+ 25% Blue Energy adiabatic panels SMART COOLING. will reduce up to 30% of your cooling systems energy consumption!

Transcription

1 Most effective energy saving technology available on the market. Blue Energy adiabatic panels SMART COOLING Increased cooling capacity + 2% will reduce up to 0% of your cooling systems energy consumption!

2 1. System operation Blue Energy is uses a unique and effective technology - adiabatic precooling panel SMART COOLING - to reduce the energy consumption of the air cooled HVAC equipment and to increase their efficiency up to 0% and increased cooling capacity + 2% Before reaching the heat exchanger, coil air stream is cooled on adiabatic panels using the spray water energy.this allows your conditioning equipment to consume significantly less power (up to 0%) to provide necessary cooling capacity. Lowering of outdoor air temperature ensures also possibility to produce substantially more cooling capacity (up to 2%). Water mist is created by sputtering through micro muzzles Warm air Cooled air Blue-Energy adiabatic panels Watch the video here! Electric energy consumption distribution in buildings The Blue-Energy increases the efficiency of cooling systems in the last years the outdoor temperature during summer time has considerably increased. The coolingsystems capacity very often has not been envisaged for such a change. That means that cooling systems are functioning exceeding their limits, which results in lack of cooling capacity and a sharp increase in energy consumption. Using Blue-Energy adiabatic panels Smart Cooling, your enterprise cooling systems will work efficiently even when temperature outdoors reaches +0 C. This technology can cool incoming air temperature in condenser as low as +20 C, resulting in up to 0% energy saving as system now is working in +20 not +0 C environment. 2. System benefits C 2 C 2 C 2 C 2 C Blue-Energy adiabatic panels C In summertime, cooling systems can consume up to 0% of energy in buildings. This cost can be reduced significantly with the SMART COOLING adiabatic precooling panel system. The return on investment with our system is months, and combined with a 6-month of warranty, the SMART COOLINGTM adiabatic precooling panel system is the best offered product in industry. Can be reduced even up to 0% by installing Blue Energy adiabatic panels Other % Blue-Energy adiabatic panel system opportunities: Freezers and air-conditioning 0-0% Light 20-0% Saves energy even up to 0% Increases cooling capacity even up to 2% 4.. Increases lifespan of cooling equipment Increases efficiency of cooling equipment Technology 20-2%. ROI in to 10 months 6. Protects equipme from overheating

3 2. Blue Energy products Membrane 4 The Blue-Energy adiabatic panel is situated in front of the heat emission condenser (coil) of the cooling equipment. - It provides shading, which prevents the impact of solar irradiation and ingress of direct sunbeams on - the heat emission radiator. The adiabatic panel works as self-cleaning filter, which protects the heat emission radiator from fur, hair and dust particles. By ensuring shading and cleanness of the condenser (coil) the general efficiency of the system may be improved by another -%. High pressure nozzles panel 2 Preparation of water In front of the Blue-Energy adiabatic panel water mist is created by sputtering through micro muzzles processed water drops in the size of microns. As the water evaporates immediately in front of the Blue-Energy adiabatic panel, the heat emission condenser (coil) remains practically dry and the temperature of the air entering the radiator is reduced to 20 С. To remove limestone molecules from the water, a patented linear Blue Energy system is used, which allows introducing the exact quantity of additive agents into the water, thereby efficiently preventing limestone formation. Pipes and nozzles are 100% protected from corrosion and the impact of other external factors. Pump station Pumping installation ensures constant water pressure for the formation of the water mist drops with a radius of microns. Control unit and energy monitoring Control module ensures automatic switching on and off. Installation switches on when the temperature rises over 2 С and when the cooling equipment is switched on.

4 4. System parameters CaCO NO CALCIUM CARBONATE RISK Water before it gets used in Blue Energy system is treated with BIOchemistry changing the structure of calcium carbonate molecule so that it does not stick to surfaces and does not create limestone any more. Special BIO component is added to the water to prevent corrosion as well The Blue-Energy adiabatic panels HIGHER COOLING EFFICIENCY with lower energy consumption. UV NO LEGIONELLA RISK System is equipped with UV lamps thus providing that all bacteria in water get killed including legionella. CONDENSER PROTECTION Condenser protection from deposition, dirt and direct rays of the sun is especially important for the cooling system. Membranes of Blue-Energy adiabatic panels protect the condenser of the cooling equipment. The cleaner the condenser of the cooling equipment is, the better the heat exchange and heat removal from the condenser processes take place, therefore condenser protection is of great importance. Protection ensures cooling equipment longevity and higher efficiency (EER). Adiabatic panels ensure air pre-cooling and prevent cooling equipment from overheating. INCREASED DURABILITY By using Blue-Energy adiabatic panel the cleanness of the heat emission radiators is preserved, thus, ensuring low exit temperatures and reduced pressure in the whole system. In such a way, servicing frequency and the number of emergency calls are considerably reduced, which may have a direct influence on the maintenance budget, not to mention safety and durability. EASY TO SET-UP The Blue-Energy adiabatic panel is delivered in a kit form, which can be installed both on new or already functioning equipment, for any air conditioner or cooling equipment model or manufacturer. It may be installed from the outside, without any impacts or changes in the interior and no effect on the manufacturers warranties. INCREASED SERVICE TIME In addition to air-cooling the Blue-Energy adiabatic panel decreases the basic pressure in the compressor. Decrease of pressure and temperature essentially increases service time of the compressor. Since the Blue Energy adiabatic panel considerably reduces excessively high discharge pressure and cooling cycle temperatures, the mechanical stress of the system is considerably reduced, which means safe exploitation and decreases the need for maintenance.

5 4 PLEASE CONTACT US! USA +1 (2) Europe + (71) Russia + 7 (901) UAE + (971) office@blue-energy.us More information on our website: Watch the video here! Recognitions and awards: Blue-Energy adiabatic panels SMART COOLING can be installed on all cooling systems of all major manufacturers.