EEDEN technical data. air conditioning systems FTXS-G2V1B. Indoor units. Split - Sky Air

Transcription

1 EEDEN08-00 technical data FTXS-G2VB Indoor units air conditioning systems Split - Sky Air

2 EEDEN08-00 technical data FTXS-G2VB Indoor units air conditioning systems Split - Sky Air

3 Indoor Units R-40A FTXS-G2VB TABLE OF CONTENTS FTXS-G2VB Features Specifications Technical Specifications Electrical Specifications Dimensional drawing & centre of gravity Dimensional drawing Centre of gravity Piping diagram Wiring diagram Wiring diagram Sound data Sound pressure spectrum Split Sky Air Indoor Units

4 t i y n k 2 r t o 0- i o ld 4 np T- FI Indoor Units R-40A FTXS-G2VB Features B U S V A G S X RS 2 area intelligent eye: air flow is sent to the area in a room where no person is detected Energy saving during stand by mode: reduction of energy from 0W to 2W Weekly timer: allows to program the unit on a weekly basis Flat front panel: its stylish appearance blends easily within any interior décor and is more easy to clean. Comfort mode reassures draught free operation 3D air flow Dual air discharge flow for better air distribution Consumes up to 30% less energy than non-inverter units ECONO mode decreases power consumption so that other appliances that need large power supply can be used Indoor / outdoor unit silent operation Powerful mode can be selected for rapid cooling or heating Reaches set temperature more quickly Titanium apatite photocatalytic air purification filter absorbs microscopic particles, decomposes odours and even deactivates bacteria and viruses optional 5 steps standard (integrated titanium apatite) 2 Split Sky Air Indoor Units

5 2 Specifications Indoor Units R-40A FTXS-G2VB 2- TECHNICAL SPECIFICATIONS FTXS20G2VB FTXS25G2VB FTXS35G2VB FTXS42G2VB FTXS50G2VB Casing Colour White Dimensions Packing Height mm Width mm Depth mm Unit Height mm Width mm Depth mm Weight Unit kg Packed Unit kg Heat Dimensions Length mm Exchanger Nr of Rows Fin Pitch mm Nr of Stages Tube type ø6.35 Hi-XU Fin Type ML fin (Multi louvre) Fan Type Cross flow fan Air Flow Rate Cooling High m³/min Medium m³/min Low m³/min Silent m³/min High m³/min Medium m³/min Low m³/min Silent m³/min Cooling High cfm Medium cfm Low cfm Silent cfm High cfm Medium cfm Low cfm Silent cfm Fan Motor Model KFD A Number of steps 5 steps, silent and auto Motor Speed High rpm,50,50,370,30,390 (cooling) Medium rpm ,090,70,230 Low rpm ,020,060 Silent rpm Speed High rpm,200,220,370,40,440 (heating) Medium rpm,030,030,60,230,270 Low rpm ,050,090 Silent rpm ,000 Fan Motor Output W (high) Cooling Sound Power High dba Sound High dba Pressure Medium dba Low dba Silent dba Split Sky Air Indoor Units 3

6 2 Specifications Indoor Units R-40A FTXS-G2VB 2 2- TECHNICAL SPECIFICATIONS FTXS20G2VB FTXS25G2VB FTXS35G2VB FTXS42G2VB FTXS50G2VB Sound Power High dba Sound High dba Pressure Medium dba Low dba Silent dba Refrigerant Type R-40A Piping Liquid (OD) Diameter mm connections (OD) Gas Diameter mm (OD) Drain Diameter mm (OD) Heat Insulation Both liquid and gas pipes Air Filter Removable/washable/Mildew proof Air direction control Right, Left, Horizontal, Downward Temperature control Microcomputer control Standard Item Titanium apatite photocatalytic air purification filter Accessories Quantity Item manual Quantity Item Installation manual Quantity Item Wireless remote control Quantity Item Batteries Quantity Item Remote control holder Quantity Item Indoor unit fixing screws Quantity Item Mounting plate Quantity 2-2 ELECTRICAL SPECIFICATIONS FTXS20G2VB FTXS25G2VB FTXS35G2VB FTXS42G2VB FTXS50G2VB Power Supply Name V Phase ~ Frequency Hz Voltage V Current Nominal Cooling A running current (RLA) A Wiring connections For Power Supply Quantity Split Sky Air Indoor Units

7 Indoor Units R-40A FTXS-G2VB 3 Dimensional drawing & centre of gravity 3 - Dimensional drawing FTXS20-42G Left Rear The mark ( ) shows piping direction Right Including mounting plate Air flow (Indoor) 30 Min Space for performance 3 3 Front panel fixed screws (inside) 50 Min Space for maintenance Name plate Terminal block with earth terminal REQUIRED SPACE 50 Min Space for maintenance Bottom Flaps Signal transmitter Signal receiver Model name plate Up/down (Automatic) Cooling, dry Intelligent eye sensor lamp Timer lamp Intelligent eye lamp Indoor unit ON/OFF switch Room temp. thermistor (Inside) BLADE ANGLES Fan Gas pipe Ø9.5 CuT (The length of pipe outside the unit: about 350) Liquid pipe Ø6.4 CuT (The length of pipe outside the unit: about 400) Drain hose (Connecting part I.D. Ø4 O.D. Ø8 The hose length of outside the unit is approx. 465) INFRARED REMOTE CONTROL (ARC452A3) FTXS50G The mark ( ) shows piping direction Right/left (automatic) Air flow (Indoor) Wall hole for embedded piping Ø65 hole STANDARD LOCATIONS OF WALL HOLES Wall hole Ø65 hole 3D05899 Rear Left Right Including mounting plate 30 Min Space for performance Front panel fixed screws (inside) 50 Min Space for maintenance Name plate Terminal block with earth terminal REQUIRED SPACE 50 Min Space for maintenance Bottom Flaps Signal transmitter Signal receiver Model name plate Up/down (Automatic) Cooling, dry Intelligent eye sensor lamp Timer lamp Intelligent eye lamp Indoor unit ON/OFF switch Room temp. thermistor (Inside) BLADE ANGLES Fan Gas pipe Ø2.7 CuT (The length of pipe outside the unit: about 350) Liquid pipe Ø6.4 CuT (The length of pipe outside the unit: about 400) Drain hose (Connecting part I.D. Ø4 O.D. Ø8 The hose length of outside the unit is approx. 465) INFRARED REMOTE CONTROL (ARC452A3) Right/left (automatic) Wall hole for embedded piping Ø65 hole STANDARD LOCATIONS OF WALL HOLES Wall hole Ø65 hole 3D Split Sky Air Indoor Units 5

8 Indoor Units R-40A FTXS-G2VB 3 Dimensional drawing & centre of gravity 3-2 Centre of gravity FTXS20-50G 3 4D Split Sky Air Indoor Units

9 4 Piping diagram Indoor Units R-40A FTXS-G2VB FTXS20-42G 3 6.4CuT INDOOR UNIT 4 Heat exchanger Field piping 6.4CuT Cross flow fan Thermistor on heat exch. Field piping 9.5CuT 9.5CuT Fan motor Refrigerant flow Cooling 4D FTXS50G INDOOR UNIT 6.4CuT Heat exchanger Field piping 6.4CuT Cross flow fan Thermistor on heat exch. Field piping 2.7CuT 9.5CuT Fan motor Refrigerant flow Cooling 4D Split Sky Air Indoor Units 7

10 5 Wiring diagram 5 - Wiring diagram Indoor Units R-40A FTXS-G2VB FTXS20-50G 5 WIRING DIAGRAM FIELD WIRING RECTIFIER OUTDOOR TRANSMISSION CIRCUIT CAUTION Note that operation will restart automatically if the main power supply is turned off and than back on again. INTELLIGENT EYE SENSOR INFRARED REMOTE CONTROL SIGNAL RECEIVER INDOOR FG FU HP~H3P MF MS~M3S PCB~PCB4 RT, R2T S~S49 SW XM : Frame ground : Fuse : Pilot lamp : Fan motor : Swing motor : Printed circuit board : Thermistor : Connector : switch : Terminal switch : Protective earth 3D Split Sky Air Indoor Units

11 Indoor Units R-40A FTXS-G2VB 6 Sound data 6 - Sound pressure spectrum FTXS20G COOLING FTXS20G HEATING 3 6 3D D V 50 Hz Cooling V 50 Hz m m 4 differs with operation and ambient conditions. 4 differs with operation and ambient conditions. FTXS25G COOLING FTXS25G HEATING 3D D V 50 Hz Cooling V 50 Hz m m 4 differs with operation and ambient conditions. 4 differs with operation and ambient conditions. Split Sky Air Indoor Units 9

12 6 Sound data 6 - Sound pressure spectrum Indoor Units R-40A FTXS-G2VB FTXS35G COOLING FTXS35G HEATING 6 3D D V 50 Hz Cooling V 50 Hz m m 4 differs with operation and ambient conditions. 4 differs with operation and ambient conditions. FTXS42G COOLING FTXS42G HEATING 3D V 50 Hz Cooling m 3D V 50 Hz m 4 differs with operation and ambient conditions. 4 differs with operation and ambient conditions. 0 Split Sky Air Indoor Units

13 Indoor Units R-40A FTXS-G2VB 6 Sound data 6 - Sound pressure spectrum FTXS50G COOLING FTXS50G HEATING 3 6 3D D V 50 Hz Cooling m V 50 Hz m 4 differs with operation and ambient conditions. 4 differs with operation and ambient conditions. Split Sky Air Indoor Units

14 Split - Sky Air Daikin s unique position as a manufacturer of air conditioning equipment, compressors and refrigerants has led to its close involvement in environmental issues. For several years Daikin has had the intension to become a leader in the provision of products that have limited impact on the environment. This challenge demands the eco design and development of a wide range of products and an energy management system, resulting in energy conservation and a reduction of waste. Naamloze Vennootschap Zandvoordestraat 300 B-8400 Oostende, Belgium BTW: BE RPR Oostende Daikin Europe N.V. is approved by LRQA for its Quality Management System in accordance with the ISO900 standard. ISO900 pertains to quality assurance regarding design, development, manufacturing as well as to services related to the product. ISO400 assures an effective environmental management system in order to help protect human health and the environment from the potential impact of our activities, products and services and to assist in maintaining and improving the quality of the environment. Daikin units comply with the European regulations that guarantee the safety of the product. Daikin Europe N.V. is participating in the EUROVENT Certification Programme. Products are as listed in the EUROVENT Directory of Certified Products. The present publication is drawn up by way of information only and does not constitute an offer binding upon Daikin Europe N.V.. Daikin Europe N.V. has compiled the content of this publication to the best of its knowledge. No express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its content and the products and services presented therein. Specifications are subject to change without prior notice. Daikin Europe N.V. explicitly rejects any liability for any direct or indirect damage, in the broadest sense, arising from or related to the use and/or interpretation of this publication. All content is copyrighted by Daikin Europe N.V.. EEDEN /2008 Copyright Daikin The present publication supersedes EEDEN07-00 Prepared in Belgium by Lannoo ( a company whose concern for the environmont is set in the EMAS and ISO 400 systems. Responsible Editor: Daikin Europe N.V., Zandvoordestraat 300, B Oostende ÉEEDEN08-00-ËÍ