Belt Driven Mixed Flow Fans
|
|
|
- Delilah Malone
- 5 years ago
- Views:
Transcription
1 Belt Driven Mixed Flow Fans 500 to 1600mm Diameter Bulletin MXF 09-08
2 A product of the latest computerized design techniques, improving upon already proven designs, the MX-PLUS Mixed Flow fan is designed to save the user cost both in terms of energy consumption and a long trouble-free life. Lower operating speed for a given performance level is the key to this feature, and our MX-PLUS delivers! The MX-PLUS features bearing lubrication via extended lubrication lines and an externally adjustable motor base. Leak proof rolled flanges assure the fan s integrity. Shafts and bearings are sized for long and robust service life. While intended for HVAC applications, the MX-PLUS has a heavy-duty construction, which makes it a favourite for industrial applications as well. MXP Mixed Flow.docx Page 2 of 21
3 Mixed Flow MX-P Performance Data MX-P Coverage Chart AMCA 301 Recommended motors based on fan speeds indicted on the chart. MXP Mixed Flow.docx Page 3 of 21
4 MX-P 500mm AMCA 30. Recommended motors based on fan speeds indicted on the chart. MXP Mixed Flow.docx Page 4 of 21
5 MX-P 560mm AMCA 301 Recommended motors based on fan speeds indicted on the chart. MXP Mixed Flow.docx Page 5 of 21
6 MX-P 630mm AMCA 301 Recommended motors based on fan speeds indicted on the chart. MXP Mixed Flow.docx Page 6 of 21
7 MX-P 710mm AMCA 301 Recommended motors based on fan speeds indicted on the chart. MXP Mixed Flow.docx Page 7 of 21
8 MX-P 800mm AMCA 301 Recommended motors based on fan speeds indicted on the chart. MXP Mixed Flow.docx Page 8 of 21
9 MX-P 900mm AMCA 301 Recommended motors based on fan speeds indicted on the chart. MXP Mixed Flow.docx Page 9 of 21
10 MX-P 1000mm AMCA 301 Recommended motors based on fan speeds indicted on the chart. MXP Mixed Flow.docx Page 10 of 21
11 MX-P 1120mm AMCA 301 Recommended motors based on fan speeds indicted on the chart. MXP Mixed Flow.docx Page 11 of 21
12 MX-P 1250mm AMCA 301 Recommended motors based on fan speeds indicted on the chart. MXP Mixed Flow.docx Page 12 of 21
13 MX-P 1400mm AMCA 301 Recommended motors based on fan speeds indicted on the chart. MXP Mixed Flow.docx Page 13 of 21
14 MX-P 1600mm AMCA 301 Recommended motors based on fan speeds indicted on the chart. MXP Mixed Flow.docx Page 14 of 21
15 Dimensions for Sizes MXP Mixed Flow.docx Page 15 of 21
16 MXP Mixed Flow.docx Page 16 of 21
17 Dimensions for Sizes MXP Mixed Flow.docx Page 17 of 21
18 MXP Mixed Flow.docx Page 18 of 21
19 Dimensions for Sizes MXP Mixed Flow.docx Page 19 of 21
20 MXP Mixed Flow.docx Page 20 of 21
21 MX-Plus Advanced Mixed Flow Fans Fans shall be MX-PLUS Advanced Mixed Flow Fans, as manufactured by Howden American Fan Company, Fairfield, Ohio. Fans shall be Arrangement 9, V-belt driven with fixed or adjustable pulleys. The fan impeller shall be mounted on a separate shaft and the bearings supported within a tube centered in the fan casing. Performance Fans shall be tested in accordance with AMCA 210 test code for air moving devices and shall be guaranteed by Howden American Fan Company to deliver rated published performance levels within permitted tolerances. Fans shall be tested in an AMCA-approved laboratory for air and sound performance. Construction Fan casing shall be of welded 10-gauge ASTM A hot rolled steel in sizes 50 through 90 and 7- gauge hot rolled steel in sizes 71 through 125. The casing joints shall be continuously welded. Drilled inlet and outlet flanges are standard and shall be integrally rolled or solid welded to insure a leak-proof casing. Furnish an inspection port in the casing to observe fan rotation. Guide Vanes Fan casing shall be fitted with aerodynamically designed stationary straightening guide vanes on the discharge side of the impeller. Vane design shall be integrated with casing design so as to maximize airstraightening effect. Vanes shall be precisely located and welded to both the fan casing and the bearing housing and act to straighten the tangential component of the air movement downstream of the impeller blades, thereby converting rotational energy losses to pressure, improving efficiency and static pressure capability and reducing power requirements. Impeller Impeller shall be made of fabricated steel of all welded construction. Fan impeller shall be designed by means of Computational Fluid Dynamics (CFD) software for maximum efficiency. Conversion (guide) vanes shall be matched to impeller design for improved efficiency and decreased noise output. Shaft Shafts shall be AISI 1040 or 1045 cold drawn steel round shapes, accurately turned, ground, polished, and checked for accuracy and straightness. Shaft size shall be selected for the first critical speed of at least 1.25 times the maximum speed. Bearings Bearings shall be heavy duty, grease lubricated, antifriction ball or spherical roller, self-aligning, flange block type and selected for a minimum average bearing life (AFBMAL-50) in excess of 200,000 hours at the maximum load. All bearings shall be provided with prefilled factory extended lubrication lines fitted with grease fittings terminating at the casing exterior. Drive Fans shall be equipped with a (fixed/adjustable) pitch V-belt drive selected to operate at the required RPM. The V-belt drive is to consist of cast iron sheaves and anti-static conducting belts. Drives shall be selected with a ( ) service factor based upon the required motor horsepower of the fan. The complete fan shaft and bearing assembly is mounted within a steel fabricated inner cylinder. Motor Motors for fans shall be manufactured in accordance with current applicable standards of IEEE and NEMA and, where applicable, shall meet at least current EPACT standards for efficiency level. Motors shall be foot-mounted, NEMA standard (ODP, TEFC, Explosion-Proof), continuous duty, ball bearing type with class (B or F) insulation and of cast iron construction when commercially available. Finish The entire fan assembly, excluding the shaft, bearings and impeller, shall be thoroughly cleaned before application of finish coat. Prior to assembly, all steel parts shall be primed and then painted with a finish coat of semi gloss alkyd enamel shall be applied to a dry film thickness of 2.0 mils minimum and oven-dried. Enamel shall be mercury-, lead- and chromate-free. Accessories When specified, accessories shall be provided by Howden American Fan Company to maintain onesource responsibility. Factory Run Test All fans with motors and drives mounted by Howden American Fan Company shall be completely assembled and test run as a unit at the specified operating speed prior to shipment. Records shall be maintained and a written copy shall be available upon request for a minimum of seven (7) years. MXP Mixed Flow.docx Page 21 of 21
22 At the heart of your operations Howden people live to improve our products and services and for over 160 years our world has revolved around our customers.this dedication means our air and gas handling equipment adds maximum value to your operations. We have innovation in our hearts and every day we focus on providing you with the best solutions for your vital operations. Howden American Fan Company 2933 Symmes Rd Fairfield OH Tel: Fax: Howden Group Limited. All rights reserved Howden and the flying H logo are registered trademarks belonging to Howden Group Limited
Evase Vaneaxial Fans 500mm to 1400mm Diameter Bulletin ECA 10-07
www.howden.com Evase Vaneaxial Fans 500mm to 1400mm Diameter Bulletin ECA 10-07 Evase Vaneaxial fans by Howden can save energy over the installed life of the system by recovering the kinetic energy contained
JM Aerofoil Fans Bulletin JMA60-05
www.howden.com JM Aerofoil Fans Bulletin JMA60-05 Introduction The high performance JM Aerofoil Fan Benefits of the JM Aerofoil Fan include compactness, low cost, high efficiency and rugged design. Availability
Turning Air Into Solutions. TUBEAXIAL PAINT SPRAY BOOTH EXHAUST FANS. Model TCBS
Turning Air Into Solutions. TUBEAXIAL PAINT SPRAY BOOTH EXHAUST S Model TCBS CATALOG AX220 May 2013 TubeaxialFans Model TCBS The Twin City Fan & Blower model TCBS is a belt driven tubeaxial fan that is
A. Codes and Standards that are Standard at the University:
PART 1: GENERAL 1.01 Purpose: 1.02 References: 1.03 Requirements: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The
High Plume Blowers Suggested Specification Section (Master Format 1996) Suggested Specification Section (Master Format 2004)
High Plume Blowers Suggested Specification Section 15500 (Master Format 1996) Suggested Specification Section 23 38 16 (Master Format 2004) PART 1 GENERAL 1.01 WORK INCLUDED High Plume Laboratory Exhaust
SPECIFICATION DELETED SECTION CENTRIFUGAL HVAC FANS
SECTION 23 34 16 CENTRIFUGAL HVAC FANS PART 1 - GENERAL 1.01 RELATED DOCUMENT A. Drawings and general provisions of the contract, including General and Special Conditions and Division 01 Specification
Dean Pump High Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump High Temperature Chemical Process Inline Pumps Series DL Dean Pump Series DL High Temperature Chemical Process Inline Pumps Capacities to 600 GPM (182 m 3 /hr) Heads to 0 feet
Brown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION AIR HANDLING UNITS
SECTION 23 70 00 AIR HANDLING UNITS PART 1. GENERAL 1.1 Section includes air-handling units to 15,000 cfm and accessories. 1.2 Related Sections 1 : A. Division 01 - Brown University Standard for Narragansett
A. Section Common Motor Requirements for HVAC Equipment: Fan motors.
SECTION 233516 - ENGINE EXHAUST SYSTEMS PART 1 GENERAL 1.1 SECTION INCLUDES A. Exhaust fans. B. Ductwork and duct fittings. C. Inlet fittings. D. Accessories. E. Carbon monoxide detectors. 1.2 RELATED
SECTION (15833) - HVAC POWER VENTILATORS
PART 1 GENERAL 1.01 SUMMARY SECTION 23 34 23 (15833) - HVAC POWER VENTILATORS A. Section Includes: 1. Centrifugal Roof Ventilators. 2. Up-blast Roof Exhaust Fans (Kitchen Hood Exhaust). 3. Ceiling-Mounted
1.1 This section applies to air handling units for HVAC Systems.
AIR HANDLING UNITS GENERAL INFORMATION 1.1 This section applies to air handling units for HVAC Systems. DESIGN REQUIREMENTS 2.1 Design Criteria a. The decision to use modular central station air handling
Industrial Fans & Blowers
Industrial Fans & Blowers IN-LINE FANS ADD DIRECT DRIVE TUBEAXIAL FANS FEATURES & BENEFITS Spark resistant, cast aluminum airfoil axial impeller Aerodynamically efficient performance Factory set adjustable
University of Houston Master Construction Specifications Insert Project Name
University of Houston Master Construction Specifications Insert Project Name SECTION 23 82 20 - FANS, AIR INTAKES AND RELIEF VENTS PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract
Fans: Features and Analysis
Technical Development Program COMMERCIAL HVAC EQUIPMENT Fans: Features and Analysis PRESENTED BY: Michael Ho Version 1.2 Menu Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7 Section
Construction Standards Page Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA
Construction Standards Page 233423-1 Copyright 2009 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified
AIR HANDLING UNITS Vibration Isolation Air Filtration Equipment Ductwork.
SECTION 15855 AIR HANDLING UNITS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15240 - Vibration Isolation. 2. 15885 - Air Filtration Equipment. 3. 15890 - Ductwork. 1.02 REFERENCES A. Air Moving
we make air move Double Inlet Centrifugal Fans (Forward Curved) FBD Series (Square Outlet Metric Size)
we make air move Double Inlet Centrifugal Fans (Forward Curved) FBD Series (Square Outlet Metric Size) www.blowtech.in we make air move Blowtech Air Devices Pvt. Ltd. was founded in 1988 and quickly established
UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 233423 - HVAC POWER VENTILATORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Provisions of the Contract and of the Contract Documents apply to this Section. 1.2 PERFORMANCE REQUIREMENTS A. Operating
DS series STERLING PUMPS. Industrial End Suction Pumps ISO/DP
DS series Industrial End Suction Pumps ISO/DP 5199 www.sterlingpumps.com.au DS series Capacities from: Heads from: 340 to 5,680 m3/h (1,500 to 25,000 USPGM) 21 to 106 metres (70 to 350 feet) Power range
KINGS COUNTY JAIL EXPANSION PHASE III COUNTY OF KINGS SECTION
SECTION 237433, PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to
DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION EXHAUST FANS
PART 0 A/E INSTRUCTIONS 0.01 DESIGN REQUIREMENTS A. Placement within a mechanical room is required for all major mechanical equipment. Only small units may be roof-mounted, and shall be made as inconspicuous
Bulletin FH05 FUME EXHAUST
Bulletin FH05 FUME EXHAUST Models: FH, FHL Curb Mounted Centrifugal Fans Fume Exhaust Systems - FH/FHL Introduction The PennBarry FH fans are designed to meet the various requirements for fume exhaust
Axial flow fan AXICO ANTI-STALL
Product data sheet: AXICO ANTI-STALL Axial flow fan AXICO ANTI-STALL Model FPAC and FPMC axial flow fans with controllable pitch blades. Air flow range: 3-110 m³/s (10.000 400.000 m³/h). Pressure rise:
Wilo IL Vertical Split-Coupled Inline Pumps
Wilo IL Vertical Split-Coupled Inline Pumps Vertical Inline Split-Coupled, Single Stage Pumps March, 2013 Marcos D. Roimicher, Product Manager BS Market Segment, Product Management Department 120-08-002-0313
PhiloWilke Partnership Addendum No. 2 A/E Project No April 2016
SECTION 23 21 23 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions and Division 01 Specification Sections, apply to this Section.
MARLOW PUMPS RECIRCULATION
End suction centrifugal pump line available in both close coupled and frame mounted configurations allow users to meet exactly most flow conditions on commercial pool and waterpark applications. Features
Selecting the Correct Fan
Selecting the Correct Fan Ryan B. Johnson Air Purification Company Sales Engineer Member, ASHRAE Pikes Peak Chapter rjohnson@airpurificationcompany.com 1 Your Speaker circa 1998 Fan Types Applications
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
A. Section includes Factory Packaged, Modular units, providing cooling and heating for air distribution systems.
15855 AIR HANDLING UNITS SPECIFIER: CSI MasterFormat 2004 number: 237313 PART 1 GENERAL 1.1 SUMMARY A. Section includes Factory Packaged, Modular units, providing cooling and heating for air distribution
Modular Supply Make-Up Air Unit
Modular Supply Make-Up Air Unit Model MSX Flexible Design Factory Assembled Heating Options Hot Water Steam Electric Cooling Options Evaporative Direct Expansion Chilled Water November 2009 Product Features
A. Operation and Maintenance Data: For pumps to include in emergency, operation, and maintenance manuals.
SECTION 23 21 23 - HYDRONIC PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
Centrifugal Blower. Backward/Aerofoil Curved.
Centrifugal Blower Backward/Aerofoil Curved www.humidin.com Centrifugal Blower Backward/Aerofoil Curved When Quality Speaks For Itself As a leading manufacturer of Centrifugal Blower Backward/Aerofoil
SECTION STEAM CONDENSATE PUMPS
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 23 22 23 STEAM CONDENSATE PUMPS SPEC WRITER NOTES: 1. Delete between // ---- // if not applicable to project. Also delete any other item or paragraph not applicable
ENVIRO UNIT ENGINEERING MANUAL KES SERIES
ENVIRO UNIT ENGINEERING MANUAL KES SERIES The Cadexair INC. Enviro System (KES) and Recirculation System (KRS) have been designed and constructed specifically for a commercial kitchen exhaust. The units
SECTION PACKAGED ROOFTOP AIR CONDITIONING UNITS
SECTION 15732 - PACKAGED ROOFTOP AIR CONDITIONING UNITS PART 1 - GENERAL 1.1 SECTION INCLUDES A. Package roof top unit. B. Heat exchanger. C. Refrigeration components. D. Unit operating controls. E. Roof
B. HI Compliance: Design, manufacture, and install pumps in accordance with HI "Hydraulic Institute Standards."
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Propeller Fans. Industrial And Commercial Fans Belt And Direct Drive. Your Clean Air Source!
Propeller Fans Industrial And Commercial Fans Belt And Direct Drive Your Clean Air Source! MODEL PVL EXHAUST FANS Application Economical fans for use in kitchens, laundries, taverns, bakeries and also
DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION PUMPS
PART 0 A/E INSTRUCTIONS 0.01 Design Requirements A. Pumping system design 1. A primary-secondary pumping system is preferred. Redundant pipes are required for chillers and boilers. 2. Select pumps to operate
A. This Section includes air-handling units with coils for indoor installations.
SECTION 237313 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes air-handling units with coils for indoor installations. 1.2 SUBMITTALS A. Product Data: For each type of indoor air-handling unit
Jethwa Automatic Can Equip. Co. An Export Award Winning ISO 9001 Quality Certified Company
200-220 LITRES DRUM BARREL PLANT MACHINES INTRODUCTION The complete range of semi-automatic machinery and equipments for producing drum barrel and buckets in various ranges for packing edible oil, paint,
DLKF. EBARA Submersible Sewage Pumps Specifications Project: Model: Chk d: Date:
DLKF A. General: Provide submersible sewage pumps suitable for continuous duty operation underwater without loss of watertight integrity to a depth of 65 feet. Pump system design shall include a guide
Direct Fired Heater Model AD Specification
Direct Fired Heater Model AD Specification Description A Direct-fired gas heating and ventilating unit(s), as indicated on the drawings shall be furnished. Unit(s) shall be tested in accordance with ANSI
Specially Designed Waste Water & Sewage Pumps
Specially Designed Waste Water & Sewage Pumps Technical specifications Ebitt SC series consists of centrifugal sewage and waste water pumps. They are used for pumping muddy liquids like sewage and other
MCF 500 CENTRIFUGAL FAN FOR AIR, FOR BIOGAS, LANDFILL AND NATURAL GAS
MCF 00 CENTRIFUGAL FAN FOR AIR, FOR BIOGAS, LANDFILL AND NATURAL GAS MCF 00 CENTRIFUGAL FAN FOR COMBUSTIBLE GASES MCF 00 centrifugal fan for biogas, natural gas or combustible gases, in conformity to the
Modular Heating & Ventilating Unit Model IGX-HV
Modular Heating & Ventilating Unit Model IGX-HV Indirect Gas-Fired Heating Evaporative Chilled Water DX Cooling October 2008 Product Features Model IGX-HV Indirect Gas-Fired Heating and Ventilating Unit
LN series STERLING PUMPS. Horizontal Split Case Pumps. Double Volute. Single Stage.
LN series Horizontal Split Case Pumps Double Volute. Single Stage www.sterlingpumps.com.au LN series Sizes: 6 to 42 Capacity to 12,500 m³/h Heads to 190 metres A rugged, single stage, double volute horizontal
SECTION XXXXX POSITIVE DISPLACEMENT BLOWER WITH SOUNDSEAL COMPACT ENCLOSURE
SECTION XXXXX POSITIVE DISPLACEMENT BLOWER WITH SOUNDSEAL COMPACT ENCLOSURE PART 1 GENERAL 1.01 SECTION INCLUDES A.) Provide one (1) rotary positive displacement blower and all related appurtenances assembled
MODEL 652A MODEL 654A MODEL 652A MODEL 653A MODEL 651A AURORA. 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS
MODEL 652A MODEL 654A MODEL 652A MODEL 651A MODEL 653A AURORA 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS WWW.AURORAPUMP.COM 2 AURORA 650 Series Single Stage Solids Handling Pumps Capacities to 2000
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL TUBE AXIAL FANS BTA, WTA, HTA, DDA The purpose of this manual is to aid in the proper installation and operation of the fans. These instructions are intended
A. American National Standards Institute (ANSI) : Establishes requirements applicable to certifying direct gas-fired heaters.
Section 15 _ Energy Recovery Air Handling System Part 1: GENERAL 1.1 Section Includes: A. Energy Recovery Air Handler B. Controls (most by Others) C. Equipment Schedule 1.2 Related Sections: A. Section
A Fläkt Woods Company 2933 Symmes Road, Fairfield, Ohio Phone: (513) Fax: (513)
A Fläkt Woods Company 2933 Symmes Road, Fairfield, Ohio 45014-2035 Phone: (513) 874-2400 Fax: (513) 870-6249 JM AEROFOIL FANS Installation, Operation and Maintenance Instructions Site Storage The fan must
Full-line Product Overview
Full-line Product Overview End Suction Centrifugal Pumps This general purpose pump can be configured in frame-mounted and close-coupled, semi-open and enclosed impeller configurations. They are available
SERIES 1600 Quality Design Features Assure Long, Trouble-Free Service
Vortex End Suction SERIES 1600 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Food Processing Solids Waste Water Treatment Pollution Control Slurries Industrial Process
TGIF-1. Indirect Fired Heating Systems. Technical Guide for: IF Indoor Installations. IFW Outdoor Installations. Applied Air. Keeps You.
TGIF- Indirect Fired Heating Systems Technical Guide for: IF Indoor Installations IFW Outdoor Installations Applied Air Keeps You Warm Indirect Fired Heating Systems Technical Guide In the business of
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
DARTMOUTH COLLEGE DESIGN January 3, 2012 & CONSTRUCTION GUIDELINES
SECTION 15856 MODULAR AIR HANDLING UNITS PART 1 DESIGN DIRECTIVES 1.1 QUALITY ASSURANCE A. NFPA Compliance: Modular air handling units and components shall be designed, fabricated, and installed in compliance
CAP SERIES SEWAGE AND WASTE WATER PUMPS
Part 8 CAP SERIES SEWAGE AND WASTE WATER PUMPS TECHNICAL SPECIFICATIONS : Turbosan CAP series consists of centrifugal sewage and waste water pumps. They are used for pumping muddy liquids like sewage and
Title: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: HVAC Standards
Date Description of Change Pages / Sections Modified ID 6/15/16 Entire document - mgl44 PART 1 - INTRODUCTION 1.1 PURPOSE A. This section is intended to define the general installation and minimum product
Vent-Rite. Cast Iron And Steel Receivers. Simplex, Duplex, Triplex And Quadruplex Units. Pump Capacities To 150 GPM. Discharge Pressure To 75 PSI
Vent-Rite BULLETIN VCRV AUGUST 0 GUARDIAN Plus Cast Iron And Steel Receivers Simplex, Duplex, Triplex And Quadruplex Units Pump Capacities To 0 GPM Discharge Pressure To 7 PSI 87 Dewey Avenue Benton Harbor,
B. Unit construction shall comply with ASHRAE 15 Safety Code, NEC, and ASME applicable codes (U.S.A. codes).
Guide Specifications PART 1 GENERAL 1.01 SYSTEM DESCRIPTION Microprocessor controlled, air-cooled liquid chiller utilizing scroll compressors, low sound fans, hydronic pump system and optional fluid storage
UNIVERSITY OF ROCHESTER DESIGN STANDARDS NOVEMBER 1, 2013
SECTION 15800 - AIR HANDLING EQUIPMENT 1.1 GENERAL A. All air handlers installed shall conform to the University of Rochester specification Guideline for Semi-Custom and Pre-Engineered Air Handling Units.
PUMPS AND PROP AGITATORS
PUMPS AND PROP AGITATORS Shown with optional telescoping legs. MAGNUM LAGOON PUMPS Balzer Magnum Lagoon Pump features the Balzer vertical positioned Super 150 Impeller, 19 horizontal prop, patented chopping
D. NEMA Compliance: Provide electric motors and components which comply with NEMA standards.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
University of Delaware
University Contact: Energy & Engineering Group (302) 831-1744 SECTION 23 73 00_AIR HANDLING UNITS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Modular custom & semi-custom built indoor air handling
A. Air-conditioning and Refrigeration Institute (ARI) - Standard 550/590, latest edition, and ARI certification program.
15682 CENTRIFUGAL WATER CHILLERS ************************************************************************************************************* SPECIFIER: CSI MasterFormat 2004 number: 236416 An optional
A. General: Refer to paragraph entitled "SUBMITTAL" in Section Include the following data:
SECTION 15860 - FANS PART 1 - GENERAL 1.01 RELATED DOCUMENT A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS, and Section 15030, ELECTRICAL REQUIREMENTS FOR MECHANICAL
Flygt Top-Entry Agitators CONVENIENT AND EFFICIENT
Flygt Top-Entry Agitators CONVENIENT AND EFFICIENT INTRODUCTION Top energy-efficient performance Advantages of Flygt top-entry agitators Rising to the mixing challenge All mixing applications require varying
KEENER GRINDER PUMPS
KEENER GRINDER PUMPS RDSGP1-2021-50Hz 2 HP Grinder Pump Replacement Grinder Pump Direct Interchangeability Double Mechanical Seal Silicon Carbide (Main) - Grit Resistant Carbon Ceramic (Secondary) Dual
CORNELL PUMP COMPANY MINE DEWATERING WHEN RELIABILITY MATTERS
CORNELL PUMP COMPANY MINE DEWATERING WHEN RELIABILITY MATTERS MINE DEWATERING high efficiency SETTING THE STANDARD Cornell s Redi-Prime pumps are designed and engineered for the most rugged and demanding
Internal ridged board 1" x 1.5 foil face installation shall be installed on roof, walls and base of casing.
A-D WITH MPU SPECIFICATION WRITTEN SPECIFICATION Description A Modular Packaged Heating, Cooling and ventilating unit(s), as indicated on the drawings shall be furnished. Direct Fired Gas Unit(s) shall
SECTION DIRECT GAS-FIRED INDUSTRIAL HEATING AND VENTILATING UNITS
SECTION 237339 - DIRECT GAS-FIRED INDUSTRIAL HEATING AND VENTILATING UNITS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary
Condensate Boiler Feed Water Make-Up
1144 Utica Ave, Brooklyn, NY 1103 July 0 New Catalogue Release Bulletin 9C.01 Low Inlet Condensate Receiver (7 from floor) Close Grained Cast Iron Simplex and Duplex Design To 0,000 SQ-Ft EDR Pump Capacity
MCV - MCH - MCHZ Multistage pumps
MCV - MCH - MCHZ Multistage pumps You can put pressure on them! We offer you a range of reliable high-pressure multistage pumps. It includes a series of horizontal pumps, MCH and a series of vertical pumps,
Contents INDEX. TDM Series Indirect Fired Heaters
Contents Typical Indoor Installations................... 000 Indoor Unit Dimensions (Vertical).............. 000 Indoor Unit Dimensions (Horizontal)............ 000 Outdoor Unit Dimensions.....................
Goulds 3600 Between-Bearing, Axially-Split, Multistage Pumps
Goulds Pumps Goulds 3600 Between-Bearing, Axially-Split, Multistage Pumps motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail
HOMA Pump, Ansonia Connecticut
TM High Performance in HOMA began as a submersible motor manufacturer more than fifty years ago. We expanded into full pump production in the 1960s. Every product we design and manufacture has always exceeded
SECTION AIR HANDLING UNIT
SECTION 15800 - AIR HANDLING UNIT PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Basic Requirements: Provisions of Section 15010, BASIC MECHANICAL REQUIREMENTS, and Section 15030, ELECTRICAL REQUIREMENTS FOR
GH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM
GH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM The GH Series The GH is Carver s horizontal, end suction pump series for handling water, oils, and chemicals in marine, process, and general
4VH and 4VHX. 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction
4VH and 4VHX 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction DURABLE MOTOR WILL DELIVER MANY YEARS OF RELIABLE SERVICE Oil-filled motor for maximum heat dissipation
3020/3120 Series DEMING PUMPS. Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet
3020/3120 Series Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet A Crane Co. Company DEMING PUMPS Introducting Deming 3020/3120 Series End-Suction
Experience In Motion. WXH and WXM Utility-Grade Multistage Ring Section Pumps
Experience In Motion WXH and WXM Utility-Grade Multistage Ring Section Pumps High reliability and performance in rapid-cycling applications The WXH and WXM multistage ring section pumps are specifically
SECTION AIR COOLED WATER CHILLERS
PART 1 GENERAL 1.1 SECTION INCLUDES A. Chiller package B. Charge of refrigerant and oil C. Controls and control connections D. Chilled water connections E. Starters F. Electrical power connections 1.2
HOFFMAN & LAMSON ENGINEERED VACUUM SYSTEMS
HOFFMAN & LAMSON ENGINEERED VACUUM SYSTEMS ENGINEERED VACUUM SYSTEMS FOR INDUSTRIAL APPLICATIONS Anchored in tradition, the Hoffman & Lamson Engineered Vacuum System line-up continues a century long commitment
MXI Mixed Flow Inline Fan
MXI Mixed Flow Inline Fan PRODUCT GUIDE PennBarry Your Single Source for Commercial & Industrial Supply & Exhaust Fans www.pennbarry.com TABLE OF CONTENTS INTRODUCTION 3 CERTIFICATIONS & LISTINGS 4 MIXED
A. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 "Building Services Piping.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Multistage Centrifugal Blowers
Multistage Centrifugal Blowers Multistage Centrifugal Blowers In order to meet all the requirements for air and gas applications, Ingersoll Rand provides a new generation of Hibon Multistage Centrifugal
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
Goulds 3600 Between-Bearing, Axially-Split, Multi-Stage Pumps. Goulds Pumps
Between-Bearing, Axially-Split, Multi-Stage Pumps Goulds Pumps A Leader in API Engineered Pump Package Solutions Proven API Leadership ITT Goulds Pumps is a proven leader in API Pumps Over 18,000 units
568X, 587X, 588X Series
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
HORIZONTAL FIRE TUBE BOILERS Piping (HVAC) Pumping Equipment (HVAC).
SECTION 15555 HORIZONTAL FIRE TUBE BOILERS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15510 - Piping (HVAC). 2. 15540 - Pumping Equipment (HVAC). 1.02 SUBMITTALS A. Submit properly identified
K4RH(X) Solids-Handling Pumps
Solids-Handling Pumps K4RH(X) 4 Submersible, Recessed Impeller (Class 1, Div. 1, Groups C & D Hazardous Location) RECESSED IMPELLER Handles Stringy and Fibrous Materials Passes Large Solids Pumps Heavier
SECTION CUSTOM INDOOR CENTRAL-STATION AIR-HANDLING UNITS For large systems, 50,000 cfm or more.
Page 237323-1 SECTION 237323 - For large systems, 50,000 cfm or more. PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
470 Series Stamped Stainless Steel Pumps
470 Series Stamped Stainless Steel Pumps Flows to: 1100 GPM Heads to: 2000 Feet 130 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in America, are pump products steeped
DUPLEX CONDENSATE TANK SYSTEM
DUPLEX CONDENSATE TANK SYSTEM PROJECT NAME: 7 EAST 54TH STREET CONTRACTOR: PRO PUMP CORP ENGINEER: KEVAN WOODWORTH SUBMITTED BY: NISSIM ISAACSON DATE: 2.20.205 DESIGN DATA Model GPM TDH HP Volt Phase RPM
Worthington CNG process pumps.
Worthington CNG process pumps. Capacity to 5,000 gpm; heads to 475 feet. A proven and reliable pump for corrosive services in chemical, pulp and paper and general industry. Longer lasting, easy to maintain
.2 Section Waste Management and Disposal..5 Section Motors, Drives and Guards for Mechanical Systems.
Issued 2006/08/01 Section 15131 Pumps Hydronic Systems Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal.3 Section 01780
What is a Closed circuit Cooling Tower (CCT)?
What is a Closed circuit Cooling Tower (CCT)? Closed circuit Cooling Towers are hybrids that pass the working fluids through a tube bundle, upon which clean water is sprayer and a faninduced draft applied.
SECTION AXIAL FANS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Sections, apply to this Section. B. Related Sections:
SELF-PRIMING PUMPS CORNELL PUMP COMPANY STX & STL SERIES INDUSTRY LEADING EFFICIENCY WITH CYCLOSEAL SYSTEM EFFICIENT BY DESIGN FIVE-YEAR WARRANTY
CORNELL SELF-PRIMING PUMPS STX & STL SERIES INDUSTRY LEADING EFFICIENCY WITH CYCLOSEAL SYSTEM FIVE-YEAR WARRANTY SELF-PRIMING PUMPS CORNELL Efficient, durable, innovative and dependable are all words that
Guide Spec Summary. Option List. Date: 05/21/2001. EarthWise Modular Climate Changer Full Spec. Prepared by: Phone Number: Prepared for:
Date: 05/21/2001 Time: 08:50:16 AM Job Name: EarthWise Modular Climate Changer Full Spec Location: Any Town, Earth Prepared by: Phone Number: Prepared for: Guide Spec Summary Option List SUBMITTALS Submittals