Developments in the Americas Sector

Transcription

1 in the Americas Sector Colin Clarke Bombardier Aerospace Chairman, Americas Aerospace Quality Group October 12,

2 Agenda Introduction to the AAQG AAQG Membership AAQG Leadership Team in the AAQG Reminder 2

3 Introduction The Americas Aerospace Quality Group (AAQG) is the G-14 G Committee of SAE International. It is a cooperative organization within the aerospace and defense industries including North, South and Central America, hence the Americas. 3

4 Introduction (cont d)? 4

5 Introduction (cont d) The AAQG committee membership is twenty (20). Participants in the AAQG include Original Equipment Manufacturers, Accreditation Bodies, Certification Bodies, government representatives, academia and suppliers. 5

6 AAQG Membership AAQG Voting Member Stanley Graves Leslie Dodge Colin Clarke TBD Dana Lakeman Peter Kern David Trucksis John Stine Scott Collinge Larry Kibble Michael Hayward Gordon Rosner George Udris Rich Vinton Elizabeth Ray David Becker Rick Wilcox Jack Fletcher Susan Armstrong John Speight Employer ATK Boeing Bombardier Aerospace Embraer GE Aircraft Engines Goodrich Gulfstream L-3 3 Communications Honeywell Lockheed Martin Northrop Grumman Orbital Parker Aerospace Raytheon Rockwell Collins Rolls-Royce Royce North America Spirit Aerosystems Textron - Bell Helicopter United Technologies Corp. Vought IAQG Voting Member Barbara O DellO Mario Langlois Alfredo Correa Robert Briggs Dave Perryman Scott Collinge Larry Kibble Michael Hayward Lee Tait George Klug 6

7 AAQG Leadership Team Colin Clarke Bombardier Aerospace Chairman Leslie Dodge Boeing Projects Chair TBD Vice-Chairman Jaye Omberg Lockheed Martin Membership Chair Jack Fletcher Bell Textron Secretary Becky Lemon SAE Treasurer Scott Collinge Honeywell Communications Tim Lee Boeing RMC Chair Jay Myers SAE Representative Ed Bayne Boeing OMS Mike Roberts Boeing SAE Institute Dale Gordon MPC Products Past-Chairman Industry Segment Chairs Chet Date Honeywell Nadcap Andy Brindisi Pratt & Whitney Civil Larry Patzman Lockheed Martin Space Michael Hayward Northrop Grumman Defense 7

8 The subjects covered under this heading are AAQG specific: Standardization for Notification of Change (NOC). Production and Airworthiness Certification Issues Forum (PACIF). Critical Safety Items (CSI). AS 9015 Supplier Self Verification Program Industry Forums 8

9 Notification of Change This project is the result of a General Aviation Manufacturers Association initiative. The objective of this project is to have a process that is endorsed by the Authorities and industry for communicating changes to the Design Authority. 9

10 Notification of Change (cont d) This process is limited to suppliers that have design responsibility for the product and to suppliers providing design services to any aviation, space or defense customers. It includes a standardized decision tree and data submittal protocols. 10

11 Notification of Change (cont d) The Change Types in this process are: Changes that require Customer Acceptance prior to implementation. Changes that May require Acceptance prior to implementation (Customer/Contract dependent). Changes implemented concurrent with Notification for Customer Acceptance 11

12 Notification of Change (cont d) Non-configuration Changes that are Recorded but not Submitted to the Customer. 12

13 Notification of Change (cont d) The next steps in the development of this process are to: Engage the Authorities Finalize the Document and pilot the process. Present the results to the AAQG and to the IAQG for possible expansion to the other sectors. Ballot the Document and close the project. 13

14 PACIF The AAQG has agreed to participate in this forum with the FAA to discuss issues or enhancements relating to production and airworthiness issues. The General Aviation Manufacturers Association is leading this activity and other participants include the Aerospace Industries Association and the Modification and Replacement Parts Association. 14

15 PACIF (cont d) The goal is to provide a forum for open dialogue between the FAA and industry. The AAQG invitees are: AAQG Chair AAQG Vice Chair AAQG Civil Segment Chair IAQG Civil Authorities Relationship Growth Strategy Leader (member of the AAQG). 15

16 Critical Safety Items A study has been launched to determine the feasibility of developing a Quality System Standard for Critical Safety Items. This standard will provide a set of quality system flow down requirements based on CSI Law, CSI Handbook and industry input. This standard will result in consistent evaluation criteria for CSI suppliers. 16

17 Supplier Self Verification Program This project was undertaken in response to concerns that no minimum requirements exist for granting, maintaining and terminating delegation of product verification to a supplier. One of the benefits identified was that this delegation process will drive the responsibility and accountability for quality back to the organization that produces the product. 17

18 Supplier Self Verification Program (cont d) The outcome was the creation of the standard AS 9015 that was published in September

19 Industry Forums These face to face sessions are conducted periodically based on interest in a topic. Past topics have included: First Article Inspection conducted using Digital Data sets. Supplier Delegated Inspection Systems. Systems employed to flow down requirements for safety critical parts. 19

20 Industry Forums (cont d) These sessions are hosted by AAQG member companies and are open to AAQG council members and visitors. They usually last 1 to 2 days. Participants are encouraged to discuss their approach to the topic. 20

21 Reminder The AAQG remains fully aligned with the IAQG strategy and initiatives The unique projects in the AAQG are undertaken as a result of request from Authorities and/or other industry segments in the Americas. 21