500W Stick Blender Set

Transcription

1 Operating Instructions 500W Stick Blender Set Item: FSB390

2 General care and safety guide Thank you for choosing this GOLDAIR Stick Blender. This GOLDAIR appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference. ALWAYS Always ensure hands are dry before handling the plug or the Stick Blender. Always operate the Stick Blender in the middle of a secure, dry, level surface. Always switch off and allow the Stick Blender to cool before cleaning, storing and before removing and/or cleaning its components. Always disconnect the blender from the supply if it is left unattended and before assembling, disassembling or cleaning. Carry out regular checks of the supply cord to ensure no damage is evident. Return the Stick Blender after a malfunction, or if it has been damaged in any manner, to an authorised electrical service technician for examination, repair or adjustment as special purpose tools are required. Children should be supervised to ensure that they do not play with the appliance. Before washing blender rod, remove it from the Stick Blender. Always ensure that the cord is fully extended (not coiled) while in use. Avoid contact with the moving parts. Keep hands, hair, clothing, as well as spatulas and other utensils away from blade of the blender during operation to reduce the risk of injury to person and/or damage to the Stick Blender. Take special care when preparing food for babies, the elderly and infirm. Always ensure that the Stick Blender shaft is thoroughly sterilized. Use a sterilizing solution in accordance with the sterilizing solution manufacturer s instructions. TECHNICAL SPECIFICATION Model No: FSB390 Power Supply: V, 50Hz Power: 500W NEVER Due to the risk of injury, never use this appliance for any purpose other than its intended use. This appliance is intended for use in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses, by clients in hotels, motels and other residential type environments, bed and breakfast type environments Never use this appliance outdoors. Never blend hot oil or fat. Never operate the appliance with a damaged cord or plug, after it malfunctions, or if it has been damaged in any manner. Have the appliance checked and repaired by a qualified electrician if repair is necessary. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Never allow the power cord to overhang the edge of a table or bench top or to touch any hot surface. The use of an extension cord, power board, or external timer is not recommended with this unit. Due to the risk of injury, the use of third party accessories is not recommended by the manufacturer. Never touch blades while the machine is plugged in. Never leave the appliance unattended when in use. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they are supervised or have been given instruction concerning the use of the Stick Blender by a person responsible for their safety. CONTINUED OVERLEAF

3 General care and safety guide, continued NEVER Never place this appliance on or near a hot gas or electric burner or where it could touch a heated oven or microwave oven. Do not place in a hot oven. Never expose to direct sunlight, high temperatures, humidity, dust or corrosive substances Never immerse the Stick Blender s power housing, the cord set or plug in water or any other liquid to protect against electrical hazards. Never place the Stick Blender in a dishwasher. The cord must not be twisted or wound around the appliance. Do not remove plug from power socket by pulling cord; always grip plug. Never use metal scouring pads for cleaning. Small metal pieces can come loose and cause short-circuiting of electrical components, which can cause electric shock or damage the appliance. Never use harsh, abrasive or caustic cleaners to clean this appliance. Before first use Before first use Carefully unpack the Stick Blender and remove all packaging material, including blade covers. Clean the various Stick Blender accessories in warm soapy water. Rinse and dry thoroughly before use. Cleaning To avoid risk of electric shock, before cleaning, you MUST ALWAYS switch off and unplug the cord from the electrical outlet. Wash blending rod in hot soapy water. Rinse well and dry. Be very careful with the sharp blades. Wipe Stick Blender body with a damp cloth and dry well. Some foods e.g. carrot may discolour the plastic; wiping with a cloth dipped in vegetable oil helps remove discolouring.

4 Components 1. Fast Speed 2. Low Speed 3. Motor Unit 4. Blender Stick Beaker 6. Food processor unit 7. Food processor S blade - note + shape at top of axle. Mini chopper S blade does not have the + at top of axle 8. Mini chopper unit 9. Whisk

5 Operating your Stick Blender & Whisk FOR SAUCE PAN BLENDING: 1. Make sure that the food you are blending is of sufficiently low temperature to avoid burning/scalding in case of skin contact, and to avoid your hand blender overheating. 2. Fit the power handle inside the blender shaft, turn and lock. 3. Plug in and switch on power at mains socket. 4. To avoid splashing, place the blades into the food before switching on. 5. Press the fast speed or low speed button until finished blending. 6. Don t let the liquid get above the join between the power handle and blender shaft. 7. Move the blade through the food and use a stabbing action. 8. Wait until the blade has come to a complete stop before removing the appliance from the food. 9. If your blender gets blocked, unplug before cleaning. 10. After use, unplug, dismantle and clean according to directions. CAUTION: Do not operate the Stick Blender continuously for too long. With heavy mixtures, don t use your Stick Blender for more than 50 seconds in any four minute period as it will overheat. NEVER immerse the motor housing in water. Be sure the unit is turned off and cord is unplugged from electrical outlet before removing the attachments from housing. Always add liquid when blending vegetables or fruit. DO NOT use for blending very hard and/or dry foods or for crushing ice. FOR WHISK: 1. Whisk is suitable for light ingredients such as egg whites, cream, instant desserts and for whisking eggs and sugar for baking. 2. Whisk is not suitable for creaming butter or margarine and sugar. 3. DO NOT whisk more than 4 egg whites or 400ml cream. 4. Push wire whisk into whisk collar. 5. Fit power handle into whisk collar, turn and lock 6. Place food into a bowl. 7. Plug in. To avoid splashing, start on Speed 1 Move whisk clockwise. 8. DO NOT allow liquid to rise above whisk wires. 9. After use, switch off, unplug and dismantle. Clean according to directions.

6 Operating Food Processor & Mini Chopper FOOD PROCESSOR UNIT 1. Place large S blade (with + shape at top of plastic axle) or slicing/grating attachment onto axle in food processor unit. Ensure it is properly locked in place. If using the slicing/grating blade note that the longer part of the plastic axle faces down so that the metal blades face up to process food. 2. Place food to be processed into food processor unit bowl. 3. Place food processor unit lid onto the bowl and ensure it is properly locked in place. Alternatively feed food through feeder chute in lid. 4. Place sticker blender power handle (without rod attached) into the fitting in the lid of the food processor unit bowl lid and ensure it is properly locked in place. 5. Plug in stick blender motor unit and turn on at power point. Use speed control on stick blender motor unit to operate stick blender and process food. MINI CHOPPER UNIT 1. Place small S blade onto axle in food processor unit. 2. Place food to be processed into food processor unit bowl. 3. Place mini chopper unit lid onto the bowl and ensure it is properly locked in place. 4. Place sticker blender power handle (without rod attached) into the fitting in the lid of the food processor unit bowl lid and ensure it is properly locked in place. 5. Plug in stick blender motor unit and turn on at power point. Use speed control on stick blender motor unit to operate stick blender and process food.

7 Operating your Stick Blender Set FOR CHOPPER UNITS: 1. Do not touch the sharp blades. 2. Remove chopper blade before emptying bowl. 3. Do not remove the cover until blade has completely stopped moving. 4. Use chopper unit for chopping foods such as meat, cheese, vegetables, herbs, bread, biscuits, nuts. 5. DO NOT use chopper for hard items such as ice, coffee beans, spices, chocolate as this may damage the blade. 6. DO NOT place hot ingredients into the plastic food processor, chopper or beaker. Maximum 30 C. 7. Remove bones from meat before chopping. 8. Chop any food into 1-2cm cubes. 9. Fit chopper blade over pin in chopper bowl. 10. Add food. 11. Fit chopper cover, turn and lock. 12. Fit stick blender handle into lid, turn and lock. 13. Plug in, hold bowl steady then press Speed After use, unplug and dismantle. Clean according to directions. PROCESSING GUIDE: MAXIMUM AMOUNT APPROX TIME (SECS) Recommended Speed MEAT 600g Faster HERBS 30g 20 Faster WALNUTS 400g 25 Faster HAZELNUTS 400g 30 Faster ALMONDS 400g 20 Lower CHEESE 400g 10 Faster BREAD 200g 50 Faster GARLIC 30g 20 Lower CARROTS 400g 15 Faster CHOCOLATE 350g 50 Faster SUPPORT AND TECHNICAL ADVICE PO Box , NSMC, Auckland Monday Friday 8am-5pm Phone: Website:

8 Two year warranty Your Goldair product has been inspected and tested and is guaranteed subject to the following for a period to two years from the date of purchase against defects in workmanship and materials. During this period, such defects will be rectified by repair or replacement of the product purchased. Your product contains no user serviceable components and this warranty becomes invalid if in our opinion the product has been misused, abused, incorrectly installed, tampered with, connected to an electrical supply not corresponding with the name plate specification, or subjected to power surges. The warranty does not include any labour or other associated expense that may be involved in removal or installation of the product. Normal wear and tear is expressly excluded. If your Goldair product fails to operate satisfactorily, please return it to the retailer from whom it was purchased. To obtain a repair or replacement product under this warranty, you will need to produce satisfactory evidence of date of purchase. The completed warranty and purchase receipt must be presented with the product. The warranty should be filled out at the time of purchase. It is in your interest to make sure this is done. If the product is to be replaced (cannot be repaired) then that replacement will be of the same or similar product or accessory excluding packaging, instruction card etc. Where a replacement product is supplied, this shall be guaranteed for the balance of the original warranty period. Any model that is no longer available will be replaced by a model of a value and with such features as we consider appropriate in the circumstances. Goldair Ltd is not responsible for freight forwarding charges, losses or damage in transit. If service is required after the warranty period has expired, the product should be returned to a qualified electrical technician. Service outside of the warranty period will be at your cost. Consumers Guarantee Act (1993). In accordance with the above act consumers are advised that: The manufacturer does not undertake that repair facilities and parts are necessarily available for this product. If any of the provisions of the foregoing are contrary to any relevant legislation, then that provision shall be deemed to be excluded from the warranty and the rest of the provisions will continue to apply. IMPORTANT: Please retain this warranty card Name Address Purchased from Date of purchase. Name of product Suburb Model no