DDL-9000 DIRECT-DRIVE, HIGH-SPEED. 1-NEEDLE. LOCKSTITCH MACHINE WITH AN AUTOMATIC THREAD TRIMMER
|
|
- Horace Davis
- 5 years ago
- Views:
Transcription
1 DDL-9000 DDL-9000D (DRY-HEAD TYPE) DDL-9000S (MINUTE-QUANTITY LUBRICATING TYPE) DIRECT-DRIVE, HIGH-SPEED. 1-NEEDLE. LOCKSTITCH MACHINE WITH AN AUTOMATIC THREAD TRIMMER DDL-9000DS-WB/CP-160D The machine head is one size larger than the conventional head, expanding the space under the machine arm for increased operability. With its direct-drive system, the machine starts up smoothly and offers excellent responsiveness. With its dry head that no longer uses an oil pan, the machine totally eliminates oil stains on the material. (DDL-9000D)
2 This larger machine head may change the machine head standard for the 21st century. DDL-9000D (DRY-HEAD TYPE) DDL-9000S (MINUTE-QUANTITY LUBRICATING TYPE) With its newly developed large machine head, the DDL-9000 dramatically upgrades seam qualityand increases efficiency. Wider space under the arm JUKI has developed a new high-long arm machine head one size larger than the head for the conventional lockstitch machine. With its wider area under the arm, the machine permits easy handling of the sewing material for improved operability. * The space under the arm is approximately 4 cm wider and 1 cm higher than that in JUKI's current lockstitch machine. Easy-to-observe needle entry area The jaw of the machine arm is located 1cm higher than that of the conventional machine. By ensuring easy observation of the needle entry area, the operator can run the machine in a more comfortable posture. Low noise and vibration The machine head frame is designed for optional balance and high rigidity. The use of this frame in conjuction with the machine's direct-drive system dramatically reduces operating noise and vibration. The DDL-9000 incorporates a direct-drive system (DD system) that offers quick start-up, upgraded stop accuracy, excellent responsiveness, and a stronger needle thrust for faster, better penetration into the material. In the machine's newly introduced direct-drive system, a compact AC servomotor is directly connected to the main shaft. This motor demonstrates quick start-up, upgraded stop accuracy, and excellent responsiveness. Since the machine uses no V-belt, the power consumption is reduced and belt chips are eliminated. Designed without an oil pan, the machine offers improved maintainability with easy removal of dust and lint. The dry-head-type machine (D type) operates without lubrication. This means the machine produces no oil splashes during sewing, freeing sewing products from the risk of oil stains. The machine requires neither periodical oiling nor oil level adjustment, saving you time and trouble for maintenance. The minute-quantity lubrication type machine (S type) only feeds clean oil from the oil tank to the hook and needlebar. This selfenclosed system stays clean since it doesn't use any reflux oil. This is very important for smooth operation when running at high sewing speeds (5,000rpm at maximum). DRY-HEAD TYPE (D TYPE) MINUTE-QUANTITY LUBRICATING TYPE (S TYPE) With its newly designed feed mechanism, thread take-up and light-in-weight mechanism, the machine offers both upgraded sewing capabilities and excellent operability. The presser foot mechanism is made of aluminum to reduce the weight. This light-weight presser foot prevents jumping when the machine runs at high speeds and responds quickly when the operator changes the sewing direction for straight portions and curved portions of the material. The machine can be used for wider range of materials and permits easy adjustment of the height, inclination, and timing of the feed dog.
3 The machine has been developed based on thoroughgoing studies on safety, maintainability, reliability, and durability. Safety switch The machine saves you the time and trouble of removing the knee-lifter and cover. This means that the machine head can be tilted for cleaning and maintenance without the inconvenience of removing the knee-lifter and cover. Even if you tilt the machine head while the power is still ON, the safety switch will disable the machine. This means the machine won't start running when the head is tilted even if you press the foot pedal. The handwheel is provided with a special mechanism to prevent the tangling of thread and hair. This is one more effective safeguard in a list of many. Installation of an attachment-mounting seat improves operability when replacing the attachment and increases the durability of the machine bed surface. The machine is provided with a well-proven horizontal-type thread-trimming mechanism that ensures speedy and reliable thread trimming. DRY-HEAD TYPE (D TYPE) The machine is provided with various easy-to-operate functions for increased operability. The machine has a pushbutton-type reverse feed switch. Tension-regulating knob Pressr spring regulator The machine is equipped with a tensionregulating knob and presser spring regulator, both with calibration markings. The machine is equipped as standard with a micro-lifter. The maximum lift of the presser foot is increased to 15mm. The bobbin winder is builtin at the top surface of the machine head. The hinge has been moved 10 cm from behind the needle entry point. 15mm The SC-900 control box offers further upgraded capabilities. SC-900 The number of revolutions at the start-up can be switched between three settings according to the operator's needs(standard, low, and high). The function-setting switch is provided with two new capabilities: reverse-feed and repeat. In addition, the switch has a reset capability to restore the machine to the default settings. The control panel can be selected according to the process. CP-360D With this control panel, two kinds of programs combining as many as 15 steps can be established. This control panel has an expanded range of functions such as teaching sewing, a function used to establish the number of stitches during sewing. CP-160D Four different kinds of pattern sewing are possible: automatic reverse stitching, constantdimension sewing, rectangle-shape sewing, and multi-layer stitching. As many as 19 stitches can be established for automatic reverse stitching (single or double). " Without control panel" can also be specified.
4 THE MACHINE SPECIFICATIONS BEST SUITED TO THE RESPECTIVE APPLICATIONS ARE AVAILABLE. DDL-9000DS DDL-9000SS for light-to medium-weight materials These models are adaptable to a wider range of materials. They can be flexibly used to sew various kinds of materials. These are standard types that can be used for a wider range of applications. DDL-9000SH for heavy-weight materials With its increased thread tension, outstanding feed efficiency, and high-thrust needle, faster, better penetration into materials, the machine runs at the maximum sewing speed of 4,500 rpm. The end result is higher productivity. DDL-9000DF for extra light-weight materials and foundations Best-suited to the sewing of extra light-weight materials and foundations Outstanding operability! The machine easily sews hard-to-sew materials. With its abilities to sew sharp curves and prevent material slippage, the machine performes outstandingly. The machine prevents puckering, irregular stitches, and uneven material feed! Thread tension components: The machine uses a low-tension spring that supports the low-tension sewing capability. A fixed-type thread guide is used to offer a constant, steady feed of the thread. Presser mechanism: The presser spring regulator produces an extra low pressure of 500 g. The light-weight presser foot won't jump even when the pressure foot pressure is low. Specific gauges: The machine is equipped as standard with a throat plate, feed dog, and presser foot specifically designed to prevent puckering.
5 Options (With its full array of options, the machine further increases productivity.) Auto-lifter AK-118 Optional switch Remaining bobbin thread detector AE-8 * Part No.: When you place orders DDL B Machine head type Dry head D Minute-quantity lubrication S PSC box/control panel SC-900- S- D For General Export For CE Specifications Application Max. sewing speed Max. stitch length Needlebar stroke Lift of the presser foot Lubrication Hook Model name Needle ( at the time of delivery) Free space for sewing Size of bed Bobbin thread winder Machine head drive Automatic reverse feed function Power requirement Power consumption Total weight PSC box 3-phase This switch, mounted on the reverse feed switch, enables handy control of various functions*. *It is especially effective when operating the machine while standing. Application For light- to medium-weight materials For heavy-weight materials S H For extra light-weight materials and foundation F When the amount of remaining bobbin thread reaches the setting, the buzzer will sound to warn the operator not to press on the front part of the foot pedal. With this function, the operator doesn't have to look away from the sewing work to check the bobbin thread. (Only supported by the minute - quantity lubricating type machine) Material edge sensor ED-4 * When the sensor detects a material edge, it immediately stops the sewing machine and actuates the thread trimmer. This enhances productivity by allowing the operator to conduct sewing work without running to look out for missing stitches. Micro-lifter (asm.) Part No.: This device can be installed on the back of the face plate. It is very convenient for frequent use. *To mount the optional devices onto the machine after the setup, the optional PWB A Part No.:M A0 (separately available) will be required. For the sewing specification "H," only the minute-quantity lubrication type (S type) machine head is available. For the sewing specification "F," only the dry head type (D type) machine head is available. 220~240V For JUS (LA) PSC box 3-phase (Note) The color of the product shown in photographs in this catalog is slightly different from the actual color of the product. Device and attachment Not provided Auto-lifter (pedal-driven) AK118 Dry head type Minute-quantity lubrication type DDL-9000DS DDL-9000DF DDL-9000SS DDL-9000SH For light- to medium-weight materials For extra light-weight materials and foundation For light- to medium-weight materials For heavy-weight materials 4,000rpm 3,500rpm 5,000rpm 4,500rpm 5 mm 4 mm 5 mm 30.7 mm 35 mm By hand-lifter : 5.5 mm / By knee-lifter : 15 mm(max.) No lubrication Minute-quantity lubrication to needlebar and hook Exclusive no-lubrication hook (plastic hook with special-purpose race surface) Automatic lubrication hook DB 1SF (#9) DB 1 (#11) #9~#18 equivalent to #9~#11 DB 1 (#11) #9~#18 DB 1 (#21) #19~# mm 517 mm 178mm Built-in the machine head Compact AC servo motor directly coupled with the main shaft (direct-drive system) Provided as standard 84.5 Kg Wiper Not provided 0 Provided W 100~120V JUS:North America and Central and South America Control panel Not provided CP-160 CP ~120V,, 3-phase /Power rating 400 VA To order, contact your nearest JUKI distributors. INTERNATIONAL SALES H.Q , KOKURYO-CHO, CHOFU-SHI, TOKYO , JAPAN PHONE : (81) ~5 FAX : (81) TELEX : J Specifications and appearance are subject to change without prior notice for improvement. Read the instruction manual before putting the machine into service to ensure safety. The description in this catalog is as of June, JUNE, 1999 Printed in Japan(M)
DDL-5550N-7 DDL-5550N-7-WB/CP-160
1-needle, Lockstitch Machine with an Automatic Thread Trimmer DDL-5550N-7 DDL-5550N-7-WB/CP-160 Newly developed lockstitch machine provides upgraded quality and a comfortable production environment that
More informationDLU-5490N DLU-5490N-7 (with an automatic thread trimmer)
1-needle, Bottom & Variable Top-feed Lockstitch Machine -7 (with an automatic thread trimmer) -7-WB/CP-160 With its bottom and variable top-feed mechanism, the machine widely adapts to diversified applications
More information2-needle, Lockstitch Machine LH-3100 SERIES
2-needle, Lockstitch Machine LH-3100 SERIES 2-needle,, Lockstitch Machine LH-3128 LH-3168 (with an organized split needle bar) LH-3178 (with large hooks) LH-3188 (with an organized split needle bar and
More informationAdoption of the direct-drive mechanism promises energy-saving and increased workability.
LH-3500A Series Semi-dry head, 2-needle Lockstitch Machine Adoption of the direct-drive mechanism promises energy-saving and increased workability. LH-3568A-SF-7-WB/CP-18A The LH-3500A Series which improves
More informationDDL-9000A Series. Direct-drive, High-speed, Lockstitch Machine with Automatic Thread Trimmer. High-end model of JUKI 1-needle lockstitch machines
DDL-9000A Series Direct-drive, High-speed, Lockstitch Machine with Automatic Thread Trimmer DDL-9000A Series High-end model of JUKI 1-needle lockstitch machines A genuine sewing machine which makes the
More informationAdoption of the direct-drive mechanism promises energy-saving and increased workability.
LH-3500A Series Semi-dry head, 2-needle Lockstitch Machine LH-3528A / LH-3528A-7 LH-3578A / LH-3578A-7 (with organized split needle bar) LH-3568A / LH-3568A-7 LH-3588A / LH-3588A-7 Adoption of the direct-drive
More informationPost-bed, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook PLC
PLC-1700 Series Post-bed, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook Most-advanced machine lineup best suited to the stitching process for heavy weight materials such as car seats and
More informationSemi-dry-head, High-speed, Overlock / Safety Stitch Machine
Semi-dry-head, High-speed, Overlock / Safety Stitch Machine MO-6714D JUKI s dry-head technology eliminates oil stains on the sewing product. MO-6100D Series is the world s first complete dry-head overlock
More information4-needle, Feed-off-the-arm, Flatseamers, Top and Bottom Coverstitch Machine
MF-3620 Series 4-needle, Feed-off-the-arm, Flatseamers, Top and Bottom Coverstitch Machine JUKI's original design The sewing machine promises a maximum sense of safety and comes with enormous ingenuity-filled
More informationDry-head, High-speed, Overlock / Safety Stitch Machine MO-6100D. Series. The World s First MO-6114D
Dry-head, High-speed, Overlock / Safety Stitch Machine MO-6100D Series The World s First MO-6114D MO-6100D Series THE WORLD'S FIRST DRY-HEAD OVERLOCK MACHINE! JUKI's technology for developing machines
More informationHigh-speed, overlock / safety stitch machine. MO-6700S Series MO-6714S
High-speed, overlock / safety stitch machine MO-6700S Series MO-6714S A general-purpose advanced machine that responds to various kinds sewing materials and processes. The MO-6700S Series responds to various
More informationPost-bed, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook
PLC-2700 Series Post-bed, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook It is the most-advanced sewing machine which is best-suited to the sewing of heavy weight materials sewing processes
More informationMF-7500 Series. MF-7500D Series. High-speed, Flat-bed, Top & Bottom Coverstitch Machine. Semi-dry-head, Flat-bed, Top & Bottom Coverstitch Machine
MF-7500 Series High-speed, Flat-bed, Top & Bottom Coverstitch Machine MF-7500D Series Semi-dry-head, Flat-bed, Top & Bottom Coverstitch Machine MF-753D-U11-B56 The MF-7500 Series is a newly developed coverstitch
More informationMB-1800B (with a wiper unit) MB-1800A/BR10 (with a button feeder)
Computer-controlled, Dry-head, High-speed, Single-thread, Chainstitch utton Sewing achine -1800 (with a wiper unit) -1800/R10 (with a button feeder) new button sewing machine that supports many different
More informationHigh-speed, overlock / safety stitch machine. MO-6700S Series MO-6714S
High-speed, overlock / safety stitch machine MO-6700S Series MO-6714S A general-purpose advanced machine that responds to various kinds sewing materials and processes. The MO-6700S Series responds to various
More informationHigh-speed, Variable Top-feed, Overlock / Safety Stitch Machine. MO-6900R Series MO-6914R
High-speed, Variable Top-feed, Overlock / Safety Stitch Machine MO-6900R Series MO-6914R The MO-6900R Series comes with a newlydeveloped feed mechanism that moves the top and bottom feeds separately. With
More informationLK-1910 LK-1920 (With intermediate presser) LK-1930 (With intermediate presser and input function)
Computer-controlled, High-speed Shape-tacking Machine [Sewing area: 60mm (L) 100mm (W)] LK-1910 LK-1920 (With intermediate presser) LK-1930 (With intermediate presser and input function) Every product
More informationHigh-speed, overlock / safety stitch machine. MO-6700S Series MO-6714S
High-speed, overlock / safety stitch machine MO-6700S Series MO-6714S A general-purpose advanced machine that responds to various kinds sewing materials and processes. The MO-6700S Series responds to various
More informationMF-7200D. Series DRY-HEAD TECHNOLOGY. MF-7200D Series. Small-cylinder-bed, Top and Bottom Coverstitch Machine
MF-7200D Series Semi-dry-head, Small-cylinder-bed, Top and Bottom Coverstitch Machine The sewing machine is applicable to the sewing of sleeve cuffs, necklines and children's wear. Small-cylinder-bed,
More informationMB-1800B (with wiper unit) MB-1800A/BR10 (with button feeder)
Computer-controlled, Dry-head, High-speed, Single-thread, Chainstitch utton Sewing achine -1800 (with wiper unit) -1800/R10 (with button feeder) new button sewing machine that supports many different button
More informationSC-500 ENGINEER S MANUAL
R SC-500 ENGINEER S MANUAL 4009500 No.E359-00 PREFACE This Engineer s Manual is written for the technical personnel who are responsible for the service and maintenance of the machine. The Instruction Manual
More informationS-7200C S-7200C. Single needle direct drive straight lock stitcher with thread trimmer
Single needle direct drive straight lock stitcher with thread trimmer The best energy-saving machine in the industry has been realized with a new original motor developed in-house. The cutting-edge dry
More informationCONTENTS 1. SPECIFICATIONS SET-UP FOR THE OPERATOR MAINTENANCE... 34
ENGLISH ii CONTENTS. SPECIFICATIONS... 2. SET-UP.... Installing the motor unit... 2. Installing the control box... 3. Installing the belt... 2 4. Adjusting the pulley cover... 2 5. Installation and adjustment
More informationSuper-high-speed, Overlock / Safety Stitch Machine MO-6914S. MO-6900S Series. High-quality machine with easier operation and increased reliability.
MO-6900S Series Super-high-speed, Overlock / Safety Stitch Machine MO-6914S MO-6900S Series High-quality machine with easier operation and increased reliability. High-quality machine with easier operation
More informationENGINEER S MANUAL No.01
1-NEEDLE, UNISON FEED, LOCKSTITCH MACHINE (AUTOMATIC LUBRICATION) LU-1510 1-NEEDLE, UNISON FEED, LOCKSTITCH MACHINE WITH AUTOMATIC THREAD TRIMMER (AUTOMATIC LUBRICATION) LU-1510-7 1-NEEDLE, UNISON FEED,
More informationUnison-feed,Lockstitch Machine with automatic thread trimmer of V-Belt type
LU-2800-6 eries Unison-feed,Lockstitch Machine with automatic thread trimmer of V-Belt type High and long arm has been adopted. The long distance from the machine arm to the needle contributes to improved
More informationMF-7900 Series High-speed, Cylinder-bed, Top & Bottom Coverstitch Machine
MF-7900 Series High-, Cylinder-bed, Top & ottom Coverstitch Machine MF-7900D Series Semi-dry-head, Cylinder-bed, Top & ottom Coverstitch Machine MF-7923D--56 SEWING MACHINERY & SYSTEMS USINESS UNIT 2-11-1,
More informationIMPORTANT SAFETY INSTRUCTIONS
CONTENTS 1.SPECIFICATIONS... 1 2.INSTALLATION... 1 3.INSTALLATION OF THE SYNCHRONIZER... 2 4.ASSEMBLY OF HAND WHEEL... 2 5.INSTALLATION OF HAND WHEEL... 2 6.INSTALLING THE BELT COVER... 3 7.ADJUSTING THE
More informationMO-6700DASeries. JUKI's dry-head technology protects the sewing products from oil stains. Maximum sewing speed is increased to MO-6714DA
MO-6700DA Series Semi-dry-head, High-speed, Overlock / Safety Stitch Machine Maximum sewing speed is increased to 7,000sti/min MO-6714DA MO-6700DASeries JUKI's dry-head technology protects the sewing products
More informationLU-2200N Series. Capabilities for sewing car seats have been significantly improved. high speed. powerful. high performance
LU-2200N eries High-speed, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook and utomatic Thread Trimmer high speed powerful high performance LU-2200N eries apabilities for sewing car seats
More informationPLC-1700 Series PLC-1710, , 1760, , 1760L
Post-bed, Unison-feed, Lockstitch Machine PLC-1700 Series PLC-1710, 1710-7, 1760, 1760-7, 1760L ENGINEER S MANUAL 40040656 No.E372-00 Introduction This Engineer s Manual is for technical service engineers.
More informationDDL-8700B-7 INSTRUCTION MANUAL
DDL-8700B-7 INSTRUCTION MANUAL I CONTENTS I. SPECIFICATIONS... 1 II. SET-UP... 3 1. Installation...3 2. Installing the pedal sensor...4 3. Connecting the connector...4 4. How to install the power plug...5
More informationHigh-speed, Variable Top-feed, Overlock / Safety Stitch Machine MO-6914R. MO-6900R Series. A smooth feed mechanism free from damage on the material.
MO-6900R Series High-speed, Variable Top-feed, Overlock / Safety Stitch Machine MO-6914R MO-6900R Series A smooth feed mechanism free from damage on the material. The MO-6900R Series comes with a newlydeveloped
More informationDDL-900A INSTRUCTION MANUAL
DDL-900A INSTRUCTION MANUAL COVERI CONTENTS I. SPECIFICATIONS... 1 II. SET-UP... 3 1. Installation...3 2. Installing the pedal sensor...4 3. Installing the power switch (for CE)...4 4. Connecting the connector...5
More informationPLC-2700 Series INSTRUCTION MANUAL
PLC-2700 Series INSTRUCTION MNUL CONTENTS 1. SPECIFICTIONS... 1 2. INSTLLTION... 4 2-1. Installation of the sewing machine...4 2-2. djusting the belt tension (PLC-2710, 2760, 2760L, 2765)...6 2-3. Pneumatic
More informationDDL-900B INSTRUCTION MANUAL
DDL-900B INSTRUCTION MANUAL CONTENTS I. SPECIFICATIONS... 1 II. SET-UP... 3 1. Installation...3 2. Installing the pedal sensor...4 3. Installing the power switch (for CE)...4 4. Connecting the connector...5
More informationLU-2200N Series. Capabilities for sewing car seats have been significantly improved. high speed. powerful. high performance
LU-2200N eries High-speed, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook and utomatic Thread Trimmer high speed powerful high performance LU-2200N eries apabilities for sewing car seats
More informationENGLISH IP-110 TYPE F. No.00. * "CompactFlash(TM)" is the registered trademark of SanDisk Corporation, U.S.A.
ENGLISH IP-0 TYPE F Instruction Manual * "CompactFlash(TM)" is the registered trademark of SanDisk Corporation, U.S.A. No.00 40 CONTENTS. INSTALLING THE OPERATION PANEL... 2. CONNECTING THE CORD... 3.
More informationDDL-9000C-S INSTRUCTION MANUAL
DDL-9000C-S INSTRUCTION MANUAL CONTENTS 1. SPECIFICATIONS... 1 1-1. Specifications of the sewing machine head... 1 1-2. Specifications of the control box... 1 2. SET UP... 2 2-1. Drawing of table... 2
More informationAK-154 INSTRUCTION MANUAL
AK-154 INSTRUCTION MANUAL 1 CONTENTS 1. FEATURES... 1 2. INSTALLATION... 2 3. HOW TO SELECT THE FUNCTION OF AUTO-LIFTER... 5 4. OTHERS (Advanced edition)... 6 4-1. Function for reducing the presser foot
More informationDDL-900BB INSTRUCTION MANUAL
DDL-900BB INSTRUCTION MANUAL CONTENTS I. SPECIFICATIONS... 1 II. SET-UP... 3 1. Installation...3 2. Installing the pedal sensor...4 3. Installing the power switch (for CE)...5 4. Connecting the connector...6
More informationMS-1190 Series (2-needle) MS-1261 Series (3-needle)
MS-1190 Series (2-needle) MS-1261 Series (3-needle) Feed-off-the-arm, Double Chainstitch Machine MS-1261/ V045S The machine finishes a wide range of high-quality products, from silk to extra heavy-weight
More informationSemi-dry Direct-drive, Unison-feed, Lockstitch Machine with Vertical-axis Large Hook
U-2800 eries emi-dry irect-drive, Unison-feed, ockstitch Machine with Vertical-axis arge ook igh and long arm has been adopted. The long distance from the machine arm to the needle contributes to improved
More informationPlease read this manual before using the machine. Please keep this manual within easy reach for quick reference.
INSTRUCTION MANUAL Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. HIGH SPEED SINGLE NEEDLE STRAIGHT LOCK STITCHER Thank you very much for
More informationSC-922 InStruCtIon Manual
SC-922 Instruction Manual CONTENTS I. SPECIFICATIONS... 1 II. SET-UP... 1 1. Installing to the table...1 2. Installing the motor unit...2 3. Installing the control box...2 4. Installing the belt...3 5.
More informationEd Raichert, Inc Industrial. Equipment. Industrial Sewing. Equipment. Basic Machines. Upholstery Walking Foot Machines
Ed Raichert, Inc Industrial Equipment Catalog 2005 Industrial Sewing Equipment Basic Machines Standard Machines Upholstery Walking Foot Machines Single Needle Alteration and Drapery Overlock and Safety
More informationLK3 B434E LK3-B434EX LK3 B434EX/SF Electronic Lockstitch Pattern Tacker Electronic Lockstitch Pattern Tacker with Stepping Foot
LK3 B434E LK3-B434EX LK3 B434EX/SF Electronic Lockstitch Pattern Tacker Electronic Lockstitch Pattern Tacker with Stepping Foot Specifications Model LK3 B434E LK3 B434EX LK3 B434EX / SF Application Thin,
More informationPlease read this manual before using the machine. Please keep this manual within easy reach for quick reference.
INSTRUCTION MANUAL Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. SINGLE NEEDLE DIRECT DRIVE LOCK STITCHER WITH ELECTRONIC FEEDING SYSTEM
More informationKE-436C Electronic Lockstitch Pattern Tacker with Stepping Foot and Programming function
KE436C Electronic Lockstitch Pattern Tacker with Stepping Foot and Programming function Specifications Stitch formation Maximum sewing speed Maximum pattern size (X x Y) Feed mechanism Stitch length No.
More informationBe Green and Innovative by. Life of the Earth for the Next Generation
Be Green and Innovative by Life of the Earth for the Next Generation Be Green and Innovative Environmental Philosophy Juki Singapore, Sales Support Department JUKI group recognizes that activities of enterprises
More informationIndustrial Sewing Machine TECHICAL MANUAL SEWING MACHINE HEAD. Electronic Pattern Sewing Machine. Model PLK-G1010 A180E593P02
Industrial Sewing Machine TECHICAL MANUAL SEWING MACHINE HEAD Electronic Pattern Sewing Machine Model PLK-G1010 A180E593P02 FOR SAFE USE Before the installation, operation, and inspection for this product,
More informationIndustrial Sewing Machine TECHNICAL MANUAL SEWING MACHINE HEAD. Electronic Pattern Sewing Machine. Model PLK-G2516 A180E621P01
Industrial Sewing Machine TECHNICAL MANUAL SEWING MACHINE HEAD Electronic Pattern Sewing Machine Model PLK-G2516 A180E621P01 FOR SAFE USE Before the installation, operation, and inspection for this product,
More informationIndustrial Sewing Machine TECHNICAL MANUAL SEWING MACHINE HEAD. Electronic Pattern Sewing Machine. Model PLK-G1010 A180E593P03
Industrial Sewing Machine TECHNICAL MANUAL SEWING MACHINE HEAD Electronic Pattern Sewing Machine Model PLK-G1010 A180E593P03 FOR SAFE USE Before the installation, operation, and inspection for this product,
More informationPlease read this manual before using the machine. Please keep this manual within easy reach for quick reference.
INSTRUCTION MANUAL Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. SINGLE NEEDLE DIRECT DRIVE STRAIGHT LOCK STITCHER WITH THREAD TRIMMER
More informationDB2-DD7100 PRODUCT MANUAL. m Perspective view ) ) II Memory switches D Outline... 1
) ),... ' DB2-DD7100 Single needle direct drive straight lock stitcher with thread trimmer PRODUCT MANUAL D Outline... 1 II Specifications............ 1 II Sales points... 3 II Optional parts... 7 II DIP
More informationPARTS LIST. Specification code: (JAI 45231) (JA) (JCA) (JUK) (JHBV)
PARTS LIST Specification code: 832-711-004 (JAI 45231) 832-712-005 (JA) 832-713-006 (JCA) 832-714-007 (JUK) 832-716-009 (JHBV) 14 13 1 2 6 10 12 9 11 8 7 3 5 4 7 1 KEY PART NO. NO. NAME 1 832649011 Needle
More information/ SC-915 IP-100D / SC-916 ENGINEER S MANUAL
R Computer-controlled, Direct-drive, High-speed, 1-needle, Lockstitch, Zigzag Stitching Machine LZ-2290A Series IP-100A / SC-915 IP-100D / SC-916 ENGINEER S MANUAL 40011067 No.E355-01 1. SPECIFICATIONS
More informationProductivity and sewing quality are combined at the highest level ever.
Productivity and sewing quality are combined at the highest level ever. The world s highest max. sewing speed 2,500 rpm enhances productivity The maximum sewing speed of 2,500 rpm has been achieved by
More informationElectronic eyelet button holer RH-9820
Electronic eyelet button holer RH-9820 Enhanced productivity with the world s highest max. sewing speed 2,500 rpm Fine stitches with high-precision stitch point Large arm pocket allowing smooth material
More informationINDUSTRIAL SEWING MACHINES PLK-G4030/G4030R PLK-G6030/G6030R PLK-G5050/G5050R PLK-G10050/G10050R. Wide-area Series
INDUSTRIAL SEWING MACHINES PLK-G4030/G4030R PLK-G6030/G6030R PLK-G5050/G5050R PLK-G10050/G10050R Wide-area Series Advanced, Large G Series Equipped with Industry-leading Machine Specifications 1 2 3 4
More informationAPW Series. The machine is flexibly adaptable to the sewing of various pockets.
APW Series APW-895 / Lockstitch, Automatic Welting Machine (for straight pockets with flaps) APW-896 / Lockstitch, Automatic Welting Machine (for slanted pockets with flaps) The machine is flexibly adaptable
More informationElectronic eyelet button holer RH-9820 Enhanced productivity with the world s highest max. sewing speed 2,500 sti/min Fine stitches with high-precision stitch point Large arm pocket allowing smooth material
More informationMSK-8900M Industrial Sewing Machine. Instruction Manual
MSK-8900M Industrial Sewing Machine Instruction Manual CONTENTS Operation instruction. Brief introduction. Main specifications. Main parts name 4. The method of installation 5 5. Pareparation before sewing
More informationModel PLK-G5050 PLK-G10050
Industrial Sewing Machine TECHNICAL MANUAL SEWING MACHINE HEAD Electronic Pattern Sewing Machine Model PLK-G5050 PLK-G10050 A180E686P01 FOR SAFE USE Before the installation, operation, and inspection for
More informationUSER S MANUAL. SS-7350 Series. Small cylinder bed interlock sewing machine
R USERS MANUAL SS-7350 Series Small cylinder bed interlock sewing machine R Best Quality Best Price Best Service 1. Thank you for purchasing our product. Based on the rich expertise and experience accumulated
More informationThe sewing machine operation can be changed by changing the setting of the memory switch.
5. Memory switches The sewing machine operation can be changed by changing the setting of the memory switch. (1) Memory switch start and change 1. When the key is pressed in the state that the sewing LED
More informationPREMIER SERIES BY P1255RBL-18 P2339RBL-18
PREMIER SERIES BY P1255RBL-18 P2339RBL-18 P2339RBL-18 P1255RBL-18 P2339RBL- P1255RB- P2339RBL- 1. P2339RBL 18 Machine casting components Line Part Number Description Qt. Notes 1 300 1002 Machine
More informationAMS-224EN6060 / IP-420 INSTRUCTION MANUAL
AMS-224EN6060 / IP-420 INSTRUCTION MANUAL * This Instruction Manual only describes the functions which are different from those of the AMS-224EN/IP-420. In order to use the AMS-224EN6060 safely, please
More informationIndustrial Sewing Machine TECHNICAL MANUAL MECHANICAL VERSION. Electronic Pattern Sewing Machine. Model PLK-E2010R A180E530P01
Industrial Sewing Machine TECHNICAL MANUAL MECHANICAL VERSION Electronic Pattern Sewing Machine Model PLK-E2010R A180E530P01 FOR YOUR SAFETY! If you are operating the sewing machine for first time, please
More informationAMS-224EN4530R / AW-3 AMS-224EN6030R / AW-3 INSTRUCTION MANUAL
AMS-224EN4530R / AW-3 AMS-224EN6030R / AW-3 INSTRUCTION MANUAL 1 CONTENTS 1. GENERAL...1 1-1. Specifications of AW-3...1 1-2. Configuration...2 2. INSTALLATION...4 2-1. Installation procedure...4 2-2.
More informationVersion 03 USER S MANUAL PARTS BOOK FORTUNA. AC Servo Motor series. From the library of: Superior Sewing Machine & Supply LLC
R Version 03 USER S MANUAL PARTS BOOK FORTUNA AC Servo Motor series From the library of: Superior Sewing Machine & Supply LLC R From the library of: Superior Sewing Machine & Supply LLC Best Quality Best
More informationPlease read this manual before using the machine. Please keep this manual within easy reach for quick reference.
INSTRUCTION MANUAL Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. SINGLE NEEDLE DIRECT DRIVE LOCK STITCHER WITH ELECTRONIC FEEDING SYSTEM
More informationKE-430D BE-438D ELECTRONIC DIRECT DRIVE LOCKSTITCH BAR TACKER ELECTRONIC DIRECT DRIVE LOCKSTITCH BUTTON SEWER
KE-430D ELECTRONIC DIRECT DRIVE LOCKSTITCH BAR TACKER BE-438D ELECTRONIC DIRECT DRIVE LOCKSTITCH BUTTON SEWER Thank you very much for buying a BROTHER sewing machine. Before using your new machine, please
More informationMB-1800 Series INSTRUCTION MANUAL
MB-800 Series INSTRUCTION MANUAL CONTENTS!. SPECIFICATIONS... @. NAME OF EACH COMPONENT.... Name of the main unit... #. INSTALLATION... $. PREPARATION OF THE SEWING MACHINE...7. Attaching the needle...
More informationMITSUBISHI. Industrial Sewing Machine. Model PLK-E1010 TECHNICAL MANUAL MECHANICAL VERSION. Electronic Pattern Sewing Machine A180E494P01
MITSUBISHI Industrial Sewing Machine TECHNICAL MANUAL MECHANICAL VERSION Electronic Pattern Sewing Machine Model PLK-E00 A80E9P0 FOR YOUR SAFETY! If you operate the sewing machine first time, please make
More informationLK-1900BN Series INSTRUCTION MANUAL
LK-1900BN Series INSTRUCTION MANUAL 1 CONTENTS I. EXPLANATION OF THE LK-1900BN, COMPUTER-CONTROLLED HIGH- SPEED BARTACKING MACHINE...1 1. SPECIFICATIONS...1 2. CONFIGURATION...2 2-1. Names of main unit...
More informationLK-1903B/BR35 INSTRUCTION MANUAL
LK-1903B/BR35 INSTRUCTION MANUAL CONTENTS I. SPECIFICATIONS...1 1. Specifications... 1 2. Model classification according to the button size... 2 3. Shape of buttons... 2 II. NAME OF EACH COMPONENT...3
More informationListe de pièces Lista de Piezas Parts List
H74 Liste de pièces Lista de Piezas Parts List 104 23 73-96 17 Nov 2011 A 2 Singer H74 Pos Part No Description 1 416484501 THREAD TAKE UP LEVER COMPLETE 2 416147701 THREAD TAKE UP LEVER SUPPORTER 3 416116001
More informationPlease read this manual before using the machine. Please keep this manual within easy reach for quick reference.
INSTRUCTION MANUAL Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. ELECTRONIC DIRECT DRIVE LOCKSTITCH BUTTON HOLER Thank you very much for
More informationDA-9270 TWIN NEEDLE (THREE NEEDLE) FEED OFF THE ARM DOUBLE CHAIN STITCHER. English
TWIN NEEDLE (THREE NEEDLE) FEED OFF THE ARM DOUBLE CHAIN STITCHER English Thank you very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions below
More informationUSER S MANUAL. KM-1060BL Series KM-1060BL KM-1060BL-7 KM-1062BL KM-1062BL-7
USER S MANUAL KM-1060BL Series KM-1060BL KM-1060BL-7 KM-1062BL KM-1062BL-7 R Best Quality Best Price Best Service 1. Thank you for purchasing our product. Based on the rich expertise and experience accumulated
More informationBAS-300G-484 BAS-300G-484 SF
BAS-300G-484 BAS-300G-484 SF DIRECT DRIVE PROGRAMMABLE ELECTRONIC PATTERN SEWER Please read this manual before using the machine. Please keep this manual within easy reach for quick reference.
More informationKE-430HX KE-430HS BE-438HX
KE-430HX KE-430HS BE-438HX INSTRUCTION MANUAL Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. ELECTRONIC DIRECT DRIVE LOCKSTITCH BAR TACKER
More informationA4 Manual Book. No. 15 Airport South Road, Jiaojiang District, Taizhou, Zhejiang, TEL: FAX:
A4 Manual Book No. 15 Airport South Road, Jiaojiang District, Taizhou, Zhejiang, PRC TEL: 0086-576-88177782 88177767 FAX: 0086-576-88177787 E-mail: sales@chinajack.com www.chinajack.com Catalogue 1...2
More informationPart 3: Service manual, class
Contents Page: Part : Service manual, class 7-75. General.................................................. Gauges................................................. 4. Description and adjustment of the
More informationPARTS LIST. CoverPro 900CP & 1000CP
PARTS LIST CoverPro 900CP & 00CP 1 5 2 7 9 3 6 11 20 23 12 13 1 19 21 2 26 17 16 1 22 15 25 1 No. Part number Description 1 79560300 Face cover unit 2 79501600 Face cover 3 0602006 Thread cutter unit 000115700
More informationBARRACUDA 200ZW PORTABLE WALKING FOOT SEWING MACHINE INSTRUCTION MANUAL
BARRACUDA 00ZW PORTABLE WALKING FOOT SEWING MACHINE INSTRUCTION MANUAL THE BARRACUDA 00ZW PORTABLE WALKING FOOT SEWING MACHINE INSTRUCTION MANUAL MATERIAL IS OWNED BY RELIABLE AND MAY NOT BE REPRODUCED
More informationPlease read this manual before using the machine. Please keep this manual within easy reach for quick reference.
INSTRUCTION MANUAL Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. ELECTRONIC LOCKSTITCH PATTERN TACKER WITH STEPPING FOOT AND PROGRAMMING
More informationInstructions, complete. Operating Instructions. Installation Instructions. Service Instructions
506-3 Instructions, complete Operating Instructions Installation Instructions Service Instructions 2 3 Postfach 7 03 5, D-33703 Bielefeld Potsdamer Straße 90, D-3379 Bielefeld Telefon +49 (0) 52 / 9 25-00
More informationPEGASUS at Texprocess Americas 2016
April 1. 2016 PEGASUS at Texprocess Americas 2016 May 3 (Tue.) 5 (Thu.) the U.S.A., Georgia World Congress Center Building B, Halls B1-B4 PEGASUS CORPORATION OF AMERICA
More informationINSTRUCTION MANUAL. This instruction manual applies to machines from the following serial numbers onwards: #
245 246 INSTRUCTION MANUAL This instruction manual applies to machines from the following serial numbers onwards: # 6 500 24 296-2-9 99/002 Betriebsanleitung engl. 05.2 This Instruction Manual is valid
More informationPlease read this manual before using the machine. Please keep this manual within easy reach for quick reference.
DA-927A DA-928A INSTRUCTION MANUAL Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. TWIN NEEDLE / THREE NEEDLE FEED OFF THE ARM DOUBLE CHAIN
More information/11, -14/31 INSTRUCTION MANUAL. This instruction manual applies to machines from the following serial numbers onwards: #
3834-4/, -4/3 INSTRUCTION MANUAL This instruction manual applies to machines from the following serial numbers onwards: # 2 733 53 296-2-8 936/002 Betriebsanleitung engl. 06.09 This Instruction manual
More informationUSER S MANUAL. SPS/E-1507 Series. Electronically Controlled Pattern Sewing Machine (Mechanical Part)
R USERS MANUAL SPS/E-1507 Series Electronically Controlled Pattern Sewing Machine (Mechanical Part) R Best Quality Best Price Best Service 1. Thank you for purchasing our product. Based on the rich expertise
More informationPMX A H AH(D)21 Series digital AC servo control system
AH(D)21 Series digital AC servo control system AH21-55 AH(D)21 (esave) PMX AH(D)21 digital AC servo control system is used for driving control for industrial lockstitch sewing machine, it can have stepless
More informationThe Sewing Machine Course
The Sewing Machine Course Video 1 - The Sewing Machine Overview Part 1 - The right machine for you. Choosing a machine is a very important part in the hobby of sewing as this is the main piece of equipment
More informationINSTRUCTION MANUAL STH-8BLD-3. From the library of: Superior Sewing Machine & Supply LLC SEIKO SEWING MACHINE CO., LTD.
INSTRUCTION MANUAL STH-8BLD-3 SEIKO SEWING MACHINE CO., LTD. CONTENTS 1. MAIN PARTS NAMES. 1 2. SPECIFICATIONS 1 3. WORK TABLE AND MOTOR 2 4. INSTALLATION 4-1. Installing the rubber hinge and the corner
More informationIndustrial 3721/3741/3745/3791. Documented Quality - Stitch by Stitch
Industrial 3721/3741/3745/3791 Documented Quality - Stitch by Stitch Documented quality The POWERLINE 3721, 3741, 3745 and 3791 are quality assurance systems designed for use on safety-relevant seams.
More informationEstablishment: August 1989 Address: 73 Mau Than street - An Hoa Ward - Ninh Kieu District - Can Tho City Acreage: 8,509 Square meters Employee: 1,650
TAY DO PROFILE Establishment: August 1989 Address: 73 Mau Than street - An Hoa Ward - Ninh Kieu District - Can Tho City Acreage: 8,509 Square meters Employee: 1,650 Production line: 24 lines Capacity:
More informationRH-981A ENGLISH ELECTRONIC EYELET BUTTON HOLER
ENGLISH ELECTRONIC EYELET BUTTON HOLER Thank you very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions below and the explanations given in the
More information