Side-by-side fridge SPECIFICATIONS DESIGNER OPTIONS XRSS465BB VARIATION/NOTES

Transcription

1 SPECIFICATIONS XRSS46BB Side-by-side fridge Note: Doors protrude beyond cabinetry. Allow 10mm each side for ease of installation. Note: Amana refrigerators have been designed for full access to most interior parts with the doors open to 90 degrees, providing there is a 6mm clearance, as shown to the side wall. Full access can be achieved with increased corner clearances. All height dimensions are based on wheel settings of 1mm. Height dimensions can be varied according to adjustment of the wheel settings. Minimum wheel setting - 1mm. Maximum wheel setting - 34mm. DESIGNER OPTIONS The above measurements are based upon a standard white/black fridge. Should any designer options be fitted, then the following amendments may be required. OPTION VARIATION/NOTES Extended door wrap with concealed hinges & either of: a) 1080mm long Classic handle (14mm dia) Add mm to overall height and recommended cut out size. b) 1070mm long Pro-Line handle (2mm dia) Add mm to overall height and recommended cut out size. c) Full length Regal handle (14mm dia) Add mm to overall height and recommended cut out size. Standard door wrap with featured hinge covers & either of: a) 1080mm long Classic Handle (14mm dia) No change. b) 1070mm long Pro-Line Handle (2mm dia) No change. Extended top (short) Extended top (Pro-Line) Stainless steel side strips Stainless steel toe grille Stainless steel dispenser cover Stainless steel flush fitting perimeter kit Add mm to overall height and recommended cut out size. Add 120mm to overall height and recommended cut out size. Add mm to overall cabinet width. Sits flush with front of door. Protrudes 20mm from front of door. Requires 1000mm cabinet width and 182mm height. Handle & trim kit for fitment of custom door panels to: Black/white models (subject to availability) Add mm to overall height and recommended cut out. Extends back to depth of 10mm from front of cabinet

2 Amana 'B' Series Refrigerator Decorator Options Guide DECAT OPTIONS - REGAL STAINLESS STEEL WRAP Fridge Wrap Optionals Short Top (STS10) Handles Dispenser Model must be ordered with Regal Handles XRSS267BB Fridge Wrap (DSW31) Incl. with DSW31 FFNK2B Pro-Line Top (PTS10) XRSS287BB Fridge Wrap (Non Electronic) XRSS46BB XRSS66BB FFEK2B Side Strips Electronic RSS10 DFS30 (Stainless) Dispenser Frame DECAT OPTIONS - CLASSIC & PRO-LINE STAINLESS STEEL WRAP Fridge Wrap Handles Optionals = As Above Short Top (STS10) Models = As Above Model must be ordered with DHS30 - Classic Dispensers = As above XRSS267BB Fridge Wrap (DSW30) XRSS287BB XRSS46BB XRSS66BB DHS31 - Pro-Line DECAT OPTIONS - FEATURED HINGE STAINLESS STEEL WRAP Fridge Wrap Handles Dispensers DSW32 FFNK2B (non electronic) Model Exposed Hinge DHS30 - Classic FFEK2B (electronic) XRSS267BB XRSS287BB DFS30 Stainless Dispenser Frame XRSS46BB Optionals XRSS66BB Side Strips RSS10 DHS31 - Pro-Line 29/08/02 1

3 Amana 'B' Series Refrigerator Decorator Options Guide DECAT OPTIONS - REGAL STAINLESS STEEL WRAP Fridge Wrap Handles Optionals Regal Handles Short Top (STS10) Incl. with DSW21 Model must be ordered with Fridge wrap XRSS204BB Fridge Wrap (DSW21) Pro-Line Top (PTS10) Side Strips RSS10 DECAT OPTIONS - CLASSIC & PRO-LINE STAINLESS STEEL WRAP Fridge Wrap Handles Optionals Short Top (STS10) must be ordered with Model Fridge Wrap (DSW20) DHS30 - Classic Pro-Line Top (PTS10) XRSS204BB Side Strips RSS10 DHS31 - Pro-Line 29/08/02 2

4 Amana 'B' Series Refrigerator Decorator Options Guide DECAT OPTIONS BLACK REFRIGERAT - Handles, Trim Kits & Custom Panels Optional Custom Panels Handle Required Curved Dispenser Long (Concealed Hinge) Trim Kit HK203B - Black for Freestanding HTBK203S - Stainless HK203S - Stainless FFNK2B (non electronic) HTBK203B - Black Short (Exposed Hinge) Trim Kit FFEK2B (electronic) DS28S - Stainless DS28B - Black No Dispenser (204 Model) Trim Kits includes Handles Builder Dispenser Required (Std) No Dispenser for 204 Model Model Model XRSS267BB XRSS204BB XRSS287BB (Comes with Grab Handles) See attached Technical Sheet XRSS46BB for Custom Panel Sizes XRSS66BB NOTE: The XRSS204BB comes standard with Grab Handles. All other model refrigerators come standard with a square dispenser and no handles. IF FREESTANDING - Curved dispenser will be fitted automatically at no extra cost (See Part No's above) Customer will have to order and pay for handles except for XRSS204BB which has grab handles. The square dispenser can't be used on a freestanding fridge as it is designed to suppport the decorator panel and is not flush fitting. IF PANELLING - Handles come with Trim Kit. Must have a square dispenser. Cannot be panelled with curved dispenser DECAT OPTIONS WHITE REFRIGERAT - Handles, Trim Kits & Custom Panels Optional Custom Panels Builders Dispenser for Custom Panels BFNK2W (non electronic) BFEK2W (electronic) No Dispenser (204 Model) Long (Concealed Hinge) Trim Kit HTBK203W - White Short (Exposed Hinge) Trim Kit DS28W - White Trim Kits includes Handles Builder Dispenser Required No Dispenser for 204 Model Model Model See attached Technical Sheet XRSS267BW XRSS204BW for Custom Panel Sizes XRSS287BW NOTE: All these refrigerators come standard with a curved dispenser and grab handles IF FREESTANDING - Refrigerator is ready to sell. Nothing needs to be ordered or replaced. IF PANELLING - Handles come with Trim Kit. Customer will have to order a Builders Dispenser at an extra cost. (See Part No's above) AS A RULE these refrigerators will not be wrapped. Handle HK203W - White 29/08/02 3

5 Refrigeration Specifications Trim Kits & Custom Panels HTBK203 DS28 Frame Trim Kits A FRAME TRIM KIT The frame trim kit covers the perimeter of both the refrigerator and freezer doors and provides a frame which retains your decorator panels. Optional panels are custom built by your cabinet maker. C Frame trim kits for most models are a one part kit which allows decorator panels up to 2mm to be installed. DO PANELS B BUILT-IN MODEL OPTIONS The built-in models offer unique benefits. These models can be totally integrated and require no air gaps for installation. This is due to the method of air circulation; forced draft condenser cooling through the toe grille. Colour selections are available for the dispenser cavity, frame trim, handles and toe grille as indicated and these are included in the purchase price. Following installation of the frame trim kit (if necessary), the custom made door panels will be fitted by Kleenmaid during installation at no cost. CUSTOM PANELS To achieve the best integration results, custom made decorator panels up to 2mm thick can be applied to match the decor of the kitchen. Laminate panels should be backed to bring the overall thickness to mm to ensure a good fit. ICE N WATER DISPENSER CAVITY UNIT The external Ice n Water dispenser is available on selected models in the Amana range with other models having an optional ice maker located inside the freezer. 3 Panel face Panel face Top, bottom and hinge side edge treatment details for panels over mm thick. Door handle side of panel must have a bevelled edge. Min. Water Pressure 0kPa - 1/2 BSB TAP PANEL WEIGHT To avoid personal injury or property damage, panel weight should not exceed as follows:- Side x Side fresh food door = 13.67kg (30 lbs) Side x side freezer door = 9.07kg (20 lbs) Panel face Above and Below Ice Dispenser. HTBK203B/S/W (Long Concealed Hinges) DS28B/S/W (Short Exposed Hinges) Extended Doors Non Extended Doors Refrigerator Door (C) 1697mm 482mm 1664mm 481mm I & W Door Upper (A) 46mm 34mm 429mm 34mm I & W Door Lower (B) 811mm 34mm 81mm 34mm Non/I & W Door 1697mm 34mm 1664mm 34mm

6 PKS30 - Perimeter Trim Kit 182mm 182mm