Crimping Tools for Non - Insulated Terminals

Transcription

1 Crimping Tools for Non - Insulated Terminals T-100 T-112 T-122 H-100N H-104 NH-12 NH-21 8

2 Crimping Tools for Non - Insulated Terminals T-100 Ratchet hand tool for crimping small (0.4mm 2 ) terminals. The ratchet ensures a complete compression. T-112 T-122 H-100N General-purpose hand tool for crimping three sizes of terminals (1.25, 2 and 5.5 mm 2 ). The dies are marked "1.25", "2" and "5.5". Size "5.5" also crimps H2 type terminals. The ratchet Heavy duty ratchet hand tool for crimping 8mm 2 terminals. The forged head and straight slide construction ensure that the crimping force is applied precisely. The ratchet ensures a complete compression. Hydraulic hand tool for crimping 8, 14, 22, and 38 mm 2 terminals. Changing sizes is easy: release the head, switch the male crimping die and rotate the female die. All dies are clearly marked. The pump magnifies the force applied to the terminal. The sliding die ensures that the force is precisely applied to the terminal. H-104 Hydraulic hand tool for crimping 8, 14, 22, 38 and 60 mm 2 terminals. Changing sizes is easy: release the head, switch the male crimping die and rotate the female die. The pump magnifies the force applied to the terminal. The sliding die ensure that the force is precisely applied to the terminal. NH-12 Hydraulic crimping head for mid-range terminals (60, 80, 100 and 150 mm 2 ). Optional dies are available for 8, 14, 22, 38 and 60 mm 2 terminals. NH-21 Hydraulic crimping head for large terminals (150, 200 and 325 mm 2 ). Optional dies are available for 38, 60, 70, 80, 100 and 180 mm 2 terminals. Hydraulic operation and sliding die action ensures that the right amount of crimping force is applied precisely. 9

3 Crimping Tools for Pre-Insulated Terminals T-200 (0.40mm 2, Vinyl, ) T-212 (1.25mm 2, Vinyl, ) T-221N (2mm 2, Vinyl, ) T-232 (5.5mm 2, Vinyl & Nylon, ) T-240 (1.25mm 2, Nylon, ) T-250 (2mm 2, Nylon, ) 10

4 Crimping Tools for Pre-Insulated Terminals T-200 Ratchet hand tool for crimping 0.40mm 2 Vinyl the yellow handle clearly matches the yellow insulation of standard 0.40mm 2 terminals. T-212 Ratchet hand tool for crimping 1.25mm 2 Vinyl the red handle clearly matches the red insulation of standard 1.25mm 2 terminals. T-221N Ratchet hand tool for crimping 2mm 2 Vinyl the blue handle clearly matches the standard blue insulation of standard 2mm 2 terminals. T-232 Heavy-duty ratchet hand tool for crimping 5.5mm 2 Vinyl and Nylon insulated terminals. The forged head and straight slide construction ratchet ensure that the crimping force is applied precisely. The ratchet ensures a complete compression. T-240 Ratchet hand tool for crimping 1.25mm 2 Nylon the red handle clearly matches the red insulation of standard 1.25mm 2 terminals. T-250 Ratchet hand tool for crimping 2mm 2 Vinyl the blue handle clearly matches the standard blue insulation of standard 2mm 2 terminals. 11

5 Crimping Tools for Closed End Terminals T-441 (CE-1) T-422 (CE-2) T-432 (CE-5) T-241 (CE-8) 12

6 Crimping Tools for Closed End Terminals T-441 (CE-1) Special-purpose tool for crimping CE-1 size insulated closed-end terminals. The ratchet T-422 (CE-2) Special-purpose tool for crimping CE-2 size insulated closed-end terminals. The ratchet T-432 (CE-5) Special-purpose tool for crimping CE-5 size insulated closed-end terminals. The ratchet T-241 (CE-8) Special-purpose tool for crimping CE-8 size insulated closed-end terminals. The forged head and straight slide construction ensures that the crimping force is applied precisely. The ratchet 13

7 Tool - Solderless Terminal Cross Reference Table Terminals / Splices For Non-Insulated Terminals and Splices Ratchet Heavy Duty Hydraulic Type Nominal Size Applicable Wire mm 2 AWG # mm Non-Insulated Terminals & Splices Pre-Insulated Terminals & Splices ~ ~ ~ 0.72 T ~ ~ ~ 1.44 T-112 ( 1.25 ) ~ ~ ~ 1.82 T-112 ( 2 ) R-H (H2) 1.04 ~ ~ ~ 1.82 T-112 ( 5.5 ) ~ ~ ~ 2.4 T-112 ( 5.5 ) ~ ~ ~ 2.89 T-112 ( 5.5 ) ~ ~ 3.65 T ~ ~ ~ ~ ~ ~ ~ / ~ ~ / ~ ~ / ~ ~ / ~ ~ ~300MCM ~ ~350MCM ~ MCM ~ ~600MCM ~ ~ ~ ~ ~ ~ ~ ~ l ~ ~ ~ 10 l.82 ~ 2.89 H-100N (8) H-100N (14) H-100N (22) H-100N (38) Closed End Connectors (CE-1) 0.5 ~ ~ 1.75 (CE-2) 1.0 ~ ~ 3.0 (CE-5) 2.5 ~ ~ 6.0 (CE-8) 4.0 ~ ~

8 Tool - Solderless Terminal Cross Reference Table For Non-Insulated Terminals and Splices For Pre-Insulated Terminals and Splices For Closed-End Terminals Terminals / Splices Hydraulic Tool (die) Tool (die) Ratchet Heavy Duty Ratchet Heavy Duty Type Nominal Size R-H (H2) H-104 (8) NH-12 (opt. 8) Non-Insulated Terminals & Splices H-104 (14) H-104 (22) H-104 (38) H-104 (60) NH-12 (opt. 14) NH-12 (opt. 22) NH-12 (opt. 38) NH-12 (60) NH-21 (opt. 38) NH-21 (opt. 60) 70 NH-12 (opt. 70) NH-21 (opt. 70) NH-12 (80) NH-12 (100) NH-21 (opt. 80) NH-21 (opt. 100) NH-12 (150) NH-21 (150) NH-21 (opt. 180) 200 NH-21 (200) 325 NH-21 (325) T-200 T-212, T-240 Pre-Insulated Terminals & Splices T-221N, T-250 T-232 Closed End Connectors (CE-1) 0.5 ~ 1.75 (CE-2) 1.0 ~ 3.0 (CE-5) 2.5 ~ 6.0 (CE-8) 4.0 ~ 9.0 T-441 T-422 T-432 T

9 Hand Tool - Strip Terminal Cross Reference Table STA This tool is used mostly for small size terminals. Terminals can be crimped easily because of the opening of the crimping head. STB The crimping head of this tool is designed to trap the terminal being crimped. The head is very strong and can apply different amounts of force. T-632 T-632 is designed for crimping and terminals. Part No. Tool Drawing T T-334 T-330 T-331 T-355 T-313 T-356 T T-304 T T-310 T T-310 T-307 T-309 T-386 T-385 STA STB T-632 T-333 T-335 T-335 T-348 T-358 T-385 T