HOOD TYPE MACHINE HOOD 130S

Size: px
Start display at page:

Download "HOOD TYPE MACHINE HOOD 130S"

Transcription

1 HOOD TYPE MACHINE HOOD 130S , , , IInstallation and Operation Manual COD.: 3100ES_U Ed /2010

2 Thank you for choosing our machine. The instructions for installation, maintenance and use found on the following pages have been prepared to ensure a long life and perfect operation of your unit. Please, do follow the instructions carefully. We have designed and built this machine using the latest innovative technologies. Now you shall take good care of it. Your full satisfaction is our greatest reward.

3 TRANSLATION OF THE ORIGINAL INSTRUCTION EN CONTENTS Page WARNINGS MACHINE DESCRIPTION Machine Description Machine features OPERATION Control panel and relative symbols Machine start-up Start-up Operation Switching OFF Detergent use Rinse aid use Drain pump system (optional) Regeneration device (optional) 35 WARNINGS ECOLOGICAL ASPECTS Recommendations for optimal use of energy, water and additives H.A.C.C.P. AND HYGIENE REGULATIONS MAINTENANCE Routine maintenance Extraordinary Maintenance by qualified Service Personnel MACHINE INSTALLATION Handling Handling the product Storage Prepare for installation Room features Electrical connection - Characteristics Water supply connection - Characteristics Steam evacuation Installation Positioning the machine Electrical connection Water connection Start-up SIGNALS AND ALARMS ENVIRONMENTAL ASPECTS Packaging Disposal TROUBLESHOOTING 45 READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLING THE MACHINE. WARNING: FAILURE TO COMPLY, EVEN PARTIALLY, WITH THE PRESCRIP- TIONS IN THIS MANUAL WILL RENDER THE PRODUCT WARRANTY NULL, AND THE MANUFACTURER SHALL NOT BE LIABLE. page 25

4

5 WARNINGS This instruction booklet must be kept with the machine for future consultation. If this machine is sold or transferred to other users, make sure the booklet always goes with the unit so that the new owner can have all the necessary information on operations and all relevant instructions. The instruction booklet must be carefully read before installation and before starting the machine. These instructions are supplied to safeguard the users in compliance with Directive 2006/95/ CE as amended and the harmonized product Technical Standard EN and EN THE CONNECTION TO THE ELECTRICAL AND WATER NETWORKS, FOR INSTALLING THIS UNIT, MUST BE CARRIED OUT BY QUALIFIED OPERATORS ONLY. The user shall not carry out any repair and/or maintenance operations. In any case contact qualified personnel. Only qualified personnel can access the control panel, when the main power switch is OFF. Servicing of this machine must be performed by authorized personnel only. N.B.: Use genuine spare parts only. Non-genuine parts will void the warranty and the manufacturer will take no responsibility for any damage. Follow the instructions given in the manufacturer s booklet for cleaning operations (chap.5). This machine must only be used by adults. This is a professional machine to be used by qualified personnel, installed and repaired exclusively by qualified Technical Personnel. The Manufacturer declines any responsibility for improper installation, use, maintenance or repair. The appliance shall not be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. Children must be attended and shall stay away from this machine. NOTE: The manufacturer declines any responsibility for accidents to people or any damage deriving from failure to observe the above listed instructions. page 27

6

7 1. MACHINE DESCRIPTION 1.1 Machine Description Hood Wall-hung main power switch: at installation serviceman supply and care, according to local laws Control panel Standard equipment: nr. 1 glasses rack Standard equipment: nr. 2 plates racks Capacity per plate rack: 12 soup plates or 18 fl at plates Max Ø = 400 mm Standard equipment: 1 cutlery basket Optional: Water drain pump Optional: Water softener page 29

8 To operate the Hood machine, 3 connections are needed: Electrical; Water supply; Water drain. This is a cycle machine comprising a 55 C wash cycle with detergent, a 85 C rinse cycle with injection of rinse-aid in the boiler hull. 50x50 cm racks are used. The machine can be complemented with wash-tables, rinse-showers and dedicated waste collection systems. A new wash cycle can be started by closing the hood down. This machine is designed exclusively for washing dishes, glasses and various pots and pans with human food type of residue. Any other use is deemed improper. DO NOT wash articles polluted with petrol, paint, chips of steel or iron, fragile objects or material not resistant to the washing process. Do not use acidic corrosive chemical products or alkaline and solvents or chlorine based detergents. Do not open the machine hood when operating. In any case, the machine has a special safety device which immediately stops the unit if the hood is open, thus preventing water spillage. Always switch the machine completely off and drain the water tank, before accessing inside. The optional drain pump is used to keep the correct water level in the wash tank and drain it, in case the drain connection is higher than the machine water discharge pipe itself. 1.2 Machine features The machine has a noise level below 70 db. Total power Power supply Total absorption Pump power Electrical protection rate Protection rate page 30

9 2. 2. OPERATION 2.1 Control panel and relative symbols Pict. 1 A - Cycle light indicator B - Full tank indicator C - Salt shortage indicator D - Heating tank indicator E - Heating boiler indicator F - START key to start up cycle / Programming key G - Switching ON / OFF / Programming key H - Info (temperature / software review / key factory) I - Regeneration key (optional) / Decrease L - Drain Pump key (optional) / Increase M - Display 2.2 Machine start-up Start-up Check if the pump suction filter is properly inserted in its seat in the wash-tank bottom (see pict. 2). This filter must be cleaned every 20 wash-cycles or whenever necessary. DO NOT use the appliance without the filter. Insert the overflow pipe in its seat inside the pump suction filter (see pict. 2). If supplied, put the surface filters in place (see pict. 2). Shut the dishwasher hood. Turn the water valve open. Turn the main power switch ON. The display "M" will show, for a few seconds, the installed software version code. The machine is on "STAND-BY". In the "M" display, the message "STAND-BY" will appear. Pict. 2 stand-by page 31

10 Turn the button "G". The LED positioned below the G control, will light (green color) at the machine s start (when the machine is on "STAND-BY" mode, the LED will turn red). The display "M" will read "FILLING WATER". FILLING WATER The display will read "HEATING", till wash-tank and boiler will reach the set temperatures. HEATING Should the machine be fed with hot water supply (50 C), the heating process will take some 10 minutes. Should the machine be fed with cold water supply (10 C), the heating process will take some minutes. The display M will read the set wash-tank and boiler temperatures. 55 º C - 85 º C At this stage, the water intake starts Operation Insert the rack filled with dishes to wash. The plates must be correctly placed in the rack (see pict. 3). Select the wanted washing cycle by pushing the START button "F"; the display will show in sequence all these available programs. Once the wanted program is displayed, do release the button. SHORT CYCLE MEDIUM CYCLE Pict. 3 page 32

11 LONG CYCLE INTENSIVE CYCLE XX CYCLE Close the hood: the wash cycle starts automatically. The indicator "A" will start flashing. All wash-time long the display will read the wash-tank temperature and the boiler temperature. Below the temperatures indications line-bar is displayed to show the progression of the wash-cycle. 55 º C - 85 º C %%%%%% At the end of the washing cycle, a hot rinse cycle will take place. When the cycle is completed, the display M will indicate the "CYCLE ENDED". CYCLE ENDED NB: At cycle-end, keeping the hood closed, dishes will not dry. Take out the rack or keep the hood open to allow evaporation, helping the drying of the dishes. When opening the hood the message "CYCLE ENDED" disappeared. The machine is now ready for the next wash-cycle. We recommend to change water at least twice a day, or whenever needed Switching OFF Turn the button "G". The display will show "STAND-BY". STAND-BY To drain completely the wash-tank, remove the surface filter (if present) and take off the overflow pipe. For machines equipped with drain pump see chap At the end of the day, clean the machine (see chap. 5 "Maintenance"). Shut the water valve. Switch the main power switch OFF. page 33

12 DETERGENT RINSE AID 2.3 Detergent use The detergent shall be the NO FOAM type, suitable for industrial dishwashers and must comply with the EN /A11 norms. The use of good quality liquid detergents is recommended. The detergent shall be placed in the sump. Follow the manufacturer s recommendations for chemical dosage, related to the local water hardness. The machine can be ordered with an adjustable automatic detergent dispenser (always recommended). 1cm. of the product drawn into the tube is equal to about 0.15 g. A correct amount of detergent is very important for a successful wash. 2.4 Rinse aid use The machine has a standard rinse aid dispenser. The machine automatically sucks the product. The rinse-aid chemical, shall be suitable for professional glass and dishwashers and must comply with the EN /A11 norms. The recommended amount is 2-5 cm of product measured on the suction hose. 1 cm of the product drawn into the hose is equal to about 0.13g. A correct amount of rinse aid is very important for a quick and proper drying. NB: Excessive amount of chemicals or foam will reduce wash pump effi ciency. 2.5 Drain pump system (optional) To drain completely the wash-tank keep the machine OFF, extract the overfl ow pipe and shut the hood. After that, press the key "L" fi till the display will show "TANK DRAINING". TANK DRAINING The discharge pump will automatically drain the wash-tank. After the draining is complete, the machine will turn automatically in "STAND-BY" mode. STAND-BY If you want to refi ll the machine for a new cycle, see chap The drain pump will operate also during the rinse cycle, to drain the water in excess from the wash tank. page 34

13 SALt 2.6 Regeneration device (Optional only on standard machines) Should the machine be equipped with a water-softener circuit, this will be fully automatic. The circuit board is designed to call periodically for a 20 min. regeneration cycle (based upon the set water hardness). This regeneration cycle can also be activated by the user, should the rinse quality be dissatisfactory. When on the M display the LED below the I key fl ashes or when the users want to activate the cycle, R regeneration cycle, start the following procedure: When on the M display the C key fl ashes, fi ll the special container, placed on the inside of the tank, with coarse salt (0,500 kg mm. grains), being careful not to spill it into the sump. A strong concentration of salt can negatively affect the correct functioning and service life of the machine and generate rust and the steel oxidation. After fi lling with salt, lock the plug tightly. With the machine in "STAND-BY" mode, the water valve open, the wash-tank empty and the hood shut, press the "I" button. The LED under the I key lights on. The display "M" will show "REGENERATION". REGENERATION This cycle cannot be interrupted and the normal operation is inhibited. At the cycle end, the machine will switch in "STAND-BY" mode, automatically. stand-by At this moment, it is possible to start a normal operation phase(see Operation). In case of water hardness above 35 f an external water softener is recommended. page 35

14 WARNINGS: Do not slam the hood when opening and closing. Do not put material or objects on the hood. The machine has an IPX3 protection rating against accidental water splashes and is not protected against pressurized water jets. Pressure-cleaning systems shall, therefore, not be used on this machine. Do not dip bare hands into water containing detergent. If this should occur, wash them immediately with plenty of water. Check the safety instructions on the detergent container. Some important rules must be followed for using this appliance: 1) never touch the appliance with wet hands or feet; 2) never use the appliance when barefooted; 3) do not install the appliance in places exposed to water splashes. This machine must be disconnected from the main electrical supply after use at the end of the day and for any service/maintenance operation. Switch off the main switch located on the wall, which shall be installed by a professional installer. Shut the water supply valve(s). Do not cover the intake or dissipation grids. Do not use water to extinguish fires on electrical parts. WARNING: INTERNAL CLEANING OF THE MACHINE SHALL BE CARRIED OUT AT LEAST 10 MINUTES AFTER THE POWER SWITCH HAS BEEN TURNED OFF. WARNING: DO NOT INSERT HANDS AND/OR TOUCH THE PARTS LOCATED AT THE BOTTOM OF THE WASH TANK AND/OR AT THE END OF THE WASH CYCLE. page 36

15 3. ECOLOGICAL ASPECTS 3.1 Recommendations for optimal use of energy, water and additives Salt dosing A pre-set (by the manufacturer) quantity of salt is injected in the resins at each regeneration cycle. It is important to observe the number of regeneration cycles recommended in paragraph 2.6 "Regeneration device" in order to avoid salt spills or lime deposits. Use the machine fully loaded when possible. This shall prevent detergent, rinse aid, water and energy consumption waste. Detergent and rinse-aids Use detergents and rinse-aid chemicals with high biodegradability, to best respect the environment. Verify proper dosage in relation to water hardness at least three times a year. Excess product pollutes rivers and seas while an insuffi cient dose results in unsatisfactory dish washing and/or hygiene. Boiler and Wash-Tank temperatures The boiler and tank temperatures are set by the manufacturer in order to obtain the best washing results with detergents on the market. The temperatures can be reset by the installer in relation to your detergent. Pre-washing Carefully pre-wash with a moderate amount of water at room temperature to facilitate the removal of animal fats. To remove encrusted materials warm water soaking is recommended. Note: Wash objects as soon as possible to avoid deposits from drying and compromise effective washing. For effective washing routine dishwasher cleaning and maintenance is advised (see chap. 5). Disregarding the points listed above and of any the information contained in this manual can cause energy, water and detergent waste with a subsequent increase in running costs and/or performance reduction. 4. H.A.C.C.P. AND HYGIENE REGULATIONS When starting the machine ON, no wash-cycle will be starting until the set boiler and wash-tank temperatures are reached. During operation, the machine will not start the rinse cycle till the set boiler temperature is reached. Remove carefully all solids from the objects to be washed, to avoid obstruction of fi lters, nozzles and piping. Drain the wash tank and clean the fi lters at least twice a day. Check if the detergent and rinse-aid dosage are correct (as recommended by the manufacturer). In the morning, before starting the machine, check that the quantity of chemicals in the canisters is enough for daily supply. Keep your working tables clean. Extract the rack with clean hands or gloves to avoid fi nger marks. Do not dry or polish the washed objects with cloths, brushes or rags that are not sterile. page 37

16 5. MAINTENANCE 5.1 Routine maintenance WARNING: The machine is not protected against pressurized water jets. Do not use pressure cleaning system against the machine. It is recommended to contact the seller of chemicals for proper cleaning instructions, in order to have detailed indications on methods and products for the correct periodical machine sanitation. Do not use bleach or chlorine based detergents. Daily cleaning is needed to ensure that the machine runs perfectly. The following shall be carried out: Turn the machine in "STAND-BY" mode, by pressing the push-button "G" of the control panel (see chap. 2). STAND-BY Remove the surface fi lter (if present) and clean with a brush and a water shower. Drain the water by removing the overfl ow pipe. For machines equipped with drain pump, follow all indication at chap Remove the pump fi lter and clean with a brush and a water shower. Remove the arms by loosening the fi xing screws, and thoroughly clean them, and the nozzles under running water. Reassemble the parts and reposition the wash pipes fi rmly in place. Clean the tank very carefully, using a water shower. It is recommended to leave the machine hood open at the end of the day. Automatic cycle of machine self-cleaning/rinsing: recommended at each day end. The machine should be in "STAND-BY" mode. Remove the overfl ow pipe. Wait the tank to be totally empty and close the hood. For machines equipped with drain pump, follow all indication at chap STAND-BY page 38

17 Push START button "F"; the display "M" will show "SELF-CLEANING". SELF-CLEANING An automatic cycle of 30 seconds will start, after this the machine will be in "STAND-BY" mode. STAND-BY Shut the water valve. Turned off the machine by switching the main power switch OFF. 5.2 Extraordinary Maintenance by qualified Service Personnel At least once per year, the machine should be supervised by qualifi ed Service Personnel: 1 Clean the solenoid-valve(s) fi lters. 2 Remove scale from the heating elements. 3 Control the status of the seals. 4 Control for components integrity and/or consumption. 5 Control the dispenser(s) effi ciency; 6 Check the effi ciency of the door safety switch. A qualifi ed electrician, should check all electric connections inside the machine, at least once a year. page 39

18 6. MACHINE INSTALLATION 6.1 Handling Handling the product The machines must be handled strictly as shown in pict. 4 regarding the grip points indicated for lifting with a lift truck. Latch the machine in a way that secures no vibration or shocks during transportation. N.B.: Slinging with ropes not recommended. After unpacking, make sure the appliance has not been damaged due to transportation. If it has been, do notify the seller about this problem. If the damage might question the machine s safety, do not install the appliance. See chapter 8 for disposal of the packing material. Pict Storage Storage temperature: min. +4 C - max +50 C - humidity <90%. The stored parts should be checked periodically, to detect any sign of deterioration. Do not put anything on the machine, even if packed in its box. 6.2 Prepare for installation This is just a guide-line for the machine installation. The installation must be performed by a qualified engineer Room features Install the machine, in a room closed to weather and with a guaranteed temperature-range between 5 and 35 C. The machine is equipped with thermostatic sensors to manage the temperatures. To guarantee a proper functionality these sensor shall not operate at a room temperature below 5 C. For this reason, it is fundamental that before starting the machine reaches the room temperature. page 40

19 Tab Electrical connection - Characteristics The electrical connection to network shall be carried out in accordance to the local laws in force. Make sure that the supply voltage is the same as reported on the machine plate and that the network can stand the needed power absorption shown on the same plate. Make sure that the facility is equipped with efficient ground connection. A suitable omni-polar, one-way switch shall be installed and sized according to the absorption provided, with a contact opening of at least 3 mm. This switch shall be solely and exclusively used for this purpose and installed in the immediate vicinity of the machine, installed in full respect of the local laws. Always turn the machine off via this switch. This is the only model of switch that guarantees a total electrical power disconnection Water supply connection - Characteristics Water characteristics table Min Max Static Pressure 200Kpa 600Kpa Dynamic Pressure* 150Kpa 400Kpa Water hardness** 5 f 8 f Cold water-supply temperature 5 C 15 C Hot water-supply temperature*** 45 C 50 C *Should the water supply pressure be more than 400 kpa, a pressure reducer must be installed (only for those versions where it is not a standard supply, already). **It is compulsory to install a water-softener, in case of water with average hardness above 8 f. Washed objects will be cleaner and the machine will last much longer. The machine can be equipped with a water softener, on request. If the machine is equipped with a water-softener, a regeneration of the resins shall be done on regular basis (see par. 2.6). Note: Any damage caused by limestone (calcareous water higher-up than 8 F and without water-softener) will not be covered by warranty. A periodical check of the supplied water hardness is highly recommended. ***The water supply temperature shall never exceed 55 C. The drain tube shall always be connected to a siphon in order to prevent the release of odors. Maximum drain height = cm Steam evacuation In accordance with regulations of environmental hygiene, for the proper functioning of the machine and a healthy environment for the operator who working in there, it should be at least 10 air volume changes per hour in the room where the machine is installed. For small wash rooms we recommend at least 15 air volume changes per hour. 6.3 Installation Positioning the machine Remove the packing with care. Lift the machine as described in chap " Handling the product". Position the machine as shown on the installation diagram (lay-out) approved at the time of the offer. Maintain a minimum distance of about 50 mm from the walls, so that motors are ventilated. Install suction hoods to assure proper ventilation of the room, in order to eliminate steam and excessive humidity. Check that the machine is properly levelled, by adjusting the legs. Make sure the machine is not standing on the power cable or on the filling/drain hoses. Level the machine flat, by adjusting the support feet. page 41

20 6.3.2 Electrical connection The electrical connection shall be carried out in accordance to the local laws in force. Moreover, the machine has a clamp at the back indicated by the symbol that is meant to connect the metal structure and masses among different apparatuses, to prevent electro-static electrical shocks. The electrical supply cable must be new, flexible, and according to "har" H07RN-F or a local valid equivalent. The cable size is dimensioned according to the power. Should the electrical supply cable get damaged it shall be changed by the Manufacturer, or his Authorized Service, or other technician with equivalent qualification, to prevent any risk. If the machine is fitted with a three-phase pump, check the correct motor rotation (right rotation as per Pict. 5 arrow on the casing). This is not needed if the pump is a single-phase model Water connection Connect the machine draining hose to the connection located under the tank, making sure that the water flows freely (optimizing the slope). Should not be possible to drain the water at a level lower than the appliance outlet (see pict. 6), it's advisable to choose a machine provided with a drain pump. In those machines equipped with water softener the water supply temperature shall not exceed 40 C, to avoid damages to the filters resins. The drain tube shall always be connected to a siphon in order to prevent the release of odors Start-up At installation engineer s care. Pict. 6 page 42

21 7. SIGNALS AND ALARMS The alarm messages are displayed, based upon their meaning. When on the M display the LED below the I key flashes a total regeneration is needed (only on machines equipped with optional water softener). When on the M display the C light flashes, the salt-container in the wash tank needs refill with salt (only on machines with optional water softener). When displaying "SHUT HOOD" means that the open hood does not allow the maneuver tried, or a wash cycle was in progress, when lifting the hood. When displaying "DRAIN WATER IN WASH TANK" means that a full wash-tank does not allow the manoeuvre tried. When displaying "LOAD WATER IN WASH-TANK" means that the wash-tank is empty and does not allow the manoeuvre tried. TYPE OF ALARM CAUSE REMEDIES B1 BOILER FILLING FAIL Open the water supply valve and check the overflow pipe B2 BOILER PROBE FAIL. Contact Technical Service B3 BOILER HEAT. ALARM Contact Technical Service B4 RINSING FAILED Contact Technical Service B5 BOILER OVERHEATING Contact Technical Service E1 WATER LOAD FAILED Open the water supply valve and check the overflow pipe E2 TANK PROBE FAIL. Contact Technical Service E3 TANK HEATING ALARM Contact Technical Service E5 TANK OVERHEATING Contact Technical Service E6 TANK DRAINING FAIL. Check the overflow pipe. Contact Technical Service Z9 REGENERATION FAIL Contact Technical Service Table 3 page 43

22 8. ENVIRONMENTAL ASPECTS 8.1 Packaging Packaging is made of the following components: a wooden pallet; a nylon sack (LDPE); a multi-layer carton; polystyrene (PS) strips; polypropylene (PP) banding. All above materials, shall be disposed and treated in accordance with the Local Laws in force. 8.2 Disposal The symbol WEEE/RAEE used on this product indicates that it cannot be treated as domestic waste. Proper disposal of this product contributes to protecting the environment. For more information on product recycling, contact the local authorities, domestic waste authorities or the dealer where the product was purchased. For product or parts disposal, follow the Council directives 2002/95/EC and 2002/96/EC as amended and/or application legislative decrees. The present product or parts cannot be disposed of as urban waste but shall be collected in separate containers (see the waste bin on wheels symbol with an X on the product). At the time of product disposal, the user shall refer to the waste electrical and electronic equipment (WEEE/RAEE) specification. The manufacturer guarantees the absence of dangerous substances in the EEA used in conformity to the directive 2002/95/EC. If the user does not comply with the regulations he/she shall be subject to the penalties foreseen by each member state. Disconnect electricity and water before disposal. Cut away the electrical cable to ensure that further use is impossible. All metal parts are recyclable as they are made of stainless steel. Recyclable plastic parts are marked with the plastic material symbol. page 44

23 9. TROUBLESHOOTING Type of Problem Possible Causes Cure The machine does not turn Main switch not ON. Turn switch ON. on. The machine does not load water. Water valve shut. Open the hot and/or cold water valve. The display will flash "ALARM" Washing results are unsatisfactory. Glasses or dishes are not properly dried. Streaks and spots on glasses and dishes. The machine suddenly stops during operation. The machine stops during the wash stage and starts refilling water. Rinse area nozzles or solenoid-valve filter blocked and/or scaled with limestone. Defective pressure-switch. Replace pressure-switch. See chapter 7 "Alarms". --- The washing nozzles are obstructed or the rack does not rotate. Foam is present. Fats or starches not removed. Filters are dirty. Check tank temperature (which must be between 50 C and 60 C). Wash time insufficient for the type of dirt. Wash water is dirty. Not enough rinse aid. The rack is not suitable for the pots or the tools. The washed items may have been sitting in the wash chamber too long. Rinse temperature under 80 C. Surface of dishes and glasses too rough or porous for material wear. Too much rinse-aid chemical. Too hard water. For appliances with softener: too little salt in the salt container or the resins have not been properly regenerated. Salt present in dishwasher sump. The machine is connected to an overload device. A machine safety device was triggered. The previous day's water was not changed. Excessive water temperature in tank. Defective pressure switch. Overflow pipe improperly positioned. Clean the rinse arm nozzles, conductors and solenoid-valve filter. Check that the water hardness is <10 f. Clean the nozzles carefully, and check the right positioning of the wash-arm, tightening firmly. Use no-foam detergents or reduce the dose in use. Check the rinse-aid dosage. Insufficient detergent concentration. Remove filters, clean with brush under a jet of water and replace in original position. Adjust the thermostat or check correct heating element operation. Select a longer wash-cycle, if possible, otherwise repeat the wash cycle. Drain the tank water, clean the filters; refill the tank and replace the filters correctly. Increase dosage by turning the dispenser screw (see par. "Rinse aid dispenser"). Use the suitable rack which gives the pots and tools an inclined position so that water can rinse away. As soon as the cycle stops, remove the rack with pots and tools so that they can dry more quickly in the air. Check the boiler thermostat temperature. Replace type of dishes and glasses used. If the dirt on the dishes is dry and old, soak before washing. Reduce the rinse aid amount by turning the micrometric dispenser screw (see par. 1.4 "Rinse aid dispenser"). Check the water quality. Water must not exceed 8 f in hardness. Fill the salt container (coarse salt: 1-2 mm grains) and regenerate the resins more often. If lime deposits are also observed on the body of the machine, have a qualified technician check the operation of the water softener. Thoroughly clean and rinse the appliance, and avoid spilling salt when filling the container. Connect the machine on a own overload device (call Service). Check the electrical devices (call Service). Drain the tank totally and refill. Call Service to check thermostat and pressure-switch. Remove and reposition the overflow pipe properly. N.B.: For any other question, please contact your Service provider. The manufacturer has right to modify any technical characteristics without prior notice. page 45

INSTALLATION & OPERATION Rev 1.00A DISTRIBUTED EXCLUSIVELY BY CMA DISHMACHINES KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841

INSTALLATION & OPERATION Rev 1.00A DISTRIBUTED EXCLUSIVELY BY CMA DISHMACHINES KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 MODEL UC 60e INSTALLATION & OPERATION Rev 1.00A DISTRIBUTED EXCLUSIVELY BY CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854- 6417 FAX 714-895-2141 www.cmadishmachines.com TABLE

More information

3. Before switching the equipment on, make sure that the model plate data conforms to that of the electrical and water distribution network.

3. Before switching the equipment on, make sure that the model plate data conforms to that of the electrical and water distribution network. Manuale di istruzione per lavastoviglie Notice d utilisation pour lave-vaisselle Gebrauchsanweisung für Geschirrspüler Instruction manual for dishwashers Manual de instrucciones para lavavajillas LF315

More information

RC411 Operator Manual

RC411 Operator Manual RC411 Operator Manual Page 1 of 14 FOREWORD 1. Read the instructions contained in the enclosed booklet carefully, because it contains important information on installation, operation and maintenance safety.

More information

Glass and Dishwashers AMX / AUX Series

Glass and Dishwashers AMX / AUX Series Glass and Dishwashers AMX / AUX Series INSTALLATION OPERATION REV. 8.xx 04.07.2005 Installation and Operation Instructions for Models of AMX / AUX Series Content Page 1 Installation... 3 2 Connections...

More information

11/2012. Mod: D281/EKA-NP. Production code:

11/2012. Mod: D281/EKA-NP. Production code: 11/2012 Mod: D281/EKA-NP Production code: 916658 INSTRUCTION MANUAL FOR DISHWASHERS UK CONTENTS CHAP 1 PREFACE... 2 CHAP 2 INSTALLATION... 2 2.1 UNPACKING... 2 2.2 POSITIONING... 3 2.3 ELECTRICAL CONNECTION...

More information

Glass and Dishwashers AMX / AUX Series

Glass and Dishwashers AMX / AUX Series Glass and Dishwashers AMX / AUX Series INSTALLATION OPERATION VERSION 24.02.04 Important Notes Use in Accordance with Regulations This machine is exclusively to be used to wash ware such as plates, cups,

More information

All spares available from. System-Matic Ltd

All spares available from. System-Matic Ltd All spares available from System-Matic Ltd 0844 272 0556 Copyright Notice: All rights reserved. No parts of this manual may be reproduced in any form without express written permission of Maidaid-Halcyon

More information

INDUSTRIAL GLASS AND DISHWASHER USERS MANUAL - -

INDUSTRIAL GLASS AND DISHWASHER USERS MANUAL - - - - INSTRUCTION MANUAL MOD. ST FOR USER - ENGLISH - INDUSTRIAL GLASS AND DISHWASHER, UNDERCOUNTER TYPE Dear Customer, LETTER TO THE USER This dishwasher does not exhibit any operating risk for the operator

More information

HX-30/40 and HX-30/40 S Glass and Dishwashers

HX-30/40 and HX-30/40 S Glass and Dishwashers HX-30/40 and HX-30/40 S Glass and Dishwashers INSTALLATION OPERATION VERSION 18/01/00 2 Installation and Operation Instructions for Model HX-30/40 and HX-30/40 S (with built-in softener) Content Page 1

More information

Operating instructions

Operating instructions Operating instructions for Winterhalter Gastronom dishwasher GS 502 and GS 515 Contents Page 1 Intended use... 1 2 Installation and commissioning... 1 3 Safety instructions... 2 4 Operating panel... 3

More information

Glass and Dishwashers 402/452/502. (original instructions) (incl. Australian /502) Starting from Serial No.:

Glass and Dishwashers 402/452/502. (original instructions) (incl. Australian /502) Starting from Serial No.: Glass and Dishwashers ECOMAX 402/452/502 (incl. Australian 452-90/502) INSTALLATION AND OPERATION INSTRUCTIONS (original instructions) Starting from Serial No.: 8663 4000 REV. 05.10.2015 EN IMPORTANT NOTES

More information

Installation & User Guide

Installation & User Guide Installation & User Guide All spares available from The Engine Shed Top Station Road Brackley NN13 7UG Tel: 0845 1308060 Fax: 01280 845345 Web: www.caterparts.com Copyright Notice: All rights reserved.

More information

Installation & User Guide

Installation & User Guide Installation & User Guide All spares available from The Engine Shed Top Station Road Brackley NN13 7UG Tel: 0845 1308060 Fax: 01280 845345 Web: www.caterparts.com Copyright Notice: All rights reserved.

More information

BarAid 400. Installation and. Starting from Serial No.:

BarAid 400. Installation and. Starting from Serial No.: Glasswasher BarAid 400 Installation and operation Instructions Starting from Serial No.: 8649 1065 REV. 19.01.2009 DE 1618-A-01-09 Content Page 1 Important Notes... 4 2 Installation... 5 2.1 Location...

More information

AUTOMATIC GRANULAR ICE FLAKER

AUTOMATIC GRANULAR ICE FLAKER AUTOMATIC GRANULAR ICE FLAKER INSTRUCTIONS AND WARNINGS 24480 rev. 01 It is strictly forbidden to reproduce this instruction manual or any part thereof. Dear Customer, Congratulations on choosing a

More information

Glass and Dishwashers. BarAid 500/800. Installation and. Starting from Serial No.:

Glass and Dishwashers. BarAid 500/800. Installation and. Starting from Serial No.: Glass and Dishwashers BarAid 500/800 Installation and operation Instructions Starting from Serial No.: 8652 0001 REV. 19.01.2009 1617-A-01-09 Content Page 1 Important Notes... 4 2 Installation... 5 2.1

More information

AUTOMATIC ICE-CUBE MAKER - INSTRUCTIONS AND WARNINGS

AUTOMATIC ICE-CUBE MAKER - INSTRUCTIONS AND WARNINGS AUTOMATIC ICE-CUBE MAKER - INSTRUCTIONS AND WARNINGS Dear Customer, Congratulations on having chosen a quality product which will certainly fully meet your expectations. Thank you for having purchased

More information

User Manual. Dishwasher ZDM17301SA ZDM17301WA

User Manual. Dishwasher ZDM17301SA ZDM17301WA EN User Manual Dishwasher ZDM17301SA ZDM17301WA Contents Safety information 2 Safety instructions 3 Product description 4 Control panel 5 Programmes 6 Daily Use 7 Hints and tips 10 Care and cleaning 11

More information

AUTOMATIC ICE-CUBE MAKER

AUTOMATIC ICE-CUBE MAKER AUTOMATIC ICE-CUBE MAKER INSTRUCTIONS AND WARNINGS 24478 ed. 11-2007 It is strictly forbidden to reproduce this instruction manual or any part thereof. Dear Customer, Congratulations on having chosen

More information

AUTOMATIC MODULAR ICE-CUBE MAKER WITH VERTICAL EVAPORATOR SYSTEM

AUTOMATIC MODULAR ICE-CUBE MAKER WITH VERTICAL EVAPORATOR SYSTEM AUTOMATIC MODULAR ICE-CUBE MAKER WITH VERTICAL EVAPORATOR SYSTEM INSTRUCTIONS AND WARNINGS 24481 ed. 11-2007 It is strictly forbidden to reproduce this instruction manual or any part thereof. Dear

More information

Installation & User Guide

Installation & User Guide Installation & User Guide All spares available from The Engine Shed Top Station Road Brackley NN13 7UG Tel: 0845 1308060 Fax: 01280 845345 Web: www.caterparts.com Copyright Notice: All rights reserved.

More information

MODULAR AUTOMATIC GRANULAR ICE FLAKER

MODULAR AUTOMATIC GRANULAR ICE FLAKER MODULAR AUTOMATIC GRANULAR ICE FLAKER INSTRUCTIONS AND WARNINGS 24479 rev. 03 It is strictly forbidden to reproduce this instruction manual or any part thereof. Dear Customer, Congratulations on having

More information

User Instruction Book. for INDESIT. Dishwasher. Model: DI 6

User Instruction Book. for INDESIT. Dishwasher. Model: DI 6 User Instruction Book for INDESIT Dishwasher Model:. DI 6 Safety Is a Good Habit to Get Into NOTICE Carefully read the instructions contained in this manual, as they provide important information which

More information

COMBY 4000 & 9000 STEAM CLEANER OPERATOR MANUAL

COMBY 4000 & 9000 STEAM CLEANER OPERATOR MANUAL COMBY 4000 & 9000 STEAM CLEANER OPERATOR MANUAL Clemas & Co. Unit 5 Ashchurch Business Centre, Alexandra Way, Tewkesbury, Gloucestershire, GL20 8NB. Tel: 01684 850777 Fax: 01684 850707 Email: info@clemas.co.uk

More information

AUTOMATIC MODULAR ICE-CUBE MAKER

AUTOMATIC MODULAR ICE-CUBE MAKER AUTOMATIC MODULAR ICE-CUBE MAKER INSTRUCTIONS AND WARNINGS 24851 ed. 06-2012 It is strictly forbidden to reproduce this instruction manual or any part thereof. Dear Customer, Congratulations on having

More information

MW001 Integrated Dishwasher. Manual for Installation, Use and Maintenance

MW001 Integrated Dishwasher. Manual for Installation, Use and Maintenance MW001 Integrated Dishwasher Manual for Installation, Use and Maintenance Important The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product.

More information

Pro6 Duo. Stampa Novaprint - Tel cod USER MANUAL

Pro6 Duo. Stampa Novaprint - Tel cod USER MANUAL Pro6 Duo Stampa Novaprint - Tel.0424-539449 - www.novaprint.it cod.10161031310 USER MANUAL 9. Troubleshooting PROBLEM CAUSE SOLUTION Boiler fails to heat up. Device not plugged in. Button 3 and/or 4 not

More information

Dishwashers. 1 electrolux dishwashers. Undercounter, Hood type, Pot and pan, and Rack Conveyor

Dishwashers. 1 electrolux dishwashers. Undercounter, Hood type, Pot and pan, and Rack Conveyor Dishwashers 1 electrolux dishwashers Undercounter, Hood type, Pot and pan, and Rack Conveyor 2 electrolux dishwashers Hood type and Undercounter dishwashers Hood type and Undercounter dishwashers are the

More information

Read this manual through carefully before installing/using the cleaner, paying special attention to the SAFETY INSTRUCTIONS

Read this manual through carefully before installing/using the cleaner, paying special attention to the SAFETY INSTRUCTIONS PW1370TD 2 EN Read this manual through carefully before installing/using the cleaner, paying special attention to the SAFETY INSTRUCTIONS 3 E3 E1 C3 A1-A2-A3-A4 B4 B1 B5 B2 C1 B3 D 1 4 1 2 3 4 5 6 7 Ø13

More information

Rack conveyor dishwashing machine STR. Operating instructions

Rack conveyor dishwashing machine STR. Operating instructions Rack conveyor dishwashing machine STR Operating instructions Operating Instructions for Winterhalter STR Rack Conveyor Dishwashing Machine (translation of the original German operating instructions) Table

More information

MW402 Integrated Dishwasher

MW402 Integrated Dishwasher MW402 Integrated Dishwasher Manual for Installation, Use and Maintenance 1 Customer Care Department The Group Ltd. Harby Road Langar Nottinghamshire NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu

More information

INSTRUCTIONS FOR USE... 2

INSTRUCTIONS FOR USE... 2 5095109600 Rev. 1 19-03-2012 825440 INSTRUCTIONS FOR USE... 2 De Longhi Australia Pty Ltd ABN 49 104 012 857 Po Box 4540 Casula Mall NSW 2170 Australia Phone: 1800 126 659 Fax: 1800 007 289 www.kenwood-australia.com

More information

User Manual. Dishwasher IDSH604W

User Manual. Dishwasher IDSH604W EN User Manual Dishwasher IDSH604W Contents Safety information 2 Safety instructions 3 Product description 4 Control panel 5 Programmes 5 Settings 6 Before first use 8 Safety information Daily use 9 Hints

More information

Tornado Operations & Maintenance Manual

Tornado Operations & Maintenance Manual TORNADO INDUSTRIES 7401 W. LAWRENCE AVENUE CHICAGO, IL 60706 (708) 867-5100 FAX (708) 867-6968 www.tornadovac.com Tornado Operations & Maintenance Manual MODEL NO. 99690 BD 22/14, 99720 BD 26/14 L9722

More information

All spares available from. The Engine Shed Top Station Road Brackley NN13 7UG Tel: Fax: Web:

All spares available from. The Engine Shed Top Station Road Brackley NN13 7UG Tel: Fax: Web: All spares available from The Engine Shed Top Station Road Brackley NN13 7UG Tel: 0845 1308060 Fax: 01280 845345 Web: www.caterparts.com Copyright Notice: All rights reserved. No parts of this manual may

More information

GB User and maintenance manual

GB User and maintenance manual GB User and maintenance manual IMPORTANT SAFETY INSTRUCTIONS These instructions shall also be available on website: docs.whirlpool.eu. YOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT This manual and

More information

Index. page 8. 1 Description of appliance. Description of accessories. page 4. 3 Precautions for use. page 5. 4 Getting started

Index. page 8. 1 Description of appliance. Description of accessories. page 4. 3 Precautions for use. page 5. 4 Getting started Index 1 Description of appliance page 2 2 Description of accessories page 3 3 Precautions for use 4 Getting started page 4 page 5 5 Practical use of the accessories page 5 6 Continuous refilling page 6

More information

BEFORE USING THE DISHWASHER/CONNECTIONS

BEFORE USING THE DISHWASHER/CONNECTIONS INSTRUCTIONS FOR USE BEFORE USING THE DISHWASHER/CONNECTIONS ELECTRICAL CONNECTION PRECAUTIONS AND GENERAL RECOMMENDATIONS HOW TO FILL THE SALT CONTAINER HOW TO FILL THE RINSE AID DISPENSER HOW TO FILL

More information

MW401 Integrated Dishwasher

MW401 Integrated Dishwasher MW401 Integrated Dishwasher Manual for Installation, Use and Maintenance Customer Care Department The Group Ltd. Harby Road Langar Nottinghamshire NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu

More information

GETTING STARTED? EASY.

GETTING STARTED? EASY. User Manual GETTING STARTED? EASY. ZDT24003FA EN User Manual Dishwasher SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is

More information

HEALTH & SAFETY AND INSTALLATION GUIDE

HEALTH & SAFETY AND INSTALLATION GUIDE IMPORTANT TO BE READ AND OBSERVED Before using the appliance, read these safety instructions. Keep them nearby for future reference. These instructions and the appliance itself provide important safety

More information

wc431 Slimline Integrated Dishwasher Manual for Installation, Use and Maintenance

wc431 Slimline Integrated Dishwasher Manual for Installation, Use and Maintenance wc431 Slimline Integrated Dishwasher Manual for Installation, Use and Maintenance Contents Contents... 2 Important... 3 Important Notes... 4 Recommendations... 5 Before First Use... 5 Control Panel...

More information

CHH30 Dishwasher. Wiring Diagram. Spare Parts List. Installation / Operation

CHH30 Dishwasher. Wiring Diagram. Spare Parts List. Installation / Operation CHH30 Dishwasher Installation / Operation Spare Parts List Wiring Diagram jw-06-2006 GB USE AND MAINTENANCE MANUAL Pag. 1 CONTENTS CHAP. 1 INTRODUCTION... 3 CHAP.2 INSTALLATION... 3 2.1 HANDLING AND UNPACKING...

More information

SPECIFICATION, INSTALLATION AND OPERATION MANUAL UNDER BENCH GLASS WASHER EVO40ST

SPECIFICATION, INSTALLATION AND OPERATION MANUAL UNDER BENCH GLASS WASHER EVO40ST SPECIFICATION, INSTALLATION AND OPERATION MANUAL READ ALL INSTRUCTIONS BEFORE USE UNDER BENCH GLASS WASHER EVO40ST A guide on the use, care and maintenance of your quality Culinaire product Rev: C - 02/11/2018

More information

HR 601 C A AUS. ENGLISH Instructions for use Page 2

HR 601 C A AUS. ENGLISH Instructions for use Page 2 HR 61 C A AUS ENGLISH Instructions for use Page 2 1 INSTRUCTION FOR USE IMPORTANT SAFETY INSTRUCTIONS BEFORE USING THE GLASS CERAMIC HOB INSTALLATION ELECTRICAL CONNECTIONS ENERGY SAVING TIPS SAFEGUARDING

More information

Instructions for use

Instructions for use Instructions for use These instructions are also available on the website: www.kitchenaid.eu Important instructions for safety 4 Installation 6 Safeguarding the environment 6 Troubleshooting guide 7 After-sales

More information

GETTING STARTED? EASY.

GETTING STARTED? EASY. User Manual GETTING STARTED? EASY. ZDF26001WA ZDF26001XA EN User Manual Dishwasher SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer

More information

WC141 Integrated Dishwasher Installation, Use and Maintenance

WC141 Integrated Dishwasher Installation, Use and Maintenance WC141 Integrated Dishwasher Installation, Use and Maintenance Customer Care Department The Group Ltd. Harby Road Langar Nottinghamshire NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu

More information

Contents. 1. Description of the controls 2 2. Operating instructions Cleaning and maintenance Troubleshooting 28

Contents. 1. Description of the controls 2 2. Operating instructions Cleaning and maintenance Troubleshooting 28 Contents 1. Description of the controls 2 2. Operating instructions 11 3. Cleaning and maintenance 23 4. Troubleshooting 28 Thank you for choosing one of our products. You are advised to read this manual

More information

SAFEGUARDING THE ENVIRONMENT IMPORTANT NOTES BEFORE USING THE OVEN OVEN ACCESSORIES CARE AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER SALES SERVICE

SAFEGUARDING THE ENVIRONMENT IMPORTANT NOTES BEFORE USING THE OVEN OVEN ACCESSORIES CARE AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER SALES SERVICE INSTRUCTIONS FOR USE SAFEGUARDING THE ENVIRONMENT IMPORTANT NOTES BEFORE USING THE OVEN OVEN ACCESSORIES CARE AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER SALES SERVICE To make the most of your new oven,

More information

AUTOMATIC MODULAR ICE FLAKER

AUTOMATIC MODULAR ICE FLAKER AUTOMATIC MODULAR ICE FLAKER INSTRUCTIONS AND WARNINGS 24479 rev. 08 It is strictly forbidden to reproduce this instruction manual or any part thereof. 1 5 3 4 Mod. N. V. W 2 2 M8 18 8 18 M8 M8 3 ~ 200

More information

IMPORTANT Read this manual thoroughly before using the appliance. This will ensure optimum results and maximum safety.

IMPORTANT Read this manual thoroughly before using the appliance. This will ensure optimum results and maximum safety. GB IMPORTANT Read this manual thoroughly before using the appliance. This will ensure optimum results and maximum safety. Save these instructions for future reference. IMPORTANT SAFEGUARDS Read the following

More information

ESF7540ROX. EN Dishwasher User Manual

ESF7540ROX. EN Dishwasher User Manual ESF7540ROX EN Dishwasher User Manual 2 www.electrolux.com CONTENTS 1. SAFETY INFORMATION...3 2. SAFETY INSTRUCTIONS...4 3. PRODUCT DESCRIPTION... 5 4. CONTROL PANEL... 6 5. PROGRAMMES... 7 6. SETTINGS...8

More information

GETTING STARTED? EASY.

GETTING STARTED? EASY. User Manual GETTING STARTED? EASY. ZDT21006FA EN User Manual Dishwasher SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is

More information

Safety Is a Good Habit to Get Into

Safety Is a Good Habit to Get Into Safety Is a Good Habit to Get Into NOTICE Carefully read the instructions contained in this manual, as they provide important information which is essential to safe and proper installation, use and maintenance

More information

INSTALLATION INSTRUCTIONS: these are intended for the qualified technician who must carry out the installation, hook-up and testing of the appliance.

INSTALLATION INSTRUCTIONS: these are intended for the qualified technician who must carry out the installation, hook-up and testing of the appliance. Contents 1. Safety and operating instructions 2 2. Installation and hook-up 14 You are advised to read this manual carefully; it contains all the information you need about the right conditions for the

More information

Glass- and Dishwashers. Ecomax 602/612. Installation and operation instructions. (original instructions) Starting from Serial No.:

Glass- and Dishwashers. Ecomax 602/612. Installation and operation instructions. (original instructions) Starting from Serial No.: Glass- and Dishwashers Ecomax 602/612 Installation and operation instructions (original instructions) Starting from Serial No.: 8657 3000 REV. 23.12.2010 important notes contents Page Use in Accordance

More information

GETTING STARTED? EASY.

GETTING STARTED? EASY. User Manual GETTING STARTED? EASY. ZDF22017WA EN User Manual Dishwasher SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is

More information

SAFEGUARDING THE ENVIRONMENT IMPORTANT NOTES BEFORE USING THE OVEN OVEN ACCESSORIES CARE AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER SALES SERVICE

SAFEGUARDING THE ENVIRONMENT IMPORTANT NOTES BEFORE USING THE OVEN OVEN ACCESSORIES CARE AND MAINTENANCE TROUBLESHOOTING GUIDE AFTER SALES SERVICE 31002018GB.fm Page 11 Tuesday, December 2, 2008 10:29 PM INSTRUCTIONS FOR USE SAFEGUARDING THE ENVIRONMENT IMPORTANT NOTES BEFORE USING THE OVEN OVEN ACCESSORIES CARE AND MAINTENANCE TROUBLESHOOTING GUIDE

More information

Before loading dishes into the baskets, remove coarse food remains: e.g. bones, fish bones etc. that may block the filter, or damage the wash pump.

Before loading dishes into the baskets, remove coarse food remains: e.g. bones, fish bones etc. that may block the filter, or damage the wash pump. FOR THE FIRST TIME: 1. Set the water hardness. This will ensure optimum wash performance. Contact your local water board to find out the water hardness of the area in which you live. Adjust the dishwasher

More information

Dear Customer, Congratulations on having chosen a top-quality product, which is sure to live up to your expectations. Thank you for having purchased one of our products. Please read this instruction manual

More information

FFE62620PM FFE62620PW. User Manual Dishwasher USER MANUAL

FFE62620PM FFE62620PW. User Manual Dishwasher USER MANUAL FFE62620PM FFE62620PW EN User Manual Dishwasher USER MANUAL 2 www.aeg.com CONTENTS 1. SAFETY INFORMATION... 2 2. SAFETY INSTRUCTIONS...4 3. PRODUCT DESCRIPTION...6 4. CONTROL PANEL... 7 5. PROGRAMMES...8

More information

Carmen. Operating Instructions. 1

Carmen. Operating Instructions.  1 Carmen Operating Instructions Streamline Supplies 9 Joseph Baldwin Place, Shepparton Victoria Ph: Fax: www.streamlinesupplies.com.au Introduction Please read this technical handbook carefully since it

More information

Slimline Dishwasher Instruction Manual

Slimline Dishwasher Instruction Manual Slimline Dishwasher Instruction Manual Model Number: RHSLDW1 Please read these instructions carefully and keep them for future reference For Customer Services, Spare Parts & Manufacturer s Warranty Information,

More information

User Manual GV25 GV35 GV702. Company information: Original instructions GV12066 (1)

User Manual GV25 GV35 GV702. Company information:   Original instructions GV12066 (1) User Manual Original instructions GV25 GV35 GV702 Company information: www.vipercleaning.eu info-eu@vipercleaning.com GV12066 (1) 2012-04-10 USER MANUAL ENGLISH TABLE OF CONTENTS Introduction... 4 Manual

More information

ESL5205LO. EN Dishwasher User Manual

ESL5205LO. EN Dishwasher User Manual ESL5205LO EN Dishwasher User Manual 2 www.electrolux.com CONTENTS 1. SAFETY INFORMATION...2 2. SAFETY INSTRUCTIONS...4 3. PRODUCT DESCRIPTION... 5 4. CONTROL PANEL... 6 5. PROGRAMMES... 6 6. SETTINGS...7

More information

DAILY REFERENCE GUIDE PRODUCT DESCRIPTION APPLIANCE CONTROL PANEL. Before using the appliance carefully read Health and Safety guide.

DAILY REFERENCE GUIDE PRODUCT DESCRIPTION APPLIANCE CONTROL PANEL. Before using the appliance carefully read Health and Safety guide. DAILY REFERENCE GUIDE EN THANK YOU FOR BUYING A HOTPOINT PRODUCT. In order to receive a more complete assistance, please register your appliance on: www.hotpoint.eu/register You can download the Safety

More information

Air always contains a certain amount of water in the form of vapour. This determines the

Air always contains a certain amount of water in the form of vapour. This determines the Useful information on humidity Air always contains a certain amount of water in the form of vapour. This determines the level of humidity in an atmosphere. The capacity of the air to hold water vapour

More information

Tornado Operations & Maintenance Manual

Tornado Operations & Maintenance Manual Tornado Industries, LLC 333 Charles Court West Chicago, IL 60185 www.tornadovac.com Tornado Operations & Maintenance Manual MODEL NO. 99414 Form No. L9740AB Tornado Industries, LLC. All rights reserved

More information

User Manual Dishwasher F55402VI0P

User Manual Dishwasher F55402VI0P EN User Manual Dishwasher F55402VI0P 2 www.aeg.com CONTENTS 1. SAFETY INFORMATION...3 2. SAFETY INSTRUCTIONS... 4 3. PRODUCT DESCRIPTION... 5 4. CONTROL PANEL...6 5. PROGRAMMES... 7 6. OPTIONS... 8 7.

More information

ESL 5201LO EN DISHWASHER USER MANUAL

ESL 5201LO EN DISHWASHER USER MANUAL ESL 5201LO EN DISHWASHER USER MANUAL 2 www.electrolux.com CONTENTS 1. SAFETY INFORMATION... 2 2. SAFETY INSTRUCTIONS...4 3. PRODUCT DESCRIPTION... 5 4. CONTROL PANEL...6 5. PROGRAMMES...6 6. SETTINGS...

More information

GAISER 4000 STEAM CLEANER OPERATOR MANUAL

GAISER 4000 STEAM CLEANER OPERATOR MANUAL GAISER 4000 STEAM CLEANER OPERATOR MANUAL Clemas & Co. Unit 5 Ashchurch Business Centre, Alexandra Way, Tewkesbury, Gloucestershire, GL20 8NB. Tel: 01684 850777 Fax: 01684 850707 Email: info@clemas.co.uk

More information

FAVORIT34502VIO. EN User Manual

FAVORIT34502VIO. EN User Manual FAVORIT34502VIO EN User Manual 2 www.aeg.com CONTENTS 1. SAFETY INFORMATION...3 2. SAFETY INSTRUCTIONS... 4 3. PRODUCT DESCRIPTION... 6 4. CONTROL PANEL...6 5. PROGRAMMES... 7 6. SETTINGS... 8 7. BEFORE

More information

WC600 Integrated Dishwasher Installation, Use and Maintenance

WC600 Integrated Dishwasher Installation, Use and Maintenance WC600 Integrated Dishwasher Installation, Use and Maintenance Customer Care Department The Group Ltd. Harby Road Langar Nottinghamshire NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu

More information

MANUAL FOR USE AND MAINTENANCE LSC Rev Ed. 11/2011

MANUAL FOR USE AND MAINTENANCE LSC Rev Ed. 11/2011 ANTI STILI...UNA PASSIONE espresso coffee machines MANUAL FOR USE AND MAINTENANCE LSC 022 - Rev. 00 - Ed. 11/2011 WEEE espresso coffee machines Disposal of the equipment by the users within the European

More information

Operating Instructions

Operating Instructions ZLQ WHU K OWHU Operating Instructions Winterhalter Gastronom Glasswasher GS 24 Summary 1. Application 2. Installation and initial start-up 3. Safety instructions for the operator 4. General information

More information

GETTING STARTED? EASY.

GETTING STARTED? EASY. User Manual GETTING STARTED? EASY. ZDF21001WA ZDF21001XA ZDF21001NA EN User Manual Dishwasher SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions.

More information

FSK73400P. User Manual Dishwasher USER MANUAL

FSK73400P. User Manual Dishwasher USER MANUAL FSK73400P EN User Manual Dishwasher USER MANUAL 2 www.aeg.com CONTENTS 1. SAFETY INFORMATION... 2 2. SAFETY INSTRUCTIONS...4 3. PRODUCT DESCRIPTION...5 4. CONTROL PANEL... 6 5. PROGRAMMES...7 6. SETTINGS...9

More information

IMPORTANT WARNINGS Therefore, to avoid breaking it, do not turn it manually in order to seek the correct position.

IMPORTANT WARNINGS Therefore, to avoid breaking it, do not turn it manually in order to seek the correct position. IMPORTANT WARNINGS Before use check that the voltage power supply corresponds to the one shown on the appliance data plate. Only connect the appliance to electrical sockets which have a minimum load of

More information

ESL7550RO. EN Dishwasher User Manual

ESL7550RO. EN Dishwasher User Manual ESL7550RO EN Dishwasher User Manual 2 www.electrolux.com CONTENTS 1. SAFETY INFORMATION...3 2. SAFETY INSTRUCTIONS...4 3. PRODUCT DESCRIPTION... 6 4. CONTROL PANEL... 7 5. PROGRAMMES... 7 6. SETTINGS...9

More information

INSTRUCTIONS AND ADVICE FOR THE USE, INSTALLATION AND MAINTENANCE OF BUILT-IN ELECTRIC HOBS

INSTRUCTIONS AND ADVICE FOR THE USE, INSTALLATION AND MAINTENANCE OF BUILT-IN ELECTRIC HOBS INSTRUCTIONS AND ADVICE FOR THE USE, INSTALLATION AND MAINTENANCE OF BUILT-IN ELECTRIC HOBS Dear Customer, Thank you for having purchased one of our products. We are certain that this new, modern, functional

More information

FSS52610Z. User Manual Dishwasher USER MANUAL

FSS52610Z. User Manual Dishwasher USER MANUAL FSS52610Z EN User Manual Dishwasher USER MANUAL 2 www.aeg.com CONTENTS 1. SAFETY INFORMATION... 2 2. SAFETY INSTRUCTIONS...4 3. PRODUCT DESCRIPTION...5 4. CONTROL PANEL... 6 5. PROGRAMMES...7 6. SETTINGS...8

More information

3gb53231b.fm5 Page 12 Friday, April 11, :21 PM

3gb53231b.fm5 Page 12 Friday, April 11, :21 PM 3gb53231b.fm5 Page 12 Friday, April 11, 2003 12:21 PM INSTRUCTIONS FOR USE BEFORE USING THE COOKTOP SUGGESTIONS FOR ENVIRONMENT PROTECTION PRECAUTIONS AND GENERAL ADVICE ENERGY SAVING TIPS CARE AND MAINTENANCE

More information

FSS62800P. User Manual Dishwasher USER MANUAL

FSS62800P. User Manual Dishwasher USER MANUAL FSS62800P EN User Manual Dishwasher USER MANUAL 2 www.aeg.com CONTENTS 1. SAFETY INFORMATION... 2 2. SAFETY INSTRUCTIONS...4 3. PRODUCT DESCRIPTION...6 4. CONTROL PANEL... 7 5. PROGRAMMES...7 6. SETTINGS...9

More information

User and maintenance manual

User and maintenance manual GB User and maintenance manual IMPORTANT SAFETY INSTRUCTIONS These instructions shall also be available on website: docs.whirlpool.eu. YOUR SAFETY AND THAT OF OTHERS IS HIGHLY IMPORTANT. This manual and

More information

User Manual Dishwasher FAVORIT 66603VI0P

User Manual Dishwasher FAVORIT 66603VI0P EN User Manual Dishwasher FAVORIT 66603VI0P 2 www.aeg.com CONTENTS 1. SAFETY INFORMATION...3 2. SAFETY INSTRUCTIONS... 4 3. PRODUCT DESCRIPTION... 5 4. CONTROL PANEL...6 5. PROGRAMMES... 7 6. SETTINGS...

More information

INSTRUCTIONS FOR USE. To make the most of your new oven, read the user's instructions carefully and keep them on hand for consultation in the future.

INSTRUCTIONS FOR USE. To make the most of your new oven, read the user's instructions carefully and keep them on hand for consultation in the future. INSTRUCTIONS FOR USE INSTALLATION...4 SAFEGUARDING THE ENVIRONMENT... 7 IMPORTANT NOTES... 7 BEFORE USING THE OVEN... 8 OVEN ACCESSORIES... 9 CARE AND MAINTENANCE... 10 TROUBLESHOOTING GUIDE... 12 AFTER

More information

IMPORTANT SAFETY INSTRUCTIONS DANGER: WARNING:

IMPORTANT SAFETY INSTRUCTIONS DANGER: WARNING: IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the attention

More information

FAVORIT 66609M0P FAVORIT 66609W0P. EN User Manual

FAVORIT 66609M0P FAVORIT 66609W0P. EN User Manual FAVORIT 66609M0P FAVORIT 66609W0P EN User Manual 2 www.aeg.com CONTENTS 1. SAFETY INFORMATION...3 2. SAFETY INSTRUCTIONS... 4 3. PRODUCT DESCRIPTION... 5 4. CONTROL PANEL...6 5. PROGRAMMES... 7 6. SETTINGS...

More information

GETTING STARTED? EASY.

GETTING STARTED? EASY. User Manual GETTING STARTED? EASY. ZDT24001FA EN User Manual Dishwasher SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is

More information

WF140 Freestanding Dishwasher

WF140 Freestanding Dishwasher WF140 Freestanding Dishwasher Installation, Use and Maintenance Customer Care Department The Group Ltd. Harby Road Langar Nottinghamshire NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu

More information

AUTOMATIC MODULAR SCALE ICE MAKER

AUTOMATIC MODULAR SCALE ICE MAKER AUTOMATIC MODULAR SCALE ICE MAKER INSTRUCTIONS AND WARNINGS 24850 ed. 06-2012 It is strictly forbidden to reproduce this manual or any part thereof. Dear Customer, Congratulations on having chosen

More information

CTA15-2 warming drawer. operating and installation instructions

CTA15-2 warming drawer. operating and installation instructions CTA15-2 warming drawer operating and installation instructions Table of Contents GB-IE 1 PRECAUTIONS FOR USE...4 2 DISPOSAL INSTRUCTIONS - OUR ENVIRONMENT POLICY...5 3 SAFETY PRECAUTIONS...6 4 GET TO KNOW

More information

FSK53600Z. User Manual Dishwasher USER MANUAL

FSK53600Z. User Manual Dishwasher USER MANUAL FSK53600Z EN User Manual Dishwasher USER MANUAL 2 www.aeg.com CONTENTS 1. SAFETY INFORMATION... 2 2. SAFETY INSTRUCTIONS...4 3. PRODUCT DESCRIPTION...6 4. CONTROL PANEL... 7 5. PROGRAMMES...7 6. SETTINGS...8

More information

Quality makes the Difference. AquaTREND uni. User s Manual Humidifi er for Therapeutic Air Flow

Quality makes the Difference. AquaTREND uni. User s Manual Humidifi er for Therapeutic Air Flow Quality makes the Difference AquaTREND uni User s Manual Humidifi er for Therapeutic Air Flow SERIAL NUMBER HOFFRICHTER GmbH delivers all its systems with a serial number in order to ensure traceability.

More information

User Manual Dishwasher F55412VI0

User Manual Dishwasher F55412VI0 EN User Manual Dishwasher F55412VI0 2 www.aeg.com CONTENTS 1. SAFETY INFORMATION...3 2. SAFETY INSTRUCTIONS... 4 3. PRODUCT DESCRIPTION... 6 4. CONTROL PANEL...7 5. PROGRAMMES... 7 6. SETTINGS... 8 7.

More information

Hot Water Dispensers HWD2, HWD3, HWD5. Table of Contents

Hot Water Dispensers HWD2, HWD3, HWD5. Table of Contents Hot Water Dispensers HWD2, HWD3, HWD5 Operator Manual Activate your warranty now at http://gmcw.com/warranty-registration Model HWD2 Safety Information...2 Rough-In Drawing...3 Specifications...4 Installation...4

More information

User Manual Dishwasher FAVORIT 88709M0P FAVORIT 88709W0P

User Manual Dishwasher FAVORIT 88709M0P FAVORIT 88709W0P EN User Manual Dishwasher FAVORIT 88709M0P FAVORIT 88709W0P 2 www.aeg.com CONTENTS 1. SAFETY INFORMATION...3 2. SAFETY INSTRUCTIONS... 4 3. PRODUCT DESCRIPTION... 5 4. CONTROL PANEL...6 5. PROGRAMMES...

More information

User Manual Dishwasher FAVORIT 55320VI0

User Manual Dishwasher FAVORIT 55320VI0 EN User Manual Dishwasher FAVORIT 55320VI0 2 www.aeg.com CONTENTS 1. SAFETY INFORMATION...3 2. SAFETY INSTRUCTIONS... 4 3. PRODUCT DESCRIPTION... 6 4. CONTROL PANEL...6 5. PROGRAMMES... 7 6. SETTINGS...

More information

FAVORIT DISHWASHER USER MANUAL

FAVORIT DISHWASHER USER MANUAL FAVORIT 77000 DISHWASHER USER MANUAL 2 CONTENTS 4 SAFETY INFORMATION 6 PRODUCT DESCRIPTION 7 CONTROL PANEL 8 PROGRAMMES 10 OPTIONS 11 BEFORE FIRST USE 14 DAILY USE 17 CARE AND CLEANING 18 TROUBLESHOOTING

More information