OILS, CHEMICALS, CLEANERS, PAINT & MISC. LUBRICANTS
|
|
- Dortha White
- 5 years ago
- Views:
Transcription
1 LOCTITE CHEMICALS THREAD SEALANT 554 P2074 Loctite 554 refrigerant sealant provides maximum solvent resistance on threaded fittings and pipe up to 2 in diameter. It is recommended for refrigeration systems and service with strong chemicals. Not for slip fitted tube joints. 554 has excellent solvent resistance and withstands temperatures to 300 F (149 C). High Strength may require heat for disassembly. Sealing metal-to-metal tapered thread joints. Sealing of refrigerants. Sealing of strong chemicals Refrigerant Sealant 10 ml Bottle Refrigerant Sealant 250 ml Bottle THREAD SEALANT 567 PST P Pipe Sealant with Teflon 50 ml Tube Loctite thread sealant 567 PST is a high performance sealant that locks and seals metal, tapered pipe treads and fittings. The product is a creamy, paste-like anaerobic compound that cures when confined in the absence of air and between close fitting metal surfaces. The high lubricating properties of this compound prevents galling on stainless steel, aluminum and all other metal pipe threads and fittings. Medium Strength disassembles with hand tools. Sealing metal tapered pipe threads and fittings up to 5 cm (2 inches) National Pipe Thread (NPT). Industrial applications including sealing air, water, coolants, lubricants, hydraulic fluids. FAST ORANGE Loctite Fast Orange is the #1 selling biodegradable, waterless, petroleum solvent-free hand cleaner. It contains no harsh chemicals, mineral oils or ammonia that can sting cuts and abrasions. Pure, fresh-smelling natural citrus power does the cleaning. Fortified with aloe, lanolin, and other premium skin conditioners. Cleans hands of resins, oil, grease, tar, grime, soil, printers ink, epoxies, paint, rubber, gaskets and tile cement. P Fast Orange 15 oz. Bottle Fast Orange 7.5 oz. Bottle 989
2 LOCTITE CHEMICALS C5-A COPPER BASED ANTI-SEIZE C5-A is a copper based anti-seize which provides a shield against high temperature seizing and galling. Studs, bolts, flanges, gaskets all mated parts remove easily and in better condition, in typical dry service temperatures from -29 to +982 C (-20 to F). C5-A can be used on copper, brass, cast iron, steel, all alloys including stainless steel, all plastics and all non-metallic gasketing materials. RETAINING COMPOUND 609 P C5A Anti-Seize Compound 8 oz. Brush Top Can Original Equipment and Maintenance Bolts, bushings, pipes, fittings, flanges, gaskets, headers, manifolds, nuts, etc. Petro Chemicals High temperature compressor heads, threaded connections, pump housings, flanges, studs, stainless steel assemblies, cat cracker, heat exchangers, compressor heads, autoclaves. Studs, steam lines, and valves. Loctite Retaining Compound 609 is a general purpose, low viscosity, single component anaerobic retaining adhesive for cylindrical joints. The product cures when confined in the absence of air between close fitting metal surfaces. Used to bond cylindrical fitting parts. Locks bearings in place, preventing spin out. Locks bushings and sleeves in housing or shafts. Augments press fits. P Retaining Compound ml Bottle Retaining Compound ml Bottle PRIMER N Loctite Primer N decreases the set up time of Loctite threadlockers, pipe sealants and retaining compounds. Allows cold weather application. Contains no ozone-depleting compounds. Provides cure on inactive surfaces such as stainless steel. Cleans bonding surfaces. APPLICATION Use with Loctite threadlockers 242, 243, and 262, thread sealants 554, 567 and retaining compound 609. P Primer N 4.5 Aerosol 990
3 LOCTITE CHEMICALS 242 THREADLOCKER P2080 Loctite 242 is a single component anaerobic threadlocking material which is medium strength. The product cures when confined in the absence of air between threaded metal assemblies and is particularly suitable for less active substrates such as stainless steel and plated surfaces. Prevents loosening and leakage of threaded fasteners. Particularly suitable for applications such as pumps or motor mounting bolts, where vibration loosening can occur and where disassembly with hand tools is required for servicing Threadlocker 10 ml Bottle Threadlocker 50 ml Bottle 243 THREADLOCKER P2081 Loctite 243 is a single component anaerobic threadlocking material, which is medium strength. The product cures when confined in the absence of air between close fitting metal surfaces and is particularly suitable for less active substrates such as stainless steel and plated surfaces. Loctite 243 prevents loosening and leakage of threaded fasteners and is oil tolerant. Available worldwide. Prevents loosening and leakage of threaded fasteners. Particularly suitable for applications such as pump or motor mounting bolts, where vibration loosening can occur and where disassembly with hand tools is required for servicing Removable Threadlocker ml Bottle Removable Threadlocker ml Bottle 991
4 LOCTITE CHEMICALS 262 THREADLOCKER Loctite 262 is a permanent high strength anaerobic threadlocking material, which cures between engaged threads to form a unitized assembly that resists virtually all leakage, shock and vibration. The product is a single component, anaerobic liquid which cures when confined in the absence of air between threaded metal assemblies. Ideal for all 3/8 inch to 1 inch diameter nut and bolt assemblies where future disassembly is improbable. Excellent chemical resistance with a temperature resistance range of -175 C to 150 C (-65 F to 300 F). May require heat for disassembly. P2082 Fasteners that must withstand heavy shock, vibration, or extreme environmental or chemical conditions. Tamper proof Threadlocker ml Bottle Threadlocker ml Bottle 518 GASKET ELIMINATOR Gasket Eliminator 518 is a flange sealant used as an alternative to a cut gasket or as a gasket dressing. 518 improves flange sealing reliability over conventional cut gaskets. Seals to 300 F and fills gaps to Forms a flexible, solvent resistant seal that will not tear or decay. Pump coupling. P Gasket Eliminator ml Tube Gasket Eliminator ml Fuel and water pumps. Air compressor end caps. Gearbox covers. Heat exchanger end caps. Split casings. 992
5 RED DEVIL SEALANTS & CAULK RTV SILICONE SEALANT * Adheres to aluminum, plastic, metal, glass, ceramic tile, & most non-porous surfaces. * Interior/exterior use. * Withstands 600 F intermittent, 400 F constant. * Skins over in 5 minutes, dries to the touch in 30 minutes, cures in 24 hours. COLOR Fl. Oz. Squeeze Tube White Fl. Oz. Squeeze Tube Clear 0816/OI 10.3 Fl. Oz. Cartridge White 0826/OI 10.3 Fl. Oz. Cartridge Clear 0816/5I 10.3 Fl. Oz. Cartridge Gray HEAT RESISTANT RTV SILICONE SEALANT * Formulated with iron oxide to withstand extreme heat exposure. * Resists vibration. * Withstands up to +/- 25% joint movement. * Withstands 600 F intermittent, 500 F constant. COLOR 0809/OI 10.3 Fl. Oz. Red CELULLON ADHESIVE SEALANT * Superior to silicone in most peel & sheer tests. * Paintable. * Cleans up with water. COLOR 0926/OI 10.3 Fl. Oz. White 0846/5I 10.3 Fl. Oz. Gray 0927/OI 10.3 Fl. Oz. Ultra Clear CLEAR CAULK * Bonds stronger than silicone on wider variety of substrates including wood, concrete, metal, & glass. * Interior/exterior use. * Paintable. P/N SIZE Fl. Oz. (Cartridge) Fl. Oz. (Hang Tube) ALL PRODUCTS COME IN STANDARD PACKS OF 12 FOAM SEALANT - POLYURETHANE FOAM * Interior/exterior use. * Aerosol dispenser. * Tack free in 25 minutes (25 98 F). P/N SIZE Oz Oz. BLACK TOP ROOF REPAIR * Butyl rubber/asphalt formula outlasts conventional compounds. * Solvent clean-up. * Tack free in 4 hours. P/N SIZE Fl. Oz. SMOKEBLOCK SB100RD (NON-COMBUSTIBLE) SEALANT This latex based sealant blocks fire, smoke and drafts in wood frame walls and floors. It can be used in openings around vents, pipes, chimneys, fireplaces, and general building seams. It conforms to the Model Energy Code by minimizing airflow within the wall cavity without contributing to the fuel load of the wall itself. Meets Federal Spec ASTM E-136, Interior use only. * Approved for vents, pipes, chimneys and wiring. * Withstands temperatures up to 1000 F. * Use in one or two family swellings that do not exceed 3 stories. * Water clean-up. HVAC/R SEALANT This superior quality sealant is made especially for HVAC/R applications. It provides long-lasting, weather-resistant seals and offers excellent adhesion, flexibility and durability. It adheres to metal and most other building materials and remains flexible from [60 F to 500 F. Won t crack, shrink or peel! Use on: Air Conditioners, Furnaces, Water Heaters. Vents, Ducts. Refrigerators, Freezers, Pipes P/N COLOR SIZE 0896 White 10.1 Fl. Oz 0897 Clear 10.1 Fl. Oz 0896/50 Aluminum 10.1 Fl. Oz FOAM AND FILL POLYURETHANE FOAM SEALANT This sealant expands to fill holes, cracks, gaps and voids around windows, doors, pipes, outlets, vents and foundations. This insulating foam forms an airtight, waterproof bond and seals out drafts, moisture and pests. Once cured, the foam can be sanded, painted or stained. Contains no HCFCs or CFCs so it is safe for the environment. It can be used inside or outside. Use on: Window and Door Frames, Electrical Outlets, Foundations, Vents, Pipes P/N DESCRIPTION SIZE 0913 Minimal Expanding 12 Oz Minimal Expanding 20 Oz. P4326 ALSO SEE RED DEVIL TOOLS FOUND UNDER THE TOOL SECTION (PAGES 784, 785 & 786) 993
6 RED DEVIL FIRESTOP PRODUCTS SSS100 (EXPANDING) SEALANT This latex-based intumescent firestop compound effectively seals penetration openings against the spread of fire, smoke, toxic gases and water when installed properly. If exposed to high temperatures or fire, this patented material expands aggressively to quickly close off voids left by burning or melting of combustible materials. FEATURES: Expands over 5 times original size Water base for easy installation, clean up and disposal Endothermic fillers absorb heat and release water Sandable and Paintable Approved for plastic pipes and cables, metal pipes and multiple pipes Case Qty Case Wt Case Cube P2095 LC-150 LATEX (NON-EXPANDING) SEALANT This latex-based high solids fire stop compound effectively seals penetration openings against the spread of fire, smoke, toxic gases and water when installed properly. It adheres to virtually all construction surfaces and may be applied using a standard caulking gun FEATURES: Water based for easy installation, clean up and disposal Endothermic fillers absorb heat and release water Sandable and paintable Approved for metal pipes, electrical/ telephone cables and HVAC ducts Case Qty Case Wt. Case Cube P
7 SSB100 FIRESTOP PUTTY This non-hardening, intumescent compound is designed to seal through-penetrations as well as certain membrane penetrations against the spread of fire, smoke and toxic gases. It expands up to 8 times its original size when exposed to high temperatures or flames. FEATURES: Non-hardening for easy retrofit Two stage intumescence features aggressive expansion of material Highly adhesive formula-stays put but allows movement Sound deadening-reduces noise transmission Approved for retrofit applications, metal pipes, loose cables, insulated pipes Case Qty Case Wt. Case Cube Product Number Description Case Quantity SPEED DEMON II SILICONE SEALANT - ACETOXY 0706 White, Cartridge Fl. Oz Clear, Cartridge Fl. Oz. 12 P
8 HARDCAST SEALANTS SEALANTS P918 VERSA GRIP A water based sealant using built-in reinforcement which adds strength without using VG oz. scrim. For low, medium, or high pressure indoor/outdoor HVAC systems. Surfaces and VG conforms to surface variations HVAC Duct Systems. VG gal. VG VG VG gal. VG SURE GRIP A non-sag, high solids, rubber based sealant designed for indoor/outdoor use. It cures SG oz. quickly to form a strong, durable, hard, flexible bond to low, medium, and high pressure SG galvanized metal or aluminum duct systems. SG FLEX GRIP A water-based synthetic rubber sealant not only good for HVAC duct systems, but a useful FG sealant for wood, metal, and masonry application. Indoor application only. FG oz. IRON GRIP With its water base, this vinyl acrylic sealant for low, medium, and high pressure HVAC IG duct systems will cure to a tough flexible film excellent for galvanized metal. IG IG oz. COLD SEAL This cold applied sealant is a permanently tacky, fire retardant seal for HVAC seams. Will CS not string! CS gal. DUCT SEAL An all purpose sealant includes UV inhibitors for extended outdoor exposure and fiber DS reinforcement Non toxic & Non sag formulation. DS gal. DS DS oz. FIRE STOP PRODUCTS FIRE GRIP Stops fumes, fire and smoke from passing through floors, walls, joints and other potentially FG-3000 Caulk Gun hazardous penetrations. 996
9 HARDCAST SEALANTS P919 TAPES AND ADHESIVES GYPSUM TAPE A woven fiber tape impregnated with a mineral gypsum compound. Used w/fta-20 or DT in x 300 ft. RTA-50, it forms an airtight seal for low, med., or high pressure HVAC Duct Systems. DT in. x 300 ft. DT in. x 300 ft. ADHESIVE This adhesive is non-flammable (wet or dry) and is to be used with our DT gypsum tape to FTA-20 seal indoor low, medium, or high pressure duct systems. ADHESIVE A modified styrene acrylic adhesive that is used with our DT gypsum tape to seal indoor or RTA-50 outdoor low, medium, or high pressure duct systems. APPLICATOR Used to coat DT tape with adhesive. It is made of a high impact polyethylene plastic and will save up to 50% on the amount of adhesive used. The adhesive reservoir has a re-sealable lid, so no clean-up is needed. DT-14 1 ea. ELASTOMERIC SEALING TAPES P921 ALUMA-GRIP A heavy duty, pressure sensitive, all weather tape with an aluminum foil backing and butyl AG in. x 50 ft. rubber adhesive. It provides instant water tight bonding that seals most surfaces and AG in. x 50 ft. conforms to surface variations. AG in. x 50 ft. AG in. x 50 ft. AG in. x 50 ft. FOIL-GRIP An aluminum foil backed, pressure sensitive sealant in tape form for an instant AFG in. x 100 ft. indoor/outdoor, air-water tight bond on low and medium pressure duct. AFG in. x 100 ft. AFG in. x 100 ft. AFG in. x 100 ft. AFG-1402P-2 2 in. x 100 ft. AFG-1402P-3 3 in. x 100 ft. ALL PURPOSE An all purpose sealant tape that has a pressure sensitive butyl rubber for excellent AP in. x 50 ft. adhesion to most surfaces. AP in. x 50 ft. AP in. x 50 ft. AP in. x 50 ft. FLANGE GASKET Specially formulated to seal HVAC duct systems where flange type connectors are used. It is also excellent in the sealing of lap joints on metal buildings. GT /8 x 3/16 x 25 ft. 997
10 HARDCAST SEALANTS P920 INSULATION ADHESIVES GLAS-GRIP 901 This insulation adhesive is a safe, high strength vinyl acrylic water based adhesive that is IA NON-SOLVENT! Clean up with soap and water. IA IA gal. GLAS-GRIP 991 An instant tracking, low odor, rapid drying WATER BASED adhesive with a tack time that GG rivals solvent based adhesives. Non-flammable, U.L. classified. GG GG GLAS-GRIP 636 (RED) A self extinguishing (in the dry state), fast tacking, non-cobwebbing, spray adhesive GG-636SE-4 designed to attach fibrous glass insulation to galvanized sheet metal duct systems. Spray, GG-636SE-5 brush, or roll. GG-636SE gal. GLAS-GRIP 637 (BLACK) A self extinguishing (in the dry state), fast tacking, non-cobwebbing, spray adhesive GG-637SE-4 designed to attach fibrous glass insulation to galvanized sheet metal duct systems. Spray, GG-637SE-5 brush, or roll. GG-637SE gal. GLAS-GRIP 658 A pressure sensitive insulation adhesive w/ immediate tack. Self contained spray system GG lb. with low pressure web spray which eliminates adhesive vaporization and spray GG lb. bounce-back. GG lb. GG lb. GG oz. GG-SG Spray Gun GG-H6 6 Hose GG-H12 12 Hose GG-H18 18 Hose P922 LAGGING MASTIC LAG-GRIP A high strength, crack resistant water based lagging adhesive, also used to seal butt joints LG in duct liner, or to coat foam insulation. Easy application and weather resistant. LG SPECIALTY ITEMS P923 FIBERGLASS SCRIM Scrim used to reinforce duct sealant over holes in ductwork. Duct sealants alone may not FS in. x 150 ft. seal holes in duct work but could require the addition of Scrim to strengthen and prevent FS-151AB 3 in. x 150 ft. duct leakage. BRUSHES F in. wide 998
11 CHEMICALS HIGHSIDE CHEMICALS LEAK LOCK A soft pipe joint compound for sealing threaded joints, flanged joints, gasket surfaces and mating surfaces. It is resin based brushable paste which remains permanently flexible, adheres to internal surfaces and fills voids. For use on metal and plastic materials subject to extreme vibrations, temperatures from -100 F (-73 C) to 400 F (204 C), full vacuums to 10,000 PSI /3 Oz Oz Pt Gal. Leaklock GAS LEAK DETECTOR MEDIUM TEMPERATURE Traditionally non-toxic and non-hazardous. It is a viscous, fluorescent, bubble-type gas leak detector rated to 27 F (-3 C). Leaks appear as large strong bubbles which cling to the applied surface and are fluorescent under black light. For use on hot and cold piping and equipment containing most gases such as air, natural gas, all refrigerants, ammonia, SO2, etc Oz Oz Gal. Gasleakf RED EPOXY A high performance, heat cured two part epoxy kit for patching or sealing on all metals including aluminum and some plastics. It is excellent for sealing threaded or unthreaded pipes, and as field repair kits for aluminum evaporators, coils, radiators, pipes, tanks, etc. Temperature range: -100 F (-73 C) to 300 F (149 C) Oz. Tubes Redepoxy TRAX Clear, non-toxic, non-residue, bubble-type liquid leak detector formulated to produce long lasting bubbles under job-site conditions. Is oxygen compatible and meets the performance requirements of military specifications: Mil Type1 A, B & C. Temperature range 27 F (-3 C) to 200 F (93 C) /3 Oz Oz Gal Gal. Traxfh55 GAS LEAK DETECTOR LOW TEMPERATURE A non-toxic and non-hazardous and does not contain glycol. It is a non-freezing, viscous fluorescent, bubble-type gas leak detector rated to -30 F (-34 C). For use on hot and cold piping and equipment containing most gases such as air, natural gas, all refrigerants (R-12, R-134a, R-22, R-502, etc.) ammonia, SO2, etc Oz Oz Gal. Gasleakf SOLDERENE High quality, paste type non-acid soldering flux with industrial strength wetting agents to promote solder flow. For use with low and mid temperature soft solders, both lead and lead-free, on all metals except aluminum and magnesium Oz Pt. Solderle ACID NEUTRALIZER Designed to chemically neutralize and prevent acids that are formed in air conditioning and refrigeration systems due to refrigerant and refrigeration oil break down, moisture and compressor burnout Oz. 999
Nu-Brite Same popular Nu-Brite Powerful high foaming action lifts out dirt and grime while brightening coils Excellent & powerful cleaner that is espe
Aerosols Nu-Brite Same popular Nu-Brite Powerful high foaming action lifts out dirt and grime while brightening coils Excellent & powerful cleaner that is especially adapted for kitchen degreasing Outdoor
More informationMainline Primers & Cements
2017 PAGE 575-1 Mainline Primers & Cements 570-1048 PT Clear PVC/ CPVC Primer Low-VOC ML11234 570-1050 1/4PT Clear PVC/ CPVC/ ABS/ Styrene Cleaner ML11237 for PVC/ CPVC/ ABS & Styrene 570-1060 1/4PT Purple
More informationChemicals. Cement (For PVC, ABS & CPVC) G20. For Water Treatment Chemicals See Water Treatment And Purification Chemicals Section 27/05/16
Cement (For PVC, ABS & CPVC) G20 All purpose cement for PVC, ABS, CPVC pipe and fittings up to 6" in diameter 2 hour cure time at 16C (60F) before pressure testing (up to 180 psi). Longer cure times may
More informationFAN ENGINEERING. Sealing of Fan Housings
FAN ENGINEERING Information and Recommendations for the Engineer FE-700 Sealing of Fan Housings Introduction A variety of options are offered by fan manufacturers to seal fan housings. Sealing the housing
More informationTwo (2) Side Rail Cable Tray
O-1 B-Line series Cable Tray Systems 3M Fire Barrier Self-Locking Pillows Extremely easy to install - saves time and labor Easy removal and fully reusable - with no blocking or fusing of materials No cutting
More informationThe Yellow Can Removes oils & fatty acids
NEW Pricing Effective 2-7-2018 Page 163 NON-CHLORINATED MOLD CLEANER A Powerful Cleaner & Degreaser with No Ozone-Depleting Substances NEW Non Chlorinated PACKAGED IN: Convenient Aerosol Can - OR - Refillable
More informationB-LINE SERIES. Product brochure. Firestop
Product brochure B-LINE SERIES 3M Fire barrier self-locking pillows Extremely easy to install saves time and labor Easy removal and fully reusable with no blocking or fusing of materials No cutting required,
More informationGlue Richard Hicks 8/27/2018. Back to Basics. Glue. It Holds Things Together
Back to Basics Glue It Holds Things Together Different Types of Glue I ve Used and liked: White Craft Glue Elmer s Yellow Wood Glue Titebond Polyurethane Gorilla Glue Super Glue (Cyanoacrylate) Starbond
More informationSECTION DUCTWORK. A. Section Painting: Weld priming, weather resistant, paint or coating.
SECTION 15890 DUCTWORK PART 1 - GENERAL 1.1 SECTION INCLUDES A. Metal ductwork. B. Duct cleaning. 1.2 RELATED SECTIONS A. Section 09900 - Painting: Weld priming, weather resistant, paint or coating. B.
More informationDUCTING & VACUUM HOSE
DUCTING & VACUUM HOSE 11 VACUUM HOSE An extremely flexible and lightweight hose for vacuuming wet or dry materials in shops and car washes. The hose is crush-proof because it returns to its original shape
More informationVAPCO CHEMICALS
INDEX ADHESIVES AND SEALANTS GREAT WHITE... 11-4 MAGNA TACK... 11-4 MEAN GREEN ADHESIVES... 11-3 MEAN GREEN BULK... 11-3 MODEL 25F... 11-2 STICK-IT... 11-2 VAPCO BRUSHES... 11-2 AEROSOLS ELECTRICAL CONTACT
More informationMfg.# Description Code # SOLDERS AND FLUXES THREAD SEALANTS, GASKETS & PACKING
June 1, 2006 February 1, 2004 PAGE 550-1 SOLDERS AND FLUXES Hercules Products Swif 95. Lead Free 95/5 Tin-Antimony solder and flux, in paste form. For sweat soldering and tinning where additional strength
More informationCLEANING DETERGENT SOLUTIONS IN CONSTRUCTION
CLEANING DETERGENT SOLUTIONS IN CONSTRUCTION PROFESSIONAL CONSTRUCTION CLEANING AGENTS As the world s leading manufacturer of cleaning solutions, our new detergent line was designed specifically to meet
More informationOetiker Stepless TM Ear Clamps
WaterRise Water Shut-Off u Premade to save you time and money u Self-contained in tough PVC case u Insulation and heating cable protect against the cold u All copper pipe and rugged Mueller valves u 5-year
More informationSECTION DUCTWORK
PART 1 GENERAL 1.1 REFERENCES SECTION 23 31 00 DUCTWORK A. ASHRAE - Handbook, Duct Design B. ASHRAE - Handbook, Duct Construction C. ASTM A90/A90M - Standard Test Method for Weight (Mass) of Coating on
More informationSOLDERING EQUIPMENT AND ACCESSORIES CHEMICAL PRODUCTS
SOLDERING EQUIPMENT AND ACCESSORIES CHEMICAL PRODUCTS High performance protection for electrics and metals. WET.PROTECT e-basic protects everywhere, where electrics and electronics come into contact with
More informationREFRIGERANT PIPING SYSTEM
PART 1 GENERAL 1.01 DESCRIPTION A. The requirements of this section apply to the refrigerant piping system connecting refrigeration and HVAC equipment specified in other sections of these specifications.
More informationMAINTENANCE SEAL MAINTENANCE PREVENTING WINDOW CONDENSATION. Kohltech.ca
MAINTENANCE Keep your new windows and entrance system looking great and working great for many years. All windows and doors must be maintained properly to ensure trouble free use. All moving parts should
More informationInstallation Instructions T 9822 Gas Dryer. en - US, CA. To prevent accidents
Installation Instructions T 9822 Gas Dryer To prevent accidents en - US, CA and appliance damage read these instructions before installation or use. M.-Nr. 07 431 110 2 WARNING For your safety the information
More informationMARATHON HEATER. File # E Made in USA
MARATHON HEATER S I L I C O N E R U B B E R H E A T E R S File # E202904 Made in USA Wire wound Silicone Rubber Heaters Marathon Heater flexible heaters provide outstanding performance in applications
More informationHVAC BASIC MATERIAL AND METHODS 1.01 RELATED CORNELL DESIGN AND CONSTRUCTION STANDARDS
230500 HVAC BASIC MATERIAL AND METHODS PART 1 GENERAL 1.01 RELATED CORNELL DESIGN AND CONSTRUCTION STANDARDS A. Section 230000 Basic HVAC Requirements B. Section 230523 Valves C. Section 230510 Chilled
More informationSpecial Order Only t Surface shut-off. One tool for all ring sizes 3/8", 1/2" and 3/4" /2" x 3/4"
WaterRise In-Ground Water Shut-Off t Premade to save you time and money t Self-contained in tough PVC case t Insulation and heating cable protect against the cold t All copper pipe and rugged Mueller valves
More informationAdhesives Selection Guide
Adhesives Selection Guide Two-Part Polyamide Epoxy S1006 Raychem Two-Part Polyamide Epoxy Raychem-brand S1006 flexible high-viscosity, two-part polyamide epoxy is supplied in a bi-pack to ensure correct
More informationA. Air Handling Units shall be designed to the specific requirements of the application: Recirculation or 100% Makeup.
SECTION 23 70 00- CENTRAL HVAC EQUIPMENT PART 1: GENERAL 1.1 PURPOSE: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design.
More informationDo not use this vent pipe or fittings for venting incinerators of any kind.
! CAUTION! Do not use this vent pipe or fittings for venting incinerators of any kind. C.S.A. Certified For Natural Gas Or Propane Tested For 100 LBS. ASME Working Pressure For correct installation of
More informationFIREPRO FIRESTOPPING AND PENETRATION SEALS PRODUCT GUIDE
Superior 4 in 1 insulation (59) Y November 2008 (K22) FIREPRO FIRESTOPPING AND PENETRATION SEALS PRODUCT GUIDE Superior 4 in 1 insulation STRAIGHT FROM THE SOURCE S MOUTH... Introducing the most reliable
More informationSECTION STEAM CONDENSATE PUMPS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 23 22 23 STEAM CONDENSATE PUMPS SPEC WRITER NOTES: 1. Delete between // ---- // if not applicable to project. Also delete any other item or paragraph not applicable
More informationPatterson/AMT Inline Circulator Pump Refer to pump manual for General Operating and Safety Instructions.
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationRhinoskin Spray On Insulation Ceramic Insulation Coating
Application Temperature: Adhesion and drying of the acrylic latex coating requires a minimum surface and ambient temperature of 50 Fahrenheit (10 Centigrade). To fully cure and harden a minimum ambient
More informationNU-CALGON CHEMICAL PRODUCTS
INDEX COIL CLEANERS CALCLEAN... 11-3 NU-BRITE... 11-3 EVAP FOAM NO RINSE... 11-4 EVAP POW'R-C... 11-4 NU-BLAST CONDENSER... 11-4 SELECTION GUIDE... 11-2 11-3 SPECIAL HD CALCLEAN... 11-4 GAS LEAK DETECTORS
More informationPatterson/AMT Inline Circulator Pump Refer to pump manual for General Operating and Safety Instructions.
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationDOCUMENT TABLE OF CONTENTS
DOCUMENT 00003 June 16, 2005 TABLE OF CONTENTS DOCUMENT NO. INTRODUCTORY INFORMATION DOCUMENT 00003 TABLE OF CONTENTS DIVISION 1 GENERAL REQUIREMENTS SECTION 01011 SECTION 01025 SSP21.1-1 SECTION 01026
More informationAerosol Products. 3Innovation
Aerosol Products 3Innovation You re in a demanding industry. To be successful, you need a wide range of reliable products designed to effectively manage your daily processes. You need a supplier with a
More informationInstallation instructions for the T 9820 Gas Dryer
Installation instructions for the T 9820 Gas Dryer The T 9820 gas dryer is only approved for use in the USA and Canada. It is not approved for use in Mexico. To prevent accidents en - US, CA and machine
More informationIntroduction. Product Selector. Magnet Bonding Guide. Henkel Your partner worldwide.
Henkel has developed three new magnet bonding adhesives,, 3060, Faster Fixture Times Easier Processing Higher Resistance Extended Shelf Life Higher Impact Strength Higher Shear Strength Improved Moisture
More informationATCO How a Cooling Unit Works
G A L V A N I Z E D Contents of this PDF How a Cooling Unit Works pages 1 2 pages 3 6 How a Cooling Unit Works RV refrigeration manufacturers have known the value of zinc protection for decades. In fact,
More informationSOUTHWEST FIREBIRD MFG SONORAN UNVENTED Model 36/42/48
SOUTHWEST FIREBIRD MFG SONORAN UNVENTED Model 36/42/48 INSTALLATION INSTRUCTIONS PREFABRICATED MODULAR MASONRY- UNVENTED SONORAN 36/42/48TO BE USED WITH UNVENTED GAS LOGS. SAVE THIS BOOK This book is valuable.
More information568X, 587X, 588X Series
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationSOLUTIONS TO KEEP IT COOL
SOLUTIONS TO KEEP IT COOL Cool Air Products has the safest, most innovative, smartest solutions in the market. Cool Air Products was founded with the concept of manufacturing revolutionary products that
More informationULTRA DYNAMIC HOSE PRODUCTS HOSE & TUBING CATALOG 2018 A DIVISION OF UBBER MPANY, INC. RUBBER COMPANY, INC RUBBER COMPANY, INC.
ULTRA DYNAMIC HOSE PRODUCTS HOSE & TUBING CATALOG 2018 A DIVISION OF RUBBER COMPANY, INC. UBBER MPANY, INC. RUBBER COMPANY, INC Hose assemblies fabricated to customer requirements - our specialty. Let
More informationVACUUM VALVES AND HOSES
VACUUM VALVES AND HOSES 5046 Vacuum Valve Two-piece 500 F (260 C) industry standard 5255 Vacuum Valve Three-piece 500 F (260 C) industry standard SS5700 Stainless Steel Vacuum Valve Three-piece 1000 F
More informationIndex. + Kleen Kote 200 Concentrate. + Kleen Krete. + Real Pump Power Spraying System. + Real Pump EXPRESS Portable Power Spraying System
Maritime Catalog Index + Kleen Kote 200 Concentrate + Kleen Krete + Real Pump Power Spraying System + Real Pump EXPRESS Portable Power Spraying System + Power Sprayer Extras + Extensions & Wands + Poly
More informationHEATING AND VENTILATION
SECTION 14-102.04 14-102.04/ 1 2007OC19 DESCRIPTION The heating, ventilation and air conditioning (HVAC) system is designed to optimize passenger comfort. The system regulates interior vehicle atmosphere,
More informationc. Oko-Tex (European environmental health standard)
SECTION 09720 Wall Covering Texturglas WALL FINISH SYSTEM GENERAL 1.1 SUMMARY A. Section Includes: Texturglas Wall Finish System. B. Related Sections: Section(s) related to this section include: 1. Gypsum
More informationA. Section includes split-system air-conditioning units consisting of separate evaporator-fan and compressor-condenser components.
Page 238126-1 SECTION 238126 - This Section includes requirements for the LEED Rating System. However, equipment specified in this Section may not qualify for LEED Rating System prerequisites and credits.
More information1SC-SSC Splice Connection Kit Installation Instructions
1SC-SSC Splice Connection Kit Installation Instructions Description The 1SC-SSC is a NEMA 4 rated splice connection kit for use with Raychem 1SC30, 40, 50, 60, 70, 80 (-CT) and 1SC/H30, 40, 50, 60, 70,
More informationSummary of BBS Proposed Ohio Mechanical Code Rule Changes October 2016
Summary of BBS Proposed Ohio Mechanical Code Rule Changes October 2016 Ohio Administrative Code Rule Number OMC Section IMC origin Reason for proposed 4101:2-2-01 Air, Makeup 2015 Modified definition Air,
More informationCartridge Heaters. Metric FIREROD Cartridge. Applications and Technical Data
W A T L O W The Watlow FIREROD not only set the industry standard for cartridge heaters, it continues making improvements in construction and design. Among those improvements is the metric FIREROD, a variation
More informationBrown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION AIR HANDLING UNITS
SECTION 23 70 00 AIR HANDLING UNITS PART 1. GENERAL 1.1 Section includes air-handling units to 15,000 cfm and accessories. 1.2 Related Sections 1 : A. Division 01 - Brown University Standard for Narragansett
More information569, 570, 571, 572 Series
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationGeneral System Layout Sketch
General System Layout Sketch EZ-37 Solar Panels PV panel Glycol Fill Valve Expansion Tank ` 1 Introduction This document describes how to install a Heliatos GH type solar water heating system. These systems
More information1. Vinyl wall covering. 2. Woven glass-fiber wall covering. 3. Textile wall covering. 4. Wallpaper. 5. Heavy-duty, synthetic, textile wall covering.
SECTION 09950 - WALL COVERINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationWalk-in Refrigerated Rooms. An Overview of Requirements, Options and Construction Details
Walk-in Refrigerated Rooms An Overview of Requirements, Options and Construction Details Definition A refrigerated room is a stand alone structure designed to hold products at either a medium temperature
More informationProduct Catalog June 2012
Product Catalog Category Description Page Product Categories 1 Plastic Pipe Cements and Primers Oatey, Hercules and United Elchem solvent cements, primers, cleaners and related products 2 Thread Sealants
More informationa complete line of chemicals for use by electronics, electrical and industrial users. In addition to Part No A6G 16 oz. 1 gal. 6 gal.
AEROSOLS Formulating the Future GC Electronics has been the primary supplier of electronics to the electrical and electronic industry since 9. In 997, GC upgraded its technology base to include the new
More informationLSFG-8 LOW SOUND & SLSFG-10 SUPER LOW SOUND TOWER FEATURES
The Leaders in All-Fiberglass Cooling Towers REYMSA s success is the result of 35 years of experience in cooling towers. We have been putting ideas into action by researching and developing the latest
More informationRS Chimney Fan for Solid Fuel Applications
Installation & Operating Manual RS Chimney Fan for Solid Fuel Applications USA CAN Product Information... Chapter 1 + 2 Mechanical Installation... Chapter 3 Electrical Installation... Chapter 4 Start Up
More informationSupplying the Solution Since BRODI SPECIALTY PRODUCTS LTD.
Supplying the Solution Since 1976 BRODI SPECIALTY PRODUCTS LTD. WWW.BRODI.COM D. 3175 14TH AVENUE, UNIT 1, MARKHAM, ON L3R 0H1 M 1.877.744.0751 sales@brodi.com COIL CLEANERS COILEAN AEROSOL Non-Rinse,
More informationUNIVERSITY OF ROCHESTER DESIGN STANDARDS NOVEMBER 1, 2013
SECTION 15800 - AIR HANDLING EQUIPMENT 1.1 GENERAL A. All air handlers installed shall conform to the University of Rochester specification Guideline for Semi-Custom and Pre-Engineered Air Handling Units.
More informationSECTION (15820) - AIR DUCT ACCESSORIES
PART 1 GENERAL 1.01 SUMMARY A. Section includes: SECTION 23 33 00 (15820) - AIR DUCT ACCESSORIES 1. Manual-Volume Dampers 2. Fire Dampers 3. Turning Vanes 4. Duct-Mounted Access Doors 5. Flexible Connectors
More informationModel ESFR-17 Dry Type Pendent Sprinklers Early Suppression Fast Response 16.8 K-factor General Description
Technical Services 800-381-9312 +1-401-781-8220 www.tyco-fire.com Model ESFR-17 Dry Type Pendent Sprinklers Early Suppression Fast Response 16.8 K-factor General Description The TYCO Model ESFR-17 Dry
More informationESD Safe UL Approved INSTRUCTIONAL MANUAL EX V EX V TEMPERATURE CONTROLLED SOLDERING STATION
ESD Safe UL Approved INSTRUCTIONAL MANUAL MODEL PART NUMBER EX-685 110V 0685-0000 EX-685 220V 0685-2000 TEMPERATURE CONTROLLED SOLDERING STATION AUTOMATED PRODUCTION EQUIPMENT 3661 Horseblock Road, Medford,
More informationCARE INSTRUCTIONS BOOKLET
CARE INSTRUCTIONS BOOKLET CARING FOR YOUR FURNITURE Eco Outdoor furniture is designed and built for use and enjoyment out of doors. The furniture utilizes materials that are either naturally very tough
More informationChemical Products COMPLETE LINE
Chemical Products COMPLETE LINE Professional Quality Chemical Products New and Improved Formulations CFC/HCFC Free Chemicals Color-Coded Aerosol Caps Black Industrial Use Only White General Use Full Spectrum
More information569, 570, 571, 572 Series
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationA. Section Common Motor Requirements for HVAC Equipment: Fan motors.
SECTION 233516 - ENGINE EXHAUST SYSTEMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Exhaust fans. B. Ductwork and duct fittings. C. Inlet fittings. D. Accessories. E. Carbon monoxide detectors. 1.2 RELATED
More informationDUCT SYSTEMS CHAPTER 6
SECTION 601 GENERAL 601.1 Scope. Duct systems used for the movement of air in air-conditioning, heating, ventilating and exhaust systems shall conform to the provisions of this chapter except as otherwise
More informationExtinguishers. Commercial Industrial High rise buildings
Commercial Industrial High rise buildings Extinguishers Design, Supply, Installation, Testing, Commissioning, Maintenance, and Service of Firefighting and Fire Protection Systems Think fire protection......thank
More informationIRON METAL FRAME MAINTENANCE
Quality casual and outdoor patio furniture is an investment in comfort and style. Proper and regular care of your outdoor patio furniture and pool furniture will extend its life and enhance its beauty.
More informationSECTION GYPSUM PLASTER
SECTION 09210 PART I - GENERAL 1.01 DESCRIPTION A. Scope: Work under this Section shall include all materials and installation for support of gypsum plaster used as a finish for partitions and ceilings
More information100% Safety Shutoff Control 40,000 BTUH Input Rating Constant Pilot Propane Gas
glor sun The Original Outdoor Patio Heater Manufactured by INFRARED DYNAMICS, INC. Yorba Linda, CA 92886 U.S.A. Tel: (714) 572-4050 Fax: (714) 572-6093 Toll-Free: (888) 317-5255 www.infradyne.com SPECIFICATIONS:
More informationBARD Cabinet Finishes and Corrosion Coating Options
BARD Cabinet Finishes and Corrosion Coating Options Bard understands that corrosive environments require special cabinet finishes or component coatings to withstand harsh or corrosive outdoor conditions.
More informationDIVISION 15 MECHANICAL
DIVISION 15 MECHANICAL A. GENERAL DESIGN CONDITIONS 1. Design occupied spaces to maintain 72 F and a space dew point temperature not to exceed 55 F. 2. Design classroom and office space buildings with
More informationA powerful organic cleaner and degreaser that enhances workplace safety without compromising performance.
triple 7 Heavy Duty A powerful organic cleaner and degreaser that enhances workplace safety without compromising performance. > Removes heavy oil & grease deposits & Protects the cleaning surface > Extra
More informationRSES SERVICE APPLICATION MANUAL TABLE OF CONTENTS AUGUST 2016
This Table of Contents lists the complete contents of the RSES s (SAM) issued to date. Section 1 Refrigeration 620-05 Principles of Refrigeration Part 1 620-06 Principles of Refrigeration Part 2 620-67
More informationSPIDER P SPIDER P mineral
The leader in the selfadhesive technology! SPIDER P SPIDER P mineral SPIDER P and SPIDER P MINERAL are excellent quality self-adhesive waterproofing membranes made with ADESO technology, the new compound
More informationDesign and Construction Standards SECTION PLUMBING EQUIPMENT
SECTION 15450 PLUMBING EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES: A. Water heaters. B. Packaged water heating systems. C. Water storage tanks. D. Water softeners. E. Pumps. F. Circulators. 1.2 REFERENCES
More informationARCHITECT S SPECIFICATIONS For Commercial Vinyl Wallcoverings
1 1. GENERAL 1.1 Summary Contractor shall furnish, install and finish a vinyl wallcovering as specified in the contract documents. 1.2 Sample Contractor shall submit for the architect s approval a sample
More information1.1 This section applies to air handling units for HVAC Systems.
AIR HANDLING UNITS GENERAL INFORMATION 1.1 This section applies to air handling units for HVAC Systems. DESIGN REQUIREMENTS 2.1 Design Criteria a. The decision to use modular central station air handling
More informationCertainTeed. Finishing Products. Eastern Canada
CertainTeed Finishing Products Eastern Canada CertainTeed Finishing Products CertainTeed is a complete system of finishing products, specially developed to meet the demands of drywall professionals. The
More informationWATER MANAGEMENT. Core Item Solutions that Provide Innovation & Profit Potential OFF SHELF 90051CBL 90051DCBL
WATER MANAGEMENT Core Item Solutions that Provide Innovation & Profit Potential Quickly Connect All Your Car Wash Cleaning Devices Universal connector system allows for easy switching between nozzles,
More informationThermal Steel Care & Maintenance Guide
Thermal Steel Care & Maintenance Guide Introduction Arcadia Custom Thermal Steel products require regular and proper inspection, cleaning and maintenance before, during and after installation in order
More informationACIDS & ACID CLEANERS
Coil Cleaner-Acid ACIDS & ACID CLEANERS Acid Coil Cleaner is a blend of acids, water based solvent detergents along with wetting, penetrating, and rinsing surfactant technology designed for heavy duty
More informationDUCT SYSTEMS CHAPTER 6
CHAPTER 6 DUCT SYSTEMS SECTION 601 GENERAL 601.1 Scope. Duct systems used for the movement of air in air-conditioning, heating, ventilating and exhaust systems shall conform to the provisions of this chapter
More informationSECTION KITCHEN HOOD AND DUCT FIRE SUPPRESSION SYSTEM
PART 1 GENERAL 1.01 SUMMARY SECTION 15371 KITCHEN HOOD AND DUCT FIRE SUPPRESSION SYSTEM A. Section Includes: A complete wet chemical automatic fire suppression system for the exhaust hood, including necessary
More informationInspection Checklist Mechanical Rough in
Property Owner Name: Property Address: Permit Number: Inspectors Name: Review Date: Permits and Plans 1. Job address is posted in a visible location. (R319.1) 2. Permit and approved plans are on site and
More informationProduct Catalog June 2012
Product Catalog Category Description Page Product Categories 1 Plastic Pipe Cements and Primers Oatey, Hercules and United Elchem solvent cements, primers, cleaners and related products 2 Thread Sealants
More informationModel IVSI Positive Pressure Venting Systems
C O M M E R C I A L A N D I N D U S T R I A L V E N T I N G Model IVSI Positive Pressure Venting Systems Ideal for discharging exhaust gases and fumes from boilers, heaters, ovens, engines, turbines and
More informationSECTION PACKAGED ROOFTOP AIR CONDITIONING UNITS - CUSTOM
SECTION 23 81 06 - PACKAGED ROOFTOP AIR CONDITIONING UNITS - CUSTOM PART 1 - GENERAL 1.1 SUMMARY A. This Section includes equipment types that contain all the components of the refrigeration process within
More informationINSTALLATION INSTRUCTIONS WARRANTY
QT FLOW CENTER INSTALLATION INSTRUCTIONS Fig. 1. Low Head Pump Center Flow Chart Fig. 2. High Head Pump Center Flow Chart NOTE: Read the entire instruction manual before starting the installation. WARRANTY
More informationTECHNICAL DATA. Wet 26a. February 22, 2009
February 22, 2009 Wet 26a 1. DESCRIPTION The Viking Alarm Check Valve serves as a check valve by trapping pressurized water above the clapper and preventing reverse flow from sprinkler piping. The valve
More informationHeat Exchanger Block Replacement Instructions
Series 1-4 Gas-fired water boiler Heat Exchanger Block Replacement Instructions Ultra-80 S1-4 Heat Exchanger Block Replacement Kit, Part No. 383-500-773 Ultra-105 S1-4 Heat Exchanger Block Replacement
More informationCHAPTER 8 CHIMNEYS AND VENTS
CHAPTER 8 CHIMNEYS AND VENTS SECTION 801 GENERAL 801.1 Scope. This chapter shall govern the installation, maintenance, repair and approval of factory-built chimneys, chimney liners, vents and connectors.
More informationA. Operation and Maintenance Data: For pumps to include in emergency, operation, and maintenance manuals.
SECTION 23 21 23 - HYDRONIC PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationDARTMOUTH COLLEGE DESIGN March 15, 2003 & CONSTRUCTION GUIDELINES
SECTION 15830 HEATING & COOLING TERMINAL UNITS PART 1 DESIGN DIRECTIVES 1.1 DESIGN CRITERIA A. All fan coil units shall be sized to meet design load while operating at medium speed. In extreme noise sensitive
More informationTOCOS. Guidelines & Precautions. For Using Trimmer Potentiometers. Guidelines for Circuit Design. Guidelines for Production Processes
TOCOS Trimmer Potentiometers are designed and manufactured with emphasis on dependability and costeffectiveness. For reliable performance and general safety, follow these guidelines and precautions for
More information4. A 2 X4 knee wall, if insulated, should be to what R value? 5. The clearance between insulation and a furnace vent should be:
Weatherization -Basic Final Exam NAME 1. Infiltration is: a. Heat movement through solid materials b. The uncontrolled air flow through holes and cracks c. Heat flow through dead air spaces d. Heat transfer
More informationRS Chimney Fan for Solid Fuel Applications
Installation & Operating Manual RS Chimney Fan for Solid Fuel Applications USA CAN Product Information... Chapters 1 + 2 Mechanical Installation... Chapter 3 Electrical Installation... Chapter 4 Start
More informationNYS Building Performance Materials Category: Baseload
NYS Building Performance Materials 2018-2019 Category: Baseload Items bidding NON-Shut off Kitchen Aerators Shut Off Kitchen Aerators NON-Shut off Bathroom Sink Aerators Shut Off Bathroom Sink Aerators
More informationA. Codes and Standards that are Standard at the University:
PART 1: GENERAL 1.01 Purpose: 1.02 References: 1.03 Requirements: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The
More information