Product Data. 340AAV 4-Way Multipoise Fixed-Capacity Condensing Gas Furnace Sizes 040 thru 140

Transcription

1 4-Way Multipoise Fixed-Capacity Condensing Gas Furnace Sizes 040 thru 140 Product Data A0086 The model Multipoise Condensing Furnace is specifically designed to meet the needs of the new construction market. This high -efficiency furnace utilizes a unique 4 -way multipoise design and compact size to fit where other furnaces will not. The model can be installed in any of 4 positions including horizontally in attics or crawlspaces, freeing space formerly used as a utility or furnace room. Except for the 140 size, all sizes of the model can be installed in a manufactured (mobile) home when the optional kit is used. With the exception of the 140 size, all sizes can be installed with 2 -pipe or 1 -pipe venting. The 140 size can be installed only as a 2 -pipe system. Sidewall or through -the-roof venting options and the use of PVC pipe eliminate the need for dedicated chimneys or chaseways to facilitate furnace venting. Time -saving installation features yield a very cost effective way to provide new home buyers with a high -efficiency and high -quality home comfort system. FEATURES Energy Star Compliant Gas Furnace 3 -Pass Primary Heat Exchangers - This design accelerates heat transfer and extracts heat that conventional heat exchangers waste up the flue. The primary heat exchanger is made of aluminized steel for corrosion resistance. Combustion Air and Ventilation - The advanced design allows Schedule 40PVC, PVC -DWV, SDR -21 PVC, SDR -26 PVC (not approved in Canada), ABS -DWV, or ABSF628 Schedule 40 pipe to bring outdoor air into the furnace for combustion. The extracted heat lowers the temperature of the combustion products to a point (typically below 11_F (46_C) that any of the approved types of pipe can also be used for venting combustion products outside the structure. The combustion -air and vent pipes can terminate through a side wall or through the roof when using one of our approved vent termination kits. Flow -Through Secondary Heat Exchangers - Each cell is laminated with our patented Everlastict polypropylene for greater resistance to corrosion. This breakthrough in heating technology helps extend the life of the furnace for years of dependable performance. The heat exchanger is positioned in the furnace to extract additional heat from the combustion products regardless of furnace orientation. Perfect Lightt Igniter - The unique Bryant SiN igniter is not only physically robust but it is also electrically robust. It is capable of running at line voltage and does not require complex voltage regulators as do other brands. This unique feature further enhances the reliability of gas furnace and continues Bryant s tradition of technology leadership and innovation in providing a reliable and durable product. Control Center - The printed -circuit board and all internal wiring are factory installed. Convenient terminals permit quickconnection of a thermostat and air conditioning control circuits. Connections for a humidifier and air cleaner are also provided. 4 -Way Multipoise Design - Allows a model to be installed in an upflow, downflow, or horizontal orientation. The model is available in 12 heat/airflow combinations, and when combined with the 4 -way design, allows for 48 different applications. Factory configured for upflow application, this furnace can easily be made ready for downflow or horizontal installations. Direct or Non -direct Venting - The can be installed as a 1 pipe/non -Direct vent or 2 pipe/direct vent furnace except the 140 size which can be installed as 2 -pipe only. This provides added flexibility to meet diverse installation needs. Insulated Casing - Foil -faced insulation in the heat exchanger section cuts heat loss. The casing also has the required openings for left - or right -side connection of gas, electric, drain, and vent connections. Certifications - The units are CSA (A.G.A./C.G.A.) design certified for use with natural and propane gases, as well as AHRI efficiency rating certified. The furnace is factory shipped for use with natural gas. A CSA (A.G.A./C.G.A.) listed gas conversion kit is required to convert furnace for use with propane gas. The model meets California Air Quality Management District emission requirements. Except for the 140 size unit, all models can be installed in a manufactured (mobile) home when the optional kit is used, and in elevations up to,000 ft. (3048 M) (140 size unit limitation of 7,000 ft. ( M). Quality Registration - The is engineered and manufactured under an ISO 9001 registered quality system. 1

2 DIMENSIONS " TYP (368mm) " (684mm) " (667mm) " (666mm) 22 16" (67mm) 2-IN. COMBUSTION- AIR CONN (1mm) 1 2-IN. DIA GAS CONN (13mm) 2-IN. VENT CONN (1mm) 1 2-IN. DIA THERMOSTAT (13mm) ENTRY " (76mm) SIDE INLET CONDENSATE DRAIN TRAP LOCATION (DOWNFLOW & HORIZONTAL LEFT) 7 8-IN. DIA (22mm) POWER CONN 7 8-IN. DIA (22mm) ACCESSORY POWER ENTRY CONDENSATE DRAIN TRAP LOCATION (ALTERTE UPFLOW) " TYP (240mm) " TYP (74mm) 27 8" (2mm) " TYP (0mm) " (622mm) 17 16" (0mm) " (783mm) 32 8" TYP (829mm) 13 16" (21mm) " TYP (84mm) AIRFLOW A D 13 16" OUTLET (21mm) CONDENSATE DRAIN TRAP LOCATION (DOWNFLOW & HORIZONTAL RIGHT) OR ALTERTE 1 2-IN. DIA GAS CONN " (77mm) 9 16" TYP (14mm) " (464mm) " (724mm) " (694mm) " (667mm) 22 16" (67mm) 19" (483mm) OUTLET 2-IN. COMBUSTION- AIR CONN 1 2-IN. DIA GAS CONN 7 8-IN. DIA POWER CONN 1 2-IN. DIA THERMOSTAT ENTRY 2-IN. VENT CONN " SIDE INLET 13 16" (21mm) 8" (16mm) 16" (8mm) " (13mm) 1" (2mm) INLET 1 1 4" (32mm) 23 1 CONDENSATE 1" 4" TYP(91mm) DRAIN LOCATION 11 16" E (2mm) SIDE INLET (UPFLOW) (17mm) " TYP(684mm) 11 16" (17mm) CONDENSATE DRAIN LOCATION (UPFLOW) DIMPLE LOCATORS FOR HORIZONTAL HANGING " TYP (6mm) " BOTTOM INLET (614mm) A " (11mm) 11 16" (17mm) NOTES: 1. Minimum return-air openings at furnace, based on metal duct. If flex duct is used, see flex duct manufacturer s recommendation for equivalent diameters. 2. Minimum return-air opening at furnace: a. For 800 CFM 16-in. (406mm) round or 14 1 / 2 (368mm) x 12-in. (30mm) rectangle. b. For 10 CFM -in. (08mm) round or 14 1 / 2 (368mm) x 19 1 / 2-in. (mm) rectangle. c. For 1600 CFM 22-in.(9mm) round or 14 1 / 2 (368mm) x 23 1 / 4-in.(91mm) rectangle. d. For airflow requirements above 1800 CFM, see Air Delivery table in Product Data literature for specific use of single side inlets. The use of both side inlets, a combination of 1 side and the, or the only will ensure adequate return air openings for airflow requirements above 1800 CFM at 0. W.C. ESP. Dimensions --- IN. (mm) A D E /2 () 1-7/8 (403) 16 (406) /2 () 1-7/8 (403) 16 (406) /2 () 1-7/8 (403) 16 (406) /2 () 1-7/8 (403) 16 (406) /2 () 1-7/8 (403) 16 (406) /2 () 1-7/8 (403) 16 (406) /2 () 1-7/8 (403) 16 (406) (33) 19-3/8 (2) 19-1/2 () (33) 19-3/8 (2) 19-1/2 () (33) 19-3/8 (2) 19-1/2 () /2 (622) 22-7/8 (81) 23 (84) /2 (622) 22-7/8 (81) 23 (84) 2

3 CLEARANCE TO COMBUSTIBLES REV. B LIT TOP A0843 D E S I G N Always Ask For C E R T I F I E D CERTIFIED Use of the AHRI Certified TM Mark indicates a manufacturer s participation in the program. For verification of certification for individual products, go to 3

4 CONTROLS - THERMOSTATS AND ZONING Non -Programmable Thermostat Selection T6 --- C, T2 --- C T6 --- NHP, T2 --- NHP T6 --- NRH{} Programmable Thermostat Selection T2 --- PAC T2 --- PHP T6 --- PAC T6 --- PHP T6 --- PRH} For use with 1--- speed Air Conditioner --- deg. F/C, Auto Changeover For use with 1 or speed Heat Pumps --- deg. F/C, Auto Changeover For multi-use / stage configurations --- deg. F/C, Auto Changeover/Temperature and Humidity Control For use with 1-speed Air Conditioner - deg. F/C, Auto Changeover, 7-Day Programmable For use with 1 or 2-speed Heat Pumps - deg. F/C, Auto Changeover, -2 Day Programmable For use with 1-speed Air Conditioner - deg. F/C, 7 Day Programmable For use with 1 or 2-speed Heat Pumps F/C, Auto Changeover, 7-Day Programmable For multi-use / stage configurations - deg. F/C, Auto Changeover, 7-Day Programmable/Temperature and Humidity Control Zoning Control Selection ZONEBB3ZAC01 ZONEBB3ZHP01 Zone Perfect Two---Zone kit ZONEBB2KIT01---B Zone Perfect Plus 2---Zone kit/temperature and Humidity Control ZONEBB4KIT01---B Zone Perfect Plus 4---Zone kit/temperature and Humidity Control ZONEBB8KIT01---B Zone Perfect Plus 8---Zone kit/temperature and Humidity Control {Thermidistatt Control control can be configured for multiple use and staging. It must be configured for each specific application. }HYBRID HEAT thermostat is used with furnace and heat pump application. 4

5 SPECIFICATIONS Shipping Weight --- Lb. (KG) 164 (74) 16 (7) 172 (78) 1 (77) 1 (77) 189 (86) RATINGS AND PERFORMANCE Input Btuh* 40,000 40,000 60,000 60,000 60,000 80,000 Output Capacity BTUH* (ICS) (Shaded capacities are specified on rating plate) AFUE%{ Nonweatherized ICS Direct Vent (2 --- Pipe) Upflow 37,000 37,000 6,000 6,000 6,000 74,000 Downflow 37,000 37,000 6,000 6,000 6,000 74,000 Horizontal 37,000 37,000 6,000 6,000 6,000 74,000 Non --- Direct Vent (1 --- Pipe) Upflow 37,000 37,000 6,000 6,000 6,000 74,000 Downflow 37,000 37,000 6,000 6,000 6,000 74,000 Horizontal 37,000 37,000 6,000 6,000 6,000 74,000 Direct Vent (2 --- Pipe) Upflow Downflow Horizontal Non --- Direct Vent (1 --- Pipe) Upflow 92.1 Downflow 91 Horizontal 91 Certified Temperature Rise Range F ( C) ( ) ( ) ( ) ( ) ---0 ( ) ( ) Certified External Static Pressure Heating Cooling Airflow CFM} Heating Cooling ELECTRICAL Unit Volts --- Hertz --- Phase Operating Voltage Range Min ---Max** Maximum Unit Amps Unit Ampacity{{ Minimum Wire Size Maximum Wire Length --- Ft (M)}} Maximum Fuse Size or Ckt Bkr Amps (Time---Delay Type Recommended) Transformer (24v) 40va External Control Power Available Heating 12va Cooling 21va Air Conditioning Blower Relay Standard CONTROLS Limit Control SPST Heating Blower Control (Off Delay) Factory---Set at 13 Sec Burners (Monoport) Gas Connection Size 1/2 ---in. NPT GAS CONTROLS Gas Valve (Redundant) Manufacturer White --- Rodgers Min Inlet Pressure (In. W.C.) 4. (Natural Gas) Max Inlet Pressure (In. W.C.) 13.6 (Natural Gas) Ignition Device Hot Surface BLOWER DATA Direct---Drive Motor HP (Permanent Split Capacitor) 1/ 1/3 1/ 1/3 1/2 1/3 Motor Full Load Amps RPM (Nominal) --- Speeds Blower Wheel Diameter x Width (In.) x 6 x 7 x 6 x 7 11 x 8 x 7 Filter Size (In.)---Sold Separately (1) 16 x 2 x 3/4 FACTORY---AUTHORIZED AND LISTED, DEALER---INSTALLED OPTIONS Gas Conversion Kit --- Natural --- to --- Propane KGANP4601ALL Gas Conversion Kit --- Propane --- to --- Natural KGAPN3901ALL Twinning Kit KGATW N/A 0601HSI N/A Manufactured (Mobile) Home Kit KGAMH0301KIT Downflow Base*** KGASB0301ALL Vent Termination Kit (Bracket Only for 2 Pipes) 2---in.---KGAVT01BRA 3---in.---KGAVT01BRA Vent Termination Kit (Single Exit) 2---in.---KGAVT01CVT 3---in.---KGAVT0801CVT Condensate Freeze Protection Kit KGAHT01CFP Condensate Neutralizer Kit (Obtained Thru RCD) P Side Filter Rack (Without Filter)---Upflow ONLY KGAFR06ALL Electronic/Mechanical Air Cleaner Model EACA, EZXCAB, or FILCAB Humidifier Model HUM Heat/Energy Recovery Ventilator Model HRV UV Lights Model UVL Door Gasket Kit KGBAC01DGK Unframed Filter Permanent Washable 3/4---in. thick 16 x 2 (406 x 63 mm) 24 x 2 (6 x 63 mm) KGAWF1306UFR KGAWF106UFR 37 (11.2) 38 (11.) 29 (8.8) 36 (.9)

6 SPECIFICATIONS (CONTINUED) Shipping Weight --- Lb. (KG) 193 (88) 1 (91) 21 (98) 218 (99) 246 (112) 2 (113) RATINGS AND PERFORMANCE Input Btuh* 80,000 80,000 0,000 0,000 1, ,000 Output Capacity BTUH* (ICS) (Shaded capacities are specified on rating plate) AFUE%{ Nonweatherized ICS Direct Vent (2 --- Pipe) Non --- Direct Vent (1 --- Pipe) Direct Vent (2 --- Pipe) Non --- Direct Vent (1 --- Pipe) Certified Temperature Rise Range F ( C) Certified External Static Pressure Airflow CFM} Upflow 74,000 74,000 93,000 93, , ,000 Downflow 74,000 74,000 93,000 93, , ,000 Horizontal 74,000 74,000 93,000 93, , ,000 Upflow 74,000 74,000 93,000 93, ,000 Downflow 74,000 74,000 93,000 93, ,000 Horizontal 74,000 74,000 93,000 93, ,000 Upflow Downflow Horizontal Upflow 92.1 Downflow 91 Horizontal ( ) ---0 ( ) ( ) ( ) ( ) ( ) Heating Cooling Heating Cooling ELECTRICAL Unit Volts --- Hertz --- Phase Operating Voltage Range Min ---Max** Maximum Unit Amps Unit Ampacity{{ Minimum Wire Size Maximum Wire Length --- Ft (M)}} 28 (8.) 31 (9.4) 27 (8.2) 30 (9.1) 30 (9.1) 30 (9.1) Maximum Fuse Size or Ckt Bkr Amps (Time---Delay Type Recommended) 1 1 Transformer (24v) 40va External Control Power Available Heating 12va Cooling 21va Air Conditioning Blower Relay Standard CONTROLS Limit Control SPST Heating Blower Control (Off Delay) Factory---Set at 13 Sec Burners (Monoport) Gas Connection Size 1/2 ---in. NPT GAS CONTROLS Manufacturer White --- Rodgers Gas Valve (Redundant) Min Inlet Pressure (In. W.C.) 4. (Natural Gas) Max Inlet Pressure (In. W.C.) 13.6 (Natural Gas) Ignition Device Hot Surface BLOWER DATA Direct---Drive Motor HP (Permanent Split Capacitor) 1/2 3/4 1/2 3/4 3/4 3/4 Motor Full Load Amps RPM (Nominal) --- Speeds Blower Wheel Diameter x Width --- In. (mm) 11 x 8 (279x 3) 11 x (279x2 4) 11 x 8 (279x 3) 11 x (279x2 4) 11 x (279x24 ) 11 x (279x24 ) Filter Size --- in. (mm) ---Sold Separately (1) x 2 x 3/4 (2)16 x 2 x 3/4 (08 x 63 x 19) (406 x 63 x 19) FACTORY---AUTHORIZED AND LISTED, DEALER---INSTALLED OPTIONS Gas Conversion Kit --- Natural --- to --- Propane KGANP4601ALL Gas Conversion Kit --- Propane --- to --- Natural KGAPN3901ALL Twinning Kit KGATW0601HSI N/A Manufactured (Mobile) Home Kit KGAMH0301KIT N/A Downflow Base*** KGASB0301ALL Vent Termination Kit (Bracket Only for 2 Pipes) 2---in.---KGAVT01BRA 3---in.---KGAVT01BRA Vent Termination Kit (Single Exit) 2---in.---KGAVT01CVT 3---in.---KGAVT0801CVT Condensate Freeze Protection Kit KGAHT01CFP Condensate Neutralizer Kit (Obtained Thru RCD) P Side Filter Rack (Without Filter)---Upflow ONLY KGAFR06ALL Electronic/Mechanical Air Cleaner Model EACB, EZXCAB, or FILCAB Humidifier Model HUM Heat/EnergyRecoveryVentilator Model HRV UV Lights Model UVL Door Gasket Kit KGBAC01DGK Unframed Filter Permanent Washable 3/4---in. (19 mm) thick 16 x 2 (406 x 63 mm) 24 x 2 (6 x 63 mm) KGAWF1306UFR KGAWF106UFR * Gas input ratings are certified for elevations to 00 ft. (6 M) In U.S., for elevations above 00 ft. (6 M), reduce ratings 2% for each 00 ft. (30 M)above sea level. In Canada, derate the unit % from 00 to 400 ft. (6 to 1372 M) above sea level. { Capacity and AFUE in accordance with U.S. Government DOE test procedures. } Airflow shown is for only return---air supply with 3/4---in. (19 mm) filter(s). Air delivery above 1800 CFM may require that both sides, a combination of 1 side and, or only of the furnace be used for return air, see Air Delivery table. Where 2 sets of data are listed, the first set is for only return--- airsupply.thesecondsetisforbothsides,or1sideandreturn---airsupply.afilterisrequiredforeachreturn---airsupply. ** Permissible voltage limits for proper furnace operation. {{ Unit ampacity = 12% of largest component s full load amps plus 0% of all other potential operating components (EAC, humidifier, etc.). }} Length shown is measured 1 way along wire path between unit and service panel for maximum 2% voltage drop. *** Required for installation on combustible floors when no coil box is used, or when any coil box other than a Bryant CD, CK, CAP(R), CNP(R), or KCAKC cased coil is used. N/A --- Not applicable ICS --- Isolated Combustion System 6

7 MAXIMUM ALLOWABLE PIPE LENGTH - ALTITUDE 0 to 00 (0 to 6) ALTITUDE 01 to 3000 (6 to 914) Canada (BTUH) 40,000 60,000 80,000 0,000 1, ,000 (BTUH) 40,000 60,000 80,000 0,000 1, ,000 DIRECT VENT (2-PIPE) ONLY TERMITION TYPE 2Pipeor3-in NON-DIRECT VENT (1-PIPE) ONLY 1 (2) 1 (2) 3 (76) 3 (76) 2-1/2 (64) one 2-1/2 (64) 3 (76) 3 (76) no 3 (76) 2-1/2 (64) one 3 (76) 3 (76) no 4 (2) no DIRECT VENT (2-PIPE) ONLY TERMITION TYPE 2Pipeor3-in NON-DIRECT VENT (1-PIPE) ONLY 3 (76) 3 (76) 3 (76) 3 (76) 3 (76) no 4 (2) no 3 (76) one 4 (2) no 3 (76) no 4 (2) no NUMBER OF 90 ELBOWS (1.) (16.8) (1.) 40 (12.2) 4 (13.7) (1.) 40 (12.1) 60 (18.3) 1 (4.6) 6 (19.8) 60 (18.3) (1.) 60 (18.3) (16.8) 0 (1.2) 3 (.7) 30 (9.1) 30 (9.1) 30 (9.1) 40 (12.2) 3 (.7) 30 (9.1) 2 (7.6) 3 (.6) 6 (17.0) 30 (9.1) 2 (1.8) 2 (7.6) 48 (14.6) NUMBER OF 90 ELBOWS 1 (4.6) 40 (12.2) (.4) 17 (.2) 3 (.7) 14 (4.3) 63 (19.2) 39 (11.8) 62 (18.9) 12 (3.7) 67 (.4) 26 (7.9) 9 (2.7) 62 (18.9) 1 (4.6) 3 (.6) 7 7 (2.1) 66 (.1) 30 (9.1) 16 (4.9) 2 (1.8) 2 (1.8) 47 (14.3) 61 (18.6) 2 (7.6) 16 (4.9) 61 (18.6) 2 (7.6) 6 (1.8) 66 (.1) 61 (18.6) 1 (4.6) 61 (18.6) 62 (18.9) 63 (19.2) 31 (11.9) 61 (18.6) 6 (17.1) (1.) 27 (8.2) 61 (18.6) 0 (1.2) 23 (7.0) 61 (18.6) 43 (13.1) 19 (.8) See notes at end of table. 7

8 MAXIMUM ALLOWABLE PIPE LENGTH - ALTITUDE 3001 to 4000 (914 to 1219) ALTITUDE 4001 to 000 (1219 to 124) (BTUH) 40,000 60,000 80,000 0,000 1, ,000 (BTUH) 40,000 60,000 80,000 0,000 1, ,000 DIRECT VENT (2-PIPE) ONLY TERMITION TYPE 2Pipeor3-in 4 no --- IN (mm)* NON-DIRECT VENT (1-PIPE) ONLY --- IN (mm)* 3 (76) 3 (76) 3 (76) no 3 (76) 4 (2) no 3 (76) one 4 (2) no 3 (76) no 4 (2) no DIRECT VENT (2-PIPE) ONLY TERMITION TYPE 2Pipeor3-in NON-DIRECT VENT (1-PIPE) ONLY 3 (76) 3 (76) 3 (76) no 3 (76) 4 (2) no 4 (2) no 3 (76) no 4 (2) no NUMBER OF 90 ELBOWS (19.) 16 (4.9) 68 (.7) 46 (14.0) 33 (.1) 6 (19.8) 9 (18.0) 11 (3.4) 30 (9.1) 9 (18.0) 11 (3.4) 63 (19.2) 41 (12.) 24 (7.3) 8 (17.7) 9 (18.0) 6 (1.8) 26 (7.9) 4 (16.) 6 (1.8) 62 (18.9) 28 (8.) 1 (4.6) 1 (1.) 8 (17.7) 48 (14.6) 43 (13.1) 7 23 (7.0) 14 (4.3) 66 (.1) (6.7) (1.) 61 (18.6) 38 (11.6) 7 6 (17.1) 13 (4.0) 6 (17.1) 31 (9.4) 6 (17.1) 22 (6.7) 18 (.) NUMBER OF 90 ELBOWS 14 (4.3) (18.3) 1 (4.6) 64 (19.) 31 (9.4) 3 6 (17.1) 21 (6.4) 69 (21.0) (16.8) 9 (18.0) 39 (11.9) 22 (6.7) 46 (14.0) (16.8) 17 (.1) 64 (19.) 0 (1.2) (1.) 8 (17.7) 26 (7.9) 13 (4.0) 67 (.4) 40 (12.2) 4 (16.) 13 (3.9) 9 (17.9) 4 (13.7) 39 (11.9) 3 21 (6.4) 12 (3.7) 62 (18.9) 33 (.1) 3 9 (2.7) 4 (16.4) 2 (1.8) 7 26 (7.9) 2 (1.8) (1.) (1.0) 2 (1.8) 11 (3.4) 2 (1.8) 2 (1.8) See notes at end of table. 8

9 MAXIMUM ALLOWABLE PIPE LENGTH - ALTITUDE 001 to 6000 (124 to 1829) ALTITUDE 6001 to 00 (1829 to 2134) (BTUH) 40,000 60,000 80,000 0,000 1, ,000 (BTUH) 40,000 60,000 80,000 0,000 1, ,000 DIRECT VENT (2-PIPE) ONLY TERMITION TYPE 2Pipeor3-in NON-DIRECT VENT (1-PIPE) ONLY 3 (76) 3 (76) 3 (76) no 3 (76) 4 (2) no 4 (2) no 3 (76) no 4 (2) no DIRECT VENT (2-PIPE) ONLY TERMITION TYPE 2Pipeor3-in NON-DIRECT VENT (1-PIPE) ONLY 3 (76) 3 (76) 3 (76) no 3 (76) 4 (2) no NUMBER OF 90 ELBOWS (4.3) 60 (18.3) 41 (12.) 29 (8.8) 42 (12.8) 3 12 (3.6) 42 (12.8) 2 (1.8) 9 (2.7) (16.8) 36 (11.0) 21 (6.4) 67 (.4) 3 (.7) 2 (1.8) 8 (2.4) 37 (11.2) 47 (14.3) 42 (12.8) 40 (12.2) 3 (.7) 4 (16.) 23 (7.0) 12 (3.7) 62 (18.9) 29 (8.8) 0 (1.2) 18 (.) 11 (3.4) 7 22 (6.7) 48 (14.6) 17 (.2) 2 (1.8) 1 (4.6) 48 (14.6) 47 (14.3) 8 (2.4) 47 (14.3) 9 (2.7) 47 (14.3) 32 (9.7) 27 (8.2) NUMBER OF 90 ELBOWS 22 (6.7) 17 (.1) (4.0) 7 38 (11.6) 27 (8.2) 68 (.7) 31 (9.4) 17 (.1) 48 (14.6) 8 (2.4) 2 (1.8) 33 (.1) 19 (.8) 63 (19.2) 24 (7.3) 48 (14.6) 12 (3.6) 43 ( (.7) 38 (11.6) 67 (.4) 37 (11.3) 66 (.1) 32 (9.8) 64 (19.) 0 (1.2) 21 (6.4) 68 (.7) 8 (17.7) 18 (.) 47 (14.3) 7 (2.1) 4 (13.7) 16 (4.9) 67 (.4) 9 (2.7) 3 11 (3.4) 4 (13.7) 1 (4.6) 66 (.1) 48 (14.6) 43 (13.1) 6 (1.8) 64 (19.) 43 (13.1) 43 (13.1) See notes at end of table. 9

10 MAXIMUM ALLOWABLE PIPE LENGTH - ALTITUDE (BTUH) DIRECT VENT (2-PIPE) ONLY NON-DIRECT VENT (1-PIPE) ONLY NUMBER OF 90 ELBOWS TERMITION TYPE , (.1) 6 (19.8) 39 (11.9) 63 (19.2) 34 (.4) 62 (18.9) 33 (.1) 60 (18.3) 28 (6.) 9 (18.0) 60, (3.7) 3 7 (2.1) 48 (14.6) 46 (14.0) 41 (12.) 40 (12.2) 38 (11.6) 01 to 8000 (2134 to 2438) 80,000 0,000 2Pipeor3-in 3 (76) 3 (76) 3 (76) no 36 (11.0) 66 (.1) 2 (7.6) 63 (19.2) 31 (9.4) 6 (19.8) 17 (.2) 8 (17.7) 13 (4.0) 19 (.8) 63 (19.2) 8 (2.4) 3 7 (2.1) 14 (4.3) 62 (18.9) 7 (2.1) 48 (14.6) 12 (3.7) 60 (18.3) 43 (13.1) 9 (18.0) 38 (11.6) 1,000 3 (76) 4 (2) no 4 (2) no 46 (14.0) 61 (18.6) 6 (17.1) 43 (13.1) 1 (1.) 41 (12.) 46 (14.0) 40 (12.2) 41 (12.) 38 (11.6) 36 (11.0) 140,000 ALTITUDE (BTUH) DIRECT VENT (2-PIPE) ONLY NON-DIRECT VENT (1-PIPE) ONLY NUMBER OF 90 ELBOWS TERMITION TYPE , (14.0) 62 (18.9) 41 (12.) 60 (18.3) 36 (11.0) 8 (17.7) 31 (9.4) 6 (17.1) 29 (8.8) (16.8) 24 (7.3) 3 60, (3.4) 6 (1.8) 42 (12.8) 37 (11.3) 3 (.7) 34 (.4) 8001 to 9000 (2438 to 2743) 80, (.1) 62 (18.9) 28 (8.) 60 (18.3) 17 (.2) 8 (17.7) 12 (3.7) 6 (17.1) (16.8) 3 0,000 2Pipeor3-in 3 (76) 3 (76) 23 (7.0) 9 (18.0) 1 (4.6) 4 (16.) 7 (2.1) (1.) 39 (11.9) 34 (.4) 3 (76) no 1,000 3 (76) 4 (2) no 4 no 43 (13.1) 3 (.7) 41 (12.) 30 (9.1) 39 (11.9) 2 (7.6) 37 (11.3) 3 (.7) 1 (4.6) 34 (.4) 140,000 See notes at end of table.

11 MAXIMUM ALLOWABLE PIPE LENGTH - ALTITUDE 9001 to,000 (2743 to 3048) (BTUH) 40,000 60,000 80,000 0,000 1,000 DIRECT VENT (2-PIPE) ONLY TERMITION TYPE 2Pipeor3-in NON-DIRECT VENT (1-PIPE) ONLY 3 (76) 3 (76) 3 (76) 4 (2) no 4 (2) no 140,000 NUMBER OF 90 ELBOWS (12.8) 7 4 (13.7) 30 (9.1) 7 21 (6.4) 4 (16.) 39 (11.9) 37 (11.3) (16.8) 40 (12.2) 2 (7.6) (16.8) 13 (4.0) 37 (11.3) (1.) 32 (9.8) 3 38 (11.6) 14 (4.3) 3 (1.) 3 (.7) 27 (8.2) 1 (1.) 33 (.1) 9 (2.7) 1 (1.) 2 (7.6) 31 (9.4) 7 (2.1) 47 (14.3) 29 (8.8) 47 (14.3) 39 (11.9) 33 (.1) 34 (.4) 31 (9.4) 29 (8.8) 29 (8.8) * Disk usage-unless otherwise specified, use perforated assembly (factory-supplied in loose parts bag). # If one is stated, separate 2 halves of perforated assembly and use shouldered half. When using shouldered half, install screen side toward inlet box. Wide radius elbow. Vent sizing for Canadian installations over 400 ft. (1372 M) above sea level are subject to acceptance by the local authorities having jurisdiction. -Not Allowed; pressure switch will not make. 1. Do not use pipe size greater than those specified in table or incomplete combustion, flame disturbance, or flame sense lockout may occur. 2. Size both the combustion-air and vent pipe independently, then use the larger diameter for both pipes. 3. Assume two 4 elbows equal one 90 elbow. Wide radius elbows are desirable and may be required in some cases. 4. Elbows and pipe sections within the furnace casing and at the vent termination should not be included in vent length or elbow count.. The minimum pipe length is ft (1. M) for all applications. 6. Use 3-in. (76 mm) diameter vent termination kit for installations requiring 4-in (2 mm) diameter pipe. VENT LENGTH FOR OUTLET RESTRICTOR USAGE (60,000 BTU MODEL ONLY) } ALTITUDE ( ) ( )* ( ) ( ) ( ) ( ) ( ) ( ) ( ) *Canada 60,000 DIRECT VENT (2---PIPE). (IN / mm) NON --- DIRECT VENT (1---PIPE ONLY). (IN / mm) in. (1) in. (1) in. (1) in. (1) in. (1) in. (1) in. (1) in. (1) in. (1) in. (1) in. (1) in. (1) in. (1) in. (1) in. (1) in. (1) in. (1) in. (1) NO. OF 90_ ELBOWS (8.) 24 (7.3) 21 (6.4) 17 (.1) 14 (4.2) (3) 6 (1.8) (6) 17 (.1) 13 (3.9) (3) 6 (1.8) 1 (4.2) 12 (3.6) 8 (2.4) (1.) (3) 7 (2.1) }Discard outlet restrictor if vent lengths or elbows exceed the above table Discard restrictor if using 11/2---in. (38mm) diameter pipe. Refer to installation instructions for outlet restrictor installation guidelines. 11

12 MAXIMUM ALLOWABLE EXPOSED VENT PIPE LENGTH (FT/M) WITH AND WITHOUT INSULATION IN WINTER DESIGN TEMPERATURE AMBIENT* FURCE SIZE WINTER DESIGN TEMPERATURE F C) MAX PIPE DIAMETER IN (mm) WITHOUT INSULATION WITH 3/8 IN. ( mm) OR THICKER INSULATION (--- 7) 1. (38) 1 (16) (21) 0 ( ) 1. (38) 28 (9) (21) --- ( ) 1. (38) 16 () (21) (---7) 2 (1) 4 (14) (21) 0 ( ) 2 (1) 22 (7) (21) --- ( ) 2 (1) (3) 8 (18) (---7) 2 (1) 6 () (21) 0 ( ) 2 (1) 3 (11) (21) --- ( ) 2 (1) (6) (21) (---7) 2 (1) (17) (17) 0 ( ) 2 (1) 48 (1) (17) --- ( ) 2 (1) 30 (9) (17) (--- 7) 2. (64) (21) (21) 0 ( ) 2. (64) 47 (14) (21) --- ( ) 2. (64) 28 (9) (21) (--- 7) 2. (64) 40 (12) 40 (12) 0 ( ) 2. (64) 40 (12) 40 (12) --- ( ) 2. (64) 38 (12) 40 (12) (---7) 3 (76) (21) (21) 0 ( ) 3 (76) 0 (1) (21) --- ( ) 3 (76) 28 (9) (21) (---7) 3 (76) (21) (21) 0 ( ) 3 (76) 61 (19) (21) --- ( ) 3 (76) 37 (11) (21) (--- 7) 4 (2) (21) (21) 0 ( ) 4 (2) 48 (1) (21) --- ( ) 4 (2) 23 (7) (21) (---7) 3 (76) 60 (18) 60 (18) 0 ( ) 3 (76) 60 (18) 60 (18) --- ( ) 3 (76) (13) 60 (18) (--- 7) 4 (2) (21) (21) 0 ( ) 4 (2) 7 (17) (21) --- ( ) 4 (2) 30 (9) (21) * Pipe length (Ft. / M) specified for maximum pipe lengths located in unconditioned spaces. Pipes located in unconditioned space cannot exceed total allowable pipe length as specified in the Maximum Allowable Pipe Length chart. Insulation thickness based on R value of 3. per in. 12

13 CONDENSATE TRAP BLOWER SHELF CONDENSATE TRAP (INSIDE) FURCE DOOR CONDENSATE TRAP FURCE SIDE FURCE DOOR FURCE SIDE mm 4 2 mm mm mm 4 ALTERTE DRAIN TUBE LOCATION CONDENSATE TRAP DRAIN TUBE LOCATION UPFLOW APPLICATIONS FIELD DRAIN CONN mm FIELD mm 38 mm DRAIN CONN mm SIDE VIEW FRONT VIEW END VIEW FRONT VIEW DOWNFLOW AND ALTERTE EXTERL UPFLOW APPLICATIONS HORIZONTAL APPLICATIONS 19 mm 3 4 SLOT FOR SCREW HORIZONTAL APPLICATION (OPTIOL) mm WIRE TIE GUIDES (WHEN USED) mm mm mm mm 1 /4 OD COLLECTOR BOX TO TRAP RELIEF PORT 1 /2 OD INDUCER HOUSING DRAIN CONNECTION /8 OD COLLECTOR BOX DRAIN CONNECTION SCREW HOLE FOR UPFLOW OR DOWN- FLOW APPLICATIONS (OPTIOL) 1 /2-IN. PVC OR CPVC FRONT VIEW SIDE VIEW A

14 CONCENTRIC VENT FOR DIRECT VENT (2 -PIPE) APPLICATION (ALL MODEL SIZES) B IN. (MM) DIA PVC VENT/EXHAUST F COMBUSTION -AIR PIPE FOR NON -DIRECT VENT (1 -PIPE) APPLICATION (SIZES 040 THRU 1 ONLY) FIELD-SUPPLIED 2-IN. (1 mm) DIA. PVC 90 ELBOW FIELD-SUPPLIED 2-IN. (1 mm) DIA. PVC PIPE E 1 3 /16 (30 mm) C IN. (MM) DIA A 11/2 (38 mm) D A B IN. (MM) DIA PVC INTAKE/COMBUSTION AIR A971 PART NO. A* B C D{ E F KGAVT01CVT /8 (848) KGAVT0801CVT /8 (987) 2 (1) 3 (76) /2 (89) /2 (114) 16---/8 (422) /8 (37) /4 (19) /8 (187) --- 3/4 (146) /2 (16) * Dimension A will change accordingly as dimension D is lengthened or shortened. {Dimension D may be lengthened to 60 in. (124 mm) maximum. Dimension D may also be shortened by cutting the pipes provided in the kit to 12 in. (30 mm) minimum. NOTE: See furnace Installation Instructions when venting multiple furnaces near each other. COMBUSTION-AIR DISC (FACTORY-SUPPLIED IN LOOSE PARTS BAG) CASING WIDTH IN (mm) /2 () 21 (33) /2 (622) A IN (mm) 8-1/2 ± 1/2 (216 ± 13) -1/2 ± 1/2 (267 ± 13) 12 ± 1/2 (30 ± 13) A96211 SIDE FILTER RACK 1 1 / 4 (TYP) (32 mm) 3 / 1 8 ( mm) / 2 TABS (13 mm) 2 3 / 8 (60 mm) 1 1 / 4 (32 mm) 2 1 / 8 (638 mm) 3 / 4 (19 mm) 17 1 / / 8 (87 mm) 16 1 / 8 (4 mm) (43 mm) OPENING 14 1 /2 (368 mm) OPENING A

15 ACCESSORY DOWNFLOW SUBBASE LOCATING TAB 1 1 / 4-in. ( mm) TYP B PLENUM OPENING D A LOCATING TAB FACTORY-SUPPLIED FIELD-INSTALLED INSULATION C Disassembled A887 Assembled A97427 FURCE CASING WIDTH IN (mm) FURCE IN DOWNFLOW APPLICATION PLENUM OPENING* IN (MM) A FLOOR OPENING IN (MM) B C D HOLE NO. FOR WIDTH ADJUSTMENT /2 ( mm) 21 (33 mm) /2 (622 mm) Furnace with or without Cased Coil Assembly or Coil Box Furnace with or without Cased Coil Assembly or Coil Box Furnace with or without Cased Coil Assembly or Coil Box 1---1/8 (384 mm) 18---/8 (473 mm) /8 (62 mm) 19 (483 mm) 19 (483 mm) 19 (483 mm) /4 (426 mm) ---1/4 (14 mm) /4 (603 mm) *The plenum should be constructed 1/4 in. (6 mm) smaller in width and depth than the plenum dimensions shown above. ---3/8 (18 mm) ---3/8 (18 mm) ---3/8 (18 mm)

16 AIR DELIVERY -CFM (WITH FILTER)* RETURN-AIR SUPPLY 1 side or 1 side or 1 side or 1 side or 1 side or 1 side or 1 side or 1 side or both sides or 1 side and 1 side or 1 side or both sides or 1 side and only both sides or 1 side and 1 side only only both sides or 1 side and 1 side only SPEED Med- Med- Med- Med- Med- Med- Med- Med- Med- Med- Med- Med- Med- Med- Med- Med- EXTERL STATIC PRESSURE (In. wc) * A filter is required for each return-air supply. For horizontal and downflow applications, use 1 side or or only as airflow reference

17 TYPICAL INSTALLATIONS OUTDOOR UNIT COMBUSTION AIR PIPE (DIRECT VENT/2-PIPE APPLICATION) A/C COIL VENT PIPE HUMIDIFIER COMBUSTION AIR INLET (NON-DIRECT 1-PIPE APPLICATION) ELECTRONIC AIR CLEANER GAS-FIRED WATER HEATER AIRFLOW FRONT OF FURCE Basement - Upflow Application A0064 ELECTRONIC AIR CLEANER VENT COMBUSTION AIR INLET (NON-DIRECT VENT/ 1-PIPE APPLICATION HUMIDIFIER COMBUSTION AIR (DIRECT VENT/ 2 PIPE APPLICATION OUTDOOR UNIT A/C COIL FRONT OF FURCE Closet- Downflow Application AIRFLOW A006 17

18 TYPICAL INSTALLATIONS (CONTINUED) COMBUSTION-AIR INLET (NON-DIRECT VENT/1-PIPE APPLICATION) VENT PIPE COMBUSTION AIR PIPE DIRECT VENT/2-PIPE APPLICATION) ELECTRONIC AIR CLEANER FRONT OF FURCE FURCE CONDENSATE DRAIN AIRFLOW REFRIGERATION PIPING AIR CONDITIONING COIL Attic - Horizontal Application A0066 COMBUSTION - AIR INLET (NON-DIRECT VENT/ 1-PIPE APPLICATION) COMBUSTION AIR PIPE (DIRECT VENT/2-PIPE APPLICATION) VENT PIPE REFRIGERATION PIPING AIR CONDITIONING COIL AIRFLOW FURCE CONDENSATE DRAIN FRONT OF FURCE ELECTRONIC AIR CLEANER Crawlspace - Horizontal Application A

19 GUIDE SPECIFICATIONS GENERAL System Description Furnish a (4 -way multipoise) fixed capacity gas-fired condensing furnace for use with natural gas or propane (factory authorized conversion kit required for propane); furnish cold air return plenum; furnish side (external) filter rack. Quality Assurance Unit will be designed, tested and constructed to the current ANSI Z21.47/CSA 2.3 design standard for gas -fired central furnaces. Unit will be 3rd party certified by CSA to the current ANSI Z21.47/CSA 2.3 design standard for gas -fired central furnaces. Unit will carry the CSA Blue StarR and Blue FlameR labels. Unit efficiency testing will be performed per the current DOE test procedure as listed in the Federal Register. Unit will be certified for capacity and efficiency and listed in the latest AHRI Consumer s Directory of Certified Efficiency Ratings. Unit will carry the current Federal Trade Commission Energy Guide efficiency label. Delivery, Storage, and Handling Unit will be shipped as single package only and is stored and handled per unit manufacturer s recommendations. Warranty (for inclusion by specifying engineer) U.S. and Canada only. Warranty certificate available upon request. PRODUCTS Equipment Components shall include: slow -opening gas valve to reduce ignition noise, regulate gas flow, with electric switch gas shut -off; flame proving sensor, hot surface igniter, pressure switch assembly verifies inducer operation; flame rollout switch, drain tubing and installed condensate drain trap, blower and inducer assembly, 40va transformer; low -voltage (heating) (heating/ cooling) thermostat. Blower Wheel and Blower Motor Galvanized blower wheel shall be centrifugal type, statically and dynamically balanced. Blower motor of PSC type shall be permanently lubricated with sealed bearings, of hp, and shall be multiple -speed direct drive. Blower motor shall be soft mounted to the blower scroll to reduce vibration transmission. Filters Furnace shall have reusable -type filters. Filter shall be in. (mm) x in. (mm). Casing Casing shall be of.030 in. (.76 mm) thickness minimum, pre -painted galvanized steel. Inducer Motor Inducer motor shall be soft mounted to reduce vibration transmission. Primary Heat Exchangers Primary Heat exchangers shall be 3 -Pass gauge corrosion resistant aluminized steel of fold -and -crimp sectional design, which operates under negative pressure. Secondary Heat Exchangers Secondary Heat exchangers shall be of a flow -through design having a patented interior laminate coating of polypropylene for greater corrosion resistance with fold -and -crimp design, which operates under negative pressure. Controls Controls shall include a microprocessor based integrated electronic control board with at least 11 service troubleshooting codes displayed via diagnostic flashing LED light on the control, has ability to store fault codes, when activated a self -test feature checks all major functions of the furnace within one minute, and a replaceable automotive -type circuit protection fuse. Multiple operational settings available including separate blower speeds. Cooling airflow will be selectable between 30 or 400 CFM per ton of air conditioning. Operating Characteristics Heating Capacity shall be Btuh input; Btuh output capacity. Fuel Gas Efficiency shall be 92% AFUE. Air delivery shall be cfm minimum at 0.0 in. wg. external static pressure. Dimensions shall be: depth in. (mm); width in. (mm); height in. (mm) (casing only). Height shall be in. (mm) with A/C coil and in. (mm) overall with plenum. Electrical Requirements Electrical supply shall be 11 volts, 60 Hz, single-phase (nominal). Minimum wire size shall be AWG; maximum fuse size or HACR -type, designated circuit breaker shall be Amps. Special Features Refer to section of the product data sheet identifying accessories and descriptions for specific features and available enhancements. 19

20 E Bryant Heating & Cooling Systems D 73 W. Morris St. D Indianapolis, IN Printed in U.S.A. Edition Date: 11/ Catalog No. PDS340A.40.8 Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations. Replaces: PDS340A.40.7