L / -014L / -015L

Transcription

1 L / -014L / -015L Halogen Desk Lamp Halogen Desk Lamp Operation and Safety Notes 6

2 Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. GB / IE Operation and Safety Notes Page 5

3

4

5 Table of Contents Introduction Proper use... Page 7 Included items... Page 7 Description of parts and features... Page 8 Technical data... Page 8 Safety advice... Page 9 Operation Using the lamp... Page 11 Replacing a bulb... Page 11 Cleaning and maintenance... Page 12 Disposal... Page 13 Information Guarantee... Page 13 Service... Page 14 Declaration of Conformity... Page 14 GB/IE 5

6 The following pictograms are used in these operating instructions / on the device: Read instruction manual! Observe warning and safety notes! Always keep the product out of reach of children. Caution electric shock! Risk of loss of life! Risk of loss of life by electric shock from damaged mains lead or mains plug! Risk of burns! 0,2 m Attach the lamp at a minimum distance of 0.20 mtr to the materials being lit. V W If protective glass is broken, replace prior to using the lamp again. Volt (AC) Watts (Effective power) Dispose of packaging and appliance in an environmentally friendly way! 6 GB/IE

7 Introduction Halogen Desk Lamp Introduction These operating instructions form a part of this product. They contain important information on safety, use and disposal. Make yourself familiar with all the operating instructions and safety advice for the product before use. Use the product only as described and for the indicated purpose. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it. Check that the correct mains voltage is available and that all the parts have been properly assembled before bringing into use. Proper use This lamp is designed for use indoors only, in dry and enclosed rooms. This product is intended for use in a private, domestic environment only. Other uses or modification of the product shall be considered as improper use and could lead to injury or damage. The manufacturer accepts no liability for loss or damage arising from improper use. Included items Check that all the items and accessories are present and that the lamp is in perfect condition immediately after unpacking. GB/IE 7

8 Introduction 1 x Halogen desk lamp 1 x Illuminant (G4 / 20 W) 1 x Operating instructions Description of parts and features 1 Lamp head 2 Adjustment lever 3 ON / OFF switch 4 Mains lead with mains plug 5 Telescopic arm 6 Screws 7 Lamp shade 8 Bulb Technical data Operating voltage: V, 50 Hz Protection class: Illuminant: G4 / 20 W, 12 V, 50 Hz (included in delivery) Wattage: max. 20 W (G4, 12 V ) Length of cable: approx. 1.8 m Material: Dimensions: plastic, metal, glass base: ø approx cm height (adjustable): approx cm 8 GB/IE

9 Introduction / Safety advice Model: L (blue) L (titanium) L (black) Safety advice The right to claim under the guarantee shall be rendered invalid in respect of damage caused by the non-observance of these operating instructions! No liability is accepted for consequent damage! No liability is accepted for damage to property or persons caused by improper handling or non-observance of the safety advice! RISK OF LOSS OF LIFE AND ACCIDENT TO INFANTS AND CHILDREN! Never leave children unsupervised with the packaging materials. Packaging materials present a suffocation hazard. Children often underestimate danger. Always keep the product out of reach of children. To avoid danger to life from electric shock Before connecting the lamp to the mains, always check it and the mains lead / plug 4 for any damage. Never use your lamp if you discover that it is damaged in any way. If the external flexible lead of this lamp becomes damaged, avoid danger and have it replaced by the manufacturer, his servicing agent or an equivalent electrical appliance repair specialist. GB/IE 9

10 Safety advice CAUTION! A damaged mains lead presents a serious danger to life from electric shock. In the event of damage, repairs or other problems with the lamp, please contact the Service Centre or an electrician. Never let the lamp come into contact with water or other liquids. Never open any electrical devices such as switches, fittings etc. or allow any object to be inserted into them. This sort of interference can lead to a serious danger to life from electric shock. Touch only the insulated part of the plug when connecting to or disconnecting from the mains supply. Before installation ensure that the available mains voltag e agrees with the operating voltage required for the lamp ( V ). To avoid danger of fire and injury DANGER OF INJURY! Check all bulbs and shades for damage immediately after unpacking. Do not fit a defective shade into the lamp. In this event contact the Service Centre for a replacement. DANGER OF BURNS! Ensure the lamp has been switched off and allowed to cool before you touch it. In this way you will avoid the danger of burns. Light bulbs develop a great deal of heat. Replace defective bulbs immediately. Before replacing the bulb, always remove the mains plug from the mains socket. Allow the lamp to cool for at least 15 minutes before replacing a defective bulb. 0,2 m DANGER OF FIRE! Always ensure that there is at least 0.2 m clear distance between the lamp and other items of furniture or furnishings. Do not allow any objects to cover the lamp. Fire can result from the development of too much heat. 10 GB/IE

11 Safety advice / Operation Position the lamp so that it is protected from moisture and dirt. Never leave the lamp operating unattended. Use the above-indicated bulbs only. CAUTION! RISK OF INJURY! If protective glass is broken, replace prior to using the lamp again. Operation Using the lamp Always ensure that there is at least 20 cm clear distance between the lamp and other items of furniture or furnishings. Unwind the mains cable 4 completely before use. Insert the mains plug 4 into the socket. Set the lamp head 1 to the desired height with the telescopic arm 5. Set the lamp head 1 in the desired position with the adjustment lever 2. CAUTION! DANGER OF BURNS! If the lamp is switched on, adjust the lamp head 1 with only the adjustment lever 2. Do not touch the lamp head 1. The lamp head 1 gets very hot when the lamp is switched on. Set the ON / OFF switch 3 into position I to switch on the device. Set the ON / OFF switch 3 into position 0 to switch off the device. Replacing a bulb c CAUTION! DANGER TO LIFE FROM ELECTRIC SHOCK! Pull the mains plug 4 out of the socket. GB/IE 11

12 Operation / Cleaning and maintenance Note: To do this you will require a crosshead screwdriver. Allow the bulb 8 to cool down completely. Note: Ensure that the lamp shade 7 does not fall out when the last screw 6 is released. Screw out the screws 6 in the direction and completely remove all the glass-retainers. Remove the lamp shade 7. Draw the defective bulb 8 out of the socket. Use a clean, fluff-free cloth when you are replacing a bulb. Then insert a new bulb (max. 20 W) into the socket. Note: Ensure that the pins are correctly engaged in the socket. Place the lamp shade 7 back into the recess. Screw in the screws 6 in the direction. Note: Ensure that the brackets of the glass-retainers rest properly against the lamp shade 7. Cleaning and maintenance c CAUTION! DANGER TO LIFE FROM ELECTRIC SHOCK! Before cleaning, always pull out the mains plug 4 out of the socket. Do not use solvents such as petrol and the like as they could damage the lamp. For electrical safety reasons, never clean the lamp with water or other fluids or immerse it in water. Use a dry, fluff-free cloth for cleaning. The lamp is maintenance-free. 12 GB/IE

13 Disposal / Information Disposal The packaging consists entirely of environmentally friendly materials. They can be disposed of at your local recycling facility. The symbol of the wheelie bin with a cross through It means that, in the European Union, the product has to be disposed of in a separate refuse collection. This applies to the product and to all components bearing this symbol. Products marked in this way may not be disposed of with normal domestic waste but have to be handed in at a recycling collection point for electrical and electronic appliances. Recycling helps to reduce the consumption of raw materials and to ease the burden on the environment. Information Guarantee You receive a 36 month warranty on this product, valid from the date of purchase. The device has been carefully produced under strict quality control. Within the warranty period we shall rectify without charge all material and manufacturing defects. In the event of a defect arising during the warranty period, please send the device to the listed Service Centre address, making reference to the following article number: L, L, L. Wear parts (such as bulbs) and damage caused by improper handling, non-observance of the operating instructions or unauthorised interference are excluded from the warranty. GB/IE 13

14 Information The performance of services under the warranty does not extend or renew the warranty period. Service Briloner Leuchten GmbH Im Kissen 2, Brilon, Germany Tel.: +49 (0) / Fax: +49 (0) / Info@briloner.de Declaration of Conformity This product fulfils the requirements of the applicable European and national directives (Electromagnetic Compatibility 2004 / 108 / EC, Low Voltage Directive 2006 / 95 / EC). Conformity has been demonstrated. The relevant declarations and documents are held by the manufacturer. 14 GB/IE

15 15

16 16

17 IAN Briloner Leuchten GmbH Im Kissen Brilon (Germany) by ORFGEN Marketing Last Information Update: 06 / 2011 Ident.-No.: L /-014L/-015L