MARINE. High efficiency pumps you can rely on
|
|
- Leslie Bishop
- 5 years ago
- Views:
Transcription
1 DESMI MARINE PUMPS High efficiency pumps you can rely on
2 Vertical In-Line Pumps - Mainstream Designs Our latest design in vertical in- Double suction pumps for the Pumps for the low capacities. line pumps. High efficiency pumps in a high capacities. The double suction design Used as circulating pumps for seawater and fresh water. cost-effective construction. Several types of coupling and material choices ensure the correct selection for the job. means low NPSH values.
3 Vertical In-Line Centrifugal Pumps - NSL Various material combinations for different applications, e.g. A: Cast iron casing - Bronze impeller D: Bronze casing - NiAluBronze impeller E: Special bronze alloys: RG10, NiAluBronze etc. Several types of couplings: Closed coupled without bearing - type 12 Closed coupled with bearing - type 02 Spacer coupling in light version - type 13 Spacer coupling in heavy version - type 14 Spacer coupling in special solid version - type 15 NEW: Spacer coupling in compact design - type Different sizes. DIN flanges as standard - ANSI, JIS as options. Any make of AC - or DC electric motor as well as hydraulic motors. Special designs with cardan shaft drive, special shaft seals, temperature sensors etc. on request. Different designs of casings: Sizes with impeller 215 & 265: Same dimension suction and discharge branch. Sizes with impeller 330, 415 & 525: Suction branch one dimension bigger than discharge branch. Inlet and outlet tangential offset to centre line of the shaft. Wear ring on both sides of the impeller.
4 Working Pressure & RPM for NSL Spacer Max. Max. Pump working pressure [bar] Bronze / Cast iron Max. working pressure [bar] SG-iron Max. RPM Light / heavy bearing housing Pump working pressure [bar] Bronze / Cast iron Max. working pressure [bar] SG-iron Max. RPM NSL / 3600 NSL / 3600 NSL NSL / *) / NSL / NSL / 3600 NSL / NSL , / 3600 NSL NSL / / NSL / NSL / / NSL / NSL / 3600 NSL / NSL , / 3600 NSL / NSL / / NSL / NSL / / NSL / NSL NSL *) When used with 2-poled electric motors cast iron to be replaced by ductile iron GGG40 and bronze to be replaced with NiAluBronze. The above-mentioned max. working pressure is NOT valid for pumps approved by a classification society. Pumps approved by classification societies have been pressure tested according to the requirements of these societies, i.e. a test pressure of 1.5 x the permissible working pressure. The test pressure is stated in the test certificate and stamped into the discharge flange of the pump.
5 Working Pressure & RPM for NSL Monobloc Max. working M ax. Max. working M ax. Pump pressure [bar] Bronze / Cast iron working pressure [bar] SG-iron Max. RPM 12- / 02- combination Pump pressure [bar] Bronze / Cast iron working pressure [bar] SG-iron Max. RPM 12- / 02- combination NSL / 3600 NSL / 1800 NSL / 3600 NSL / / 1800 NSL / / 3600*) NSL / / 1800 NSL / 3600 NSL / 1800 NSL / 3600 NSL / / 1800 NSL / / 1800 NSL / / 1800 NSL / / 1800 NSL / / 1800 NSL / 3600 NSL / / 1800 NSL / 3600 NSL / / 1800 NSL / / 1800 NSL / / 1800 NSL / / 1800 NSL / 1800 NSL / 1800 *) When used with 2-poled electric motors cast iron to be replaced by ductile iron GGG40 and bronze to be replaced by NiAluBronze. The above-mentioned max. working pressure is NOT valid for pumps approved by a classification society. Pumps approved by classification societies have been pressure tested according to the requirements of these societies, i.e. a test pressure of 1.5 x the permissible working pressure. The test pressure is stated in the test certificate and stamped into the discharge flange of the pump.
6 Vertical In-Line Centrifugal pumps - DSL Various material combinations for different applications, e.g. A: Cast iron casing - Bronze impeller D: Bronze casing - NiAluBronze impeller E: Special bronze alloys: RG10, NiAluBronze etc. Two types of couplings: Spacer coupling Compact design Double suction design to ensure low NPSH values 2 Sizes: DSL & DIN flanges as standard - ANSI, JIS as options. Any make of AC - or DC electric motor as well as hydraulic motors. Special designs with cardan shaft drive, special shaft seals, temperature sensors etc. on request. Bearings and shaft seal at both top and bottom. Bottom seal mechanical or slide bearing. New design: With separate base plate
7 Vertical In-Line Centrifugal Pumps - DSL Type Max. power consumption Max. permissible KW working pressure 740/870/980/1170/ 1450 / 1750 rpm bar DSL / - / 30 / 50 / 95 / DSL / 150 / 215 / 365 / - / - 5 The above-mentioned max. working pressure is NOT valid for pumps approved by a classification society. Pumps approved dby classification i societies i have been pressure tested according to the requirements of these societies, i.e. a test pressure of 1.5 x the permissible working pressure. The test pressure is stated in the test certificate and stamped into the discharge flange of the pump.
8 Vertical In-Line Centrifugal Pumps - PVLN Various material combinations for different applications, e.g. Cast iron for fresh water Bronze materials for seawater Only one type of coupling: Close coupled without bearing All pumps - except PVLN 2150 & are designed for PN 10 as standard. PVLN 2150 & 2200 as PN 6 as standard, if PN 10 ductile iron must be used. 12 different sizes. DIN flanges as standard. Available with any make of AC - or DC electric motors.
9 Vertical In-Line Pumps - Original designs Our old design which is now Our old design which is now An old design which h is now replaced by NSL. replaced by DSL replaced by NSL - however, type V will be redesigned as an NSL Pump.
10 Vertical In-Line Centrifugal Pumps - SL Various material combinations for different applications, e.g. Cast iron for fresh water Bronze materials for seawater Nodular cast iron for media with high casing pressure. Two types of couplings available: Spacer coupling Monobloc without bearing When motors with flange diameter exceeding 400 mm is used, a special solid motor bracket is needed. 20 different sizes. DIN flanges as standrad, ANI & JIS flanges as options. Any make of AC- or DC electric motors as well as hydraulic motors.
11 Vertical In-Line Centrifugal Pumps - DKVAZ Various material combinations for different applications, e.g. Cast iron for fresh water Bronze materials for seawater Nodular cast iron for media with high casing pressure Only one type coupling available Max permissible working pressure: 9 bar Only one size available. Split- casing design, i.e. the casing is axially split.
12 Vertical In-Line Centrifugal Pumps - SL The following working pressures are allowed: Power Pressure kw 1450/1750/2950/3 Pressure Power kw Type bar 500 Type bar 1450/1750 SL /3.2/16.5/28 SL /48 SL /7.4/33/48 SL /81 SL /6.0/27/47 SL ,5 18,4/31 SL /10.1/43/79 SL /61 SL /19.6/79/124 SL /107 SL /9.6/48/83 SL /41 SL /17.5/74/119 SL /80 SL /31/--/-- / SL /147 SL /11,6/--/-- SL /135 SL /25/--/-- SL /210 The above mentioned max working pressure is NOT valid for pumps approved by a classification The above-mentioned max. working pressure is NOT valid for pumps approved by a classification society. Pumps approved by classification societies have been pressure tested according to the requirements of these societies, i.e. a test pressure of 1.5 x the permissible working pressure. The test pressure is stated in the test certificate and stamped into the discharge flange of the pump.
13 Vertical In-Line Centrifugal Pumps Modular V Various material combinations for different applications, e.g. Cast iron for fresh water Bronze materials for seawater Nodular cast iron for media with high casing pressure Two types of coupling: Spacer coupling Monobloc with bearing 4 different sizes. DIN flanges only. PUMP V V V V PRESSURE mwc
14 Ejector Priming Units The ejector is driven by compressed air If the main pump can be flooded the priming unit must be with 2 solenoid valves. Available with ½ and 1 ejector. The complete unit is mounted on a plate with the ejector, pressure control, solenoid valve, non-return valve and filter
15 Priming Pumps Materials: Casing and shaft seal cover - bronze Shaft - stainless steel Shaft seal - mechanical NEW DESIGN: Casing & Impeller - POM (acetal copolymer) 2sizes: B-114 & B-218 The priming pump is connected to the suction side of main pump and evacuates air from the suction pipe. The evacuated air - with water - is pumped through the feed water tank to outlet, which must be connected to the bilge pipe. Capacity: m³ air per hour Control box with timer or pressure switch available. Supplied as complete units with Supplied as complete units with feed water tank, filter etc.
16 Self-priming Pumps - NEW DESIGN The well-known and highly The closed-coupled coupled design of The pump type which recognised type of selfpriming pumps. the self-priming pump. combines the standard selfpriming design with the star The rigid design eliminates wheel from the water ring More than 25 years in the market, but still up-to-date. the risk of incorrect alignment. pump. This means super fast and reliable priming.
17 Self-priming Pumps - Modular S Various material combinations for different applications, e.g. A: Cast iron casing - NiAluBronze impeller D: Bronze casing - NiAluBronze impeller E: Special bronze alloys: RG10, NiAluBronze etc. Impellers are closed, except S and S different sizes. DIN flanges only, however the new open design makes the use of for ANSI & JIS flanges possible. Any make of DC- or AC motors. Different types of drives: On base plate with electric motor On base plate with diesel of petrol engine Close coupled with electric motor Close coupled with hydraulic motor Manual friction clutch and V-belt pulley El-magnetic friction clutch and V-belt pulley
18 Self-priming Pumps - Modular S Monobloc This type is based upon the standard Modular S pump, i.e. the same casing, suction piece, and impeller. The pump with motor bracket is a unit on which coupling and motor flange and electric motor must be mounted. Consequently pumps p with bracket can be stored with loose couplings and flanges to build a complete unit. 12 different sizes. DIN flanges only, however the new open design makes the use of for ANSI & JIS flanges possible. Any make of DC- or AC motors.
19 Self-priming Pumps - Modular S The following working pressures are allowed: PUMP S S S S S PRESSURE mwc PUMP S S S S S PRESSURE mwc PUMP S S S S PRESSURE mwc (10.2 mwc = 1 bar) The above-mentioned max. working pressure is NOT valid for pumps approved by a classification society. Pumps approved by classification societies have been pressure tested according to the requirements of these societies, i.e. a test pressure of 1.5 x the permissible working pressure. The test pressure is stated in the test certificate and stamped into the discharge flange of the pump.
20 Self-priming Pumps - Modular S PRIMING TIMES AND MAX. SUCTION HEIGHTS FOR MODULAR S PUMPS Suction time in min. Max. Suction height ht in meter 1450 R.P.M R.P.M R.P.M R.P.M. Full/Re.1/Re.2 S S S / 9.8 / 9.4 S S / 9.2 / 9 S / 9.8 / 9 S / 8 / 6 S / 9.3 / 9.5 S / 9.9 / 9.9 S S / 8.9 / 7.2 S / 9.2 / 7.8 S / 9.3 / 9 S / 9.5 / m. suction height, same dim. Pipe as the pumps discharge
21 Modular S - Superprimer Materials as standard d Modular S pumps Available on base plate with flexible coupling and in monobloc design. This pump can replace Mono-pumps as bilge pumps in thousands of fishing vessels, coasters as well as luxury yachts. 2 different sizes (S and S ). Double priming system ensures super fast and reliable priming and evacuation of piping systems.
22 DESMI Dirty Water Vacuum Pumps Priming principle based upon the liquid ring system. The pumps are with standard impeller as well as a special rotor. Materials: As standard pump casing in cast iron, impeller and rotor in stainless steel. VAC 2000 is available with free shaft end and on base plate. 2 different sizes. Pumps supplied with studs and nuts ready for adapting flange. VAC 4000 is available with free shaft end and in close coupled design
23 Self-priming Pumps - Open Impeller Design 10 different sizes. 2 different sizes. The old version of the selfpriming pumps. All pumps have connections with thread. The former K&R pumps which are now sold through DESMI s network.
24 Self-priming Pumps - SA Various material combinations for different applications, e.g. A: Cast iron casing - Bronze impeller B: Cast iron casing - Stainless steel impeller D: Bronze casing - Bronze impeller Different types of drives: On base plate with electric motor On base plate with diesel of petrol engine Close coupled with electric motor (only SA25) Manual friction clutch and V-belt pulley El-magnetic friction clutch and V-belt pulley The old design which still widely sold due to its reliability and sturdy design. All sizes have open impeller and separate wear plate
25 Self-priming Pumps - SA The following max. numbers of revolutions are allowed for SA-pumps with full impeller diameter: Pump Max. Number of Pump Max. Number of Revolutions Revolutions SA-20-90/ RPM SA / RPM SA / RPM SA / RPM SA / RPM SA / RPM SA / RPM SA / RPM SA / RPM SA /32 235/32, RPM SA / RPM * SA / RPM SA / RPM SA / RPM SA / RPM * SA /8 is, however, allowed to run at max RPM when used as a fire pump.
26 Self-priming Pumps - SA The following working pressures are allowed: PUMP SA SA SA SA SA /6-8 SA /17 PRESSURE [bar] PUMP SA SA SA SA SA SA PRESSURE [bar] The above-mentioned max. working pressure is NOT valid for pumps approved by a classification society. Pumps approved by classification societies have been pressure tested according to the requirements of these societies, i.e. a test pressure of 1.5 x the permissible working pressure. The test pressure is stated in the test certificate and stamped into the discharge flange of the pump.
27 Self-priming Pumps - SAN/SAEN Various material combinations for different applications, e.g. A: Cast iron casing - Bronze impeller C: Cast iron casing - Cast iron impeller D: Bronze casing - Bronze impeller SAEN pumps are always close coupled without bearing in the pump. SAN pumps are with free shaft end. SAEN pumps are only available with the motor sizes mentioned in the dimensional drawings. 2 different sizes. The former K&R pumps which are now offered through DESMI s network. Open impeller and separate wear plate. Max. working pressure: 4 bar Cost-effective pumps.
28 Horizontal Centrifugal Pumps The dimensions of the pump casing is in accordance with DIN Pump casing is special for this pump, all other parts are identical with parts used in Modular S pumps. 6 different sizes. 6 different sizes. Pumps with dimensions as the German Water Pump Norm - DIN Close coupled version.
29 Portable Diesel Driven Fire & Bilge Pumps Standard materials: Casing - seawater resistant aluminium Impeller and wear plate - stainless steel Shaft - stainless steel Diesel engines: 1B kw at 3600 RPM 1B kw at 3600 RPM Options: Always with recoil start - electric start is optional. 1 size - type SA50T. Lightweight portable fire pumps kg dry weight. Also available with priming star wheel which ensures quick and safe priming. The priming time at 4 metres suction head and 2 suction hose is approx. 20 seconds. Available in watertight aluminium box with hoses.
30 Portable Diesel Driven Fire & Bilge Pumps Materials for S : A: Cast iron casing - NiAluBronze impeller D: Bronze casing - NiAluBronze impeller Materials for SA50-180/8: A: Cast iron casing - Bronze impeller B: Cast iron casing - Stainless steel impeller D: Bronze casing - Bronze impeller S /-11 is with a priming star wheel to ensure fast and secure priming litres of air is evacuated per hour. S /-11NB 11NB with Ruggerini diesel engine type MD kw at 3600 RPM Weight: 155 kg dry. SA50-180/8NB with Lister diesel engine type LT1-5 kw at 3000 RPM Weight: 140 kg dry S / with Ruggerini diesel engine has recoil and electric start.
31 Fuel pumps Standard materials: Casing - Aluminium Impeller and wear plate - Stainless steel Shaft - Stainless steel Preferred engines: HATZ diesel engine type 1B30 with recoil start and electric start with external power supply. DESMI FHS in England has a comprehensive range within fuel handling pumps. Available in different sizes with petrol or diesel engines. Specially designed for pumping of jet fuel. Engine also runs on jet fuels.
32 DESMI ROTAN Pumps 7 different sizes. 3 different sizes (the smallest 11 different sizes. General Purpose pumps in cast iron for clean, non- abrasive liquids. sizes). Close Coupled pumps in cast iron. Heavy Duty pumps in cast iron for viscous, non-corrosive liquids. NEW: Available in vertical design
33 DESMI ROTAN Pumps 11 different sizes. 9 different sizes in various 11 different sizes. Chemical Duty pumps in stainless steel, for corrosive liquids. materials. (Cast iron, carbon steel and stainless steel). Magnetically coupled pumps for ultimate protection against leakage. Recommended for fuel oils. Petrochemical Duty pumps in carbon steel for refinery and petrochemical applications.
34 Special Pumps Available with hydraulic motor Available with hydraulic motor only. only. Handles heavy oil, up to 1 mio. cst. Handles heavy oil, up to 1 mio. cst.
35 Cargo Pumps Deepwell multi-stage cargo Horizontal version of the Single stage booster pump, pumps primarily for LPG/LEG, Ammonia, Molten Sulphur, Acids etc. cargo for dry mounting. On base plate with electric available in horizontal or vertical design. DESWELL cargo pumps are with electric motor placed on the deck. motor.
Upompe Primeflo XP7 chemical self-priming centrifugal pumps
Upompe Primeflo XP7 chemical self-priming centrifugal pumps 1 Design Introduction: These Upompe Primeflo XP7 self-priming pump are heavy-duty design for rugged application and constructed to handle corrosive,
More informationCombiChem Centrifugal pumps. according to ISO 5199 and ISO 2858 / EN (DIN 24256)
CombiChem Centrifugal pumps according to ISO 5199 and ISO 2858 / EN 22858 (DIN 225) CombiChem No limits to reliability! CombiChem is Johnson Pump s solution for liquid transport in the chemical industry.
More informationCombiBloc Close-coupled centrifugal pumps
CombiBloc Close-coupled centrifugal pumps CombiBloc CombiBloc is the premier solution for pumping clean thin liquids in a very cost-effective way. The pump is part of Johnson Pump s Combi-system, a modular
More informationEnd-Suction Centrifugal Pump
GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM
More informationEnd-Suction Centrifugal Pump
GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM
More informationCombiPrime Self-priming centrifugal pumps
CombiPrime Self-priming centrifugal pumps CombiPrime Self-priming centrifugal pumps CombiPrime is a series of self-priming centrifugal pumps, suited for pumping clean or slightly polluted liquids, with
More informationCombi Modular System. Standardised centrifugal pumps EN 733 ISO 2858 ISO 5199 API 610
Combi Modular System Standardised centrifugal pumps EN 733 ISO 2858 ISO 5199 API 610 SPX FLOW Johnson Pump brand water, chemical and petrochemical standardised pumps represent a range of centrifugal pumps
More information1 of 68. Thong Fatt Jaya Machinery Hardware Sdn. Bhd. DOUBLE-STAGE LIQUID RING VACUUM PUMP. Air- Operated Double Diaphragm Pump TW Series
Thong Fatt Jaya Machinery Hardware Sdn. Bhd. DOUBLE-STAGE LIQUID RING VACUUM PUMP Air- Operated Double Diaphragm Pump TW Series STLONG VARIABLE SPEED BOOSTER PUMP SYSTEM & EQUIPMENT 1 of 68 Fire-Fighting
More informationCentrifugal Pumps acc. to EN / ISO 2858 with Shaft Sealing Type NCL
Centrifugal Pumps acc. to EN 22858 / ISO 2858 with Shaft Sealing Type NCL General The DICKOW centrifugal pump acc. to EN 22858 / ISO 2858 is designed for handling liquids in the chemical and petrochemical
More informationHTM Circulation Pumps acc. to DIN EN 733 Type NKX
HTM Circulation Pumps acc. to DIN EN 733 Type NKX General The new NKX pump line replaces our former heat transfer oil circulation pump type NKL s. The outer dimensions of both pump types are identical
More informationLN series STERLING PUMPS. Horizontal Split Case Pumps. Double Volute. Single Stage.
LN series Horizontal Split Case Pumps Double Volute. Single Stage www.sterlingpumps.com.au LN series Sizes: 6 to 42 Capacity to 12,500 m³/h Heads to 190 metres A rugged, single stage, double volute horizontal
More informationdp pumps the dynamics of water HVAC centrifugal (norm) pumps
dp pumps the dynamics of water HVAC centrifugal (norm) pumps 2 HVAC centrifugal (norm) pumps HVAC efficient solutions for comfortable living conditions To be comfortable in a building, both at home and
More informationPAPANTONATOS. We supply clean water and remove waste water. P u m p s s e r v ic e & e n g i nee r in g. submersible pumps. s e w a g e p u m p s
PAPANTONATOS P u m p s s e r v ic e & e n g i nee r in g We supply clean water and remove waste water s e w a g e p u m p s submersible pumps The Company QUALITY WHICH REDUCES PUMPING COSTS For over 45
More informationdp pumps the dynamics of water HVAC centrifugal (norm) pumps
dp pumps the dynamics of water HVAC centrifugal (norm) pumps 2 HVAC centrifugal (norm) pumps HVAC efficient solutions for comfortable living conditions To be comfortable in a building, both at home and
More informationSelf-priming centrifugal pumps
Self-priming centrifugal pumps TOUGH TECHNOLOGY experience of a lifetime // innovation for tomorrow High and dry with j self-priming centrifugal pumps J pumps are self-priming centrifugal pumps with open
More informationDS series STERLING PUMPS. Industrial End Suction Pumps ISO/DP
DS series Industrial End Suction Pumps ISO/DP 5199 www.sterlingpumps.com.au DS series Capacities from: Heads from: 340 to 5,680 m3/h (1,500 to 25,000 USPGM) 21 to 106 metres (70 to 350 feet) Power range
More informationGH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM
GH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM The GH Series The GH is Carver s horizontal, end suction pump series for handling water, oils, and chemicals in marine, process, and general
More informationINDUSTRIAL AND MARINE PUMPING SOLUTIONS
INDUSTRIAL AND MARINE PUMPING SOLUTIONS WHEN THE GOING GETS TOUGH THE TOUGH KEEP GOING AND GOING AND GOING AND GOING AND GOING... GILKES PUMPING SYSTEMS PUMPING SYSTEMS INDUSTRIAL AND MARINE PUMPING SOLUTIONS
More informationTECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION The renewed ETN-Lined pumps are singlestage, magnetic driven, centrifugal pumps in closecoupled execution. ETN-Lined pumps are available both inpp+gf and ETFE. The pump casing is
More informationCombiChem. Centrifugal pumps according to ISO 5199 and ISO 2858 / EN (DIN 24256)
CombiChem Centrifugal pumps according to ISO 199 and ISO 88 / EN 88 (DIN 46) The SPX Johnson Pump Combi system is a modular programme of single stage CombiChem No limits to reliability! centrifugal pumps
More informationMCV - MCH - MCHZ Multistage pumps
MCV - MCH - MCHZ Multistage pumps You can put pressure on them! We offer you a range of reliable high-pressure multistage pumps. It includes a series of horizontal pumps, MCH and a series of vertical pumps,
More informationEngine Room Pumps. Model C2G. Pump Systems
Engine Room Pumps Model C2G Pump Systems C2G centrifugal pumps Hamworthy has more than 100 years experience in design and manufacturing of centrifugal pumps for the marine industry. Following the great
More informationSPRINKLER SYSTEM SOLUTIONS. Water-based Fire-Fighting Sprinkler System PROVEN TECHNOLOGY
SPRINKLER SYSTEM SOLUTIONS Water-based Fire-Fighting Sprinkler System PROVEN TECHNOLOGY FIRE PUMPS DESMI offers dimensioning and guidance when complete units for fire protection, including electronic control,
More informationKRAL Screw Pumps. L Series.
KRAL Screw Pumps. L Series. Our new Medium Pressure Pump The new L pump makes life easier sturdy, with a low wear rate and easy to maintain. How the L pump fits into the KRAL product Applications. range.
More informationCombiBloc. Close-coupled centrifugal pumps
CombiBloc Close-coupled centrifugal pumps CombiBloc is the premier solution for pumping clean thin liquids in a very cost-effective way. The pump is part of SPX FLOW 's Johnson Pump brand Combi-system,
More informationD. NEMA Compliance: Provide electric motors and components which comply with NEMA standards.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO. Open Impeller ASME (ANSI) B73.1 Pump for continuous use in Chemical Process Services
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO Open Impeller ASME (ANSI) B73.1 Pump for continuous use in Chemical Process Services Horizontal Split Case For more than 6 years the name Ruhrpumpen
More informationFull-line Product Overview
Full-line Product Overview End Suction Centrifugal Pumps This general purpose pump can be configured in frame-mounted and close-coupled, semi-open and enclosed impeller configurations. They are available
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS Catalog Ruhrpumpen offers a wide range of standard pump designs and sizes providing energy efficient solutions for the vast majority
More informationMultifunction pump for handling gaseous liquids in process engineering
Multifunction pump for handling gaseous liquids in process engineering Pumping liquids with a high gas content can be problematic, causing sharp losses in head and flow or even total cessation of pump
More informationTitle: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: HVAC Standards
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
More informationCPO N N O V A T I O N E F F I C I E N C Y Q U A L I T Y. ASME/ANSI B73.1 Chemical Process Pump. Springer Pumps, LLC
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO ASME/ANSI B73.1 Chemical Process Pump Tel: 866-777-66 Horizontal Split Case For more than 6 years the name Ruhrpumpen TM has been synonymous worldwide
More informationHorizontal Split Case Pumps Type U
Horizontal Split Case Pumps Type U 7.1 7.2 Stage U Type Pumps Features: Axially Split Case Design Range from 20M 3 /Hr to 600M 3 /Hr Two Stage Pump Single Suction Twin Volute Casing Design Closed type
More informationCentrifugal Pumps acc. to DIN EN ISO 2858 with Shaft Sealing Type NCL
Centrifugal Pumps acc. to DIN EN ISO 2858 with Shaft Sealing Type NCL General The DICKOW centrifugal pump, type NCL, is designed for handling liquids in the chemical and petrochemical industry, in refineries,
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO. ASME/ANSI B73.1 Chemical Process Pump
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y CPO ASME/ANSI B73.1 Chemical Process Pump Horizontal Split Case For more than 6 years the name Ruhrpumpen TM has been synonymous worldwide with innovation
More informationSelfpriming Centrifugal Pumps. Type HZS/HZSA
Selfpriming Centrifugal Pumps Type HZS/HZSA General The selfpriming multistage DICKOW-centrifugal pump is designed for handling hydrocarbons and other volatile liquids. The HZS-type is used in tank farms,
More informationPUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
More informationSIHI LPH-X - Liquid Ring Vacuum Pump One Stage
- Liquid Ring Vacuum Pump One Stage LPH 60527 Pressure Range: Suction Range: 120 to 1013 mbar 200 to 800 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but robust construction with
More informationB. HI Compliance: Design, manufacture, and install pumps in accordance with HI "Hydraulic Institute Standards."
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationPhiloWilke Partnership Addendum No. 2 A/E Project No April 2016
SECTION 23 21 23 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions and Division 01 Specification Sections, apply to this Section.
More information380 Series Multi-Stage Centrifugal Pumps
380 Series Multi-Stage Centrifugal Pumps Flows to: 2,500 GPM Heads to: 2100 Feet Temperatures to: 500+ F TDH - Feet 140 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in
More informationPumps Mixers Aeration Controls Services SCANPUMP SPLIT CASING PUMP Z22.
Pumps Mixers Aeration Controls Services SCANPUMP SPLIT CASING PUMP Z22. SERIES Z22 - WHEN GOOD IS NOT ENOUGH. Since we delivered our first process pumps back in the 1870 s, our goal has been to optimize
More informationIndustrial Pump Solutions
Industrial Pump Solutions azcuepumps the UK agent of zcue azcuepumps zcue Pumps have over 100 years experience in the manufacturing of pumping solutions for applications involving water, chemicals, fuels
More informationA. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 "Building Services Piping.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationMODERN TECHNOLOGIES AND LONG - TERM EXPERIENCE
MODERN TECHNOLOGIES AND LONG - TERM EXPERIENCE SVA ATEX AVAILABLE SELFPRIMING SIDE CHANNEL HORIZONTAL PUMPS SIGMA PUMPY HRANICE, s.r.o. Tovární č.p. 605, 753 01 Hranice I - Město, Czech Republic phone:
More informationPump Program. fluids gases solids. edur.com. Developed and manufactured in Germany... since 1927
Pump Program Developed and manufactured in Germany... since 1927 fluids gases solids edur.com Clean water and energy efficiency both demands are relevant for the future which cannot be managed without
More informationSelf-priming centrifugal pumps
Self-priming centrifugal pumps TOUGH TECHNOLOGY experience of a lifetime // innovation for tomorrow High and dry with j self-priming centrifugal pumps J pumps are self-priming centrifugal pumps with open
More informationMODEL 652A MODEL 654A MODEL 652A MODEL 653A MODEL 651A AURORA. 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS
MODEL 652A MODEL 654A MODEL 652A MODEL 651A MODEL 653A AURORA 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS WWW.AURORAPUMP.COM 2 AURORA 650 Series Single Stage Solids Handling Pumps Capacities to 2000
More informationSIHI LPH-X - Liquid Ring Vacuum Pump One Stage
- Liquid Ring Vacuum Pump One Stage LPH 50523 Pressure Range: Suction Range: 120 to 1013 mbar 70 to 500 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but robust construction with
More informationGoulds 3600 Between-Bearing, Axially-Split, Multi-Stage Pumps. Goulds Pumps
Between-Bearing, Axially-Split, Multi-Stage Pumps Goulds Pumps A Leader in API Engineered Pump Package Solutions Proven API Leadership ITT Goulds Pumps is a proven leader in API Pumps Over 18,000 units
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS Catalog More Than 60 Years Developing The Pumping Technology That Drives Progress Engineering Excellence Ruhrpumpen is an innovative
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y LS BARGE PUMP. Vertical high-flow pump
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y LS BARGE PUMP LS BARGE For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology
More informationTorqueflow Sydex. Fluid Management. K Range Pumps
Torqueflow Sydex Fluid Management K Range Pumps The extremely popular K-range is a heavy-duty robust industrial pump designed for a wide range of applications throughout a multitude of industries. Available
More informationTECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION pumps are Hi-Tech single stage, horizontal centrifugal pumps with magnetic driven coupling. In compact and silent close-coupled execution, they can be mounted on to B5 frame motors.
More informationDNJ SERIES PUMPS END SUCTION CLOSE COUPLED
DNJ SERIES PUMPS END SUCTION CLOSE COUPLED DNJ SERIES PUMPS These are close coupled with standard JM solids shaft ball bearing motors specially designed for pump applications in accordance with standards
More informationROWA -HP High-Pressure Centrifugal Pump
ROWA -HP High-Pressure Centrifugal Pump 2 Pump Type ROWA -HP Quality through Experience Fields of Application Handling of clean to slightly contaminated corrosive liquids up to discharge pressures of 100
More informationSIHI multi Modular multistage pumps
SIHI multi Modular multistage pumps STERLING FLUID SYSTEMS GROUP Backed by its 70 years of application and manufacturing knowledge in the field of ringsection multistage pumps, Sterling Fluid Systems has
More informationRuhrpumpen Fire Systems
FIRE SYSTEMS RP FIRE SYSTEMS Ruhrpumpen Fire Systems Fire pumps play a vital role as the first response to a fire situation, saving countless lives and property from destruction. They are usually found
More informationour contribution for Sealless Magnetic Coupled, Heavy Duty Side-Channel Pumps environmental protection Type SCM PN40
Sealless Magnetic Coupled, Heavy Duty Side-Channel Pumps our contribution for environmental protection Type SCM PN40 General The DICKOW-pump, type SCM, is a selfpriming horizontal side-channel pump with
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y. In-Line Pumps IIL / IVP / IVP-CC
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y In-Line Pumps IIL / IVP / IVP-CC For more than 0 years the name Ruhrpumpen TM has been synonymous worldwide with innovation and reliability for pumping
More informationETP Series - Self Priming Pumps
ETP Series - Self Priming Pumps ETP SERIES Decades of experience in development & manufacturing of injection Moulded Polypropylene Corrosion Resistant Pumps. Design philosophy is to design pumps that are
More informationCR A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR32--2 A-F-A-E-HQQE 3x/69 5 HZ Grundfos pump 9612212 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/9612212/cr-32--2-a-f-a-e-hqqe.html
More informationSL S.S.N.51D
GRUNDFOS DATA BOOKLET SL1.8..265.2.52S.S.N.51D Grundfos Pump 9814549 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/seslfam/9814549/sl1-8--265-2-52s-s-n-51d.html
More informationPRODUCT INFORMATION. Liquid ring vacuum pumps Liquid ring compressors. Series LVP
PRODUCT INFORMATION Liquid ring vacuum pumps Liquid ring compressors Series LVP Contents Description Description... 2 Design... 3 Application range... 4 Material and performance range... 5 Functional principle...
More informationCR5-9 A-FGJ-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR5-9 A-FGJ-A-E-HQQE 1x2/24 5HZ Grundfos Pump 96537532 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96537532/cr-5-9-a-fgj-a-e-hqqe.html
More information6-30 Vertical Deep Well. Close Coupled Vertical Turbine Submersible Turbine. Pump Type. Application. Description. Materials
A GORMAN-RUPP COMPANY Pump Type 6-30 Vertical Deep Well Close Coupled Vertical Turbine 6-30 Submersible Turbine Application Agricultural Irrigation, Municipal Water Supply, Industrial Process Water, Golf
More informationIndustrial. Solutions brands you trust. Product Overview
Industrial Solutions brands you trust. Product Overview Industrial Pump Applications Crane & Systems design s the most efficient and economical pumps to serve the large diversity of industrial applications
More informationSewage Pumps. KS - Channel Type Pumps W, WTS - Vortex Type Pumps
Sewage Pumps KS - Channel Type Pumps W, WTS - Vortex Type Pumps Design KS Technical Data Performance Range: m Capacity up to 500m 3 /h (2200USgpm) m Head up to 45m (150feet) m Speed up to 1450rpm Sizes:
More informationPUMP. Horizontal Multi-Stage Pump. Type MS SERIES DIMENSION. Model MSL MSH (2 pole motor drive) APPLICATIONS companion flange (SS) Foot valve
seal Bearing Enclosed Gland packing Sleeve bearing (Lubricant oil) Water cooling jacket Bearing, Stuffing box (81-120 C) seal: External flushing PUMP Suction side JIS10K normal type Discharge side JIS10K
More informationGoulds 3600 Between-Bearing, Axially-Split, Multistage Pumps
Goulds Pumps Goulds 3600 Between-Bearing, Axially-Split, Multistage Pumps motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail
More informationMARLOW PUMPS RECIRCULATION
End suction centrifugal pump line available in both close coupled and frame mounted configurations allow users to meet exactly most flow conditions on commercial pool and waterpark applications. Features
More informationUPZ PUMP POWER FOR TOP PERFORMANCE UNDER
Submersible borehole pump People at KSB we make your world flow round! UPZ PUMP POWER FOR TOP PERFORMANCE UNDER THE TOUGHEST CONDITIONS UPZ is top choice wherever submersible borehole pumps have to satisfy
More information.2 Section Waste Management and Disposal..5 Section Motors, Drives and Guards for Mechanical Systems.
Issued 2006/08/01 Section 15131 Pumps Hydronic Systems Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal.3 Section 01780
More informationRotodynamic Pumps INTRODUCTION:
Rotodynamic Pumps INTRODUCTION: Liquids have to be moved from one location to another and one level to another in domestic, agricultural and industrial spheres. The liquid is more often water in the domestic
More informationExcellent Engineering Solutions. Solids Handling Pumps. Recessed Vortex Impeller Pumps CLEAR LIQUID
Solids Handling Pumps Excellent Engineering Solutions Recessed Vortex Impeller Pumps CLEAR LIQUID The Vortex Principle The VORTEX technique developed by WEMCO is based on the principle of a whirlpool :
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y HVN. Double Suction, Heavy Duty API 610 Process Pump (BB2)
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y HVN For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology The Ruhrpumpen range
More informationHeavy Duty Process Pumps API 610/ISO 13709
TM.P. S.p.A. Termomeccanica Pompe Heavy Duty Process Pumps API 610/ISO 13709 Termomeccanica Group Tradition, technology & innovation TM.P. S.p.A - Termomeccanica Pompe belongs to Termomeccanica S.p.A,
More informationCORNELL PUMP COMPANY REFRIGERATION EFFICIENT BY DESIGN
CORNELL PUMP COMPANY REFRIGERATION EFFICIENT BY DESIGN CLEAR LIQUID ENERGY EFFICIENT PUMPS As energy costs rise, conservation and efficiency of operation become critical issues for end users striving to
More informationGoulds Large Capacity, Single Stage, Double Suction Pump
Goulds 3498 Large Capacity, Single Stage, Double Suction Pump 3498 Double Suction Pumps Designed for a Wide Range of Heavy Duty Industrial, Marine and Power Generation Services Capacities to 8,00 m 3 /h
More information380 Series Multi-Stage Centrifugal Pumps
380 Series Multi-Stage Centrifugal Pumps Flows to: 4,800 GPM Heads to: 2100 Feet Temperatures to: 500 F TDH - Feet 130 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in
More informationFLANGE-MOUNT CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES GV6 SECTION E PAGE ISSUED /0 REPLACES /0 FLANGE-MOUNT CENTRIFUGAL PUMPS Idel for OEM applications
More informationSubmersible A Series Wastewater Pumps AMX, AV and AK Hydraulic Ranges
Submersible A Series Wastewater Pumps AMX, AV and AK Hydraulic Ranges TM High Performance in Wastewater Pumping HOMA submersible water and wastewater pumps operate worldwide in numerous domestic, municipal
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y SMF. Vertical Submersible Pump
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y SMF Engineering Excellence More Than 60 Years Developing The Pumping Technology That Drives Progress Ruhrpumpen is an innovative and efficient pump technology
More informationDomestic Pump Condensate Transfer Equipment
Bulletin S-944L Domestic Pump Condensate Transfer Equipment CONDENSATE RETURN UNITS BOILER FEED UNITS LOW NPSH PUMPS VACUUM HEATING UNITS INDUSTRIAL VACUUM UNITS www.domesticpump.com Condensate Return
More informationMODEL 664A MODEL 662A MODEL 663A MODEL 661A AURORA. 660 Series SINGLE STAGE SOLIDS HANDLING VORTEX PUMPS
MODEL 662A MODEL 664A MODEL 661A MODEL 663A AURORA 660 Series SINGLE STAGE SOLIDS HANDLING VORTEX PUMPS WWW.AURORAPUMP.COM 2 AURORA 660 Series Single Stage Solids Handling Vortex Pumps Capacities to 2600
More informationGoulds Trash Hog. Self-Priming Solids Handling Pumps
Goulds Trash Hog Self-Priming Solids Handling Pumps Goulds Trash Hog Self-Priming Pumps Designed for Toughest Solids Handling Services Capacities to 6000 GPM (1363 m 3 /h) Heads to 140 feet (43 m) Temperatures
More informationCR A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR45-12-2 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos Pump 96122818 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96122818/cr-45-12-2-a-f-a-e-hqqe.html
More informationChoosing the Right Pump
Choosing the Right Pump Pumps are used to move fluid from one destination to another. They come in many different shapes, sizes, and operated by either electric motor, engine, by hand or solar power. They
More informationPRESSURE ASSEMBLIES WITH ONE PUMP
PRESSURE ASSEMBLIES WITH ONE PUMP WATERPRESS / WATERPRESS / The WATERPRESS / and / are booster sets produced with NEWJET self-priming centrifugal pump. They are supplied wired, tested and complete with
More informationTP /4-A-F-A-BQQE 400D 50HZ
GRUNDFOS DATA BOOKLET TP 15-7/-A-F-A-BQQE D 5HZ Grundfos pump 989838 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/989838/tp-15-7--a-f-a-bqqe.html
More informationVRD. Sump pump for polluted liquids
VRD Sump pump for polluted liquids VRD Sump pump for polluted liquids VRD submersible pumps are used for pumping up liquids containing solid particles from a low-lying, fluctuating, liquid level and where
More informationN N O V A T I O N E F F I C I E N C Y Q U A L I T Y
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y Standard Pumps Manufacturing Plants Today Ruhrpumpen is a worldwide company, with a network of global manufacturing plants in different countries and
More informationSECTION STEAM CONDENSATE PUMPS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 23 22 23 STEAM CONDENSATE PUMPS SPEC WRITER NOTES: 1. Delete between // ---- // if not applicable to project. Also delete any other item or paragraph not applicable
More informationCR20-07 A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR2-7 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos pump 965513 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/965513/cr-2-7-a-f-a-e-hqqe.html
More information3020/3120 Series DEMING PUMPS. Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet
3020/3120 Series Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet A Crane Co. Company DEMING PUMPS Introducting Deming 3020/3120 Series End-Suction
More informationCR10-16 A-FJ-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR1-16 A-FJ-A-E-HQQE 3x4D 5 HZ Grundfos Pump 9651222 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9651222/cr-1-16-a-fj-a-e-hqqe.html
More informationSeries SR Compact Centrifugal Mag-Drive Pumps. WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec
WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec Series SR Compact Centrifugal Mag-Drive Pumps Providing environmentally safe sealless, magnetic pumps of the highest quality for over 30
More informationVertical In-line Self-Priming liquid ring Centripetal pump TYPE - STP
investa Vertical In-line Self-Priming liquid ring Centripetal pump TYPE - STP Excellent for handling solvents from the drum and tank farm Low NPSH required Negative suction lift upto 5 mts. Low speed Compact
More informationPumps Mixers Aeration Controls Services SCANPUMP PROCESS PUMPS, BE SERIES. NO-COMPROMISE PUMPING.
Pumps Mixers Aeration Controls Services SCANPUMP PROCESS PUMPS, BE SERIES. NO-COMPROMISE PUMPING. www.scanpump.com PURPOSE-BUILT FOR PULP AND PAPER. 2 In many ways, paper is a wonderfully simple material.
More informationCR A-F-A-V-HQQV 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR9-1-1 A-F-A-V-HQQV 3x4D 5 HZ Grundfos Pump 9612486 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9612486/cr-9-1-1-a-f-a-v-hqqv.html
More information