DIMAX DIMAX D GB F I E NL. Installation and operating instructions Universal dimmer DIMAX 532. Minimum DIMAX 532.

Size: px

Start display at page:

Download "DIMAX DIMAX D GB F I E NL. Installation and operating instructions Universal dimmer DIMAX 532. Minimum DIMAX 532."

Maryann Carson
5 years ago
Views:

1 GB DIMAX DIMAX A1 A2 Installation and operating instructions Universal dimmer DIMAX 532 D GB F I E NL Minimum 2 1 perm ON N L L DIMAX 532

2 Contents Basic safety instructions 3 Designated use Disposal Connection/installation 4 Control elements 7 General functional description 7 Description of functions 8 Dimming switch-on function 8 Switch-on brightness 8 Adjusting the switch-on brightness 9 Minimum brightness 9 Functions for dimmable energysaving lamps (ESL) 2 10 Function for all lamps 11 Technical data 11 Service address/hotline 12 Standard function with automatic load detection 10 Functions for dimmable energysaving lamps (ESL)

3 Basic safety instructions GB WARNING Danger of death through electric shock or fire! Installation should only be carried out by a qualified electrician! The dimmer is designed for installation on DIN top hat rails (in accordance with EN 60715) Designated use The universal dimmer corresponds to IEC/EN ; it switches and dims the brightness of various light sources such as bulbs, halogen lamps, HV and LV halogen lamps (conventional or with electronic transformer) or dimmable compact fluorescent tubes (energy-saving lamps) or dimmable LED lamps for 230 V. The brightness can be adjusted using the push button attached to the dimmer; for use in enclosed spaces The universal dimmer has a lamp-friendly "soft" on and off system, automatic detection of the load type (not in the case of energy-saving lamps), overheating protection against overload as well as a short-circuit protection Disposal Dispose of the dimmer in an environmentally sound manner (electronic waste) 3

4 Connection/installation WARNING Warning, danger of death through electric shock! Must be installed by qualified electrician! Disconnect power source! Cover or shield any adjacent live components. Ensure device cannot be switched on! Check power supply is disconnected! Earth and bypass! Mount the dimmer in the lower part of the distributor to avoid an excessively high temperature during use. In the case of a service line of >300 W keep an 8 mm distance to the right and left of the device. 4

5 Connection/installation GB Electronic and conventional transformers must always be operated at the minimum load specified by the manufacturer. Only use dimmable energy-saving lamps, normal energy-saving lamps could be irreparably damaged. Disconnect the dimmer before changing the load. When replacing lamps, switch off the voltage supply (at the fuse box) to ensure that the automatic load detection can be reactivated. Do not connect dimmer load connections (L ) in parallel. Do not bypass or short-circuit the dimmer. Do not install an isolating transformer or an adjustable transformer ahead of the dimmer. Dimmable lighting with electrical isolation (e.g. in the bathroom): Work with 12 V halogen lamps. Transformers for 12 V halogen lamps have sufficient electrical isolation. Do not mix wound and electronic transformers in the installation. Do not mix wound transformers and energy-saving lamps/leds in the installation. Do not connect push button with glow lamp. Correct, automatic load detection is only possible with a connected load. 5

6 Only use transformers approved by the manufacturer for dimmer operation. + AC/DC V A1 A2 A1 A2 N N L L L L N L N L Connection with V 230 V connection 6

7 Control elements GB Minimum 2 1 perm ON Rotary switch for setting 4 functions General functional description Dimmer is OFF (Input A1/A2) 1 x short keystroke switch on with saved switch-on brightness (< 1 s) 1 x long keystroke switch on with minimum brightness and dim up until the push button (> 1 s) is released or the max. brightness is obtained (dimming switch-on function) 7

8 1 x short keystroke switch off (< 1 s) 1 x long keystroke Dimmer dims up/down (> 1 s) Dimming stops at the minimum/maximum value When pushing the push button again the dimming direction is changed Description of functions Dimming switch-on function The dimmer switches on with minimum brightness and dims until the push button is released or the max. brightness is obtained. Switch-on brightness The dimmer starts with the taught in switch-on brightness (factory set 100 %). 8

9 Learning switch-on brightness Adjusting the desired switch-on brightness. Press push button A1/A2 until the minimum/maximum value is obtained. Press the push button for another 10 s; the value is taught in. The previous dimming value is saved as switch-on brightness (confirmed by the difference in brightness). Following this, adjustments are made according to the saved switch-on brightness. GB Minimum brightness With the standard function, the minimum brightness is set in such a way that the lamps still light up. In the case of dimmable energy-saving lamps (1 and 2) the minimum brightness can be set directly at the rotary switch. Reason: If there is a drop below a specific brightness value, the energy-saving lamps go out and cease to light up. Tip: Switch on energy-saving lamp for 5 min and then set minimum brightness. 9

10 Minimum 2 1 perm ON Standard function with automatic load detection with adjustable switch-on brightness with dimming switch-on function minimum brightness permanently saved in the device 1 Function for dimmable energy-saving lamps (ESL) 1 with automatic load detection (ideal for manufacturers Megaman, Philips) with minimum brightness (can be adjusted using potentiometer) with switch-on brightness with dimming switch-on function 2 Function for dimmable energy-saving lamps (ESL) 2 no automatic load detection (always with phase control) (ideal for manufacturers Osram, Philips) with minimum brightness with switch-on brightness with dimming switch-on function With some energy-saving lamps there may be radio interference voltages when dimming with phase control. In this case use position 1 (phase control). 10

11 perm ON Function perm ON: Dimmer is always on GB Technical data Operating voltage: 230 V~, +10 % / -15 % Frequency: 50 Hz Power consumption: typically 0.3 W Standby: typically 0.2 W Incandescent lamp load: 500 W* Halogen lamp load: 500 W* Inductive transformer (L): 500 W* Electronic transformer (C): 500 W* Dimmable energy-saving lamps (ESL): 100 W Cable length: max. 100 m Minimum load: none Permissible ambient temperature: -30 C C Protection class: Protection rating: II subject to correct installation IP 20 in accordance with EN * In the case of a load of >300 W keep an 8 mm ventilation distance to the right and left. 11

12 Service address/hotline Service address Theben AG Hohenbergstr Haigerloch GERMANY Telephone +49 (0) Fax +49 (0) 74 74/ Hotline Telephone +49 (0) Fax +49 (0) 74 74/ hotline@theben.de Addresses, telephone numbers etc. 12

DIMAX DIMAX 534 plus D GB F I E nl. Installation and operating instructions Universal dimmer. DIMAX 534 plus

DIMAX DIMAX 534 plus D GB F I E nl. Installation and operating instructions Universal dimmer. DIMAX 534 plus 310455 01 DIMAX DIMAX 534 plus 5340001 A1 A2 GB Installation and operating instructions Universal dimmer DIMAX 534 plus D GB F I E n B1 N DIMAX 534 plus Contents Basic safety instructions 3 Designated