SOUTHVIEW MEDICAL CENTER

Size: px

Start display at page:

Download "SOUTHVIEW MEDICAL CENTER"

Timothy Gardner
5 years ago
Views:

1 PROJECT TITLE: SOUTHVIEW MEDICAL CENTER ENTRANCE VESTIBULE 1997 Miamisburg Centerville Rd. Dayton, Ohio DRAWING INDEX: STRUCTURAL ARCHITECTURAL JUNE 26, 2014 Bulletin #1 - September 12, 2014 AREA OF WORK PROJECT TEAM: CODE AND STANDARDS: PINNACLE ARCHITECTS PROJECT ARCHITECTS 210 N. SAINT CLAIR STREET DAYTON, OHIO HEAPY ENGINEERING MECHANICAL ELECTRICAL CONSULTANTS 1400 WEST DOROTHY LANE DAYTON, OHIO SHELL & MEYER ASSOCIATES STRUCTURAL ENGINEERS 2202 S. PATTERSON BLVD. DAYTON, OHIO THE DRAWINGS HAVE BEEN REVIEWED FOR CONFORMANCE TO: * THE OHIO BUILDING CODE, INCLUDING THE MECHANICAL, ELECTRICAL AND PLUMBING CODES, 2013 EDITION. * N.F.P.A LIFE SAFETY CODE, 2000 EDITION. 2. CODE COMPLIANCE PLANS INDICATE RATED WALL CONSTRUCTION, FIRE SEPARATION AND SMOKE PARTITIONS IN CONFORMANCE WITH APPLICABLE CODES FOR NEW AND REMODELED CONSTRUCTION. 3. EXISTING CONSTRUCTION IS SHOWN TO DEMONSTRATE INTEGRATION OF THE NEW WORK WITH THE EXISTING SYSTEM OF FIRE AND SMOKE BARRIERS. THE EXISTING CONSTRUCTION SHOWN IS PRESUMED TO BE IN COMPLIANCE WITH APPLICABLE CODES. CODE DATA: USE GROUP: CONSTRUCTION TYPE: I-2 (HOSPITAL) 1-A (UNLIMITED AREA) FIRE RESISTANCE RATING REQUIREMENTS FOR BUILDING ELEMENTS PRIMARY STRUCTURAL FRAME - 1 HOUR NON BEARING WALL EXTERIOR - 0 HOUR NON BEARING WALL INTERIOR - 0 HOUR ROOF CONSTRUCTION AND SECONDARY MEMBERS - 1 HOUR RENOVATED AREA: 934 SQ. FT. FIRE SUPPRESSION: FULLY SUPPRESSED IN AREAS OF RENOVATION NUMBER OF STORIES: 1 VICINITY MAP: N PLUMBING MECHANICAL ELECTRICAL ABBREVIATIONS: SYMBOLS LEGEND: SET NO. SEAL

3 LOBBY 000 VESTIBULE 000 AREA OF WORK ROOF PLAN REFLECTED CEILING PLAN PARTIAL FLOOR PLAN ENTRANCE VESTIBULE RENOVATION WALL TYPES

5 MECHANICAL CURB DETAIL ELEVATION OF DECORATIVE WOOD PANEL ROOF MEMBRANE FLASHING DETAIL AREA OF WORK PLAN DETAIL AT DECORATIVE WALL PANEL DETAIL ENTRANCE VESTIBULE RENOVATION GUTTER FLASHING DETAIL RIDGE DETAIL SKYLIGHT CURB DETAIL

13 NOTES ENTRANCE VESTIBULE RENOVATION

14 NOTES 1 1 LINEAR DIFFUSER DUCT CONNECTION NOTES BLOWER COIL UNIT PIPING BLOWER COIL UNIT DRAIN PIPING RETURN GRILLE DUCT CONNECTION ENTRANCE VESTIBULE RENOVATION

15 MECHANICAL SPECIFICATIONS ENTRANCE VESTIBULE RENOVATION

16 1 1 1 ENTRANCE VESTIBULE RENOVATION

17 NOTES: 1. VERIFY FINISH WITH ARCHITECT/OWNER. 2. FIXTURE TO BE MOUNTED IN TRACK SYSTEM; LBL LIGHTING #RAIL-ST-CLEAR-SC-48/49. PROVIDE LOV VOLTAGE TRANSFORMER; LBL LIGHTING #TRANS-RMTE-152. PROVIDE ALL NECESSARY MOUNTING CLIPS, ADAPTERS, CONNECTORS, ETC. AS NEEDED FOR FULLY FUNCTIONAL SYSTEM. FIXTURE SYMBOL FLUOR. QUANTITY INCAN. LAMPS LED FIXTURE WATTAGE G.E. LAMP CAT. NO. FIXTURE VOLTAGE MANUFACTURER & CATALOG NO. OTHER ACCEPTABLE MANUFACTURERS DESCRIPTION WHITE NICKEL TRIM COLOR MOUNTING SIZE (IN.) S--SURFACE R--RECESSED SM-STEM MTD. WM-WALL MTD. C--CHAIN MTD. UC-UNDER CAB. CS-CEIL. SURFACE L2 11 INCLUDED 120 AMERICAN GLASS LIGHT CO. # EDGAR 232-FL-2700K APPROVED EQUAL - - S DIA L3 6 INCLUDED 120 LBL LIGHTING # HB325 - AM-SC-06-LED-MRL APPROVED EQUAL LIGHT TRACK W/ HEADS - S L4 20 INCLUDED 120 AMERICAN GLASS LIGHT CO. # LASZLO -350-S K APPROVED EQUAL WALL SCONCE - S L5 20 INCLUDED 120 PHILIPS # C4X4L10-DL-30K-CCD-W APPROVED EQUAL LED DOWNLIGHT - R CHROME BRONZE STANDARD SEE NOTE WIDTH OR DIAMETER LENGTH OR HEIGHT DEPTH SEE NOTE H1 a H1 (ALL SYMBOLS OR ABBREVIATIONS MIGHT NOT NECESSARILY BE USED ON THIS PROJECT.) WP EM S E E/R 3 ~ B1 b B1 WEATHERPROOF EMERGENCY SURFACE MOUNTED EXISTING REMOVE AND RELOCATE ELECTRICAL EQUIPMENT AND/OR DEVICE. NOTE SYMBOL - APPLIES ONLY TO SHEET ON WHICH NOTE IS SHOWN. DETAIL B SHOWN ON SHEET E2. ELECTRICAL CONNECTION REQUIRED. EXIT LIGHTING FIXTURE. ARROWS AS INDICATED. LIGHTING FIXTURE; CAPITAL LETTER DENOTES FIXTURE TYPE. LOWER CASE LETTER DENOTES SWITCHING ARRANGEMENT. LIGHTING FIXTURE ON EMERGENCY CIRCUIT. W4 60 X1 3 INCLUDED INCLUDED 120 PEERLESS #RD4W4-W20/20-8FT-R8-120-EZB-SCT-LP835-C032 APPROVED EQUAL WALL DIRECT/INDIRECT WM DUAL-LITE #LECSRXWAW APPROVED EQUAL SINGLE-FACED EXIT LIGHT R J JUNCTION BOX. DASHED SYMBOL INDICATES THAT PARTICULAR OUTLET OR DEVICE TO BE REMOVED AND CIRCUITRY MADE CONTINUOUS WHERE REQUIRED. E EXISTING OUTLET OR DEVICE TO REMAIN, MAINTAIN EXISTING CIRCUITRY. 20A-125V HOSPITAL GRADE DUPLEX RECEPTACLE, NEMA 5-20R (18" M.H.), HUBBELL #HBL8300I 20A-125V HOSPITAL GRADE DOUBLE DUPLEX RECEPTACLE. NEMA 5-20R, (18" M.H.) TWO-GANG ASSEMBLY; HUBBELL #HBL8300I 20A-125V HOSPITAL GRADE DUPLEX RECEPTACLE, NEMA 5-20R. (46" M.H. OR AS NOTED ON ARCHITECTURAL ELEVATIONS). HUBBELL #HBL8300I 1. WORK MUST CONFORM TO THE NATIONAL ELECTRICAL CODE, NATIONAL ELECTRICAL SAFETY CODE AND OTHER APPLICABLE LOCAL, STATE AND FEDERAL LAWS, ORDINANCES AND REGULATIONS. WHERE DRAWINGS OR SPECIFICATIONS EXCEED CODE REQUIREMENTS, THE DRAWINGS AND SPECIFICATIONS SHALL GOVERN. INSTALL NO WORK CONTRARY TO MINIMUM LEGAL STANDARDS. 2. ALL ELECTRICAL WORK SHALL BE INSPECTED AND APPROVED BY THE LOCAL AUTHORITY HAVING JURISDICTION. 3. PROVIDE OFFSETS IN SYSTEM RUNS, ADDITIONAL FITTINGS, NECESSARY CONDUIT, PULL BOXES, CONDUCTORS, SWITCHES AND DEVICES REQUIRED TO COMPLETE THE INSTALLATION, OR FOR THE PROPER OPERATION OF THE SYSTEM. 4. AS EACH WIRING SYSTEM IS COMPLETED, IT SHALL BE TESTED FOR CONTINUITY AND FREEDOM FROM GROUNDS. 5. WORK SHALL BE SO PLANNED AND EXECUTED AS TO PROVIDE REASONABLE CONTINUOUS SERVICE OF EXISTING SYSTEMS THROUGHOUT THE CONSTRUCTION PERIOD. WHERE NECESSARY TO DISRUPT SERVICES FOR SHORT PERIODS OF TIME FOR CONNECTION, ALTERATION OR SWITCH OVER, THE OWNER SHALL BE NOTIFIED IN ADVANCE AND OUTAGES SCHEDULED AT THE OWNER'S REASONABLE CONVENIENCE. 6. ELECTRICAL WORK SHALL BE PERFORMED BY A LICENSED ELECTRICAL CONTRACTOR IN ACCORDANCE WITH REQUIREMENTS OF THE JURISDICTION. 7. WHERE CONDUITS ARE TO PASS THRU, ABOVE OR BEHIND EXISTING WALLS, PARTITIONS, FLOORS, ROOF OR CEILING, CUTTING, PATCHING, REFINISHING AND PAINTING OF SAME SHALL BE INCLUDED. CORE DRILLING AND SAW CUTTING SHALL BE UTILIZED WHERE PRACTICAL. CONTRACTOR TO EXAMINE WHERE FLOORS AND WALLS ETC. ARE TO BE CUT FOR PRESENCE OF EXISTING UTILITIES UTILIZING X-RAY TECHNOLOGY IF NECESSARY. 15. CONDUIT SHALL BE 3/4" DIAMETER OR LARGER EXCEPT 1/2" SIZE MAY BE USED FOR THE FOLLOWING CASES: FLEXIBLE CONDUIT, SWITCH LEGS OR CONDUIT CARRYING CONTROL WIRING ONLY. TERMINATIONS OF ALL CONDUITS SHALL BE SECURED BY LOCK- NUTS AND APPROVED BUSHINGS TIGHTENED UP TO SECURE ELECTRICAL AS WELL AS MECHANICAL INTEGRITY OF THE CONDUIT NETWORK. 16. METALLIC CONDUIT, SUPPORTS AND EQUIPMENT SHALL BE GROUNDED IN STRICT ACCORDANCE WITH THE LATEST ISSUE OF THE NEC. THE ENTIRE CONDUIT SYSTEM SHALL BE SECURED BY APPROVED CONNECTORS AND TIGHTENED TO ASSURE ELECTRICAL AS WELL AS MECHANICAL INTEGRITY SO TO PROVIDE AN UNBROKEN GROUNDING PATH. A SEPARATE COPPER GROUNDING CONDUCTOR SHALL BE PULLED WITH ALL BRANCH CIRCUITS. 17. DEVICE AND JUNCTION BOXES GALVANIZED STEEL, CODE GAUGE AND SIZE BY STEEL CITY, RACO, APPLETON OR R&S. BOXES CONNECTING MORE THAN ONE PAIR OF CONDUCTORS TO BE MINIMUM 4" X 4", OR 4" OCTAGONAL SIZE. USE ADAPTER PLATES FOR DEVICES WHERE NUMBER OF CONNECTIONS OR OTHER CONDITIONS DICTATE. WRITE PANEL AND CIRCUIT NUMBER ON JUNCTION BOX WITH PERMANENT MARKER. 18. FIRE ALARM WORK SHALL BE AN EXPANSION/MODIFICATION OF THE EXISTING PYROTRONICS FIRE ALARM SYSTEM. WIRING SHALL BE IN CONDUIT INSTALLED PER DIRECTION OF THE MANUFACTURER. TEST AND DEMONSTRATE SYSTEM. INSTALLER SHALL MEET STATE OF OHIO REQUIREMENTS FOR CERTIFICATION. THE CONTRACTOR OR HIS FIRE ALARM SUPPLIER/INSTALLER SHALL SUBMIT SHOP DRAWINGS TO THE LOCAL FIRE OFFICIAL FOR PERMIT, REVIEW AND APPROVAL 19. GF L F 15 L 15 S S K 20A-125V HOSPITAL GRADE DUPLEX RECEPTACLE, NEMA 5-20R, WITH GROUND FAULT CIRCUIT INTERRUPTER (18" M.H.). HUBBELL #GFDR8300HILA SPECIAL PURPOSE SIMPLEX RECEPTACLE. REFER TO PLANS FOR ADDITIONAL INFORMATION. HEAVY DUTY SPECIFICATION GRADE SINGLE POLE WALL SWITCH (46" M.H.). LOW VOLTAGE "CENTER OFF MOMENTARY TOGGLE WALL SWITCH" (46" M.H.). KEYED SWITCH (46" M.H.). DUAL TECHNOLOGY CEILING MOUNTED VACANCY SENSOR RATED FOR 1000 SQ. FT. DATA OUTLET (18"M.H. OR AS NOTED ON ARCHITECTURAL ELEVATIONS). 4" SQUARE OUTLET BOX WITH SINGLE GANG RING AND BLANK COVERPLATE. STUB AN EMPTY 1" BUSHED CONDUIT ABOVE ACCESSIBLE CEILING. TECHNOLOGY CABLING SHALL BE PROVIDED BY OWNER'S VENDOR. FIRE ALARM CHIME & SIGNAL LIGHT (80" A.F.F.), (# WHEN SHOWN INDICATES CANDELA RATING OF STROBE. WHEN A # IS NOT SHOWN, THE STROBE SHALL BE RATED 15 CANDELA IN CORRIDORS AND 30 CANDELA FOR ALL OTHER LOCATIONS. FIRE ALARM SIGNALING LIGHT (80" A.F.F.), (# WHEN SHOWN INDICATES CANDELA RATING OF STROBE. WHEN A # IS NOT SHOWN, THE STROBE SHALL BE RATED 15 CANDELA IN CORRIDORS AND 30 CANDELA FOR ALL OTHER LOCATIONS. CEILING MOUNTED SMOKE DETECTOR. DUCT MOUNTED SMOKE DETECTOR. 8. THE ELECTRICAL CONTRACTOR SHALL REMOVE EXISTING WORK WHICH IS ASSOCIATED WITH HIS TRADE, AND WHICH WILL BE SUPERFLUOUS WHEN THE NEW SYSTEM IS INSTALLED AND MADE OPERATIONAL. REMOVE INACTIVE WIRING BACK TO THE LAST ACTIVE JUNCTION BOX, PANELBOARD OR PIECE OF EQUIPMENT. 9. FIRESTOPPING ASSEMBLIES SHALL BE TESTED AND RATED IN ACCORDANCE WITH ASTM E814 AND E119 AND LISTED IN ACCORDANCE WITH UL 1479, AS PUBLISHED IN THE UL FIRE RESISTANCE DIRECTORY. FIRESTOPPING SHALL PROVIDE A FIRE RATING EQUAL TO THAT OF THE CONSTRUCTION BEING PENETRATED AND MANUFACTURED BY SPECIFIED TECHNOLOGIES. 10. A COMPLETE ELECTRICAL SYSTEM AS SHOWN ON THE DRAWINGS AND AS SPECIFIED HEREIN. WORK INCLUDES, BUT IS NOT NECESSARILY LIMITED TO THE FOLLOWING PRINCIPAL CATEGORIES: A B C D E F WIRING DEVICES. POWER WIRING. MISCELLANEOUS WIRING AND INTERLOCKS. EQUIPMENT CONNECTIONS. LIGHTING FIXTURES. FIRE ALARM. A. REWORK OF TECHNOLOGY CABLING BY OWNER'S VENDOR. T ELCU PUBLIC ADDRESS CEILING SPEAKER. UTILIZE/EXTEND LOCAL CIRCUIT. MUSIC SPEAKER. CATV OUTLET (90" M.H.) PROVIDE 4" SQ. BOX WITH SINGLE GANG RING AND.75" BUSHED CONDUIT STUBBED ABOVE ACCESSIBLE CEILING. CLOSED CIRCUIT TELEVISION CAMERA (CCTV). NURSE CALL STAFF EMERGENCY STATION. PROVIDE ROUGH-IN PER OWNER'S VENDOR REQUIREMENTS. NURSE CALL CODE BLUE STATION. PROVIDE ROUGH-IN PER OWNER'S VENDOR REQUIREMENTS. PATIENT TOILET STATION WITH EMERGENCY PULL CORD. PROVIDE ROUGH-IN PER OWNER'S VENDOR REQUIREMENTS. UL924 EMERGENCY LIGHTING CONTROL UNIT EQUAL TO WATT STOPPER #ELCU-200. DISCONNECT SWITCH. 11. PROVIDE FLUSH WALL MOUNTED HOSPITAL GRADE WIRING DEVICES AS SHOWN. DEVICES SHALL BE IVORY FOR NORMAL POWER AND RED FOR EMERGENCY POWER. 12. PROVIDE A DEVICE PLATE TO SUIT EACH PARTICULAR APPLICATION. WALL PLATES SHALL BE.032" THICK STAINLESS STEEL. WALL PLATES SHALL BE IDENTIFIED WITH ADHESIVE LABELS TO INDICATE PANEL AND CIRCUIT NUMBER. MOTOR STARTER. COMBINATION MOTOR STARTER AND DISCONNECT SWITCH. ELECTRIC MOTOR. EPO SWITCH (46" M.H.). 13. NONMETALLIC SPRING TYPE INSULATED PRESSURE CONNECTORS AS MADE BY "SCOTCHLOK" OR EQUAL SHALL BE USED FOR SPLICING CONDUCTORS. CONNECTIONS IN NO. 8 AND LARGER SHALL BE SPLICED BY APPROVED PRESSURE TYPE MECHANICAL CONNECTORS AND INSULATED WITH RUBBER OR VINYL TAPE TO ACHIEVE A RESISTANCE EXCEEDING 150% OF THE CONDUCTOR INSULATION. WIRE SHALL BE PULLED ONLY AFTER THAT SECTION OF THE CONDUIT RUN IS PROVEN TO BE CLEAR OF OBSTRUCTIONS, DIRT, MOISTURE AND GREASE. BRANCH CIRCUIT WIRING SHALL BE PULLED WITHOUT THE USE OF LEVERS OR HEAVY PULLING DEVICES. Z CEILING MOUNTED NURSE CALL DOME LIGHT BY OWNER'S VENDOR. NURSE CALL ZONE DOME LIGHT WITH AUDIBLE TONE BY OWNER'S VENDOR. CCTV MONITOR MATRIX SYSTEM CARD READER (46" M.H.); CAT # C 14. CONDUIT SHALL BE USED FOR ALL WIRING. CONDUIT SYSTEMS MAY BE ANY ONE OR COMBINATION OF THE FOLLOWING, WITHIN RESTRICTING LIMITS INDICATED. CONDUIT TYPES NOT LISTED SHALL NOT BE USED. MATRIX SYSTEM EGRESS/MOTION SENSOR; CAT #DS150 MATRIX SYSTEM DOOR STATUS CONTACT; CAT #1078CW A B C D E RIGID GALVANIZED CONDUIT - NO RESTRICTIONS. INTERMEDIATE GRADE GALVANIZED THREADED CONDUIT - NO RESTRICTIONS. THINWALL CONDUIT WITH APPROVED CONNECTOR FITTINGS TO ASSURE GROUNDING CONTINUITY, SUBJECT TO THE FOLLOWING RESTRICTIONS: 1 NOT IN POURED CONCRETE, OUTDOORS, OR UNDERGROUND. FLEXIBLE METAL CONDUIT (GREENFIELD TYPE) GALVANIZED. USE RESTRICTED TO THE FOLLOWING APPLICATIONS: 1 CONNECTIONS TO LIGHTING FIXTURES, MAXIMUM LENGTH 6 FT. LIQUID TIGHT FLEXIBLE METAL CONDUIT WITH WATER TIGHT OIL RESISTANT OUTER PVC COVERING. USE REQUIRED: 1 CONNECTIONS TO MOTORS OR CONTROLS ON DYNAMIC EQUIPMENT. 2 CONNECTIONS TO TRANSFORMERS. ELECTRONIC DOOR LOCK BY G.C. PROVIDE CONNECTION AND INTERFACE WITH MATIX SYSTEM. PHOTOCELL; TORK #2107 ENTRANCE VESTIBULE RENOVATION

18 ENTRANCE VESTIBULE RENOVATION

M001. Revenue Services ISSUED FOR CONSTRUCTION SEPTEMBER. 2, East State Parkway Schaumburg, Illinois Do Not Scale Drawings

M001. Revenue Services ISSUED FOR CONSTRUCTION SEPTEMBER. 2, East State Parkway Schaumburg, Illinois Do Not Scale Drawings 1 T Consultant: NOTES, SYMBOLS & ABBREVIATIONS - MECHANICAL Number Description M001 Vestibule 117 LAN/IT Coffee 115 116 Mail Room 118 114 113 112 Scanning 119 Open Office 101 FIRST FLOOR PLAN - MECHANICAL