USTER INTELLIGIN-M APPLICATION REPORT. Monitoring of the ginning process THE GIN PROCESS CONTROL SYSTEM

Size: px
Start display at page:

Download "USTER INTELLIGIN-M APPLICATION REPORT. Monitoring of the ginning process THE GIN PROCESS CONTROL SYSTEM"

Transcription

1 USTER INTELLIGIN-M APPLICATION REPORT Monitoring of the ginning process THE GIN PROCESS CONTROL SYSTEM S. Dönmez Kretzschmar, A. Ellison April 2010 SE 639

2 Copyright 2010 by Uster Technologies AG All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, translated or transmitted in any form or by any means, electronically, mechanically, photocopying, recording or otherwise, without the prior permission in writing of the copyright owner. veronesi\tt\schulung_dokumente\on-line\intelligin\se-439_monitoring of the ginning process 2 (20) USTER PRODUCTS

3 Contents 1 Introduction The total quality control of the ginning process What is the function of a cotton gin? Why we should monitor the ginning process? Benefits and the opportunities of the USTER INTELLIGIN System Features The USTER INTELLIGIN M organization The USTER INTELLIGIN-M Reports Field Test Conclusion Literature USTER PRODUCTS 3 (20)

4 4 (20) USTER PRODUCTS

5 1 Introduction After the harvest, a producer wants the optimum yield possible and the spinner wants the highest quality fiber available. The ginner is asked to make both happen. Cotton ginning is an important step in the cotton production sequence. The purpose of the ginning operation is separating the cotton seed from the lint and removing sticks and coarse trash from the input material. Input materials coming from a variety of growing areas are processed together and the process acts as a first blending of massive quantities of fibers [1]. The true art of ginning is knowing when and how to use a technical advantage. Because not all cottons are the same, the ginning process requires constant monitoring based on incoming harvest qualities, fiber characteristics, picking methods and growing conditions. The USTER INTELLIGIN-M monitors and/or controls the ginning process through a system of online sampling stations located throughout the gin from the module feeder to the bale press. Information on fiber moisture, trash and color are fed into a main console where software analyzes fiber value for optimum dryer temperature and lint cleaning practices. Optional bypass valves automatically reroute cotton only through necessary equipment preserving fiber quality and reducing processing costs. From an easyto-use console, the ginner has a complete picture of all variables and can manually adjust the process or set perimeters to allow the process to run automatically. The USTER INTELLIGIN-M provides total quality control of the ginning process. 2 The total quality control of the ginning process 2.1 What is the function of a cotton gin? The principal function of the cotton gin is to separate lint from seed. The gin must also be equipped to remove foreign matter, moisture, and other contaminants that significantly reduce the value of the ginned lint. Gins (Fig. 1) must produce a quality of lint that brings the owner of the cotton maximum value while meeting the demands of the spinner and consumer. Cotton seed is an important by-product of cotton manufacture and most of the seed is crushed for oil or used for animal feed. According to the yarn producer, cotton seed represents hazard and excessive seed-coat fragments make the spinning process more difficult. USTER PRODUCTS 5 (20)

6 Fig. 1 Gin On the other hand, the economics of ginning are affected by the sale of byproducts, and thus they have some effect on the cost of the cotton mill. The cost of the cotton in the mill represents roughly half of the yarn cost. Not only the cost but also the quality of the product depends the total quality control of the ginning process Therefore the yarn producer must have a strong interest in the basic fiber production [1]. Fig. 2 Cotton lint and cotton seed Cotton Ginning Transportation to warehouse Warehousing / Storage Transportation to mill Preparation in Mill Fig. 3 Fiber Flow Field to Sliver 6 (20) USTER PRODUCTS

7 2.2 Why we should monitor the ginning process? We should monitor the ginning process because the cotton is a huge variable with different: Cotton Varieties Fiber Characteristics Picking Methods (Spindle stripper hand ) Growing Conditions Harvest Conditions Market Changing Requirements Domestic Export Because not all cottons are the same, the ginning process requires constant monitoring based on incoming harvest qualities, fiber characteristics, picking methods and growing conditions. The USTER INTELLIGIN-M monitors and/or controls the ginning process through a system of online sampling stations located throughout the gin from the module feeder to the bale press. Information on fiber moisture, trash and color are fed into a main console where software analyzes fiber value for optimum dryer temperature and lint cleaning practices. The USTER INTELLIGIN provides total quality control of the ginning process (Fig. 4). Thus the ginner has a complete picture of all variables and can manually adjust the process or set perimeters to allow the process to run automatically. High Moisture Max Drying Intelligin Zone Maximum Advantage High Trash Domestic Export Low Trash Intelligin Minimum Advantage Low Moisture Min Drying Fig. 4 Process Control Decisions USTER PRODUCTS 7 (20)

8 2.3 Benefits and the opportunities of the USTER INTELLIGIN In Table 1 and in the following figures (Fig. 5 to Fig. 9) we can see the measurement and control opportunities and benefits of the USTER IN- TELLIGIN-M during the ginning process. Ginning Process Sections of Gin Measurement Opportunities Control Opportunites Benefits Figure Seed Cotton Entry Into Gin 1. Module Feeder 2. Suction Telescopes 3. Big-J Feed Control - Incoming Moisture - Incoming Trash - Feed Rate Seed Cotton - Gin Performance - Trash Levels Cleaning % Efficiency Fig. 5 Seed Cotton Cleaning & Drying 4. Vertical Flow Drier 5. Incline Cleaner 6. Stripper Cleaner 7. Stick Machine 8. Tower Drier 9. Incline Cleaner 10. Impact Cleaner - Temperature for Drying - Quantity of Pre- Cleaning Stages - Maximized Yield - Gin Performance - Fiber Quality (Length, Neps, Trash, Strength - Energy Costs Fig. 6 Ginning Separation of Seed and 11. Conveyor Distributor 12. Feeder 13. Gin Stand - Moisture - Temperature for Drying - Optimized Moisture for Ginning - Fiber Quality Fig. 7 Trash Removal From Lint 14. Centrifugal Cleaner D Tandem Lint Cleaners - Trash Level in Lint - Color - Moisture - Quantity of Lint Cleaners - Quantity Grid Bars (Louver Control) - Maximized Yield - Fiber Quantity No Unnecessary Cleaning - Fiber Quality - Maximized Value Based on Market Criteria Fig. 8 Baling Final Package 16. Battery Condenser 17. Covered Lint Slide 17. Moisture Addition 18. Belt Feeder 19. Bale Press 20. Bale Tying 21. Bale Bagging and Conveying - Trash Final - Color Final - Moisture in Lint After Cleaning - Moisture in Bale - Feedback to Prior Measurements - Moisture Restoration - Maximized Yield - Immediate Knowledge Grades for Merchandizing - Final Color & Trash Grades for Allocation & Storage - Final Moisture Optimized - Warehousing Efficiencies Fig. 9 Table 1 The measurement and control opportunities and benefits of the USTER INTELLIGIN -M 8 (20) USTER PRODUCTS

9 Fig. 5 Seed Cotton Entry Into Gin Fig. 6 Seed Cotton Cleaning & Drying Fig. 7 Ginning - Separation of Seed and Lint Fig. 8 Trash Removal From Lint Fig. 9 Baling - Final Package USTER PRODUCTS 9 (20)

10 3 System Features The basic USTER INTELLIGIN-M system is for monitoring, information, and database collection purposes only. The system includes one measurement station at lint flue. The USTER INTELLIGIN-M system provides leaf grade, % trash, color grade, extraneous matter identification, and lint moisture measurement at lint flue. Reports on machine use, moisture, leaf and color as well as gas & electricity use on a per bale basis if outputs are provided. There are also some additional available options or measurements: Louvered Grid Bar Control Incoming module moisture Final Bale moisture Energy Monitoring Machine Efficiency Monitoring The Monitor system gives gins with hands on management the necessary tools for processing quality cotton. This system will monitor the gin process from manual changes and adjustments. Ginners can use realtime information to make decisions for setting dryer temperatures and determining leaf grades. The Control system constantly controls the gin to set specifications without constant manual changes, leaving the ginner to focus on labor and maintenance issues. Monitor or Control system Real-time measurement of fiber color, trash and moisture Patented color and trash sensor technology to HVI modules Reporting software for an up-to-the-minute data analysis Control system only Patented decision making software algorithms Main console with touch screen controls that integrates into current gin control database Automatic control of dryer temperature for optimum fiber moisture Automatic control of seed cotton and lint cleaner bypass valves 10 (20) USTER PRODUCTS

11 3.1 The USTER INTELLIGIN M organization The following diagrams shows us the USTER INTELLIGIN-M organization and the system layout of the sampling station and the USTER INTELLIGIN host console in the gin (Fig. 10 and Fig. 11). Gin Office Gin Internet Real Time Display Real Time Display Remote Service and Support Process Measurements Reports Remote Monitoring by Gin Mgmt USDA Information Input for Calibration Gin Console Sampling Station Fig. 10 The USTER INTELLIGIN M organization IntelliGin host console Sampling Station Fig. 11 System layout in the gin The system has a sampling station and a host console. Positioned just past the lint cleaners, this station gives a final reading of fiber moisture, trash and color to ensure the accuracy of the decisions made before cotton enters the bale press. This information is used to give feedback to ginners so that they might make adjustments to the ginning process to optimize fiber qualities, yield and moisture content (Fig. 12 and Fig. 13) USTER PRODUCTS 11 (20)

12 Fig. 12 Lint Flue Sampling Station Fig. 13 Lint Flue Sampling Station In Fig. 14, we can see the sampling station and all sensors such as paddle sampler, moisture measuring sensor and the USTER HVI color head. Paddle Sampler Moisture Measuring Sensor HVI Color Head Fig. 14 Sampling Station Open, showing all sensors 12 (20) USTER PRODUCTS

13 The main console gives the ginner a complete summary of the ginning process. It provides information that is necessary for the ginner to make informed decisions to improve fiber moisture levels, and preserve fiber properties (Fig. 15). Fig. 15 Gin Host Console By using this system, the user can make reliable cotton value decisions by using real time information which is obtained by the USTER INTELLIGIN M. Classer s Trash Leaf Grade Measurement (% area) 1 <= <= <= <= <= 0.55 Too little cleaning may allow higher grade creating discount Lint Bale Cleaners Weight Too much cleaning costs yield, as much as 8# for second LC The ginner will learn that in some cases better leaf grade is not possible. Then the best strategy is to maximize yield by accepting the discount. Length 32nds nds HVI Length (Inches) Too much cleaning will shorten fiber. Fig. 16 the USTER INTELLIGIN M Organization In Fig. 17 we can see the special model of the USTER INTELLIGIN-M which is primarily for Texas developed. The benefits are given in Table 2. Fig. 17 shows the indication of bark and grass in the cotton. USTER PRODUCTS 13 (20)

14 Specification Measurement Opportunities Control Opportunites Benefits Indication of bark and grass Automatic Bark & Grass Detection Quick feedback to producer Optimized ginning decisions Reduced discounts if ginning procedures will reduce contamination Table 2 The measurement and control opportunities and benefits of the USTER INTELLIGIN-M Texas Fig. 17 Indication of Bark and Grass 3.2 The USTER INTELLIGIN-M Reports The USTER INTELLIGIN-M gives the user easy-to-read graphical reports and provide summaries and in-depth analysis of bale characteristics for producers (Fig. 18). Fig. 18 Report 14 (20) USTER PRODUCTS

15 The trends for process improvement are also available for gin administration (Fig. 19). Fig. 19 Display of the USTER IN- TELLIGIN The reporting package delivers analytical reports that detail every level of the ginning process. Reports such as color grade, leaf grade and moisture provide value to producers, while production and shift reports are essential to improving gin profitability.the monitoring of the final bale moisture enables the ginner to see the realtime results of the ginning process as it affects the moisture of cotton (Fig. 20). Fig. 20 Graphs of the bales USTER PRODUCTS 15 (20)

16 Moisture of cotton is critical when decisions are being made to optimize the dryer settings. The final bale moisture sensor also allows the ginners to see the results of any supplemental moisture restoration system. Research shows that optimum moisture level in a bale is 7.5%, matching USDA conditions for classing cotton. Achieving this balance depends on accurate measurements throughout the ginning process (Fig. 21). Fig. 21 Actual dryer temperatures 4 Field Test During a field test, we have taken cotton from the same cotton field. The yield has been made under the same conditions and the same amount of raw material has been processes first time by using (active) the USTER INTELLIGIN and the second time without using (passive) the USTER IN- TELLIGIN. These cotton bales are tested by using the USTER HVI. When we look at the percentage of the total measured bales which are ginned with the USTER INTELLIGIN, the fibers shorter than 34 mm are only 1%. The bales which have fiber lengths of 37 mm or more have a percentage of 70%. On the contrary, the bales which are ginned without the USTER IN- TELLIGIN have generally lower mean length values (Fig. 22). 16 (20) USTER PRODUCTS

17 Without Intelligin 58 With Intelligin < > 37 Fig. 22 USTER HVI length values When we look at the percentage of the total measured bales which are ginned with the USTER INTELLIGIN, the fibers with a strength value of 28 or less are only 24%. The bales which have fiber strength of 30 [cn/tex] or more have a percentage of 52%. On the contrary, the bales which are ginned without the USTER INTELLIGIN have generally lower mean strength values (Fig. 23) Without Intelligin With Intelligin < > 30 Fig. 23 USTER HVI strength values In Fig. 24, we can see that the bales which are ginned with the USTER INTELLIGIN have generally better uniformity values. USTER PRODUCTS 17 (20)

18 Without Intelligin With Intelligin Fig. 24 USTER HVI uniformity values In Fig. 25, we can see the quality characteristics of the cotton fibers. The mean values of neps, the upper quartile length (w) and short fiber content are given. According to the USTER AFIS values, we can easily see the positive effect of the USTER INTELLIGIN on the fiber quality (Fig. 25) Without Intelligin With Intelligin Neps [1/g] 16 Seed Coat Neps [1/g] UQL [mm] SFC [%] Fig. 25 USTER AFIS values 18 (20) USTER PRODUCTS

19 5 Conclusion The USTER INTELLIGIN -M provides a cotton ginner with critical data, enabling the gin to process for weight and grade optimization. Using patented sensor technology, the USTER INTELLIGIN-M monitors the ginning process quality through a system of online sampling stations. Online measurements provide information on moisture, color and trash for optimum processing. The special software analyzes the fiber quality for optimum dryer temperature and cleaning practices. Cotton is not over- or underdried or over- or undercleaned preserving grade and bale weight. With the optional final bale moisture system, the USTER INTELLIGIN also ensures that producers get the most value for their cotton while preserving fiber quality. 6 Literature 1. Lord, P. R., Handbook of Yarn Production: Technology, Science and Economics, Woodhead Publishing Limited, USTER PRODUCTS 19 (20)

20 Uster Technologies AG Sonnenbergstrasse 10 CH-8610 Uster / Switzerland Phone Fax sales@uster.com 20 (20) USTER PRODUCTS

Ginning and Classing. Ginning Basics

Ginning and Classing. Ginning Basics Ginning and Classing The function of the gin is to separate lint from gin to create two marketable products, fiber and seed. The gin must also be equipped to remove foreign matter, control moisture and

More information

Saw-type lint cleaners are the most common

Saw-type lint cleaners are the most common The Journal of Cotton Science 12:246 252 (2008) http://journal.cotton.org, The Cotton Foundation 2008 246 ENGINEERING AND GINNING Lint with Two Air-jet Cleaners in Series S. Le* ABSTRACT The performance

More information

Contamination, Trash and Moisture Control in Ginning & Pressing Factories

Contamination, Trash and Moisture Control in Ginning & Pressing Factories Contamination, Trash and Moisture Control in Ginning & Pressing Factories Paper by Dr. M. K. Sharma, President, Bajaj Steel Industries Limited, Nagpur, India. For Publication in Souvenir on the occasion

More information

SAMUEL JACKSON DRYING SYSTEMS Background and Design Principles

SAMUEL JACKSON DRYING SYSTEMS Background and Design Principles SAMUEL JACKSON DRYING SYSTEMS Background and Design Principles The name Samuel Jackson has been known for many years in the field of cotton humidification. The study of fiber moisture characteristics has

More information

( 2 of 52 ) United States Patent 6,557,213 Winn May 6, 2003 Closed loop push/pull system for a cotton gin Abstract A closed loop push/pull system of the present invention employs a hot shelf tower dryer

More information

TECHNOLOGICAL ADVANCES IN DOUBLE ROLLER GIN PLANT MACINERIES IN INDIA DURING

TECHNOLOGICAL ADVANCES IN DOUBLE ROLLER GIN PLANT MACINERIES IN INDIA DURING TECHNOLOGICAL ADVANCES IN DOUBLE ROLLER GIN PLANT MACINERIES IN INDIA DURING 2010-2016 By Dr. M. K. Sharma Whole Time Director & CEO, Bajaj Steel Industries Ltd, Nagpur, India At 7 th Asian Cotton Research

More information

DESIGN OF COTTON GINNING DRYER CONTROL SYSTEM

DESIGN OF COTTON GINNING DRYER CONTROL SYSTEM DESIGN OF COTTON GINNING DRYER CONTROL SYSTEM I.Maradzano 1*, L.Nyanga 2, A.V Merwe 2, Z.B Dlodlo 1, T.R Chikowore 1, S Mhlanga 3 1 Department of Industrial and Manufacturing Engineering National University

More information

Automation in Cotton Ginning

Automation in Cotton Ginning Automation in Cotton Ginning Murali Siddaiah, Michael A. Lieberman Nadipuram R. Prasad 4 and S. E. Hughs 3 Klipsch School of Electrical Southwestern Cotton Ginning and Computer Engineering Research Laboratory

More information

Fiber Preparation. VARIOline. VARIOline. VARIOline. The variable concept for optimal fiber preparation

Fiber Preparation. VARIOline. VARIOline. VARIOline. The variable concept for optimal fiber preparation Fiber Preparation VARIOline VARIOline VARIOline The variable concept for optimal fiber preparation OUTSTANDING BENEFITS 2 000-Kilogram Line Production Per Hour... 05 Save up to 1% of Raw Material... 07

More information

ENGINEERING & GINNING

ENGINEERING & GINNING The Journal of Cotton Science 20:375 385 (2016) http://journal.cotton.org, The Cotton Foundation 2016 375 ENGINEERING & GINNING Removal of Sheet Plastic Materials from Seed Cotton Using a Cylinder Cleaner

More information

26/10/17. Best Ginning Practices to Enhance Efficiency, Preserve Quality & Increase Cotton Fibre Output.

26/10/17. Best Ginning Practices to Enhance Efficiency, Preserve Quality & Increase Cotton Fibre Output. 26/10/17 Best Ginning Practices to Enhance Efficiency, Preserve Quality & Increase Cotton Fibre Output. By Dr. M. K. Sharma, Whole Time Director & CEO of Bajaj Steel Industries Ltd, Nagpur, Maharashtra,

More information

Cotton Humidification Systems. from Samuel Jackson, Incorporated. Copyright 2002 SAMUEL JACKSON, INCORPORATED. All rights reserved

Cotton Humidification Systems. from Samuel Jackson, Incorporated. Copyright 2002 SAMUEL JACKSON, INCORPORATED. All rights reserved Cotton Humidification Systems from Samuel Jackson, Incorporated Copyright 2002. All rights reserved A BRIEF WORD ABOUT OUR COMPANY... Samuel Jackson s Lubbock, Texas Factory and Offices Cotton conditioning

More information

Gin-Fiber Cleaning Unit for Producing Improved Fiber

Gin-Fiber Cleaning Unit for Producing Improved Fiber Gin-Fiber Cleaning Unit for Producing Improved Fiber AgzamovMirsolix, OlimovOdiljonTursunmurodovich Doctor of Technical Sciences, Tashkent Institute of Textile and Light Industry, Uzbekistan. Senior lecturer,

More information

: WHOM IT MAY CONCERN DATE : REFERENCE : LP.POS.0034 COMPLETE OPEN END PLANT

: WHOM IT MAY CONCERN DATE : REFERENCE : LP.POS.0034 COMPLETE OPEN END PLANT TO : WHOM IT MAY CONCERN DATE : 18.11.2008 REFERENCE : LP.POS.0034 COMPLETE OPEN END PLANT COMPLETE OPEN END PLANT FOR BLENDS COTTON, POLYESTER AND VISCOSE YARNS 01 BDT 19 TRUTZSCHELER Blendomat working

More information

Application Guide. IIoT enabled Intelligent Battery Management

Application Guide. IIoT enabled Intelligent Battery Management Application Guide IIoT enabled Intelligent Battery Management Small stationary batteries provide critical local backup power reserve in numerous applications. Lead acid batteries are well established technology

More information

Impact of Relative Humidity on Loom Shed Efficiency

Impact of Relative Humidity on Loom Shed Efficiency Impact of Relative Humidity on Loom Shed Efficiency Prof. Tushar C. Patil, Asst. Professor, Centre for Textile Functions, MPSTME, Shirpur. Mr. Raquim Momin, B.Tech 3 rd Year, Centre for Textile Functions,

More information

Short Staple Pre-Spinning Machinery at ITMA 03

Short Staple Pre-Spinning Machinery at ITMA 03 Short Staple Pre-Spinning Machinery at ITMA 03 Volume 3, Issue 3, Fall 2003 Wade Carter N.C. State University, College of Textiles, Extension and Applied Research Email: wade_carter@ncsu.edu ABSTRACT Short

More information

BALE BREAKER AND OPENERS

BALE BREAKER AND OPENERS BALE BREAKER AND OPENERS 13 Automatic Bale Plucker is used to mechanically strip fibres from pressed bales and automatically drop the fibre on to the feed table of the opening machinery at the beginning

More information

LEAF REMOVAL & WASHING

LEAF REMOVAL & WASHING capolinea.it Via Don Battistoni, 1-60035 Jesi (AN) Italy Phone +39 0731.2311- Fax +39 0731.231239 www.pieralisi.com - info@pieralisi.com Pictures and technical features are not binding. The company reserves

More information

DELTA CLEANERS 140 SERIES SEED PROCESSING CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE

DELTA CLEANERS 140 SERIES SEED PROCESSING CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE GB DELTA CLEANERS 140 SERIES SEED PROCESSING CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE EFFICIENCY AND PURITY IN THE CLEANING PROCESS CONSULTANCY BASED ON EXPERIENCE Accuracy

More information

DeltaV Analyze. Introduction. Benefits. Continuous automated DeltaV System alarm system performance monitoring

DeltaV Analyze. Introduction. Benefits. Continuous automated DeltaV System alarm system performance monitoring DeltaV Distributed Control System Product Data Sheet December 2016 DeltaV Analyze Continuous automated DeltaV System alarm system performance monitoring Trends of alarms, events, and user actions Identification

More information

SWISS TEXTILE MACHINERY SEMINAR. April 25-26, 2016 Hotel Simorgh, Theran

SWISS TEXTILE MACHINERY SEMINAR. April 25-26, 2016 Hotel Simorgh, Theran SWISS TEXTILE MACHINERY SEMINAR April 25-26, 2016 Hotel Simorgh, Theran By: Peter Fallegger Regional Sales Manager Swiss Textile Machinery Seminar April 2016 I Page 1 Luwa s History in Short Swiss Textile

More information

DECREASE PRODUCTION COSTS IN A COTTON SPINNING MILL BY AGGREGATISATION MACHINES. IONEL BARBU, Ph.D.Professor, Aurel Vlaicu University, Arad, ROMANIA

DECREASE PRODUCTION COSTS IN A COTTON SPINNING MILL BY AGGREGATISATION MACHINES. IONEL BARBU, Ph.D.Professor, Aurel Vlaicu University, Arad, ROMANIA DECREASE PRODUCTION COSTS IN A COTTON SPINNING MILL BY AGGREGATISATION MACHINES IONEL BARBU, Ph.D.Professor, Aurel Vlaicu University, Arad, ROMANIA ABSTRACT: In the cotton spinning mill was reached that

More information

PAPER INDUSTRY PROCESS DESCRIPTION

PAPER INDUSTRY PROCESS DESCRIPTION PAPER INDUSTRY PROCESS DESCRIPTION Paper Industry PROCESS DESCRIPTION SUMMARY- PART 1. PAPER PASTE GENERATION 1. Raw material 2. First paper separation 3. Second paper separation 2 Paper Industry PROCESS

More information

Spinning Preparation Double-Head Draw Frame SB-D 26 SB-D 26. Double-Head Draw Frame SB-D 26. Highest productivity using minimal space

Spinning Preparation Double-Head Draw Frame SB-D 26 SB-D 26. Double-Head Draw Frame SB-D 26. Highest productivity using minimal space Spinning Preparation Double-Head Draw Frame SB-D 26 SB-D 26 Double-Head Draw Frame SB-D 26 Highest productivity using minimal space Depending on the fiber material, the double-head draw frame produces

More information

Nedap Cow Positioning with integrated Heat Detection and Health Monitoring

Nedap Cow Positioning with integrated Heat Detection and Health Monitoring UK System Infosheet with integrated Heat Detection and Health Monitoring Labour efficiency is a constant point for attention at the continuously expanding dairy farms of today: how can we work in an optimally

More information

Influence of the Cotton-Raw Drying Regime in Drum Dryer on the Density Part of the Defects and Litter Impurities in Fiber

Influence of the Cotton-Raw Drying Regime in Drum Dryer on the Density Part of the Defects and Litter Impurities in Fiber Influence of the Cotton-Raw Drying Regime in Drum Dryer on the Density Part of the Defects and Litter Impurities in Fiber Parpiyev A.P., Kayumov A.H. P.G. Professor, Tashkent Institute of Textile and Light

More information

Fläkt Dryer World leading pulp drying technology We accept the challenge!

Fläkt Dryer World leading pulp drying technology We accept the challenge! www.andritz.com Fläkt Dryer World leading pulp drying technology We accept the challenge! The Fläkt Dryer for High Quality Pulp The Fläkt Dryer is the result of expericence gained from more than 500 pulp

More information

BLOW ROOM GETTING FIBERS INTO SHAPE

BLOW ROOM GETTING FIBERS INTO SHAPE BLOW ROOM GETTING FIBERS INTO SHAPE BLOW ROOM 4 it s true 8 Discovering technology COTTON INSTALLATION...10 MAN-MADE FIBER INSTALLATION...12 WASTE RECYCLING INSTALLATION...14 TUFT BLENDING INSTALLATION...

More information

Effective Biomass Moisture Control

Effective Biomass Moisture Control Effective Biomass Moisture Control By John Robinson Drying Technology, Inc P.O. Box 1535 Silsbee, TX 77656 409-385-6422/6537fax john@moistureconrols.com www.moisturecontrols.com Presented at The Timber

More information

EN l Evolution Cube. Evolution Cube. Fully automatic separating and feeding of towels

EN l Evolution Cube. Evolution Cube. Fully automatic separating and feeding of towels EN l Evolution Cube Evolution Cube Fully automatic separating and feeding of towels The Evolution Cube at a glance: Fully automatic separation, feeding and folding of Towels Separation Detection of corners

More information

ISO INTERNATIONAL STANDARD. Coating powders Part 13: Particle size analysis by laser diffraction

ISO INTERNATIONAL STANDARD. Coating powders Part 13: Particle size analysis by laser diffraction INTERNATIONAL STANDARD ISO 8130-13 First edition 2001-09-01 Coating powders Part 13: Particle size analysis by laser diffraction Poudres pour revêtement Partie 13: Analyse granulométrique par diffraction

More information

FLAVOUR APPLICATION SYSTEMS

FLAVOUR APPLICATION SYSTEMS FLAVOUR APPLICATION SYSTEMS Doug Hanify Spray Dynamics Ltd. Flavour application systems Seasoning systems most commonly used in savoury snacks: Conveyor based dusting system (typically salt) Drum based

More information

ISO INTERNATIONAL STANDARD. Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels

ISO INTERNATIONAL STANDARD. Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels INTERNATIONAL STANDARD ISO 3864-2 First edition 2004-10-15 Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels Symboles graphiques Couleurs de sécurité

More information

CHOOSING THE OPTIMUM REGIME FOR DRYING RAW COTTON IN DRUM DRIER

CHOOSING THE OPTIMUM REGIME FOR DRYING RAW COTTON IN DRUM DRIER SOCIAL SCIENCE AND HUMANITIES Manuscript info: Received September 14, 2018., Accepted October 12, 2018., Published October 30, 2018. CHOOSING THE OPTIMUM REGIME FOR DRYING RAW COTTON IN DRUM DRIER Parpiev

More information

Potato Chip Processing Systems

Potato Chip Processing Systems Potato Chip Processing Systems Since the inception of industrial snack food production, Heat and Control and potato chip manufacturers have met every challenge to achieve higher capacities, lower production

More information

JCD Jog Conveyor Dryer

JCD Jog Conveyor Dryer JCD Jog Conveyor Dryer Purposes & and Principles of Operation Jog Conveyor Dryers are mainly used after the coating process to prevent wet kernels from clumping together during bagging off. Due to very

More information

ISO 3758 INTERNATIONAL STANDARD. Textiles Care labelling code using symbols. Textiles Code d'étiquetage d'entretien au moyen de symboles

ISO 3758 INTERNATIONAL STANDARD. Textiles Care labelling code using symbols. Textiles Code d'étiquetage d'entretien au moyen de symboles INTERNATIONAL STANDARD ISO 3758 Second edition 2005-04-01 Textiles Care labelling code using symbols Textiles Code d'étiquetage d'entretien au moyen de symboles Reference number ISO 2005 Provläsningsexemplar

More information

IRD INFRARED ROTARY DRUM HEATING. DRYING. CRYSTALLIZING. COATING.

IRD INFRARED ROTARY DRUM HEATING. DRYING. CRYSTALLIZING. COATING. IRD INFRARED ROTARY DRUM HEATING. DRYING. CRYSTALLIZING. COATING. MINIMAL PROCESSING TIMES HIGH FLEXIBILITY LOW ENERGY CONSUMPTION KREYENBORG is a leading provider of solutions in the field of bulk material

More information

PAMA PRODUCT PASTEURIZATION, HEATING AND COOLING SYSTEMS

PAMA PRODUCT PASTEURIZATION, HEATING AND COOLING SYSTEMS PAMA PRODUCT PASTEURIZATION, HEATING AND COOLING SYSTEMS PAMA HIGH PERFORMANCES WITH NO WASTE Pama pasteurizers are a cut above competitors products thanks to the innovative and exclusive philosophy for

More information

Mechanical Redesign, Proposal Elizabeth C. Krauss Mechanical Option September 18, 2013

Mechanical Redesign, Proposal Elizabeth C. Krauss Mechanical Option September 18, 2013 Mechanical Redesign, Proposal Elizabeth C. Mechanical Option September 18, 2013 State Institute of Rehabilitation T e c h n i c a l R e p o r t I 1 Mechanical Redesign, Proposal... 0 Executive Summary...

More information

+91-8048761972 Bajaj Steel Industries Limited http://www.bajajsteelindustries.com/ We are engaged in manufacturing, supplying and exporting a wide range of Industrial Machines, Material Handling Equipment

More information

Quality Construction Equipment

Quality Construction Equipment Quality Construction Equipment ASPHALT BATCH MIX PLANT ANP Series - 60 to 240 tph ASPHALT BATCH MIX PLANT Apollo has always been proactive in rising to customer demands and expectations by providing quality

More information

AUTOMATIC SOLUTION FOR CONTINUOUS OUTPUT OF MILL-SIZE BALES

AUTOMATIC SOLUTION FOR CONTINUOUS OUTPUT OF MILL-SIZE BALES ORWAK HORIZONTAL AUTOMATIC SOLUTION FOR CONTINUOUS OUTPUT OF MILL-SIZE BALES CENTRALIZED WASTE HANDLING Fully automated horizontal balers meet the challenges presented by centralized waste handling in

More information

UNiVERSAl SERiES SHREDDER-FEEDER-EXTRUDER COmBiNATiON A:GRAN.

UNiVERSAl SERiES SHREDDER-FEEDER-EXTRUDER COmBiNATiON A:GRAN. UNiVERSAl SERiES SHREDDER-FEEDER-EXTRUDER COmBiNATiON A:GRAN > ONE-STEP technology > Process bulky plastic scrap > One-button automatic On/Off control > DUmP and RUN operation www.ngr.at TECHNOlOGY THE

More information

QuadraTouch Pro Software Manual Dryer Control System

QuadraTouch Pro Software Manual Dryer Control System QuadraTouch Pro Software Manual Dryer Control System Software is constantly changing. Make sure you are up to date with Sukup s newest software. New software and manuals are available for download at:

More information

Machine Diagnostics in Observer 9 Standard Rules

Machine Diagnostics in Observer 9 Standard Rules Application Note Machine Diagnostics in SKF @ptitude Observer 9 Standard Rules Introduction The diagnostics in SKF @ptitude Observer are used as a tool to diagnose the captured data. Using machine diagnostic

More information

u JOSSI FIRE SHIELD U JOSSI METAL SHIELD U JOSSI COMBO SHIELD Technical Data

u JOSSI FIRE SHIELD U JOSSI METAL SHIELD U JOSSI COMBO SHIELD Technical Data u JOSSI FIRE SHIELD U JOSSI METAL SHIELD U JOSSI COMBO SHIELD Technical Data February 2018 USTER JOSSI FIRE SHIELD Scope of delivery USTER JOSSI FIRE SHIELD Basic equipment and parts Documentation Accessories

More information

Extruders Advanced feed production technology

Extruders Advanced feed production technology Extruders Advanced feed production technology www.andritz.com/ft The advanced single-screw extrusion concept Single-screw extrusion concept EX 0618-0621 series EX 1021 series ANDRITZ extruders provide

More information

INDUSTRY APPLICATIONS

INDUSTRY APPLICATIONS INDUSTRY APPLICATIONS Cognex... for every step of the PV Supply Chain Solar Photovoltaic (PV) Cells and Modules Confidence, Every Step of the Way Whether it s using vision for alignment rather than mechanical

More information

ENERGY SAVING & CO2 FOOTPRINT REDUCTION BROCHURE

ENERGY SAVING & CO2 FOOTPRINT REDUCTION BROCHURE ENERGY SAVING & CO2 FOOTPRINT REDUCTION BROCHURE 2 SMARTEPRODUCTBROCHURE ENERGY SAVING IS OUR MAIN GOAL THE END RESULT LETS YOU MONITOR, MEASURE AND OPTIMIZE BUILDING AND SALES DIGITALISATION & PLANNING

More information

Product range storage technology

Product range storage technology POTATO TECHNOLOGY BEET TECHNOLOGY VEGETABLE TECHNOLOGY Product range storage technology Gentle storing harvesting success! Only crop that is stored in a healthy condition will also be in a healthy state

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD IEC 61968-4 First edition 2007-07 Application integration at electric utilities System interfaces for distribution management Part 4: Interfaces for records and asset management

More information

SCZ-bro-CBCL EN

SCZ-bro-CBCL EN Saurer (Changzhou) Textile Machinery Co., Ltd. 558 Huixian Road, Jintan District, Jiangsu Province P.R.China 213200 Sales phone: (+86) 519 82314836 Service phone: (+86) 519 82319915 Fax: (+86) 519 82319916

More information

MES COURSE MODULES IN TEXTILES COTTON SPINNING

MES COURSE MODULES IN TEXTILES COTTON SPINNING MES COURSE MODULES IN TEXTILES COTTON SPINNING 1. Module Name Draw frame Tenter & Cleaner 2. Sector Textiles Cotton Spinning 3. Code SPG 701 4. Entry Qualification Minimum 7th Standard and 14 years of

More information

Model : LPSA-40A Please read this manual carefully before using the instrument Labnics Equipment

Model : LPSA-40A Please read this manual carefully before using the instrument Labnics Equipment DRY & WET DISPERSION PARTICLE SIZE ANALYZER Instruction Manual Model : LPSA-40A Please read this manual carefully before using the instrument Labnics Equipment Table of Content CHAPTER CONTENT PAGE No.

More information

M-Sens 2 Application overview. FlowJam application overview. Online moisture measurement for solids. For measuring capillary and surface humidity

M-Sens 2 Application overview. FlowJam application overview. Online moisture measurement for solids. For measuring capillary and surface humidity Online moisture measurement for solids "Supplying intelligent measuring systems for industry since 1994" Development + Production + Sales + Commissioning + After-Sales FlowJam application overview For

More information

Carding and prior processes for short-staple fibers 5.1 Introduction

Carding and prior processes for short-staple fibers 5.1 Introduction 5 Carding and prior processes for short-staple fibers 5.1 Introduction Short-staple fibers are nearly always processed dry using mechanical means. The first stages in a short-staple spinning mill comprise

More information

TOWER DRYERS TOTA TOT L VA AL V LUE. TOTA ALUE. TOT L SYSTEMS. AL SYSTEMS.

TOWER DRYERS TOTA TOT L VA AL V LUE. TOTA ALUE. TOT L SYSTEMS. AL SYSTEMS. TOWER DRYERS TOTAL VALUE. TOTAL SYSTEMS. 1 GSI FEATURES 1 Gravity inlet does not require leveling auger, reducing the number of moving parts. 2 3 2 Self cleaning cushion box on plenum roof reduces grain

More information

Crushing Principles of Mechanical Crushing

Crushing Principles of Mechanical Crushing Crushing Principles of Mechanical Crushing Objective Explain the interaction between rock material and crusher Take home messages Agenda Crusher Application Cone Crusher Operating Principle Crusher Capacity

More information

The green and friendly entrance. Comfort air curtains Model CA 2

The green and friendly entrance. Comfort air curtains Model CA 2 The green and friendly entrance Comfort air curtains Model CA 2 Energy saving and userfriendly air curtain Model CA 2 is the newest addition to the series Biddle comfort air curtains. It is Biddle s conviction

More information

Automation and Energy Efficiency of Industrial Refrigeration Systems

Automation and Energy Efficiency of Industrial Refrigeration Systems Automation and Energy Efficiency of Industrial Refrigeration Systems E360 Forum Chicago, IL October 5, 2017 Mike Micak Director of Sales Logix Controls Introduction Management thinker Peter Drucker was

More information

Continuous mobile asphalt plant

Continuous mobile asphalt plant A WIRTGEN GROUP COMPANY Continuous mobile asphalt plant inova 2000 www.ciber.com.br ciberoficial 02 03 Innovation is the best definition for the asphalt plant inova 2000. The most modern technology for

More information

CCLEARFIRE CONDENSING FIRETUBE BOILER DESIGNED FOR MAXIMUM HYDRONIC SYSTEM EFFICIENCY 500 TO 3,300 MBTU

CCLEARFIRE CONDENSING FIRETUBE BOILER DESIGNED FOR MAXIMUM HYDRONIC SYSTEM EFFICIENCY 500 TO 3,300 MBTU CCLEARFIRE CONDENSING FIRETUBE BOILER DESIGNED FOR MAXIMUM HYDRONIC SYSTEM EFFICIENCY 500 TO 3,300 MBTU Unmatched Efficiency and Low-NOx Technology in a Condensing Boiler The ClearFire -C is a completely

More information

RECYCLING OF ADHESIVE TAPE WASTE WITH THE PLAST AGGLOMERATOR SYSTEM

RECYCLING OF ADHESIVE TAPE WASTE WITH THE PLAST AGGLOMERATOR SYSTEM RECYCLING OF ADHESIVE TAPE WASTE WITH THE PLAST AGGLOMERATOR SYSTEM Frank Maué, Product Sales Manager, Pallmann Maschinenfabrik GmbH & Co. KG, Zweibrücken, Germany Abstract During the production and processing

More information

CENTRICOATER SEED PROCESSING CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE

CENTRICOATER SEED PROCESSING CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE GB CENTRICOATER SEED PROCESSING CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE EFFECTIVE APPLICATION OF SEED TREATMENT MATERIAL MODERN COATING TECHNOLOGY FOR INCREASED GROWTH

More information

Washing systems/plants

Washing systems/plants Washing systems MODULAR AND FLEXIBLE n With a modular system from a simple wet granulator to a turnkey industrial washing line n Components for the optimization of existing washing plants n Wear resistant

More information

CARDING TECHNOLOGY. AUTEFA Solutions leads the way

CARDING TECHNOLOGY. AUTEFA Solutions leads the way CARDING TECHNOLOGY AUTEFA Solutions leads the way AUTEFA SOLUTIONS Experience, Know-How and Competence in Nonwoven Technology AUTEFA Solutions leads the way AUTEFA Solutions represents companies with a

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 18738-2 First edition 2012-10-15 Measurement of ride quality Part 2: Escalators and moving walks Mesure de la qualité de déplacement Partie 2: Escaliers mécaniques et trottoirs

More information

WCB Ice Cream. Introduces the. CREAM Freezer

WCB Ice Cream. Introduces the. CREAM Freezer WCB Ice Cream Introduces the CREAM Freezer It s NOT About Making the Coldest Ice Cream! It s About Making Better Ice Cream! The CREAM Freezer Produces Ice Cream With: Small Ice Crystal Size Small Air Cell

More information

Pumps SELECTION OF A PUMP

Pumps SELECTION OF A PUMP Pumps SELECTION OF A PUMP A water system needs to move the water produced from the source to its customers. In almost all cases in Minnesota, the source is at a lower elevation than the user so the water

More information

Screw Compressors AS SERIES. Capacities from: 59 to 124 cfm Pressures from: 80 to 217 psig

Screw Compressors AS SERIES. Capacities from: 59 to 124 cfm Pressures from: 80 to 217 psig Screw Compressors AS SERIES Capacities from: 59 to 124 cfm Pressures from: 80 to 217 psig Rotary Screw Compressor Maximum Reliability and Efficiency For years, customers have relied on Kaeser for reliable

More information

Couscous Instant pasta. Trend to perfection.

Couscous Instant pasta. Trend to perfection. Couscous Instant pasta. Trend to perfection. Uniform, productive, fully automatic. Couscous tradition paired with innovation. Outstanding appearance loose, round, and free-flowing Attractive, round dough

More information

Product Training Module: Inertial Measurement Unit 6-D Motion Variant 6DF Series. Copyright 2013 Honeywell International Inc. All rights reserved.

Product Training Module: Inertial Measurement Unit 6-D Motion Variant 6DF Series. Copyright 2013 Honeywell International Inc. All rights reserved. Product Training Module: Inertial Measurement Unit 6-D Motion Variant Copyright 2013 Honeywell International Inc. All rights reserved. Summary of Contents In this training module, you will learn the following

More information

Activities for K-5 Classroom

Activities for K-5 Classroom Activities for K-5 Classroom Alabama Agriculture in the Classroom May 2002 Xris McMillin Blonk Cotton Background Information Cotton plants require a long, sunny growing period with at least 160 frost-free

More information

Drying systems for grain and oil seeds. Schmidt-Seeger Eco Dry, Eco Cool, Eco Dry Flex.

Drying systems for grain and oil seeds. Schmidt-Seeger Eco Dry, Eco Cool, Eco Dry Flex. Drying systems for grain and oil seeds. Schmidt-Seeger Eco Dry, Eco Cool, Eco Dry Flex. Drying systems for grain and oil seeds. Schmidt-Seeger Eco Dry, Eco Cool, Eco Dry Flex. Proper conservation safeguards

More information

NEW CD WARP CONTROL SYSTEM FOR THE CORRUGATING INDUSTRY

NEW CD WARP CONTROL SYSTEM FOR THE CORRUGATING INDUSTRY NEW CD WARP CONTROL SYSTEM FOR THE CORRUGATING INDUSTRY USING A NEW CONCEPT IN MOISTURE SENSING AND CONTROL BY DRYING TECHNOLOGY, INC A New CD Warp Control System For the Corrugating Industry Introduction:

More information

SmartVFD HVAC and BYPASS

SmartVFD HVAC and BYPASS SmartVFD HVAC and BYPASS The Smart Choice for Energy Savings. Saving Energy the Smart Way Buildings consume more than 70 percent of the electricity produced in North America and roughly half of that is

More information

Corn drying experiments by pilot dryer

Corn drying experiments by pilot dryer Agronomy Research Biosystem Engineering Special Issue 1, 91-97, 2011 Corn drying experiments by pilot dryer L. Kocsis, M. Herdovics, J. Deákvári and L. Fenyvesi Hungarian Institute of Agricultural Engineering,

More information

HOW TO SELECT AN INDIRECT THERMAL TECHNOLOGY FOR INDUSTRIAL MATERIALS PROCESSING

HOW TO SELECT AN INDIRECT THERMAL TECHNOLOGY FOR INDUSTRIAL MATERIALS PROCESSING white paper HOW TO SELECT AN INDIRECT THERMAL TECHNOLOGY FOR INDUSTRIAL MATERIALS PROCESSING Better Thermal Processing Results Begin with Selecting the Right Technology Authored by Rob Grady Director of

More information

UNIVERSAL SERIES COMBINATION SHREDDER-FEEDER-EXTRUDER X:GRAN.

UNIVERSAL SERIES COMBINATION SHREDDER-FEEDER-EXTRUDER X:GRAN. UNIVERSAL SERIES COMBINATION SHREDDER-FEEDER-EXTRUDER X:GRAN > ONE-STEP technology > Process bulky plastic scrap > One-button automatic On/Off control > DUMP and RUN operation www.ngr.at TECHNOLOGY THE

More information

Land clearing and nursery bed establishment

Land clearing and nursery bed establishment Land clearing and nursery bed establishment 1m Land clearing and nursery bed establishment Week 1: Land preparation starts with clearing or cutting of all tall grasses, removing trees to avoid shade, stumps,

More information

Research Article Parameters Online Detection and Model Predictive Control during the Grain Drying Process

Research Article Parameters Online Detection and Model Predictive Control during the Grain Drying Process Mathematical Problems in Engineering Volume 213, Article ID 924698, 7 pages http://dx.doi.org/1.1155/213/924698 Research Article Parameters Online Detection and Model Predictive Control during the Grain

More information

Boretech China Make, Pet Bottles Recycling Line Ref Id SM4325 (Details-Specification mentioned hereunder are for indicative purpose only) DESIGN DATA 1.1 Capacity - PET bottles input : 1,500 kg/h - Dry

More information

Can extreme selection change expression of a quantitative trait in a population in one generation?

Can extreme selection change expression of a quantitative trait in a population in one generation? Big Idea 1 Evolution investigation 1 ARTIFICIAL SELECTION Can extreme selection change expression of a quantitative trait in a population in one generation? BACKGROUND Evolution is a process that has existed

More information

CLIMATE SEPARATION SOLUTION. SensAir

CLIMATE SEPARATION SOLUTION. SensAir CLIMATE SEPARATION SOLUTION SensAir SensAir comfort air curtain A new wave in climate separation SensAir air curtains are the ideal solution for retailers and other end-users to combat the issue of climate

More information

EASY FEED LITE FRICTION FEEDER OPERATOR MANUAL. Rev

EASY FEED LITE FRICTION FEEDER OPERATOR MANUAL. Rev EASY FEED LITE FRICTION FEEDER OPERATOR MANUAL Rev 02-04-13 SAFETY PRECAUTIONS THIS EQUIPMENT PRESENTS NO PROBLEM WHEN USED PROPERLY. OBSERVE THE FOLLOWING SAFETY RULES WHEN OPERATING THE RENA EASY FEED

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61508-5 First edition 1998-12 Functional safety of electrical/electronic/ programmable electronic safety-related systems Part 5: Examples of methods for the determination of

More information

FIBRE TECH. Finishing of Cotton Fibre

FIBRE TECH. Finishing of Cotton Fibre FIBRE TECH Finishing of Cotton Fibre FINISHING LINE FOR COTTON FIBRE Erbatech finishing equipment was developed in close cooperation with cotton fibre producers and meets highest standards in terms of

More information

piflow Conveyor Customer Code

piflow Conveyor Customer Code piflow Conveyor Customer piflow i/f piflow p piflow i/f piflow p Our Mission Model piflow i piflow f I F Pump size pibasic100 pibasic200 pibasic400 pibasic600 BA100 BA200 BA400 BA600 Filter type Textile

More information

Operation of multi-stage Drum Displacer and optimization possibilities with continuous process measurements

Operation of multi-stage Drum Displacer and optimization possibilities with continuous process measurements Operation of multi-stage Drum Displacer and optimization possibilities with continuous process measurements Placeholder for picture(s); the gray area must be filled COMPLETELY with one or more individual

More information

GRAIN STORAGE TURNKEY CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE

GRAIN STORAGE TURNKEY CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE GB GRAIN STORAGE TURNKEY CONVEYING DRYING SEED PROCESSING ELECTRONIC SORTING STORAGE TURNKEY SERVICE GRAIN STORAGE OPTIMUM GRAIN STORAGE FOR BETTER UTILIZATION OF NATURE S RESOURCES Cimbria is one of the

More information

Levels of Production

Levels of Production Levels of Production Syllabus Link: H1.1: Explains manufacturing processes and technologies used in the production of food products. Levels of Production All food manufacturers process and package foods

More information

MULTISITE. Multisite Activation. Microsoft Dynamics AX White Paper

MULTISITE. Multisite Activation. Microsoft Dynamics AX White Paper MULTISITE Microsoft Dynamics AX 2009 Multisite Activation White Paper Date: June 2008 Introduction... 3 Multisite activation... 4 Prerequisites... 4 Multisite activation update jobs... 5 Multisite activation

More information

Road vehicles Mopeds Symbols for controls, indicators and tell-tales

Road vehicles Mopeds Symbols for controls, indicators and tell-tales BSI Standards Publication Road vehicles Mopeds Symbols for controls, indicators and tell-tales NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW raising standards worldwide BRITISH

More information

ISO 7010 INTERNATIONAL STANDARD. Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas AMENDMENT 1

ISO 7010 INTERNATIONAL STANDARD. Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas AMENDMENT 1 INTERNATIONAL STANDARD ISO 7010 First edition 2003-10-01 AMENDMENT 1 2006-03-01 Graphical symbols Safety colours and safety signs Safety signs used in workplaces and public areas AMENDMENT 1 Symboles graphiques

More information

Spiralair SPR 2-30 TECHNOLOGY YOU CAN TRUST

Spiralair SPR 2-30 TECHNOLOGY YOU CAN TRUST Spiralair SPR 2-30 Oil-free compressors Industries such as pharmaceuticals, food and beverage, electronics and textiles cannot risk any chance of oil contamination in their processes. Therefore, it is

More information

Perimeter security using Fibre optics

Perimeter security using Fibre optics Perimeter security using Fibre optics Fibre optic sensors detect intrusion at the fence line. This technology provides a new dimension in detecting and locating fence line and perimeter intrusions. A laser

More information

ISO 3758 INTERNATIONAL STANDARD. Textiles Care labelling code using symbols. Textiles Code d'étiquetage d'entretien au moyen de symboles

ISO 3758 INTERNATIONAL STANDARD. Textiles Care labelling code using symbols. Textiles Code d'étiquetage d'entretien au moyen de symboles INTERNATIONAL STANDARD ISO 3758 Third edition 2012-04-01 Textiles Care labelling code using symbols Textiles Code d'étiquetage d'entretien au moyen de symboles Reference number ISO 2012 Provläsningsexemplar

More information

GOOD CARDED MEANS HALF SPINNING

GOOD CARDED MEANS HALF SPINNING GOOD CARDED MEANS HALF SPINNING Ionel Barbu, Aurel Vlaicu University, Arad, ROMANIA Adina Bucevschi, Aurel Vlaicu University, Arad, ROMANIA Monica Pustianu, Aurel Vlaicu University, Arad, ROMANIA Abstract:

More information