Automatisk Branddetekterings- og Alarm-system Automatic Fire Detection and Alarm System

Transcription

1 Schneider Electric Danmark Lautrupvang Ballerup Certifikat nr. no har på baggrund af vurderede systemegenskaber baseret på systemprøvningsrapport(er) for overensstemmelse mellem systembeskrivelse og gældende specifikationer i systemstandarder og/eller andre normative dokumenter opnået dette overensstemmelsescertifikat for systemet has achieved this certificate of conformity based on evaluation of system approval test report(s) for conformity between system standards and(or) other normative documents for the system FX-101 Automatisk Branddetekterings- og Alarm-system Automatic Fire Detection and Alarm System til anvendelse i automatiske brandalarmanlæg. to be used in automatic fire detection and alarm systems. Certifikatet tilkendegiver overensstemmelse med kravene i følgende standarder og andre normative dokumenter: The certificate signifies compliance with the requirements in the following standards and other normative documents: EN 54-13: 2005 Fire detection and fire alarm systems Part 13: Compatibility assessment of system components. DBI Guideline 003 Fire safety systems Certifikatet er kun gældende så længe systemet er i overensstemmelse med ovennævnte samt kravene i certificeringsordningen. The certificate is only valid as long as the system is in conformity with the above mentioned and the requirements of the certification scheme. Udstedt / Issued: Udløber/expire: Erstatter tidligere udstedt certifikat Replace previous issued certificate Merete Poulsen Dan Bluhme Tlf.: Page 1 of 10

2 Bilag/Annex: 1 Control and indicating equipment FX101/A + FX101/S Power supply FX101/A + FX101/S 0402-CPR-SCO CPR-SCO Addressable beam detector 50 m, APO Addressable beam detector 100 m, APO Base/IO sounder beacon base with isolator, APO Device type EDI-20, Intellia optical smoke detector Device type Open area sounder beacon with red lens, APO Base/IO XP95 sounder beacon base with isolator, APO Device type EPP-22A, Waterproof MCP with isolator ( ) Base/IO Sounder beacon case with isolator, APO Device type CO Heat Multisensor APO (not approved for CO detection) Base/IO EBI-11, Isolator base ( ) Base/IO XP95 beacon base with isolator, APO Base/IO EBI-20, Relay base Base/IO DIN-rail Mains Input/Output Unit, APO Base/IO EMI-400, DIN-Rail Dual Isolator Base/IO EMI-410, DIN-Rail Single Input Module 0786-CPD CPD CPR-f CPR-f CPR-F CPR-f CPR CPD CPD CPD cpr-f cpd CPD CPD CPD-0857 Tlf.: Page 2 of 10

3 Bilag/Annex: 1 (continued) Base/IO EMI-410/CZ, Conventional zone module Base/IO EMI-411 DIN Rail Single Input Single Output Module Base/IO EMI-401 DIN-Rail Single Output Module Base/IO Apollo Sounder Controller (5 Amperes), APO Device type EDI-30, Intellia Multisensor Smoke Detector Device type EDI-50, Intellia Heat Detector Base I/O ESI-10, Ancillary Base Sounder Base /IO Beacon Base with Isolator, APO Base /IO Intellia ESI-60, Sounder Beacon Base with Isolator ( APO) Base /IO Intellia ESI-30, Integrated Base Sounder ( APO) Base /IO Intellia, Discovery Sounder VAD Base (White) with Isolator, APO Base /IO Intellia ESI-20, Integrated Base Sounder with Isolator Device type Single Channel Protocol Translator XP95 IS, APO Device type Galvanic Isolator, APO Device type XP95 Intinsically Safe Optical SmokeDetector, APO Device type XP95 Intinsically Safe Heat Detector, APO Base /IO XP 95 Mounting Base IS, APO Device type XP95 Manual Call Point IS, APO 0832-CPD CPD CPD CPD CPR-F CPD CPD CPD CPD CPD cpr-f CPR-F CPD-0858 Passive component for EX protection CPR-F CPD-0311 Passive component CPD-0812 Tlf.: Page 3 of 10

4 Bilag/Annex: 1 (continued) Device type ESI-50 Red Open-Area Sounder 100dB Device type Multitone open area sounder (Red), APO Device type ESMI Manual Call Point ECF22116 Device type Intellia EPP-20 Manual Call Point with Isolator ( APO) Device type ESI-40 Multitone open area sounder (Red), APO Base/IO EMI-311, Input/Output Unit with Isolator Surface mounted Base/IO EMI-310+, Single Input+ Module with Isolator Base/IO EMI-311/240, Single input -Mains Switching Module 0832-CPD CPD CPR-F CPD CPD CPD CPD CPD-0860 Base/IO EMI-310, Single Input Module with Isolator Surface mounted 0832-CPD-0867 Base/IO EMI-301, Single Output Module with Isolator Surface mounted Base/IO EMI-333, Module 3 channel Input/Output Unit Miniswitch monitor, APO Base/IO EMI-301/S, Sounder Control Module with Isolator Surface mounted Base/IO EMI-310/CZ, Conventional Zone Module with Isolator Surface mounted Device type Manual Call Point with Isolator, EPP-22A Device type XPANDER Diversity Loop interface XPA-IN APO Including Internal Aerials Device type Dual IR Flame Detector, APO Device type Loop Powered VAD 15m (Red), APO 0832-CPD CPD CPD CPD CPD CPD CPR CPR-f CPR-F0606 Tlf.: Page 4 of 10

5 Bilag/Annex: 1 (continued) Base/IO EBI-12, Mounting Base Deep ( APO) Device type Loop Powered VAD 8.5m (Red), APO Device type Intelligent Base Mounted UV Flame Detector, APO Device type Intelligent Base Mounted UV/IR2 Flame Detector, APO Device type Intelligent Base Mounted IR3 Flame Detector, APO Device type Loop Powered VAD 7m (Red), APO Base/IO EBI-15, Intellia Heater Base Base/IO Intellia EBI-50 Duct detector housing Device type wireless Combined Sounder-Visual Indicator (Red) and Detector Base, XPANDER, Part No. XPA-WB APO with mounted detector XPANDER Optical Smoke Detector, Part No. XPA-op APO. The component is also identified as 14020APO/ Sales Code XPA- CB APO by the client. Device type wireless Combined Sounder-Visual Indicator (Red) and Detector Base, XPANDER, Part No. XPA-WB APO with mounted detector XPANDER Class A 1R Detector, Part No. XPA-HT APO. The component is also identified as 14021APO/ Sales Code XPA-CB APO by the client. Device type wireless Sounder Base (Red), XPANDER Part No. XPA-SB APO with Sounder Part No. XPA-SO APO. The component is also identified as 14001APO/ Sales Code XPA-CB APO by the client (not testet as wireless component). Device type wireless Combined Sounder-Visual Indicator (Red) and Detector Base, XPANDER, Part No. XPA-WB APO with mounted detector XPANDER Class CS Heat Detector, Part No. XPA-HT APO. The component is also identified as 14022APO/ Sales Code XPA-CB APO by the client. Passive component CPR-F CPR-f CPR-f CPR-f CPR-F0607 Passive component. Passive component CPD CPD CPD CPD-0125 Tlf.: Page 5 of 10

6 Bilag/Annex: 1 (continued) Device type wireless Combined Sounder and Detector Base, XPANDER, Part No. XPA-WB APO with mounted detector XPANDER Class A 1R Detector, Part No. XPA-HT APO. The component are also identified as 14017APO/ Sales Code XPA-CB APO by the client. Device type wireless Combined Sounder and Detector Base, XPANDER, Part No. XPA-WB APO with mounted detector XPANDER Class CS Heat Detector, Part No. XPA-HT APO. The component are also identified as 14018APO/ Sales Code XPA-CB APO by the client. Device type wireless Combined Sounder and Detector Base, XPANDER, Part No. XPA-WB APO with mounted detector XPANDER Optical Smoke Detector, Part No. XPA-OP APO. The component are also identified as 14016APO/ Sales Code XPA-CB APO by the client. Device type wireless Detector Base, XPANDER, Part No. XPA-WB APO with mounted detector XPANDER Class A 1R Detector, Part No. XPA-HT APO. The component are also identified as 11170APO/ Sales Code XPA-CB APO by the client (not testet as wireless component). Device type wireless Detector Base, XPANDER, Part No. XPA-WB APO with mounted detector XPANDER Optical Smoke Detector, Part No. XPA-OP-2034-APO. The component are also identified as 12034APO/ Sales Code XPA-CB APO by the client (not testet as wireless component). Device type wireless Detector Base, XPANDER, Part No. XPA-WB APO with mounted detector XPANDER CS Heat Detector, Part No. XPA-HT APO. The component are also identified as 11171APO/ Sales Code XPA-CB APO by the client (not testet as wireless component). Device type wireless Manual Call Point XPANDER, Part No. XPA-MC APO. The client has also defined the component as APO/ Sales Code XPA-MC APO. Device type wireless IO Unit XPANDER Single I/O Unit, XPA-IN APO. The client has also defined the component as APO/ Sales Code XPA-IN APO. Device type EDE221-I ESMI Essentia Heat Detector with short-circuit isolalator Device type EDE222-I ESMI Essentia Optical Smoke Detector with short-circuit isolalator Device type EME216-I ESMI Essentia Twin Input/Output unit with shortcircuit isolator 0359-CPD CPD CPD CPD CPD CPD CPD CPD CPR-F2096 and DOP DP17001GB 0832-CPR-F2097 and DOP DP17000GB 0832-CPR-F2095 and DOP DP17010GB Tlf.: Page 6 of 10

7 Bilag/Annex: 1 (continued) Device type EME216-I ESMI Essentia Twin Switch Monitor with shortcircuit isolator Device type EME210-I ESMI Essentia Switch Monitor with short-circuit isolator Device type EME212-I ESMI Essentia Intelligent Input/ Output Unit with short-circuit isolator Device type EME213-I ESMI Essentia DIN-Rail Input/ Output Unit with short-circuit isolator Device type EME214-I ESMI Essentia DIN-Rail Switch Monitor with short-circuit isolator Device type EME215-I ESMI Essentia Mains Switching I/O Unit with short-circuit isolator Device type EDE223-I ESMI Essentia Smoke/Heat Multi-Criteria Detector with short-circuit isolator Device typr ECE221-I ESMI Essentia Manual Call Point with short-circuit isolator Device type ECE221I6 ESMI Essentia Manual Call Point with short-circuit isolator 0832-CPR-F2095 and DOP DP17009GB 0832-CPR-F2093 and DOP DP17004GB 0832-CPR-F2093 and DOP DP17005GB 0832-CPR-F2093 and DOP DP17006GB 0832-CPR-F2093 and DOP DP17007GB 0832-CPR-F2094 and DOP DP17008GB 0832-CPR-F2098 and DOP DP17002GB 0832-CPR-F2187 and DOP DP17011GB 0832-CPR-F1220 and DOP DP17011GB Tlf.: Page 7 of 10

8 Bilag/Annex: 2 PRØVNINGSDOKUMENTATION TEST DOKUMENTATION Akkediteret laboratorium Accredited laboratory Rapport nr Report no. Dato Date SP 6P Tlf.: Page 8 of 10

9 Bilag/Annex: 3 TEKNISK DOKUMENTATION TECHNICAL DOCUMENTATION Titel Name Reference Refence Dato Date Installation manual/danish user guide FX101 Installation and commissioning manual_dk.pdf Date modified Short guide in Danish FX101 User manual DK.pdf Date modified Tlf.: Page 9 of 10

10 Bilag/Annex: 4 Limitations No information has been found in the documentation that any of the devices are intended to be used to take care of input signals from fire protection equipment. The verification of the compatibility testing is limited to the loop connection between the FX101A and the connected alarm components on the loop. Tlf.: Page 10 of 10