TOILET BOWLS AND TANKS

DUKE UNIVERSITY CONSTRUCTION STANDARDS

1 22 40 00 Plumbing Fixtures 1. General A. Definitions 1. Section includes a. Water closets and urinals b. Lavatories, sinks, and service sinks c. Electric water coolers, drinking fountains, d. Showers

TUBS & SURROUNDS FIBERGLASS TUB STANDARD FIBERGLASS GARDEN TUB

TUBS & SURROUNDS FIBERGLASS TUB STANDARD One-piece design for a clean, simple design; left, right, or center drain. 309525 54 x 28 Center White 309530 54 x 28 Center Bone 309535 54 x 28 LH Bone 309540

DESIGN STANDARDS SECTION PLUMBING FIXTURES AND EQUIPMENT. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.

PART 1 - GENERAL 1.1 Toilet rooms and utility rooms to have floor drains at lowest point. 1.2 Utilize Exposed Flushometers. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.

LAV FCO WCO NOTES: CONTRACTOR SHALL REFER TO ARCHITECTURAL DRAWINGS FOR MOUNT HEIGHTS AND SPECIAL MOUNTING INSTRUCTION AND LIMITATIONS.

ELECTRIC WATER HEATER SCHEDULE DESIGNATION MODEL MANUFACTURER STORAGE RECOVERY TEMPERATURE LEAVING ELECTRICAL CHARACTERISTICS REMARKS/SPECIAL INSTRUCTIONS NUMBER GALLONS RATE RISE WATER K.W. VOLTAGE PHASE

8 Kitchen Gooseneck. 4 Lavatory/Shower. 8 Shower. Adjustable Garden Tub. Diverter Spring & Spool Diverter Knob Plastic Aerator Speedy Locknut

8 Kitchen 8 Kitchen Gooseneck 4 Kitchen 10979 Chrome 10991 Chrome 10991W White 10987 Chrome 4 Lavatory 4 Lavatory/Shower 8 Tub/Shower 10983 Chrome 10983W White 10988 Chrome 10981 Chrome 4 Tub/Shower 8

HWC NOTES: CONTRACTOR SHALL REFER TO ARCHITECTURAL DRAWINGS FOR MOUNT HEIGHTS AND SPECIAL MOUNTING INSTRUCTION AND LIMITATIONS.

ELECTRIC WATER HEATER SCHEDULE DESIGNATION MODEL MANUFACTURER STORAGE RECOVERY TEMPERATURE LEAVING ELECTRICAL CHARACTERISTICS REMARKS/SPECIAL INSTRUCTIONS NUMBER GALLONS RATE RISE WATER K.W. VOLTAGE PHASE

University of Rochester October 17, 2008 Brooks Landing Business Center

SECTION 224200 COMMERCIAL PLUMBING FIXTURES PART 1 - GENERAL 1.1 WORK INCLUDED A. Provide all labor, materials, equipment and services to perform operations required for the complete installation and related

GENERAL PLUMBING REQUIREMENTS

22 00 00 GENERAL PLUMBING REQUIRMENTS i. 00 00 07 Design Professional Design Process Requirements ii. 00 00 08 Design Professional Documentation Requirements and Deliverables iii. 01 81 00 Facility Performance

DESIGN STANDARDS SECTION Toilet rooms and utility rooms to have floor drains at lowest point.

PART 1 - GENERAL 1.01 Toilet rooms and utility rooms to have floor drains at lowest point. 1.02 Utilize Exposed Flushometers. 1.03 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.

2015 Ferguson Enterprises, Inc. Effective Date: February 1, 2015 PL MIR-PRICE

US PRICE BOOK 2015 Ferguson Enterprises, Inc. Effective Date: February 1, 2015 PL MIR-PRICE 0215 24137 These prices supersede previous price lists and are subject to change without notice. WHAT'S NEW PENDLETON

Sunset Point Building 2 BRUSHED NICKEL TRADITIONAL UPGRADE PACKAGE. Christine Mullineaux th St. North Pinellas Park, FL

Sunset Point Building 2 BRUSHED NICKEL TRADITIONAL UPGRADE PACKAGE Christine Mullineaux 6600 49th St. North Pinellas Park, FL 33781 727-521-2691 TABLE OF CONTENTS Master Bath-whitebn 3 Guest Bath 1 6 Guest

A. All fixtures shall meet the requirements of ANSI A117.1, ANSI Z124.2 and the State of Texas Accessibility Standards (TAS).

PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

Title: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Plumbing Standards

Date Description of Change Pages / Sections Modified ID 8/5/17 Entire document - mgl PART 1 - INTRODUCTION 1.1 This section applies to Plumbing for campus institutional facilities. A. Purpose: Yale University

GENERAL PLUMBING REQUIREMENTS

22 00 00 GENERAL PLUMBING REQUIRMENTS 1. GENERAL A. Related sections: i. 00 00 07 Design Professional Design Process Requirements ii. 00 00 08 Design Professional Documentation Requirements and Deliverables

PARTS STOCKED REPLACEMENT FAUCET BIBB SCREWS... SCREW ASSORTMENT MISC. 3 /8" BIBB LOC SCREW 1 /2" BIBB SCREW 1 /2" BIBB LOC SCREW 3 /8" BIBB SCREW

January 1, 2001 STOCKED REPLACEMENT FAUCET BIBB SCREWS... Parts-5L 3 /8" BIBB SCREW 6-32 GAUGE CHROME 35138- No. 1 3 /8" BIBB SCREW 10-24 GAUGE CHROME 35153- No. 16 3 /8" BIBB SCREW 8-32 GAUGE CHROME 35141-

2). Crane Co. 4). Kohler Co. 5). Universal-Rundle Corp. Revised September 29, 2017 Commercial Plumbing Fixtures

PART 1: GENERAL A. This Section provides design standards for plumbing fixtures and trim. Certification of compliance with specified ANSI, UL, and ASHRAE Standards will be required, as appropriate, for

Sunset Point Building 2 BRUSHED NICKEL UPGRADE CONTEMPORARY PACKAGE. Christine Mullineaux th St. North Pinellas Park, FL

Sunset Point Building 2 BRUSHED NICKEL UPGRADE CONTEMPORARY PACKAGE Christine Mullineaux 6600 49th St. North Pinellas Park, FL 33781 727-521-2691 TABLE OF CONTENTS Master Bath 3 Guest Bath 1 6 Guest Bath

LOT # DESCRIPTION QTY

Peak Auctioneering -- Building Material Auction Specialists 1628 W. Ninth St., P.O. Box 014141 Kansas City, MO 64101 Office (816)474-1982; Fax (816)474-4405 www.peakauction.com LOT # DESCRIPTION QTY 5001

A. Section Joint Sealants: Seal fixtures to walls and floors.

SECTION 224000 - PLUMBING FIXTURES PART 1 GENERAL 1.1 SECTION INCLUDES A. Water closets. B. Urinals. C. Lavatories. D. Sinks. E. Service sinks. F. Showers. G. Wash fountains. H. Eye wash fountains. 1.2

Prices are not to show any tax. H.S.T. is to be shown separate on your invoices. All items are to be priced F.O.B. Halifax.

METROPOLITAN REGIONAL HOUSING AUTHORITY RFQ: 17-207 Supply of Miscellaneous Plumbing Materials Telephone 902.420.2108 Please quote on the following items and estimated quantities we may be requiring for

TRUMAN STATE UNIVERSITY PRESIDENT S RESIDENCE RENOVATION

SECTION 224100 - RESIDENTIAL PLUMBING FIXTURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01

DESIGN STANDARDS SECTION Toilet rooms and utility rooms to have floor drains at lowest point.

PART 1 - GENERAL 1.01 Toilet rooms and utility rooms to have floor drains at lowest point. 1.02 Utilize Exposed Flushometers. 1.03 Utilize wall hung toilet room fixtures. Urinals for handicapped may be

Bagnotec Countertop without Tap Hole with Cut-out for One 500 mm Basin BDS-MLI A 810 x 490 x 12 mm (One BDF-MLI-800- Required)

For flexibility of design, BAGNODESIGN have introduced multiple new finishes to the M-line brassware range which can now be specified in a choice of chrome, brushed nickel, matt black, matt white and brushed

PLUMBING FIXTURES CHAPTER 27

CHAPTER 27 PLUMBING FIXTURES SECTION P2701 FIXTURES, FAUCETS AND FIXTURE FITTINGS P2701.1 Quality of fixtures. Plumbing fixtures, faucets and fixture fittings shall be constructed of approved materials,

400 Standard Appliance Package

400 Standard Appliance Package DISHWASHER 24 Dishwasher with ProWash cycle, MICROWAVE 30 2.0 Cu.Ft. Microwave with 7 sensor functions. Sensor steam / Simmer cook cycle. OPTIONAL: 30 GAS RANGE FRONT-CONTROL

Non-Stock Expedited Orders Expediting is subject to availability at a 10% upcharge plus $25 for UPS.

Non-Stock Lead Times Normal Lead time on Delta is 2 weeks Non-Stock Expedited Orders Expediting is subject to availability at a 10% upcharge plus $25 for UPS. Warranty Delta faucets have a lifetime finish

KCKHA PRICE LIST 2015

DOORS & ACCESSORIES Issue Unit Fixed Cost BI-FOLD DOOR Each $30.00 DEAD BOLT LOCK Each $9.00 DOOR CASING - COLONIAL 14' FT $0.50 DOOR HINGE - STEEL DOOR 4-1/2" Each $20.00 DOOR HINGE 3-1/2" Each $2.00

SECTION PLUMBING

SECTION 22 10 00 PLUMBING PART 1 GENERAL 1.1 WORK INCLUDED A. Furnish all labor, material and equipment necessary for the complete installation of the sanitary sewer system (including soil and vent piping),

Minor Home Repairs. November 4, County of Henrico Department of Community Revitalization

Minor Home Repairs 1 November 4, 2017 County of Henrico Department of Community Revitalization Educate homeowners on basic technical skills that will help the homeowner understand daily operations of different

DESIGN GUIDELINES AND TECHNICAL STANDARDS

DESIGN GUIDELINES AND TECHNICAL STANDARDS Date of Issuance: January 1, 2014 DIVISION 22 PLUMBING SECTION 22 1118 DOMESTIC WATER DISTRIBUTION SYSTEM 1. General: This section outlines general requirements

NEW PRODUCTS! 59911_Sayco.indd 1 6/15/11 1:13 PM

NEW PRODUCTS! SUGGESTED LIST PRICE GUIDE 2011 TABLE OF CONTENTS Introduction Faucets Model Numbers and Price Index Accessories / Replacement Parts Model Numbers and Price Index iii v vi KITCHEN FAUCETS

PLUMBING FIXTURES Reserved

CHAPTER 27 PLUMBING FIXTURES Reserved 2003 INTERNATIONAL RESIDENTIAL CODE 395R This page left intentionally blank. 396R 2003 INTERNATIONAL RESIDENTIAL CODE SECTION P2708 SHOWERS P2708.1 General. Shower

B E ROUTE DUCT BEHIND BOOKSHELF. GRILLE MOUNTED ON TOP OF BENCH. BOOK CASE WALL 12x8 8x5 I 8"Ø 7"Ø 125 CFM I D M FLOOR SIDE WALL VENT 6x5 160 CFM 6"Ø 6"Ø 8x10 J C G 1 Section M-1 NOT TO SCALE Project No

Fixtures Installation

Youth Explore Trades Skills Description Students will learn to install a toilet and lavatory basin. Lesson Outcomes The student will be able to: Install a toilet Install a lavatory basin Assumptions The

DESIGN AND CONSTRUCTION STANDARDS July 2011

PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design for new construction and renovations.

SECTION PLUMBING FIXTURES

CSUEB Pioneer Heights Phase r 15410 Page 1 SECTION 15410 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

GENERAL PLUMBING REQUIREMENTS

22 00 00 GENERAL PLUMBING REQUIRMENTS i. 00 00 07 Design Professional Design Process Requirements ii. 00 00 08 Design Professional Documentation Requirements and Deliverables iii. 00 00 13 Designing Learning

B. Shop Drawings: Include diagrams for power, signal, and control wiring.

SECTION224213.13 -COMMERCIAL WATERCLOSETS PART 1- GENERAL 1.1 SUMMARY Section Includes: 1. Water closets. 2. Flushometer valves. 3. Toilet seats. 1.2 ACTION SUBMITTALS Product Data: For each type of product.

The BEST Plumbing Specialties. One Source. F 1 BRAIDED SUPPLIES

The BEST Plumbing Specialties. One Source. F 1 BRAIDED SUPPLIES F BRAIDED SUPPLY - TOILET - Stainless steel #304 braided supply - PVC inner hose (CSA approved) - Plated brass nuts - 100% pressure tested

WORK DESCRIPTION HOUSING REHABILITATION PROGRAM HOUSING DEVELOPMENT DIVISION CITY OF COLORADO SPRINGS

WORK DESCRIPTION HOUSING REHABILITATION PROGRAM HOUSING DEVELOPMENT DIVISION CITY OF COLORADO SPRINGS NAME: Ann Parker DATE: 2/25/14 ADDRESS: 777 Saturn Dr. PHONE: 719-636-1477 I have received and reviewed

Plumbing. September 8, 2018 Prices and product availability are subject to change without notice. 32" Curved Shower Pan with Round Front - Parchment

Page 1 of 19 Plumbing 32" Shower Surround with Wainscot Design - 32" Curved Shower Pan with Round Front - $128.00 (df-323244891) Dual Lever Pull Out Spout Kitchen Faucet - Venetian Bronze $108.74 (725110-VB)

MATERIALS Traps TRAPS. No. IPC IRC Description

MATERIALS Traps TRAPS MAX " MAX 0" No. IPC IRC Description 00. P0.6 00. P0.6 00. P0. 00. () P0.6 Exc. Vertical distance from fixture to the trap weir can not exceed ". Horizontal distance from the fixture

EXPLODED VIEW & PARTS LIST

EXPLODED VIEW & PARTS LIST CABINET COMPONENTS - IN-LINE BREWERS CABINET COMPONENTS - IN-LINE BREWERS 22 Cabinet Components for Models: 1012, 1040 1 2D-70090 Warmer Plate Black, 1/4-28 Stud 1012, 1040 Units

Moen Posi Temp Cartridge Cleaning Instructions Pdf

Moen Posi Temp Cartridge Cleaning Instructions Pdf Download Specs (PDF) water usage: 2.0 gpm (7.6 L/min) max. cartridge type: 1222, valve meets ASSE performance requirements: Posi-Temp Shower CPVC to CPVC

Sign Planogram: Plumbing Repair Bay Name: Plumbing Repair 4.1. Toilet Repair. 72" from floor to bottom of AV. Replacing a Fill Valve

70054 Toilet Repair 700539 70054 Bay Name: Plumbing Repair 4.1 1 of 1 1 Toilet Repair 72" from floor to bottom of AV 2 3 4 5 6 7 2 Installing a Toilet Ensure that Install a new Place the toilet Tighten

SECTION PLUMBING FIXTURES AND TRIM. A. Types of plumbing fixtures required for the project include the following:

SECTION 15440 PART I - GENERAL 1.01 WORK INCLUDED A. Types of plumbing fixtures required for the project include the following: 1. Water Closets 2. Urinals 3. Lavatories 4. Mop Sink 5. Sinks 6. Electric

Union County Vocational - Technical Schools Scotch Plains, New Jersey

SECTION 22 40 00 - PLUMBING FIXTURES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Faucets for lavatories, bathtubs, bathtub/showers, showers and sinks. 2. Flushometers. 3. Toilet

Fresh, contemporary styling are the keynotes of this range from BAGNODESIGN, allowing it to sit harmoniously in any modern bathroom setting.

METREAUX Fresh, contemporary styling are the keynotes of this range from BAGNODESIGN, allowing it to sit harmoniously in any modern bathroom setting. With a choice of basin, bath and shower mixers, Metreaux

MECHANICAL A&T PROJECT DEVELOPMENTS INC.

MECHANICAL A&T PROJECT DEVELOPMENTS INC. 226 Kodiak Mechanical Ltd Warranty Package The fallowing information will explain the plumbing components, maintenance schedule and warranty coverage for the plumbing

Non-Stock Lead Times Normal Lead time on Delta is 2 weeks Non-Stock Expedited Orders Expediting is subject to availability at a 10% up-charge.

Non-Stock Lead Times Normal Lead time on Delta is 2 weeks Non-Stock Expedited Orders Expediting is subject to availability at a 10% up-charge. Warranty Faucets with factory defects such as Poor Finish

SONOMA FORGE RETAIL PRICE LIST

SONOMA FORGE RETAIL PRICE LIST Effective May 1, 2017 (Subject to Change without Notice) Revised January 1, 2018 www.sonomaforge.com info@sonomaforge.com 800-330-5553 TABLE OF CONTENTS PAGE WATERBRIDGE

Original Collection by Barbara Barry DISCOVER

Collection by Barbara Barry DISCOVER Collection Designer Barbara Barry The Barbara Barry Collection celebrates the intimate rituals of the bath and dressing room. Beautifully balanced and impeccably crafted,

$0.98 $ KITCHEN SINK STRAINER, 3-1/2" x BATH TUB DRAIN, 1-15/16" x 2-3/4" x $ $1.89

*s are Subject to Change without Notice.* WASHERS Rubber Beveled 5-1915 CLOSET, 3/8" O.D. TUBE $0.20 5-1916 CLOSET, 1/2" O.D. TUBE $0.20 5-1917 LAVATORY, 1/2" TALL x 3/8" O.D. $0.20 TUBE 5-1849 LAVATORY,

Welcome! Today s topic: Small Home Repairs. November 14, 2015

Welcome! Today s topic: Small Home Repairs November 14, 2015 Small Home Repairs Course Presented by Monique Johnson Environmental Green Solutions, LLC Objective Educate homeowners on basic technical skills

Mechanical/Plumbing Specification

Mechanical/Plumbing Specification Contents WC-1 Toilet 3 WC-1 Fixtures - Toilet Seat & Toilet Supply 4 UR-1 Urinal 5 UR-1 Fixtures - Metering Valve & Vacuum Breaker 7 - Wall Cleanout & Urinal Carrier 9

PLUMBING DESIGN GUIDELINES SECTION DESIGN GUIDELINES DUVAL COUNTY PUBLIC SCHOOLS

The Design Guidelines, which follow, are intended to supplement the Educational Specifications and State Requirements for Educational Facilities (SREF). Note: All fittings shall be installed by no less

For Town Collection by Michael S Smith DISCOVER

Collection by Michael S Smith DISCOVER Collection Designer Michael S Smith In designing my collection for KALLISTA, I wanted to create something that was timeless and classic. Each element, from the faucets

corsair Discover more at 2 Wall Mounted Wash Basin with Overflow 611 x 486 x 175 mm

CORSAIR Wall Mounted Wash Basin with Overflow 611 x 486 x 175 mm Wall Mounted Wash Basin with Overflow 811 x 486 x 180 mm Wall Mounted Wash Basin with Overflow 1011 x 486 x 180 mm One Tap Hole Code: BDS-COR-112211-A-WH

(714) Irvine Pipe & Supply, Inc.

MOEN KITCHEN FAUCETS 4 LAV FAUCETS MOEN 4 LAV FAUCETS HEAVY DUTY STANDARD HANDLES #8210 BASIC (3 HOLE) #7425 NO POP-UP #L4601 WITH POP-UP #L4621 HEAVY DUTY BLADE HANDLES #8215 1 HOLE #7423 HEAVY DUTY CAST

FAUCET REPAIR RV PARTS & ACCESSORIES RV PARTS & ACCESSORIES FAUCET STEMS FAUCET ESCUTCHEONS

FAUCET REPAIR BAG NO. FAUCET STEMS RV1 Phoenix/Streamway Brass stem 6 RV2 Phoenix/Streamway Brass stem 6 RV10 Phoenix/Streamway Plastic stem 6 Hot or cold Old style 1 pair RV12 Phoenix/Streamway Plastic

2016 CASH ACME CATALOG

2016 CASH ACME CATALOG WATER CONTROL VALVES THAT STAND THE TEST OF TIME In 1893, A.W. Cash designed a valve for U.S. Navy submarines. With the bottom of the sea as his testing ground, the valve became

RHEEM WATER HEATER PARTS GUIDE

RHEEM WATER HEATER PARTS GUIDE 2011 Parts & Accessories for water heating systems Preferred Parts The premium line approved for replacement in Rheem and Ruud residential water heaters Rheem -Ruud commercial

FEBRUARY 2O19 SPECIALS UNBELIEVABLE QUALITY! FANTASTIC PRICE!!! TRY ONE

FEBRUARY 2O19 SPECIALS WHAT YOU WANT WHEN YOU WANT IT UNBELIEVABLE QUALITY! FANTASTIC PRICE!!! TRY ONE PEX COMBO CRIMP TOOLS Features interactive jaws for 360 crimping. Conforms to ASTM F1807 specifications,

WALL MOUNTED SHOWER SYSTEMS

WALL MOUNTED SHOWER SYSTEMS Wall mounted shower systems for schools, institutions, clubs, industrial and shipboard applications. Thermostatic, pressure balanced, or single temperature models Single or

PRODUCTS THAT CONSERVE, REPAIR AND SAVE!

please specify sale sale code code when when ordering PBW92 PBW93 valid valid thru thru 5//5 3// - 5/30/5-3/3/ TAP INTO SAVINGS! PRODUCTS THAT CONSERVE, REPAIR AND SAVE! DON'T FORGET... EPA s Fix a Leak

Combining strong geometric lines with some of the hottest colour trends for the bathroom,

MEZZANINE Combining strong geometric lines with some of the hottest colour trends for the bathroom, BAGNODESIGN introduces the Mezzanine collection. The Mezzanine washbasin manufactured from the highest

HIGH QUALITY PRICED RIGHT! Product Guide 2/19

HIGH QUALITY PRICED RIGHT! Product Guide 2019 2/19 CONTENTS Faucets Kitchen............... 3 Lavatory............. 3-4 Laundry.............. 4 Trim Kits.............. 4 Sinks Kitchen............... 5 Bar................

PERFORMANCE TECHNICAL SPECIFICATION *************************************************************************** SECTION D20 PLUMBING 02/18

NAVFAC PTS-D20 (February 2018) ------------------------------ Preparing Activity: NAVFAC SUPERSEDING PTS-D20 (September 2016) PERFORMANCE TECHNICAL SPECIFICATION SECTION D20 PLUMBING 02/18 NOTE: This section

Selection Guide.

Selection Guide www.zurn.com SELECTION GUIDE Table of Contents Commercial Brass... 2-3 AquaSpec... 4-5 Tubular Brass... 6 Zurn Fixtures... 7 Introduction... 8 Understanding a Zurn One System Number...

SUBCOURSE EDITION EN US ARMY ENGINEER SCHOOL PLUMBING FIXTURES (PLUMBING IV)

SUBCOURSE EDITION EN5113 5 US ARMY ENGINEER SCHOOL PLUMBING FIXTURES (PLUMBING IV) US ARMY PLUMBER MOS 51K SKILL LEVELS 1 AND 2 COURSE PLUMBING FIXTURES (PLUMBING IV) SUBCOURSE NO. EN5113 US Army Engineer

We have our range of Bath fittings which completes the lifestyle offering to millions of customers across India. The Elegance quality and style in

Price Guide 2017 10 YEARS WARRANTY We have our range of Bath fittings which completes the lifestyle offering to millions of customers across India. The Elegance quality and style in fauctes, is aligned

TERRACE VIEW APARTMENTS

TERRACE VIEW APARTMENTS HUNT CLUB ROAD BLACKSBURG, VIRGINIA APARTMENT FINISHES AND UPGRADES UNIT TYPE 2 x 1.5 Phase 5-8 Unit Number 11 Units Total 1) 4200C 2) 4200K 3) 4500D 4) 4500G 5) 4500H 6) 5400A

Instructions. Certifications Brass w/built-in Stop Valve. Pressure Balance Shower Valve. Tools Required. Important Points.

Instructions Tools Required Adjustable Wrench Groove Joint Pliers Pipe Wrench Phillips Screwdriver Pipe Tape or Pipe Thread Compound Safety Tips If you solder the joints during installation, the seats,

Shower Heads EDO COLLECTION

Shower Heads Several handle styles for custom faucet creation along with split finish options create an unlimited amount of design solutions. Each faucet is of solid brass construction. Santec s True-Mount

Wholesalers List Price Book. Effective Date: February 5, Fixtures WEP OLP. Faucets & Sinks. Manual Products WLP. Genuine MicroPlumb.

Fixtures WEP Sensor-Activated Optima Systems OLP Faucets & Sinks OLP Manual Products WLP Manual Repair Parts & Kits CLP 2017 Electronic Repair Parts & Kits ELP Headquarters 10500 Seymour Avenue Franklin

Wood Manor. Developer. 24/28/32 Series. Developer. Your Local Wood Manor Dealer is: Some Items Shown May Be Optional

24/28/32 Series Some Items Shown May Be Optional Your Local Wood Manor Dealer is: 24 Series 2 24 Series 3 28 Series 4 28 Series 5 28 Series 6 28 Series 7 28 Series 8 28 Series 9 28 Series 10 28 Series

TERRACE VIEW APARTMENTS

TERRACE VIEW APARTMENTS HUNT CLUB ROAD BLACKSBURG, VIRGINIA APARTMENT FINISHES AND UPGRADES UNIT TYPE 3A x 1.5 Phase 5-8 Unit Number 4 Units Total 1) 6600F 2) 6800K 3) 7600G 4) 7900H SCOPE OF WORK A-108-E

WIDESPREAD KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE

WIDESPREAD KEEP THIS INSTRUCTION BOOKLET FOR FUTURE REFERENCE Parts Breakdown 1 2 13 3 10 4 5 11 8 6 14 9 12 7 # PART DESCRIPTION PART # 1 Complete Spout Assembly * PS - 2 00-U** 2 Complete Handle Assembly

TERRACE VIEW APARTMENTS

TERRACE VIEW APARTMENTS HUNT CLUB ROAD BLACKSBURG, VIRGINIA APARTMENT FINISHES AND UPGRADES UNIT TYPE 4 x 2.5 Phase 5-8 Unit Number 1 Unit Total 1) 7400B SCOPE OF WORK A-112-C 4 Bedroom 2 Bath 2 Half

A. General: comply with appropriate standards. 1. International Association of Plumbing and Mechanical Officials: IAPMO. 2. California State AB 1953.

SECTION 22 40 00 - PLUMBING FIXTURES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Water closets. 2. Urinals. 3. Lavatories. 4. Sinks. 5. Service sinks. 6. Electric water coolers. 7. Wash fountains.

B. Shop Drawings: Include diagrams for power, signal, and control wiring.

SECTION 224213.13 - COMMERCIAL WATER CLOSETS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

Safe at Home. Suggestions for Homeowner Created in partnership with the Administration on Aging. Assessor: Assessor: Homeowner Name: Address:

Assessor: Assessor: 1. EXTERIOR ENTRANCES AND EXITS Do you any difficulty getting in and out of your home? Which entrance(s) do you use the most? Have you had any falls or safety concerns? I want you to

TERRACE VIEW APARTMENTS

TERRACE VIEW APARTMENTS HUNT CLUB ROAD BLACKSBURG, VIRGINIA APARTMENT FINISHES AND UPGRADES UNIT TYPE 2A x 1 Phase 5-8 Unit Number 13 Units Total 1) 4400C 2) 4400G 3) 4400K 4) 4900C 5) 5000C 6) 5100K 7)

JAMES P. KISSANE, ARCHITECT

UNISEX RESTROOM 6" X 9" UNISEX H.C. RESTROOM SIGN; BLUE NOTE: THE FASTENING HARDWARE FOR THE WALL BRACKETS FOR THE AND THE URINAL AND GRAB BARS MUST BE ABLE TO SUPPORT A 300 LB. WEIGHT. CONTRACTOR IS REQUIRED

Builders Package: Bronze

Builders Package: Bronze Tradelink 2018 BATH TUB RECLINE II RECTANGLE BATH 1510MM- 134171 The Recline Bath is a compact, everyman's bath that promises value for money. Available in two ready-to-fit sizes,

Wholesalers List Price Book. Effective Date: February 1, Fixtures WEP. Manual Products WLP HEALTHMINDER. Products HM. Genuine MicroPlumb

Fixtures WEP Sensor-Activated Optima Systems OLP Manual Products WLP Manual Repair Parts & Kits CLP Electronic Repair Parts & Kits ELP 2015 HEALTHMINDER Products HM Headquarters 10500 Seymour Avenue Franklin

Nims Village New Home Features

These included features have been carefully chosen to complement the unique environment of Nims Village with all the quality and style you ve come to expect from Evans Coghill Homes Nims Village New Home

SERVICE PROCEDURES. SERVICE TYPE: JPMC Winterization ACCESS: See Order Instructions for Lockbox Code SCHEDULING PROCEDURES: ON-SITE PROCEDURES:

SERVICE PROCEDURES SERVICE TYPE: JPMC Winterization ACCESS: See Order Instructions for Lockbox Code SCHEDULING PROCEDURES: Contact NVMS immediately if you cannot complete and report this order by the due

Willoughby Industries - Security Products

TOILET WASTE LOCATION (ETW)- WALL OUTLET, BLOWOUT (ETF)- FLOOR OUTLET, SIPHON JET (ETWS)- WALL OUTLET, SIPHON JET FIXTURE MOUNTING (FM)- FLOOR MOUNTED (OF)- OFF FLOOR MOUNTED (OW)- OFF WALL MOUNTED INLET

Wholesalers List Price Book. Effective Date: March 4, Fixtures WEP. Faucets, Soap Dispensers. Manual Products WLP. Parts PWT. Genuine MicroPlumb

Fixtures WEP Sensor-Activated Optima Systems OLP Faucets, Soap Dispensers & Sinks OLP Manual Products WLP Manual Repair Parts & Kits CLP Electronic Repair Parts & Kits ELP Headquarters 10500 Seymour Avenue

McLean Overlake New Home Features

These included features have been carefully chosen to complement the unique environment of McLean with all the quality and style you ve come to expect from Evans Coghill Homes McLean Overlake New Home

McLean Overlake New Home Features

These included features have been carefully chosen to complement the unique environment of McLean with all the quality and style you ve come to expect from Evans Coghill Homes McLean Overlake New Home

TAPS, SHOWER HEADS, BATHROOM ACCESSORIES, SINKS AND LAUNDRY TUBS

TAPS, SHOWER HEADS, BATHROOM ACCESSORIES, SINKS AND LAUNDRY TUBS SourceCorp Australia specialises in the manufacturing, procurement and supply of construction-based products direct from China. Success

Town Square S Collection

Town Square S Collection We ve Set the Standard Yet Again American Standard is where life happens, improving everyday living in and around your kitchen and bathroom. Our product solutions blend inviting

1. Division 22 Section "Emergency Plumbing Fixtures." 2. Division 22 Section "Drinking Fountains and Water Coolers."

Page 224000-1 SECTION 224000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

Repair Parts List DISHWASHER MODEL NUMBER MDC4000AWX. When requesting service or ordering parts, always provide the following information:

Repair Parts List DISHWASHER MODEL NUMBER MDC4000AWX When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description

Safe at Home. Suggestions for Homeowner Created in partnership with the Administration on Aging. Assessor: Assessor: Homeowner Name: Address:

Assessor: Assessor: Homeowner Name: Address: 1. EXTERIOR ENTRANCES AND EXITS Do you any difficulty getting in and out of your home? Which entrance(s) do you use the most? Have you had any falls or safety

PERFORMANCE TECHNICAL SPECIFICATION *************************************************************************** SECTION D20 PLUMBING 02/18

NAVFAC PTS-D20 (February 2018) ------------------------------ Preparing Activity: NAVFAC SUPERSEDING PTS-D20 (September 2016) PERFORMANCE TECHNICAL SPECIFICATION SECTION D20 PLUMBING 02/18 NOTE: This section

Moen Commercial Products Eco-Performance Product Guide

Moen Commercial Products Eco-Performance Product Guide Learn how the use of MOEN Commercial Products What is LEED? The Leadership in Energy and Environmental Design (LEED) Green Building Rating System

TERRACE VIEW APARTMENTS

TERRACE VIEW APARTMENTS HUNT CLUB ROAD BLACKSBURG, VIRGINIA APARTMENT FINISHES AND UPGRADES UNIT TYPE 4 x 2 Phase 5-8 Unit Number 1 Unit Total 1) 4300G SCOPE OF WORK A-111-B 4 Bedroom 2 Bath RENOVATION