TABLE OF CONTENTS 1 AVO TRAINING INSTITUTE MISSION STATEMENT 2 AVO AT A GLANCE 4 TRAINING LOCATIONS 6 ELECTRICAL CONSULTING SERVICES

Transcription

1

2 TABLE OF CONTENTS Click below to view catalog sections. 1 AVO TRAINING INSTITUTE MISSION STATEMENT 2 AVO AT A GLANCE 4 TRAINING LOCATIONS 6 ELECTRICAL CONSULTING SERVICES 8 AVO ELECTRICAL ENGINEERING DIVISION SERVICES 10 AVO INSTRUCTOR OVERVIEW 12 ONLINE TRAINING COURSES 14 ON-SITE TRAINING 16 TECHNICAL CERTIFICATION PROGRAMS 18 ELECTRICAL FUNDAMENTALS COURSES 20 ELECTRICAL SAFETY COURSES 22 THE NEW NFPA 70E 2018 ELECTRICAL SAFETY 29 AVO CABLE U COURSES 2 PROTECTIVE RELAY MAINTENANCE COURSES 38 CIRCUIT BREAKER MAINTENANCE COURSES 2 MOTOR MAINTENANCE COURSES 43 PROGRAMMABLE LOGIC CONTROLLERS MAINTENANCE 4 SUBSTATION MAINTENANCE COURSES 48 ENGINEERING COURSES 50 INFRARED THERMOGRAPHY COURSES 2 AVO TRAINING SALES TEAM 3 REGISTRATION INFORMATION

3 Our Mission After more than 50 years, AVO Training remains a global leader in safety and maintenance training for the electrical industry. We deliver an engaging, hands-on experience for our clients in a professional, real-world environment. We strive to provide industry relevant courses in a practical and flexible learning environment through an ongoing commitment to quality service, integrity, instruction and client satisfaction. Our goal is to convey practical job skills and career development for our clients and students by saving lives through a world-class learning experience. 1

4 AVO 2018 AT A GLANCE THE HANDS-ON DIFFERENCE With more than 57 courses specializing in Electrical Safety & Electrical Maintenance, AVO offers one of the largest selections of electrical training courses available today. With this kind of focus, our courses not only meet the highest industry standards, but provide the hands-on real world skills to keep people safe, compliant and knowledgeable. All delivered with a passion for safety that sets us apart. AVO CABLE U Located in Dallas, TX, our Cable Training Courses (Page 29) cover the full scope of electrical cable learning, including two medium-voltage cable certifications. Cable U begins with a cable field lab that contains more than two miles of buried cable. Allowing technicians the most technologically advanced real world place to learn all aspects of electrical cable. LEARN FROM THE BEST Our instructors are selected from the best the industry has to offer. With an average of 20 years real world experience, they are subject matter experts in their fields. Beyond the world class textbook curriculum, students are exposed to experiences and scenarios only gained by someone who has been there and done that. Many of our instructors sit on national committees, panels and work groups such as NFPA 70E, IEEE, ASSE and others (Page 10). ONLINE TRAINING COURSES Our Online Training Courses are expanding with the new 10 module NFPA 70E 2018 Standards bundle and NEC 2017 Changes Course online. We also continue to add online Recertification, Reinstatement, Refreshers Courses and Exams to our line-up (Page 12). Online will never replace our instructor-led training, however it provides needed Electrical Safety awareness for individuals who work in and around electrical environments. 2 2

5 ADDED CONSULTING SERVICES Our Electrical Consulting Services have expanded to include advising beyond the classroom (Page 6). From Protective Relay and Cable to Generator, Transformer, Swtichgear, Electrical Safety, Breaker and Testing Software, our subject matter experts are here to consult. AVO experts advise, assist and support your technical staff, using your equipment in your environment. MORE TRAINING LOCATIONS Adding strategically located host Training Facilities to our established base, allows us to offer more convenient and affordable training options. These locations are carefully chosen as we partner with established electrical industry leaders. We now have established training partnerships with North American Switchgear in Cleveland, OH, Western Electrical Services in Sumner, WA, and Circuit Breaker Sales NE in Seymour, CT (Page 10). NEW COURSE ADDITIONS Staying current with the changing NFPA 70E standards and OSHA regulations is a necessity in order to keep people safe and compliant. This year we start with the new NFPA 70E 2018 standard updated course (Page 22). All of our electrical safety courses are updated with these new standard changes. Infrared Thermography II (Page 51), Transformer Maintenance and Testing (Page 46) and Advance Transformer Maintenance and Testing (Page 47) in Spanish are other 2018 additions. ARC FLASH STUDIES The AVO Electrical Engineering Division works with utilities, industrial facilities, government, data centers and a wide variety of commercial industries. The Division is staffed with Professional Engineers, Electrical Engineers and Engineering Technicians. Engineering services will expand in 2018 to include Circuit Tracing, Clamp on Ground Study and Power Quality Testing (Page 8). 3

6 TRAINING LOCATIONS OUR TRAINING CENTERS ARE CONVENIENTLY LOCATED THROUGHOUT THE UNITED STATES AVO Training Institute offers open enrollment courses nationwide at conveniently located training and key partner host training facilities. Each location has its own unique type of hands-on lab and equipment including substation equipment, buried cable fields, labs for switchgear, motor controls, relays, transformers and more. Students have ample hands-on time with some courses offering up to 75% in lab experience. Please visit as we continue to add new locations. - AVO TRAINING INSTITUTE VALLEY FORGE, PA - AVO TRAINING INSTITUTE 4271 BRONZE WAY VAN BUREN AVENUE - NORRISTOWN, PA Our main training location and corporate headquarters, Located just 20 miles northwest of Philadelphia, this training located in the center of the DFW Metroplex and convenient to facility is easily accessible from anywhere within the DFW International and Love Field airports. Northeastern United States. 4

7 CLEVELAND, OH - NORTH AMERICAN SWITCHGEAR FONTANA, CA - CALIFORNIA STEEL INDUSTRIES 3180 BEREA ROAD - CLEVELAND, OH AVO brings training to Northeastern Ohio. North American Switchgear is an industry leader in the sales/service of new and used circuit breaker and switchgear. READING, MA - READING MUNICIPAL LIGHT DEPT. 1 CALIFORNIA STEEL WAY - FONTANA, CA This training center is located at California Steel Industries, the leading supplier of steel in the Western US. A short drive from Los Angeles, it s one of our three west coast training centers. SAN LEANDRO, CA - PETERSON CAT 230 ASH STREET - READING, MA This utility serves more than 25,000 customers in its four-town area. It is a conveniently located training facility for students within the New England area. SEYMOUR, CT - CIRCUIT BREAKER SALES NE 2700 TEAGARDEN STREET - SAN LEANDRO, CA Peterson CAT is one of the largest Caterpillar dealers in all of North America. It s one of our three west coast host facilities and located in the East San Francisco Bay Area. SUMNER, WA - WESTERN ELECTRICAL SERVICES 79 MAIN STREET - SEYMOUR, CT Located in the heart of the northeast, this host location is a leader in providing new, surplus, used and reconditioned power distribution equipment, parts and service TH STREET EAST - SUMNER, WA Our newest Pacific Northwest host location provides one of the largest inventories of low-voltage and medium-voltage electrical apparatus, parts and service. 5

8 CONSULTING SERVICES ELECTRICAL SAFETY COMPLIANCE ASSESSMENT Stay compliant with OSHA and NFPA current standards and regulations Assessment of Personal Protection Equipment (PPE) for safety compliance Review of Electrical Safety Work Practices for compliance, current standards and regulations Electrical Hazard Assessments for compliance with OSHA, NFPA 70E, NEC requirements ELECTRICAL CABLE CONSULTING Inspection of problem cable terminations and splices Examination and recommendations of cable installation procedures Confer with Electrical Cable Contractor to prevent future breakdown Assist your technicians in diagnostics, locating, tracing and general troubleshooting ELECTRICAL SAFETY PROGRAM CONSULTING Complete review of the existing facilities Electrical Safety Program Review the existing Electrical Safety Program for compliance with NFPA 70E and OSHA Develop an Electrical Safety Program to meet compliance and avoid costly fines Advise staff on the need for a Safety Program and their role in compliance PROTECTIVE RELAY CONSULTING Provide Just in Time refresher training to an outage or relay job Provide simplified test procedures to supplement relay manufacturer manuals Advise management and training personnel about needs, improvements and procedures Provide on-site technical support in testing, maintaining and calibrating customer relays 6

9 CIRCUIT BREAKER CONSULTING Provide technical support during scheduled shutdown Review manufacturer s maintenance recommendations and develop custom training Assess maintenance practices for compliance with industry standards Explain benefits and demonstrate proper use of test equipment at your facility ELECTRICAL ARC FLASH RISK ASSESSMENT CONSULTING Inspect electrical components for wear and tear Complete audit of equipment maintenance and testing records Evaluate the existing Electrical Safety Program and recommend needed improvement Thorough review of existing engineering reports and equipment labeling RELAY TESTING STANDARDS, FORMS & PROCEDURES CONSULTING Standards & procedures compliance review with manufacturer s and industry standards Review to ensure FERC & NERC compliance Help interpreting testing forms, procedures and standards Assist in reviewing, creating and improving relay test result forms and reports TRANSFORMER CONSULTING Inspect transformers and associated equipment Complete audit of transformer maintenance and testing records Evaluate the existing transformer maintenance program and recommend needed improvements Assist your technicians in diagnostics, general troubleshooting and necessary internal inspections 7 7

10 AVO ENGINEERING The AVO s Electrical Engineering Division is a registered engineering firm. We analyze electrical systems to identify equipment applications that create electrical hazards. AVO Electrical Engineering Division personnel sit on the NFPA 70E and IEEE 1584 committees, so our power system studies are always based on the latest standards. We see compliance as well as improved safety and liability as a by-product of these studies. Our staff consists of licensed Professional Engineers, Electrical Engineers and Engineering Technicians. Licensed in multiple states across the nation, all of our projects are performed under the supervision of our Professional Engineers (PE), who certify and stamp each project. AVO ELECTRICAL ENGINEERING DIVISION SERVICES INCIDENT ENERGY/ARC FLASH HAZARD ANALYSIS An Incident Energy Analysis is the foundation upon which an accurate Arc Flash Risk Assessment is built. Once you have the Incident Energy Analysis, an Arc Flash Risk Assessment can be completed. Also proper Personal Protection Equipment (PPE) and work practices are provided for your workers. According to NFPA 70E, studies are to be updated when a major modification or renovation of the electrical distribution system takes place. NFPA 70E also states that studies are to be updated at intervals that do not exceed five years. This takes into account for any changes in the electrical distribution system that could affect the results of the Incident Energy Analysis. AVO Engineering Division can also perform analysis for DC power systems as studies show that DC systems greater than 50v can pose an Arc Flash Hazard. ARC FLASH RISK ASSESSMENT Our engineers will facilitate a Arc Flash Risk Assessment with key members of your staff to better understand the current Electrical Safety Program and how related risk elements are addressed and may be improved. This Arc Flash Risk Assessment (AFRA) meets the compliance demands of the changing world of NFPA 70E. A Hazard Assessment is required by OSHA while a Risk Assessment is required by NFPA 70E. Both are used to determine increased risk factors for employees who are, or may be, exposed 8

11 to an arc flash incident. Because the approach to undertaking an Risk Assessment can vary and be subjective, ours will includes all the necessary critical elements. PROTECTIVE DEVICE COORDINATION We analyze the characteristics of each protective device to confirm the sequence in which they operate and provide an adequate margin between the operating times of each device. This can prevent an event such as a downstream fault tripping an upstream breaker and shutting down the facility s main power. We also typically mitigate high incident energy levels which can increase the arc flash hazard at a given location. SHORT CIRCUIT STUDY A short circuit study should be performed when an electrical system is first designed and then updated if major system modifications or renovations occour. It should be done no less than every five years due to probable changes in the utility contribution to the power distribution system. A proper shortcircuit study will determine if your equipment is properly rated in the event of a fault within the electrical distribution system. LOAD FLOW STUDIES A load flow study calculates the voltage drop on each feeder, the voltage at each bus and the power flow and losses in all branch and feeder circuits. ELECTRICAL SHOCK HAZARD A Shock Hazard Analysis is included as a part of our Arc Flash Incident Energy Analysis and shock protection boundaries are printed on the arc flash warning labels. testing on the electrical equipment, including service entrance, to determine the power quality, including power factor. A poor power factor, typically less than 95%, could result in excess penalties from the utility company. Power factor correction recommendations are included as part our full engineering report. All AVO engineering reports are signed and sealed by a professional engineer. INFRARED THERMOGRAPHY We have Certified Infrared Level II and Level III technicians on staff. These technicians are certified through the American Society for Nondestructive Testing (ASNT). Infrared Thermography allows the surface temperature of the electrical distribution equipment to be measured via an infrared scan. This determines if a potential problem exists within the equipment. Hot-spots are seen as visual images as well as other crucial data such as temperature. These readings are provided within our report. CLAMP-ON GROUND STUDY AVO qualified technicians perform a clamp-on ground study on the electrical equipment. Improper grounding can cause havoc on an electrical distribution system, and in the event of a fault, can cause harm or even death to someone working on improperly grounded equipment. Resistance measurements are taken with a Clamp-On meter at each piece of electrical equipment to verify the electrical equipment is solidly grounded, providing a reliable low resistance path to ground in the event of a fault. A full engineering report with recommendations is provided. The report is signed and sealed by a professional engineer. CIRCUIT TRACING AVO technicians use the latest equipment and methods to trace and identify all loads on the specified panelboards, switchboards, or other electrical equipment. AVO prints and installs labels for each traced circuit on the panelboard, switchboard, or other electrical equipment while on site. AVO will also install a panel schedule in a clear sleeve on the equipment. TRANSIENT MOTOR STARTING ANALYSIS In performing Transient Motor Starting Analysis, we simulate starting electrical motors looking for potential power system issues. Finding excessive voltage drops that can occur during motor startup, that cause a problem on a distribution system. HARMONICS ANALYSIS High harmonic distortion levels can wreak havoc upon a power distribution system. We analyze your power system to determine if there are distortion issues that may be caused by harmonics. Harmonic distortion can be caused by an introduction of nonlinear loads upon a given power distribution system, such as AC or DC motor drives variable frequency drives (VFDs), DC converters, switch-mode power supplies, rectifiers, etc. Our Harmonics Analysis meets the current IEEE 519 standard. POWER QUALITY TESTING/POWER FACTOR CORRECTION AVO uses the latest testing equipment and practices to perform 9

12 LEARN FROM THE BEST We rely on our people their enthusiasm, talent and commitment to make every course our students attend a success. Our Instructors have decades of electrical experience in utility, military, manufacturing, industrial and commercial industries. Each one of them is hand-picked for their combination of experience and teaching ability. AVO Training Instructors are articulate, organized, responsive to student needs and passionate about the topics they teach. Each of our instructors are active in industry associations. They attend conferences and participate in research committees, workgroups and panels supporting the advancement of the electrical industry around the world. To be the best, you need to learn from the best. 10

13 Blueprint: AVO Instructor 20 Years Average Field Experience Enthusiasm & Commitment Dedicated & Passionate Subject Matter Experts Hand-Picked for Experience Varied Industry Experience Responsive to Student Needs Articulate & Organized Instructor Committees & Associations National Safety Council MSHA Part 48 Training IEEE Facilities Engineering NFPA 70E Principal Committee Member American Society of Safety Engineers International Association of Electrical Inspectors Institute of Electrical and Electronics Engineers National Fire Protection Association Fiber Optics Association, Inc. OSHA Authorized General Industry Trainer IEEE 1584 Work-group Member International Assoc. of Electrical Inspectors Infrared Thermographer Certification Level 2 American Society for Non-Destructive Testing Live Line Bare Hand Certification Registered P.E. SW Electrical Metering Assoc. Certified ERCOT Meter Facility Inspector Rio Grande Damage Prevention Education Instrument Society of America American Society of Training and Development Certified: Building Official Electrical Code Official Electrical Plans Examiner Commercial Electrical Inspector Residential Electrical Inspector Residential Building Inspector Residential Mechanical Inspector Lockout Energy Control Certification Fall Hazard Control Certification Aerial Lift Certification Confined Space Entry Certification Hazard Recognition Certification Hazard Communication & Rigging Certification Health & Safety Training Supervisor Certification IEEE P45.5 (Shipyard Safety) Secretary 11

14 AVO ONLINE COURSES TWO BUNDLED MODULE CHOICES ONLINE, ALL WITH NFPA 70E 2018 UPDATES AVO Online Arc Flash Electrical Safety Awareness has been updated with the new NFPA 70E 2018 standard. A new module, Introduction to Shock Hazard Risk Assessment has been added, rounding out the bundle to 10 modules. A Mini-Bundle of 5 select modules is also available. The complete 10-Module Bundle, Arc Flash Electrical Safety Awareness with NFPA 70E 2018 $449 per bundle. The 5-Mini-Bundle Arc Flash Electrical Safety Awareness with NFPA 70E 2018 contains modules 3, 4, 8, 9 and 10 $245 per bundle. INDIVIDUAL MODULES CAN BE PURCHASED SEPARATELY FOR $49 EACH 12

15 NEC 2017 CODE CHANGES COURSE ONLINE For your convenience the 2017 National Electrical Code Changes course and updates are available online. The major revisions are explained in the NEC 2017 edition and the substantiation for those changes is addressed. SUBSTATION RECERTIFICATION AND REINSTATEMENT For those who previously received an AVO Substation Maintenance Technician Certification, becoming recertified or reinstated is more convenient than ever. Recertification and Reinstatement Exams are now available online. A 2-hour video presentation, includes review questions between video segments, and a final test for $49 Recertification Refresher Course and Exam purchased together $700 or separately at $400 each. We also offer a Reinstatement Exam For $750 each or $1000 bundled with a Refresher Course. 13

16 WE LL COME TO YOU EXPERIENCE THE BENEFITS OF ON-SITE TRAINING If for any reason you can t come to us, we ll come to you. Not seeing a training location in your area or prefer that we travel to your facility for on-site training? On-site training keeps travel expenses down, while allowing your organization to receive the benefits of an effective electrical maintenance and safety training program. Our Account Executives are standing by to discuss your training needs. They will set-up a training course at your facility with your people in your environment using your equipment. Contact us today and ask about our on-site training. Eliminate personnel travel time and associated expenses Address your specific equipment and systems Choose the course schedule - mornings, afternoons, evenings and weekends Have personnel available on site should an emergency situation occur Ensure consistent training message for all of your personnel Personnel trained in a familiar work environment Have privacy to discuss company specific concerns 14

17 CUSTOMIZE COURSES DEVELOPED TO FIT YOUR SITUATION We develop custom courses for all types of industries. If you don t find the course or courses that match your electrical safety and maintenance needs, we will develop a custom course that fits your specific equipment or your training needs. The course will be designed to specifically meet the objectives desired to keep your personnel safe from electrical hazards. Our electrical safety experts are available to help with your safety development projects, while saving you time and money. Ability to tailor business specific policies, procedures and concerns Flexible course content and length based on specific needs Employees receive the same level of training over several sessions Customize course length by adjusting content covered Adjust course content by topics and equipment models addressed Pre and post testing available to measure before and after knowledge Training on your equipment or products eliminates generalities 15

18 AVO CERTIFICATION PROGRAM ADVANTAGE CHOOSE FROM 12 ELECTRICAL TECHNICIAN CERTIFICATION PROGRAMS An AVO Training Electrical Technician Certification offers many benefits. Not only do our 12 Certifications help improve technical knowledge and job skills, they also enable career opportunities and the ability for companies to be more successful when bidding projects. The hands-on training portion of our Technician Certification assist employers in qualifying their technicians. Qualified Persons, by definition, are required to demonstrate skills and knowledge related to the construction and operation of electrical equipment and installations. In addition, all AVO Electrical Certifications help meet the retraining requirements of NFPA 70E-2018 paragraph 110.2(A)(3). SUBSTATION MAINTENANCE TECHNICIAN CERTIFICATION Courses required within 18 months: Substation I, Substation II and either Electrical Safety for Utilities or Electrical Safety for Industrial Facilities MEDIUM-VOLTAGE CABLE TECHNICIAN CERTIFICATION Courses required within 18 months: Cable Splicing and Terminating and Cable Fault Location & Tracing MEDIUM-VOLTAGE CABLE TESTING & DIAGNOSTICS CERTIFICATION Cable Testing & Diagnostics, Medium-Voltage Course FIBER OPTICS TECHNICIAN CERTIFICATION Fiber Optics Technician - FOA Course 16

19 LOW-VOLTAGE CIRCUIT BREAKER TECHNICIAN CERTIFICATION Courses required within 18 months: Circuit Breaker Maintenance, Low- Voltage, Circuit Breaker Molded & Insulated Case and either NFPA 70E Electrical Safety or OSHA Electrical Safety Related Work Practices WE OFFER FOUR RELAY TECHNICIAN CERTIFICATIONS 1. Protective Relay Maintenance, Basic 2. Protective Relay Maintenance, Advanced 3. Protective Relay Maintenance, Solid-State 4. Protective Relay Maintenance, Generation INDUSTRIAL ELECTRICAL SAFETY INSPECTOR CERTIFICATION Courses required within 18 months: National Electrical Code and Electrical Safety for Inspectors WE OFFER TWO INFRARED THERMOGRAPHY CERTIFICATIONS Infrared Thermography - Level I Course Infrared Thermography - Level II Course 17

20 FUNDAMENTAL COURSES Dec 11-14, 2017 Apr 23-26, 2018 Aug 27-30, 2018 Nov 6-9, 2018 FONTANA, CA Feb 20-23, 2018 Oct 22-25, 2018 READING, MA Apr 2-5, 2018 SEYMOUR, CT Jun 18-21, 2018 Sep 17-20, 2018 BASIC ELECTRICAL TROUBLESHOOTING HANDS-ON COURSE DAYS 3.2 CEU $1,365 Safe and systematic troubleshooting methods that greatly enhance technician skills is the focus of this course. This hands-on course is intended for electricians, technicians and supervisors responsible for troubleshooting electrical system problems. Component identification, ladder diagram interpretation, and correct multimeter usage are key components to this course. The ability to effectively and safely troubleshoot electrical systems is an essential skill for any technician responsible for maintenance in an industrial, commercial or utility environment. Mar 12-16, 2018 Aug 6-10, 2018 ELECTRONICS FOR ELECTRICIANS HANDS-ON COURSE DAYS 3.6 CEU $1,365 This hands-on course is intended for new or experienced electricians and technicians whose job responsibilities will require them to install, repair or replace electronic components in electrical systems. More electronic and solid-state devices are being integrated into power systems than ever before. Electricians and technicians are encountering these devices within uninterruptible power supplies. Information is provided to properly install and test electronic components. CLEVELAND, OH May 21-24, 2018 Aug 13-16, 2018 Dec 3-6, 2018 Nov 27-30, 2017 Jan 22-25, 2018 Mar 26-29, 2018 Jun 11-14, 2018 Oct 15-18, 2018 READING, MA May 7-10, 2018 SEYMOUR, CT Apr 16-19, 2018 Nov 13-16, 2018 VALLEY FORGE, PA Oct 16-19, 2017 ELECTRICAL PRINT READING-ANSI HANDS-ON COURSE DAYS 3.2 CEU $1,365 This hands-on course provides instructions and exercises in the proper use of electrical print documents. Knowing how to read electrical drawings is critical when performing acceptance of new equipment and in troubleshooting existing equipment. There are many types of prints that utilize hundreds of symbols established by ANSI. Course participants will be shown how to identify symbols and how to unravel this common language for electrical equipment. It is intended for new or experienced electricians and technicians that install, maintain, repair or troubleshoot power and auxiliary systems. Equipment application, troubleshooting and print revision methods to correctly reflect equipment changes will be demonstrated. 18

21 Dec 5-8, 2017 Apr 16-19, 2018 Aug 20-23, 2018 Oct 30 - Nov 2, 2018 FONTANA, CA Feb 12-15, 2018 Oct 15-18, 2018 SEYMOUR, CT Jun 11-14, 2018 Sep 10-13, 2018 BASIC ELECTRICITY LECTURE COURSE DAYS 3.2 CEU $1,375 This course is intended for new or cross-training technicians, electricians and supervisors responsible for maintenance of electrical equipment. Basic information regarding quantifying and measuring basic elements in an electrical circuit is provided. Participants are familiarized with multi-meter usage and basic electrical circuit components. Improper fundamentals training may result in technicians performing tasks without understanding the reason why or the implications of the changes. Mar 19-23, 2018 Aug 13-17, 2018 ELECTRONICS TROUBLESHOOTING HANDS-ON COURSE DAYS 3.6 CEU $1,365 This course focuses on understanding the fundamentals of electronic circuits in order to properly install, test, and troubleshoot electronic components. It is built on the foundation of the Electronics for Electricians course. It is intended for electricians and technicians who install, repair or troubleshoot electronic systems. Students will learn systematic troubleshooting and knowledge of various types of electronic circuits combined with a systematic troubleshooting approach. Oct 3-5, 2017 Dec 18-20, 2017 May 30 - Jun 1, 2018 Jul 24-26, 2018 Oct 9-11, 2018 VALLEY FORGE, PA Feb 5-7, 2018 Aug 1-3, 2018 GROUNDING & BONDING HANDS-ON COURSE 417B 3 DAYS 2.4 CEU $1,555 This course focuses on the grounding and bonding requirements contained in Article 250 of NEC. Topics addressed include: definitions, grounded (neutral) conductor requirements, sizing equipment grounding conductors, equipment bonding jumpers, grounding electrode conductors, and main bonding jumpers. Students will learn to identify types of grounding electrodes, requirements for multiple grounding electrodes, bonding requirements for nonelectrical equipment, the purpose of impedance or resistance grounding, requirements for an isolated grounding system and grounding and bonding requirements for the line-side and the load-side of the service disconnecting means. 19

22 ELECTRICAL SAFETY CLEVELAND, OH Jun 4-7, 2018 Dec 10-13, 2018 Sep 18-21, 2017 Nov 6-9, 2017 Jan 22-25, 2018 Feb 12-15, 2018 Apr 23-26, 2018 May 21-24, 2018 Jul 23-26, 2018 Aug 27-30, 2018 Sep 24-27, 2018 Nov 5-8, 2018 FONTANA, CA Nov 28 - Dec 1, 2017 Jan 29 - Feb 1, 2018 Apr 16-19, 2018 Sep 17-20, 2018 Nov 13-16, 2018 SAN LEANDRO, CA Jan 16-19, 2018 Jun 11-14, 2018 SEYMOUR, CT Dec 4-7, 2017 Jul 23-26, 2018 SUMNER, WA Feb 20-23, 2018 Jul 16-19, 2018 VALLEY FORGE, PA Oct 16-19, 2017 Dec 11-14, 2017 Mar 5-8, 2018 May 29 - Jun 1, 2018 Aug 27-30, 2018 Oct 29 - Nov 1, 2018 ELECTRICAL SAFETY FOR UTILITIES COURSE DAYS 3.2 CEU $1,335 LECTURE This course provides training for new, multi-craft or experienced electricians, linemen, technicians, engineers, supervisors and safety managers that install, maintain, repair, troubleshoot or work around power generation, transmission and distribution equipment. Informal on-the-job training can be dangerous. To ensure adequate safe work practices are followed, personnel must understand electrical hazards, safety regulations, and the use of safe work procedures, protective equipment and standards. This course meets mandated training requirements of OSHA and.269 and improves ability to interpret OSHA, the National Electrical Safety Code (NESC), ASTM and other applicable electrical safety regulations. Applying these best practices is essential to preventing electrical accidents, outages and equipment damage. Explain the hazards and effects of electricity Interpret and apply hazardous energy control regulations for utilities as required by OSHA Explain installation of temporary grounding for personal protection Utilize safe work practices for work on or around substation equipment, transmission equipment, and overhead lines Use appropriate personal protective equipment for a variety of applications Explain the functions of a substation grounding system COURSE OPTION FOR SUBSTATION MAINTENANCE CERTIFICATION - SEE PAGE 16 20

23 CLEVELAND, OH Jan 22-25, 2018 Jul 30 - Aug 2, 2018 Oct 16-19, 2017 Nov 13-16, 2017 Dec 4-7, 2017 Feb 26 - Mar 1, 2018 Apr 9-12, 2018 Jun 18-21, 2018 Aug 20-23, 2018 Oct 22-25, 2018 Nov 27-30, 2018 Dec 17-20, 2018 FONTANA, CA Jan 8-11, 2018 Jul 9-12, 2018 READING, MA Sep 10-13, 2018 SAN LEANDRO, CA Mar 26-29, 2018 Sep 4-7, 2018 SEYMOUR, CT Mar 19-22, 2018 Aug 13-16, 2018 SUMNER, WA Sep 18-21, 2017 Apr 16-19, 2018 Oct 29 - Nov 1, 2018 VALLEY FORGE, PA Sep 25-28, 2017 Nov 28 - Dec 1, 2017 Feb 12-15, 2018 May 21-24, 2018 Jun 25-28, 2018 Sep 10-13, 2018 Dec 10-13, 2018 ELECTRICAL SAFETY FOR INDUSTRIAL FACILITIES COURSE DAYS 3.2 CEU $1,335 AVAILABLE IN SPANISH LECTURE This course is essential for new, multi-craft or experienced electricians, technicians, engineers, supervisors and safety managers that install, maintain, repair, troubleshoot or work around industrial electrical systems. Participants are trained to understand electrical hazards, electrical safety regulations, and the use of safe work procedures and personal protective equipment (PPE). Students are familiarized with updates to OSHA, NFPA 70E, NEC and PPE improvements. Information is provided to help realize the benefits of an electrical safety program which results in fewer electrical accidents, improved power system reliability, OSHA compliance and potential reductions in losses due to accidents and injuries. It provides critical information to help meet the mandated training requirements of OSHA Explain the hazards and effects of electricity Interpret applicable regulations Perform hazardous energy control for industrial facilities as required by OSHA Outline the installation of temporary grounding for personal protection Select appropriate personal protective equipment for a variety of applications Apply the general requirements of electrical regulations and standards to establish an electrically safe work environment Choose correct grounding methods for protection of personnel and electrical systems COURSE OPTION FOR SUBSTATION MAINTENANCE CERTIFICATION - SEE PAGE 16 21

24 NFPA 70E 2018 IS HERE ALL UPDATES AND CHANGES ARE COVERED IN THIS NEW EDITION NFPA 70E, Standard for Electrical Safety in the Workplace 2018 edition is here. The 11th edition of the standard for 2018 contains many updates, including minor and major revisions, new additions and major reorganizations. The summary of changes listed below does not contain every change and some language is paraphrased because of space limitations. Note: NFPA 70E 2018 final version has not yet been released at this printing and additional changes are possible before its official publication date. Please refer to the final approved full version of the standard to verify all changes and updates once it is made available. The listing below is a partial summary and the final published version should be consulted for verification. NFPA 70E 2018 CHANGE AND UPDATE HIGHLIGHTS: Introduction: 90.4 Organization: Sections deleted and additional information New & Revised Definitions: Electrical Safety Program, Fault Current, Fault Current, Available, Maintenance, Condition of and Working Distance Maintenance, Condition of and Working Distance Article 105 Application Of Safety-Related Work Practices And Procedures: New procedures, responsibilities, words and text is added Article 110 General Requirements for Electrical Safety-Related Work Practices: New sections are added, new LOTO procedures, other text additions and reference changes Article 120 Establishing an Electrically Safe Work Condition: Major section sequence reorganization and additions Article 130 Work Involving Electrical Hazards: Many sections are reorganized and new sections added. There are significant text, terms, informational notes, clarifications, references, additional protective measures and definitions changes 22

25 CLEVELAND, OH Oct 16-17, 2017 Nov 15-16, 2017 Feb 1-2, 2018 Apr 25-26, 2018 Jun 25-26, 2018 Sep 12-13, 2018 Oct 4-5, 2017 Dec 6-7, 2017 Feb 6-7, 2018 Mar 21-22, 2018 May 14-15, 2018 Jun 20-21, 2018 Aug 13-14, 2018 Sep 5-6, 2018 Nov 15-16, 2018 FONTANA, CA Oct 23-24, 2017 Jan 17-18, 2018 Apr 3-4, 2018 Aug 27-28, 2018 Dec 10-11, 2018 READING, MA Oct 23-24, 2017 SAN LEANDRO, CA Sep 18-19, 2017 Dec 18-19, 2017 Feb 13-14, 2018 Jun 18-19, 2018 Oct 29-30, 2018 SEYMOUR, CT Jan 8-9, 2018 Oct 16-17, 2018 SUMNER, WA Jan 9-10, 2018 Apr 4-5, 2018 May 7-8, 2018 Jul 9-10, 2018 Sep 19-20, 2018 Dec 3-4, 2018 VALLEY FORGE, PA Nov 1-2, 2017 Jan 31 - Feb 1, 2018 Mar 26-27, 2018 May 1-2, 2018 Jul 2-3, 2018 Oct 2-3, 2018 Nov 19-20, 2018 NFPA 70E 2018 ELECTRICAL SAFETY Course Days 1.6 CEU $835 LECTURE This two-day course is intended for any personnel who work on or around AC or DC voltages of 50 volts or more, or that are responsible for safety in the workplace. This updated standard contains significant changes when compared to its 2015 version. Changes in the NFPA 70E 2018 edition include: the risk assessment process, a new task based table to clarify selection methods for arc flash PPE, and the electrical safety program requirements for maintenance on electrical equipment. The course covers the requirements for working safely in an electrical environment and assists in meeting the mandated training requirements of OSHA OSHA specifically mandates employer assessment of generally recognized hazards in the workplace and provisions for protecting the employee from those hazards. Students will receive the NFPA 70E 2018 Standard. Identify common factors of electrical accidents Understand the arrangement of the material in the NFPA 70E Explain the hazards of electrical work and their effects on the employee Describe the main elements in an electrical safe work program Identify the requirements for establishing an electrically safe work condition Identify the requirements for a shock and arc flash risk assessment Define approach boundaries for shock protection for qualified/unqualified employees Select personal protective equipment for shock protection Determine safe work practices if an arc flash hazard is present Select personal protective equipment for arc flash protection REQUIRED FOR LOW-VOLTAGE CIRCUIT BREAKER MAINTENANCE CERTIFICATION- SEE PAGE 16 23

26 CLEVELAND, OH Feb 20-23, 2018 Aug 20-23, 2018 Oct 30 - Nov 2, 2017 Jan 16-19, 2018 Jul 16-19, 2018 Dec 3-6, 2018 FONTANA, CA Jun 25-28, 2018 Oct 9-12, 2018 SAN LEANDRO, CA May 29 - Jun 1, 2018 Nov 13-16, 2018 VALLEY FORGE, PA Apr 23-26, 2018 Sep 17-20, 2018 ELECTRICAL SAFETY FOR INSPECTORS LECTURE COURSE DAYS 3.2 CEU $1,335 CERTIFICATION COURSE This course provides up-to-date information on OSHA General Industry, NFPA 70, 70E, 70B and IEEE standards that are relevant to electrical safety in the workplace. Armed with this knowledge, safety managers, human resources (HR) and risk and loss control personnel can implement an effective self-inspection program that helps prevent electrical accidents, OSHA citations and outages caused by accidents. The information provided in this course prepares participants to recognize existing issues within their facility. Explain the hazards and effects of electricity Interpret applicable regulations Establish a preventative maintenance program per, NFPA 70E & 70B Perform hazardous energy control required by OSHA Use safe work practices for work on or around industrial electrical equipment and overhead lines Select correct personal protective equipment (PPE) for a variety of applications Apply the general requirements of electrical regulations and standards to establish an electrically safe work environment List the requirements for industrial facilities with utility or utility-like installations ELECTRICAL SAFETY FOR MINING LECTURE COURSE DAYS 2.8 CEU ON-SITE ONLY This course is intended for new, multi-craft or experienced electricians, technicians, engineers, supervisors and safety managers that install, maintain, repair, troubleshoot or work around low and medium voltage electrical systems in mines. MSHA compliance officers are very active in every mine within the United States. Compliance with MSHA and OSHA electrical safety regulations minimizes the risk of electrical accidents, and reduces losses associated with shutdowns and outages. This course provides up-to-date information that will aid in establishing an effective electrical safety program in mines. Explain the hazards of electricity and their effects Select appropriate personal protective equipment for a variety of applications Utilize safe work practices, both above and below ground, for work on or around metal clad switchgear, substation equipment, motor control centers and batteries Explain installation and testing of permanent and temporary grounding systems for personal protection Identify specific hazards for working with electrical equipment in mines Apply lockout/tagout policy, energized work permits, and overhead line clearances Interpret MSHA and applicable OSHA regulations 24

27 CLEVELAND, OH Jan 8-11, 2018 Jul 23-26, 2018 Oct 23-26, 2017 Dec 11-14, 2017 Mar 12-15, 2018 May 7-10, 2018 Aug 6-9, 2018 Oct 1-4, 2018 FONTANA, CA Oct 30 - Nov 2, 2017 Mar 26-29, 2018 Sep 10-13, 2018 READING, MA Nov 13-16, 2017 SUMNER, WA Jan 22-25, 2018 Jun 4-7, 2018 VALLEY FORGE, PA Nov 28 - Dec 1, 2017 Apr 9-12, 2018 Dec 3-6, 2018 NATIONAL ELECTRICAL CODE 2017 COURSE DAYS 3.2 CEU $1,335 LECTURE This course provides electricians, electrical inspectors and electrical contractors a comprehensive study of Chapters 1 through 4, including a brief overview of Chapter 5 of the 2017 National Electrical Code. Major updates and revisions from previous editions are addressed throughout this course. Class participant will receive a softbound copy of the NEC 2017 standard, and will learn how to apply the Code to properly install electrical circuits and equipment. This course provides a study of the definitions of electrical terms; requirements for electrical installations, such as branch circuits and grounding systems; wiring methods and materials; overcurrent protection, voltage drop, neutral load. It also covers calculations through practical exercises; the method for determining conductor ampacity through practical exercises; and more. The content of the NEC 2017 course also addresses the OSHA 29 CFR mandated requirements for electrical installations. Describe the organization of the 2017 National Electrical Code and its general requirements Explain grounding and bonding requirements Identify and use the various tables Outline the method for determining conductor ampacity Calculate neutral, branch circuit, and feeder loads Summarize how to calculate electrical enclosure and conduit conductor fill Determine acceptable wiring methods Relate the process of sizing motor circuits and required components List the requirements for GFCI use with temporary wiring REQUIRED FOR INDUSTRIAL ELECTRICAL SAFETY INSPECTOR CERTIFICATION - SEE PAGE 16 NATIONAL ELECTRICAL CODE CHANGES 2017 COURSE 227B 2 DAYS 1.6 CEU ON-SITE ONLY LECTURE The National Electrical Code is updated on a three year cycle because of the continuous introduction of new technologies into the marketplace, and the release of new research results by various public and private groups. This course is intended for electricians, electrical inspectors and contractors needing to meet federal, state and local requirements for installing electrical work. Understanding the reason for these updates enables personnel in the electrical field to more readily comprehend and implement new electrical safety rulings for the safe installation of electrical systems and equipment. Major revisions are explained in the 2017 edition and the substantiation for those changes is addressed. Identify the major changes in the National Electrical Code from 2014 to 2017 Outline the format indicating where changes have been made Describe substantiations for these changes Summarize the technical impact of changes EVERYONE WAS EXTREMELY FRIENDLY AND HELPFUL. MY INSTRUCTOR WAS VERY KNOWLEDGEABLE AND ANSWERED QUESTIONS, OUTSIDE THE SCOPE OF THE CLASS. MICHAEL - TRANSOCEAN 25

28 OSHA GENERATION, TRANSMISSION & DISTRIBUTION COURSE DAYS 1.6 CEU ON-SITE ONLY LECTURE This course is intended for personnel that work on or around power generation, transmission and distribution equipment operating at 600 volts or more. It s designed to familiarize participants with the latest Final Rule for Electric Power Generation and Distribution. OSHA s electrical standards are designed to protect employees exposed to dangers such as electric shock, electrocution, fires, and explosions. As one of OSHA s Fatal Four, electrical hazards cause hundreds of deaths and thousands of injuries in the workplace every year. OSHA requires training for all employees that perform work which could put them at risk from electrical hazards. Explain the hazards and effects of electricity State the source of electrical regulations and standards Describe training requirements for qualified workers, working on or near generation, transmission and distribution types of construction Outline work on electrical power installations and equipment requirements Explain the OSHA requirements for first aid, CPR, and emergency rescue Summarize the hazardous energy control requirements of (d) and (m) OSHA ELECTRICAL SAFETY-RELATED WORK PRACTICES COURSE DAYS 1.6 CEU AVAILABLE IN SPANISH ON-SITE ONLY LECTURE This course is intended for any construction, industrial or commercial personnel that work on or around electrical equipment operating at 50 volts or more. It assists in meeting the OSHA mandated training requirements of 29 CFR for qualified and unqualified personnel. This course focuses on OSHA s electrical standards, which are written to protect employees exposed to dangers such as electric shock, arc flash, and explosions. Electrical hazards are among the four leading cause of workplace injuries and they are disproportionately fatal and costly. Explain the hazards and effects of electricity Interpret applicable regulations Perform hazardous energy control for industrial facilities as required by OSHA Use safe work practices for work on or around industrial electrical equipment and overhead lines Select appropriate personal protective equipment for a variety of applications Apply the general requirements of electrical regulations and standards to establish an electrically safe work environment OPTION FOR LOW-VOLTAGE CIRCUIT BREAKER MAINTENANCE CERTIFICATION - SEE PAGE 16 EXCELLENT INSTRUCTOR WITH GOOD KNOWLEDGE OF THE SUBJECT. BROUGHT PERSONAL EXPERIENCE AND EXAMPLES TO EMPHASIZE HIS POINTS. KENT - SHELL OIL 26 26

29 SUMNER, WA Mar 26-27, 2018 Sep 17-18, 2018 MARITIME ELECTRICAL SAFETY COURSE DAYS 1.6 CEU $835 LECTURE This course is intended for maritime personnel who work on or around electrical equipment and systems rated 50 volts to ground or more in vessels, shipyards, ship breaking, and similar activities where personnel are, or may be, exposed to electrical hazards. Electrical safety compliance for maritime workers is comprised of various regulations and standards with overlapping jurisdictions and requires a thorough understanding of applicable regulations and standards that are identified in the 2006 OSHA Shipyard Employment Tool Bag Directive (CPL ), which clarifies the importance of electrical safety for all maritime workers. Explain safe work practices for working on or near electrical equipment/systems Outline the purpose and elements of performing electrical risk assessment Describe safe work practices for performing hazardous energy control procedures Identify which General Industry Regulations and Electrical Safety Standards apply to the Maritime Industry under OSHA

30 SUMNER, WA Apr 2-3, 2018 Oct 10-11, 2018 ELECTRICAL SAFETY FOR OVERHEAD CONTACT SYSTEMS COURSE DAYS 1.6 CEU $835 LECTURE This two-day course is intended for new, multi-craft or experienced electricians, technicians, engineers, and supervisors that install, maintain, repair, troubleshoot or work around OCS. Technicians that maintain the overhead lines and equipment are taught the unique safety hazards involved with OCS installations. An effective electrical safety training program can ensure OSHA compliance and minimize the risk of electrical accidents during energized or de-energized work. This course meets the mandated training requirements of OSHA and.269. Explain the hazards and effects of electricity Interpret applicable OSHA regulations Use safe work practices for work on or around industrial electrical equipment and overhead lines Select appropriate personal protective equipment for a variety of applications Apply the requirements of electrical regulations and standards to establish a electrically safe work environment Apply lockout/tagout procedures, energized work permits and overhead line clearances Interpret applicable OSHA regulations ENERGIZED OVERHEAD CONTACT (OCS) LINE SAFETY HANDS-ON COURSE DAYS 8 CEU ON-SITE ONLY This comprehensive 10-day program is designed to assist in meeting the requirements for Qualified Workers involved in maintaining energized overhead contact systems (OCS). Participants will learn the safe work practices required when working on or near energized overhead contact systems. Maintenance technicians learn special precautionary techniques and the proper use of personal protective equipment, such as rubber gloves, blankets and line hoses, insulated tools and other protective measures to reduce the hazard of electric shock. Arc flash protection is also covered in detail. Outline the three hazards of electricity, their effects on the employee and how to avoid them Identify requirements to work safely on or near energized overhead contact systems Care and use of electrical protective equipment appropriately Apply protective grounds properly Utilize appropriate techniques when using insulated equipment 28

31 Oct 23-27, 2017 May 21-25, 2018 Nov 27 - Dec 1, 2017 Jul 30 - Aug 3, 2018 Jan 29 - Feb 2, 2018 Sep 17-21, 2018 Feb 19-23, 2018 Oct 29 - Nov 2, 2018 Apr 16-20, 2018 CABLE TESTING & DIAGNOSTICS, MEDIUM-VOLTAGE COURSE DAYS 3.6 CEU $2,010 CERTIFICATION COURSE HANDS-ON This comprehensive hands-on preventative maintenance course is intended for engineers, electrical technicians, and supervisors that test, install, maintain, repair or troubleshoot 5-35 kv solid dielectric and paper insulated power cables. Students will perform and analyze results of insulation resistance tests (DAR & PI) and Type I withstand tests (DC, AC, & VLF). Also, diagnostic tests such as Partial Discharge and Tan Delta will be performed. Cable diagnosis is predictive, often performed as part of a condition based maintenance strategy. This course focuses on data collection to provide information about the overall cable condition. Students will learn the indicators that cable performance is deteriorating, understand the signs that a cable is about to fail and when to perform maintenance. Identify medium voltage cable components and causes of failure Utilize safe work practices for cable testing per OSHA and industry standards Interpret current industry cable testing standards and procedures Perform and analyze results of Insulation Resistance Tests (DAR & PI) Perform and analyze results of Type I Withstand Tests (DC, AC & VLF) Perform and analyze results of Type II Diagnostic Field Tests (Tan Delta & PD) Outline the benefits of an established Conditioned Based Cable Maintenance Program OUR INSTRUCTOR S EXPERIENCE AND SUBJECT KNOWLEDGE MADE THE COURSE MATERIAL EASY TO UNDERSTAND AND REMEMBER. EXCELLENT CLASS. KARL - PORTSMOUTH NAVAL SHIPYARD 29

32 Oct May 7-11, 2018 Nov Jun 4-8, 2018 Dec 11-15, 2017 Aug 20-24, 2018 Feb 5-9, 2018 Sep 24-28, 2018 Apr 2-6, 2018 Dec 3-7, 2018 SUMNER, CA Sep 25-29, 2017 Jul 23-27, 2018 Feb 12-16, 2018 SAN LEANDRO, CA Jan 8-12, 2018 Jul 9-13, 2018 Apr 23-27, 2018 Oct 1-5, 2018 VALLEY FORGE, PA Oct 30 - Nov 3, 2017 May 21-25, 2018 Dec 4-8, 2017 Aug 6-10, 2018 Mar 5-9, 2018 Nov 5-9, 2018 CABLE SPLICING & TERMINATING, MEDIUM-VOLTAGE HANDS-ON COURSE DAYS 3.6 CEU $1,925 PLUS $885 MATERIALS CERTIFICATION COURSE This course provides instruction on the proper installation of cable splices and terminations. New or experienced electricians and technicians that install, maintain, repair or troubleshoot 5-35 kv solid dielectric power cables will benefit from this course. Properly trained and skilled craftsmen, who install and test the cable correctly, can drastically improve the life expectancy of cables. According to IEEE Std , Table 10.33, inadequate installation and testing prior to start-up of cable splices and terminations are the primary causes of failure. Yet, over the last few decades, cable splicing and testing as a profession has declined. Multi-crafting and departmental mergers have made it just one task among many. Explain medium voltage cable components and construction Identify applications of different cable types including marine, offshore, mining, underground (URD) and tech Prepare cable for splicing utilizing hand tools, abrasives and solvents Install taped, molded heat shrink splices on tape-shielded and jacketed concentric (JCN) cables Install taped, cold shrink, heat shrink and molded elbow terminations Identify the causes of splice and termination failures Explain the procedures for buried, duct and tray installation and the relevant OSHA safety requirements 30

33 Oct 16-20, 2017 May 14-18, 2018 Nov 13-17, 2017 Jul 23-27, 2018 Dec 18-22, 2017 Aug 27-31, 2018 Feb 12-16, 2018 Oct 1-5, 2018 Apr 9-13, 2018 Dec 10-14, 2018 CABLE FAULT LOCATION & TRACING, MEDIUM-VOLTAGE COURSE DAYS 3.6 CEU $1,730 CERTIFICATION COURSE HANDS-ON This hands-on course is intended for new or experienced electricians and technicians that install, maintain, repair or troubleshoot 5-35 kv solid dielectric power cables. Medium voltage cable systems are the backbone of electrical systems worldwide, yet they are often the most ignored part of the power system until there is a failure. One of the most important aspects of medium voltage cable maintenance is fault location. Cable systems today have higher failure rates than ever before, due to aging, environmental stresses and improper installation. The ability to efficiently locate faults, greatly reduces downtime and outage costs. Identify medium voltage cable components and causes of failure Utilize safe work practices for cable testing per OSHA and industry standards Trace cable installations with modern cable route tracing equipment Locate secondary faults using earth gradient (sheath fault) technologies Pinpoint faults using magnetic and acoustical tracing system and arc reflection technologies Apply a proven fault locating process; test, analyze and locate faults in a comprehensive cable field lab environment REQUIRED COURSE FOR MEDIUM-VOLTAGE CABLE CERTIFICATION - SEE PAGE 16 DFW, TX Sep 25-29, 2017 May 7-11, 2018 Nov 13-17, 2017 Jul 23-27, 2018 Jan 8-12, 2018 Sep 17-21, 2018 Mar 5-9, 2018 Nov 26-30, 2018 CERTIFIED FIBER OPTIC TECHNICIAN - FOA HANDS-ON COURSE 404C 4.5 DAYS 3.6 CEU $2,055 FOA CERTIFICATION COURSE In this course, students will learn how to understand the limitations of bending, effects of temperature, effectively splice and connectorize fiber optics, troubleshoot a system and confirm the quality of connections and splices. All these skills are necessary to properly install and repair fiber optic systems. Participants completing the course exercises and lab requirements will be given the Fiber Optic Association (FOA) exam for Certified Fiber Optic Technicians. This exam is proctored by a certified FOA instructor and participant must score the minimum (70%) to meet the FOA certification requirements. Identify and specify components for a fiber optic system Determine the appropriate fiber for different applications, install fiber optic cable and test for EIA/TIA acceptable losses Utilize fiber optic test equipment, including an optical time domain reflectometer (OTDR), light source and power meter Install and test mechanical and fusion splices to EIA/TIA standards Identify damage to cables and the associated causes, also budget for losses in fiber optic systems Utilize attenuators to adjust power levels (DBM) at the receiver I WILL DEFINITELY RECOMMEND TO MY COMPANY FOR AVO TRAINING TO COME AND TRAIN OUR TECHNICIANS. THANKS FOR GOING ABOVE AND BEYOND. JOHN - SQUARE D 31 31

34 PROTECTIVE RELAY CLEVELAND, OH Apr 2-6, 2018 Sep 17-21, 2018 Sep 25-29, 2017 Oct 9-13, 2017 Nov 6-10, 2017 Jan 8-12, 2018 Feb 12-16, 2018 Mar 5-9, 2018 Apr 2-6, 2018 May 7-11, 2018 Jun 18-22, 2018 Jul 9-13, 2018 Aug 6-10, 2018 Sep 10-14, 2018 Oct 15-19, 2018 Nov 5-9, 2018 Dec 3-7, 2018 FONTANA, CA Oct 2-6, 2017 Jan 29 - Feb 2, 2018 Apr 30 - May 4, 2018 Aug 6-10, 2018 Dec 3-7, 2018 READING, MA Oct 29 - Nov 2, 2018 SAN LEANDRO, CA Oct 23-27, 2017 Dec 4-8, 2017 Mar 12-16, 2018 Jul 16-20, 2018 Oct 15-19, 2018 SEYMOUR, CT Sep 18-22, 2017 Jan 22-26, 2018 May 14-18, 2018 SUMNER, WA Dec 4-8, 2017 Mar 5-9, 2018 Jun 11-15, 2018 Nov 26-30, 2018 VALLEY FORGE, PA Sep 18-22, 2017 Nov 13-17, 2017 Dec 11-15, 2017 Feb 12-16, 2018 Apr 23-27, 2018 Jun 4-8, 2018 Aug 20-24, 2018 Oct 1-5, 2018 PROTECTIVE RELAY MAINTENANCE, BASIC HANDS-ON COURSE DAYS 3.6 CEU $1,925 CERTIFICATION COURSE AVAILABLE IN SPANISH The relay distribution oriented course is an intensive, lab oriented presentation. The participant will learn the basics of distribution protection combined with hands-on, realistic training on actual relays. Laboratory exercises will cover proper relay maintenance, specific test procedures, and detailed adjustment and calibration procedures utilizing state of the art relay test sets. Class participants will understand applicable NETA testing standards, what test result information should be recorded and the hand tools necessary for proper adjustment and calibration. Outline how the relay is applied in the power system and identify critical components Practice utilizing manufacturer s instruction literature to correctly interpret internal and external AC and DC relay schemes Perform specified tests on, and calibrate the following relays to manufacturer s specifications (ANSI device number): Instantaneous and Time Overcurrent (50/51) Directional/Controlled Overcurrent (67) Bus Differential (87B) Transformer Percentage Differential with Harmonic Restraint (87T) Targets and Indicators 32

35 CLEVELAND, OH Apr 9-13, 2018 Sep 24-28, 2018 Oct 2-6, 2017 Nov 27 - Dec 1, 2017 Jan 15-19, 2018 Mar 12-16, 2018 Jun 25-29, 2018 Jul 16-20, 2018 Sep 17-21, 2018 Nov 12-16, 2018 FONTANA, CA Oct 9-13, 2017 Feb 5-9, 2018 May 7-11, 2018 Aug 13-17, 2018 Dec 10-14, 2018 READING, MA Jun 4-8, 2018 SAN LEANDRO, CA Oct 30 - Nov 3, 2017 Dec 11-15, 2017 Mar 19-23, 2018 Jul 23-27, 2018 Oct 22-26, 2018 SEYMOUR, CT Oct 23-27, 2017 May 21-25, 2018 Nov 26-30, 2018 SUMNER, WA Nov 13-17, 2017 Dec 18-22, 2017 Jun 18-22, 2018 VALLEY FORGE, PA Sep 25-29, 2017 Feb 19-23, 2018 May 14-18, 2018 Aug 27-31, 2018 Oct 8-12, 2018 PROTECTIVE RELAY MAINTENANCE, ADVANCED HANDS-ON COURSE DAYS 3.6 CEU $1,925 CERTIFICATION COURSE Course participants learn the basics of transmission line protection combined with hands-on, realistic training on actual relays. Laboratory exercises will cover proper relay maintenance, specific test procedures including proper calculations for impedance relay testing, and detailed adjustment and calibration procedures utilizing state of the art relay test sets. Participants will understand applicable NETA testing standards, what test result information should be recorded, and what hand tools are necessary for proper adjustment and calibration. Outline how the relay is applied in the power system and identify critical components Interpret AC and DC relay schemes Perform as found/left tests and calibrate the following relays (ANSI device numbers): Distance (21) Sync Check (25) Directional Overcurrent (67/67G) Transformer Percentage Differential (87T) Targets and Indicator Utilize a relay test set to perform direct injection testing and evaluate results 33

36 CLEVELAND, OH Apr 16-20, 2018 Oct 1-5, 2018 Dec 11-15, 2017 Feb 5-9, 2018 Jun 4-8, 2018 Aug 27-31, 2018 READING, MA Sep 18-22, 2017 Apr 30 - May 4, 2018 SAN LEANDRO, CA Oct 16-20, 2017 Mar 5-9, 2018 Nov 5-9, 2018 SUMNER, WA Nov 27 - Dec 1, 2017 PROTECTIVE RELAY MAINTENANCE, SOLID STATE HANDS-ON COURSE DAYS 3.6 CEU $1,925 CERTIFICATION COURSE This intensive hands-on course is designed specifically for test technicians responsible for the setting, testing, and calibration of solid-state protective relays. The somewhat specialized testing procedures used to test and calibrate these relays will be fully addressed through valuable theoretical operating explanations and rigorous lab exercises. Realistic training on actual relays with laboratory exercises will cover proper relay maintenance, specific test procedures, and detailed adjustment and calibration procedures utilizing state of the art relay test sets. Participants will understand applicable NETA testing standards, what test result information should be recorded, and what hand tools are necessary for proper adjustment and calibration. Outline how the relay is applied in the power system and identify critical components Interpret internal and external AC and DC schematics Connect a relay test set to the relay for testing purposes, perform the field tests and calibrate as necessary Interpret test results and take corrective action if necessary Fill out test forms and keep proper records This course is an intensive, hands-on, lab oriented class covering: Sync Check Relay (25) Voltage Relays (27/59) Directional Power (32R) Overcurrent (50/51) Directional Overcurrent (67) Transformer Differential (87T) Oct 30 - Nov 3, 2017 Jan 29 - Feb 2, 2018 May 14-18, 2018 Aug 20-24, 2018 Dec 10-14, 2018 SUMNER, WA Dec 11-15, 2017 Jun 25-29, 2018 FONTANA, CA Sep 25-29, 2017 SAN LEANDRO, CA Feb 26 - Mar 2, 2018 PROTECTIVE RELAY MAINTENANCE, GENERATION HANDS-ON COURSE DAYS 3.6 CEU $1,925 CERTIFICATION COURSE Participants will learn the basics of generator protection combined with hands-on training using actual relays. Laboratory exercises will cover proper relay maintenance, specific test procedures, and detailed adjustment and calibration procedures utilizing state of the art relay test sets. Participants learn the applicable NETA testing standards, what test result information should be recorded, and what hand tools are necessary for proper adjustment and calibration. This course provides the understanding of generator protective zones and their associated protective relays. Outline how the relay is applied in the power system and identify critical components Interpret internal and external AC and DC schematics Identify relay settings and calculate test parameters based on the settings Properly record and evaluate test results Connect a relay test set to the relay for testing purposes, perform the field tests and calibrate as necessary Fill out test forms and keep proper records This course is an intensive, hands-on, lab oriented class covering: Voltage controlled and voltage restrained overcurrent (27/51) Reverse Power (32) Loss of Field or Loss of Excitation (40) Negative Sequence (46) Generator Differential (87G) 34

37 CLEVELAND, OH Feb 26 - Mar 2, 2018 Jun 11-15, 2018 Nov 13-17, 2017 Jan 22-26, 2018 Mar 19-23, 2018 May 21-25, 2018 Jul 23-27, 2018 Oct 1-5, 2018 Nov 26-30, 2018 FONTANA, CA Dec 4-8, 2017 READING, MA Oct 16-20, 2017 Nov 5-9, 2018 SAN LEANDRO, CA Apr 9-13, 2018 Sep 17-21, 2018 SUMNER, WA Feb 5-9, 2018 Aug 20-24, 2018 VALLEY FORGE, PA Oct 2-6, 2017 Jan 8-12, 2018 Apr 30 - May 4, 2018 Jul 9-13, 2018 Oct 22-26, 2018 MICROPROCESSOR-BASED RELAY TESTING, DISTRIBUTION/FEEDER COURSE DAYS 3.6 CEU $2,075 Microprocessor-based relays are now an integral part of many power distribution systems. This hands-on course is designed for test technicians and other persons involved in setting, testing, and diagnosing microprocessor-based relays that protect distribution feeders and buses. Outline how the relay is applied in the power system and identify critical components Interpret external wiring connection and internal schematic diagram Determine equipment and software necessary to communicate with relays, and the communication parameters Connect a relay test set to the relay for testing purposes, perform the field tests and calibrate as necessary Perform the following relay element tests and interpret the results Instantaneous and Time Overcurrent Positive Sequence (50/51P) Residual (50/51N) Zero Sequence (50/51G) Negative Sequence (50/51Q) Under and Overvoltage (27/59) Frequency (81) HANDS-ON Transformer Differential Elements (87) Note: Visit for a detailed list of equipment needed for this course. Administrative rights to install software must be granted for successful course completion. Relays used in lab exercise will be, SEL 751A, SEL 787, GE UR T60, GE SR 750, ABB REF and 615, ABB RET

38 Feb 19-23, 2018 FONTANA, CA Oct 23-27, 2017 ADVANCED VISUAL TESTING SOFTWARE COURSE DAYS 3.6 CEU $1,975 HANDS-ON Apr 16-20, 2018 Aug 13-17, 2018 Oct 22-26, 2018 AVTS is an automatic relay testing software interface that enables operation of Megger relay test sets using a computer rather than operating the test set manually. This software allows the field technician to select test modules from a user created Microsoft database and automatically test mechanical, solid-state, and microprocessor based relays. Students receive an upgrade to the current version of AVTS and Megger s complete library of relay test modules. Students are instructed to setup communications with the relay test set, find the desired relays to be tested, and execute individual or group tests. Methods of modifying tests to meet individual needs will be taught and applied in hands-on labs. Database management and test report organization and usage are addressed as well. Note: Participants must bring a laptop that has Windows XP/Windows 10/Vista/7/8, 600+ MHz processor, 4+GB hard drive space, 1+GB RAM, a CD-ROM drive. ipads and tablets without CD-ROM or USB ports are not acceptable. Administrative rights to install AVTS software must be granted for successful course completion. Setup software and hardware for test set communications Configure a new AVTS database Import test modules Modify modules for specific relays Use tools and editors to enhance testing Test electromechanical and microprocessor relays Analyze test results for trending and prioritizing repairs 36

39 Sep 18-22, 2017 Dec 18-22, 2017 Feb 26 - Mar 2, 2018 Jul 30 - Aug 3, 2018 Oct 29 - Nov 2, 2018 FONTANA, CA Oct 16-20, 2017 SAN LEANDRO, CA Nov 6-10, 2017 Apr 2-6, 2018 Sep 10-14, 2018 SUMNER, WA Jan 29 - Feb 2, 2018 Aug 13-17, 2018 VALLEY FORGE, PA May 7-11, 2018 Oct 15-19, 2018 MICROPROCESSOR-BASED RELAY TESTING, GENERATION COURSE DAYS 3.6 CEU $2,075 HANDS-ON This hands-on course is designed for test technicians and other persons involved in setting, testing and diagnosing microprocessor-based relays that protect generators, generator buses and transformers. NETA and NFPA 70B maintenance and testing standards recommend testing relays either every two years or at other regular intervals based on equipment condition and reliability requirements. Outline how the relay is applied in the power system and identify critical components Determine relay baud rate and other communication parameters Determine equipment and software necessary to communicate with relays Connect relay test equipment to the relay terminals by using connection diagrams and system schematics List the relay protective elements and how they work Determine what metering and test functions to perform Read, save and evaluate relay setting, and event records Perform the following relay element tests and interpret the results Backup Impedance (21) Over excitation (24) Reverse Power (32) Loss of Excitation (40) Negative Sequence (46) Voltage Controlled Overcurrent (51C) Voltage Restrained Overcurrent (51V) Under/Overvoltage (27/59) Stator Ground (64) Frequency (81) Generator Differential Elements (87) Send original settings to relay after testing Note: Visit for a detailed list of equipment needed for this course. Administrative rights to install software must be granted for successful course completion. Relays used in lab exercise will be, Beckwith M3425A, SEL 300G and GE SR 489. I WAS ABLE TO LEAVE CLASS WITH A MORE THOROUGH UNDERSTANDING. I DON T THINK IT IS POSSIBLE TO HAVE A BETTER RELAY MAINTENANCE CLASS. KERRY - LUMINANT 37

40 CIRCUIT BREAKER Nov 6-9, 2017 Aug 6-9, 2018 CIRCUIT BREAKER MAINTENANCE - SF6 COURSE DAYS 3.2 CEU $1,730 HANDS-ON Jan 15-18, 2018 Apr 30 - May 3, 2018 Oct 9-12, 2018 This hands-on course is intended for new or experienced electricians and technicians that install, maintain, repair or troubleshoot SF6 circuit breakers rated at 1.2 kv and higher. It also covers all elements of routine SF6 circuit breaker maintenance plus inspections. A balance of lecture and hands-on activities are utilized to emphasize operating characteristics and maintenance and testing requirements. Instruction includes the hazards involved in working with SF6 gas as well as the important differences between SF6 circuit breakers compared to conventional insulating mediums. Describe the safety hazards involved in working with SF6 gas Explain the procedure for adding gas to an SF6 circuit breaker Summarize the electrical and mechanical operating principles of an SF6 puffer circuit breaker Perform circuit breaker inspection, per manufacturer s technical manual Perform and evaluate electrical and mechanical tests required by manufacturer Interpret an electrical schematic for an SF6 puffer circuit breaker 38

41 CLEVELAND, OH Jan 16-19, 2018 SAN LEANDRO, CA Sep 18-21, 2017 CIRCUIT BREAKER MAINTENANCE, MEDIUM-VOLTAGE COURSE DAYS 2.8 CEU $1,625 HANDS-ON Jul 16-19, 2018 Oct 23-26, 2017 Feb 12-15, 2018 Mar 26-29, 2018 Jun 11-14, 2018 Aug 13-16, 2018 Oct 15-18, 2018 Nov 27-30, 2018 FONTANA, CA Dec 11-14, 2017 Jun 18-21, 2018 Feb 20-23, 2018 Oct 9-12, 2018 SEYMOUR, CT Feb 26 - Mar 1, 2018 Apr 23-26, 2018 SUMNER, WA Apr 9-12, 2018 Nov 5-8, 2018 VALLEY FORGE, PA Mar 19-22, 2018 May 29 - Jun 1, 2018 Sep 10-13, 2018 This hands-on course is intended for new or experienced electricians and technicians that install, maintain, repair or troubleshoot air and vacm metal-clad circuit breakers and switchgear, rated at 1 kv and higher. This course provides training for the performance of visual, mechanical and electrical inspections, in accordance with manufacturers and NETA MTS requirements. Technicians have more components to test and maintain to ensure a 3 to 5 cycle operating time. Failure of one of these circuit breakers can cause catastrophic damage to other equipment and can be extremely hazardous to nearby personnel. In addition to improving electrical system reliability, well maintained circuit breakers also minimize the arc flash hazard energy levels that technicians can be exposed to during a fault. Identify components and insulation mediums for all circuit breakers Utilize appropriate personal protective equipment and safe work procedures including lockout/tagout (LOTO) Evaluate breaker ratings for various applications Interpret control schematics Explain removal and restoration procedures Adjust linkages, switches and contacts Perform circuit breaker maintenance service according to manufacturer and NETA MTS specifications Carry out and evaluate the results of contact resistance, insulation resistance, leakage current, power factor, and bottle integrity tests 39 39

42 CLEVELAND, OH Nov 6-10, 2017 SAN LEANDRO, CA Apr 16-20, 2018 CIRCUIT BREAKER MAINTENANCE, LOW-VOLTAGE COURSE DAYS 3.6 CEU $1,910 HANDS-ON May 14-18, 2018 Oct 15-19, 2018 Nov 27 - Dec 1, 2017 Jan 8-12, 2018 Mar 5-9, 2018 Apr 23-27, 2018 Jun 25-29, 2018 Sep 10-14, 2018 Nov 5-9, 2018 FONTANA, CA Oct 2-6, 2017 Mar 19-23, 2018 Jun 11-15, 2018 Nov 26-30, 2018 Sep 24-28, 2018 SEYMOUR, CT Dec 11-15, 2017 Jul 9-13, 2018 SUMNER, WA Oct 16-20, 2017 Feb 26 - Mar 2, 2018 Aug 6-10, 2018 Oct 1-5, 2018 VALLEY FORGE, PA Oct 23-27, 2017 Jan 22-26, 2018 May 7-11, 2018 Jul 23-27, 2018 Aug 20-24, 2018 Participants in this class will visually and electrically inspect circuit breakers according to manufacturer and NETA MTS requirements. This hands-on course is intended for new or experienced electricians and technicians that install, maintain, repair or troubleshoot power circuit breakers, rated less than 1,000 VAC, equipped with electromechanical or solid state tripping devices. Based on results of the tests, technicians will be able to make pass/fail decisions on circuit breakers, to improve electrical system reliability. Describe the types of circuit breakers, their components, and functions. Perform circuit breaker and cabinet maintenance service in a safe and successful manner Practice all standard tests performed on a circuit breaker REQUIRED FOR LOW-VOLTAGE CIRCUIT BREAKER CERTIFICATION - SEE PAGE 16 GREAT CLASS AND INSTRUCTOR WITH A LOT OF KNOWLEDGE. I ENJOYED THE HANDS- ON LABS AND GAINED A LOT OF KNOWLEDGE TO USE IN THE NEAR FUTURE. CAMERON - PROCTER & GAMBLE 40

43 CLEVELAND, OH Apr 23-24, 2018 Sep 10-11, 2018 Oct 2-3, 2017 Dec 4-5, 2017 Mar 19-20, 2018 Jun 18-19, 2018 Nov 13-14, 2018 VALLEY FORGE, PA Jan 29-30, 2018 Jul 16-17, 2018 CIRCUIT BREAKER MAINTENANCE, MOLDED & INSULATED CASE COURSE DAYS 1.6 CEU $935 HANDS-ON Molded and insulated case circuit breakers are designed to be disassembled, inspected, adjusted and cleaned, and require testing and maintenance to ensure system reliability. This hands-on course is intended for new or experienced electricians and technicians that install, maintain, repair or troubleshoot molded or insulated case circuit breakers, rated less than 1 kv, equipped with thermal, magnetic or solid state tripping devices. Participants in this course will be required to perform visual and electrical inspections on the circuit breakers and their auxiliary devices. Identify typical molded and insulated case circuit breaker components Utilize appropriate PPE and safe work procedures for breaker maintenance Interpret and utilize NEMA breaker maintenance procedures Carry out complete circuit breaker maintenance, removal and restoration procedures Perform and evaluate the results of low resistance, insulation resistance and overcurrent tests Verify trip device operation and operation of accessories REQUIRED FOR LOW-VOLTAGE CIRCUIT BREAKER CERTIFICATION - SEE PAGE 16 41

44 TMT MOTORS & CONTROLS 42 MOTOR CONTROLS & STARTERS, LOW-VOLTAGE HANDS-ON COURSE DAYS 3.6 CEU $1,675 This course is intended for technicians that install, maintain, repair or troubleshoot MCC s rated 600 volts or less. Students learn effective maintenance and troubleshooting techniques that will enable the correct operation of control scheme, reduce repair time and identifying problems in control circuits. Students learn to design basic ladder diagrams for motor control circuits then wire up the circuits on simulators. Describe the application of motor control pilot devices Interpret MCC wiring diagrams and schematics Describe control circuit types and show the application of two-wire control, three-wire control, reversing circuits, sequence control, jogging and inching circuits Describe the methods of deceleration, reduced-voltage controls, speed controls, and operating principles of variable frequency drives Troubleshoot motor control circuits with a multi-meter Design and wire various motor control circuits Sep 25-29, 2017 Nov 13-17, 2017 Jan 8-12, 2018 Mar 12-16, 2018 May 7-11, 2018 Jul 9-13, 2018 Sep 24-28, 2018 Dec 3-7, 2018 SEYMOUR, CT Oct 30 - Nov 3, 2017 Feb 12-16, 2018 Oct 29 - Nov 2, 2018 VALLEY FORGE, PA Oct 9-13, 2017 MOTOR MAINTENANCE & TESTING HANDS-ON COURSE DAYS 3.2 CEU $1,455 This hands-on course demonstrates how to quickly recognize, diagnose and solve an evolving motor problem preventing catastrophic failures. When troubleshooting motors, technicians should perform electrical tests on insulation before mechanical inspections, because of the lower time investment. This course provides information to enable class participants to establish effective motor maintenance programs. Identify fundamentals of AC and DC motor construction Interpret nameplate data and NEMA design codes Explain installation, starting/stopping methods and maintenance of single-phase and three-phase synchronous, squirrel-cage (induction), and wound-rotor motors Identify appropriate configurations of motor protection & control circuits Perform and evaluate motor rotation, insulation and surge tests Sep 18-21, 2017 Mar 26-29, 2018 Sep 17-20, 2018 VALLEY FORGE, PA Dec 11-14, 2017 Jun 4-7, 2018

45 CLEVELAND, OH Feb 12-16, 2018 Aug 6-10, 2018 Dec 11-15, 2017 Jun 4-8, 2018 FONTANA, CA Nov 13-17, 2017 SUMNER, WA Apr 23-27, 2018 Oct 22-26, 2018 PROGRAMMABLE LOGIC CONTROLLERS MAINTENANCE & TROUBLESHOOTING COURSE DAYS 3.6 CEU $1,755 HANDS-ON This course is designed to provide the participant with basic information of programmable logic controllers (PLC), as well as maintenance and troubleshooting techniques necessary to keep equipment on-line. It is recommended that participants have a good understanding of relay logic and print reading and have attended our Basic Electrical Troubleshooting (BET) and our Motor Controls and Starters, Low Voltage (MCSLV) courses prior to attending. Explain PLC s and how peripheral devices are connected to the PLC Interpret hard wiring diagrams connection to input/output (IO) modules Demonstrate PLC ladder logic and scan cycle Use software instructions for programming techniques Modify existing logic including timers, counters, etc. Perform actual wiring of peripheral IO devices to their related modules Establish communications with PLC using RSLinx Troubleshoot software and hardware PRESENTATION AND LECTURE PROVIDED REAL WORLD EXAMPLES AND SCENARIOS. THE CLASS MADE ME CONFIDENT IN IDENTIFYING HAZARDS ON THE JOB. BRIAN _ ERVIN CABLE 43

46 SUBSTATION COURSES CLEVELAND, OH Apr 30 - May 4, 2018 Oct 22-26, 2018 Oct 2-6, 2017 Oct 16-20, 2017 Nov 6-10, 2017 Dec 4-8, 2017 Dec 11-15, 2017 Jan 8-12, 2018 Feb 5-9, 2018 Feb 19-23, 2018 Mar 5-9, 2018 Mar 19-23, 2018 Apr 9-13, 2018 May 7-11, 2018 Jun 4-8, 2018 Jun 18-22, 2018 Jul 9-13, 2018 Aug 6-10, 2018 Aug 20-24, 2018 Sep 10-14, 2018 Oct 1-5, 2018 Oct 8-12, 2018 Nov 5-9, 2018 Dec 3-7, 2018 Dec 17-21, 2018 FONTANA, CA Oct 23-27, 2017 Feb 26 - Mar 2, 2018 May 14-18, 2018 Jul 16-20, 2018 Sep 24-28, 2018 SAN LEANDRO, CA Sep 25-29, 2017 Jan 22-26, 2018 Apr 30 - May 4, 2018 Jul 30 - Aug 3, 2018 Nov 26-30, 2018 SUMNER, WA Mar 19-23, 2018 Sep 10-14, 2018 VALLEY FORGE, PA Nov 6-10, 2017 Dec 4-8, 2017 Jan 29 - Feb 2, 2018 Apr 2-6, 2018 May 14-18, 2018 Jun 11-15, 2018 Aug 13-17, 2018 Oct 1-5, 2018 Nov 26-30, 2018 SUBSTATION MAINTENANCE I HANDS-ON COURSE DAYS 3.6 CEU $1,975 AVAILABLE IN SPANISH This course provides an overview for apprentices, technicians and engineers responsible for the maintenance and testing of industrial and utility substations. Hands-on labs are a major part of this course to help the technician locate weak or faulty components in the substation systems. Course focus is on medium voltage circuit breakers (air and vacm), and switchgear. The course is designed to aid skilled qualified substation maintenance technicians in the safe performance of substation component preventative maintenance. Explain the configuration and function of common equipment found in a substation Identify components of air, oil and vacm circuit breakers, and metal-clad switchgear (including switchyard equipment) Use medium-voltage circuit breaker and switchgear manufacturer s instruction manuals and NETA specifications to: Perform all required tests Verify measurements and make adjustments to mechanisms as required REQUIRED FOR SUBSTATION MAINTENANCE CERTIFICATION - SEE PAGE 16 44

47 Sep 18-22, 2017 Oct 9-13, 2017 Nov 13-17, 2017 Dec 18-22, 2017 Jan 15-19, 2018 Feb 12-16, 2018 Mar 12-16, 2018 Apr 2-6, 2018 Apr 16-20, 2018 May 14-18, 2018 Jun 11-15, 2018 Jul 16-20, 2018 Aug 13-17, 2018 Sep 17-21, 2018 Oct 15-19, 2018 Nov 12-16, 2018 Dec 10-14, 2018 FONTANA, CA Oct 30 - Nov 3, 2017 Mar 5-9, 2018 May 21-25, 2018 Jul 23-27, 2018 Oct 1-5, 2018 SAN LEANDRO, CA Oct 2-6, 2017 Jan 29 - Feb 2, 2018 May 7-11, 2018 Aug 6-10, 2018 VALLEY FORGE, PA Sep 18-22, 2017 Nov 13-17, 2017 Dec 11-15, 2017 Feb 5-9, 2018 Apr 9-13, 2018 May 21-25, 2018 Jun 18-22, 2018 Aug 20-24, 2018 Oct 8-12, 2018 Dec 3-7, 2018 SUBSTATION MAINTENANCE II HANDS-ON COURSE DAYS 3.6 CEU $1,975 AVAILABLE IN SPANISH This course is the next step after Substation I to enhance the skills needed to perform all substation tasks including a focus on common transformer configurations. It offers training on the components of power and distribution type transformers, including common insulating and cooling mediums and explains common transformer configurations. Upon completion of this course, students are able to inspect, adjust and perform insulation resistance, connection resistance and overpotential tests on air and disconnect switches as well as interpret results of earth resistivity tests and more. Explain the configuration and function of common equipment found in a substation Identify components of power and distribution type transformers, including common insulating and cooling mediums Describe and carry out AC tests performed on transformers Perform a nameplate exercise and calculate turns ratio of transformer wiring Summarize ASTM requirements for testing and sampling transformer gas and oil in transformers Outline storage battery maintenance REQUIRED FOR SUBSTATION MAINTENANCE CERTIFICATION - SEE PAGE 16 45

48 Nov 20-22, 2017 Jul 23-25, 2018 Jan 3-5, 2018 Oct 22-24, 2018 Apr 23-25, 2018 POWER FACTOR TESTING HANDS-ON COURSE DAYS 2.4 CEU $1,375 This course provides training that enables technicians to detect equipment insulation problems without making an internal visual inspection. Participants are trained to properly perform tests and interpret findings. Technicians who perform and evaluate the results of power factor tests can predict and prevent the failure of medium and high voltage transformers, including circuit breakers, bushings (transformers and circuit breakers), reclosers, switches, cables, lightning arrestors, liquid insulation, compound or oil filled cable terminations, rotating machinery (motors and generators), voltage regulators and insulating oils. : Outline the causes of insulation degradation and failure Summarize the modes of operation Connect leads and perform power factor tests Troubleshoot connections in the event of poor test results Perform temperature corrections and evaluate test results Determine maintenance to be performed based upon the test results Sep 18-22, 2017 Nov 27 - Dec 1, 2017 Jan 29 - Feb 2, 2018 Mar 19-23, 2018 Apr 30 - May 4, 2018 Jul 23-27, 2018 Sep 24-28, 2018 Nov 26-30, 2018 SAN LEANDRO, CA Oct 9-13, 2017 Aug 13-17, 2018 VALLEY FORGE, PA Oct 30 - Nov 3, 2017 Feb 12-16, 2018 Jun 25-29, 2018 Oct 15-19, 2018 Dec 10-14, 2018 TRANSFORMER MAINTENANCE & TESTING HANDS-ON COURSE DAYS 3.6 CEU $1,795 AVAILABLE IN SPANISH Students learn to install, maintain, repair or troubleshoot power transformers rated 765 kv or less. Participants will receive instruction on the filtering and drying out process to be performed on transformers. This course uses up-to-date test equipment and procedures for evaluating the condition of a transformer. Test results can provide predictive data which will guide maintenance activities and help to prevent catastrophic failure that may damage downstream equipment and endanger personnel. : Identify power/instrument and distribution transformer types, components and auxiliary equipment Demonstrate routine and diagnostic inspections and point out potential problems and hazards Interpret nameplate data and use the data to set up correct test procedures Simulate appropriate tests to evaluate the condition and perform maintenance on transformers Perform a simulation oil sampling, testing, drying, filling and filtering Explain gas sampling and testing Discuss test results to troubleshoot transformer problems 46

49 Oct 23-27, 2017 Aug 27-31, 2018 Feb 26 - Mar 2, 2018 Oct 22-26, 2018 May 21-25, 2018 ADVANCED TRANSFORMER MAINTENANCE & TESTING COURSE DAYS 3.6 CEU $2,095 AVAILABLE IN SPANISH HANDS-ON Power and instrument transformers are critical and expensive components of the electric energy system. Maintaining safe and reliable operation of them is essential. Technology has made the fundamental principles of energy transfer a complex set of mathematical algorithms used to improve the four main areas of a transformer s design: mechanical, electro-magnetic, dielectric and thermal. Before attending this training course it is recommended the attendee complete the Transformer Maintenance & Testing course. They should have previous knowledge of the different types of transformers and components. As well as become familiar with transformer operation and fundamental transformer testing. : Outline the service life of a transformer and the importance of transformer testing to ensure its integrity and estimate its age Demonstrate the various tests used to diagnose the condition of a transformer and how to analyze results Apply the SFRA fundamentals and its guidelines for interpretation Summarize the importance of the condition of the insulation system and how to evaluate it Illustrate the Dissolved Gas Analysis test to determine the presence of active fault condition Perform the Power Factor test and interpret the result Explain the Dielectric Frequency Response technique and its importance Paraphrase the definition of a current transformer, its features and applications for measurement and protection Sep 25-28, 2017 Nov 27-30, 2017 Jan 23-26, 2018 Mar 26-29, 2018 Jun 25-28, 2018 Jul 30 - Aug 2, 2018 Sep 4-7, 2018 Oct 29 - Nov 1, 2018 SAN LEANDRO, CA Nov 13-16, 2017 Feb 5-8, 2018 May 21-24, 2018 Aug 27-30, 2018 SEYMOUR, CT Mar 5-8, 2018 Aug 6-9, 2018 VALLEY FORGE, PA Oct 9-12, 2017 Feb 20-23, 2018 Apr 23-26, 2018 Jul 9-12, 2018 Nov 5-8, 2018 BATTERY MAINTENANCE & TESTING COURSE 475A 4 DAYS 3.2 CEU $1,405 HANDS-ON This course is designed for personnel responsible for battery systems in substations, power plants and other systems that require emergency DC power. This course provides an understanding of battery backup failures such as: excessive or micro cycling, improper charging, poor temperature control, installation errors, manufacturing deficiencies and operational errors. Battery and battery room safety requirements and inspection methods are also detailed along with personal protective equipment (PPE). Manufacturer installation and maintenance requirements are major components of this training. : List types of batteries and their operating principles Demonstrate battery maintenance and testing techniques Utilize correctly the various types of test equipment and hand tools Use NFPA 70E, IEEE 450, Megger Battery Testing Guide and battery installation and operating instructions to develop a battery/cell inspection form Perform correct maintenance of vented lead-acid batteries using the IEEE Standard 450, IEEE Recommended Practice for Maintenance, Testing and Replacement of Vented Lead-Acid Batteries for Stationary Applications Identify battery and battery room installation requirements per IEEE guidelines and NFPA 70E 47

50 ENGINEERING COURSES PROTECTIVE DEVICE COORDINATION FOR UTILITIES COURSE DAYS 2.4 CEU $1,720 HANDS-ON The goal of protective device coordination is to allow for normal equipment operation, ensure circuits open before equipment is damaged and limit outages to the smallest area through selectivity. A properly coordinated power system can prevent equipment damage and lost productivity. Evaluate a protection system for reliability, selectivity, speed, simplicity and economics Utilize SKM software to create and modify one line drawings and time current curves (TCCs) Interpret TCCs and damage curves Explain the application of directional, impedance (distance), differential, carrier, pilot wire, under-frequency and ground overcurrent protective relays Calculate CT burden impedances Coordinate protective relays for ground fault and line protection utilizing SKM PTW software Identify common protection schemes for generators, transmission lines, and distribution lines Jan 30 - Feb 1, 2018 Apr 3-5, 2018 Aug 21-23, 2018 Nov 19-21, 2018 POWER QUALITY & HARMONICS COURSE DAYS 3.2 CEU $1,575 LECTURE This course covers the fundamentals of power generation, distribution, quality, monitoring, and troubleshooting. Online and portable power monitoring and testing concepts are detailed. Power quality measurements and personal protective equipment based on requirements outlined in NFPA 70E Standard with troubleshooting mitigation methods are presented. Identify symptoms and causes of significant types of power quality problems Classify power quality events according to IEEE, ITIC (CEBNA) and public utility standards Explain proper application and interpret results of power quality monitoring equipment Recommend solutions including: UPS, line voltage regulators, transient (surge) suppressors, harmonic filters, line filters, power conditioners, k-rated, isolations, zig-zag transformers, proper wiring, grounding, etc. Oct 10-13, 2017 Feb 20-23, 2018 Apr 30 - May 3, 2018 Jun 26-29, 2018 Oct 9-12, 2018 SAN LEANDRO, CA May 14-17, 2018 VALLEY FORGE, PA Nov 6-9, 2017 Mar 5-8, 2018 Aug 13-16, 2018 FONTANA, CA Sep 18-21, 2017 Jan 16-19, 2018 Jul 30 - Aug 2, 2018 Note: Visit for a detailed list of equipment needed for these courses. Administrative rights to install software must be granted for successful course completion. 48

51 PROTECTIVE DEVICE COORDINATION FOR INDUSTRY COURSE DAYS 2.4 CEU $1,720 HANDS-ON This coordination study is an essential element of an arc flash study and is intended for engineers, supervisors and relay technicians that are responsible for the protection of industrial power systems. The goal of protective device coordination is to allow for normal equipment operation, ensure circuits open before equipment is damaged, and limit outages to the smallest area through selectivity. These studies are used to verify correct equipment ratings and settings, as well as assist in the selection of new equipment. Identify and explain application of common power studies Explain the application of fuses, low-voltage breakers, motor overload and overcurrent relays Utilize SKM PTW to create and modify one-line drawings and time current coordination curves (TCCs) Interpret TCCs and damage curves Coordinate protective devices to prevent thermal and mechanical damage to transformers, cables, and motors utilizing SKM PTW software Feb 27 - Mar 1, 2018 Aug 1-3, 2018 SHORT CIRCUIT ANALYSIS COURSE DAYS 3.2 CEU $1,730 HANDS-ON In this course, students learn to accurately predict current levels essential for equipment selection, protection and evaluation. The course is intended for engineers, supervisors, electricians and technicians that are involved in equipment selection/evaluation and protection of industrial and utility power systems. The results of short circuit studies are used in predicting incident energy (arc flash hazard levels) and completing a thorough protective device coordination study. Describe the types of studies performed on power systems Summarize the purpose and methods used when performing a short circuit analysis Perform mathematical operations on vectors, phasors, complex numbers, matrices and explain their application in the performance of a short circuit analysis Use mathematical tools to perform short circuit analysis Recognize the basic types of power system short circuits, and their configuration Use SKM to create a power system model and to calculate short circuit currents based on fault models May 1-3, 2018 Nov 13-15, 2018 Nov 6-9, 2017 Sep 4-7, 2018 Feb 5-8, 2018 May 29 - Jun 1, 2018 Dec 10-13, 2018 Note: Visit for a detailed list of equipment needed for these courses. Administrative rights to install software must be granted for successful course completion. 49

52 INFRARED COURSES CLEVELAND, OH Feb 5-9, 2018 Jul 9-13, 2018 Oct 30 - Nov 3, 2017 Jan 15-19, 2018 Mar 12-16, 2018 May 14-18, 2018 Jul 30 - Aug 3, 2018 Sep 10-14, 2018 Nov 12-16, 2018 FONTANA, CA Jan 22-26, 2018 Apr 9-13, 2018 Aug 6-10, 2018 Oct 29 - Nov 2, 2018 SAN LEANDRO, CA Nov 27 - Dec 1, 2017 Jun 4-8, 2018 Aug 20-24, 2018 SUMNER, WA Apr 30 - May 4, 2018 Oct 15-19, 2018 VALLEY FORGE, PA Dec 4-8, 2017 Mar 19-23, 2018 Jun 18-22, 2018 Sep 24-28, 2018 INFRARED THERMOGRAPHY, LEVEL I HANDS-ON COURSE 240A 4.5 DAYS 3.6 CEU $1,775 CERTIFICATION COURSE Students who complete the training requirements and a thermography field assignment will receive an Infrared Thermography Level I certification. The course teaches the basics of infrared, how to operate the infrared camera under different conditions, how to make a judgment of the measurement situation in the field and identify potential sources for error. The student will interpret thermograms and make informed decisions using heat transfer concepts to analyze thermal images. They will also learn to distinguish between hot spots and reflections as well as direct versus indirect readings. CERTIFICATION REQUIREMENTS Students are required to submit a complete infrared survey report within sixty (60) days after class that counts as one third of the final grade. REQUIRED EQUIPMENT Participants MUST provide an infrared camera, reporting software, and PC. Summarize the history of Infrared Thermography and give examples of the practical applications afforded by this technology Describe heat and its properties, contrasting it with temperature in terms of the properties each measures Describe the three modes of heat transfer as related to the heating of a surface Explain radiosity concepts and how they relate to the understanding of Infrared Thermography Demonstrate the operation of infrared equipment Perform an infrared survey and report the results of the survey 50

53 CLEVELAND, OH May 7-11, 2018 Jan 29 - Feb 2, 2018 Mar 5-9, 2018 Jul 16-20, 2018 Oct 22-26, 2018 FONTANA, CA Apr 23-27, 2018 Nov 5-9, 2018 SAN LEANDRO, CA Jun 25-29, 2018 SUMNER, WA Aug 27-31, 2018 VALLEY FORGE, PA Feb 26 - Mar 2, 2018 Sep 17-21, 2018 INFRARED THERMOGRAPHY, LEVEL II HANDS-ON COURSE 240B 4.5 DAYS 3.6 CEU $1,985 CERTIFICATION COURSE Infrared Thermography Level 2 training is designed for the practicing infrared camera user. It will also benefit the student who has a desire to advance past the basics of infrared thermography. The course will expand past the basics of infrared theory. There is discussion on camera operation under different conditions and how to make judgments of the measurement situation in the field and identify potential sources for error. After successfully completing this course the student will be able to do IR inspections following written guidelines, and report the results of this inspection using industry recognized standards. The learning objectives, contact hours and written exam of AVO Training Institute are based on the requirements outlined by ANSI/ASNT CP-105 and CP-189 of the American Society for Non- Destructive Testing. CERTIFICATION REQUIREMENTS Students are required to submit a complete infrared survey report within sixty (60) days after class that counts as one third of the final grade. REQUIRED EQUIPMENT Participants MUST provide an infrared camera, reporting software, and PC. PREREQUISITE: (MANDATORY/NO EXCEPTIONS) A current IR Level I certification is required to be a participant in the IR Level II course. Please send a copy of a current IR Level 1 certification with the registration. Discuss more in depth concepts of heat transfer, infrared theory and spatial resolution Outline and practice thermal imaging survey and measurement techniques Discuss radiosity concepts Explain the basics of predictive maintenance thermography and inspection program Summarize the different applications of thermography 51

54 MELANIE FARLEY NATIONAL SALES MANAGER THE PERSONAL TOUCH PAUL JACKSON ACCOUNT EXECUTIVE SOUTH US COREY ADAMS ACCOUNT EXECUTIVE NORTHEAST US BRIDGETTE LINVEL ACCOUNT EXECUTIVE WEST US BERNADETTE PITTS ACCOUNT EXECUTIVE MIDWEST US ACCOUNT EXECUTIVE MOUNTAIN US BRITTANY SENGLIN SALES SUPPORT REPRESENTATIVE RITA KERBYSON INTERNATIONAL SALES MANAGER