10.6 Schedule of Accreditation
|
|
- Conrad Perry
- 5 years ago
- Views:
Transcription
1 Inspection Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment requirements for the operation of various types of bodies performing inspection Address. P.O. Box: Abu Dhabi United Arab Emirates Bureau Veritas S.A. Abu Dhabi Branch - Type A Issue No: 01 Issue Date: 15 th February 2018 Contact: Sofien Masmoudi Tel: Fax: bvadh@eim.ae Web Address: Locations where certification activities covered by the above Accreditation Standard are undertaken 1- Address: P.O. Box: Abu Dhabi United Arab Emirates For the following scope: Version: 3.2 Page 1 of 7
2 Scope: 30. Inspection 30.2 Industrial Equipment and Machniery Lifting Equipment others (Inspection of Non-Destructive Testing) Scope details are as follows: Version: 3.2 Page 2 of 7
3 Product Category Items, Materials or Products Type of Inspection Lifting Equipment Specification, Standard Method Or Technique Used Mobile Crane BS :2012 BS :2012 Tower Crane BS :2012 BS :2012 Electric Overhead Traveling (EOT) Crane BS EN :2006+A1:2009 BS EN :2006+A1:2009 BS :2012 BS ISO 4309:2010 Building Maintenance Units (BMUs) BS EN 1808:1999+A1:2010 Escalator BS EN 115-1:2008+A1:2010 BS EN 115-1:2017 Version: 3.2 Page 3 of 7
4 Product Category Items, Materials or Products Type of Inspection Specification, Standard Method Or Technique Used Elevator BS EN 81-1:1998+A3:2009 BS EN 81-2:1998+A3:2009 BS EN 81-20:2014 BS EN 81-50:2014 Forklift BS EN ISO :2008 BS EN ISO :2012 BS EN ISO :2016 BS EN :1998+A3:2012 Mobile Elevating Work Platform (MEWP) BS EN 280:2013 +A1:2015 Lifting Equipment Wire Rope Slings BS EN :2003+A2:2008 BS EN :2003+A2:2008 BS EN :2003+A1:2008 Webbing Slings BS EN :2000+A1:2008 BS EN :2000+A1:2008 Shackles BS EN 13889:2003+A1:2008 BS 3551:1962 Chain Slings BS EN 818-1:1996+A1:2008 BS EN 818-2:1996+A1:2008 BS EN 818-3:1999+A1:2008 BS EN 818-4:1996+A1:2008 BS EN 818-5:1999+A1:2008 BS EN 818-6:2000+A1:2008 BS EN 818-7:2002+A1:2008 Version: 3.2 Page 4 of 7
5 Vehicles Boiler, Above Ground Storage Tanks, Construction Steel Structure, Pressure Vessels, Pipes, Heat Exchangers GRP/ GRE Turn Buckle BS EN 818-4:1996+A1:2008 Chain Blocks BS EN 13157:2004+A1:2009 Lever Hoists BS EN 13157:2004+A1:2009 Jaw Winches BS EN 13157:2004+A1:2009 Eye Bolts and Eye Nuts BS EN ISO 3266:2010 +A1:2015 Fall Arrestor BS EN 341:2011 Full Body Harness BS EN 361:2002 Inspection & validation of CNG Vehicle Conversion Workshops as TPI. Inspection of CNG converted Vehicles by installing the Retrofit Conversion Kits as TPI raw material inspection, welding inspection, fabrication process inspection, Heat Treatment verification, Visual and Dimension inspection, witness of pressure test, painting inspection, witness of NDT and review of NDT records, document review visual inspection, witness dimension inspection, witness test, quantity inspection, witness of NDT and review of NDT records, document review Inspection of CNG Vehicle conversion Workshops during initial validation, certification and periodically Inspection of CNG converted Vehicles after installation, replacement, changes, repair and periodically UAE Regulation of natural Gas Driven Vehicles (Decision No: 53\ 2014, Publication in official gazette: 31/08/2014) UAE Regulation of natural Gas Driven Vehicles (Decision No: 53\ 2014, Publication in official gazette: 31/08/2014) ASME Sec VIII Division I, API 650 or API 653 for in-service, ANZI Z1.4:2008, ASME SecI, AWS D1.1, API 1104, API 608, API 603, ASME Sec V, Sec IX, ASME B 31, ASME Sec V, Sec IX, ASME B31, API 510, API 650, ANSI, BSEN stds, API 570, API580, BS EN 10204:2004, ASME Sec V, ASNT, EN 473 ASTM D2563 Version: 3.2 Page 5 of 7
6 Magnetic Particle Examination, Ultrasonic Testing, Radiographic Witness Test, witness of NDT and review of NDT Examination, Positive records, Document Review Alloy Material Identification welding inspection Review of WPS, Witness of PQR, Witness of Welder Qualification Material inspections (Plate, visual inspection, witness dimension inspection, Pipes, Shapes, Pipe witness test, quantity inspection, witness coating fittings, valve components inspection, welding inspection, witness of NDT and etc.) review of NDT records, document review visual inspection, witness dimension inspection, Oil and Natural Gas Pipe witness test, quantity inspection, witness coating Lines Installation and inspection, welding inspection, witness of NDT and Maintenance review of NDT records, document review raw material inspection, welding inspection, fabrication Vehicles, Equipment and process inspection, Heat Treatment verification, Visual Machinery Technical and Dimension inspection, witness of pressure test, Testing-Pressure Vessels painting inspection, witness of NDT and review of NDT records, document review thermography survey Leak Detection and Repair/ FEM thermography survey ASME Sec V, ASME Sec V, ASME B 31.3, ASME Sec VIII Div. 1, ASTM E for CS and LA steels, ASTM E for SS ASME B31.3, API 1104, API 650, Sec IX - ASTM, API, ASME or ANS ASME B31.4, ASME B ADR.2017 Version requirements - NFPA70B, 70E, ISO EN 9712:2012, UNI , ISO , ISO Leak Detection and Repair/ FEM - USEPA Method 21 Version: 3.2 Page 6 of 7
7 Note: the text in blue indicates the new scope OR update in the Edition of a test method in this issue of the schedule of accreditation. Bureau Veritas S.A. Abu Dhabi Branch - Inspection Body is recorded as issuing accredited certificates to organizations in the countries listed below. This list is current at the time of issue of this schedule. United Arab Emirates Bahrain Saudi Arabia Oman Qatar Kuwait Yemen Version: 3.2 Page 7 of 7
10.17 Scope of Accreditation
Inspection Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment requirements for the operation of various
More informationElite Safety Consultants. Your One Stop Safety Solution Provider Safety: It s a choice and not a chance. A glimpse at our Profile
Your One Stop Safety Solution Provider Safety: It s a choice and not a chance A glimpse at our Profile We have been accredited by (DAC) Dubai Accreditation Centre of Dubai Municipality List of Accredited
More informationAnnex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Address : İçerenköy Mah. Umut Sk. E5 Yanyol Üzeri AND Binası No:12 İç Kapı No :4 Ataşehir/ 34752 İSTANBUL/TÜRKİYE Phone : 0 216 651 08
More informationAnnex of the Certificate (Page 1/7) Scope of Accreditation
Annex of the Certificate (Page 1/7) Scope of Accreditation As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone : 0 216 313 14 20 Fax : 0 216
More information10.6 Schedule of Accreditation
Testing Laboratory is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration laboratories
More information10.6 Schedule of Accreditation
Accreditation Manager: Product Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements
More information10.6 Schedule of Accreditation
Accreditation Manager: Product Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements
More information... II.. s::. U II!.! 0 I Q I! n) ~}.St.ll ~I Jq~ (Jql.siLII U" I? o Jq~ GCC Standardization Organization. Designation of a Notified Body
... II.. s::. U II!.! 0 I Q I! n) ~}.St.ll ~I Jq~ (Jql.siLII U" I? o Jq~ GCC Standardization Organization Designation of a Notified Body The GCC Standardization Organization (GSO) hereby affirms that Bureau
More information10.6 Schedule of Accreditation
Product Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements for bodies certifying
More informationFRIDAY, NOVEMBER 23, WORKPLACE SAFETY AND HEALTH (APPROVED CODES OF PRACTICE) NOTIFICATION 2018
FRIDAY, NOVEMBER 23, 2018 1 First published in the Government Gazette, Electronic Edition, on 23 November 2018 at 5 pm. No. 3135 WORKPLACE SAFETY AND HEALTH (CHAPTER 354A) WORKPLACE SAFETY AND HEALTH (APPROVED
More informationProposed standards for Chinese national adoption
Proposed standards for Chinese national adoption 1. Toys BS EN 71 *BS EN 71-1:2011+A3:2014 Safety of toys. Mechanical and physical properties (work in hand) BS EN 71-2:2011+A1:2014 Safety of toys. Flammability
More information10.6 Schedule of Accreditation
Accreditation Manager: Testing Laboratory Accreditation No. ATL0029 is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, General requirements for the
More informationCyrus Reclaimer & Engineering Services Private Limited
+91-8048601244 Cyrus Reclaimer & Engineering Services Private Limited https://www.indiamart.com/cyrus/ We are engaged in manufacturing and supplying a wide range of Wire rope slings, chain & lifting tackels.
More informationCorporate Presentation. 14 June 2009
Corporate Presentation 14 June 2009 History 1979 - Ducab was formed as a joint venture between Government of Dubai and BICC Group of the UK History Quality Systems & Certification Awards 2001 Ducab jointly
More information... II.. s:. U".!.! 0 I a'.! n) '4-!J..SZ.ll ~~ Jq~ (Jql.sii.JI u l?o Jq~ GCC Standardization Organization. Designation of a Notified Body
.... II.. s:. U".!.! 0 I a'.! n) '4-!J..SZ.ll ~~ Jq~ (Jql.sii.JI u l?o Jq~ GCC Standardization Organization Designation of a Notified Body The GCC Standardization Organization (GSO) hereby affirms that
More informationLow Voltage Catalogue_Final ai 11/8/09 11:37:27 AM BICC 1 BICC Final Brochure-NEW.indd 1 7/5/10 3:02 PM
1 2 INTRODUCTION Established in 1979, Ducab is the leading cable manufacturing company in the region and is equally owned by the Governments of Dubai and Abu Dhabi. Ducab has three major manufacturing
More informationRAFCO Trading Co. P.O. Box: 2548 Abu Dhabi United Arab Emirates.
RAFCO Trading Co. P.O. Box: 2548 Abu Dhabi United Arab Emirates. Tel. 971 2 6311351 Fax. 971 2 6315211 rafco@emirates.net.ae www.rafco.com Rafco is a leading company in water technology that has been servicing
More informationTSSA Fuels Safety High Pressure Piping Code, TSSA HPP-2017 November 2017
TSSA Fuels Safety High Pressure Piping Code, TSSA HPP-2017 November 2017 Technical Standards and Safety Authority Fuels Safety Program 345 Carlingview Drive Toronto, ON M9W 6N9 Tel: 1.877.682.8772 Fax:
More informationG-Marking Low Voltage Electrical Equipment & Appliances. GCC-GSO Conformity Assessment Scheme (RCAS)
G-Marking Low Voltage Electrical Equipment & Appliances GCC-GSO Conformity Assessment Scheme (RCAS) 1 Agenda TOPIC G-Marking Scheme Overview G-Marking Now and Post July 2016 Affected Products, Standards,
More informationDETAIL OF NOTIFICATION SCOP. GSO Technical Regulation. GCC Technical Regulation on Children Toys BD
Locations where notification activities covered: Address: West side of 1/F and 3,4,5/F of Bldg. 1, 1-5/F of Bldg. 3, Yuanzheng Science and Technology Industrial Park, No. 4012, Wuhe Ave. North, Bantian
More informationFire Resistant Cables
Fire Resistant Cables Ducab (Abu Dhabi) Factory P.O. Box 9171, Abu Dhabi, UAE Tel: (971-2) 502 7777 Fax: (971-2) 502 7888 email: ducab@ducab.com Ducab Connect P.O. Box 11529, Dubai, United Arab Emirates
More informationthe product and service handbook.
about us. Energy Products Oilfields Equipment LLC was established with the objective of providing quality equipment, products and services to Oil and Gas, Petrochemical and Utilities industries within
More informationVIBSPECTRUM INTERNATIONAL LLC
VIBSPECTRUM INTERNATIONAL LLC DUBAI HEAD OFFICE COVERING MIDDLE EAST. FUJAIRAH ABU DHABI OMAN SAUDI ARABIA An ISO 9001:2008 Certified Company ISO 14001.2004, OHSAS 18001 : 2007 Certified company. COMPANY
More information7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Task description Type of equipment
More informationSteel, Civil, MEP & Telecommunication Infrastructure Service Providers MEP Profile
Steel, Civil, MEP & Telecommunication Infrastructure Service Providers MEP Profile 1 Gulf Turrets Presence BAHRAIN QATAR U.A.E. - Dubai U.A.E. - Abu Dhabi OMAN ISO 9001:2008 ISO 14001:2004 OHSAS 18001:2007
More informationInspection and Test Plan for Switchgear
Inspection and Test Plan for Switchgear No. Inspection and Test Plan Reference Document Acceptance Criteria Verifying Document Activity By Remark Manuf. TPI Client 1 Pre Inspection Meeting Spec. Spec.
More informationSouth Seas Inspection (S) Pte Ltd
PRESENTATION October 2009 SSI, your essential business partner for comprehensive & professional Derrick Building, Inspection, Maintenance, Repair & Operational Services to the Oil & Gas, Marine & General
More informationContents. EN :2012 (E) Issue 5 ( ) Page
Contents Page Foreword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Symbols and abbreviations... 7 5 Determination of inspection and testing requirements... 8 5.1 General...
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10893-5 First edition 2011-04-01 Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection
More informationRADAR REFLECTOR STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 RADAR REFLECTOR JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation with
More informationGovernment Gazette Staatskoerant
Government Gazette Staatskoerant REPUBLIC OF SOUTH AFRICA REPUBLIEK VAN SUID AFRIKA Regulation Gazette No. 10177 10701 Regulasiekoerant Regulation Gazette Vol. 621 24 March Maart 2017 No. 40713 PART 1
More informationVISION MISSION. To be internationaly renowned customer focused company offering comprehensive solutions and quality products
MESSAGE Over the last few years, JGB has been continually evolving to position itself as a leading supplier of various engineered products in the region. These are indeed exciting times for the company,
More informationEXPRESSION OF INTEREST (EOI) FOR. Fire Fighting System (FFS)
EXPRESSION OF INTEREST (EOI) FOR Fire Fighting System (FFS) KWtE-03-PR-EO-ACC-0 Rev01 11 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 5 1 Project overview ACCIONA s Engineering, Procuring
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Issue No: 007 Issue date: 16 February 2018 Level 2 5 Harbour Exchange Square London E14 9GE Contact: Owen Bian Tel: +44 (0)20 7868 1509 E-Mail: info@ccqs.co.uk Website: www.ccqs.co.uk Inspection performed
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17021-1:2015 to provide quality 4th Floor Vivo Building 30 Stamford Street SE1 9LQ United Kingdom Contact: Mr D P Koek
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10438-1 Second edition 2007-12-15 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 1: General requirements
More informationNuclear Electric Heating
Nuclear Electric Heating Caloritech has exceeded the most demanding nuclear heating requirements for over 30 years. We design and manufacture products for nuclear applications in PWR, BWR and PHWR nuclear
More informationSummary of Chapters NFPA 1911: Standard for the Inspection, Maintenance, Testing, and Retirement of In- Service Automotive Fire Apparatus
Summary of Chapters NFPA 1911: Standard for the Inspection, Maintenance, Testing, and Retirement of In- Service Automotive Fire Apparatus Applicable to any public or private organization that uses fire
More informationCE Marking and Technical Standardisation
EDITION 3.0 CE Marking and A G A M B I C A T E C H N I C A L G U I D E Technical Standardisation Guidelines for application to Electrical Power Drive Systems CE Marking and Technical Standardisation Guidelines
More informationNB VDE Testing and Certification Institute. Schedule of Notification
Locations where notification activities covered: Address: MerianStrasse 28, 63069 Offenbach, Germany Contact: Mr Wolfgang NIEDZIELLA Tel: +49 69 8306-0 Fax: +49 69 8306-555 Email: vde-institute@vde.com
More informationPressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"
D. EVALUATION ASSESSMENT PROCEDURES Guideline D-01 Guideline related to: Annex III, module G Is design approval by a notified body required under module G? Module G does not explicitly require formal design
More informationE-waste Management in the Arab Region: Status and Opportunities
E-waste Management in the Arab Region: Status and Opportunities Hossam Allam, Ph.D. Regional Programme Manager Strategic Concerns Programme Centre for Environment and Development for the Arab Region and
More informationGroup-1 Agitators. Group-2 Air Conditioning Plant. Group-3 Air Handling Plant / Air Pressurisation System. Group-4 Belts (Conveyor, V & Wedge Belts)
Group-1 Agitators Group-2 Air Conditioning Plant Group-3 Air Handling Plant / Air Pressurisation System Group-4 Belts (Conveyor, V & Wedge Belts) Group-5 Boiler Pressure Parts / Bowl Mills Parts (Developed
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34241-8 SOUTH AFRICAN NATIONAL STANDARD Industrial body belts Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax: +27
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK to provide product conformity Stocking Lane High Wycombe Buckinghamshire HP14 4ND Contact: Mr Alan Gower Tel: +44 (0)1494 569700 Fax: +44
More informationCourse List: Survivex Premises
Course List: Survivex Premises Duration (days) Delegates (max.) Survival approved Basic Offshore Safety Induction & Emergency Training (BOSIET) 3 16 approved Basic Offshore Safety Induction & Emergency
More informationValve Manufacturers Association of America
BUSINESS ASSURANCE Valve Manufacturers Association of America 2016 Technical Seminar: EU s New Legislation Framework (NLF) - What this means to you. Mike Norman 1 VMA Technical Session - March 2016 SAFER,
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13889:2007 Sepistatud terasest tõstesääklid üldotstarbelisteks tõstetöödeks. Rist- ja ümarsääklid. Kategooria 6. Ohutus Forged steel shackles for general lifting purposes - Dee shackles
More informationMARINE GYRO COMPASS STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 MARINE GYRO COMPASS JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation
More informationWelcome to Everyone. Kia ora koutou katoa
Welcome to Everyone Kia ora koutou katoa NZ based since 1989 INTERNATIONAL WIND ENERGY SERVICES THROUGHOUT THE WHOLE VALUE CHAIN Feasibility QHSE regulations consultancy Environmental impact assessment
More informationLOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB LASHING MADE FROM MAN-MADE FIBRES IRISH STANDARD I.S. EN :
IRISH STANDARD I.S. ICS 53.080 55.180.99 National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB
More informationMain changes in BV Rules for Steel Ships
Main changes in BV Rules for Steel Ships Main changes in Bureau Veritas Rules for the Classification of Steel Ships (January 2018 edition, into force on January 1st, 2018), regarding the previous edition
More informationEQUIPMENT & SERVICES PORTFOLIO
EQUIPMENT & SERVICES PORTFOLIO Mechanical, Electrical, & Instrumentation Equipment Supply Life Safety Solutions Fluid Handling Systems Engineering Services Process Heating Solutions Mining Solutions Storage
More informationGALWAY TRADING. P.O. BOX: SHARJAH UNITED ARAB EMIRATES TEL: ; FAX:
GALWAY TRADING P.O. BOX: 31851 SHARJAH UNITED ARAB EMIRATES TEL: +971 6 5616948; FAX: +971 6 5616948 E-MAIL: galwaytr@gmail.com, galwaytr@eim.ae GALWAY TRADING is a dynamic and enthusiastic professional
More informationC A T E R I N G C O M P O N E N T S
CATERING COMPONENTS Since the 90 s we decided to specialize our production in stainless steel and in special alloys working in order to substain different and particular problems of our customers. We cover
More informationISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
More informationDETAIL OF NOTIFICATION SCOPE GSO Technical Regulation. Gulf Technical Regulation for Low Voltage Electrical Equipment and Appliances (BD )).
Locations where notification activities covered: Address: 10, Chungui-ro, Jinju-si, Gyeongsangnam-do, 52852, Rep. of KOREA Contact: Lee Won Bok Telephone: +82 2 860 1306 Facsimile: +82 2 860 1339 Email:
More informationValue engineering developed from global experience
Corporate Profile Value engineering developed from global experience Design and Engineering Capabilities With more than 50 years of experience as a solution provider, EagleBurgmann Expansion Joint Solutions
More informationWe are pleased to offer products covering a multitude of SIC Code categories:
We are pleased to offer products covering a multitude of SIC Code categories: Mechanical Power Transmission Equipment 3010 Torque Converters and Speed Changers 3020 Gears, Pulleys, Sprockets, and Transmission
More informationLetter from GM BASIL AL HANBALI
3 Letter from GM To embark on a journey of success one needs the tools of preparedness, foresight and strategy. These lead to the path of growth and high quality operation. It is imperative to combine
More informationHPDM Volute Casing Pumps Axially Split
HPDM Volute Casing Pumps Axially Split Sulzer Pumps - working with you from design to operation Sulzer Pumps combines more than 135 years of experience in pump development and manufacturing with a deep
More informationASME A17.1/CSA B44 Handbook
2016 Edition ASME A17.1/CSA B44 Handbook ASME A17.1-2016, Safety Code for Elevators and Escalators CSA B44-16, Safety Code for Elevators Kevin L. Brinkman, PE 2016 Edition ASME A17.1/CSA B44 Handbook ASME
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 334:2005 Gaasirõhuregulaatorid sisendrõhule kuni 100 baari Gas pressure regulators for inlet pressures up to 100 bar EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD
More informationSECTION COMPRESSED AIR SYSTEM. A. Pipe and pipe fittings, including valves, unions and couplings.
SECTION 15481 COMPRESSED AIR SYSTEM PART 1 - GENERAL 1.1 SECTION INCLUDES A. Pipe and pipe fittings, including valves, unions and couplings. B. Air compressor. C. After cooler. D. Refrigerated air dryer.
More informationfischer Fireproof pipe installation Certified fire protection for safe fixings. MLAR MLAR R 30
fischer Fireproof pipe installation Certified fire protection for safe fixings. German standard regulations for fire safety requirements for piping systems (11/2005) F 30 Certificate of compliance of the
More informationJOB CODE Country Position Salary details Mode of interview. JOB CODE-385 BAHRAIN Sofa Maker BD BD 170 Tele/Skype
JOB CODE Country Position Salary details Mode of interview JOB CODE-385 BAHRAIN Sofa Maker BD 150 - BD 170 Tele/ JOB CODE-385 BAHRAIN Furniture Spray Painter BD 130 - BD 150 Tele/ JOB CODE-385 BAHRAIN
More informationCLEAN & EXTENDED HEATING SURFACES
CLEAN & EXTENDED HEATING SURFACES EKSTRÖMS VÄRMETEKNISKA AB Ekströms Värmetekniska AB Ekströms Värmetekniska AB is a market leader in the design and supply of economisers, fluegas coolers, air preheaters,
More informationEvaporative Cooling Applicability in the Middle East
Evaporative Cooling Applicability in the Middle East Oxycom Fresh Air BV April 14th, 215 Abstract Oxycom developed various evaporative cooling solutions, either as standalone configurations or as combinations
More informationProforma for Surveillance of Recognized Environmental Laboratory under the Environment (Protection) Act, 1986
Ministry of Environment & Forests, New Delhi Central Pollution Control Board, Delhi Proforma for Surveillance of Recognized Environmental Laboratory under the Environment (Protection) Act, 1986 Surveillance
More informationTHE COMPANY. TECHNICAL OFFICE AND PRODUCTION UNITS. Our company has two production units:
THE COMPANY COMPANY PROFILE. 3S Saldature Speciali Segrate Srl was established in 1970. Since from its origin the Company was oriented to the design and production of equipment-components which are widely
More informationTechnical Specification
Cochran Ltd Newbie Works, Annan, Dumfries & Galloway, Scotland, UK DG12 5QU Telephone: +44 (0)1461 202111 Fax: +44 (0)1461 205511 Email: info@cochran.co.uk www.cochran.co.uk COCHRAN HEAT RECOVERY Package
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13411-5:2003 Terastraadist trosside otsmuhvid. Ohutus. Osa 5: Vedrukammitsaga terastrosshaaratsid Terminations for steel wire ropes - Safety - Part 5: U- bolt wire rope grips EESTI
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Chatsworth Technology Park Dunston Road Chesterfield Derbyshire S41 8XA Contact: Mr M Watson Tel: +44 (0)1246 263861 Fax: +44 (0)1246 260919
More informationBASCO U-TUBE & TANK IMMERSION HEAT EXCHANGERS. ...world leaders in heat transfer technology
BASCO U-TUBE & TANK IMMERSION HEAT EXCHANGERS...world leaders in heat transfer technology BW-533.indd 1 6/7/07 5:33:16 PM Standard Heat Exchanger Designs Deliver Cost Effective Performance To address the
More informationRosemount 3051CFP Integral Orifice Flowmeter
December 2013 Rosemount 3051 Rosemount 3051CFP Integral Orifice Flowmeter See Specifications on page 47 and options for more details on each configuration. Rosemount 3051CFP Integral Orifice Flowmeters
More informationLIST OF MAJOR PROJECTS EXECUTED IN GAS STORAGE
Page 3 of 8 LIST OF MAJOR PROJECTS EXECUTED IN GAS STORAGE Sr. Name of the Customer Location EPC Contractor / TPI Agency Year 1 SAIL Bhilai Steel Plant Bhilai, India TUV 2011-12 (Paul Wurth India Pvt.
More informationExchangers. Air-cooled Heat. Exchangers
Hamon Process Heat Exchangers Air-cooled Heat Exchangers Hamon in a few words Hamon D Hondt factories Hamon offices and factories Hamon started its industrial activities in Europe (Belgium and France)
More informationLONGEVITY SOLUTIONS FEEDWATER HEATERS CONDENSERS HEAT EXCHANGERS PRESSURE VESSELS AIR PREHEATERS ISOLATION DAMPERS AFTERMARKET SERVICES AND PARTS
LONGEVITY SOLUTIONS FEEDWATER HEATERS CONDENSERS HEAT EXCHANGERS PRESSURE VESSELS AIR PREHEATERS ISOLATION DAMPERS AFTERMARKET SERVICES AND PARTS EXPERIENCE. KNOW-HOW. COMMITMENT. SPX HEAT TRANSFER AFTERMARKET
More informationSECTION (15530) - REFRIGERANT PIPING
PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Tubes. 2. Fittings. SECTION 23 23 00 (15530) - REFRIGERANT PIPING 3. Joining Materials. 4. Specialties. B. Related Sections: 1.02 REFERENCES 1. Section
More informationISO INTERNATIONAL STANDARD. Mobile elevating work platforms Design, calculations, safety requirements and test methods
INTERNATIONAL STANDARD ISO 16368 Second edition 2010-05-15 Mobile elevating work platforms Design, calculations, safety requirements and test methods Plates-formes élévatrices mobiles de personnel Conception,
More informationScope of Work and Other Terms & Conditions
Annexture-II Scope of Work and Other Terms Conditions Sl. 1. Removal Disconnection (i) Removal of existing heating elements, insulation brickwork of the side walls, roof, the doors and the bogie hearth.
More informationTrueTech Energy TT - HYD Series
FW&SW HYDROPHORE SET The TT - HYD series is available with storage capacities from 100 to 2,000 Liters. All tanks feature ASME / EN tank construction. SEAWATER & FRESHWATER HYDROPHORE SYSTEM TrueTech hydrophore
More informationHistoric and classic colours. An exclusive collection
Historic and classic colours An exclusive Historic and classic colours Hempel has been a world leading coatings supplier since 1915 for the decorative, protective, marine, container and yacht markets.
More informationSECTION HEATING BOILER FEEDWATER EQUIPMENT
SECTION 23 53 00 HEATING BOILER FEEDWATER EQUIPMENT PART 1 - GENERAL 1.1 SUMMARY A. Section includes boiler feedwater pumps, de-aerators, accessories, controls and tanks. 1.2 REFERENCES A. ASME (American
More informationInternational standards used locally worldwide ISO/TC 67
/ International standards used locally worldwide ISO/TC 67 International standardization for materials, equipment and offshore structures for the petroleum, petrochemical and natural gas industries Cecilie
More informationHRSFUNKE Heat Transfer Group
HRSFUNKE Heat Transfer Group Quality Heat Transfer Solutions HRSFUNKE Heat Transfer Group operates at the forefront of thermal processing technology and is a leading heat transfer specialist. The company
More informationYOUR SINGLE-SOURCE FOR PROFESSIONAL ENGINEERING SOLUTIONS CORPORATE PROFILE
YOUR SINGLE-SOURCE FOR PROFESSIONAL ENGINEERING SOLUTIONS CORPORATE PROFILE ENERGY INTERNATIONAL CORPORATION CORPORATE PROFILE For more than 30 years, Energy International Corporation (EIC) has been a
More informationENGINEERING SPECIFICATION ASU TYPE NITROGEN GENERATION UNIT FOR DIESEL HYDROTREATER UNIT FOR HINDUSTAN PETROLEUM CORPORATION LTD.
ENGINEERING SPECIFICATION FOR DIESEL HYDROTREATER UNIT FOR HINDUSTAN PETROLEUM CORPORATION LTD. VISAKH REFINERY DHT PROJECT TEIL JOB NO. : 6261 DOCUMENT NO: 6261- A - 95-48 -051 A 16-March-09 For Client
More informationspecifications the many advantages of bondstrand gre pipe systems
BONDSTRAND GLASSFIBER REINFORCED EPOXY AND PHENOLIC PIPE SYSTEMS FOR OFFSHORE APPLICATIONS Historically, offshore production platform, drilling rig and FPSO owners and operators have had to face the grim
More informationBULGARIAN ACCREDITATION SERVICES ACCREDITED ACCORDING TO BDS EN/ISO 17020:2005
BULGARIAN ACCREDITATION SERVICES CERTIFICATE FOR ACCREDITATION MULTITEST LTD Inspection Body of Type A Headquartered in Varna, West Industrial Zone, 1, Atanas Dalchev str., p.o.b. 161 UIC: 813141496 SCOPE
More informationSHOP PRIMERS FOR CORROSION PROTECTION OF STEEL PLATES AND SECTIONS
STANDARD FOR CERTIFICATION No. 2.9 SHOP PRIMERS FOR CORROSION PROTECTION OF STEEL PLATES AND SECTIONS OCTOBER 2009 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD
More informationEssex County College - West Essex Campus Addition And Renovations dib # / SECTION HYDRONIC PIPING SPECIALTIES PART 1- GENERAL
Essex County College - West Essex Campus Addition And Renovations dib # 54292 / 11-14 SECTION 232116 - HYDRONIC PIPING SPECIALTIES PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL TECHNICAL SYSTEMS (NTS) - LONGMONT 1736 Vista View Drive Longmont, CO 80504-5242 Mr. Eric Loucks Phone: 303 776 7249 ELECTRICAL Valid To: August 31,
More informationHYDRONIC SPECIALTIES TACO AC(F)-CA 05/08/2008
SECTION 15181 - HYDRONIC SPECIALTIES PART 1 - GENERAL 1.1 SECTION INCLUDES A. Air separators B. Expansion tanks C. Pump accessories 1.2 RELATED SECTIONS A. Section - Plumbing Piping Specialties B. Section
More informationTraining Course Calendar
معهد الزامل العالي للتدريب الصناعي 2018 Training Course Calendar International accreditation State-of-the-art facilities Quality training services 1 1 Introduction Zamil Higher Institute for Industrial
More informationPROFILE. since YEARS DESIGN CONSULTING MANUFACTURING SUPPLY INSTALLATION TESTING COMMISSIONING MAINTENANCE REFURBISHMENT
DESIGN CONSULTING MANUFACTURING SUPPLY INSTALLATION TESTING COMMISSIONING MAINTENANCE REFURBISHMENT PROFILE 2017 Don t Compromise on Fire Safety Choose Certified Quality Products SFFECO 33 since YEARS
More informationReference List - International
Reference List - International We understand solutions! Dated: July 2012 Elektra Elektronik GmbH & Co Störcontroller KG is manufacturer of fault annunciators, telecontrol systems, industry electronics
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14163:2002 Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines Petroleum and natural gas industries - Pipeline transportation systems - Welding
More informationTechnical Specification
Cochran Ltd Newbie Works, Annan, Dumfries & Galloway, Scotland, UK DG12 5QU Telephone: +44 (0)1461 202111 Fax: +44 (0)1461 205511 Email: info@cochran.co.uk www.cochran.co.uk Three Pass Wet Back Reverse
More informationC6 Premium. C6 Premium Copper Systems from Infinique is premium performing Class E / Category 6 Data Communication
Stable and Reliable Data Communication Solutions from Infinique Infinique provides high quality end-to-end solutions for communication infrastructure that bring great value to its customers. We have achieved
More information