EBARA. Submersible Non-clog Pump Model DLFU Model DVFU Model DDLFU
|
|
- Barry Dickerson
- 5 years ago
- Views:
Transcription
1 EBARA Submersible Non-clog Pump Model DLFU Model DVFU Model DDLFU water wastewater EBARA International Corporation Standard Pump Division
2 S ubmersible Non-clog Pump Model DLFU DVFU DDLFU Features Watertight cable entry system prevents capillary action and protects against moisture; reduces maintenance costs Heavy duty, high efficiency, air filled, Class F insulated, rated for F with a. service factor dissipates heat easily; thermal protection in each phase of windings protects; operates cooler with higher efficiencies; longer service life with lower operating costs Self cooling jacket eliminates the need for external pumping devices or special heat transfer fluids; offers simplicity and high reliability by effectively dissipating heat in dry pit applications only Single and double row thrust bearings carries thrust loads with L-0 life of 0,000 hours; ensures long, dependable operation and lowers maintenance costs Mechanically actuated float switch provides early warning of mechanical seal failure; avoids costly motor repairs Double mechanical seals silicon carbide lower seals, carbon/ceramic upper - hard faced upper and lower seals operate in an oil bath; providing longer service life and lower maintenance costs High efficiency impellers pass large solids with high outputs and reduces power consumption; impellers are optimized for hydraulic coverage; lowers operating costs Replaceable wear components maintains working clearances while reducing casing and volute costs
3 Submersible Non-Clog Pump Model DLFU arrangement options Model DDLFU Dry Pit design Motor cooling is provided by internal recirculation of pumpage through water jacket Mechanical seal oil chamber Model DVFU Vortex design Vortex design is ideal for handling stringy materials without clogging Cable entry system Primary seal grommet (NBR) Secondary sealing O rings (NBR) Epoxy resin prevents capillary action Cable gland (grey cast iron) Solid joint butt connector (copper) Note: Entry system is the same for both power and control cables.
4 Model DLFU DVFU DDLFU Materials QDC & Slide Rail System No. Qty Part Name Material ATM/AISI Code 00 Casing Cast Iron A Class 0 00 Intermediate Casing Cast Iron A Class 0 0 Suction Cover Cast Iron A Class 0 0 Hand Hole Cover Cast Iron A Class 0 0 Impeller Cast Iron A Class 0 09 Key 0 Stainless AISI0 set Mechanical Seal Oil Seal Rubber (NBR) - O-ring Rubber (NBR) - O-ring Rubber (NBR) - O-ring Rubber (NBR) - O-ring Rubber (NBR) - O-ring Rubber (NBR) - O-ring Rubber (NBR) -7 O-ring Rubber (NBR) - O-ring Rubber (NBR) 7- Gasket 7- Gasket 7- Gasket 7- Gasket - Bolt 0 Stainless AISI0 - / Bolt 0 Stainless AISI0 - Bolt 0 Stainless AISI0 - Bolt 0 Stainless AISI0 - Bolt 0 Stainless AISI0 - Bolt 0 Stainless AISI0-7 Bolt 0 Stainless AISI0 - Bolt 0 Stainless AISI0-9 Bolt 0 Stainless AISI0-0 Bolt 0 Stainless AISI0 : Recommended spare parts. Quick Discharge Disconnect applies to Wet Pit installations only. Cooling jacket is used on dry pit configurations No. Qty Part Name Material ATM/AISI Code - Bolt 0 Stainless AISI0 Bolt 0 Stainless AISI0 7 Suction Elbow Cast Iron A Class 0 7 Discharge Pipe Cast Iron A Class 0 9- Plug Steel 9- Plug 0 Stainless AISI0 9- Plug 0 Stainless AISI0 9- Plug 0 Stainless AISI0 9- Plug 0 Stainless AISI0 9- Plug 0 Stainless AISI0 00 Lifting Hanger Steel A Grade D 0 Rotor 0 Stator - Power Cable - Control Cable Motor Cover Cast Iron A Class 0 - Bracket Cast Iron A Class 0 - Bracket Cast Iron A Class 0 7 Bracket Cast Iron A Class 0 0 Shaft 0 Stainless AISI0 Water Jacket Steel A Grade D - Washer 0 Stainless AISI0 - Washer 0 Stainless AISI0 9- Ball Bearing 9- Ball Bearing 7 Motor Protector 909 Leakage Detector 9- Packing Rubber (NBR) 9- Packing Rubber (NBR)
5 Submersible Non-Clog Pump Specifications DLFU & DDLFU capacities to 00 GPM heads to feet DVFU capacities to 000 GPM heads to feet Horsepower range to 0 HP 00 RPM Submergence to feet Liquid sump temperatures to 0 F Spherical solids to '' Stainless steel shaft. motor service factor 0 starts per hour L-0 bearing life of 0,000 hours Seal leak detection system Motor over temperature protection embedded in windings FM explosion proof, Class, Division, Group C, D available
6 Model DLFU Selection chart TOTAL HEAD m ft / / / 9 / 0 7 / / / 9 / 0 / 0 0Hz (Synchronous Speed 00 RPM) USGPM m /min CAPACITY 7 7 Please note: Overlap in coverage is designated by the two numbers; for example "9 / 0". Refer to the legend below for the specific model numbers DLFU. HP 9 0DLFU HP 7 00DLFU 0HP 0DLBFU 0HP 0DLMFU. HP 0 00DLMFU HP 0DLFU0 0HP 0DLCFU 0HP 0DLMFU. HP 0DLFU 0HP 9 0DLFU7 0HP 7 0DLFU HP 0DLMFU.7 HP 00DLMFU 0HP 0 0DLFU 0HP 0DLFU 0HP 0DLMFU. 7½HP 0DLFU HP 0DLFU7. 0HP 9 0DLFU0 0HP 0DLCMFU7. 0HP 00DLMFU HP 0DLFU HP 0 0DLFU7 0HP 7 0DLCMFU HP 0DLFU 0HP 0DLFU 0HP 0DLFU 0HP 00DLFU. HP 00DLMFU 0HP 0DLFU HP 00DLFU HP 9 0DLFU. HP 7 00DLFU0 0HP 0DLFU 0HP 00DLFU 0HP 0 00DLMFU. HP 00DLFU7 0HP 00DLFU0 0HP 00DLFU0 0HP 0DLFU. HP 9 00DLFU 0HP 7 00DLFU7 0HP 00DLFU7 0HP 00DLMFU. HP 0 00DLFU. HP 00DLFU 0HP 00DLFU 0HP 0DLFU.7 HP 00DLFU.7 HP 9 00DLFU7. 0HP 00DLMFU.7 HP 00DLFU. 7½HP 0 00DLFU HP 0DLFU. 7½HP 00DLFU7. 0HP 00DLFU 0HP 00DLMFU. 7½HP 00DLFU HP 00DLFU HP 7 0DLFU7. 0HP 00DLFU 0HP 00DLFU 0HP 00DLMFU7. 0HP 00DLFU HP 0DLFU HP EBARA International Corporation Standard Pump Division Cedar Line Drive Rock Hill, SC 970 (t) (f) info@pumpsebara.com EBARA International Corporation EICDLFU 00
DLKF. EBARA Submersible Sewage Pumps Specifications Project: Model: Chk d: Date:
DLKF A. General: Provide submersible sewage pumps suitable for continuous duty operation underwater without loss of watertight integrity to a depth of 65 feet. Pump system design shall include a guide
More informationK4RH(X) Solids-Handling Pumps
Solids-Handling Pumps K4RH(X) 4 Submersible, Recessed Impeller (Class 1, Div. 1, Groups C & D Hazardous Location) RECESSED IMPELLER Handles Stringy and Fibrous Materials Passes Large Solids Pumps Heavier
More informationSubmersible A Series Wastewater Pumps AMX, AV and AK Hydraulic Ranges
Submersible A Series Wastewater Pumps AMX, AV and AK Hydraulic Ranges TM High Performance in Wastewater Pumping HOMA submersible water and wastewater pumps operate worldwide in numerous domestic, municipal
More informationHOMA Pump, Ansonia Connecticut
TM High Performance in HOMA began as a submersible motor manufacturer more than fifty years ago. We expanded into full pump production in the 1960s. Every product we design and manufacture has always exceeded
More informationKEENER GRINDER PUMPS
KEENER GRINDER PUMPS RDSGP1-2021-50Hz 2 HP Grinder Pump Replacement Grinder Pump Direct Interchangeability Double Mechanical Seal Silicon Carbide (Main) - Grit Resistant Carbon Ceramic (Secondary) Dual
More informationKGP(X) Grinder Pumps HP Grinder Pump, 3 Phase (Class 1, Div. 1, Groups C & D Hazardous Location) Performance Curve.
Grinder Pumps KGP(X) 7.5-15HP Grinder Pump, 3 Phase (Class 1, Div. 1, Groups C & D Hazardous Location) (PENDING) The KEEN PUMP KGP(X) series centrifugal grinder pumps are designed for municipal, commercial
More information4VH and 4VHX. 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction
4VH and 4VHX 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction DURABLE MOTOR WILL DELIVER MANY YEARS OF RELIABLE SERVICE Oil-filled motor for maximum heat dissipation
More informationK4RB(X) 4 Submersible, Recessed Impeller (Class 1, Div. 1, Groups C & D Hazardous Location)
Solids-Handling Pumps K4RB(X) 4 Submersible, Recessed Impeller (Class 1, Div. 1, Groups C & D Hazardous Location) HIGH OPERATING PRESSURES Up to 275 Total Dynamic Head Strong Pumping Capacities to 1400
More information- Sewage and Sludge Pumps
- Sewage and Sludge Pumps Technology redefined range of Submersible Sewage and Sludge Pumps are designed to perform impecably in the worst of conditions. Global Approach Keeping in mind the causes of blockage
More informationGoulds HSU, HSUL & JCU. Submersible Pumps
Goulds HSU, HSUL & JCU Submersible Pumps Goulds HSU, HSUL, JCU Model HSU Hydro-solids pumps. Recessed impeller easily accommodates large, stringy and fibrous solids without clogging. Because it is completely
More informationReliable Long-Term Solutions For Your Toughest Pump
Reliable Long-Term Solutions For Your Toughest Pump Municipal Raw Sewage Grit Handling Sludge Recirculation Digester Cleaning Thickened Sludge Storm Water Sump Pump (Pipe Gallery) Head Works Industrial
More informationEVMSU - Vertical Multistage Pumps. Product Catalog
EVMSU - Vertical Multistage Pumps Product Catalog www.pumpsebara.com Built like a Kata a A Katana is a traditional Japanese sword made with distinctive, longstanding expertise started in 300 A.D. Katana
More informationGoulds Trash Hog. Self-Priming Solids Handling Pumps
Goulds Trash Hog Self-Priming Solids Handling Pumps Goulds Trash Hog Self-Priming Pumps Designed for Toughest Solids Handling Services Capacities to 6000 GPM (1363 m 3 /h) Heads to 140 feet (43 m) Temperatures
More informationPUMPS AND CONTROLS. Submittal #1 Pumps. Project Torrance Memorial Medical Center Storm Lift Sation Project #
PUMPS AND CONTROLS Submittal #1 Pumps Project Torrance Memorial Medical Center Storm Lift Sation Project # 007517 Owner Torrance Memorial Medical Center City of Torrance Contractor Bali Construction, Inc.
More informationbrands you trust. The Next Generation of SH Series Pumps BARNES SH SERIES PUMPS
brands you trust. The Next Generation of SH Series Pumps BARNES SH SERIES PUMPS Model SH Series Clogging Resistance Treatment plant operators and utility customers biggest problem continues to be clogging
More informationFamily Curve. Submersible Grinder Pumps 1¼" and 3" Discharge. Effluent/Grinder Pumps.
Family Curve Submersible Grinder Pumps 1¼" and " Discharge 7 12/18 Specifications Submersible Vortex Grinder Pumps SGV, 2HP, Double Seal, Oil-Filled FILE: SPEC4 SCOPE: Furnish and install submersible grinder
More informationFamily Curve. Submersible Grinder Pumps 1¼" and 2" Discharge. Effluent/Grinder Pumps.
Family Curve Submersible Grinder Pumps 1¼" and 2" Discharge 7 11/0 Submersible Vortex Grinder Pumps SGV, 2HP, Double Seal, Oil-Filled Word File FILE: SPEC4 SCOPE: Furnish and install submersible grinder
More informationPAPANTONATOS. We supply clean water and remove waste water. P u m p s s e r v ic e & e n g i nee r in g. submersible pumps. s e w a g e p u m p s
PAPANTONATOS P u m p s s e r v ic e & e n g i nee r in g We supply clean water and remove waste water s e w a g e p u m p s submersible pumps The Company QUALITY WHICH REDUCES PUMPING COSTS For over 45
More informationSTATION MODEL: KPCG21-24x48 PUMP MODEL: KEEN KPCG21 VOLTAGE: 230 PHASE: 1 TANK DIMENSIONS: 24 DIAMETER X 48 DEEP
STATION MODEL: KPCG21-24x48 PUMP MODEL: KEEN KPCG21 VOLTAGE: 230 PHASE: 1 TANK DIMENSIONS: 24 DIAMETER X 48 DEEP PUMP Grinder Pumps KPCG-21 1HP Dual Seal, High Performance Progressive Cavity Grinder Pump,
More informationSUBMERSIBLE SOLIDS HANDLING PUMPS Features and Benefits:
SUBMERSIBLE SOLIDS HANDLING PUMPS Features and Benefits: Oil Filled Motors Cooler operating than air filled motors and continuous lubrication of the bearings for longer life Slip Fit Stators For easy of
More informationFull-line Product Overview
Full-line Product Overview End Suction Centrifugal Pumps This general purpose pump can be configured in frame-mounted and close-coupled, semi-open and enclosed impeller configurations. They are available
More informationCompany name: Created by: Phone:
Position Qty. Description 1 SL1..1.55..6G.C Product o.: 9655 ote! Product picture may differ from actual product on-self-priming, single-stage, centrifugal pump designed for handling wastewater, process
More informationMARLOW PUMPS RECIRCULATION
End suction centrifugal pump line available in both close coupled and frame mounted configurations allow users to meet exactly most flow conditions on commercial pool and waterpark applications. Features
More informationDUPLEX CONDENSATE TANK SYSTEM
DUPLEX CONDENSATE TANK SYSTEM PROJECT NAME: 7 EAST 54TH STREET CONTRACTOR: PRO PUMP CORP ENGINEER: KEVAN WOODWORTH SUBMITTED BY: NISSIM ISAACSON DATE: 2.20.205 DESIGN DATA Model GPM TDH HP Volt Phase RPM
More informationPOULTRY MARKET CATALOG
POULTRY MARKET CATALOG FW0134 0518 Supersedes 0714 Evaporative Cooling Pumps: 1-1/2 or 2 in. discharge Centrifugal Booster Pumps Pressure Booster Pumps Engineered Poultry Pumping Systems One year limited
More informationSubmersible and Immersible Pumps
Submersible and Immersible Pumps for sewage & sludges A range of quality pumps featuring the unique Hidrostal Screw Centrifugal Impeller. Models are available for fully, partially submerged or dry installation
More informationFLANGE-MOUNT CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES GV6 SECTION E PAGE ISSUED /0 REPLACES /0 FLANGE-MOUNT CENTRIFUGAL PUMPS Idel for OEM applications
More informationCORNELL PUMP COMPANY MINE DEWATERING WHEN RELIABILITY MATTERS
CORNELL PUMP COMPANY MINE DEWATERING WHEN RELIABILITY MATTERS MINE DEWATERING high efficiency SETTING THE STANDARD Cornell s Redi-Prime pumps are designed and engineered for the most rugged and demanding
More informationSUBMERSIBLE PUMPS For water with particulate matter 2 pole - 50 Hz 2 ranges : SS 304 & SS 316 L
operating limits Flow up to: m /h Head up to: m w.g. Liquid temperature range: + to 5 C* Specific gravity of liquid:.5 max. ph of liquid: - Max. immersion depth: m Free passage: Ø mm ND of discharge port:
More informationSECTION WASTEWATER PUMPING STATION DESCRIPTION
SECTION 33 3200 WASTEWATER PUMPING STATION DESCRIPTION The contractor shall furnish and install one submersible sewage lift station with concrete wet well and valve vault, pumps, 4 piping and valves, and
More informationSL EX.4.51D
GRUNDFOS DATA BOOKLET SL1.1.1.75.EX.4.51D Grundfos pump 962669 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/sl1/962669/sl1-1-1-75-ex-4-51d-c.html
More informationSUBMERSIBLE SOLIDS HANDLING PUMPS
SUBMERSIBLE SOLIDS HANDLING PUMPS Features and Benefits: Oil Filled Motors Cooler operating than air filled motors and continuous lubrication of the bearings for longer life Slip Fit Stators For easy of
More informationDean Pump High Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump High Temperature Chemical Process Inline Pumps Series DL Dean Pump Series DL High Temperature Chemical Process Inline Pumps Capacities to 600 GPM (182 m 3 /hr) Heads to 0 feet
More informationGoulds Trash Hog. Self-Priming Solids Handling Pump
Goulds Trash Hog Self-Priming Solids Handling Pump Goulds Trash Hog Self-Priming Pumps Designed for Toughest Solids Handling Services Capacities to 6,000 GPM (1,363 m3/h) Heads to 140 feet (43 m) Temperatures
More informationFAIRBANKS NIJHUIS SOLIDS HANDLING PUMPS.
FAIRBANKS NIJHUIS SOLIDS HANDLING PUMPS www.fairbanksnijhuis.com FAIRBANKS NIJHUIS History and Development Since the early part of this century, Fairbanks Nijhuis Pump has set industry standards in innovative
More informationDNJ SERIES PUMPS END SUCTION CLOSE COUPLED
DNJ SERIES PUMPS END SUCTION CLOSE COUPLED DNJ SERIES PUMPS These are close coupled with standard JM solids shaft ball bearing motors specially designed for pump applications in accordance with standards
More informationDS series STERLING PUMPS. Industrial End Suction Pumps ISO/DP
DS series Industrial End Suction Pumps ISO/DP 5199 www.sterlingpumps.com.au DS series Capacities from: Heads from: 340 to 5,680 m3/h (1,500 to 25,000 USPGM) 21 to 106 metres (70 to 350 feet) Power range
More informationKRS data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
KRS822-50 data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
More informationIndustrial. Solutions brands you trust. Product Overview
Industrial Solutions brands you trust. Product Overview Industrial Pump Applications Crane & Systems design s the most efficient and economical pumps to serve the large diversity of industrial applications
More informationFlygt N-pumps 3231, 3306, 3312, 3356, 3400
Flygt N-pumps 3231, 3306, 3312, 3356, 3400 The large wastewater pumps that cut operating costs motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48
More informationSUMP PUMPS, EFFLUENT PUMPS AND SEWAGE PUMPS
SUMP PUMPS, EFFLUENT PUMPS AND SEWAGE PUMPS FW19 17 Supersedes 11 FOR WATER REMOVAL vortex impeller on submersible models SE Premium vertical switch Thermal overload protected Cast iron or thermoplastic
More informationSL S.S.N.51D
GRUNDFOS DATA BOOKLET SL1.8..265.2.52S.S.N.51D Grundfos Pump 9814549 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/seslfam/9814549/sl1-8--265-2-52s-s-n-51d.html
More informationOTHER BJM PRODUCTS SUBMERSIBLE PUMP CAPABILITIES. PERFECTA SERIES SLIDE RAILS CONTROL PANELS THE RIGHT PUMP FOR TOUGH JOBS
BJM PUMPS THE RIGHT PUMP FOR TOUGH JOBS Non-Metallic (NORYL) pump body for handling chemically aggressive liquids XP MOTORS FOR HAZARDOUS LOCATIONS FM approved Class I, Division 1 Groups C & D locations
More informationThe Next Generation of
brands you trust. The Next Generation of SH Series Pumps BARNES SH SERIES PUMPS Model SH Series Clogging Resistance We have heard from many Utility Customers that clogging of their Solids Handling pumps
More informationFlygt centrifugal grinder pumps
Flygt centrifugal grinder pumps For heavy-duty shredding applications Introduction Non-clogging grinder pump for tough challenges Why choose a Flygt grinder pump? Provides high efficiency Adjusts to actual
More informationVertical Heavy Duty Pumps
Vertical Heavy Duty 7550 Series Vertical End Suction 7600 Series Top Pull Out Enclosed Column Centrifugal Vortex Non Clog Slurry Cantilever TM Vertical? For all process services and applications, the Gusher
More informationCAST IRON IMPELLER B4JRMBH. TYPE B SINGLE STAGE CENTRIFUGAL PUMP Bearing Frame Mount TABLE I
Page 90. Date January, 004 Supersedes //95 B4JRMBH Packing Construction 3 9 3 8 Volute Impeller B/M No. Rotation Case Impeller Diameter B3 CW H03843 L059 3.50 B33 CCW H03848 L0594 3.50 8 00 095 3 See Supplement
More informationVSA SEWAGE PUMP. Capacities to 1600 gpm, Heads to 120, Horsepower range 3/4 thru 40, 3 thru 6 discharge, 1750 and 1150 operation.
Brochure# 228E 122011 TYPE VSA SEWAGE PUMP Capacities to 100 gpm, Heads to 120, Horsepower range 3/ thru 0, 3 thru discharge, 1750 and 1150 operation. HIGHLIGHTS Wet-Pit Installations Pumps Suspend From
More informationGoulds Large Capacity, Single Stage, Double Suction Pump
Goulds 3498 Large Capacity, Single Stage, Double Suction Pump 3498 Double Suction Pumps Designed for a Wide Range of Heavy Duty Industrial, Marine and Power Generation Services Capacities to 8,00 m 3 /h
More informationCPVC Horizontal. Series HV. Centrifugal Pump. Flows to 132 GPM Pressure to 81 Ft. TDH. Model HV-1 1/2DV
Series HV Flows to 132 GPM Pressure to 81 Ft. TDH Model HV-1 1/2DV CPVC Horizontal Centrifugal Pump Features: True Volute Design High Efficiency Energy Saving Higher Flow vs. Pressure No Metal Contact
More informationNJWEA TECH TRANSFER MARCH 1, 2016
Applications Immersible Dry Pit Design Considerations Scott Hansen & Andrew Stein Dave Heiner Associates Always submerged Immersible Can be submerged for a finite amount of times. Dry Pit submersible Located
More informationETP Series - Self Priming Pumps
ETP Series - Self Priming Pumps ETP SERIES Decades of experience in development & manufacturing of injection Moulded Polypropylene Corrosion Resistant Pumps. Design philosophy is to design pumps that are
More informationMODEL 652A MODEL 654A MODEL 652A MODEL 653A MODEL 651A AURORA. 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS
MODEL 652A MODEL 654A MODEL 652A MODEL 651A MODEL 653A AURORA 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS WWW.AURORAPUMP.COM 2 AURORA 650 Series Single Stage Solids Handling Pumps Capacities to 2000
More information50TMA data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Data Sheet Total Head m start water level Efficiency % Output kw stop water level
More informationD. NEMA Compliance: Provide electric motors and components which comply with NEMA standards.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationMODEL 664A MODEL 662A MODEL 663A MODEL 661A AURORA. 660 Series SINGLE STAGE SOLIDS HANDLING VORTEX PUMPS
MODEL 662A MODEL 664A MODEL 661A MODEL 663A AURORA 660 Series SINGLE STAGE SOLIDS HANDLING VORTEX PUMPS WWW.AURORAPUMP.COM 2 AURORA 660 Series Single Stage Solids Handling Vortex Pumps Capacities to 2600
More informationCombiChem. Centrifugal pumps according to ISO 5199 and ISO 2858 / EN (DIN 24256)
CombiChem Centrifugal pumps according to ISO 199 and ISO 88 / EN 88 (DIN 46) The SPX Johnson Pump Combi system is a modular programme of single stage CombiChem No limits to reliability! centrifugal pumps
More informationKTZ data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet
KTZ22.2-5 data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429
More informationINDUSTRIAL AND MARINE PUMPING SOLUTIONS
INDUSTRIAL AND MARINE PUMPING SOLUTIONS WHEN THE GOING GETS TOUGH THE TOUGH KEEP GOING AND GOING AND GOING AND GOING AND GOING... GILKES PUMPING SYSTEMS PUMPING SYSTEMS INDUSTRIAL AND MARINE PUMPING SOLUTIONS
More informationSECTION STEAM CONDENSATE PUMPS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 23 22 23 STEAM CONDENSATE PUMPS SPEC WRITER NOTES: 1. Delete between // ---- // if not applicable to project. Also delete any other item or paragraph not applicable
More informationOTHER BJM PRODUCTS SUBMERSIBLE PUMP CAPABILITIES PERFECTA SERIES SLIDE RAILS CONTROL PANELS. THE RIGHT PUMP FOR TOUGH JOBS
PERFECTA SERIES Pumps liquids to 135 F (57 C) Oil filled motor SLIDE RAILS 2 through 6 slide rail assemblies BJM adapters to fit others or existing slide rail systems Flows to 900 GPM (3400 L / Min) Solids
More informationSEWAGE PUMPS WITH CUTTER IMPELLER
www.tsurumiglobal.com C SEWAGE PUMPS WITH CUTTER IMPELLER Submersible Sewage Pumps with Impeller Performance Range Tsurumi Cseries pumps are heavyduty, submersible cutter pumps for sewage and wastewater,
More informationMinerals. WARMAN Centrifugal Slurry Pumps SHW Submersible Slurry Pump
Minerals WRMN entrifugal Slurry s SHW Submersible Slurry The Warman SHW submersible slurry pump offers exceptional wear life and reliability, with low ownership costs. uilt to last The design process of
More informationCentrifugal Pumps acc. to DIN EN ISO 2858 with Shaft Sealing Type NCL
Centrifugal Pumps acc. to DIN EN ISO 2858 with Shaft Sealing Type NCL General The DICKOW centrifugal pump, type NCL, is designed for handling liquids in the chemical and petrochemical industry, in refineries,
More informationHorizontal Split Case Pumps Type U
Horizontal Split Case Pumps Type U 7.1 7.2 Stage U Type Pumps Features: Axially Split Case Design Range from 20M 3 /Hr to 600M 3 /Hr Two Stage Pump Single Suction Twin Volute Casing Design Closed type
More informationCentrifugal Pumps acc. to EN / ISO 2858 with Shaft Sealing Type NCL
Centrifugal Pumps acc. to EN 22858 / ISO 2858 with Shaft Sealing Type NCL General The DICKOW centrifugal pump acc. to EN 22858 / ISO 2858 is designed for handling liquids in the chemical and petrochemical
More informationSeries 4XSHV 18 Frame Driver 76mm Spherical Solids Handling
18 Frame Driver 76mm Spherical Solids Handling Specifications: DISCHARGE...4", 125 lb. Horizontal Flange Slotted to accommodate 100mm ISO Flanges LIQUID TEMPERATURE...104 F (40 C) Continuous VOLUTE...Cast
More information15-BER3. parts list as Excel-spreadsheet. Tsurumi Europe GmbH
5-BER3 data sheet parts list exploded view dimensional drawing free standing type dimensional drawing TOS-type sectional drawing free standing type sectional drawing TOS-type performance curve parts list
More informationSERIES ES BASE MOUNTED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES ES PAGE BASE MOUNTED TURBINE PUMPS ES - 75 RPM - 60Hz. ES - 350 RPM - 60Hz. (See Individual curves for symbol number) ES - 900 RPM - 50Hz. (See Individual
More informationDESCRIPTION IMPELLER INSPECTION MAINTENANCE POWER CORD REPLACEMENT IMPELLER REPLACEMENT MECHANICAL SEAL REPLACEMENT IMPELLER INSPECTION /REPLACEMENT
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
More informationPENGUIN SERIES HSC PUMPS INTRODUCTION
PENGUIN Installation & Maintenance SERIES HSC PUMPS MODELS HSC-1/4 HSC-1/2 HSC-3/4 HSC-1 HSC-2 HSC-3 SEALS S - Single D - Double M - Single/Multi-Stage INTRODUCTION Penguin 316 stainless steel centrifugal
More informationEnd-Suction Centrifugal Pump
GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM
More informationEnd-Suction Centrifugal Pump
GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM
More informationHTM Circulation Pumps acc. to DIN EN 733 Type NKX
HTM Circulation Pumps acc. to DIN EN 733 Type NKX General The new NKX pump line replaces our former heat transfer oil circulation pump type NKL s. The outer dimensions of both pump types are identical
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationPUMP. Horizontal Multi-Stage Pump. Type MS SERIES DIMENSION. Model MSL MSH (2 pole motor drive) APPLICATIONS companion flange (SS) Foot valve
seal Bearing Enclosed Gland packing Sleeve bearing (Lubricant oil) Water cooling jacket Bearing, Stuffing box (81-120 C) seal: External flushing PUMP Suction side JIS10K normal type Discharge side JIS10K
More informationLN series STERLING PUMPS. Horizontal Split Case Pumps. Double Volute. Single Stage.
LN series Horizontal Split Case Pumps Double Volute. Single Stage www.sterlingpumps.com.au LN series Sizes: 6 to 42 Capacity to 12,500 m³/h Heads to 190 metres A rugged, single stage, double volute horizontal
More informationPump Installation and Service Manual SPX50/SPX50H Submersible Explosion-Proof Pumps
Pump Installation and Service Manual SPX50/SPX50H Submersible Explosion-Proof Pumps R NOTE! To the installer: Please make sure you provide this manual to the owner of the pumping equipment or to the responsible
More informationUPZ PUMP POWER FOR TOP PERFORMANCE UNDER
Submersible borehole pump People at KSB we make your world flow round! UPZ PUMP POWER FOR TOP PERFORMANCE UNDER THE TOUGHEST CONDITIONS UPZ is top choice wherever submersible borehole pumps have to satisfy
More informationHASSLE FREE SUBMERSIBLE DL
HASSLE FREE SUBMERSIBLE DL Run dry capable, standard cooling jacket and high chrome wear parts means this rugged submersible slurry pump is the last thing you ll need to worry about in your busy day Hassle
More informationWilo IL Vertical Split-Coupled Inline Pumps
Wilo IL Vertical Split-Coupled Inline Pumps Vertical Inline Split-Coupled, Single Stage Pumps March, 2013 Marcos D. Roimicher, Product Manager BS Market Segment, Product Management Department 120-08-002-0313
More informationModel T Professional Series 3/4HP 2 YEAR WARRANTY SEWAGE PUMP
Model T00405 REPAIR PARTS REF. PART DESCRIPTION REF. PART DESCRIPTION 1 450331 Strainer 2 450332 Oil cover "O" ring 3 400447 Impeller 4 450333 Pump casing 5 400450 Oil cover 6 400449 Oil seal 7 400448
More informationTYPE VSM/VSMS VERTICAL SPACE MISER PUMPS
PACO VSM/VSMS TYPE VSM/VSMS VERTICAL SPACE MISER PUMPS Close and Split Coupled VERTICAL SPACE MISER Type VSM (Close Coupled) Type VSMS (Split Coupled) SMALL FOOTPRINT FOR TIGHT SPACES > Vertically mounted
More informationJ SERIES. Technical Specifications. Centrifugal Pumps for J Series Condensate & Boiler Feed Pumps. Features
Steam Traps Condensate Boiler Feed Valves Strainers Pumps J SERIES Centrifugal Pumps for J Series Condensate & Boiler Feed Pumps Technical Specifications The Sterlco J Series Centrifugal Pumps are designed
More informationMultistage Centrifugal Pumps with Shaft Sealing Type HZ / HZA / HZAR
Multistage Centrifugal Pumps with Shaft Sealing Type HZ / HZA / HZAR General DICKOW-pumps of series HZ/HZA are single- or multistage centrifugal pumps with shaft sealing. Application HZ/HZA-pumps are applied
More informationSECTION PLUMBING EQUIPMENT Piping (Plumbing). 2. Division 16 - Electrical Wiring and Connections.
SECTION 15450 PLUMBING EQUIPMENT PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15410 - Piping (Plumbing). 2. Division 16 - Electrical Wiring and Connections. 1.02 SUBMITTALS A. Submit properly identified
More information.2 Section Waste Management and Disposal..5 Section Motors, Drives and Guards for Mechanical Systems.
Issued 2006/08/01 Section 15131 Pumps Hydronic Systems Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal.3 Section 01780
More informationPumps SELECTION OF A PUMP
Pumps SELECTION OF A PUMP A water system needs to move the water produced from the source to its customers. In almost all cases in Minnesota, the source is at a lower elevation than the user so the water
More informationVertical Ring-section Pump WKTB. Type Series Booklet
WKTB Type Series Booklet Legal information/copyright Type Series Booklet WKTB All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for
More informationExperience In Motion. WXH and WXM Utility-Grade Multistage Ring Section Pumps
Experience In Motion WXH and WXM Utility-Grade Multistage Ring Section Pumps High reliability and performance in rapid-cycling applications The WXH and WXM multistage ring section pumps are specifically
More informationSeries SR Compact Centrifugal Mag-Drive Pumps. WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec
WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec Series SR Compact Centrifugal Mag-Drive Pumps Providing environmentally safe sealless, magnetic pumps of the highest quality for over 30
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationSeries P. Installation & Maintenance. Materials: A - CPVC B - Polypropylene C - PVDF
Series P Installation & Maintenance Models: P-/5 P-/6 P-/4 P-/ P-/-HP P-3/4 P-3/4HP P- P- / P- P-3 P-5 P-7 / Materials: A - CPVC B - Polypropylene C - PVDF Introduction Penguin Pumps are designed to handle
More informationGoulds 3600 Between-Bearing, Axially-Split, Multi-Stage Pumps. Goulds Pumps
Between-Bearing, Axially-Split, Multi-Stage Pumps Goulds Pumps A Leader in API Engineered Pump Package Solutions Proven API Leadership ITT Goulds Pumps is a proven leader in API Pumps Over 18,000 units
More informationGSZ/GSD HIGH VOLUME DEWATERING PUMPS
www.tsurumi-global.com / HIGH VOLUME DEWATERING PUMPS Submersible High Volume Dewatering Pumps Tsurumi and series of submersible heavy-duty pumps deliver high volume discharge. This former consists of
More informationCLOSED COUPLED CENTRIFUGAL PUMPS
0 Third Street Piqua, Ohio 6-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G--/ G6--/ SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM - 60Hz.
More informationCAP SERIES SEWAGE AND WASTE WATER PUMPS
Part 8 CAP SERIES SEWAGE AND WASTE WATER PUMPS TECHNICAL SPECIFICATIONS : Turbosan CAP series consists of centrifugal sewage and waste water pumps. They are used for pumping muddy liquids like sewage and
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationPL PERFORMANCE FIELDS
PL/LL PUMPS PL/LL 1 PL PERFORMANCE FIELDS SUPERSEDES ISSUED Use for pre-selection only. 3 711 74 7 776 1 1 1 3 4 Flow, l/s 1 1 8 761 781 711 711 3 714 1 1 3 4 Flow, l/s ITT Flygt Series P-7 Electric Submersible
More informationB. HI Compliance: Design, manufacture, and install pumps in accordance with HI "Hydraulic Institute Standards."
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More information