Advanced Fiber Optic Test Equipment Terahertz Technologies Inc.

Transcription

1 Advanced Fiber Optic Test Equipment Terahertz Technologies Inc U.S.-OTDRS Clear Rd. Oriskany, NY

2 FT E-7500A OTDR Onboard Help System Select the help Icon and the OTDR displays a list of help subjects unique to the current application. Auto Test The AutoTest feature does a quick test of the fiber conditions, sets the range and pulse width, then produces a trace of the fiber under test. This is ideal to use if unfamiliar with OTDR testing or the approximate length of the fiber is not known. Construction Mode This feature assist with testing a large number of fi bers with similar settings. By pressing just one button the OTDR will test a fi ber at two wavelengths, save each test and then display both tests for review. Trace Analysis The trace analysis screen gives users the ability to quickly determine if the fi ber meets measurement criteria with its Pass/Fail capabilities. Instant On Fast Real time 36 db Dynamic Range Event Table with Pass/Fail Feature 1 Meter Dead Zone SM, MM, Triple and Quad Units Available Integrated Video Inspection System Interchangeable Fiber Optic Connectors One Button Fault Finder Automated Construction Mode Trace Overlay Capability Onboard Memory for ~500 traces Auto- Loss Test Set Visual Fault Locator USB Flash Drive Port and Mini USB/PC Port Context Sensitive Help Lightweight Rugged Enclosure Easy To Read Color Display CertSoft Report Generation Software Suite Long Battery Life Integrated Loss Test Set The FTE7500A has an integrated Loss Test Set. When used with compatible equipment from TTI s 1500 series or other TTI OTDRs the auto wavelength and auto test capabilities will speed testing and help eliminate user error. Integrated Visual Fault Locator Use the VFL to locate near end breaks, poor splices, and broken connectors in fi ber optic cables or use it to identify fi bers at the far end of a link. File Storage and File Transfer There is onboard storage for up to ~500 traces. Trace fi les are easily transferred for use with the CertSoft software suite via USB/ PC or USB fl ash drive ports. Integrated Video Inspection Ensure accurate test and protect equipment from damage, by inspecting connectors with the integrated video inspection system. Image fi les may be stored, allowing users to include connector images with test documents. Trace Analysis and Reporting Project reporting and documentation is fast and easy with the Pass/Fail feature, onboard event table and the supplied CertSoft reporting software.

3 Company Name: Allied Customer: Acme Test Date: 6/15/99 Operator: Joe Jones Model Number: FTE500A-1315 Fiber Type: SMF28E Serial Number: 1985 Cable Type: 144LT Cable ID: HE6795 Location From: Administration Fiber ID: 005 Location To: Outpost Absolute dbm Relative db Reference 0 dbm Absolute dbm dbm Relative db db Reference 0 dbm 0 dbm Event # P/F Distance Splice (< 0.8dB) 2 Point db/km Type (ORL < -60) 1 Fail 0.427Km 2.26 db db db db 2 Pass 0.571Km 0.80 db db db Splice 3 Fail 0.823Km 2.47 db db db db 4 Pass 1.133Km 4.93 db db db End Printed: 10/31/ of 1 Dynamic Range Pulse Width Units of Measurement Event Dead Zone Attenuation Dead Zone Distance Uncertainty Full Scale Distance Range Typical Real-Time Refresh Rate OTDR 850, 1300, 1310, 1490,1550, 1625nm ±20nm 26/27dB MM, 36/34dB SM, 36/34/34 TRI 5-20,000 ns km, kf, mi 1m 4m.125-8m ±(0.75m % x distance + sampling resolution) 1-64km MM, 1-240km SM 2 Hz Group Index of Refraction (GIR) Linearity Memory Capacity Memory Type Power Supply / Charger Battery Storage Temperature Operating Temperature Range Dimensions (w/out rubber boot ) Weight Communications Ports Connector Styles FTE-7500A Specifications ±.05 db/db ~500 Traces Internal and Flash Drive Input VAC, 47-63Hz, 0.4A, Output 13.6V, 0.57A 8 AA NiMH - 8hr Operation -20 to 60 C -10 to 40 C 7.75 L x 4.5 W x 2.25 H (197mm L x 114mm W x 57mm H) 2 lbs USB/PC & USB Flash Drive Ports FC, ST, SC Interchangeable Emitter Type Laser Safety Class Connector Type Output Power Detector Type Connector Type Measurement Range Calibrated s Units of Measurement Power Measurement Uncertainty Auto Test Range Available s Output Power Laser Safety Classification Modulation Modes Visual Fault Locator Power Meter Light Source Laser 650nm ±5nm Class IIFDA21 CFR & IEC 825-1: mm Universal 1mW Max. InGaAs 2.5mm Interchangeable +5 to -77dBm (CATV +25 to -57dBm) 850,1300,1310,1490,1550,1625nm dbm, db.01 db ± 0.18 db under reference conditions, ± 0.25 db from 0 to -65 dbm, ± 0.35 db from 0 to +5 dbm and from -65 to -77 dbm 0 to -40dB 850, 1300, 1310, 1490, 1550, 1625 nm ±20nm (Light Source s are Limited by the OTDR Configuration) 0 dbm 1625nm) Class I Safety Per FDA/CDRH and IEC Regulation CW, 270 Hz, 1000 Hz, 2000 Hz Specifi cations are subject to change without notice: Accessories Provided Universal Power Adapter w/interchangeable Mains, Interchangeable FC/ST and SC Adapters, Software, Manual on CD and Protective Rubber Boot File Management System can copy to USB drive or to PC with Supplied Software Specifi cations are subject to change without notice. FTE-7500A-8513 FTE-7500A-1315 FTE-7500A-QUAD FTE-7500A-TRI CI-1100 FTE-SCASE-LG Ordering Information MM 850/1300nm OTDR with Video Scope, LTS and VFL (Scope Probe Sold Separately) SM 1310/1550nm OTDR with Video Scope, LTS and VFL (Scope Probe Sold Separately) Quad 850/1300/ 1310/1550nm OTDR with Video Scope, LTS and VFL (Scope Probe Sold Separately) SM 1310/1550/1625 OTDR With Video Scope, LTS and VFL ( Scope Probe Sold Separately) Video Probe Soft Case for FTE-6000, 7500 and 8000 Series Add a C to the end part the number for CATV version LTS. Video Scope Image Certifi cation Software with attached video scope image Full featured trace analysis with pass/ fail feature.

4 FTE-7000A OTDR Instant On, Immediate Scan Touch Screen, Keypad or Tablet Control CW & Fiber Identifier Light Source Bluetooth Android Tablet Operation 36 db Dynamic Range W/1 meter Dead Zone Video Scope With Pass/Fail Grading Zones Auto- Power Meter Bidirectional Trace Analysis Fib-R-Map Event Analyzer SM, MM, Triple and Quad Units Available Full Auto, Construction and Expert Modes Live Fiber Detection Onboard Memory of ~1000 traces CertSoft Report Software with.sor Capability Macro Bend and Bidirectional Analysis Touch Screen Operation There are three methods of operation for the FTE-7000A. There is a hard button method directly on the units keypad, the bright 4 inch display allows for touch screen operation and if a larger display is desired, this OTDR may be operated via Bluetooth on any compatible Android device. Integrated Video Inspection Ensure accurate test and protect equipment from damage, by inspecting connectors with the integrated video inspection system. The video scope includes an IEC pass/fail grading zone system. Image fi les may be stored, allowing users to include connector images with test documents. Schematic View Trace Analysis The FTE7000A displays trace analysis in schematic and table views. The trace analysis screen gives users the ability to quickly review the fi ber and determine if it meets measurement criteria with its Pass/Fail capabilities. Auto Test The AutoTest feature does a quick test of the fiber conditions, sets the range and pulse width, then produces a trace of the fiber under test at the selected wavelength. This is ideal to use if unfamiliar with OTDR testing or the approximate length of the fiber is not known. Integrated Loss Test Set The FTE7000A has an integrated Loss Test Set. When used with compatible equipment from TTI s 1500 series or other TTI OTDRs the auto wavelength recognition will speed testing and help eliminate user error. (Not available on quad wavelength units) File Storage and File Transfer There is onboard storage for up to ~1000 traces. Trace fi les are easily transferred for use with the CertSoft software suite via USB/ PC ports. preliminary CertSoft Software Suite Project reporting and documentation is fast and easy with the supplied CertSoft reporting software. Reports can include, trace graph, schematic and table analysis, loss test table and connector image. Project Management Use the parameter screen to enter all parameter and threshold settings for a project, name the project and store fi les to the active project folder.

5 FTE-7000A Specifications Dynamic Range Pulse Width Units of Measurement Event Dead Zone Attenuation Dead Zone Distance Uncertainty Full Scale Distance Range Typical Real-Time Refresh Rate OTDR 850, 1300, 1310,1490,1550, 1625nm ±20nm 26/27dB MM, 36/34dB SM 5-20,000 ns km, kf, mi 1m 4m.125-8m ±(0.75m % x distance + sampling resolution) 1-64km MM, 1-240km SM 2 Hz Group Index of Refraction (GIR) Linearity Memory Capacity Memory Type Power Supply / Charger Battery Storage Temperature Operating Temperature Range ±.05 db/db ~500 Traces Internal and Flash Drive Input VAC, 50-60Hz, 0.3A, Output 9V, 0.67A prelimina inar 4 NiMH, 6hr -20 to 60 C -10 to 40 C Detector Type Connector Type Measurement Range Calibrated ate s Units of Measurement Power Measurement Uncertainty ary y Auto Test Range Available s Output Power Laser Safety Classifi cation Modulation Modes Power Meter InGaAs 2.5mm Interchangeable +5 to -77dBm (CATV +25 to -57dBm) 850,1300,1310,1490,1550,1625nm dbm, db.01 db ± 0.18 db under reference conditions, ± 0.25 db from 0 to -65 dbm, ± 0.35 db from 0 to +5 dbm and from -65 to -77 dbm Light Source 0 to -40dB 850, 1300, 1310, 1490, 1550, 1625 nm ±20nm (Light Source s are Limited by the OTDR Configuration) 0 dbm 1625nm) Class I Safety Per FDA/CDRH and IEC Regulation CW, 270 Hz, 1000 Hz, 2000 Hz Specifi cations are subject to change without notice: ar Dimensions (with rubber boot ) Weight Communications ports Connector Styles 8.62 L x 4.25 W x H (219mm L x 108mm W x 60mm H) 1.8 lbs (.82 kg) USB/PC & USB Flash Drive Ports FC, ST, SC Interchangeable Accessories Provided FTE-7000A-8513 FTE-7000A-1315 FTE-7000A-QUAD FTE-7000A FTE-7500A VIS-300 Universal Power Adapter w/ interchangeable mains, Interchangeable FC/ST and SC Adapters, Software, Manual on CD and Protective Rubber Boot Specifi cations are subject to change without notice. Ordering Information MM 850/1300nm OTDR with LTS SM 1310/1550nm OTDR with LTS Quad 850/1300/1310/1550nm OTDR with LTS Triple 1310/1490/1550nm OTDR with LTS Triple 1310/ nm OTDR with LTS Video Probe Add a C to the end part the number for CATV version LTS. Intuitive Expert Parameter Screen Fib-R-Map Schematic Event Analysis Large - Easy to Read Trace, Icons and Measurements Pass Fail Video Scope Feature

6 FTE-7800 Multi-Task OTDR Multi-Task OTDR Functions: 1310/1550nm Dual OTDR 8 Channel CWDM Channel Analyzer Broadband Power Meter Video Inspection Scope Stable Light Source Visual Fault Locator Auto Test The AutoTest feature of the OTDR does a quick test of the fi ber conditions, sets the range and pulse width, then produces a trace of the fi ber under test. This is ideal to use if unfamiliar with OTDR testing or the approximate length of the fi ber is not known. 8 Channel CWDM Channel Analyzer Simultaneously test the top 8 wavelengths ( ) on the CWDM ITU Grid Construction Mode This OTDR feature assist with testing a large number of fi bers with similar settings. By pressing just one button the OTDR will test a fi ber at two wavelengths, save each test and then display both tests for review. Trace Analysis The Trace analysis system gives the user the ability to quickly determine if the fi ber meets measurement criteria with its Pass/Fail capabilities. Integrated Loss Test Set The FTE7800 has an integrated Loss Test Set. When used with compatible equipment from TTI s 1500 series or other TTI OTDRs. OTDR Features 36/34dB Dynamic Range Short 1 meter Dead Zone 1310/1550 s Onboard Memory of ~500 traces Event Table with Pass/Fail Feature Channel Analyzer Features 8 Channels, nm ~1/4 Second Update Bar Graph and Table Displays Impact Resistant Boot Stores 1000 CWDM Analyzer Scans General Features Instant On Visible Fault Locator Long Battery Life USB/PC and USB Flash Ports Broadband Power Meter and CW Source CertSoft software suite Included Integrated Visual Fault Locator Use the VFL to locate near end breaks, poor splices, and broken connectors in fi ber optic cables or to identify fi bers at the far end of a link. File Storage and File Transfer There is fi le storage for up to 1000 OTDR traces. Trace fi les are easily transferred for use with CertSoft reporting software suite via the USB/PC port or USB the fl ash drive port. Integrated Video Inspection Ensure accurate test and protect equipment from damage, by inspecting connectors with the integrated video inspection system. Files may be stored, allowing users to include connector images with test documents. Trace Analysis and Reporting Project reporting and documentation is fast and easy with a Pass/Fail feature, onboard event table and the supplied CertSoft reporting software with multi-trace capability.

7 FTE-7800 Multi-Task OTDR Specifications Dynamic Range Pulse Width Units of Measurement Event Dead zone Attenuation Dead Zone Distance Uncertainty Full Scale Distance Range Typical Real-Time Refresh Rate Group Index of Refraction (GIR) Linearity Memory Capacity Memory Type Power Supply / Charger Battery Storage Temperature Operating Temperature Range Dimensions (w/out rubber boot ) Weight Communications Ports Connector Styles OTDR 1310, 1550 nm ±20nm 36/34dB 5-20,000 ns km, kf, mi 1m 5m.125-8m ±(0.75m % x distance + sampling resolution) 1-64km MM, 1-240km SM 2 Hz ±.05 db/db ~500 Traces Internal and Flash Drive Input VAC, 47-63Hz, 0.4A, Output 13.6V, 0.57A 8hr -20 to 60 C -10 to 50 C 7.75 L x 4.5 W x 2.25 H (197mm L x 114mm W x 57mm H) 2 lbs USB/PC & USB Flash Drive Ports FC, ST, SC Interchangeable Channel Spacing Channel Pass Band Channel Power Range Absolute Accuracy Max. Composite Power PDL Adjacent Channel Isolation Measurement Time Readout Return Loss Optical Interface Graphical Display Memory Capacity Detector Type Connector Type Measurement Range Calibrated s Units of Measurement CWDM Analyzer nm 20nm ± 6.5nm -5dBm to -50dBm ± 1dB +23dBm ±0.2dB 30dB <1/2 Second 0.01dB >40dB Universal UPS (FC/SC Supplied) Bar Graph and Table View 1000 Scans Specifi cations are subject to change without notice: Power Meter InGaAs 2.5mm Interchangeable +5 to -77dBm (CATV +25 to -57dBm) 850,1300,1310,1490,1550,1625nm dbm, db.01 db Accessories Provided Universal Power Adapter w/us, UK, Continental Europe, and Australian Plugs, Interchangeable FC/ST and SC Adapters, Manual on CD, CertSoft Software Suite, Protective Rubber Boot Power Measurement Uncertainty Auto Test Range ± 0.18 db under reference conditions, ± 0.25 db from 0 to -65 dbm, ± 0.35 db from 0 to +5 dbm and from -65 to -77 dbm 0 to -40dB Specifi cations are subject to change without notice: Specifications are subject to change without notice: VFL CW Light Source Emitter Type Laser 650nm ±5nm s 1310 and 1550 ±20nm Laser Safety Class Connector Type Class IIFDA21 CFR & IEC 825-1: mm Universal Output Power Laser Safety Classification 0 dbm 1625nm) Class I Safety Per FDA/CDRH and IEC Regulation Output Power 1mW Max. Modulation Modes CW, 270 Hz, 1000 Hz, 2000 Hz Specifications are subject to change without notice: Specifications are subject to change without notice:

8 FTE-7500A PON OTDR Active Fiber Testing Use the 1625nm active port for in service maintenance/ troubleshooting testing of PON Networks. Auto Test The AutoTest feature of the OTDR does a quick test of the fi ber conditions, sets the range and pulse width, then produces a trace of the fi ber under test. This is ideal to use if unfamiliar with OTDR testing or the approximate length of the fi ber is not known. Construction Mode This feature assist with testing a large number of fi bers with similar settings. By pressing just one button the OTDR will test a fi ber at two wavelengths, save each test and then display both tests for review. Trace Analysis The Trace analysis system gives the user the ability to quickly determine if the fi ber meets measurement criteria with its Pass/Fail capabilities. Instant On Fast Real time 35 db Dynamic Range Event Table with Pass/Fail Feature Short Dead Zone Test Through 1/64 Splitters Video Inspection Capability One Button Testing Interchangeable Fiber Optic Connectors Trace Overlay Capability Onboard Memory for ~500 traces Integrated Auto- Loss Test Set Visual Fault Locator USB Flash Drive Port and Mini USB/PC Port On-Screen Tutorials Light Weight Rugged Enclosure Easy To Read Color Display CertSoft Reporting Software Long Battery Life Integrated Loss Test Set The PON OTDR has an integrated Loss Test Set. When used with compatible equipment from TTI s 1500 series or other TTI OTDRs the auto wavelength and auto test capabilities will speed testing and help eliminate user errors. Visual Fault Locator Use the VFL to locate near end breaks, poor splices, and broken connectors in fi ber optic cables or to identify fi bers at the far end of a link. Onboard and External File Storage There is fi le storage for up to ~500 traces. Trace fi les are easily transferred for use with CertSoft software suite via the USB/PC port or the USB fl ash drive port. Integrated Video Inspection Ensure accurate test and protect equipment from damage, by inspecting connectors with the integrated video inspection system. Files may be stored, allowing users to include connector images with test documents. Trace Analysis and Reporting Project reporting and documentation is fast and easy with a Pass/Fail feature, onboard event table and the supplied CertSoft reporting software suite with multi-trace capability.

9 Company Name: FIS Customer: CityHall Test Date: 2/09/09 Operator: Joe Model Number: OVX1315LTS Serial Number: 1509 Cable ID: 1-39 Fiber ID: 12 Fiber Type: SMF28E Cable Type: LT Location From: City Hall Location To: Fire House Event # P/F Distance Splice 2 Point db/km Event Type 1 Fail Km 0.68 db db db 45.7 db 2 Pass Km 1.16 db db db Splice 3 Pass Km 1.09 db db db 57.9 db 4 Pass Km 1.08 db db db 66.7 db 5 Fail Km db db db 63.7 db End? Pass Km N/A 4.75 db db Link FTE-7500A PON OTDR Specifications OTDR VFL Dynamic Range Pulse Width Units of Measurement Event Dead zone 1310, 1550, 1625nm ±20nm 35/34/34dB 5-20,000 ns km, kf, mi 1m Emitter Type Laser Safety Class Connector Type Output Power Laser 650nm ±5nm Class IIFDA21 CFR & IEC 825-1: mm Universal 1mW Max. Attenuation Dead Zone Distance Uncertainty Full Scale Distance Range Typical Real-time Refresh Rate 4m.125-8m ±(0.75m % x distance + sampling resolution) 1-64km MM, 1-240km SM 4 Hz Group Index of Refraction (GIR) Linearity Memory Capacity Memory Type Power Supply / Charger Battery Storage Temperature Operating Temperature Range Dimensions (w/out rubber boot ) Weight Communications Ports ±.05 db/db ~500 Traces Internal and Flash Drive Input VAC, 47-63Hz, 0.4A, Output 13.6V, 0.57A 8hr -20 to 60 C -10 to 50 C 7.75 L x 4.5 W x 2.25 H (197mm L x 114mm W x 57mm H) 2 lbs USB/PC & USB Flash Drive Ports Detector Type Connector Type Measurement Range Calibrated s Units of Measurement Power Measurement Uncertainty Auto Test Range s Output Power Laser Safety Classification Modulation Modes Power Meter CW Light Source InGaAs 2.5mm Interchangeable +5 to -77dBm (CATV +25 to -57dBm) 850,1300,1310,1490,1550,1625nm dbm, db.01 db ± 0.18 db under reference conditions, ± 0.25 db from 0 to -65 dbm, ± 0.35 db from 0 to +5 dbm and from -65 to -77 dbm 0 to -40dB 1310, 1550, 1625 nm ±20nm 0 dbm 1625nm) Class I Safety Per FDA/CDRH and IEC Regulation CW, 270 Hz, 1000 Hz, 2000 Hz Specifications are subject to change without notice: Connector Styles Accessories Provided FC, ST, SC Interchangeable Universal Power Adapter w/us, UK, Continental Europe, and Australian Plugs, Interchangeable FC/ST and SC Adapters, Manual on CD, CertSoft Software Suite, Protective Rubber Boot Use the fi le management system to Copy fi les to USB drive or to PC for Use with CertSoft software suite FTE ACT Specifications are subject to change without notice: Ordering Information Dark Fiber Port - SM 1310/1550nm Active Port 1625nm with LTS, Video Scope and VFL (Probe Sold Separately) Video scope images may be stored and included with Cert- Soft test reports Trace analysis with pass/fail thresholds CI-1100 FTE-SCASE-LG Video Probe Soft Case for FTE-6000, 7500 and 8000 Series CertSoft test report with attached video scope image

10 FTE-7500A-CWDM OTDR Flexible s Configuration Standard units are offered in the most common CWDM wavelength combinations. Custom wavelength confi gurations are available. Auto Test The AutoTest feature of the OTDR does a quick test of the fi ber conditions, sets the range and pulse width, then produces a trace of the fi ber under test. This is ideal to use if unfamiliar with OTDR testing or the approximate length of the fi ber is not known. Trace Analysis The Trace analysis system gives the user the ability to quickly determine if the fi ber meets measurement criteria with its Pass/Fail capabilities. Integrated Power Meter selectable broadband power meter. Instant On Fast Real Time 32 db Dynamic Range Flexible Configuration Event Table with Pass/Fail Feature Short Dead Zone Interchangeable Fiber Optic Connectors Video Inspection Capability Broadband Power Meter Trace Overlay Capability Onboard Memory for ~500 traces Visual Fault Locator USB Flash Drive Port and Mini USB/PC Port Context Sensitive Help Light Weight Rugged Enclosure Easy To Read Color Display CertSoft Software Suite Long Battery Life Integrated Visual Fault Locator Use the VFL to locate near end breaks, poor splices, and broken connectors in fi ber optic cables or to identify fi bers at the far end of a link. Onboard and External File Storage There is fi le storage for up to ~500 traces. Trace fi les are easily transferred for use with CertSoft software suite via the USB/PC port or the USB fl ash drive port. Integrated Video Inspection Ensure accurate test and protect equipment from damage, by inspecting connectors with the integrated video inspection system. Files may be stored, allowing users to include connector images with test documents. Trace Analysis and Reporting Project reporting and documentation is fast and easy with a Pass/Fail feature, onboard event table and the supplied CertSoft reporting software with multi-trace capability.

11 Company Name: FIS Customer: CityHall Test Date: 2/09/09 Operator: Joe Model Number: OVX1315LTS Serial Number: 1509 Cable ID: 1-39 Fiber ID: 12 Fiber Type: SMF28E Cable Type: LT Location From: City Hall Location To: Fire House Event # P/F Distance Splice 2 Point db/km Event Type 1 Fail Km 0.68 db db db 45.7 db 2 Pass Km 1.16 db db db Splice 3 Pass Km 1.09 db db db 57.9 db 4 Pass Km 1.08 db db db 66.7 db 5 Fail Km db db db 63.7 db End? Pass Km N/A 4.75 db db Link FTE-7500A-CWDM OTDR Specifications OTDR Power Meter Dynamic Range Pulse Width Units of Measurement 1471/1491/1511/1531nm ±3nm or 1551/1571/1591/1611nm ±3nm 32 db 5-20,000 ns km, kf, mi Detector Type Connector Type Measurement Range Calibrated s InGaAs 2.5mm Interchangeable +5 to -77dB (CATV to -57dB) 850/1300/1310/131471/1491/1511/ 1531/1551/1571/1591/1611nm Event Dead zone 1m Units of Measurement dbm, db Attenuation Dead Zone 4m.01 db Distance Uncertainty.125-8m ±(0.75m % x distance + sampling resolution) Power Measurement Uncertainty ± 0.18 db under reference conditions, ± 0.25 db from 0 to -65 dbm, ± 0.35 db from 0 to +5 dbm and from -65 to -77 dbm Full Scale Distance Range 1-240km SM Power input Range +5 to -77dBm Typical Real-time Refresh Rate 2 Hz Group Index of Refraction (GIR) Linearity Memory Capacity Memory Type Power Supply / Charger Battery Storage Temperature Operating Temperature Range Dimensions (w/out rubber boot ) Weight Communications ports Connector Styles Accessories Provided ±.05 db/db ~500 Traces Internal and Flash Drive Input VAC, 47-63Hz, 0.4A, Output 13.6V, 0.57A 8 AA NiMH - 8hr Operation -20 to 60 C -10 to 40 C 7.75 L x 4.5 W x 2.25 H (197mm L x 114mm W x 57mm H) 2 lbs USB/PC & USB Flash Drive FC, SC Interchangeable Universal Power Adapter w/us, UK, Continental Europe, and Australian Plugs, Interchangeable FC/ST and SC Adapters, Manual on CD, CertSoft Software Suite, Protective Rubber Boot Specifications are subject to change without notice: s Output Power Laser Safety Classifi cation Modulation Modes Emitter Type Laser Safety Class Connector Type Output Power FTE-7500C-KLMN FTE-7500C-OPQR CI-1100 CW Light Source VFL Ordering Information 1471/1494/1511/1531nm ±3nm or 1551/1571/1591/1611nm ±3nm 0 dbm Class I Safety Per FDA/CDRH and IEC Regulation CW, 270 Hz, 1000 Hz, 2000 Hz Laser 650nm ±5nm Class IIFDA21 CFR & IEC 825-1: mm Universal 1mW Max. 1471/1491/1511/1531 CWDM OTDR 1551/1571/159/1611 CWDM OTDR Video Probe FTE-SCASE-LG Soft Case for FTE-6000, 7500 and 8000 Series Specifications are subject to change without notice: With the optional Video probe, you can use the inspection scope to ensure proper cleanliness of connectors prior to inserting them into the OTDR. View multiple traces with the certifi cations software and associate connector images with traces for test reporting Custom Confi gurations Available

12 FTE-1700 OTDR Small and Rugged The FTE-1700 is small and light weight. It weighs less than 2 lbs., fi ts comfortably in your hand and built in a rugged enclosure surrounded by a protective rubber boot. Construction Mode This feature assist with testing a large number of fi bers with similar settings. By pressing just one button the OTDR will test a fi ber at two wavelengths, save each test and then display both tests for review. Bluetooth Operation Want a larger display, want to geotag your fi les, or your traces, use the Bluetooth feature and operate the OTDR with a compatible Android device. Auto Test The AutoTest feature of the OTDR does a quick test of the fi ber conditions, sets the range and pulse width, then produces a trace of the fi ber under test. This is ideal to use if unfamiliar with OTDR testing or the approximate length of the fi ber is not known. Most Affordable OTDR on the Market Bluetooth Operation W/free Android App IEC Pass/Fail Grading 32 db Dynamic Range Short Dead Zone Integrated Autowave Power Meter Stable Light Source Ultra Fast Trace Acquisition One Button Testing Short Dead Zone Event Table with Pass/Fail Feature Trace Comparison with Trace Overlay Simple Graphical User Interface Training with Onboard Help Screens Telcordia Compatible Software Included Light Weight Rugged Enclosure SM, MM and Quad Units Available Onboard Memory for 500 traces Bright Easy To Read Color Display Trace Analysis The trace analysis system gives the user the ability to determine quickly if the fi ber meets measurement criteria with its Pass/Fail capabilities. Integrated Video Scope Use the video scope with our optional VIS-300 video probe to check and grade (pass/fail) your connectors according to IEC File Storage Onboard fi le storage for up to 500 traces and fi les may be downloaded to a computer through the USB/PC port. Trace Analysis and Reporting Project reporting and documentation is fast and easy with a Pass/ Fail feature, onboard event table and the supplied report generating software with multi-trace capability. Integrated Loss Test Set The FTE7000 has an integrated Loss Test Set. When used with compatible equipment from TTI s 1500 series or other TTI OTDRs with loss test sets, the auto wavelength and auto test capabilities will speed testing and help eliminate user error.

13 Company Name: FIS Customer: CityHall Test Date: 2/09/09 Operator: Joe Model Number: OVX1315LTS Serial Number: 1509 Cable ID: 1-39 Fiber ID: 12 Fiber Type: SMF28E Cable Type: LT Location From: City Hall Location To: Fire House Event # P/F Distance Splice 2 Point db/km Event Type 1 Fail Km 0.68 db db db 45.7 db 2 Pass Km 1.16 db db db Splice 3 Pass Km 1.09 db db db 57.9 db 4 Pass Km 1.08 db db db 66.7 db 5 Fail Km db db db 63.7 db End? Pass Km N/A 4.75 db db Link Printed: 4/7/ of 1 FTE-1700 Specifications Dynamic Range Pulse Width Units of Measurement Event Dead zone Attenuation Dead Zone OTDR 850, 1300, 1310,1550, ±20nm 26/27dB MM, 32/30dB SM (7000E - 30dB) 20-10,000 ns km, kf, mi 2m 5m.25-64m Distance Uncertainty ±(0.75m % x distance + sampling resolution) Full Scale Distance Range 1-64km MM, 1-240km SM Typical Real-time Refresh Rate 4 Hz Group Index of Refraction (GIR) Linearity ±.05 db/db Memory Capacity 1000 Traces Memory Type Internal Power Supply / Charger Battery Storage Temperature Operating Temperature Range Input VAC, 50-60Hz, 0.3A, Output 9V, 0.67A 4hr -20 to 60 C -10 to 50 C Emitter Type Laser Safety Class Connector Type Output Power Detector Type Connector Type Measurement Range Calibrated s Units of Measurement Power Measurement Uncertainty Power input Range Autotest Range VFL Power Meter Laser 650nm ±5nm Class IIFDA21 CFR & IEC 825-1: mm Universal 1mW Max. InGaAs 2.5mm Interchangeable +5 to -77dB (CATV +25 to -57dB) 850,1300,1310,1490,1550,1625nm dbm, db.01 db ± 0.18 db under reference conditions, ± 0.25 db from 0 to -65 dbm, ± 0.35 db from 0 to +5 dbm and from -65 to -77 dbm +5 to -77dBm 0 to -40dB Dimensions (with rubber boot ) Weight Communications ports Connector Styles Accessories Provided 8.62 L x 4.25 W x H (219mm L x 108mm W x 60mm H) 1.6 lbs. USB/PC FC, ST, SC Interchangeable Universal Power Adapter w/us, UK, CE, and AU Plugs, Interchangeable FC/ST and SC Adapters, Certsoft Software Suite, Protective Rubber Boot, USB Cable, Manual on CD TTI reserves the right to change specifications without notice. s Output Power Laser Safety Classification Modulation Modes CW Light Source 850, 1300, 1310, 1550, 1625 nm ±20nm 0 dbm 1625nm) Class I Safety Per FDA/CDRH and IEC Regulation CW, 270 Hz, 1000 Hz, 2000 Hz TTI reserves the right to change specifications without notice. Ordering Information FTE Dual MM 850/1300nm OTDR with Video Scope and probe, LTS and VFL FTE SM 1310nm OTDR with Video Scope and probe, LTS and VFL FTE FTE-1700-QUAD FTE-1700E-1310 VIS-300 Dual SM 1310/1550nm OTDR with Video Scope and probe, LTS and VFL MM/SM 850/1300/1310/1550nm OTDR with Video Scope and probe and LTS 30 db Economy SM OTDR 1310nm (No Video Probe, LTS or VFL) TTI Video Inspection Probe View multiple traces with the certifi cation software and associate loss test results and connector images with traces for test reporting Use the interactive event table with event map to evaluate traces File management screen with fi le data and representation of highlighted trace

14 FTE-8100 Optical Spectrum Analyzer 88 Channel C or L Band The FTE-8100 Handheld OSA tests 88 channels on the on the ITU Grid for DWDM testing at 50 or 100 GHz channel spacing. Onboard Help System Use the onboard help text for a quick guide to the functions and features available on the FTE8100. Auto Test button With its one button Auto Test feature, full set of selectable scale limits and thresholds, the FTE-8100 makes zeroing in on channel measurements easy. Storable Test Configurations Save test confi gurations to memory for later use. Power/Gain Tilt The Hand Held FTE-8100 offers high end features such as power tilt for DWDM channel equalization and gain tilt to adjust EDFA gain fl atness. 88 Channel DWDM Testing 4 Color Touch Screen Selectable First Channel Setting 50 or 100 GHz Channel Spacing Available in C Band Pass/Fail Thresholds and Drift Stats Fast <1/2 Second Update Bar Graph and Table Modes Auto Test Zooms in on Active Channels Interchangeable Fiber Optic Connectors Storable Parameter Settings Solid State Optics-No Moving Parts Easy Operation with Help Mode 6 hr Battery Life Impact Resistant Boot USB/PC Ports Information Display For fl exibility the channel numbers are selected in wavelength or frequency and the information is displayed in graph or table mode Onboard File Storage There is fi le storage for up to 1000 tests that may be downloaded to a PC and viewed with supplied CertSoft reporting software. Pass/Fail Thresholds User selectable Pass/Fail thresholds are indicated on the main graphical display by a highlighted background with failed channels falling outside the highlighted area. In the table view, failed measurements are easily identifi ed by being shown in red. Integrated Video Inspection Ensure accurate test and protect equipment from damage, by inspecting connectors with the integrated video inspection system. Connector images may be stored, allowing users to include them with test documents.

15 FTE-8100 Specification Specifi cations Range Channel Spacing Accuracy Channel Power Range C-Band nm (196.0 THz THz) 50GHz, 100GHz ±0.1nm +10dBm to -50dBm Absolute Accuracy Max Composite Power PDL Optical Rejection Ratio Measurement Time Readout Return Loss Optical Interface Graphical Display Display General ±1 db +28 dbm ±0.15dB 40dBc (@50GHz) < 1/2 Second 0.01dB >40dB Universal UPC (FC/SC) Bar Graph and Table View 4 in Touch Color TFT Dimensions with Protective Boot 8.62 L x 4.25 W x H (219mm L x 108mm W x 60mm H) Weight Battery 1.8 lbs Rechargeable NiMH - 6 hours operating time prel elim imina inar ary Power Input VAC, 50-60Hz, 0.3A, Output 9V, 0.67A Environmental Operation -10 C to 50 C Accessories Included Universal power supply with mains for US, UK, CE and AU. Interchangeable FC and SC adapters, CertSoft software suite and manual on CD, USB cable and rubber boot Specifications are subject to change without notice: We also offer the FTE8100-CWDM-9 CWDM Channel Analyzer FTE-8100C VIS-300 Ordering Information C-Band Optical Spectrum Analyzer TTI Video Probe Main Scan Screen

16 FTE-8000 Optical Spectrum Analyzer 82 Channel C or L Band The FTE-8000 Handheld OSA tests 82 channels on the on the ITU Grid for DWDM testing at 50 or 100 GHz channel spacing. Onboard help system Use the onboard help text for a quick guide to the functions and features available on the FTE8000. Auto Test button With its one button Auto Test feature, and a full set of selectable scale limits and thresholds, the FTE-8000 makes zeroing in on channel measurements easy. Simple to Use The FTE-8000 is designed for simple operation and is suited for fi eld or lab use. Power/Gain Tilt The Hand Held FTE-8000 offers high end features such as power tilt for DWDM channel equalization and gain tilt to adjust EDFA gain fl atness. 82 Channel DWDM Testing 50 or 100 GHz Channel Spacing Available in C, L Bands Pass/Fail Thresholds and Drift Stats Fast <1/2 second Update Integrated Video Inspection System Bar Graph and Table Modes Auto Test Zooms in on Active Channels Interchangeable Fiber Optic Connectors Rugged Water Resistant Case Solid State Optics-No Moving Parts Easy Operation with Help Mode 4 Color Display 8hr Battery Life Impact Resistant Boot USB/PC and USB Flash ports Information Display For fl exibility the channel numbers may be displayed in wavelength or frequency in graph or table mode Onboard File Storage There is fi le storage for up to 1000 tests that may be downloaded via USB/PC or USB fl ash ports and view with supplied CertSoft reporting software. Pass/Fail Thresholds User selectable Pass/Fail thresholds are indicated on the main graphical display by a highlighted background with failed channels falling outside the highlighted area. In the table view, failed measurements are easily identifi ed by being shown in red. Integrated Video Inspection Ensure accurate test and protect equipment from damage, by inspecting connectors with the integrated video inspection system. Connector images may be stored, allowing users to include them with test documents.

17 FTE-8000 Specifications Specifi cations Table View Range Channel Spacing Accuracy Channel Power Range Absolute Accuracy Max Composite Power PDL Optical Rejection Ratio Measurement Time Readout Return Loss Optical Interface Graphical Display Display Dimensions W/O Boot Weight with Boot Battery C-Band nm (196.0 THz THz) L-Band nm (190.5 THz THz) 50GHz, 100GHz ±0.1nm +10dBm to -50dBm ±1 db +28 dbm ±0.15dB 40dB (@50GHz) < 1/2 Second 0.01dB >40dB Universal UPC (FC/SC) Bar Graph and Table View 4 in Color TFT 7.75 x 4.5 x 2.25 inches 2 lbs Rechargeable NiMH - 8 hours operating time The table view of the FTE-8000 displays failed channels in red and when a channel is highlighted, statistical information is displayed including the minimum, maximum and average power levels. Graphical View Power Input VAC, 47-63Hz, 0.4A, Output 13.6V, 0.57A Environmental Operation -10 C to 50 C Accessories Included Universal power supply with mains for US, UK, CE and AU. Interchangeable FC and SC adapters, CertSoft Reporting Software, USB cable, manual and protective rubber boot The FTE-8000 graph view can be confi gured to optimize the test view. The user can zoom in on specifi c channels, mark the display area in which channels meet power criteria and limit the number of channels viewed. Specifications are subject to change without notice: Video Scope FTE-8000C FTE-8000L FTE-SCASE-LG CI-1100 Ordering Information C-Band Optical Spectrum Analyzer L-Band Optical Spectrum Analyzer Soft Case for FTE-6000, 7500 and 8000 Series Video Probe The FTE-8000 will accommodate the TTI CI video probe allowing the user to visually check connectors for cleanliness and damage prior to testing. This helps eliminate costly repairs to the FTE-8000 and results in more accurate tests.

18 FTE-8000-CWDM Channel Analyzer Fast Scan The FTE-8000-CWDM Channel Analyzer Displays a full scan of all 18 channels on the ITU grid twice a second. Onboard Help System Use the onboard help text for a quick guide to the functions and features available on the FTE8000-CWDM. Auto Test Button With its one button Auto Test feature, and a full set of selectable scale limits and thresholds, the FTE-8000-CWDM makes zeroing in on channel measurements easy. Simple to Use The FTE8000-CWDM is designed for simple operation and is suited for fi eld or lab use. Power Tilt The FTE-8000CWDM offers a Power Tilt feature for CWDM channel equalization. Available in 18 or 9 Channel Models Pass/Fail Thresholds and Drift Stats Fast <1/2 second Update Onboard Video Scope Bar Graph and Table Displays Auto Test Zooms in on Active Channels Interchangeable Fiber Optic Connectors Rugged Case w/impact Resistant Boot Solid State Optics-No Moving Parts Easy Operation with Help Mode 4 Color Display 8hr Battery Life Stores 1000 test USB/PC and USB Flash ports Information Display For fl exibility the channel numbers are selected in wavelength or frequency and the information is displayed in graph or table mode Onboard and External File Storage There is fi le storage for up to 1000 scans that may be downloaded to a fl ash drive or directly to the PC using the supplied CertSoft software suite. Pass/Fail Thresholds The unit allows users to set Pass/Fail thresholds that are displayed on the main graphical display by a highlighted background. Failed channels fall outside the highlighted area and in the table view failed channels are displayed in red. Integrated Video Inspection Ensure accurate test and protect equipment from damage, by inspecting connectors with the integrated video inspection system. Connector images may be stored, allowing users to include them with test documents.

19 Range Channel Spacing Channel Pass Band Channel Power Range Absolute Accuracy FTE-8000-CWDM Specifications Table View Specifi cations nm 20nm ±6.5nm +5dBm to -50dBm ±1 db Max Composite Power PDL Adjacent Channel Isolation Measurement Time Readout Return Loss Optical Interface Graphical Display Display Dimensions W/O Boot Weight Battery +23dBm ±0.2dB 30dB < 1/2 Second 0.01dB >40dB Universal UPC (FC/SC) Bar Graph and Table View 4 in Color TFT 7.75 x 4.5 x 2.25 inches 2 lbs Rechargeable NiMH - 8 hours operating time In the table view, the FTE-8000-CWDM displays failed channels in red and when a channel is highlighted, statistical information is displayed including the minimum, maximum and average power levels. Graphical View Power Input VAC, 47-63Hz, 0.4A, Output 13.6V, 0.57A Environmental Operation -10 C to 50 C Accessories Included Universal power supply with mains for US, UK, CE and AU. Interchangeable FC and SC adapters, CertSoft Reporting software, USB cable, manual on CD and rubber boot The FTE-8000-CWDM graph display can be confi gured to optimize the test view. The user can zoom in on specifi c channels, mark the display area in which channels meet power criteria and even limit the number of overall channels viewed. Specifications are subject to change without notice: We also offer the FTE8000-C or - L DWDM handheld optical spectrum Analyzer for DWDM network testing applications Video Scope FTE-8000CWDM FTE-SCASE-LG CI-1100 Ordering Information 18 Channel CWDM Analyzer Soft Case for FTE-6000, 7500 and 8000 Series Video Probe The FTE-8000-CWDM will accommodate the CI-1100 video probe allowing the user to visually check connectors for cleanliness and damage prior to testing. This helps eliminate costly repairs to the fi ber optic connects on the FTE CWDM and results in more accurate tests.

20 FTE-6000 Tunable Laser Source Hand Held Tuneable Laser Source The TLS is available in C and L Bands with up to 88 channels on the ITU Grid at channel Spacing down to 50 GHz. Onboard help system Use the onboard help text for a quick guide to the functions and features available on the FTE-6000 TLS Display The TLS displays output power and wavelength, frequency or ITU channel on a bright 4 color display. Selectable Step Size Down to 50 GHz Selectable Start & Stop Channels Displays in or Frequency Selectable Dwell Time Available in C or L Band Rugged Case with Impact Resistant Boot USB PC Interface with Remote Operation Battery Operated or International Line Voltage Simple Operation with onboard Help Mode Lowest Cost Hand Held Tunable Laser Source Interchangeable Fiber Optic Connectors Up to 88 Channels on the ITU Grid Fast Turn-On 4 Color Display 4 hr. Battery Life Simple to Use It is designed for simple operation and is suited for fi eld or lab use. The user has he ability to set your step size, power level, dwell time and whether the sweep is to move up or down the scale. Start-UP The FTE-6000 offers a fast start up with minimal warm up and provides stable wavelength and power outputs. Virtual Instrument The supplied CertSoft software suit virtual instrument feature may be used to operate the unit via PC. Rugged The FTE-6000 is manufactured in our rugged splash proof housing with a highly protective boot.

21 FTE-6000 Specifications Frequency Range Accuracy Line Width Side Mode Suppression Ration Output Power Range Power Setting Power Variation over Range Minimum Channel Spacing Fiber Type Relative Intensity Noise Graphical Display Dimensions Weight Battery FTE-6000 C THz ( nm) FTE-6000 L THz ( nm) 1.5 GHz 1 MHz 45 db +8 dbm to +14 dbm C Band +5 dbm to +11 dbm C Band 0.01 db +0.4 Max Typ. 50 GHz (0.4nm) 9/125 μm -100 db/hz 10MHz - 1 GHz -140 db/hz 1 GHz 10 GHz 4 in Color TFT 7.75 x 4.5 x 2.25 inches 2 lbs Rechargeable NiMH - 4 hours operating time Power Input VAC, 47-63Hz, 0.4A, Output 13.6V, 0.57A Environmental Operation -10 C to + 40 C Accessories Included Universal power supply with mains for US, UK, CE and AU. Interchangeable FC and SC adaptors, CertSoft VI Software, USB Cable, Manual on CD and Rubber Boot Specifications are subject to change without notice: The FTE-6000 Tuneable Light Source, can conducted sweeps of the ITU grid. Optimize the test procedures by setting the beginning and ending wavelengths, step size, power level, dwell time and direction of the sweep. FTE-6000C FTE-6000L CI-1100 FTE-SCASE-LG Ordering Information C-Band Tuneable Laser Source L-Band Tuneable Laser Source Video Scope Inspection Probe Soft Case for FTE-6000, 7500 and 8000 Series

22 1500 Series Loss Test Set Flexible Configuration The 1500 is available as a Loss Test Set or as a stand alone Power Meter and Light Source in dual and triple wave confi gurations InGaAs Power Meter InGaAs based optical power meter calibrated at six wavelengths with a +5 to -77 dbm measurement range. Auto Test In the Autotest mode, the master unit (light source) changes wavelengths at a fi xed rate and informs the slave unit (power meter) of the wavelength being transmitted. Automated loss measurements Auto wavelength switching Up to three s in one source Interchangeable Power Meter adapters Interchangeable Light Source adapters Power Meter with 80+ db Dynamic Range Single port laser source Storage for 2000 Multi Wave Tests Rechargeable Li polymer 9V battery USB interface Free CertSoft Reporting Software Suite Auto Recognition The power meter recognizes the wavelength being tested to help eliminate costly errors. Available s The stabilized laser light source may have up to three wavelengths and the power meter is calibrated at 850, 1300, 1310, 1490 and 1550nm and 1625nm. Small Size and Rugged The 1500 Series is built into a very small package that is rugged and lightweight. Fiber Identification The units also performs fi ber identifi cation functions with modulation frequencies of 270, 1000 and 2000 Hz. Power Options Power by a rechargeable lithium polymer battery or in a pinch, any common 9V alkaline battery. Test Storage Store up to 2000 three wavelength tests and downloads the information to your PC via USB with the supplied CertSoft software suite Available as Loss Test Sets or as Power Meter and Light Source Kits

23 1500 Series Specifications Power Meter Power Meter Detector Type InGaAs Measurement Range Calibrated s Units of Measurement Power Measurement Uncertainty Auto Test Range +5 dbm to - 77 dbm (CATV +25 dbm to -57dBm) 850, 1300, 1310, 1490, 1550, 1625 nm dbm, db, 0.01dB ± 0.18 db under reference conditions, ± 0.25 db from 0 to -65 dbm, ± 0.35 db from 0 to +5 dbm and from -65 to -77 dbm 0 to -40 db Storage Locations 2000 Light Source Laser Output Power 0 dbm, 1mw Output Stability Laser s Modulation Modes Laser Safety Classification Display Battery/Operating Time Power Supply / Charger Power Requirements Operating Temp. Range Storage Temp. Range ±.05 db / 24 constant temp,, ±.02 db/c temperature coeffi cient 850nm, 1300nm, 1310 nm, 1490, 1550 (± 20 nm) CW, 270 Hz, 1000 Hz, 2000 Hz Class I safety per FDA/CDRH and IEC regulation General LCD, power reading, 0.4 high digits,.01 db resolution Power meter, laser wavelength display 0.16 high digits Rechargeable Li Polymer/approximately fi fteen hours following a full charge (power meter only approx. twenty hours) Universal, US, UK, Continental Europe, and Australian Plugs Included VAC, Hz, 3 VA Max -10 to 40 C Equipment -10 to 60C - Battery-10 to 40 C Dimensions (with boot ) 5.9 L x 3.9 W x 1.37 H (150mm L x 100mm W x 35mm H) Weight Accessories Provided 0.52 Kg FC, ST, SC adaptors for both PM and LS, rubber boot, battery, power supply/charger, manual and software on CD, USB cable TTI reserves the right to change specifications without notice Ordering Information PM-1500 Auto Wave Power Meter 5 dbm to - 77 dbm PM-1500C CATV Auto Wave Power Meter +25 dbm to -57dBm Loss Test Set Light Source LTS Loss Test Set with 850/1300nm Light Source LS /1300nm Multi-Mode Light Source LTS Loss Test Set with 1310/1550nm Light Source LS /1550nm Singlemode Light Source LTS Loss Test Set with 1310/1490/1550nm LS LS /1490/1550nm Singlemode LS For Loss Test Set, add a C for CATV Power Meter. Ex: LTS-1500C-35

24 FTE-4000 Variable Optical Attenuator SPECIFICATIONS Attenuation Range s Uncertainty Repeatability Insertion Loss Return Loss Max Input Power FTE to 40dB FTE to 80dB 1310 and 1550 nm.01 db +/- 0.5 db +/- 0.1 db <2 db (<4dB FTE ) 50 db 27 dbm TTI Hand Held Variable Optical Attenuator The FTE-4000 is available with 40 db or 80 db attenuation levels. Onboard Help System As with all of our advanced test equipment the VOA has an onboard help feature. Applications The FTE-4000 can assist in the testing of system budget compliance, balancing transmitter power and adjusting receiver attenuation settings. Built-In Output Power Monitor The built-in output power monitor assists in setting appropriate attenuations levels. Sweep Mode The sweep mode can produce attenuation levels across a selected range. Rugged The FTE-4000 is manufactured in our rugged splash proof housing with a highly protective boot. Graphical Display Dimensions w/boot Weight Battery Up to 80 db Attenuation Built in Output Power Monitor Typical Insertion Loss <2dB Adjustable Step Sizes USB PC Interface w/remote Operation Absolute/Relative Attenuation Settings Calibrated at 1310/1550 Rugged Case with Protective Rubber Boot Lowest Cost Hand Held VOA 4 Color Display 4 in Color TFT 8.62 L x 4.25 W x H (219mm L x 108mm W x 60mm H) 1.6 lbs Rechargeable NiMH - 6 hours operating time Power universal US, GB, EU, AU Mains Environmental Operation -10 C to + 40 C Accessories Included Universal power supply. FC and SC adaptors, Windows TM Compatible Software, USB Cable and Manual Specification are Subject to Change Without Notice

25 VFL-280 Visual Fault Locator Universal 2.5 mm Adapter Modulated Mode Standard AA Batteries >100 Hour Battery Life MM and SM Applications Compact Size TTI VFL-280 Visual Fault Locator This is an easy to use piece of equipment that allows the precise location of breaks or severe micro bends in a fi ber or cable under test by visually checking fi ber for leaks of visible light. Specifi cations Output Power 1mW max 650 nm +/- 5nm Pulse Rate 6 Hz Emission Indicator LED Standard F/O Connector Universal 2.5 mm Duty Cycle 50% Find Poor Splices Use the VFL to fi nd leaky splices or connectors within a patch panel or breaks within the dead zone of an OTDR Small Size Just a little wider and taller than a credit card, weighing just over 4 ounces. Battery powered Over 100 hours of operation on 2 AA alkaline batteries Battery Battery Life Size Weight Operating Temperature Storage Temperature Auto Shut-Off 2 (AA) Alkaline >100 hrs. 4.0 L x 2.5 W x 1.1 D 4.2 oz. -10 to 50 C 30 to 60 C 30 Min. Specification are Subject to Change Without Notice Universal Adapter Shipped with a universal 2.5mm adapter Fiber Identification Use the VFL to identify fi bers in multi-fi ber cables suitable for both singlemode and multimode fi bers Power Save feature The VFL-280 has an over ridable power saver feature that powers down the unit after 30 minutes.

26 FTE-5100 Fiber Optic Video Scope Interchangeable Adapters Digital Zoom USB Port for Connection to PC 4 Hour Battery Life IEC Pass/Fail Grading System 150X and 300X Representation Position Image for Best Viewing Stores Connector Images Use with TTI CertSoft Software Suite Protective Rubber Boot with Stand Shipped with Universal AC Adapter Wide Range of Adapters Available One Hand Operation 4 TFT Display VIS-300 Probe is Compatible with the FTE1700 and FTE7000A Display Magnifi cation Power Battery Type Operating Temp Dimensions w/boot Specifi cations 4 in Color TFT 150X and 300X approx. Input VAC, 50-60Hz, 0.3A, Output 9V, 0.67A Rechargeable NiMH 4 Hours Operating time -10 C to +40 C 8.62 L x 4.25 W x H The FTE5100 has a Pass/Fail grading system with images that can be stored and recalled. Stored images may be associated with OTDR trace files to produce complete professional reports that include the OTDR trace, along with connector image and LTS results. The FTE5100 is indispensable for testing connectors end face prior to connecting to expensive optical test equipment. This helps ensure accurate measurements and also helps protect equipment from damage caused by contaminated connectors. It is also essential to have clean connectors to ensure networks operate at properly. The VIS- 300 probe may be purchased separately and used with other FTE series equipment. The VIS-300 has a full range of tips available. FTE-5100 VIS-300 Specification are Subject to Change Without Notice Ordering Information Video Inspection System Video Probe Kit Contents The FTE-5100 Kit includes Probe, LCD Scope Unit, AC wall adapter, 2.5mm patch cord tip, USB Cable, soft Case, Manual on CD and PC Software

27 Terahertz Technologies Inc. 169 Clear Rd, Oriskany NY Toll Free: 888-U.S.-OTDRS Phone: Fax: TTI makes every effort to insure all statements and information for the products referred to in this document are accurate and reliable. TTI can not accept any responsibility for errors, omissions or miss statements, nor can they accept responsibility for any actions taken based on the information demonstrated herein. TTI reserves the right to make changes of any kind to the product referred to in this document without prior notice. 2/2014 Terahertz Technologies Inc.