Desigo TM Room Automation The unique solution for enhanced comfort and productivity

Transcription

1 Desigo TM Room Automation The unique solution for enhanced comfort and productivity Siemens AG 2017 siemens.com/desigo

2 Innovative and unique technology from Siemens Desigo Room Automation Integrated room Links all disciplines within a room and ensures the perfect interplay between HVAC, lighting and shading Green Leaf Engages room users to actively involve and reset energy consumption to the optimal level Flexible room The scalable system concept allows you to stagger your investments and offer potential tenants more design freedom Desigo Room Automation RoomOpticontrol Innovative and unique energy efficiency functions detect unnecessary energy consumption Demand-controlled supply Exchange of demand signals from Room Automation with primary plant is the key Room Primary Page 2

3 Unique room concept to ensure the perfect interplay between HVAC, lighting and shading Today, components of a typical building still operate independently Coordinated interaction based on intelligent functionalities from all disciplines Shading Desigo Room Automation Daylight dependent Constant Light Emergency Lighting more Desigo GlareRoom Daylight more protection harvesting Automation Shading Heating Cooling Quality Ventilation Page 3

4 Unique Green Leaf involves room user to save additional energy C Room 403 Green Leaf Room Desk Blind 20.0 C Meeting takes place Room users open blinds on a sunny day Sun radiation heats up the room Red leaf indicates suboptimal operation Setpoint Page 4

5 Unique Green Leaf involves room user to save additional energy C Room 403 Green Leaf Room Desk Blind 20.0 C Press on red leaf restores energy-optimal operation Blinds are closed but allow glare-free lighting Room temperature is assured with lower energy need Setpoint Page 5

6 Desigo Room Automation optimizes comfort by using less energy RoomOptiControl automatically detects unnecessary energy consumption in the room Lighting ON OFF 25.5 C Shading 22.5 C Potential for energy savings and low comfort HVAC Energy-optimized room with enhanced comfort Without Desigo Room Automation With Desigo Room Automation Page 6

7 Weather functions prevent damage Blinds are raised to prevent damage caused by wind and storms Page 7

8 Emergency functions increase safety Blinds are raised to rescue people, lights turn on and ventilation adjusts to increase safety Page 8

9 Constant light control saves money while enhancing comfort Artificial lights are switched on/off and dimmed depending on natural light and information from presence detectors Controlled by integrated brightness sensors Page 9

10 Better indoor air quality increases room users efficiency while saving cost Desigo Room Automation balances comfort and energy consumption Ensures efficiency with demandcontrolled ventilation Display on sensors and room units make air quality visible Poor air quality affects people`s productivity More fresh air may require more energy Page 10

11 Highest energy efficiency with demand-controlled ventilation Room 1 Room 2 Only the required energy is provided by the air handling unit/chiller/burner Exchange of demand signals from Room Automation with primary plant is the key Central functions are part of the tested library and can be easily configured Comfort is never compromised Room 3 BACS efficiency classes EN Highest energy performance, BACS and TBM Advanced BACS and TGM Standard BACS Non-energy-efficient BACS Page 11

12 Flexible floor usage using room segmentation concept with no need for rewiring or reengineering Lighting Lighting Lighting Lighting Shading Shading Shading Shading HVAC HVAC HVAC HVAC Page 12

13 Flexible floor usage using room segmentation concept with no need for rewiring or reengineering Lighting Lighting Lighting Lighting Shading Shading Shading Shading HVAC HVAC HVAC HVAC Today s office buildings are designed for flexible use Rooms must adapt to tenants needs Page 13

14 Flexible floor usage using room segmentation concept with no need for rewiring or reengineering Lighting Lighting Lighting Lighting Shading Shading Shading Shading HVAC HVAC HVAC HVAC Today s office buildings are designed for flexible use Rooms must adapt to tenants needs Page 14

15 Easy replacement of devices allows you to reduce maintenance costs and ensures investment protection 3 2 Easy replacement: 1 Remove defective device 2 Insert new device (no ETS/service tool required) 3 Go back to normal operation 1 Page 15

16 Style, functionality and quality a complete range of room units and sensors to satisfy all requirements Full range of stylish room units, push-buttons, switches and sensors Page 16

17 Long-term investment protection thanks to open standards Open system architecture with no integration effort BACnet in the room eliminates cumbersome integration into management station and superordinate building automation and control system Take advantage of latest network technologies Remote access Page 17

18 Desigo Room Automation reduces planning time Typical market system Siemens solution Lighting HVAC Shading Lighting HVAC Shading ON OFF Page 18

19 Configurable controllers

20 Configurable Room Automation for HVAC, lighting and shading reduces engineering effort dramatically Compact room automation station BACnet/IP, daisy chain On-board room bus KNX PL-Link Trends and alarms Configurable applications HVAC with on-board I/Os Optional lighting and shading with I/O modules on KNX PL-Link Central functions Room bus KNX PL-Link with Room units featuring Green Leaf Push-buttons Sensors, presence detectors VAV controller Lighting/blind actuators KNX PL-Link VAV controller Sensor BACnet/IP Room automation station DXR2.E. Room unit Page 20

21 Programmable controllers

22 Topology Programmable BACnet/IP Configurable and programmable Room automation station PXC3.E7.. Room automation station DXR2.E.. I/O modules TXM1.. KNX PL-Link Touch room operator unit QMX7.E38 DALI gateway PXC3.E16A KNX PL-Link Room operator unit QMX3 Sensor AQR25.. VAV controller GDB/GLB I/O box RXM.. Room operator unit QMX3 Multi-sensor UP258 Sensor AQR25.. Lighting/ shading actuators 3rd-party S-Mode device Emergency lighting Lighting/shading actuators 3rd-party S-Mode devices Page 22

23 Overview Wall mount room operator units and sensors New Product no. (ASN) QMX3.P30 QMX3.P40 QMX3.P70 QMX3.P34 QMX3.P74 QMX3.P02 QMX3.P37 Green Leaf symbol Indoor air quality indication Display and operation for HVAC Push-buttons and LEDs for lighting/shading Temperature sensor Indoor air quality sensor (CO 2 ) Humidity sensor (r.h.) Page 23

24 Overview Presence detectors/vav actuators with KNX PL-Link Product no. (ASN) Description UP258D12 Presence detector Brightness sensor Product no. (ASN) GDB181.1E/KN Description VAV compact controller 5 Nm New GLB181.1E/KN VAV compact controller 10 Nm GDB111.9E/KN 6-way ball valve actuator New Page 24

25 Overview Switches with KNX PL-Link Product no. (ASN) UP220/31 Description Switch, 4 DI UP220/31 UP221.. Switch, 2 buttons UP222.. Switch, 4 buttons UP223.. UP285.. Switch, 6 buttons Switch, 2 buttons UP221 UP222 UP223 UP286.. Switch, 4 buttons UP287.. Switch, 8 buttons UP285 UP286 UP287 Page 25

26 Overview Modules for lighting and shading with KNX PL-Link ASN SSN Description N528D01 5WG15281DB01 2 x lights universal dim, 2 x 300 W or 1 x 500 W for LED and RLC loads New RL260/23 5WG1260-4AB23 4 x binary input, AC/DC V RL512/23 5WG1512-4AB23 1 x light, 16 A, AC 230 V RL513/23 5WG1513-4DB23 3 x lights, 6 A, AC 230 V RL521/23 5WG1521-4AB23 2 x blinds, 6 A, AC 230 V RS510/23 5WG1510-2AB23 2 x lights, 10 A, AC 230 V RS520/23 5WG1520-2AB23 1 x blinds, 6 A, AC 230 V RS525/23 5WG1525-2AB23 1 x light universal dim, 250 VA, AC 230 V UP510/03 5WG1510-2AB03 2 x lights, 10 A, AC 230 V RL.. RS.. AP118 AP641 UP510/13 5WG1510-2AB13 2 x lights, 10 A, AC 230 V UP520/03 5WG1520-2AB03 1 x blinds, 6 A, AC 230 V New UP520/13 5WG1520-2AB13 1 x blinds, 6 A, AC 230 V UP525/03 5WG1525-2AB03 1 x light universal dim, 250 VA, AC 230 V UP525/13 5WG1525-2AB13 1 x light universal dim, 250 VA, AC 230 V AP118 5WG AB01 Control module box AP641 5WG AB01 Room control box UP5../13 UP5../03 N.. Page 26

27 Modular room automation station PXC3.E7. Product no. (ASN) Typical functionality Physical data points on TX I/O modules DALI Total number of data points 1) PXC3.E72 PXC3.E72A 4 rooms/ 8 room segments 4 rooms/ 8 room segments addresses 16 groups 140 On-board power supplies DALI: For 64 ballasts KNX PL-Link: 160 ma TX island bus: 640 ma typically 9 to 10 TX I/O modules PXC3.E75 8 rooms/ 16 room segments PXC3.E75A 8 rooms/ 16 room segments addresses 16 groups 280 1) Total number of data points on TX I/O modules, KNX PL-Link, and DALI Page 27

28 Programmable Room Automation DALI lighting controller PXC3.E16A BACnet/IP PXC3.E16A PXC3.E7..A BACnet/IP DXR2.E.. DALI KNX PL-Link PXC3.E16A Room units incl. push-buttons for light DALI Central lighting installation With multiple DALI lines Push-buttons and/or sensors on KNX PL-Link or TX I/O modules Decentralized HVAC installation One lighting controller for multiple rooms Lights are operated via push-buttons connected via KNX PL-Link of the HVAC room automation stations (DXR2.E..) Page 28

29 Programmable Room Automation DALI emergency lighting Desigo CC PXC3.E..A Escape route lighting Decentralized DALI EML and batteries Antipanic light Standard DALI gear Functionality 1. Tests started via schedule Functional test Short duration test Duration test 2. Alarming if test failed 3. Generate test reports 4. Store-and-print test reports Emergency lighting is part of one system with all other disciplines Same management station for EML, lighting, shading, HVAC easier to operate Share network and infrastructure with Room Automation lower cost Page 29

30 Desigo CC V3.0 Restricted Siemens AG 2017

31 1. Introduction : BT

32 C. Desigo CC Architecture Windows serveur bit Windows bit Multiple client workstations / Multiple languages Facility management Energy management Energy trading Sustainability reports Desigo CC integrates all disciplines from Siemens, our customers and third party Comfort Powermanagement Access Security Heating & Cooling Video Air handling Desigo CC Intrusion Lighting Mass notification Safety Shading Fire Desigo CC will be used world wide Page 35

33 2. Desigo CC Key Arguments

34 Desigo CC the leading building management platform: open, modular & flexible, efficient and user-friendly Desigo CC Open platform Modular & flexible Efficient User-friendly and easy Open standards (BACnet, OPC, Modbus ) Web services (northbound) Driver SDKs (southbound) Ecosystem Single or multi-discipline Scalable in size Modular and extendable in applications and features Strong workflow concept Assisted event treatment Easy engineering Remote access Unique state-of-the-art UI design One platform to learn and operate Multiple screen approach Advanced vector graphics Page 37

35 Portfolio CORE CORE + Single Discipline CORE + Multi Disciplines Totally Integrated Solution Page 38

36 Standard protocols and interfaces which makes it a truly open system Desigo CC simplifies work processes: Consistent workflow Standardized interfaces Open for global standards GUI Page 39

37 Suitable for all system sizes Small systems (lean, single-seat setup) Medium to large systems (example for distributed sites, campuses, etc.) Management Level Desigo CC Monitor Desigo CC Combined main server and client Desigo CC Monitor Desigo CC Main web server Win. App. Client Click once Web Client Browser Subsystems Front-end processor (to enable load balancing) Page 40

38 Multiserver architecture Multiserver architecture for discipline segmentation or redundancy STATIONARY Web Desigo CC Desigo CC web clients Decentralized servers Page 41

39 Desigo CC Web Desigo CC can be operated from any stationary device or with web clients Page 42

40 Desigo CC mobile app Desigo CC App offers the possibility to view events and command via mobile devices Page 43

41 3. Desigo CC Features - User interface and Navigation

42 Easy to use and operate Desigo CC has an intuitive user interface System browser Summary bar Primary panel Operation Secondary panel Consistent workflow Standardized interfaces Page 45

43 Summary bar Page 46

44 System Browser Page 47

45 Primary Panel Page 48

46 Secondary Panel Page 49

47 Operation Page 50

48 Operation Operation Page 51

49 Page 52

50 3. Desigo CC Features - Plans and graphics

51 . Desigo CC Graphics Vector graphics Filtration per discipline Layers Page 54

52 . Desigo CC Editeur graphique Online adaptation Integrated simulator Import AutoCAD Import Bitmap Handling of the layers Symbol library for each discipline Advanced graphic editor Page 55

53 3. Desigo CC Features - Alarm Management

54 . Desigo CC Management of alarms and events General view Quick treatment Treatment per investigation Page 57

55 . Desigo CC Assisted treatment Guided and secure treatment Page 58

56 3. Desigo CC Features - Specific features (linked to disciplines)

57 . Desigo CC Video Display videostream Operating PTZ Presetting activation Access to the recordings Manuel or automatic activation of the recordings Supported VMS : Siveillance 7.0c/7.0d Milestone 7.0c/7.0d Page 60

58 . Desigo CC Event log Chronological overview of events Filtration Selection Overview of the latest events by selecting one point Page 61

59 . Desigo CC Report Adjustable reports that can contain tables as well as graphical views or trend displays. Can be printed, saved or sent by mail. Page 62

60 View of the different adjustable reports in Desigo CC Page 63

61 . Desigo CC Remote notification Message sent by: Mail SMS ESPA Escalation process Page 64

62 . Desigo CC Reactions Reactions based on time, operation mode or event. Allows reactions between the different systems Page 65

63 . Desigo CC Trends Display shifted in time to allow a quick and detailed comparision. Page 66

64 . Desigo CC Time and calendar programming Management of BACnet clocks and calendars Management of internal clocks and calendars to Desigo CC Same apparence as Outlook Page 67

65 3. Energy and power management

66 OF F OF F OF F Gestion d'énergie et de puissance de Desigo CC Modbus TCP, connectivity CEI Analyseur de qualité du signal électrique Compteur Siemens Compteur tiers Disjoncteur +352 (43843) 953 Standart library for a selection of Siemens electrical signal qualityanalyzers CEI connectivity of electrical signal quality equipment Standard libraries containing a selection of Siemens counters and circuit breakers Failure notification of the quality of the electrical signal and loading of the corresponding reports Symbols and visualisation graphics of electrical distribution Enhanced system operation through an integrated or stand-alone approach Optimization of demand peaks through manual control or automation adjustment Anticipate preventative measures to avoid system failures Power consumption, load profile ratio, maximum power ratio Page 69

67 Feel free to contact us Frédéric Dumon Area Sales Professional Stefan Molitor Site Installation Project Manager 20, Rue des Peupliers 2328 Luxembourg Luxembourg Phone: +352 (43843) (43843) 947 Mobile: siemens.lu Page 70