FF-SG Series. Safety light curtain Compact and low-cost unit

Size: px

Start display at page:

Download "FF-SG Series. Safety light curtain Compact and low-cost unit"

Shawn Patrick
5 years ago
Views:

Safety light curtain Compact and low-cost unit FF-SG Series FEATURES Active Optoelectronic Protective Device compliant with the requirements of the IEC/EN 61496 - parts 1 and 2 European norms for

1 Safety light curtain Compact and low-cost unit FF-SG Series FEATURES Active Optoelectronic Protective Device compliant with the requirements of the IEC/EN parts 1 and 2 European norms for Type 4 electrosensitive protective equipment Meets applicable parts of North American standards and regulations OSHA and 217; ANSI B11.1, 2 and 19; RIA 15.06; CSA Self-contained unit. No electrical connection necessary between emitter and receiver 2 fail-safe static outputs with shortcircuit and cross-fault detection Integrated DC to DC converter as requested by the IEC/EN Standard Resolutions available: ø18 mm/0.7 in for finger detection ø30 mm/1.2 in for hand detection Protection height up to 1470 mm/58 in Scanning range up to 3,5 m/11.48 ft Electrical connection: 3 m/9.84 ft leadwire Mounting pins included Optional interface control module for more switching capability or additional features APPLICATIONS Presses and punches Woodworking machines Electronic assembly Textile machines Pressing, moulding and thermoforming machines C US Approved as Type 4 per IEC/EN /2 The new Honeywell FF-SG light curtain is designed in compliance with IEC/ EN parts 1 and 2 standard and meets the requirements for a Type 4 Active Optoelectronic Protective Device, the safest possible level for safety products. The product received an EC type test certificate from the French INRS notified body, required for safety equipment as per the 98/37/EC Machinery Directive. It meets the applicable parts of North American standards and regulations OSHA , ANSI and RIA for Control Reliability and has a Culus mark, making it a product usable in all parts of the world. As soon as an object is detected inside the protection field, the FF-SG opens its two fail-safe static outputs to remove hazardous situation from the machine it controls. The FF-SG is a self-contained light curtain that does not require a separate control unit for operation. When connected to the FF-SRS59392 optional interface control module, the FF-SG provides a wide variety of advanced functions: cross-monitored relays, final switching devices monitoring for the control of external contactors or relays, choice between automatic restart or start and restart interlock as well as relay status indicators. This light curtain has been designed to satisfy the requirements of worldwide machine manufacturers: its compact size combined with its low cost make it applicable to many situations where light curtains were too expensive previously. The cross section of 42 x 55 mm 2 /1.65 x 2.16 in 2 makes installation possible in tight spaces, especially with the help of the small pins supplied with the light curtains. Indicators provide information on the outputs status and on failure diagnostic. The housing has a T-slot mounting system to adapt brackets anywhere along the housing. The optional FF-SRS59392 interface control module easily fits inside the machine control panel with its 45 mm/1.77 in width DIN rail mount housing. The FF-SG does not need a galvanic insulated power supply since it includes its own means of galvanic insulation (DC/DC converter). Compliance with the installation requirements of the IEC/EN standard is therefore guaranted by design.! WARNING MISUSE OF DOCUMENTATION The information presented in this product sheet (or catalogue) is for reference only. DO NOT USE this document as system installation information. Complete installation, operation and maintenance information is to be referenced for each product. Failure to comply with these instructions could result in death or serious injury. FF-SG Series EN FR26 GLO 0399 Printed in France Order: DT EN

2 Compact and low-cost unit FF-SG Type 4 according to the IEC/EN parts 1 and 2 standards 2 fail-safe static outputs with short-circuit and cross-fault detection Dimensions in millimeters / inches, meters / feet, weights in kg / lbs Features Type Resolutions (mm/in) Protection heights (mm/in) Nominal scanning ranges (m/ft) Supply voltage Power consumption Outputs Response time LED status indicators Cross sectional area Emission Effective aperture angle Light immunity Electrical noise immunity Ambient temperature Vibrations Sealing Material Electrical connection Approved as Type 4 per IEC/EN /2 SG18 SG30 ø 18 / 0.7 ø 30 / 1.2 See Table 2 0 to 3,5 / 0 to to 3,5 / 0 to Vdc (± 15 %) Emitter: 7 W max. / Receiver: 5.5 W max. (see Table 2) 2 fail-safe static outputs (switching capacity: 0.5 A / 24 Vdc) 13.5 to 22.5 ms (see Table 2) Emitter: failure alarm, power Receiver: outputs status W 42 x D 55 mm 2 /W 1.65 x D 2.16 in 2 (see Tables 1 and 2 for complete housing dimensions) Infrared modulated light source (880 nm) ± 2, ± 25 % (in compliance with the IEC/EN part 2) Sun: lux / Lamp: lux IEC : level III / IEC : level III Operating temperature: 0 to 55 C/32 to 131 F / Storage temperature: -20 to 75 C/-4 to 167 F IEC/EN : 10 to 55 Hz frequency range, 1 octave/min.sweep rate, 0.35 mm ± 0.05 amplitude, 20 sweeps per axis, for 3 axes IP 65, NEMA 4, 13 Housing: aluminium alloy, front plate: polymethyl metacrylate (PMMA), end caps: polycarbonate Emitter: 3 wire / Receiver: 7 wire C US Ordering information Each listing consists of an emitter, a receiver, 2 pairs of mounting pins, and a test rod. FF-SG qq qqq AL32 Model (see Table 2) Resolutions 18: ø 18 mm / 0.7 in 30: ø 30 mm / 1.2 in Dimensions (mm/in) P ø R D 50/ / ,4/ / ,7/ / ,2/0.44 (1) Protection Height for the minimum detected object size or resolution (2) Sensing Field Height (full screen height) (3) Total Height 21/ ,6/0.61 9,7 / ,6 / ,8/ / / ,2/ ,65/ / ,4/ ,08/ 0.79 Table 1 (mm/in) ør (resolution) P (lens pitch) D (lens diameter) A (inactive zone) B (inactive zone) FF-SG18 ø 18 / / / / ,8 / 3.73 FF-SG30 ø 30 / / / / ,8 / FF-SG Series

3 Table 2 Model Protection height (mm/in) (1) SG / / / SG / / / / / / / Sensing field height (mm/in)(2) SG / / / SG / / / / / / / Total height (mm/in) (3) SG / / / / / / / SG / / / / / / / Em. Rec. Em. Rec. Em. Rec. Em. Rec. Em. Rec. Em. Rec. Em. Rec. Weight per device (kg/lbs) 1,1/2.4 1,2/2.6 1,5/3.3 1,6/3.5 1,8/3.9 1,9/4.2 2,2/4.8 2,3/5 2,5/5.5 2,6/5.7 2,9/6.3 3/6.6 3,2/7 3,3/7.2 Power consumption (W) SG18 4 3,5 4 3,5 4 3,5 4 3,5 4 3,5 4 3,5 4 3,5 (Emitter/receiver) SG30 4 3,5 4 3,5 4 3,5 4 3,5 4 3,5 4 3,5 4 3,5 Safety distances (in mm, 100 mm = 3.9 in) European EN 999 standard SG18 SG30 Normal approach Ds S ³ 2000 (t1 + t2) + 32, S ³ 2000 (t1 + t2) + 128, with S ³ 100 with S ³ 100 Hl Hu If S ³ 500, then use: If S ³ 500, then use: S ³ 1600 (t1 + t2) + 32, S ³ 1600 (t1 + t2) + 128, with S ³ 500 with S ³ 500 Parallel approach Ds S ³ 1600 (t1+ t2) H), with H 875 or S ³ 1600 (t1+ t2) + 850, with 875 H 1000 with H ³ 15 (R-50) where R is the light curtain resolution H Angled approach Ds if a ³ 30, then use one of the formula given for a normal approach, Hl Hu if a 30, then use one of the formula given for a parallel approach, with Hu 1000 and Hl ³ 15 (R-50) where R is the light curtain resolution With: S minimum safety distance (in mm, 100 mm = 3.9 in) t1 light curtain response time (in sec.) t2 machine stopping time (in sec.) H height of the detection plane above the reference floor (in mm, 100 mm = 3.9 in) Hu height of the uppermost beam above the reference floor (in mm, 100 mm = 3.9 in) Hl height of the lowest beam above the reference floor ( in mm, 100 mm = 3.9 in) For more information, refer to the EN 999 European standard or comply with the requirements on safety distances given by the type C European standard if existing for the considered machine. FF-SG Series 3

4 Safety distances (in inches, 1 in = 25,4 mm) US ANSI / OSHA standard SG18 SG30 Normal approach DS DS ³ 63 (t1 + t2) DS ³ 63 (t1 + t2) With: DS minimum safety distance (in inches, 1 in. = 25.4 mm) t1 light curtain response time (in sec.) t2 machine stopping time (in sec.) For more information, refer to the US regulations and standards (OSHA 29 CFR and , ANSI B11.1, B11.2, B11.19 and ANSI/ RIA R15.06). Wiring diagram (using the FF-SRS59392 safety control module) (DC+) 1A 1A 1.5 A max Phase (DC+) NO P/B 1 FF-SG emitter 1 FF-SG receiver OSSD OSSD2 A1(+) S33 S34/Y1 FF-SRS59392 relay module internal fuse A2(-) S12 S22 Y Signalling contact X2 X1 X3 (DC-) Emergency stop Push-button Neutral (DC-) Dual channel machine control circuit (recommended circuit) The FF-SRS5939 interface control module is set in the Manual restart mode without FSD monitoring: OSSD1 and OSSD2: Output Signal Switching Devices (light curtain safety contacts) N.O. P/B: normally open contact of a push-button Notice Improper use of the FF-SG light curtain The cross-monitoring of the FF-SG static outputs is based upon a self-checking principle which guarantees the detection of an output short-circuit and the detection of a short-circuit between the outputs (cross-fault detection). The FF-SRS5939 interface control module is primarily designed to be interfaced with Honeywell fail-safe static outputs devices. Compatibility of the FF-SG with any other emergency stop safety control module is not guaranteed. 4 FF-SG Series

5 Wiring diagram (using external safety relays with guided contacts) (DC+) 1A 1A 1.5A NO P/B Dual channel machine control circuit 1 FF-SG emitter 1 FF-SG receiver OSSD1 3 OSSD2 Phase (DC+) Neutral (DC-) (DC-) (1) FSD (1) (1) FSD This interface provides the manual restart and the FSD monitoring: (1) 31 Vdc varistors (customer supplied) OSSD1 and OSSD2: Output Signal Switching Devices (light curtain safety contacts) FSD: Final Switching Devices (safety relays with guided contacts) N.O. P/B: normally open contact of a push-button LED status indicators Emitter Receiver Power indicator (yellow) or alarm indicator (flickering red) Operation indicator (green and red) FF-SG Series 5

6 Accessories Test rods FF-SGZROD18 Test rod for ø18 mm/0.7 in. resolution safety light curtains Already included in the FF-SG package. FF-SBZROD30 Test rod for ø30 mm/1.2 in. resolution safety light curtains Already included in the FF-SG package. Safety control module FF-SRS59392 Interface control module designed for failsafe static outputs safety light curtains (24 Vdc) To be ordered separately as an option. AC to DC power supply FF-SYZ Lambda Coutant JWS50-24 A type AC/DC power supply Input voltage: 85 to 265 Vac Output voltage: 24 Vdc / 2.2 A (50 W) Dimensions: 159 x 85 x 37 mm/6.26 x 3.34 x 1.45 in. Mounting: three M3 screws or DIN RAIL adapter (see below) Approvals: UL 1950, CSA 950, EN To be ordered separately as an option. FF-SYZ DIN RAIL adapter for Lambda Coutant JWS50 power supply To be ordered separately as an option. 6 FF-SG series

7 FF-SG Series 7

8 Warranty and remedy Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. While we provide application assistance, personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Sales and service For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: ASIA PACIFIC Australia Honeywell Limited Tel: (61) Fax: (61) Toll Free Toll Free Fax: China - PRC Honeywell China Ltd. Tel: (86-10) Fax: (86-10) China - Hong Kong Honeywell China Ltd. Tel: (852) Fax: (852) India Honeywell Inc. Tel: (91) Fax: (91) Indonesia Honeywell Indonesia Tel: (622) Fax: (622) Japan Yamatake-Honeywell Co., Ltd Tel: (81) Fax: (81) South Korea LG - Honeywell Co. Ltd Tel: (822) Fax: (822) Malaysia Honeywell Engineering Sdn Bdh Tel: (603) Fax: (603) New Zealand Honeywell Limited Tel: (64-9) Fax: (64-9) Singapore / SE Asia Regional Offc. Honeywell Southeast Asia Pte. Ltd. Tel: (65) Fax: (65) Taiwan Honeywell Taiwan Ltd. Tel: (886-2) Fax: (886-2) Thailand Honeywell Systems Ltd. Tel: (662) Fax: (662) NORTH AMERICA Canada Honeywell LAD Tel: Fax: USA MICRO SWITCH Sensing and Control International Headquarters Tel: Fax: EUROPE Austria Honeywell Austria GmbH Tel: (43) Fax: (43) Belgium Honeywell SA/NV Tel: Fax: Bulgaria Honeywell EOOD Tel: (359) Fax: (359) Czech Republic Honeywell spol. s r.o. Tel: (42-2) /3424 Fax: (42-2) Denmark Honeywell A/S Tel: Fax: Finland Honeywell OY Tel: (358) Fax: (358) France Honeywell SA Tel: (33) Fax: (33) Germany Honeywell AG Tel: Fax: Hungary Honeywell Kft. Tel: (36) Fax: (36) MICRO SWITCH Centre Honeywell Control Systems Ltd. Tel: (44) Fax: (44) Italy Honeywell S.p.A. Tel: 39 (2) Fax: 39 (2) The Netherlands Honeywell B.V. Tel: (020) Fax: (020) Norway Honeywell A/S Tel: (47) Fax: (47) Poland Honeywell Sp. zo.o Tel: (48) Fax: (48) Portugal Honeywell Portugal Lda Tel: (351) Fax: (351) Romania Honeywell Bucharest Tel: (40) Fax: (40) Commonwealth of Independence States (CIS) Honeywell-Sterch Tel: (7-095) /37 Fax: (7-095) /94/91 Slovak Republic Honeywell sro. Tel: (421 7) /7400 Fax: (421 7) South Africa (Republic of) Honeywell Southern Honeywell S.A. Pty. Ltd Tel: (27) Fax: (27) Spain Honeywell S.A. Tel: (34) Fax: (34) Sweden Honeywell AB Tel: (46) Fax: (46) Switzerland Honeywell AG Tel: (41) Fax: (41) United Kingdom Honeywell Control Systems Ltd Tel: (44) Fax: (44) Mediterran & Africa Distributors & Turkey Honeywell SpA Tel: (39) Fax: (39) Middle East Headquaters Honeywell Middle East Ltd. Tel: (9712) This publication constitutes no contract between us and our customers and may be changed without notice. Safe installation and operation of our products remain customer's liability. Detailed mounting drawings of all our products illustrated available on request. Honeywell 2000 Honeywell Cométa 21 Chemin du Vieux Chêne Meylan Cedex, France Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois Internet info@micro.honeywell.com 8 FF-SG series

FF-SR Series. FF-SR25933 Two-hand Safety Control Module FF-SR25933

FF-SR Series. FF-SR25933 Two-hand Safety Control Module FF-SR25933 Two-hand Safety Control Module FF-SR Series FEATURES Complies with the Machinery Directive 98/37/EC and UL 508 Type III C per EN 574, Category 4 per EN 954-1 Inputs for two dual-contact pushbuttons 0,5