Smart Wireless Devices LAN-WMBUS-M. Wireless MBUS, door and window sensor. With optional glass break accessory.

Size: px

Start display at page:

Download "Smart Wireless Devices LAN-WMBUS-M. Wireless MBUS, door and window sensor. With optional glass break accessory."

Daniela Welch
5 years ago
Views:

1 Smart Wireless Devices LAN-WMBUS-M Wireless MBUS, door and window sensor. With optional glass break accessory. The LAN-WMBUS-MI/A (G)/(E)- is a activity sensor for detecting for example openings/closing of windows, doors etc. It can also be used for counting the number of openings in a certain timeframe. The sensor can be ordered in different configurations see the product matrix for more details. The devices have the following features. Wireless MBUS EN /4:2013 Standard. S, T and C- mode are supported. Superb antenna design and high output power for long range. Onboard Magnet sensor. Possibility to connect external wired magnet detector (E) Possibility to connect external wired glass break detector (G) Values can be send instantaneous (I) or accumulated (A). Sabotage detection if sensor is opened or removed from wall. AES 128 encryption. CBC Mode 5 OMS compliant. Very long battery lifetime, up to 10 years. Depending on how many openings. Wide operating temperature range - 20 to +55 degree C. (other temperatures upon request) Plug & Play. Works right out the box, no complex installation needed. Low battery alarm. Available with optional high quality battery.

2 Product description The device is made up of a sensor and a magnet. Whenever the magnet is removed or returned to the sensor a message is sent (I-variant). The number of passages can also be accumulated and the total number of passages is transmitted in even intervals (A- Accumulated). Is also possible to further enhance the device by connect an external magnet detector through cabling (E-variant) or connect it to Lansen Glass Break device (G). Product Matrix Article Number External External inputs interface LAN-WMBUS-M - - LAN-WMBUS-ME Magnet 1 LAN-WMBUS-MG GlassBreak 1

3 Radio characteristics Frequency Chiprate S-Mode MHz T-Mode Mhz C-Mode Mhz S-Mode kcps T-Mode 100 kcps C-Mode 100 kcps Datarate S-Mode Chiprate /2 T-Mode Chiprate x 2/3 C-Mode Chiprate RF output power Antenna Transmission intervals accumulated values Retransmission Collision avoidance 12dBm Integrated 15 minutes (other intervals are also available). 2 times. Listen Before Talk (LBT) and random back off time. Only available upon request. Power and battery Power consumption Battery type Max 40 ma, SAFT LS V - AA Primary Li-SOCL2 (recommended) Max operating voltage 3.6V Minimum operating voltage 2.8V Lifetime Typical more than 10 years. W-MBUS Info Header type EN APPLAYER LONG TRANSPORT HEADER (0X72) Encryption AES 128 CBC (mode 5) Sensor type Low battery warning Manufacture code 0x1B Room sensor device (standard other setting if requested) Yes LAS (standard, other code if requested)

4 -A variant Accumulated value. Example: DATA_FIELD_BCD_12_DIGIT; H.C.A Number of openings detected 12 BCD digits, instantiations accumulated value from the power up of the device Data is sent using H.C.A. That is unconverted data value. 0x0E 0x6E 0x01,0x23,0x45,0x67,0x89,0x12 -I variant Alarm message is sent using Error Flag message as soon as the alarm status is changed.. 0x02; (DIF field 2 byte integer) 0xFD; (VIF Extension table) 0x17; (VIFE Error flags binary manufacture specific 16bits) Alarm detected (Bit2) Alarm restored (Bit 2) Sabotage Detected Message. The sabotage message is always sent in two ways: Sabotage using Error Flag message. The message is only sent when the status of sabotage is changed. Sabotage using the manufacture specific status-byte in EN APPLAYER LONG TRANSPORT HEADER (0X72). The bit is set to 1 as long as sabotage is detected. 0x02; (DIF field 2 byte integer) 0xFD; (VIF Extension table) 0x17; (VIFE Error flags binary manufacture specific 16 bits) Sabotage detected.. 10 (Bit 1) Sabotage restored.. 00 (Bit 1) Sabotage detected 1 (Bit 5) Sabotage restored 0 (Bit 5) Low battery Low battery is sent using the power low bit in the status-byte in EN APPLAYER LONG TRANSPORT HEADER (0X72) EN :2013 Table 7 Coding of the status field Battery low 1 (Bit 2) Battery OK 0 (Bit 2)

5 Operating conditions Storage temperature Operating temperature, Relative moisture - 55 to + 85 gr C -20 to + 55 gr C (other temperature upon request) Less than 95% non-condensing Casing Colour Dimensions Material White 25,5 x 88,5 x 32 mm ABS Conformity EMC EN Safety EN Radio EN Features for easier installation. Red LED indication when inputpulse is detected Red LED indication when sabotage is detected Red LED indication when sabotage is restored When: During 4 minutes from the point a battery was inserted into the device. What: The LED lights up whenever the magnet is removed from sensor and is turned off when the magnet is placed by the sensor. Why: In order to verify that the device is correctly mounted and is working correctly and that the installation was successful. When: When the device is opened or removed from the wall. (sabotage is detected) What: The LED flashes for 4 seconds at 4 Hz. Why: In order to verify that the sabotage detection is working. When: When the device is closed or placed against the wall again(sabotage is restored) What: The LED flashes for 2 seconds at 1 Hz. Why: In order to verify that the sabotage is restored and the device is closed and mounted correctly. Changed the time and frequency for the LED. During the first 4 minutes the synchronized message is sent every 30 seconds after that every 15 minute.

Wireless Smart Metering LAN-WMBUS-M. Wireless MBUS, door and window sensor. With optional glass break accessory.

Wireless Smart Metering LAN-WMBUS-M Wireless MBUS, door and window sensor. With optional glass break accessory. The LAN-WMBUS-M (I/A) (G)/(E)- is a activity sensor for detecting for example openings/closing