DNVGL-CP-0398 Edition December 2015
|
|
- Sheena Goodman
- 5 years ago
- Views:
Transcription
1 CLASS PROGRAMME Type approval DNVGL-CP-0398 Edition December 2015 The electronic pdf version of this document, available free of charge from is the officially binding version.
2 FOREWORD DNV GL class programmes contain procedural and technical requirements including acceptance criteria for obtaining and retaining certificates for objects and organisations related to classification. December 2015 Any comments may be sent by to This service document has been prepared based on available knowledge, technology and/or information at the time of issuance of this document. The use of this document by others than DNV GL is at the user's sole risk. DNV GL does not accept any liability or responsibility for loss or damages resulting from any use of this document.
3 CHANGES CURRENT This is a new document. Changes - current Class programme DNVGL-CP Edition December 2015 Page 3
4 CONTENTS Changes current...3 Contents Section 1 General Introduction Documentation...5 Section 2 Product requirements Design requirements Test requirements... 7 Section 3 Testing requirements Table of tests... 8 Class programme DNVGL-CP Edition December 2015 Page 4
5 SECTION 1 GENERAL 1 Introduction 1.1 Objective The objective of this class programme (CP) is to describe the type approval (TA) scheme for luminaires. For a description of the Society's type approval scheme in general and further information on general conditions and procedures for obtaining the Society's TA certificate, see the Society's document DNVGL CP 0338Type approval scheme. The procedures and requirements described in this CP are applicable for obtaining DNV GL TA certificate based on requirements in: DNV GL rules for classification - Ships RU SHIP Pt.4 Ch.8 Electrical installations DNV GL offshore standardos D201 Electrical installations DNV GL CG 0339 Environmental test specification for electrical, electronic and programmable equipment and systems. Section 1 Guidance note: This class programme is not applicable for obtaining EU marine equipment directive (MED) certificates. Visit for information on MED certification. ---e-n-d---of---g-u-i-d-a-n-c-e---n-o-t-e Scope This CP gives a description of the procedures and requirements related to documentation, design and type testing applicable for TA of luminaires. This CP does not set the design requirements to the luminaires. TA is based on compliance with design requirements given in the rules and/or other regulations and standards. The CP describes the applicable design requirements and how to document compliance with the requirements in order to obtain a TA certificate for the equipment. This includes, where relevant, technical requirements for how the type tests shall be performed. 1.3 Application TA of equipment in accordance with this CP is not mandatory. A TA certificate in accordance with this CP will confirm compliance with the requirements in the rules as specified in [1.1]. The TA certificate will not confirm compliance with requirements in other parts of the rules. In case additional requirements in other parts of the rules shall be covered by the TA certificate, this shall be specified in the application for TA and will be stated in the TA certificate. 2 Documentation For TA of luminaires the following documentation shall be submitted: 1) Main drawings for assembled luminaires. 2) References to design standards, rules, specifications etc. 3) Specification of applied material for enclosure and insulation. 4) Test results (from tests already carried out, if any). 5) Applicant's proposal to type test and routine test. 6) Documentation of reliability and endurance on board ships and mobile offshore units, if any. 7) Special operational limitations Class programme DNVGL-CP Edition December 2015 Page 5
6 8) Field of application 9) List of type designations for each variant 10) Construction details: voltage power temperature class insulation class enclosure (IP) class explosion protection, certified by recognised test laboratory special properties, if any. 11) Test programme, which as a minimum includes the elements for type testing, item 2). The test programme shall refer to the relevant IEC standards for each test. 12) Application for type approval form 90.01a Section 1 Class programme DNVGL-CP Edition December 2015 Page 6
7 SECTION 2 PRODUCT REQUIREMENTS 1 Design requirements The luminaires shall comply with the relevant requirements of the following publications in its latest edition including amendments: DNV GL rules for classification ShipsRU SHIP Pt.4 Ch.8, DNV GL rules for classification High speed sight craft and DNV GL Offshore standards. DNV GL CG 0339 Environmental test specification for electrical, electronic and programmable equipment and systems IEC Part 1: General requirements and tests IEC Part 2: Particular requirements. Section 1: Fixed general purpose luminaires IEC Part 2: Particular requirements. Section 2: Recessed luminaires IEC Part 2: Particular requirements. Section 4: Portable general purpose luminaires IEC Part 2-5: Floodlights IEC Part 2: Particular requirements. Section 6: luminaires with built-in transformers for filament lamps IEC Part 2-22: Particular requirements - luminaires for emergency lighting IEC Part 306: Equipment - luminaires and accessories IMO Resolution A.752 (18) Adopted on 4 Nov. 1993: Guidelines for the evaluation, testing and application of Low-Location lighting on passenger ships or ISO (2001) Ships and marine technology -- Lowlocation lighting on passenger ships -- Arrangement Section 2 2 Test requirements The testing is divided into: visual inspection electrical/mechanical tests environmental tests. 2.1 Visual inspection By visual inspection, it shall be verified that the test sample (e.g., prototype) is in conformity with the approved plans. 2.2 Electrical/mechanical tests The tests shall be according to the relevant parts of Sec.3, Table Environmental tests Tests related to endurance and reliability of the product on board ships, e.g., vibration test, should take account of the environmental strains on board vessels. In case of insufficient experience from service on board ships (or equivalent), the following tests may be required as type tests: Vibration test according to the DNV GL Rules for Classification of ShipsRU SHIP Pt.4 Ch.8 Sec.3[2.2], High Speed, Light Craft and Naval Surface Craft RU HSLC Pt.4 Ch.8 Sec.3 [2.2] and/ or DNV GL CG 0339 Damp heat test, according to DNV GL CG 0339 Salt mist test according to DNV GL CG 0339 Dry heat/cold test according to DNV GL CG Class programme DNVGL-CP Edition December 2015 Page 7
8 SECTION 3 TESTING REQUIREMENTS 1 Table of tests Table 1 Table of tests No. Task Specification of test TT RT Section 3 1 Test for marking IEC Sec Test of terminal blocks IEC Sec Test of terminals and supply connections IEC Sec Test of linings and sleeves IEC Sec Test of screws, connections (mechanical) and glands IEC Sec Test of mechanical strength IEC Sec Test of suspension and adjusting devices IEC Sec Test of resistance to corrosion IEC Sec Test of supply connection and other external wiring IEC Sec Test of internal wiring IEC Sec Test of provision for earthing IEC Sec Test of protection against electric shock IEC Sec Test for ingress of dust and moisture IEC Sec Test of insulation resistance IEC Sec Test of electric strength IEC Sec Measurement of leakage current IEC Sec Thermal tests IEC Sec. 12.4, 12.5, Test of resistance to heat IEC Sec Test of resistance to flame and ignition IEC Sec Test of resistance to tracking IEC Sec Mechanical test - screw terminals IEC Sec Mechanical test - screwless terminals IEC Sec Electrical test - screwless terminals IEC Sec Mechanical test - screwless and connection for external wiring IEC Sec Electrical test - terminals and connections for external wiring IEC Sec Recessed luminaires Class programme DNVGL-CP Edition December 2015 Page 8
9 No. Task Specification of test TT RT 27 Test of external and internal wiring IEC Sec Endurance tests and thermal tests IEC Sec Floodlights 29 Mechanical test IEC Sec. 5.6 Section 3 30 Modification of endurance and thermal tests IEC Sec with builtin transformers for filament lamps for emergency lighting 31 Modification of endurance and thermal tests IEC Sec Modification of endurance and thermal tests IEC Sec Test of changeover operation IEC Sec Test of Low-location Lighting IMO Resolution A.752 (18) / ISO TT = Type Test RT = Routine Test Class programme DNVGL-CP Edition December 2015 Page 9
10 DNV GL Driven by our purpose of safeguarding life, property and the environment, DNV GL enables organizations to advance the safety and sustainability of their business. We provide classification and technical assurance along with software and independent expert advisory services to the maritime, oil and gas, and energy industries. We also provide certification services to customers across a wide range of industries. Operating in more than 100 countries, our professionals are dedicated to helping our customers make the world safer, smarter and greener. SAFER, SMARTER, GREENER
Low-voltage switchgear and controlgear - rated voltage does not exceed 1000V AC or 1500V DC
CLASS PROGRAMME Type approval DNVGL-CP-0396 Edition December 2015 Low-voltage switchgear and controlgear - rated voltage does not exceed 1000V AC or 1500V DC The electronic pdf version of this document,
More informationDNVGL-CP-0407 Edition February 2016
CLASS PROGRAMME Type approval DNVGL-CP-0407 Edition February 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationDNVGL-CP-0399 Edition March 2016
CLASS PROGRAMME Type approval DNVGL-CP-0399 Edition March 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationTerminal lugs for LV power cables with aluminum conductors
CLASS PROGRAMME Type approval DNVGL-CP-0409 Edition January 2018 Terminal lugs for LV power cables with aluminum conductors The content of this service document is the subject of intellectual property
More informationDNVGL-CP-0401 Edition February 2016
CLASS PROGRAMME Type approval DNVGL-CP-0401 Edition February 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationDNVGL-CP-0402 Edition February 2016
CLASS PROGRAMME Type approval DNVGL-CP-0402 Edition February 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationGlass fibre rovings - Non-metallic materials
CLASS PROGRAMME Type approval DNVGL-CP-0082 Edition December 2015 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationCoatings for protection of FRP structures with heavy rain erosion loads
CLASS PROGRAMME Type approval DNVGL-CP-0424 Edition May 2016 Coatings for protection of FRP structures with heavy rain erosion loads The content of this service document is the subject of intellectual
More informationPart 6 Additional class notations Chapter 6 Additional fire protection for passenger vessels
RULES FOR CLASSIFICATION Inland navigation vessels Edition December 2015 Part 6 Additional class notations Chapter 6 Additional fire protection for passenger vessels The content of this service document
More informationRADAR REFLECTOR STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 RADAR REFLECTOR JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation with
More informationIndicators for Rudder Angle, Rate of Turn, Propeller Shaft Revolution and Propeller Pitch
STANDARD FOR CERTIFICATION No. 2.9 TYPE APPROVAL PROGRAMME NO. 844.40 - MED A1/4.20-4.21-4.22-4.9 Indicators for Rudder Angle, Rate of Turn, Propeller Shaft Revolution and Propeller Pitch FEBRUARY 2012
More informationSOUND RECEPTION SYSTEM
STANDARD FOR CERTIFICATION No. 2.9 SOUND RECEPTION SYSTEM APRIL 2009 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD (DNV) is an autonomous and independent foundation
More informationMARINE GYRO COMPASS STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 MARINE GYRO COMPASS JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation
More informationSIMPLIFIED VOYAGE DATA RECORDER (S-VDR)
STANDARD FOR CERTIFICATION No. 2.9 SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) APRIL 2009 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD (DNV) is an autonomous and
More informationShipboard incinerators with capacities up to 4000 kw
STANDARD FOR CERTIFICATION No. 2.9 Approval Programmes Type Approval Programmes for Marine Equipment Directive (MED) No. 431.90 - MED A.1/2.7 Shipboard incinerators with capacities up to 4000 kw JANUARY
More informationGROUNDING AVOIDANCE SYSTEM (GAS)
STANDARD FOR CERTIFICATION No. 2.9 GROUNDING AVOIDANCE SYSTEM (GAS) JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent
More informationCircuit Breakers JANUARY The electronic pdf version of this document found through is the officially binding version
STANDARD FOR CERTIFICATION No. 2.9 Approval Programmes Type Approval Programmes for EU recognised organisation Mutual Recognition (MR) No. MR-E001 Circuit Breakers JANUARY 2013 The electronic pdf version
More informationAPRIL 2010 ELECTRICAL EQUIPMENT STANDARD FOR CERTIFICATION DET NORSKE VERITAS. No. 2.9 Type Approval Programme No
STANDARD FOR CERTIFICATION No. 2.9 Type Approval Programme No. 6-800 ELECTRICAL EQUIPMENT APRIL 2010 DET NORSKE VERITAS Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11
More informationAS/NZS :2003 Luminaires - Part 1: General requirements and tests
Menu Home About this portal Latest updates Print Save Email Resource detail Citations AS/NZS 60598.1:2003 Luminaires - Part 1: General requirements and tests Table of Contents View on Information Provider
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00001CD This is to certify: That the Programmable Controller with type designation(s) SIPLUS Series Issued to Siemens AG Fürth, Germany is found to comply with
More informationCable Ties JULY The electronic pdf version of this document found through is the officially binding version
p pproval roramms for U rcos orasato Mutual coto (M)No. 2.9 STANDARD FOR CERTIFICATION Approval Programmes Type Approval Programmes for EU recognised organisation Mutual Recognition (MR) No. MR-E012 Cable
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD IEC 60092-306 Edition 4.0 2009-11 Electrical installations in ships Part 306: Equipment Luminaires and lighting accessories IEC 60092-306:2009(E) THIS PUBLICATION IS COPYRIGHT PROTECTED
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00000W5 Revision No: 2 This is to certify: That the Control and Monitoring System with type designation(s) K-Chief 700 and K-Safe Issued to KONGSBERG MARITIME
More informationSHOP PRIMERS FOR CORROSION PROTECTION OF STEEL PLATES AND SECTIONS
STANDARD FOR CERTIFICATION No. 2.9 SHOP PRIMERS FOR CORROSION PROTECTION OF STEEL PLATES AND SECTIONS OCTOBER 2009 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD
More informationis found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TAA00001MM Revision No: 1 This is to certify: That the Control and Monitoring System with type designation(s) AHD-IMAC Issued to Böning Automationstechnologie GmbH & Co.KG Ganderkesee,
More informationEU RO Mutual Recognition Technical Requirements
Adoption 1 April 2016 1. PRODUCT DESCRIPTION... 1 2. DESIGN EVALUATION... 2 3. PRODUCTION REQUIREMENTS... 6 4. MARKING REQUIREMENTS... 6 6. APPROVAL DATE AND REVISION NUMBER... 7 7. BACKGROUND INFORMATION
More informationGLASS FIBRE REINFORCEMENTS
STANDARD FOR CERTIFICATION No. 2.9 GLASS FIBRE REINFORCEMENTS OCTOBER 2009 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD (DNV) is an autonomous and independent
More information***** 2. Rev.1 is to be uniformly implemented by IACS Members from 1 July 2004.
(Sept 2003) (Rev.1 May 2004) (Rev.2 Nov 2005) (Rev.3 Mar 2012) Hold, ballast and dry space water level detectors (Chapter II-1/25 and Chapter XII/12) and Performance Standards for Water Level Detectors
More informationLuminaires Part 2-4: Particular requirements Portable general purpose luminaires
IEC 60598-2-4 Edition 3.0 2017-04 REDLINE VERSION colour inside Luminaires Part 2-4: Particular requirements Portable general purpose luminaires INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.140.40
More informationISO INTERNATIONAL STANDARD. Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions
INTERNATIONAL STANDARD ISO 15003 First edition 2006-02-15 Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions Génie agricole Matériel électrique
More informationFor compliance with Resolution MEPC.174(58), the Certificate is issued on behalf of the Norwegian Maritime Authority.
Certificate No: TAP000006X Revision No: 1 This is to certify: That the Ballast Water Management System with type designation(s) Optimarin Ballast System, Optimarin Ballast System Ex Issued to Optimarin
More informationISO INTERNATIONAL STANDARD. Ships and marine technology Lowlocation lighting on passenger ships Arrangement
INTERNATIONAL STANDARD ISO 15370 First edition 2001-04-15 Ships and marine technology Lowlocation lighting on passenger ships Arrangement Navires et technologie maritime Éclairage situé en bas sur les
More informationIECEx TEST REPORT IEC Explosive atmospheres Part 0: Equipment General requirements
ExTR Reference Number...: ExTR Free Reference Number...: 223531 Compiled by + signature (ExTL)...: Reviewed by + signature (ExTL)...: NO/NEM/ExTR12.0018/00 Stig André Norheim Arne Hortman Date of issue...:
More informationISO 3999 INTERNATIONAL STANDARD. Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests
INTERNATIONAL STANDARD ISO 3999 Second edition 2004-12-15 Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests Radioprotection Appareils pour
More informationBWTS Installation DNV GL Experience
MARITIME BWTS Installation DNV GL Experience UK Chamber of shipping London 30 June 2016 Naufal Ashraff 1 BWM-1604 June 2016 SAFER, SMARTER, GREENER Installation of BWTS scope Planning/Designing Stage Approval
More informationAS/NZS :2016
Australian/New Zealand Standard Luminaires Part 2.2: Particular requirements Recessed luminaires Superseding AS/NZS 60598.2.2:2001 AS/NZS 60598.2.2:2016 (IEC 60598-2-2, Ed. 3.0:2011, MOD) Incorporating
More informationISO INTERNATIONAL STANDARD. Fire protection Automatic sprinkler system Part 9: Requirements and test methods for water mist nozzles
INTERNATIONAL STANDARD ISO 6182-9 First edition 2005-11-01 Fire protection Automatic sprinkler system Part 9: Requirements and test methods for water mist nozzles Protection contre l'incendie Systèmes
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAE00001BS Revision No: 1 This is to certify: That the Frequency Converter with type designation(s) SINAMICS S120 Cabinet s, Liquid Cooled, Application Marine
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60770-3 First edition 2006-04 Transmitters for use in industrial-process control systems Part 3: Methods for performance evaluation of intelligent transmitters IEC 2006 Copyright
More informationAS/NZS :2015
AS/NZS 60598.2.10:2015 (IEC 60598.2.10, Ed.2.0:2003, MOD) Australian/New Zealand Standard Luminaires Part 2.10: Particular requirements Portable luminaires for children Superseding AS/NZS 60598.2.10:1998
More informationPart 4 Systems and components Chapter 5 Control and Monitoring Systems
RULES FOR CLASSIFICATION Inland navigation vessels Edition December 2015 Part 4 Systems and components Chapter 5 The content of this service document is the subject of intellectual property rights reserved
More informationFire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No.
AS 7240.4 2004 (Incorporating Amendment No. 1) AS 7240.4 2004 Fire detection and alarm systems Part 4: Power supply equipment (ISO 7240-4:2003, MOD) This Australian Standard was prepared by Committee FP-002,
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: E-13480 File No: 822.21 Job Id: 262.1-008042-6 This is to certify: That the Frequency Converter with type designation(s) Emotron FDU 2.0 Issued to CG Drives &
More informationEC TYPE EXAMINATION (MODULE B) CERTIFICATE (EC-US MRA)
HRVATSKI REGISTAR BRODOVA Croatian Register of Shipping EC TYPE EXAMINATION (MODULE B) CERTIFICATE (EC-US MRA) No. 03-001535/031232 THIS IS TO CERTIFY: That Croatian Register of Shipping did undertake
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60598-1 Edition 6.1 2006-09 Edition 6:2003 consolidated with amendment 1:2006 Luminaires Part 1: General requirements and tests This English-language version is derived from
More informationHYUNDAI HEAVY INDUSTRIES CO., LTD.
Certificate No.: 52700-2009-AE-KOR-RvA Initial Certification Date: 07 March, 1997 Valid: 16 March, 2015 16 March, 2018 This is to certify that the management system of CO., LTD. 1000, Bangeojinsunhwando-ro,
More informationSergey Gribanov Head of Technical Service, Germany
MARITIME SHARING OPERATIONAL EXPERIENCE TANKERS Tanker Operator conference, Hamburg, 18.10.2016 Sergey Gribanov Head of Technical Service, Germany SAFER, SMARTER, GREENER AGENDA The DNV GL way to gather
More informationGuideline No.: S-02(201510) S-02 Navigation Light and Signal Light Controllers. Issued date: October 20,2015. China Classification Society
Guideline No.: S-02(201510) S-02 Navigation Light and Signal Light Controllers Issued date: October 20,2015 China Classification Society Foreword: This Guideline is a part of CCS Rules, which contains
More informationSurvey of electrical equipment installed in hazardous areas on tankers
(June 2015) Survey of electrical equipment installed in hazardous areas on tankers 1. Application The recommendations in this document apply for survey of electrical installation in hazardous areas on
More informationFor compliance with Resolution MEPC.174(58), the Certificate is issued on behalf of the Norwegian Maritime Authority.
Certificate No: TAP00000ZS Revision No: 2 This is to certify: That the allast Water Management System with type designation(s) Ecochlor allast Water Management System Issued to Ecochlor, Inc. Maynard,
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00000W1 This is to certify: That the Programmable Electronic System with type designation(s) AC500-eCo / S500-eCo Issued to ABB Automation Products GmbH Heidelberg,
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA0000120 Revision No: 1 This is to certify: That the Programmable Controller with type designation(s) Fail-safe Programmable Logic Controller and Fail-safe Modules
More informationISO INTERNATIONAL STANDARD. Fire detection and alarm systems Part 16: Sound system control and indicating equipment
INTERNATIONAL STANDARD ISO 7240-16 First edition 2007-07-01 Fire detection and alarm systems Part 16: Sound system control and indicating equipment Systèmes de détection et d'alarme d'incendie Partie 16:
More informationFor compliance with Resolution MEPC.174(58), the Certificate is issued on behalf of the Norwegian Maritime Authority.
Certificate No: TP00000ZS Revision No: 1 This is to certify: That the Ballast Water Management System with type designation(s) Ecochlor Ballast Water Management System Issued to Ecochlor, Inc. Maynard
More informationGUIDE TO APPROVAL OF RETROFIT BALLAST WATER MANAGEMENT SYSTEM INSTALLATIONS
GUIDE TO APPROVAL OF RETROFIT BALLAST WATER MANAGEMENT SYSTEM INSTALLATIONS September 2016 DNV GL Approval Ship and Offshore Environmental Protection bwm@dnvgl.com DNV GL Headquarters, Veritasveien 1,
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60092-504 Third edition 2001-03 Electrical installations in ships Part 504: Special features Control and instrumentation Installations électriques à bord des navires Partie 504:
More informationIssued to DISTRIBUIDORA INTERNACIONAL CARMEN, S.A -DICSA- Zaragoza Zaragoza, Spain
Certificate No: TAP00000MD This is to certify: That the Flexible Hoses of Non-Metallic Material with Permanently Fitted Couplings with type designation(s) Trale/Triagle hoses with DICSA stainless/carbon
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11608-4 First edition 2006-03-15 Pen-injectors for medical use Part 4: Requirements and test methods for electronic and electromechanical pen-injectors Stylos-injecteurs à usage
More informationISO 6183 INTERNATIONAL STANDARD. Fire protection equipment Carbon dioxide extinguishing systems for use on premises Design and installation
INTERNATIONAL STANDARD ISO 6183 Second edition 2009-06-15 Fire protection equipment Carbon dioxide extinguishing systems for use on premises Design and installation Équipement de protection contre l'incendie
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00001K7 This is to certify: That the Power Management System with type designation(s) Multi-line 300 Issued to DEIF A/S Skive, Midtjylland, Denmark is found
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION ISO/TS 7240-29 First edition 2017-06 Fire detection and alarm systems Part 29: Video fire detectors Systèmes de détection et d alarme d incendie Partie 29: Titre manque Reference
More informationRULES FOR CLASSIFICATION High speed and light craft. Part 5 Ship types Chapter 5 Patrol boats. Edition December 2015 DNV GL AS
RULES FOR CLASSIFICATION High speed and light craft Edition December 205 Part 5 Ship types Chapter 5 The content of this service document is the subject of intellectual property rights reserved by ("DNV
More informationAccumulated Battery JULY The electronic pdf version of this document found through is the officially binding version
p pproval roramms for U rcos orasato Mutual coto (M)No. 2.9 STANDARD FOR CERTIFICATION Approval Programmes Type Approval Programmes for EU recognised organisation Mutual Recognition (MR) No. MR-E008 Accumulated
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: E-14378 This is to certify: That the Pilot Device with type designation(s) Pilot device Issued to BARTEC GmbH BAD MERGENTHEIM, Germany is found to comply with
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 17338 First edition 2009-08-15 Ships and marine technology Drawings for fire protection Indications of fire rating by divisions for ships and high-speed craft Navires et technologie
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA000000G Revision No: 1 This is to certify: That the Generator Automation System with type designation(s) GENSYS MARINE, GENSYS 2.0 MARINE, MASTER 2.0 MARINE,
More informationLloyd s Register Type Approval System Test Specification Number 3
Working together for a safer world Lloyd s Register Type Approval System Test Specification Number 3 July 2015 Performance Test Specification for Equipment to be used in Marine Applications: Electric Cables
More informationDRAFT TANZANIA STANDARD
EEDC 4 (5157) P3 IEC 62599-1: 2010 DRAFT TANZANIA STANDARD (Draft for comments only) Alarm systems Part 1: Environmental test methods TANZANIA BUREAU OF STANDARDS TBS 2017 First Edition 2017 0 National
More informationEU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE
EU RO MUTUAL RECOGNITION TYPE APPROVAL CERTIFICATE Certificate No: MRA000000V This Certificate is issued to R. Stahl Schaltgeräte GmbH Waldenburg, Germany for Computers and Programmable Logic Controllers
More informationAS/NZS 62560:2017. Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications AS/NZS 62560:2017
AS/NZS 62560:2017 (IEC 62560, Ed. 1.1:2015, MOD) Australian/New Zealand Standard Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications Superseding AS/NZS IEC 62560:2014
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32798-9 SOUTH AFRICAN NATIONAL STANDARD Gas measuring equipment primarily for use in mines Part 5: Fire detectors WARNING This standard references other documents normatively. Published
More informationPAKISTAN STANDARD LED MODULES FOR GENERAL LIGHTING (SAFETY SPECIFICATIONS) PS: _5211/2017 ICS:
PS: _5211/2017 ICS: 29.140.99 PAKISTAN STANDARD LED MODULES FOR GENERAL LIGHTING (SAFETY SPECIFICATIONS) (All Rights Reserved) PAKISTAN STANDARDS AND QUALITY CONTROL AUTHORITY, STANDARDS DEVELOPMENT CENTRE,
More informationANNEX GD-CERT-EX-EN SIT
SITEX ATEX Couplings ATEX ANNEX GD-CERT-EX-EN SIT S.p.A. Viale A. Volta, 2-20090 Cusago (MI) - Italy Tel. +39.02891441 Fax +39.0289144291 - info@sitspa.it www.sitspa.com ATEX Annex This Annex is an integral
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-90 Edition 4.0 2015-08 Household and similar electrical appliances Safety Part 2-90: Particular requirements for commercial microwave ovens INTERNATIONAL ELECTROTECHNICAL
More informationTraining, Assessment, Consultants for Hazardous & Industrial Areas
Training, Assessment, Consultants for Hazardous & Industrial Areas EPIT provides specialist training, assessment and consultancy services for engineers working in hazardous and industrial environments.
More informationFor the compliance with the resolution MEPC.174(58), the Certificate is issued on behalf of the Norwegian Maritime Authority.
Certificate No: TP00000ZS This is to certify: That the Ballast Water Management System with type designation(s) Ecochlor Ballast Water Management System Issued to Ecochlor, Inc. Maynard M, United States
More informationAS/NZS IEC :2013
AS/NZS IEC 61347.2.13:2013 (IEC 61347-2-13, Ed.1.0 2006, MOD) Australian/New Zealand Standard Lamp controlgear Part 2.13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61753-1-3 Edition 1.0 2014-05 Fibre optic interconnecting devices and passive components Performance standard Part 1-3: General and guidance for single-mode fibre optic connector
More informationNotice No. 7. Rules and Regulations for the Classification of Ships, July Issue date: March Working together for a safer world
Notice No. 7 Rules and Regulations for the Classification of Ships, July 2014 The status of this Rule set is amended as shown and is now to be read in conjunction with this and prior Notices. Any corrigenda
More informationINTERNATIONAL STANDARD NORME INTERNATIONALE
IEC 62031 INTERNATIONAL STANDARD NORME INTERNATIONALE Edition 1.0 2008-01 2 62031 IEC:2008 CONTENTS FOREWORD...3 INTRODUCTION...5 1 Scope...6 2 Normative references...6 3 Terms and definitions...7 4 General
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62314 First edition 2006-05 Solid-state relays IEC 2006 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means,
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-59 Third edition 2002-10 Household and similar electrical appliances Safety Part 2-59: Particular requirements for insect killers Appareils électrodomestiques et analogues
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60079-29-2 Edition 2.0 2015-03 Explosive atmospheres Part 29-2: Gas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen INTERNATIONAL
More informationISO INTERNATIONAL STANDARD. Smoke alarms using scattered light, transmitted light or ionization
INTERNATIONAL STANDARD ISO 12239 Second edition 2010-12-15 Smoke alarms using scattered light, transmitted light or ionization Détecteurs de fumée à lumière dispersée, lumière transmise ou ionisation Reference
More informationProcedure for the Approval of New Fire Detection and Alarm Technologies
VdS Guidelines for Automatic Fire Detection and Fire Alarm Systems VdS 3469en Procedure for the Approval of New Fire Detection and Alarm Technologies VdS 3469en : 2016-01 (01) Publisher and publishing
More informationISO INTERNATIONAL STANDARD. Fire detection and alarm systems Part 3: Audible alarm devices
INTERNATIONAL STANDARD ISO 7240-3 First edition 2010-12-15 Fire detection and alarm systems Part 3: Audible alarm devices Systèmes de détection et d'alarme d'incendie Partie 3: Dispositifs d'alarme sonores
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: A-14297 File No: 862.50 Job Id: 262.1-007956-6 This is to certify: That the Programmable Electronic System with type designation(s) AC500-eCo Issued to ABB Automation
More informationC-01 FIRE DECKS AND BULKHEADS
Guideline No.: C-01(201510) C-01 FIRE DECKS AND BULKHEADS Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60079-0 Edition 3.1 2000-06 Edition 3:1998 consolidated with amendment 1:2000 Electrical apparatus for explosive gas atmospheres Part 0: General requirements IEC 2000 Copyright
More informationExplosive atmospheres Part 29-2: Gas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen
IEC 60079-29-2 Edition 2.0 2015-03 REDLINE VERSION colour inside Explosive atmospheres Part 29-2: Gas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen
More informationPROCEDURES FOR APPROVAL OF LIFE-SAVING APPLIANCES AND FIRE SAFETY SYSTEMS, EQUIPMENT AND PRODUCTS
(05/2011) PROCEDURES FOR APPROVAL OF LIFE-SAVING APPLIANCES AND FIRE SAFETY SYSTEMS, EQUIPMENT AND PRODUCTS 3rd EDITION May 2011 Responsible Authority The Design, Equipment and Boating Safety Branch is
More informationTRASCO ATEX Couplings
TRASCO ATEX Couplings ATEX ANNEX GRM-CERT-EX-EN SIT S.p.A. Viale A. Volta, 2-20090 Cusago (MI) - Italy Tel. +39.02891441 Fax +39.0289144291 - info@sitspa.it www.sitspa.it ATEX Annex This Annex is an integral
More informationIECEE OPERATIONAL DOCUMENT
IECEE OD-2055 Edition 2.0 2015-06-03 IECEE OPERATIONAL DOCUMENT IEC System of Conformity Assessment Schemes for Electrotechnical Equipment and Components (IECEE System) Guideline Document on Medical Electrical
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 25762 First edition 2009-07-01 Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites Plastiques Lignes directrices
More informationHIGH-VOLTAGE CABLE TESTING: TYPE TEST EXPERIENCES AND NEW INSIGHTS INTO PRE-QUALIFICATION
HIGH-VOLTAGE CABLE TESTING: TYPE TEST EXPERIENCES AND NEW INSIGHTS INTO PRE-QUALIFICATION Edwin Pultrum, Wouter Sloot, Joaquin Fernandez, René Smeets Presenter: René Smeets PhD, FIEEE Innovation manager
More informationISO INTERNATIONAL STANDARD. Fire detection and alarm systems Part 20: Aspirating smoke detectors
INTERNATIONAL STANDARD ISO 7240-20 First edition 2010-05-15 Fire detection and alarm systems Part 20: Aspirating smoke detectors Systèmes de détection et d'alarme d'incendie Partie 20: Détecteurs de fumée
More informationAS/NZS IEC 62560:2014
AS/NZS IEC 62560:2014 (IEC 62560-2011 Ed 1.0, MOD) Australian/New Zealand Standard Self-ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications AS/NZS IEC 62560:2014 AS/NZS
More informationISO INTERNATIONAL STANDARD. Liquid hydrogen Land vehicle fuel tanks. Hydrogène liquide Réservoirs de carburant pour véhicules terrestres
INTERNATIONAL STANDARD ISO 13985 First edition 2006-11-01 Liquid hydrogen Land vehicle fuel tanks Hydrogène liquide Réservoirs de carburant pour véhicules terrestres Reference number ISO 13985:2006(E)
More informationNotified Body No.: 0575
Certificate No: MEDB00001BE Application of: Council Directive 96/98/EC of 20 December 1996 on Marine Equipment as amended by directive (EU) 2015/559, issued as "Forskrift om Skipsutstyr" by the Norwegian
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60730-2-13 Edition 3.0 2017-10 Automatic electrical controls INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 97.120 ISBN 978-2-8322-4900-0 Warning! Make sure that you obtained
More information