarch Park, Quincy, MA 02169-7471 Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.org M E M O R A N D U M TO: FROM: NFPA Technical Committee on Merchant Vessels
Second Revision No. 3-NFPA [ Section No. 2.3 ]
![Second Revision No. 3-NFPA [ Section No. 2.3 ]](/thumbs/96/127511130.jpg "Second Revision No. 3-NFPA [ Section No. 2.3 ]")
Second Revision No. 3-NFPA 804-2014 [ Section No. 2.3 ] 2.3 Other Publications. 2.3.1 ASME Publications. American Society of Mechanical Engineers, Three Park Avenue, New York, NY 10016-5990. ASME Boiler
The following preprint is based on the First Revision Draft of the 2018 edition of NFPA 54/Z223.1.
Copyright 2016 by American Gas Association and the National Fire Protection Association, All Rights Reserved BSR Z223.1 20xx NFPA 54 20xx National Fuel Gas Code 2018 Edition NOTE: This preprint of the
1 of /3/ :03 PM. Public Input No. 1-NFPA 13D-2015 [ Chapter 2 ]
![1 of /3/ :03 PM. Public Input No. 1-NFPA 13D-2015 [ Chapter 2 ]](/thumbs/95/123561097.jpg "1 of /3/ :03 PM. Public Input No. 1-NFPA 13D-2015 [ Chapter 2 ]")
1 of 129 11/3/2016 12:03 PM Public Input No. 1-NFPA 13D-2015 [ Chapter 2 ] 2 of 129 11/3/2016 12:03 PM American Society of Mechanical Engineers Chapter 2 Referenced Publications 2.1 General. The documents
C. Manufactured double wall chimneys for fuel fired equipment. D. NFPA 54 - National Fuel Gas Code; National Fire Protection Association; 2009.
SECTION 235100 - BREECHINGS, CHIMNEYS, AND STACKS PART 1 GENERAL 1.1 SECTION INCLUDES A. Fabricated breechings. B. Manufactured chimneys for gas fired equipment. C. Manufactured double wall chimneys for
Completed Projects / Projets terminés
Completed Projects / Projets terminés New Standards New Editions Special Publications Gas Technician Training 2 Module 10, 3rd edition Piping and Tubing Systems for Industrial and Commercial Applications...
TABLE OF CONTENTS. Part I Administrative... 1
Part I Administrative............................ 1 CHAPTER 1 Deleted Part II Definitions.............................. 3 CHAPTER 2 DEFINITIONS.................... 3 R201 General..................................
NFPA 54 UPDATE. Paul Cabot American Gas Association
NFPA 54 UPDATE Paul Cabot American Gas Association PRESENTATION TOPICS Summary Listing Schedule Revisions Definitions/General Piping Appliances and Appliance Installation Venting 2015 Edition Revision
SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL-BURNING EQUIPMENT
CHAPTER 9 SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL-BURNING EQUIPMENT SECTION 901 GENERAL 901.1 Scope. This chapter shall govern the approval, design, installation, construction, maintenance, alteration
Adobe Connect - Invitation to NFPA 385 Second Draft Web Conference
Matthews, Diane Subject: Location: Start: End: Show Time As: Recurrence: Meeting Status: Organizer: Required Attendees: Adobe Connect - Invitation to NFPA 385 Second Draft Web Conference http://nfpa.adobeconnect.com/rpbmeet/
STANDARDS TASK GROUP REPORT
STANDARDS TASK GROUP REPORT THE SCOPE OF THE STANDARDS TASK GROUP INCLUDES ADDING CROSS- REFERENCES TO TABLE 14-1 AND RECOMMEND WHERE SUCH REFERENCES ARE APPLICABLE TO THE REFERENCED STANDARDS AND TO UPDATE
CHAPTER 8 CHIMNEYS AND VENTS
CHAPTER 8 CHIMNEYS AND VENTS SECTION 801 GENERAL 801.1 Scope. This chapter shall govern the installation, maintenance, repair and approval of factory-built chimneys, chimney liners, vents and connectors.
Internal Use Only INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR ELECTRICAL OR HIGH-DENSITY MAGNETIC ANTI-SCALE OR WATER CONDITIONING APPLIANCE IGC 91-2009 1. PURPOSE 1.1 The purpose
CHAPTER 14 REFERENCED STANDARDS TABLE REFERENCED STANDARDS STANDARD NUMBER STANDARD TITLE APPLICATION
CHAPTER 14 STANDARDS 1401.0 General. 1401.1 Standards. The standards listed in Table 1401.1 are intended for use in the design, testing, and installation of materials, devices, appliances, and equipment
Analysis of Changes for the 6 th Edition (2017) Florida Codes
Analysis of Changes for the 6 th Edition (2017) Florida Codes Changes to the Florida Building Code, Mechanical This Analysis of Changes for the 6 th Edition (2017) of the Florida Codes is intended to provide
SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL-BURNING EQUIPMENT
CHAPTER 9 SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL-BURNING EQUIPMENT SECTION 901 GENERAL 901.1 Scope. This chapter shall govern the approval, design, installation, construction, maintenance, alteration
SECTION PLUMBING EQUIPMENT
PART 1 GENERAL 1.1 SECTION INCLUDES A. Water heaters B. Packaged water heating systems C. Water storage tanks D. Water softeners E. Pumps F. Circulators 1.2 REFERENCES SECTION 22 30 00 PLUMBING EQUIPMENT
First Revision No. 82-NFPA [ Detail ] Submitter Information Verification Submitter Full Name: Organization:
![First Revision No. 82-NFPA [ Detail ] Submitter Information Verification Submitter Full Name: Organization:](/thumbs/80/80832484.jpg "First Revision No. 82-NFPA [ Detail ] Submitter Information Verification Submitter Full Name: Organization:")
of 176 1/25/2016 3:32 PM First Revision No. 82-NFPA 54-2015 [ Detail ] Title of 7.1: Installation of Underground Piping. Underground Title of 7.2: Installation of Aboveground Piping. Submittal Date: Thu
CHAPTER 80 REFERENCED STANDARDS
Part VI s CHAPTER 80 REFERENCED STANDARDS This chapter lists the standards that are d in various sections of this document. The standards are listed herein by the promulgating agency of the standard, the
GASEOUS HYDROGEN SYSTEMS
CHAPTER 7 GASEOUS HYDROGEN SYSTEMS SECTION 701 GENERAL 701.1 Scope. The installation of gaseous hydrogen systems shall comply with this chapter and Chapters 30 and 35 of the Fire Compressed gases shall
CHAPTER 14 REFERENCED STANDARDS TABLE REFERENCED STANDARDS PRE-PRINT. STANDARD NumBER STANDARD TiTLE APPLiCATioN
CHAPTER 14 STANDARDS Note: Referenced sections will be updated before publishing. 1401.0 General. 1401.1 Standards. The standards listed in Table 1401.1 are intended for use in the design, testing, and
SECTION (15530) - REFRIGERANT PIPING
SECTION 23 23 00 (15530) - REFRIGERANT PIPING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Tubes. 2. Fittings. 3. Joining Materials. 4. Specialties. B. Related Sections: 1. Section 07 92 00 (07920)
TABLE OF CONTENTS. Part I Administrative
Part I Administrative.......................... 1-1 CHAPTER 1 SCOPE AND ADMINISTRATION. 1-1 R101 General............................. 1-1 R102 Applicability......................... 1-2 R103 (Not adopted)........................
IMC Significant Changes Summary Tier I
2009-2015 IMC Significant Changes Summary Tier I 202 Environmental Air The definition of environmental air has been expanded through the addition of parking garage exhaust. 306.1 Access More than just
CUMULATIVE ANALYSIS OF UNIFORM MECHANICAL CODE CHANGES to 2003
CUMULATIVE ANALYSIS OF UNIFORM MECHANICAL CODE CHANGES 2000 to 2003 The following pages contain comments regarding the changes to the 2000 edition of the UNIFORM MECHANICAL CODE (UMC ) that were made to
2012 UPC STANDARDS TASK GROUP
2012 UPC STANDARDS TASK GROUP The scope of this task group is to review standard cross-references within the body of the 2009 Uniform Plumbing Code and Table 14-1. The objective is to update standards
COHASSET, MA March 6, The following is the HVAC outline specifications, which defines the scope of work of the HVAC system.
23 00 00 HEATING, VENTILATING & AIR-CONDITIONING The following is the HVAC outline specifications, which defines the scope of work of the HVAC system. PART 1 GENERAL 1.1 CODES A. All work installed under
Review of Residential Fire Sprinkler Systems for One- and Two-Family Dwellings
Review of Residential Fire Sprinkler Systems for One- and Two-Family Dwellings Reprinted with permission from NFPA 13D Installation of Sprinkler Systems in One- and two-family Dwellings and Manufactured
A NATIONAL SET OF HYDROGEN CODES AND STANDARDS FOR THE US
A NATIONAL SET OF HYDROGEN CODES AND STANDARDS FOR THE US Rivkin, C. 1, Blake, C. 1, Burgess, R. 1, Buttner, W. 1, and Post, M. 1 1 Hydrogen Technologies and Systems Center, National Renewable Energy Laboratory,
Fire Pump Specification
GPS Amsterdam Phase 2 Expansion Project No: 1703 Fire Pump Specification Rev. Description Date Issued by 00 First Issue 10-09-2017 1703-F02-403-001 GPS Amsterdam Phase 2 Expansion Table of Contents 1 F02-403-001
CHAPTER 14 REFERENCED STANDARDS TABLE 14-1 REFERENCED STANDARDS. Floor-Affixed Supports for Off-the-Floor Plumbing Fixtures for Public Use
CHAPTER 14 STANDARDS 1401.0 General. 1401.1 Standards. The standards listed in Table 14-1 are intended for use in the design, testing, and installation of materials, devices, appliances, and equipment
UNIFORM MECHANICAL CODE
INDEX Note: Content and section numbers will be updated before publishing. 2009 International Association of Plumbing and Mechanical Officials. All rights reserved. The copyright in this index is separate
Design and Construction Standards SECTION PLUMBING EQUIPMENT
SECTION 15450 PLUMBING EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES: A. Water heaters. B. Packaged water heating systems. C. Water storage tanks. D. Water softeners. E. Pumps. F. Circulators. 1.2 REFERENCES
MEMORANDUM. According to the final ballot results, all ballot items received the necessary affirmative votes to pass ballot.
National Fire Protection Association 1 Batterymarch Park, Quincy, MA 02169-7471 Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.org MEMORANDUM To: From: NFPA Technical on Laser Fire Protection Kimberly
SECTION GENERAL-SERVICE COMPRESSED-AIR SYSTEMS
PART 1 GENERAL 1.01 SECTION INCLUDES A. Pipe and Pipe Fittings. B. Air compressor. C. Air receiver and accessories. D. Aftercooler. E. Refrigerated air dryer. F. Pressure reducing station. 1.02 RELATED
MLA Architects Pierz Public Schools ISD #484 Healy High School Multi-Purpose & Choir Additions Pioneer Elementary School Class Room Addition Pierz, MN
DIVISION 21 - FIRE SUPPRESSION (REFER TO SECTION 23 05 00 FOR BASIC FIRE SUPPRESSION REQUIREMENTS) 21 05 00 Common Work Results for Fire Suppression 21 13 13 Wet-Pipe Sprinkler Systems END OF SECTION FIRE
Committee Input No. 5-NFPA [ Chapter 14 ]
![Committee Input No. 5-NFPA [ Chapter 14 ]](/thumbs/86/93336313.jpg "Committee Input No. 5-NFPA [ Chapter 14 ]")
http://submittalsnfpaorg/terraviewweb/contentfetcher?commentpara Committee Input No 5-NFPA 501-2015 [ Chapter 14 ] Chapter 14 Referenced Referenced Publications 14 1 General 1 General The documents or
SECTION HYDRONIC PIPING
SECTION 23 21 13 HYDRONIC PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes pipe and fitting materials, joining methods, special-duty valves, and specialties for the following: 1. Hot-water
Public Comment No. 16-NFPA 13D-2014 [ Section No ]
![Public Comment No. 16-NFPA 13D-2014 [ Section No ]](/thumbs/90/103297636.jpg "Public Comment No. 16-NFPA 13D-2014 [ Section No ]")
of 52 9/22/2014 9:20 AM Public Comment No. 16-NFPA 13D-2014 [ Section No. 2.3.3 ] 2.3.3 ASTM Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ASTM
DESIGN GUIDELINES SPLIT TYPE AIR TO AIR HEAT PUMPS PAGE 1 of 6
DESIGN GUIDELINES SPLIT TYPE AIR TO AIR HEAT PUMPS PAGE 1 of 6 1.1. REFERENCE STANDARDS 1.2. GENERAL 1.1.1. The units shall be listed by Electrical Testing Laboratories (ETL) and bear the ETL label. 1.1.2.
SECTION (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS
SECTION 22 34 00 (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS System shall provide a complete hot water return throughout the entire system with balancing (flow control) valves not less than 10 feet from
CHIMNEYS AND VENTS CHAPTER 8
CHAPTER 8 CHIMNEYS AND VENTS SECTION 801 GENERAL 801.1 Scope. This chapter shall govern the installation, maintenance, repair and approval of factory-built chimneys, chimney liners, vents and connectors.
First Revision No. 15-NFPA [ Chapter 2 ]
![First Revision No. 15-NFPA [ Chapter 2 ]](/thumbs/76/73953013.jpg "First Revision No. 15-NFPA [ Chapter 2 ]")
Page 1 of 28 First Revision No. 15-NFPA 91-2013 [ Chapter 2 ] Chapter 2 Referenced Publications 2.1 General. The documents or portions thereof listed in this chapter are referenced within this standard
SPECIFIC APPLIANCES CHAPTER 6
CHAPTER 6 SPECIFIC APPLIANCES SECTION 601 GENERAL 601.1 Scope. This chapter shall govern the approval, design, installation, construction, maintenance, alteration and repair of the appliances and equipment
CHAPTER 14 MANDATORY REFERENCED STANDARDS TABLE 14-1
CHAPTER 14 MANDATORY REFERENCED STANDARDS AHAM DW-1-92 Household Electric Dishwashers Appliances AHAM DW-2PR-92 Plumbing Requirements for Household Dishwashers Appliances AHAM FWD-1-92 Food Waste Disposers
MECHANICAL TESTING LABORATORY LIST OF APPROVED LISTING AND TESTING AGENCIES
City of Los Angeles Department of Building and Safety MECHANICAL TESTING LABORATORY LIST OF APPROVED LISTING AND TESTING AGENCIES November 21, 2017 Part I: Approved Listing Agencies Part II: Approved Testing
OHIO ADMINISTRATIVE CODE 1301: REFERENCED STANDARDS
OHIO ADMINISTRATIVE CODE 1301:7-7-80 This rule lists the standards that are d in various paragraphs of this code. Such standards shall be incorporated by into and considered part of the requirements of
VENTING GAS APPLIANCES NFPA 54 CODE
VENTING GAS APPLIANCES NFPA 54 CODE Better Buildings: Better Business Robert Parkhurst March 3, 2017 Objectives Standardize terminology Examine gas piping size and safety Simplify design rules Selection
MEMORANDUM. NFPA 51 First Draft Technical Committee FINAL Ballot Results (A2017 Cycle)
National Fire Protection Association 1 Batterymarch Park, Quincy, MA 02169-7471 Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.org MEMORANDUM TO: FROM: Technical Committee on Industrial and Medical Gases
DUCT SYSTEMS CHAPTER 6
SECTION 601 GENERAL 601.1 Scope. Duct systems used for the movement of air in air-conditioning, heating, ventilating and exhaust systems shall conform to the provisions of this chapter except as otherwise
COURSE SYLLABUS HVAC AND MECHANICAL CONSIDERATIONS FOR PART 3 BUILDINGS CORRESPONDENCE COURSE
COURSE SYLLABUS HVAC AND MECHANICAL CONSIDERATIONS FOR PART 3 BUILDINGS CORRESPONDENCE COURSE 100126 The course is organized into three bands. Band A covers HVACrelated building components and other types
CHAPTER 8 CHIMNEYS AND VENTS
CHAPTER 8 CHIMNEYS AND VENTS SECTION 801 GENERAL 801.1 Scope. This chapter shall govern the installation, maintenance, repair and approval of factory-built chimneys, chimney liners, vents and connectors.
B. Product Data: Provide manufacturers catalogue information. Indicate valve data and ratings.
DIVISION 21 21 05 00 COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, sleeves, escutcheons, seals, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS
Vent Supplement Ultra-80, -105, -155, -230 & -310
Gas-fired water boiler Vent Supplement Ultra-80, -105, -155, -230 & -310 Installation of: Vent piping Air piping with This document must only be used by a qualified heating installer/service technician.
Public Input No. 1-NFPA [ Global Input ] Statement of Problem and Substantiation for Public Input. Submitter Information Verification
![Public Input No. 1-NFPA [ Global Input ] Statement of Problem and Substantiation for Public Input. Submitter Information Verification](/thumbs/93/113334715.jpg "Public Input No. 1-NFPA [ Global Input ] Statement of Problem and Substantiation for Public Input. Submitter Information Verification")
Public Input No. 1-NFPA 36-2013 [ Global Input ] Revise the document to eliminate the use of "Exception" text. The use of "Exception" text is inconsistent with the Manual of Style. Exception text should
MECHANICAL TESTING LABORATORY LIST OF APPROVED LISTING AND TESTING AGENCIES
City of Los Angeles Department of Building and Safety MECHANICAL TESTING LABORATORY LIST OF APPROVED LISTING AND TESTING AGENCIES July 25, 2018 Part I: Approved Listing Agencies Part II: Approved Testing
REFRIGERANT PIPING
SECTION 232300 - REFRIGERANT PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
CHAPTER 9 SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL BURNING EQUIPMENT
CHAPTER 9 SPECIFIC APPLIANCES, FIREPLACES AND SOLID FUEL BURNING EQUIPMENT SECTION 901 GENERAL 901.1 Scope. This chapter shall govern the approval, design, installation, construction, maintenance, alteration
SECTION DUCTWORK
PART 1 GENERAL 1.1 REFERENCES SECTION 23 31 00 DUCTWORK A. ASHRAE - Handbook, Duct Design B. ASHRAE - Handbook, Duct Construction C. ASTM A90/A90M - Standard Test Method for Weight (Mass) of Coating on
AMENDMENTS TO THE BUILDING AND FIRE CODE FOR THE CITY AND COUNTY OF DENVER
AMENDMENTS TO THE BUILDING AND FIRE CODE FOR THE CITY AND COUNTY OF DENVER The 2016 Denver Building and Fire Code includes the following codes except as amendment herein. 2015 IBC (Building) 2015 IFC (Fire)
Public Input No. 1-NFPA 99B-2015 [ Section No. 2.3 ] Statement of Problem and Substantiation for Public Input. Related Public Inputs for This Document
![Public Input No. 1-NFPA 99B-2015 [ Section No. 2.3 ] Statement of Problem and Substantiation for Public Input. Related Public Inputs for This Document](/thumbs/72/66518590.jpg "Public Input No. 1-NFPA 99B-2015 [ Section No. 2.3 ] Statement of Problem and Substantiation for Public Input. Related Public Inputs for This Document")
1 of 19 10/21/2015 1:20 PM Public Input No. 1-NFPA 99B-2015 [ Section No. 2.3 ] 2.3 Other Publications. 2.3.1 ASME Publications. American Society of Mechanical Engineers, Three ASME International, Two
Public Input No. 1-NFPA [ Global Input ] Statement of Problem and Substantiation for Public Input. Related Public Inputs for This Document
![Public Input No. 1-NFPA [ Global Input ] Statement of Problem and Substantiation for Public Input. Related Public Inputs for This Document](/thumbs/96/127344595.jpg "Public Input No. 1-NFPA [ Global Input ] Statement of Problem and Substantiation for Public Input. Related Public Inputs for This Document")
of 79 1/27/2016 2:09 PM Public Input No. 1-NFPA 59-2015 [ Global Input ] Throughout standard remove references to the following and replace with the following: (1) ANSI/API and replace with API. (2) ANSI/UL
CHAPTER 5: EXHAUST SYSTEMS
MOTORS, FANS AND FILTERS 503.1 General. Motors and fans shall be sized to provide the required air movement. Motors in areas that contain flammable vapors or dusts shall be of a type approved for such
TABLE OF CONTENTS Board of Appeals General Limitations of Authority... 6 Table Mechanical Permit Fees...
TABLE OF CONTENTS CHAPTER 1 ADMINISTRATION............. 1 101.0 General....................... 1 101.1 Title.......................... 1 101.2 Scope........................ 1 101.3 Purpose......................
First Revision No. 6-NFPA 90A-2012 [ Chapter NFPA ] Submitter Information Verification. Committee Statement and Meeting Notes
![First Revision No. 6-NFPA 90A-2012 [ Chapter NFPA ] Submitter Information Verification. Committee Statement and Meeting Notes](/thumbs/74/70429273.jpg "First Revision No. 6-NFPA 90A-2012 [ Chapter NFPA ] Submitter Information Verification. Committee Statement and Meeting Notes")
First Revision No. 6-NFPA 90A-2012 [ Chapter NFPA ] 4.3.11.5.5 Materials within a raised floor plenum exposed to the airflow shall be (a) noncombustible or (b) exhibit a maximum flame spread index of 25
SPECIFIC APPLIANCES CHAPTER 6
CHAPTER 6 SPECIFIC APPLIANCES SECTION FGC 601 GENERAL 601.1 Scope. This chapter shall govern the approval, design, installation, construction, maintenance, alteration and repair of the appliances and equipment
Location of Requirements Listed Category I appliances Type B gas vent 12.7 Listed appliances equipped with. Chimney Single wall metal pipe 12.
2/18/2016 National Fire Protection Association Report Committee Input No. 70 NFPA 54 2015 [ Section No. 12.5 ] This was a First Revision that failed ballot. 12.5 Type of Venting System to Be Used. 12.5.1
UNIFORM MECHANICAL CODE SIGNIFICANT CHANGE COMPARISON STUDY
CHAPTER 1 ADMINISTRATION CHAPTER 1 SCOPE AND ADMINISTRATION 101.3.1.1 Conflicts Between Codes. New 101.3.3 Appendices. New 102.6 Existing Buildings. New 110.1 General. New 115.6.1 Corrections. New 117.0
Mercy Hospital of Buffalo Catholic Health System 2 nd Floor Patient Holding Center 3 rd Floor Locker Rooms Shaflucas Architects, PC Project No.
SECTION 22 63 13 GAS PIPING FOR LABORATORY AND HEALTHCARE FACILITIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
Gas Equipment. Volume 4 June/July Issue date: June 25, 2008
Gas Equipment Volume 4 June/July Issue date: June 25, Info Update is published by the Canadian Standards Association (CSA) eight times a year. It contains important information about new and existing standards,
[Change Section as follows:]
![[Change Section as follows:]](/thumbs/95/125503997.jpg "[Change Section as follows:]")
[Change Section 13-301.0 as follows:] SUBCHAPTER 13-3 REFERENCED STANDARDS AND ORGANIZATIONS SECTION 13-301 REFERENCED STANDARDS 13-301.0 General. The standards (Std), and portions thereof, which are referred
Chapter FUEL GAS CODE*
Chapter 19.09 FUEL GAS CODE* * Editors Note: Serial No. 2004-31, 1, adopted Oct. 11, 2004 amended Title 19 in its entirety to read as herein set out. See the editor's note at Tit. 19 and also the Code