HEP Tech Co., Ltd. Company Profile

Transcription

1 HEP Tech Co., Ltd. Company Profile

2 HEP Group Structure 1. HEP Tech Co., Ltd. Head office / Global sales team / R&D center 2. HEP GmbH Europe sales office / Warehouse / Europe R&D center & DEKRA certified lab 3. WeiSen Electronic Co., Ltd. ISO 9001 & OHSAS18001 & ISO14001 certified factory & China sales service center

3 HEP Group HEP Tech Co., Ltd. is incorporated in 2002 in Taiwan. It functions as the Group s Headquarters. Located in Taichung, the HQ covers a area of 2718 sq m, with 6 stories, including 2-story basements, usable floor space of 8,235 sq m. It houses the management, global sales team, and HEP s 2nd R&D Center outside of Germany.

4 HEP Organization Chart - Taiwan

5 HEP GmbH, Germany HEP GmbH was Founded in 2001, located in Schalksmühle, Germany with the sales & R&D center and warehouse. HEP GmbH merger with HEP Engineering GmbH (HEP Group s european development center) in DEKRA certified lab

6 Production Facilities Guangdong Taiwan Factory ZhuHai, China

7 Factory - Zhuhai WeiSen Electronic Co., Ltd. Total occupied ground : 15,000 sq meter The area of factory : 3,008 sq meter Assembly line : 4 lines Number of employees : 320 Sales object : Export - oriented ISO 9001 KEMA Certified OHSAS18001 ISO14001 Certified OHSAS18001 occupational heath & safety management system ISO14001 environmental management system

8 Facility - Production Line

9 Facility - SMD Technology Using SMD technology for PCB chips mounting. 0.27sec/pc mounting speed ± 5 degrees of angle deviation of component mounting on PCB

10 Facility - Manual Mounting

11 Inspection Equipment In-Circuit Tester Inspection items : Open circuit Short circuit Defective component Wrong component Incorrect mounting

12 Inspection Equipment - Function Test 100% function test Input power test Input voltage test Power factor test Operating frequency test Lumen Factor test Ambient Temperature test Protection Test

13 Inspection Equipment - Burn-in Room 100% burn-in test from 4 to 8 hours

14 Inspection Equipment - RoHS Test Lab X-ray Spectrometry Material analysis for 6 hazardous substances: Pb (Lead) Cr+6 (Hexavalent chromium) Cd (Cadmium) Hg (Mercury) PBB (Polybrominated biphenyls) PBDE (Polybrominated diphenyl ether)

15 Inspection Equipment - EMI Radiated / Conducted Emissions Test Lab Pre-test 743 semi anechoic chamber L7m x W4m x H3m Shielding effectiveness: Test frequency in accordance to IEEE-299 / EN , 30MHz to 10 GHz ( 100dB). Radiated / Conducted Emissions test: Test according to the standard of EN (CISPR 15)

16 Group Total Production Capacity - Monthly Volume Product Factory LED Drivers WeiSen 2,860,000 3,150,000 3,000,000 Electronic Transformer WeiSen 330, , ,000 Electronic Ballast WeiSen 750, , ,000

17 Global Sales Distribution - Product Sold by Region Updated : 2018

18 Global Sales Distribution Updated : 2018

19 HEP Range of Products - Dimming Technology Dimming LED drivers - 1~10V, Phase-control, PWM, Dali Electronic 0/1-10V / Phase-control dimmable ballasts - for T5, T8, Linear & Compact Fluorescent Lamps Digital Addressable Dimming Ballast- DALI - for T5, T8, Linear & Compact Fluorescent Lamps

20 HEP Range of Products - Standard Series LED drivers constant current & constant voltage Electronic ballasts for T5, T8 Linear & Compact Fluorescent Emergency inverter for T5, T8 Linear & Compact Fluorescent & LED Electronic transformers for Halogen lamp

21 Dimming LED Drivers - 1~10V, Phase-control, PWM, DALI, Full dimming level from 3%~100% for single color or mucho color via 1-10V, phase-control, PWM, Dali control O/P channel drive 120mA up to 2000mA constant current adjustable via RSET / Dip Switch

22 Electronic 0/1-10V Dimmable Ballasts - for T5, T8, Linear & Compact Fluorescent Lamps Low inventory costs because one ballast type operates several wattages and lamp type. Automatic identification of lamp type. Flicker-free dimming from 1%-100% of light flux.

23 Digital Addressable Dimming Ballasts - for T5, T8 Linear Fluorescent Lamps Ultra low energy consumption < 120V of input voltage range in stand-by, lamp failure, no-load status. In compliance of Europe Energy Efficiency Index of A1 BAT Full-range continuous dimming from 100% light output down to 1% Dimming type- DALI, KNX control

24 LED Drivers - Constant Current, Constant Voltage Comprehensive range from 3-120W DC output with constant current of 120mA up to 1400mA for high power LEDs. Low ripple current design makes direct lighting perform superior quality Comprehensive application from W DC output with constant voltage of 12V or 24V for regular LEDs.

25 Electronic Ballasts - for T5, T8, Linear & Compact Fluorescent Lamps Automatic identification of lamp type. Patented pre-heating circuit & warm start within 1 sec. Non stroboscopic effects. High-frequency lamp operation (over 45kHz).

26 Emergency Inverter All-in one design suited for T5, T8 and compact fluorescent lamps ranged from 5-80W, also for LED Operate in 1x, 2x, 3x, 4x lamp of luminaire with conventional or electronic ballast. Auto self-test functions and testing push button. Work with NiCd or NiMh battery Battery automatically discharged-n-charged at intervals of every 3 months

27 International Certification Europe Australia SAA America China Japan HEP Products are ENEC Certified

28 2010 Hong Kong International Light Fair

29 2011 Hong Kong International Light Fair

30 2012 Frankfurt Light + Building Show

31 2013 Hong Kong International Light Fair

32 2014 Frankfurt Light + Building Show

33 2014 Hong Kong International Light Fair

34 2015 Hong Kong International Light Fair

35 2016 Frankfurt Light + Building Show

36 2018 Guangzhou International Lighting Exhibition

37 Thank you