AMP SUPERSEAL 1.5 SERIES Connectors
|
|
|
- Logan Cameron Joseph
- 5 years ago
- Views:
Transcription
1 Introduction TE Connectivity has developed the MP SUPERSEL 1.5 SERIES Connector family to meet the increasing requirements for reliability and water proofness. MP SUPERSEL 1.5 SERIES Connector exceed the requirements prescribed by IP 67 according IEC and DIN standards and has its application in the automotive, agriculture and industrial machinery. For sensor application the MP SUPERSEL 1.5 SERIES Connector system is qualified as well. dvantages Compact system minimizes packaging requirements Sealing reliability proven under harsh conditions Designed for ease of manual harness assembly, engine mounting and under hood environments pplications Wire-to-Wire (1.5 mm) and ECU applications, under hood or any location where sealing is required Suitable for automotive, truck, bus, or off-road vehicles ll specifications subject to change. Consult TE Connectivity for latest specifications. 28-1
2 Receptacle Contacts Contact Material: CuZn (Tab) CuSn (Receptacle) Contact Finish: tin plated 16.5 Current Carrying Capacity: 14 max. 1.6 Wire Size Range: mm 2 Insulation Diameter: mm FLR Extraction Tool: Part No Product Specification: pplication Specification: mm Receptacle Contacts Wire Size Range (mm 2 ) Insulation Diameter FLK FLR Material and Finish s Strip Loose- pplicator Hand Tool Form Piece CuSn, tin plated , ,000 x x CuSn, tin plated , ,000 x x CuSn, tin plated ,000 x x Note: ll part numbers are RoHS and ELV compliant. ) The pre- and suffix for the applicators depends on the applied termination equipment ll specifications subject to change. Consult TE Connectivity for latest specifications.
3 Tab Contacts Contact Material: CuZn (Tab) CuSn (Receptacle) Contact Finish: tin plated, gold plated 22.7 Current Carrying Capacity: 14 max. 1.5 Wire Size Range: mm 2 Insulation Diameter: mm FLR Extraction Tool: Part No Product Specification: pplication Specification: mm Tab Contacts Wire Size Range (mm 2 ) Insulation Diameter FLK FLR Material and Finish s Strip Loose- pplicator Hand Tool Form Piece CuZn, tin plated , , x x CuZn, gold plated ,000 CuZn, tin plated , , x x CuZn, gold plated , CuZn, tin plated ,000 x x Note: ll part numbers are RoHS and ELV compliant. ) The pre- and suffix for the applicators depends on the applied termination equipment. ll specifications subject to change. Consult TE Connectivity for latest specifications. 28-3
4 Single Wire Seals and Cavity Plugs Made from silicon rubber material For insulation diameters of mm Loose-piece wire seals are crimped simultaneously with the contacts Single Wire Seals and Cavity Plugs Insulation Diameter FLK FLR Color Green , Yellow , Red ,000 Cavity Plugs Red , ll specifications subject to change. Consult TE Connectivity for latest specifications.
5 Plug Housings Plug Housings Utilizes Receptacle Contacts Pitch 6.0 Housing Material: Polyamide 6.6 glass-filled Black (other colors available) Orange (closed cavities) Secondary Lock: Polyamide 6.6 glass-filled Red Sealing: Silicon Rubber Yellow ( ) with secondary lock closed Plug Housings Dimension , , , , , ,400 Plug Housings with Closed Cavities Dimension , , ,500 ll specifications subject to change. Consult TE Connectivity for latest specifications. 28-5
6 Cap Housings Cap Housings Utilizes Tab Contacts Pitch 6.0 lso suitable for panel mount application (see detail X ). Locking clip not manufactured by TE Connectivity Detail X Housing Material: Polyamide 6.6 glass-filled Black (other colors available) Orange (closed cavities) Secondary Lock: Polyamide 6.6 glass-filled Red Extraction Tool for Secondary Lock of Cap Housing: Part No Insertion Tool for Secondary Lock of Cap Housing: Part No for 1 and 2 positions Part No for 3 6 positions Cap Housings Dimension , , , , , ,550 Cap Housings with Closed Cavities Dimension , , , ll specifications subject to change. Consult TE Connectivity for latest specifications.
7 Rubber Boots Rubber Boots Connector Housing Description Rubber Boot Color Plug Housing Cap Housing Plug Housing Cap Housing Black 1, Black 1, D 11,0 B C Dimensional Data Boot Wires Dimensions B C D ) Different Style, see customer drawing. ll specifications subject to change. Consult TE Connectivity for latest specifications. 28-7
8 Engineering Notes 28-8 ll specifications subject to change. Consult TE Connectivity for latest specifications.
AMP SUPERSEAL 1.5 SERIES Connectors
Introduction Tyco Electronics has developed the MP SUPERSEL 1.5 SERIES Connector family to meet the increasing requirements for reliability and water proofness. MP SUPERSEL 1.5 SERIES Connector exceed
Contacts for Econoseal III Connectors Series.070 (1.8 mm) and Series.250 (6.3 mm)
Series.070 (1.8 mm) and Series.250 (6.3 mm) Introduction Tyco Electronics Econoseal III sealed connector range has been designed to meet the exacting requirements of the automotive industry, for a reliable
Printed Circuit Board Connectors
Printed Circuit Board Overview Printed circuit board or PCB connectors are heavy duty environmentally sealed connectors designed for wire-to-circuit board connections. TE Connectivity Industrial & Commercial
RoHS. AMP SUPERSEAL 1.5 Series Connectors. Ready GLOBAL AUTOMOTIVE DIVISION
RoHS Ready AMP SUPERSEAL 1.5 Series Connectors GLOBAL AUTOMOTIVE DIVISION TYCO ELECTRONICS GLOBAL AUTOMOTIVE DIVISION Driver Information Safety Systems Body THE 7 APPLICATION AREAS Convenience Powertrain
Introduction. Technical Features
Introduction Powertrain Systems Chassis Systems Safety Systems Security Body Driver Information Convenience The AMPSEAL 16 Connector System is targeted for off-road and heavy duty industrial applications.
SOLARLOK Interconnection System Installation Manual
SOLARLOK Interconnection System 1. Safety Note! n The SOLARLOK connector is to be used only to interconnect firmly fixed cables. n Do not disconnect under electrical load! n Electrical current path should
Introducing SlimSeal SSL Connector
Introducing SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These connectors provide low power, sealed
Battery Interconnects
Battery Interconnects Product Facts Total interface solution Current capacity 7 Amps/ single contact at 30 C T-Rise Choice of right-angle or vertical mount headers with left, right or keyless polarization
Catalog Issued GLOBAL AUTOMOTIVE DIVISION. Connections for Electrical and Electronic Devices
Catalog 889782 Issued 07-02 GLOBAL AUTOMOTIVE DIVISION Connections for Electrical and Electronic Devices TYCO ELECTRONICS GLOBAL AUTOMOTIVE DIVISION Driver Body THE 7 APPLICATION AREAS Security 1 TYCO
.025 Connector Series
Highlights Automotive connector series: 30 % smaller size than the existing.040 III connectors and designed to resist fretting corrosion. Features.025 Connectors with a full range of product lines..025
GET.64 Interconnection System. RoHS. Ready
GET.64 Interconnection System RoHS Ready TYCO ELECTRONICS GLOBAL AUTOMOTIVE DIVISION THE 5 APPLICATION AREAS 1 INNOVATIVE TECHNOLOGIES Tyco Electronics is the world s largest passive electronic components
SM CONNECTOR. 1Certified LR R Specifications. Standards. 2.5mm pitch/disconnectable Crimp style wire-to-wire connectors
.mm pitch/disconnectable Crimp style wire-to-wire connectors The SM series are.mm pitch, wire-to-wire connectors that perform reliably in high-density, small current applications. High contact pressure
Introducing Hermaphroditic Blade and Receptacle Connector
Introducing Hermaphroditic Blade and Receptacle Connector Wire-to-Board, Board-to-Board and Dust Cover Hermaphroditic Blade and Receptacle Connector : Wire-to-Board KEY FEATURES Available in 2, 4, and
MICRO SWITCH V15W Series Watertight Miniature Switches
MICRO SWITCH V15W Series Watertight Miniature Switches Basic Switches DESCRIPTION The MICRO SWITCH V15W is a standard-sized basic switch designed for harsh-duty, wash down areas. Rugged yet precise, the
Standard and Customized Hand Tool Kits
Standard and Customized Hand Tool Kits Application Tooling and Equipment Portfolio Applicators Board Processing Equipment Crimp Machines and Equipment Equipment for Electrical Testing FFC-FPC Equipment
Maintenance & Operating Instructions
Maintenance & Operating Instructions For Dixon Bayco FloTech FT520 Optic System Tester For Sales and Service Contact USA: Dixon Bayco USA Chestertown, Maryland Phone: 410-778-2000 Fax: 410-778-4702 Toll
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION Brand C.K Product Range Ratchet crimping pliers Catalogue number 3678, 3681, 3682, 3683, 3697, 3698, 3852, 3676 & 3671 Date 17/08/2011 Range Description Professional quality ratchet
MICRO SWITCH Sealed Subminiature Basic Switches ZD Series Issue 4. Datasheet
MICRO SWITCH Sealed Subminiature Basic Switches ZD Series 004988 Issue 4 Datasheet FEATURES Subminiature package size SPDT, SPNC, or SPNO switch options Power-duty switching with silver contacts or logic-level
HPF 1.2 NEW INTERCONNECTION SYSTEM FOR EXTREME VIBRATION REQUIREMENTS IN THE VEHICLE
HPF 1.2 NEW INTERCONNECTION SYSTEM FOR EXTREME VIBRATION REQUIREMENTS IN THE VEHICLE Authors: Stefan Glaser Senior Manager Customer Engineering VWA Waldemar Stabroth Director Technical Marketing Contact:
LOW VOLTAGE HEAT SHRINK JOINTS TECHNOLOGY CONNECTING YOUR NEEDS TO TOMORROW S NETWORKS
ENERGY /// LOW VOLTAGE HEAT SHRINK JOINTS TECHNOLOGY (LVHS JOINTS) LOW VOLTAGE HEAT SHRINK JOINTS TECHNOLOGY CONNECTING YOUR NEEDS TO TOMORROW S NETWORKS TE Connectivity (TE) offers a wide range of reliable
MICRO SWITCH Sealed Subminiature Basic Switches ZD Series Issue 3. Datasheet
MICRO SWITCH Sealed Subminiature Basic Switches ZD Series 004988 Issue 3 Datasheet FEATURES Subminiature package size SPDT, SPNC, or SPNO switch options Power-duty switching with silver contacts or logic-level
Fan-and-filter units 4.3. Features. Fast assembly. Application diversity and functions
Fan-and-filter units Features Fan-and-filter units are ideal for dissipating heat loads costeffectively. The pre-requisite is that the ambient air must be relatively clean and with a temperature below
KIT NOTICE. These instructions are for replacing the three existing thermostats with a single new solid-state thermostat.
KIT 06401-004-22-16 5 1 2 NOTICE 3 (3 PLC'S) These instructions are for replacing the three existing thermostats with a single new solid-state thermostat. 4 PREPARATION PARTS INCLUDED 6 1 7 5 8 2 4 (4
Marathon Special Products
Marathon Special Products Fused Disconnect Switch Specifications 30 amps 600 volts AC Line/Load #4-18 AWG Factory & Field Wiring Minimum indicator voltage 90V-AC Din-Rail mountable on any 35mm wide rail
Parts and Accessories Installation Instructions
Parts and Accessories Installation Instructions 84. 6 97 5- BMW 997 GERMANY e 498 68 + - Handy ON F 46 7 W BMW Motorola V5 / V69 aerial booster BMW Series Coupé, Saloon, touring and compact (E 46///4/5)
Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height mm inch Connector Description
You work hard on your panel. we work hard in your panel. PRODUCTS FOR
You work hard on your panel we work hard in your panel. PRODUCTS FOR 2 PRODUCTS FOR You simply won t find better panel components. Thomas & Betts has everything you need to make your panel better than
COMMERCIAL ELECTRIC DRYER
COMMERCIAL ELECTRIC DRYER MODEL MDE22PNAGW0 1 10 Litho In U.S.A. (BT)(bay) c 2010 WHIRLPOOL CORPORATION Part No. Rev. B TOP AND CONSOLE PARTS WIRING HARNESS PARTS 2 TOP AND CONSOLE PARTS 1 Literature Parts
Look for Service Centres, Point of Sale addresses and other information on: Version: Date: Mai 2011 Tools required:
Description: C250 S/CS Electric Valve Part number: 23709 information on: www.thetford.eu Version: V2 Date: Mai 2011 Tools required: Remove Waste holding tank Remove bowl retainer bracket closest to the
Your Partner for Custom Interconnectivity Solutions. ISO 9001:2008 AS9100C:2009 ISO 13485:2003 ISO 17025:2005 Qualified
Your Partner for Custom Interconnectivity Solutions ISO 9001:2008 AS9100C:2009 ISO 13485:2003 ISO 17025:2005 Qualified LEMO Precision Custom Connection Solutions The Original Push-Pull Connector Seven
Spare parts list ( ) SGV 6/5
Spare parts list (1.092-003.0) SGV 6/5 14.09.2016 www.kaercher.com EN Table of contents Order instructions SGV 6/5 (1.092-003.0) 4 Spare parts list SGV 6/5 (CUL) (5.973-516.0) 12 Control system SGV 6 (US/JP)
MEGAWAT * HIGH DENSITY CARTRIDGE HEATERS
MEGAWAT * HIGH DENSITY CARTRIDGE HEATERS MEGAWAT high-density cartridges are round tubular heaters with electrical terminations on one side. These dependable heaters are made to withstand tough industrial
FOREWORD. Only 3 connector parts makes the assembly process both simple and efficient. CONTENTS. 1. Preparation and tools required for assembly
FOREWORD Thank you for purchasing FOCI s pre-assembled QF and QP (FC/APC) Optical Fiber Connectors. We are confident that our excellent manufacturing procedures and stringent quality control guarantee
HARTING Han M23 Circular Connectors
HARTING Han M23 Circular Connectors Han M23 circular connectors Contents Page Overview Features....02 Approvals....02 Technical characteristics....03 Hoods and housings Hoods....04 Bulkhead mounted housings....06
Fast Fix Kenmore Model 100 Clutch Replacement
Fast Fix Kenmore Model 100 Clutch Replacement Replace your worn or broken transmission clutch on the Kenmore Model 110 washing machine. Written By: Jonathan Beach ifixit CC BY-NC-SA www.ifixit.com Page
RAYCHEM SCREENED SEPARABLE CONNECTORS RSTI FOR SWITCHGEARS AND TRANSFORMERS IN MEDIUM VOLTAGE DISTRIBUTION NETWORKS
ENERGY /// RAYCHEM SCREENED SEPARABLE CONNECTORS RSTI RAYCHEM SCREENED SEPARABLE CONNECTORS RSTI FOR SWITCHGEARS AND TRANSFORMERS IN MEDIUM VOLTAGE DISTRIBUTION NETWORKS ADVANCED SWITCHGEAR CONNECT TECHNOLOGY
SIMPLICITY MODEL LVPB7200
SIMPLICITY MODEL 7200 LVPB7200 BODY GROUP 7200 BODY GROUP 7200 Key Part No Description Key Part No Description 1 7.8-PLAIN Simplicity 7000 Paper Bag 29 D625-0231 Suction Inlet Complete 2 B221-0213 Dust
DL424/425 DirectLine Sensor Module for Dissolved Oxygen Probes Series DL5000 Specifications
DL424/425 DirectLine Sensor Module for Dissolved Oxygen Probes Series DL5000 Specifications 70-82-03-48 January 2003 Overview The DirectLine DL424/425 Sensor Modules are part of a family of products developed
QFM41.. Duct sensors QFM41.. AQF4150 AQF3153. Symaro. for relative humidity and temperature with calibration certificates
1 883 1883P01 1883P02 1859P04 QFM41.. AQF4150 AQF3153 Symaro Duct sensors for relative humidity and temperature with calibration certificates QFM41.. Operating voltage AC 24 V / DC 13.5...35 V Signal output
CHECKFIRE 210 Detection and Actuation System
DATA SHEET CHECKFIRE 210 Detection and Actuation System Features Supervised power, detection, release, and communication circuits Display module with LED system status indicators Adjustable mounting bracket
Power. Average noise level (DIN EN ISO 4871)
21m 3 /h to 102m 3 /h Very low noise Minimal depth in Functional design Time-saving installation Filter fans are used to provide an optimum climate in s. The interior temperature of an can be reduced by
TE CONNECTIVITY S CYLINDER HEAD WIRING SOLUTIONS FOR INDUSTRIAL & COMMERCIAL VEHICLES WE GO TO EXTREMES TO MAKE EVERY CONNECTION COUNT
TE CONNECTIVITY S CYLINDER HEAD FOR INDUSTRIAL & COMMERCIAL VEHICLES WE GO TO EXTREMES TO MAKE EVERY CONNECTION COUNT INDUSTRIAL & COMMERCIAL TRANSPORTATION /// CYLINDER HEAD FOR INDUSTRIAL & COMMERCIAL
PRODUCTS FOR Wiring Duct Power & Grounding Connectors Fastening Products Control Termination Identification Solutions
PRODUCTS FOR Head Office 700 Thomas Avenue Saint-Jean-sur-Richelieu, Quebec J2X 2M9 Tel.: (450) 347-5318 Fax: (450) 347-1976 Wiring Duct Power & Grounding Connectors Atlantic Region Regional Sales Offices
TE CONNECTIVITY S CYLINDER HEAD WIRING SOLUTIONS FOR INDUSTRIAL & COMMERCIAL VEHICLES
TE CONNECTIVITY S CYLINDER HEAD FOR INDUSTRIAL & COMMERCIAL VEHICLES WE GO TO EXTREMES TO MAKE EVERY CONNECTION COUNT INDUSTRIAL & COMMERCIAL TRANSPORTATION /// CYLINDER HEAD FOR INDUSTRIAL & COMMERCIAL
Raychem Elastomeric Medium Voltage Push-on and Cold-shrink Applicable Terminations TFTI/TFTO
Raychem Elastomeric Medium Voltage Push-on and Cold-shrink Applicable Terminations TFTI/TFTO Elastomeric MV Terminations TFTI/TFTO for and Applications for Polymeric Cables up to 42 kv Push-on and Cold-shrink
Honeywell Pressure Switches Line Guide
Honeywell Pressure Line Guide Better under pressure. For years, manufacturers and operators of heavy-duty equipment have trusted Honeywell pressure and vacuum switches. They re proven under pressure, in
for relative humidity and temperature with calibration certificates
1 859 1859P01 1859P02 QFA4160 AQF4150 Symaro Room Sensor for relative humidity and temperature with calibration certificates QFA4160 Operating voltage AC 24 V or DC 13.5...3 Signal output DC 0...10 V for
Scrubber driers compact BR 40/10C
Scrubber driers compact BR 40/10C With the BR 40/10 we present the successor of the BR 400, the most economic machine in its class. This compact and powerful machine has a working width of 400 mm and a
Product Guide Low Voltage Switchboard & Switchgear
Product Guide 2018 Low Voltage Switchboard & Switchgear General INESING low voltage switchgear is completely designed and engineered by INESING using circuit breakers from a leader manufacturers like ABB,
Level V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline
![Level V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline](/thumbs/87/96384356.jpg "Level V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline")
Level V IDC Connectors,.125 x.125 [3.18 x 3.18] Centerline Product Facts Termination of discrete wire sizes 26-22 AWG [0.12-0.3 mm 2 ] as well as jacketed cable and bonded ribbon cable (conductors separated)
LEAVYSEAL Connector Series with flame-retardant material acc. UL 94 V-0
LEAVYSEAL Connector Series RoHS Ready LEAVYSEAL Connector Series Industrial & Commercial Transportation When every connection counts, TE Connectivity delivers reliable connectivity products designed to
PRELIMINARY. Technical Instructions TI 1127 Installing Crossover Washer OPL Liquid Supply Kit
PRELIMINARY Technical Instructions TI 1127 Installing Crossover Washer OPL Liquid Supply Kit CAUTION: THESE INSTRUCTIONS ARE INTENDED TO ASSIST QUALIFIED, EXPERIENCED SERVICE PERSONNEL ONLY! IMPROPER SERVICING
Application Tooling Specification Sheet
Modular Crimp Head Order No. 63825-7170 Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63825-7100 FEATURES % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically
LSH (E 2000 ) High performance. High reliability. High safety. High flexibility
E-2000 is a high performance connector which meets the highest standards y excellence in design and manufacturing processes. Only high quality and high precision materials are used to guarantee connections
S E R V I C E K I T S
S E R V I C E K I T S Installations, maintanance or service, done on electrical equipment, often occur quickly and on short notice. The necessary terminals and splices required are not available in time,
PHOTOVOLTAIC CABLES. Photovoltaic Cable 2000V/1500V Photovoltaic Cable 2000V/1000V
PHOTOVOLTAIC CABLES PHOTOVOLTAIC CABLES INDEX n AmerSol Dual-Certified (UL / ETL) Photovoltaic Cable 2000V/1500V....................... 2-3 n AmerSol Dual-Certified (UL / ETL) Photovoltaic Cable 2000V/1000V.......................
TE S RAYCHEM PLUG-IN TERMINATIONS (RPIT) INNER CONE SYSTEMS FOR SWITCHGEARS AND TRANSFORMERS UP TO 52 kv
TE S RAYCHEM PLUG-IN TERMINATIONS (RPIT) INNER CONE SYSTEMS FOR SWITCHGEARS AND TRANSFORMERS UP TO 52 kv TE S RAYCHEM PLUG-IN TERMINATIONS (RPIT) TYPE-TESTED, FIELD-PROVEN INNER CONE CONNECTORS Inner cone
SPECIFICATION AND PERFORMANCE MDP CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE OF MDP CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 of 16 CLAUSE CONTENTS PAGE 1.0 SCOPE... 3 2.0 APPLICABLE DOCUMENTS... 3 3.0
https://www.te.com/commerce/pcnws/pcnforms?pcndate=03-jul-2012&...
Page 1 of 12 CURRENT DATE: 28-JANUARY-2014 TE CONNECTIVITY PRODUCT CHANGE NOTIFICATION NO: E-12-011457 PCN DATE: 03-JUL-2012 PRODUCT CHANGE NOTIFICATION We would like to inform you about the following
March 2002 Rev O
RECOMMANDATIONS GENERALES D UTILISATION CONNECTEUR 18 VOIES MQS GENERATION II GENERAL OPERATING INSTRUCTIONS Instructions Sheet 20 March 2002 Rev O Traduit par le Service Technique le 07 octobre 2002 1.
Rugged, compact, lightweight Connectors and cable assemblies. Expertise Reliability Innovation.
Rugged, compact, lightweight Connectors and cable assemblies www.fischerconnectors.com FISCHER ULTIMATE TM KEY FEATURES SERIES DURABILITY Sealing IP68/IP69 even unmated Hermetic Extremely robust mechanical
Rugged, compact, lightweight Connectors and cable assemblies. Expertise Reliability Innovation.
Rugged, compact, lightweight Connectors and cable assemblies www.fischerconnectors.com FISCHER ULTIMATE TM KEY FEATURES SERIES DURABILITY Sealing IP68/IP69 even unmated Hermetic Extremely robust mechanical
AMP NETCONNECT Category 5E SL Shielded Cabling System. 1. General Description
Category 5E SL Shielded Cabling System Table of Content: 1. General System 7.1. DIN Style Faceplates & Outlets 2. System Cables 7.2. 45x45 MOSAIC Style Faceplates & Outlets 3. Category 5E Shielded SL (SlimLine)
RICCAR VIBRANCE VIBC.2
RICCAR VIBRANCE VIBC.2 LRPB-VIBC.2 BODY GROUP BODY GROUP Key Part No Description Key Part No Description 1 D224-0630 Dust Cover Assembly 25 B210-0605 Rear Wheel Axle 2 A732-5300 Combination Washer and
Quick Reference Guide: Connectors for Mobile Devices
Quick Reference Guide: Connectors for Mobile evices Tyco Electronics supplies a unique expertise for today's and tomorrow's mobile equipment applications, including cellular phones, mobile media players,
ISOMETER isomed427p. Application Medical IT system in accordance with IEC , IEC , IEC and DIN VDE
Insulation monitoring device with integrated load and temperature monitoring and locating current injector for insulation fault location systems for medical IT systems _D00043_02_D_XXEN/09.2016 Insulation
Power Blocks - Splicer/Distribution
POWER BLOCKS Power Blocks - Splicer/Distribution Electrical 60-2280 amps 600 volts AC/DC (UL) Flexible stranded wire compliant Multiple wire rating - refer to data sheets for details Listed products provide
3NT SERIES FIXED TEMPERATURE THERMOSTATS Introduction
3NT SERIES FIXED TEMPERATURE THERMOSTATS Introduction Automatic reset thermostat designed to meet your specific application requirements. Its patented and tamper proof snap action bi-metal disc provides
U5300 Industrial Pressure Transducer
FEATURES Heavy Industrial CE Approval 10 V/m EMI Protection Reverse Polarity Protection on Input Short Circuit Protection on Output ±0.1% Accuracy ±0.5% Total Error Band Compact Outline -40 C to +125 C
INSTALLATION INSTRUCTIONS PT-A HEAT/AC STANDARD KIT FORD E-SERIES VANS
INSTALLATION INSTRUCTIONS PT-A-402 - HEAT/AC STANDARD KIT 2007-2014 FORD E-SERIES VANS with Gas engine (To be used with 2007 and newer Prisoner Transport Inserts ONLY) Warning do not attempt to install
One-Touch Locking Style Small Sized Circular Connectors
One-Touch Locking Style Small Sized Circular Connectors Series OUTLINE Waterproof IP 67 Lock Type Push-On series is a small sized waterproof circular connector with push-on locking and turn-off unlocking
KIT NOTICE. These instructions are for replacing the two existing thermostats with a single new solid-state thermostat.
KIT 06401-004-22-16 5 1 2 NOTICE 3 (3 PLC'S) These instructions are for replacing the two existing thermostats with a single new solid-state thermostat. 4 PREPARATION PARTS INCLUDED 6 1 7 5 8 2 4 (4 PLC'S)
CATEGORY 6A FTP RJ45 SOLUTION
CATEGORY 6A FTP RJ45 SOLUTION Clipsal titanium Patch Cord Clipsal titanium LSZH Patch Cord Clipsal titanium Keystone Jacks Clipsal titanium Modular Jacks Clipsal titanium Patch Panels Clipsal titanium
INSTALLATION AM
INSTLLTION M 000.. SFETY INSTRUCTIONS This Manual must be read before installing the irmaster air handling unit. Following this Manual will ensure this product is operated correctly. The manufacturer cannot
Product Description. Options. Fan Voltage. Electrical Connections Technical Data - Key Characteristics
Cirrus 25/1 The Cirrus 25/1 range of fan heaters uses PTC ceramic heating technology to provide the user with a product ideally suited to climate control. The heater can be controlled independently to
QUADRAX D-SUB CONNECTORS
QUADRAX D-SUB CONNECTORS RUGGED QUADRAX DESIGN ENABLES GIGABIT ETHERNET SPEEDS WITH SUPERIOR SHIELDING PERFORMANCE FOR SIGNAL INTEGRITY QUADRAX D-SUB CONNECTORS Quadrax High-Speed Connectors WELL ESTABLISHED
MICRO SWITCH Cable-Pull Safety Switches CPS Series Issue 3. Datasheet FEATURES DESCRIPTION POTENTIAL INDUSTRIAL APPLICATIONS
MICRO SWITCH Cable-Pull Safety Switches CPS Series DESCRIPTION Honeywell s MICRO SWITCH CPS Series Cable-Pull Safety Switches provide a readily accessible emergency stop signal, a cost-effective means
Operating Instructions
D-TEK Vehicle Loop Detector Operating Instructions This product is an accessory or part of a system. Always read and follow the manufacturer s instructions for the equipment you are connecting this product
Full Size Canister Service Manual Riccar Models 1700 / 1800 Power Nozzles RPB-100 / RPB-220 / RPB-224 / RPB-250
Full Size Canister Service Manual Riccar Models 1700 / 1800 Power Nozzles RPB-100 / RPB-220 / RPB-224 / RPB-250 Table of Contents I. General Full Size Canister Issues...2 A. Full Bag Indicator...2 1. General
VICINITY G R EEN W A LL. Installation Guidelines
VICINITY G R EEN W A LL Installation Guidelines System Hardware Overview Irrigation System Pot Rail Pot System Bag Inline Filter Inlet Pipe 6-15mm 0.24-0.6 Overflow Pipe Min 15mm Min 0.6 Tank Stopper
Compact, robust crimping tool. suitable for a variety of noninsulated. terminals. Also features a cable cutter and spring return.
CRIMPING & CABLE TOOLS Compact, robust crimping tool suitable for a variety of non-insulated terminals. Also features a cable cutter and spring return. TT71 Crimping Tool/Cable Stripper suitable for insulated
MICRO SWITCH Limit Switch Comparison
MICRO SWITCH Limit Switch Comparison Series SZL-VL-S NGC 14CE 914CE E6/V6 E7/V7 Compact LS 200LS (plug-in) SZL-WL GLA GLC GLD GLE HDLS Std & plug-in HDLS epoxy sealed body HDLS stainless steel Design Miniature
INDUSTRY /// RAIL T-CONNECTOR RSTI-68R-HT RSTI-CC-68R-HT RAIL APPROVED T-CONNECTORS FOR ROLLING STOCK- TYPE C INTERFACE
INDUSTRY /// RAIL T-CONNECTOR RSTI-68R-HT RSTI-CC-68R-HT RAIL APPROVED T-CONNECTORS FOR ROLLING STOCK- TYPE C INTERFACE RSTI-68R-HT RSTI-CC-68R-HT T-CONNECTORS FOR ROLLING STOCK -TYPE C INTERFACE Introducing
Quick Reference Guide.050 Centerline Micro-MaTch Connector Series
Quick Reference Guide.050 enterline MicroMaTch onnector Series The Tyco Electronics MicroMaTch connector family, with its contact spacing of 1.27mm, offers a variety of wiretoboard and boardtoboard interconnections.
Agencavi Srl has been specializing in the distribution of special cables and accessories for industrial automation since 1983.
About us Agencavi Srl has been specializing in the distribution of special cables and accessories for industrial automation since 1983. Product quality is an essential element for ensuring the efficiency
LOW POWER AND SIGNAL APPLICATION GUIDE APPLIANCES /// LOW POWER & SIGNAL APPLICATION GUIDE
LOW POWER AND SIGNAL APPLICATION GUIDE MORE SOLUTIONS TE Connectivity s (TE) extensive connector and sensor solutions provide the essential connectivity you need for your daily interactions at home and
TOOLS REQUIRED: Crimping tool A/C Recovery Unit Wrench set up to 1 ¼ 4 Hole saw
INSTALL INSTRUCTIONS PT-A-401 HVAC UNIT for 2003-2018 CHEVROLET/GMC VAN (For 2007 ALL WHITE Prisoner Transport Inserts ONLY) Not Recommended for diesel engine application because of lack of space needed
Plugs & sockets. Industrial plugs and sockets Scame I-1 5. Industrial switched sockets. Scame I-4 6. Distribution boards.
7% Plugs & sockets I Industrial plugs and sockets Scame I-1 5 Industrial switched sockets Scame I-4 6 Distribution boards Scame I-7 8 Industrial plug adaptors Scame I-8 Weatherproof switches and sockets
Signal Connectors for Topside and Subsea Applications
Signal Connectors for Topside and Subsea Applications Withstand the Hazards of Offshore DEUTSCH signal connectors from TE Connectivity (TE) deliver rugged reliability in challenging and harsh environments
HOOK-UP AND LEAD WIRE. UL: 3284, Non VW-1 CSA: AWM I A/B, CL-1254, FT-2. AWG Size. Number of Strands. Note: AWG 20 is available upon request.
HOOK-UP AND LEAD WIRE PRODUCT DATA Rubber Insulated Wire UL: 3284, Non VW-1 CSA: AWM I A/B, CL-1254, FT-2 Prestolite manufactures a full assortment of standard wire and cable products for the OEM in automotive
Liquid Level Controller
iquid evel Controller Fully Automatic operation enabling both draining and filling simultaneously with a single device Adjustable sensitivity level from 1k to 200k Ohm Includes provision for Manual start
Detroit Radiant Products Co.
UH and FA Series Concentric Vent Kit Instruction Sheet Detroit Radiant Products Co. CVK-3, 4 or 6 Concentric Vent Kit Installation Instructions This instruction sheet is intended to describe the installation
Multi-Spiral. Cooling/ Freezing. Storage Systems. Final Proofing. Cutting/ Decorating. Depanning. Baking. Member of the
Multi-Spiral Final Proofing Cutting/ Decorating Baking Depanning Cooling/ Freezing Storage Systems Member of the Kaak: an introduction Kaak Nederland b.v., together with Kaak Bakeware, is the origin of
ClimaSys Resistance heaters Selection guide
Selection guide Insulated resistance heaters Power W Voltage Type of connection Terminal block Cable 87504 10 12-36 DC X 87501 10 110-250 AC X 87512 21 12-36 DC X 87502 21 110-250 AC X 87518 55 12-36 DC
GigaCore 12. Gigabit Ethernet Switch for the entertainment industry. Quick Start Guide. V2.1.0 Rev5. English
GigaCore 12 Gigabit Ethernet Switch for the entertainment industry Quick Start Guide V2.1.0 Rev5 English Table of Content Safety Instructions 3 Compliance information 4 Warranty information 5 Registration
RAR... Photocell Detectors. Building Technologies Division
7 71 Photocell Detectors RR... The photocell detectors are designed for use with burner controls, for the supervision of yellow-flame oil flames. They are used especially in connection with burner controls
ENERGY /// MINING SOLUTIONS MINING SOLUTIONS RUGGEDIZED HIGH PERFORMANCE PRODUCTS
ENERGY /// MINING SOLUTIONS MINING SOLUTIONS RUGGEDIZED HIGH PERFORMANCE PRODUCTS TE Energy offers a wide range of reliable and cost-effective products for the electrical power industry. Our position as
26 th January 2016 SESSION TWO TECHNICAL REQUIREMENTS
26 th January 2016 SESSION TWO TECHNICAL REQUIREMENTS WHAT IS THE REQUIREMENT? PPE to meet the day to day demands of a modern firefighter 2017-2023+, recognising the varied activities undertaken and environments
ARINC 801 Fiber Optic Interconnects for Aerospace & Defense. A Complete End-to-End Solution Featuring Connectors, Termini & Cable Harnesses
ARINC 801 Fiber Optic Interconnects for Aerospace & Defense A Complete End-to-End Solution Featuring Connectors, Termini & Cable Harnesses We Connect the Aerospace & Defense Industry with High-Speed Data,
MVP-D-TEK Vehicle Loop Detector 9 Volts DC to 240 Volts AC. Operating Instructions
MVP-D-TEK Vehicle Loop Detector 9 Volts DC to 240 Volts AC Operating Instructions We have designed the new MVP-D-TEK vehicle loop detector with the following objectives in mind: 1. Compact package to allow