JENSEN-SENKING BATCH TRANSFER DRYING TUMBLER

Transcription

1 JENSEN-SENKING BATCH TRANSFER DRYING TUMBLER DT 60, 90, 120, 140, 190, 240 High production capacity, low energy consumption

2 SENKING batch dryers, kg capacity Applications For shaking, conditioning or full drying of water extracted linen The dryer works in conjunction with water extraction presses or centrifugal extractors and a continuous batch washer or washer extractors Installation possibilities Side by side in a twin configuration For various forms of heating Steam Gas Thermal fluid oil Inner drum, path ring, running wheels.

3 Mechanical design High drum volume for increased output Larger perforated surface of drum guarantees high evaporation performance Possibility to control the rotation speed of the drum by means of a frequency converter Largely dimensioned loading door opening, complete front wall can be swung away for maintenance Drum removable from the front and rear sides Easily accessible axial seals with long life All parts coming in contact with linen are made of stainless steel High temperature resistant large-drum wheels with very long life Strong steel housing, (heat and noise insulated) with large maintenance doors for lint filter and control cabinet Almost maintenance free, encased slip-on gear mechanism (no greasing, no tensioning of chains or belts) Large opening angle of unloading door for fast unloading Easy access to all maintenance points All drive elements are fixed by conustensioning elements, easy to maintain (no feather key connections) Control Integrated INTERBUS system for all dryers 100 freely programmable drying programs Visualisation data entry for the compound Drying time control by temperature comparison Advantages High evaporation performance Low energy consumption for heating and drive Low noise level by optimized efficiency of ventilator and strong insulation Reduced maintenance requirements due to longer lifetime of moving elements and good access to all maintenance points Flexible drying programmes for all kinds of linen by easily programmable PLC-control with operator guidance and clear wording indication Basic version steam heated dryer Pedestal height, h = 1025 mm Insulation of housing: Loading and unloading door: Strong heat insulation by double wall door Side doors (lint filter): outstanding insulation by 3-fold wall Basic version gas heated dryer Same as steam heated dryer, plus: Gas burner with full modulating gas valve Air recirculation device Flexible gas connection Monitoring of fan by pressure switch Monitoring of lint filter by differential pressure measuring Sprinkler connection Options Cool-down by: Fresh air flap Partially opened loading door Overdrying protection by temperature control Heat recovery with heating register for steam dryer Automatic lint filter with collecting bag in pedestal Automatic lint filter with suction transport to common collection station Temperature control by motorised valve for steam heated dryers by control of recirculation and fresh air flap by motor (mixed ratio between warm/cold air, based on the exhaust temp.) Additional pedestal heights in steps of 125 mm Teflon coating of inner drum (inside and outside) Loading chute for loading by monorail system Suction loading on loading or unloading side Unloading by tilting device with: Exhaust duct separator Flexible steam/gas connection Flexible water connection for sprinkler for gas dryers Special voltage/special frequency Maintenance platform on the discharging side for simple maintenance Drying time control via measurement of the moisture retention or infrared sensor Drive elements.

4 Air circulation different principles Air circulation 100% air discharge. 2. Air re-circulation 20% discharge Air circulation cool-down with fresh air flap. 4. Air circulation individually adjustable mixing temperature for delicate linen. Fresh air Warm air Mixed air

5 E 150 JENSEN-SENKING Batch Transfer Drying Tumbler B 1630 A C 1920 D (mm) DT 60 DT 90 DT 120 A (Standard) B 915 (Gas 1025) 915 (Gas 1025) 1040 (Gas 1025) Surcharge tilting C 920 (Gas 1030) 920 (Gas 1030) 920 (Gas 1030) D E Technical data: DT 60 DT 90 DT 120 Drum diameter mm Drum depth mm Volume l Filling ratio 1:25 kg Lint filter surface m Steam heating Maximum water evaporation 1 l/min Average water evaporation 1 l/min Connected load for heating kg/h Connection diameter steam DN Connection diameter condensate DN Specific consumption 20% air discharge 2 approx. (kg D/ l H2O) Specific consumption 100% air discharge 2 approx. (kg D/ l H2O) Gas heating Maximum water evaporation 1 l/min Average water evaporation 1 l/min Connection diameter DN Connected load for heating (min. flow pressure 30 mbar) kw Consumption 2 Up to 40% lower than connection value, according to loading/unloading time or cool-down Sprinkler connection Connection diameter (min. flow pressure in front of the dryer) Compressed-air connection Connection diameter (min. flow pressure in front of the dryer) DN bar DN bar 6 12 Consumption 3 approx. l Electrical connection Connected load 4 kw Consumption 4 approx. kwh/h Connected load 5 kw Consumption 5 approx. kwh/h Drying air (quantity of) Inlet air at 20% air discharge (temp. approx. 25 C) 4 approx. m 3 /h Inlet air at 40% air discharge (temp. approx. 25 C) 5 approx. m 3 /h Inlet air 100% air discharge + cool-down (temp. approx. 25 C) approx. m 3 /h Air discharge at 20% air discharge (temp. approx. 100 C) 4 approx. m 3 /h Air discharge at 40% air discharge (temp. approx. 100 C) 5 approx. m 3 /h Air discharge at 100% air discharge + cool-down (temp. approx. 100 C) approx. m 3 /h Weight net kg Acc. to DIN with full drying of terry towels 100x50 cm with up to 375 g/m 2 2 Conditions on request 3 Per batch, volume under norm conditions (0 C, 1 bar) (subject to technical modifications) 4 In case of steam heating 5 In case of gas heating

6 Drying tumblers in twin configuration. Installation Service Call us... To ensure correct performance, the planning and installation should be carried out by an authorized JENSEN distributor or a JENSEN engineer. JENSEN provides back-up service through a worldwide network of highly qualified distributors, all with their own maintenance and spare parts services. JENSEN provides a complete range of equipment to the heavy-duty laundries, delivered and installed according to your specifications. Please do not hesitate to contact us for further advice and information, e.g. by paying us a visit at We reserve the right to change technical data and manufacturing details as part of our ongoing product development. All consumption and output data are approximate and depend in particular on the kind of linen. The data is only valid if the stated flow and operating pressures are maintained. A world of competence JENSEN the heavy-duty laundry division in LSG, Laundry Systems Group JENSEN s world of competence comprises the following JENSEN brand names: JENSEN the market leader in finishing automation METRICON the world s most advanced garment sorting and handling system SENKING the market leader in washing equipment FUTURAIL world leader in customised laundry handling solutions and logistics systems D HOOGE/L-TRON the washer extractor and dryer product range JPbureau / MR /