ML-130 Parts Manual 1997 thru 2000

Transcription

1 ML-130 Parts Manual 1997 thru 2000 American Dryer Corporation 88 Currant Road Fall River, MA Telephone: (508) / Fax: (508) techsupport@amdry.com DMG/abe ADC Part No

2 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual included with the dryer. The following FOR YOUR SAFETY caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. POUR VOTRE SÉCURITÉ Ne pas entreposer ni utiliser d essence ni d autres vapeurs ou liquides inflammables dans le voisinage de cet appareil ou de yout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE DISTRIBUTORS NAME Serial Number(s) MODEL NO. ML-130 Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) or telephone your orders directly to the ADC Parts Department at (508) Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. IMPORTANT NOTE TO PURCHASER Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

3 Table of Contents Control Door Assembly... 3 Microprocessor Control Panel Assembly... 4, 5 Front Panel/Main Door Assemblies for models mfd. as of October 24, , 7 Front Panel/Main Door Assemblies for models mfd. prior to October 24, Main Door Switch Assembly for models mfd. as of October 24, Main Door Switch Assembly for models mfd. as of October 24, Drop Lint Drawer Assembly Lint Drawer/Lint Drawer Switch Box Assemblies Temperature Sensor Bracket Assembly Basket (Tumbler)/Support Assemblies... 14, 15 Tumbler Bearing Mount Assembly... 16, 17 Idler Bearing Mount Assembly... 18, 19 Totally Enclosed, Fan-Cooled (T.E.F.C.) Basket/Tumbler Motor Mount Assembly... 20, 21 Impellor/Fan Shaft Assembly... 22, 23 Blower Motor Mount Assembly for Gas Models ONLY... 24, 25 Blower Motor Mount Assembly for Electric Models ONLY... 26, 27 Blower Motor Mount Assembly for Steam Models ONLY Sail Switch Assembly Hot Surface Ignition (HSI) Gas Burner Assembly... 30, 31 Hot Surface Ignition (HSI) Liquid Propane (L.P.) Gas Burner Assembly... 32, 33 Electric Oven Assembly... 34, 35 Electric Oven Relay Box Assembly for VAC - 3ø - 50/60 Hz Models ONLY Electric Oven Relay Box Assembly for /480 VAC - 3ø - 50/60 Hz Models ONLY Steam Damper Assembly... 38, 39 Reversing Relay Panel Assembly for Gas and Steam Models ONLY for /240 Volt Models ONLY... 40, 41 Reversing Relay Panel Assembly for Gas and Steam Models ONLY for 380/416Volt Models ONLY... 42, 43 Reversing Relay Panel Assembly for Gas and Steam Models ONLY for 460/480 Volt Models ONLY... 44, 45

4 Reversing Relay Panel Assembly for Electric Models ONLY... 46, 47 Back Guard Assemblies... 48, 49 Electric Oven Component Application Listing Electric Oven Power Distribution 72 Kw VAC - 3ø - 50/60 Hz Electric Oven Power Distribution 72 Kw /480 VAC - 3ø - 50/60 Hz Electric Oven Power Distribution 80 Kw VAC - 3ø - 50/60 Hz Electric Oven Power Distribution 80 Kw /480 VAC - 3ø - 50/60 Hz Electric Oven Wiring 72/80 Kw VAC - 3ø - 50/60 Hz Electric Oven Power Distribution 72/80 Kw /480 VAC - 3ø - 50/60 Hz Additional Parts Available... 57

5 Control Door Assembly 3 Illus. No. Part No. Qty. Description White Control Door Assembly ONLY Blue Control Door Assembly ONLY Logo/Label ONLY Spring Turn Latch (2-piece) Noise Suppressor Tape (sold by the foot) #10-16 x 1/2 Hex Head TEK Crimptite Screw Control Door Rod Catch Control Door Retainer Clip Control Door Support Rod Telephone: (508) Fax: (508)

6 4 Microprocessor Control Panel Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

7 Microprocessor Control Panel Assembly 5 Illus. No. Part No. Qty. Description Phase 6 OPL Keypad OPL Stick-on Labels (English Only)... Not Illustrated OPL Stick-on Labels (Spanish, Italian, and Hebrew)... Not Illustrated Language OPL Stick-on Labels (English, Spanish, and Hebrew)... Not Illustrated Language OPL Stick-on Labels (Italian, Dutch, French, German, and Chinese)... Not Illustrated Phase 6 Microprocessor (computer) Panel Assembly Phase 6 Reversing Microprocessor Controller (computer) #6-32 x 3/4 Phillips Round Head Machine Screw #6 Star Washer #6-32 x 3/4 Phillips Round Head Machine Screw #6-32 x 3/4 Phillips Round Head Machine Screw /8-Amp Fuse Amp (Fast Acting) Fuse Amp (Fast Acting) Fuse Telephone: (508) Fax: (508)

8 6 Front Panel/Main Door Assemblies for models mfd. as of October 24, 1997 American Dryer Corporation 88 Currant Road / Fall River, MA

9 Front Panel/Main Door Assemblies for models mfd. as of October 24, Illus. No. Part No. Qty. Description White Front Panel Assembly (includes illus. nos. 1, 15, and 16) Blue Front Panel Assembly (includes illus. nos. 1, 15, and 16) /8 Door Glass Door Glass Adhesive (10.3 oz. cartridge) ft Main Door Gasket White Main Door Assembly Complete (includes illus. nos. 2 through 10) Blue Main Door Assembly Complete (includes illus. nos. 2 through 10) White Main Door Ring Blue Main Door Ring /4-20 Free Spin Wash Nut (White) /4-20 Free Spin Wash Nut (Blue) /4-20 x 5/8 (White) Carriage Bolt /4-20 x 5/8 (Blue) Carriage Bolt White Main Door Handle Blue Main Door Handle White Main Door Hinge Blue Main Door Hinge Main Door Latch Screw (#10-32 Dome Hex Head Screw) #10-32 Acorn Nut EMERGENCY STOP Push-Pull Button EMERGENCY STOP Nameplate Normally Closed (N.C.) Contact Block Normally Closed (N.C.) Contact Block with Base Friction Door Latch /32 Pop Rivet Telephone: (508) Fax: (508)

10 8 Front Panel/Main Door Assemblies for models mfd. prior to October 24, 1997 Illus. No. Part No. Qty. Description White Main Door Handle Blue Main Door Handle /16-18 Acorn Nut White Front Panel/Main Door Assembly (includes illus. nos. 1 through 7) White Main Door ONLY Blue Front Panel/Main Door Assembly (includes illus. nos. 1 through 7) Blue Main Door ONLY) /16-18 Acorn Nut /16 Door Glass Door Glass Adhesive (10.3 oz. cartridge) Door Magnet (5/16 x 1/4 x 34-3/4 ) Main Door Gasket (13-1/6 x 1-3/8 x 97-1/2 ) White Front Panel ONLY for EMERGENCY STOP Blue Front Panel ONLY for EMERGENCY STOP EMERGENCY STOP Push-Pull Button EMERGENCY STOP Nameplate Normally Closed (N.C.) Contact Block Normally Closed (N.C.) Contact Block with Base American Dryer Corporation 88 Currant Road / Fall River, MA

11 Main Door Switch for models mfd. as of October 24, Illus. No. Part No. Qty. Description #6-32 x 7/8 Phillips Pan Head Machine Screw #6-32 Hex Nut #6 Star Washer Single Pole Door Switch #8-18 x 7/16" Phillips Pan Head TEK Screw White Main Door Switch Housing ONLY Blue Main Door Switch Housing ONLY White Main Door Switch with Housing Assembly (includes illus. nos. 1 through 4 and 6) Blue Main Door Switch with Housing Assembly (includes illus. nos. 1 through 4 and 6) #8-18 x 7/16" Phillips Pan Head TEK Screw White Bottom Hinge Block Blue Bottom Hinge Block White Top Hinge Block Blue Top Hinge Block Nylon Washer Telephone: (508) Fax: (508)

12 10 Main Door Switch for models mfd. prior to October 24, 1997 Illus. No. Part No. Qty. Description #6-32 x 7/8 Phillips Pan Head Machine Screw #6-32 Hex Nut #6 Star Washer Single Pole Door Switch #8-18 x 7/16" Phillips Pan Head TEK Screw White Main Door Switch Housing ONLY Blue Main Door Switch Housing ONLY White Main Door Switch with Housing Assembly (includes illus. nos. 1 through 4 and 6) Blue Main Door Switch with Housing Assembly (includes illus. nos. 1 through 4 and 6) #8-18 x 7/16" Phillips Pan Head TEK Screw White Bottom Hinge Block Blue Bottom Hinge Block White Top Hinge Block Blue Top Hinge Block Nylon Washer American Dryer Corporation 88 Currant Road / Fall River, MA

13 Drop Lint Door Assembly 11 Illus. No. Part No. Qty. Description White Drop Lint Drawer Assembly (includes illus. nos. 1, 2, and 4) Blue Drop Lint Drawer Assembly (includes illus. nos. 1, 2, and 4) Neoprene Sponge Tape (sold by the foot) #10-16 x 1/2" Hex Head TEK Crimptite Screw Neoprene Sponge Tape (sold by the foot) Telephone: (508) Fax: (508)

14 12 Lint Drawer/Lint Drawer Switch Box Assemblies Illus. No. Part No. Qty. Description White Lint Drawer Assembly with Safety Switch Actuator Blue Drawer Assembly with Safety Switch Actuator Lint Screen Assembly ONLY #6-32 x 3/4" Clinch Stud Lint Drawer Switch ONLY #6 Star Washer #6-32 Hex Nut Pin Socket Connector ONLY Socket Terminal ONLY Pin/Extraction Tool Lint Drawer Switch Assembly Complete (includes illus. nos. 3 and 9) Lint Drawer Switch Mounting Bracket Assembly ONLY #10-16 x 1/2" Hex Head TEK Crimptite Screw American Dryer Corporation 88 Currant Road / Fall River, MA

15 Temperature Sensor Bracket Assembly 13 Illus. No. Part No. Qty. Description Temperature Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Temperature Sensor Bracket ONLY /4" Tinnerman Push-on Fastener /4" Temperature Sensor Probe Assembly (includes illus. nos. 2, 3, 8, 9, and 10) #6-32 Hex Nut #6 Star Washer Large Automatic Reset Thermostat ONLY #6-32 x 1/4" Round Head Machine Screw Insulated Terminal Pin Socket Connector ONLY Socket Terminal ONLY Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool #8-18 x 7/16" Phillips Pan Head Screw Telephone: (508) Fax: (508)

16 14 Basket (Tumbler)/Support Assemblies American Dryer Corporation 88 Currant Road / Fall River, MA

17 Basket (Tumbler)/Support Assemblies 15 Illus. No. Part No. Qty. Description * 1 Basket (Tumbler) ONLY without Felt Collar Basket (Tumbler) and Support Assembly Complete with Rotational Sensor Option (includes illus. nos. 1 through 12) Stainless Steel Basket and Support Assembly Complete (includes illus. nos. 1 through 12) #10-16 x 1/2" Hex Head TEK Crimptite Screw Basket (Tumbler) Rib ONLY /16-18 x 3/4" Socket Button Head Screw /2-13 x 44" Tie Rod Basket (Tumbler) Reinforcing Plate ONLY ** Basket (Tumbler) Shim ONLY Basket (Tumbler) Support ONLY with Rotational Sensor Option /2-13 Hex Nut /2" Lock Washer /16" Flat Washer Felt Collar ONLY #847 Adhesive for Felt Collar (5 oz. tube) Rotational Magnet Holder Assembly * Felt collar is not included and must be ordered separately. ** As required Telephone: (508) Fax: (508)

18 16 Tumbler Bearing Mount Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

19 Tumbler Bearing Mount Assembly 17 Illus. No. Part No. Qty. Description /4" SFX Bushing 2* AP-74 V-Belt B x 20" Basket (Tumbler) Pulley /8-11 x 3" Hex Head Machine Bolt /8" Flat Washer /4" Pillow Block Bearing ONLY /8" Flat Washer /8" Lock Washer /8-11 Hex Nut /8-16 x 1-1/2" Hex Head Machine Bolt /8-16 Hex Nut Tumbler Bearing Mount Assembly (includes illus. nos. 4 through 13) /4" Pillow Block Bearing ONLY /4-20 x 3" Tap Bolt /4-20 Hex Nut /8-16 Hex Nut /8" Lock Washer /8" Flat Washer /8-16 x 1-1/2" Hex Head Machine Bolt /8" Flat Washer /8" Retaining Ring /8" Hinge Pin /4" Retaining Ring /4" Flat Washer /4" Lock Washer /4-20 x 1/2" Hex Head Machine Bolt Rotational Sensor Assembly Rotational Sensor Mounting Bracket * Replace in matched sets (both belts). Telephone: (508) Fax: (508)

20 18 Idler Bearing Mount Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

21 Idler Bearing Mount Assembly 19 Illus. No. Part No. Qty. Description " Bushing A x 3.0 Pulley 3* AP-74 V-Belt " SK Bushing 5* V-710 Cogged Belt " Idler Pulley /4" x 1/4" x 4 5/8" Key " Idler Shaft ONLY " Pillow Block Bearing ONLY /8" Flat Washer /8-16 x 1 1/2" Hex Head Machine Bolt /4-20 x 1/2" Hex Head Machine Bolt /16-18 x 3" Hex head Machine Bolt /16" Flat Washer /16" Hex Nut /16" Lock Washer Idler Bearing Mount Assembly Complete (includes illus. nos. 8 through 11 and 17 through 25) Idler Bearing Mount ONLY " Pillow Block Bearing ONLY /8" Flat Washer /8" Lock Washer /8-16 Hex Nut Idler Adjustment Hinge ONLY /4" Lock Washer /4-20 Hex Nut * Replace in matched sets (both belts). Telephone: (508) Fax: (508)

22 20 Totally Enclosed, Fan-Cooled (T.E.F.C.) Basket/Tumbler Motor Mount Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

23 Totally Enclosed, Fan-Cooled (T.E.F.C.) Basket/Tumbler Motor Mount Assembly 21 Illus. No. Part No. Qty. Description /8" SK Bushing " Pulley (for 60 Hz Models Only) " Pulley (for 50 Hz Models Only) 3* V-710 Cogged Belt (for 60 Hz Models Only) AP-74 V-Belt (for 50 Hz Models Only) /8" x 90 Connector /16-18 x 3/4" Hex Head Machine Bolt /16" Flat Washer /4 HP 208/230/460v 3ø 50/60 Hz and 380v 3ø 50 Hz T.E.F.C. Motor (56Z Frame) /4 HP 380v 3ø 60 Hz T.E.F.C. Motor (56Z Frame) Basket (Tumbler) Motor Mount ONLY (56Z Frame) ** 1 3/4 HP 208/230/460v 3ø 60 Hz Basket Motor Mount Assembly Complete (includes illus. nos. 1, 2, 5, 7, 10, 11, 12, 15, and 16) ** 1 3/4 HP 208/230/380/460v 3ø 50 Hz Motor Mount Assembly Complete (includes illus. nos. 1, 2, 5, 7, 10, 11, 12, 15, and 16) /16-18 Hex Nut /16" Lock Washer /16" Flat Washer /16-18 Hex Nut /16" Lock Washer /16" Flat Washer /8-16 x 3" Hex Head Machine Bolt /8-16 Hex Nut * Replace in matched sets (both belts). ** Specify voltage when ordering. IMPORTANT: For voltages higher than 460 VAC, contact the factory for correct part number of motor mount assembly. Telephone: (508) Fax: (508)

24 22 Impellor/Fan Shaft Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

25 Impellor/Fan ShaftAssembly 23 Illus. No. Part No. Qty. Description SDS x 1-3/8" Bushing (for 60 Hz Models Only) SH x 1-3/8" Bushing (for 50 Hz Models Only) B x 4.8 Pulley (for 60 Hz Models Only) B x 4.0 Pulley (for 50 Hz Models Only) /16" x 5/16" x 1-3/8" Key Impellor (Fan/Blower) Shaft /8" Pillow Block Bearing with Set Screws and Grease Fitting /16 x 3/8" Allen Set Screw ONLY /4-28 N.P.T. Grease Fitting ONLY /8" Flat Washer /8" Lock Washer /8-16 x 1-1/2" Hex Head Machine Bolt Impellor/Fan Shaft Mount ONLY Impellor/Fan Assembly Complete (includes illus. nos. 1, 2, 3, 6, 7 through 10 and 15 through 18) For 60 Hz Models ONLY Impellor/Fan Assembly Complete (includes illus. nos. 1, 2, 3, 6, 7 through 10 and 15 through 18) For 50 Hz Models ONLY /8-16 Hex Nut /8" Lock Washer /8" Flat Washer " x 3" Fan (Impellor/Blower) Gasket Neoprene Sponge Tape (sold by the foot) " Impellor (Fan/Blower) with 3/4" Bore /16" x 3/16" x 1 7/8" Key Fan Washer /2-20 Left Hand Jam Nut Telephone: (508) Fax: (508)

26 24 Blower Motor Mount Assembly for Gas Models ONLY American Dryer Corporation 88 Currant Road / Fall River, MA

27 Blower Motor Mount Assembly for Gas Models ONLY 25 Illus. No. Part No. Qty. Description Adjustable Plate Assembly Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 9 and 11 through 13) For /460 volt - 60 Hz models ONLY For 380/416 volt - 50 Hz models ONLY /8-16 x 3-1/2" Hex Head Bolt /8-16 Hex Nut Adjustable Angle Assembly /16" Flat Washer /16" Lock Washer /16-18 x 3/4" Hex Head Machine Bolt /16-18 Hex Nut HP Blower Motor For /460 volt - 60 Hz models ONLY For 380/416 volt - 50 Hz models ONLY 10* L-350 V-Belt B x 5.4 Motor Pulley SDS x 1-1/8" Bore Bushing /16" x 5/16" x 1-3/8" Key * Replace in matched sets (both belts) Telephone: (508) Fax: (508)

28 26 Blower Motor Mount Assembly for Electric Models ONLY American Dryer Corporation 88 Currant Road / Fall River, MA

29 Blower Motor Mount Assembly for Electric Models ONLY 27 Illus. No. Part No. Qty. Description Adjustable Plate Assembly Kw Electric Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 9 and 11 through 13) For /460 volt - 60 Hz models ONLY For 380/416 volt - 50 Hz models ONLY Kw Electric Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 9 and 11 through 13) For /460 volt - 60 Hz models ONLY For 380/416 volt - 50 Hz models ONLY /8-16 x 3-1/2" Hex Head Bolt /8-16 Hex Nut Adjustable Angle Assembly /16" Flat Washer /16" Lock Washer /16-18 x 3/4" Hex Head Machine Bolt /16-18 Hex Nut HP Blower Motor For /460 volt - 60 Hz models ONLY For 380/416 volt - 50 Hz models ONLY 10* L-350 V-Belt (for 72 Kw Electric Oven Only) L-360 V-Belt (for 80 Kw Electric Oven Only) B x 5.4 Motor Pulley (for 72 Kw Electric Oven Only) B x 6.2 Motor Pulley (for 80 Kw Electric Oven Only) SDS x 1-1/8" Bore Bushing /16" x 5/16" x 1-3/8" Key * Replace in matched sets (both belts) Telephone: (508) Fax: (508)

30 28 Blower Motor Mount Assembly for Steam Models ONLY Illus. No. Part No. Qty. Description Adjustable Plate Assembly Blower Motor Mount Assembly Complete (includes illus. nos. 1 through 9 and 11 through 13) For /460 volt - 60 Hz models ONLY For 380/416 volt - 50 Hz models ONLY /8-16 x 3-1/2" Hex Head Bolt /8-16 Hex Nut Adjustable Angle Assembly /16" Flat Washer /16" Lock Washer /16-18 x 3/4" Hex Head Machine Bolt /16-18 Hex Nut HP Blower Motor For /460 volt - 60 Hz models ONLY For 380/416 volt - 50 Hz models ONLY 10* L-360 V-Belt B x 6.2 Motor Pulley SDS x 1-1/8" Bore Bushing /16" x 5/16" x 1-3/8" Key * Replace in matched sets (both belts) American Dryer Corporation 88 Currant Road / Fall River, MA

31 Sail Switch Assembly 29 Illus. No. Part No. Qty. Description Sail Switch Actuator Rod Sail Switch Damper (Flat) /8" Push-on Fastener Sail Switch Box Cover and Bracket ONLY Sail Switch Box Assembly Complete (includes illus. nos. 1 through 4 and 6 through 10) #10-16 x 1/2 Hex Head TEK Crimptite Screw #4 x 3/4" Pan Head "A" Machine Screw Sail Switch ONLY Sail Switch Box Cover and Bracket ONLY #10-16 x 1/2" Phillips Round Head Screw Twin Speed Nut Telephone: (508) Fax: (508)

32 30 Hot Surface Ignition (HSI) Natural Gas Burner Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

33 Hot Surface Ignition (HSI) Natural Gas Burner Assembly 31 Illus. No. Part No. Qty. Description to 3/4 Reducing Coupling Pipe Bracket #10-16 x 1/2 Hex Head TEK Crimptite Screw /4 x 20 Nipple /4 Union Shut-Off /4 Closed Nipple /4 Union /4 x 4 Nipple /4 x 90º Elbow /4 x 5-1/2 Nipple Pipe Bracket #10-16 x 1/2 Hex Head TEK Crimptite Screw /4 24 VAC Redundant (natural gas) Gas Valve #10-16 x 1/2 Hex Head TEK Crimptite Screw Pipe Bracket Port Manifold 17* #4 Burner Orifice (natural gas) ONLY #10-16 x 1/2 Hex Head TEK Crimptite Screw Burner Tube ONLY #10-16 x 1/2 Hex Head TEK Crimptite Screw Burner Tube Support ONLY #10-16 x 1/2 Hex Head TEK Crimptite Screw #10-16 x 1/2 Hex Head TEK Crimptite Screw Sail Switch (refer to Sail Switch Assembly on page 29) Burner Box Cover Plate ONLY #10-16 x 1/2 Hex Head TEK Crimptite Screw Hot Surface Ignition (HSI) Ignitor HSI Flame Sensor #6-32 x 1/2 Phillips Round Head Machine Screw #6-32 Pal Nut º Small Manual/Reset Thermostat ONLY (for models mfd. as of May 26, 1998) º Hi-Limit ONLY (for models mfd. prior to May 26, 1998) Hi-Limit Bracket * 1 HSI Natural Gas Burner Assembly Complete (includes illus. nos 1 through 36) For models mfd. with Natural Gas ONLY Burner Box ONLY Hot Surface Ignition (HSI) Module Mounting Bracket/Manifold Rest HSI (Hot Surface Ignition) Module II #10-16 x 1/2 Hex Head TEK Crimptite Screw * Consult factory for elevations over 2,000 feet. Telephone: (508) Fax: (508)

34 32 Hot Surface Ignition (HSI) Liquid Propane (L.P.) Gas Burner Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

35 Hot Surface Ignition (HSI) Liquid Propane (L.P.) Gas Burner Assembly 33 Illus. No. Part No. Qty. Description to 3/4 Reducing Coupling Pipe Bracket #10-16 x 1/2 Hex Head TEK Crimptite Screw /4 x 20 Nipple /4 Union Shut-Off /4 Closed Nipple /4 Union /4 x 4 Nipple /4 x 90º Elbow /4 x 5-1/2 Nipple Pipe Bracket #10-16 x 1/2 Hex Head TEK Crimptite Screw /4 24 VAC Redundant (natural gas) Gas Valve VAC Gas Valve L.P. (liquid propane) Conversion Kit #10-16 x 1/2 Hex Head TEK Crimptite Screw Pipe Bracket Port Manifold 17* #30 Burner Orifice (liquid propane gas) ONLY #10-16 x 1/2 Hex Head TEK Crimptite Screw Burner Tube ONLY #10-16 x 1/2 Hex Head TEK Crimptite Screw Burner Tube Support ONLY #10-16 x 1/2 Hex Head TEK Crimptite Screw #10-16 x 1/2 Hex Head TEK Crimptite Screw Sail Switch (refer to Sail Switch Assembly on page 29) Burner Box Cover Plate ONLY #10-16 x 1/2 Hex Head TEK Crimptite Screw Hot Surface Ignition (HSI) Ignitor HSI Flame Sensor #6-32 x 1/2 Phillips Round Head Machine Screw #6-32 Pal Nut º Small Manual/Reset Thermostat ONLY (for models mfd. as of May 26, 1998) º Hi-Limit ONLY (for models mfd. prior to May 26, 1998) Hi-Limit Bracket * 1 HSI Liquid Propane (L.P.) Gas Burner Assembly Complete (includes illus. nos 1 through 36) For models mfd. with Natural Gas ONLY Burner Box ONLY Hot Surface Ignition (HSI) Module Mounting Bracket/Manifold Rest HSI (Hot Surface Ignition) Module II #10-16 x 1/2 Hex Head TEK Crimptite Screw L.P. Burner Baffle * Consult factory for elevations over 2,000 feet. Telephone: (508) Fax: (508)

36 34 Electric Oven Assembly ELECTRIC OVEN (FRONT VIEW) ELECTRIC OVEN (REAR VIEW) American Dryer Corporation 88 Currant Road / Fall River, MA

37 Electric Oven Assembly 35 Illus. No. Part No. Qty. Description Electric Oven Box ONLY * 1 Electric Oven Assembly Complete * 18 Electric Element Safety Control Bracket ONLY #8-18 x 7/16" Phillips Pan Head TEK Screw Hi-Limit ONLY #10-16 x 1/2" Hex Head TEK Crimptite Screw Sail Switch Box with Cover and Bracket ONLY Sail Switch Box Assembly Complete (includes illus. nos. 7 through 15) Twin Speed Nut #10-16 x 1/2" Hex Head TEK Crimptite Screw Sail Switch Box with Cover and Bracket ONLY Sail Switch ONLY #4 x 3/4" Pan Head "A" Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) /8" Push-On Fastener #10-16 x 1/2" Hex Head TEK Crimptite Screw Electric Element Cover ONLY Internal Ceramic Insulator External Ceramic Insulator #10-32 Hex Nut * --- Bus Bar (sold by the foot) * --- Terminal Lug #10 Star Washer #10-32 Hex Nut #10-16 x 1/2" Hex Head TEK Crimptite Screw Enclosure Access Cover ONLY * - Oven Wire (sold by the foot) * Refer to Electric Oven Component Application Charts on page 50. Telephone: (508) Fax: (508)

38 36 Electric Oven Relay Box Assembly for VAC - 3ø - 50/60 Hz Models ONLY Illus. No. Part No. Qty. Description Electric Oven Relay Box Cover #8-18 x 7/16" Phillips Pan Head TEK Screw Power Distribution Block #8-32 Pal Nut Universal Bushing Transformer (for ALL Microprocessor [computer] Models) #8-32 x 1/2" Pan Head Machine Screw L-70 Terminal Lug #8-32 Pal Nut #8-32 x 1/2" Pan Head Machine Screw TSPT 112-Amp - 24 VAC Relay #8-32 Pal Nut /4-20 x 2" Carriage Bolt Power Distribution Block /4-20 Free Spin Wash Nut American Dryer Corporation 88 Currant Road / Fall River, MA

39 Electric Oven Relay Box Assembly 37 for /480 VAC - 3ø - 50/60 Hz Models ONLY Illus. No. Part No. Qty. Description Electric Oven Relay Box Cover #8-18 x 7/16" Phillips Pan Head TEK Screw #10 x 1/2" Hex Washer TEK Screw Transformer (for ALL Electric Models VAC thru 480 VAC) Universal Bushing #8-32 x 1/2" Pan Head Machine Screw L-70 Terminal Lug #8-32 Pal Nut #8-32 Pal Nut /4-20 Free Spin Wash Nut #8-32 x 1/2" Pan Head Machine Screw TSPT 112-Amp - 24 VAC Relay Power Distribution Block /4-20 x 2" Carriage Bolt Telephone: (508) Fax: (508)

40 38 Steam Damper Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

41 Steam Damper Assembly 39 Illus. No. Part No. Qty. Description Steam Coil Assembly Steel Steam Coil Assembly (Option) /16" Lock Washer /16-18 Hex Nut /4-20 Hex Nut /4" Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) /4" Lock Washer /4"-20 Hex Nut Steam Damper Gasket (sold by the inch) Gasket (68-1/2" length) /16-20 Stainless Steel Acorn Nut /16-20 Hex Nut /4" Bore x 3" Stroke Piston Piston Support Bracket /4-20 Hex Nut /4" Lock Washer /4" x 1/8" Connector /4" Tubing (sold in feet) /4" x 1/8" Connector /8" Needle Valve /8" Close Nipple Way Micro Valve - 24 VAC #6-32 x 1" Round Head Machine Screw #6 Star Washer #6-32 Hex Nut Micro Valve Support Bracket /4-20 Hex Nut /4" Lock Washer /8" N.P.T. Silencer (muffler) Telephone: (508) Fax: (508)

42 40 Reversing Relay Panel Assembly for Gas and Steam Models ONLY for /240 Volt Models ONLY American Dryer Corporation 88 Currant Road / Fall River, MA

43 Reversing Relay Panel Assembly for Gas and Steam Models ONLY for /240 Volt Models ONLY 41 Illus. No. Part No. Qty. Description Amp Blower Overload HP Impellor (Blower/Fan) Contactor #8-32 Pal Nut #6-32 x 1-1/4" Slotted Round Head Machine Screw Position Power Distribution Block Reversing (Impellor/Blower/Fan) Contactor - 24 VAC /240 Volt Transformer ONLY (for Gas Models Only) /240 Volt Transformer ONLY (for Steam Models Only) ML Transformer Termination Kit Arc Suppressor (A.S.) Board Nylon Standoff /16-18 Hex Nut L-125 Ground Lug /16" Lock Washer Fuse Block/Strip Holder ONLY /2-Amp (Slo Blo) Fuse Reversing Relay Panel Assembly Complete (includes illus. nos. 1 through 22) For Gas Models ONLY Reversing Relay Panel Assembly Complete (includes illus. nos. 1 through 22) For Steam Models ONLY Relay Mounting Panel ONLY #8-18 x 7/16" Phillips Pan Head TEK Screw #6-32 Pal Nut End Stop /Bracket #8-32 x 1/2" Pan Head Machine Screw #10 x 1/2" Hex Washer TEK Screw - Green L-70 Ground Lug Din Mounting Rail (sold by the inch) Phase 6 Microprocessor Reversing Relay Panel Wiring (for Gas Models Only) Phase 6 Microprocessor Reversing Relay Panel Wiring (for Steam Models Only) Phase 6 Microprocessor Reversing Relay Panel ASB Wiring Telephone: (508) Fax: (508)

44 42 Reversing Relay Panel Assembly for Gas and Steam Models ONLY for 380/416 Volt Models ONLY American Dryer Corporation 88 Currant Road / Fall River, MA

45 Reversing Relay Panel Assembly for Gas and Steam Models ONLY for 380/416 Volt Models ONLY 43 Illus. No. Part No. Qty. Description Amp Blower Overload HP Impellor (Blower/Fan) Contactor #8-32 Pal Nut #6-32 x 1-1/4" Slotted Round Head Machine Screw Position Power Distribution Block Reversing (Impellor/Blower/Fan) Contactor - 24 VAC /416 Volt Transformer ONLY ML Transformer Termination Kit Arc Suppressor (A.S.) Board Nylon Standoff /16-18 Hex Nut L-125 Ground Lug /16" Lock Washer Fuse Block/Strip Holder ONLY /2-Amp (Slo Blo) Fuse Reversing Relay Panel Assembly Complete (includes illus. nos. 1 through 22) For Gas Models ONLY Reversing Relay Panel Assembly Complete (includes illus. nos. 1 through 22) For Steam Models ONLY Relay Mounting Panel ONLY #8-18 x 7/16" Phillips Pan Head TEK Screw #6-32 Pal Nut End Stop /Bracket #8-32 x 1/2" Pan Head Machine Screw #10 x 1/2" Hex Washer TEK Screw - Green L-70 Ground Lug Din Mounting Rail (sold by the inch) Phase 6 Microprocessor Reversing Relay Panel Wiring (for Gas Models Only) Phase 6 Microprocessor Reversing Relay Panel Wiring (for Steam Models Only) Phase 6 Microprocessor Reversing Relay Panel ASB Wiring Telephone: (508) Fax: (508)

46 44 Reversing Relay Panel Assembly for Gas and Steam Models ONLY for 460/480 Volt Models ONLY American Dryer Corporation 88 Currant Road / Fall River, MA

47 Reversing Relay Panel Assembly for Gas and Steam Models ONLY for 460/480 Volt Models ONLY 45 Illus. No. Part No. Qty. Description Amp Blower Overload HP Impellor (Blower/Fan) Contactor #8-32 Pal Nut #6-32 x 1-1/4" Slotted Round Head Machine Screw Position Power Distribution Block Reversing (Impellor/Blower/Fan) Contactor - 24 VAC /480 Volt Transformer ONLY ML Transformer Termination Kit Arc Suppressor (A.S.) Board Nylon Standoff /16-18 Hex Nut L-125 Ground Lug /16" Lock Washer Double Pole Circuit Breaker Din Mounting Rail (sold by the inch) Reversing Relay Panel Assembly Complete (includes illus. nos. 1 through 22) For Gas Models ONLY Reversing Relay Panel Assembly Complete (includes illus. nos. 1 through 22) For Steam Models ONLY Relay Mounting Panel ONLY #8-18 x 7/16" Phillips Pan Head TEK Screw #6-32 Pal Nut End Stop /Bracket #8-32 x 1/2" Pan Head Machine Screw #10 x 1/2" Hex Washer TEK Screw - Green L-70 Ground Lug Phase 6 Microprocessor Reversing Relay Panel Wiring (for Gas Models Only) Phase 6 Microprocessor Reversing Relay Panel Wiring (for Steam Models Only) Phase 6 Microprocessor Reversing Relay Panel ASB Wiring Telephone: (508) Fax: (508)

48 46 Reversing Relay Panel Assembly for Electric Models ONLY American Dryer Corporation 88 Currant Road / Fall River, MA

49 Reversing Relay Panel Assembly for Electric Models ONLY 47 Illus. No. Part No. Qty. Description Amp Blower Overload HP Impellor (Blower/Fan) Contactor #8-32 Pal Nut #6-32 x 1-1/4" Slotted Round Head Machine Screw Position Power Distribution Block Reversing (Impellor/Blower/Fan) Contactor - 24 VAC /480 Volt Transformer ONLY M/L Transformer Termination Kit Arc uppressor (A.S.) Board Nylon Standoff /16-18 Hex Nut L-125 Ground Lug /16" Lock Washer Double Pole Circuit Breaker Din Mounting Rail (sold by the inch) Reversing Relay Panel Assembly Complete (includes illus. nos. 1 through 22) Relay Mounting Panel ONLY Phase 6 Microprocessor Reversing Relay Panel Wiring Phase 6 Microprocessor Reversing Relay Panel ASB Wiring Telephone: (508) Fax: (508)

50 48 Back Guard Assemblies American Dryer Corporation 88 Currant Road / Fall River, MA

51 Back Guard Assemblies 49 Illus. No. Part No. Qty. Description Lower Back Guard (for Gas Models and Electric Models) Lower Back Guard (for Steam Models Only) #8-18 x 7/16" Phillips Pan Head TEK Screw "Important for Computer Ground" Label Top Back Guard "DANGER - Hot" Label "DANGER - High Voltage" Label "WARNING - Fire Hazards" Label "Phase 6 OPL Programming Location" Label "Phase 6 'A - B' Factor" Label "Clean Lint Screen" Label "Installation Instructions" Label "ADC Name, Address, Phone #" Label "CAUTION - Rotating Parts" Label "Routine Maintenance Schedule" Label "WARNING - Fumes" Label "CAUTION - Exhaust/Lint Screen" Label Telephone: (508) Fax: (508)

52 50 Electric Oven Component Application Listing 80 Kw Oven 72 Kw Oven American Dryer Corporation 88 Currant Road / Fall River, MA

53 Electric Oven Power Distribution Kw VAC - 3ø - 50/60 Hz MLE-130 (72KW) ELECTRIC OVEN POWER DISTRIBUTION (72 Kw VAC - 3ø - 50/60 Hz) Telephone: (508) Fax: (508)

54 52 Electric Oven Power Distribution 72 Kw /480 VAC - 3ø - 50/60 Hz MLE-130 (72KW) ELECTRIC OVEN POWER DISTRIBUTION (72 Kw /480 VAC - 3ø - 50/60 Hz) American Dryer Corporation 88 Currant Road / Fall River, MA

55 Electric Oven Power Distribution Kw VAC - 3ø - 50/60 Hz MLE-130 (80KW) ELECTRIC OVEN POWER DISTRIBUTION (80 Kw VAC - 3ø - 50/60 Hz) Telephone: (508) Fax: (508)

56 54 Electric Oven Power Distribution 80 Kw /480 VAC - 3ø - 50/60 Hz MLE-130 (80KW) ELECTRIC OVEN POWER DISTRIBUTION (80 Kw /480 VAC - 3ø - 50/60 Hz) American Dryer Corporation 88 Currant Road / Fall River, MA

57 Electric Oven Wiring 72/80 Kw VAC - 3ø - 50/60 Hz 55 Telephone: (508) Fax: (508)

58 56 Electric Oven Wiring 72/80 Kw /480 VAC - 3ø - 50/60 Hz American Dryer Corporation 88 Currant Road / Fall River, MA

59 Additional Parts Available 57 Part No. Description "Check Rotation" Label "CAUTION - Disconnect Supply" Label "Manual Hi-Limit Reset" Label "Phase 6 Computer 'A - B' Factor" Label "Grease Instruction" Label /8" Straight (BX) Connector /8" x 45 (BX) Connector /8" Red Jacket (BX) Insulator /8" Jiffy Clip (BX Retainer Clip) /8" Greenfield (BX) /4" In-Line Connector Red Butt Connector #74B Wire Nut Crimp-on Wire Nut /4" Insulated (female) Terminal Tab Receptacle Combination " Harness Tie " Harness Tie Harness Tie Mounting Clip Manometer (water column test gauge) Snap Wire Tie Screw Mount Electrical Terminal (assortment) Kit Telephone: (508) Fax: (508)

60 ADC /08/ * 01/14/00-35